Prapat Apisaksirikul

Sandbox Pedal Board

Tester

Der BOSS CH-1 Super Chorus ist ein klassisches Modulationspedal, das seit 1989 ein fester Bestandteil der BOSS Compact-Serie ist. Es wurde entwickelt, um einen sauberen, brillanten Chorus-Sound mit kristallklaren Höhen zu liefern, was ihn vom wärmeren, dunkleren Charakter früherer Analogmodelle unterscheidet. Das Pedal verfügt über eine Schnittstelle mit vier Reglern zur Steuerung von Effektpegel, EQ, Rate und Tiefe, was eine präzise klangliche Gestaltung ermöglicht. Es umfasst einen Mono-Eingang und Stereo-Ausgänge, die bei Verwendung mit einem dualen Verstärker-Setup einen weiten räumlichen Effekt ermöglichen. Während das Design ursprünglich mit analoger Schaltung und Bucket-Brigade-Device (BBD)-Chips gebaut wurde, ging es Anfang der 2000er Jahre zu einer digitalen Schaltung über, wobei sein charakteristisches Klangprofil beibehalten wurde.

The BOSS CH-1 Super Chorus is a classic modulation pedal that has been a staple of the BOSS compact line since 1989. It is designed to deliver a clean, brilliant chorus sound with crystal-clear highs, distinguishing it from the warmer, darker character of earlier analog models. The pedal features a four-knob interface for controlling effect level, EQ, rate, and depth, allowing for precise tonal shaping. It includes a mono input and stereo outputs, enabling a wide spatial effect when used with a dual-amplifier setup. While originally built using analog circuitry with Bucket Brigade Device (BBD) chips, the design transitioned to a digital circuit in the early 2000s while maintaining its signature sonic profile.

BOSS

Demo by Roland UK

Demo by AskAGuitarPro

Product Page

Manual

CH-1 Super Chorus

QuickMount Type E

Pedal-Montageplatte für Standard-Boss-Pedale

Pedal Mounting Plate For Standard Boss Pedals

Isen Ritchie

DS-1W Distortion

PedalSafe Type E1

Schutzabdeckung & RockBoard-Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & RockBoard Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Schutzabdeckung & universelle Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & Universal Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Flavio Salcuni

It's active Treble, Bass ,Gain and Volume controls allow for limitless tone shaping. Added Gain switch for even fatter tones!. The RC Booster V2 offers a super transparent 20db+ clean boost and a +- 15db 2 band active EQ without ever compromising the integrity of the original TONE. It provides a solution to sound degradation, caused by long instrument cables and/or long effect chains between guitar and amp, by strengthening the original signal. True bypass for eliminating any signal interference when switched off. Can be used with AC adaptor (optional) or 9V Battery.

Xotic

Review by Humbucker Music

Review by bonedo

Demo by Peter Honoré

Demo by Buddy Blues

Official Product Video

RC Booster V2

stephen cullen

Das SD-1 Super OverDrive-Pedal erzeugt die warme, natürliche Verzerrung eines übersteuerten Röhrenverstärkers und behält dabei die subtilen Nuancen der Zupftechnik eines Spielers bei. Dies ist eines der subtileren und sanfteren Overdrive-Pedale von BOSS, perfekt für Blues und Rock.

The SD-1 Super OverDrive pedal produces the warm, natural distortion of an overdriven tube amplifier while maintaining the subtle nuances of a player's picking technique. This is one of BOSS' more subtle and smooth overdrive pedals, perfect for blues and rock.

Official Website

Demo by Honpo Nori-chan

Demo by  GUITARGUITAR

Review by The Gear Page

SD-1 Super Overdrive Vintage

BD-2W Blues Driver (Waza Craft)

Wie oft hast du schon vor deinem Lieblings-Ambient-Pedal gesessen und das Gefühl gehabt, dass du wochenlanges Training bei der NASA brauchst, um es zu benutzen? Knöpfe, Schalter, Schieberegler... Es ist oft SO schwer und frustrierend, schnell einen brauchbaren Ton auf diesen Dingern zu finden... Als wir zum ersten Mal über ein Ambient-Pedal nachdachten, hatte die Benutzerfreundlichkeit oberste Priorität, gleichrangig mit einem erstklassigen Klang, der sich mit Pedalen zu einem doppelt so hohen Preis messen kann.

Wie würdest Du ein Pedal wie das Wampler Ethereal beschreiben? Trifft „Ambient Heaven“ zu? Ist es das Tor zwischen dem realen Leben und der Astralebene? Oder ist es einfach nur wunderschön? Es ist schwer zu sagen, welchen Ausdruck man verwenden soll, wenn man über das Pedal spricht, denn sie alle passen perfekt... und natürlich ist es so einfach zu bedienen, dass man sofort die perfekten Ethereal-Sounds erhält.

How many times have you sat in front of your favorite ambient pedal and felt like you need weeks of training at NASA to use it? Knobs, switches, sliders…It’s often SO hard and frustrating to find a usable tone on those things quickly... Keeping that firmly in mind, when we first considered making an ambient pedal, ease of use was a top priority, right up there with top tier quality tone on par with pedals at twice the price.

How do you describe a pedal like the Wampler Ethereal? Does ambient heaven cover it? Is it the gateway between real life and the astral plane? Or is it just gorgeous? It’s hard to know which phrase to use when talking about it, because they all match it perfectly… plus, of course, so easy to use you’ll be getting those perfectly Ethereal tones instantly.

Wampler

Demo by ProGuitarShopDemos

Demo by  N Stuff Music

Demo by Sweetwater

Review by delicious-audio.com

Review by proaudioland.com

Review by pedalauthority.com

Review by amazona.de

Ethereal Delay and Reverb

The HardWire RV-7 Stereo Reverb pedal packs seven great Lexicon reverbs in its rugged enclosure, plus, its true bypass keeps your signal pristine when it's turned off. The pros choose pedals with true bypass because it's the only way you're going to keep your tone exactly the way you want it between your guitar and amp. The RV-7 also features high-voltage operation for improved headroom over "conventional" pedals, plus controls for Level, Speed, Depth, and Chorus Type, as wells as a handy Tails On/Off switch for seamless operation when switching. 

DigiTech

Review by gearspace

Demo by session

Review by guitartest.de

Hardwire RV-7

Für 7-11 FX-Pedale - **722 x 142 mm / 28.43" x 5.59"** - erhältlich mit Gig Bag oder Flight Case

For 7 - 11 FX pedals - **722 x 142 mm / 28.43" x 5.59"** - available with Gig Bag or Flight Case

jan roger hafsund

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 1 V2 ist eine Pass-Through-Box, die speziell für Gitarristen und Bassisten entwickelt wurde. Du kannst das MOD 1 V2 nutzen um mehrere Pedale deines Setups im Front End und im Effekt-Loop des Verstärkers zu postieren (4-Kabel Methode) oder die vier TRS-Anschlüsse als zentralen Zugang und Ausgang des Boards nutzen. Die XLR-Through-Verbindung kann als Signalausgang vom Pedalboard zum Mischpult oder zur PA verwendet werden.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 5 x 6,3 mm TRS thru
- 1 x XLR thru (männlich vorne / weiblich hinten)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 5 x 6,3 mm / ¼" TRS thru
- 1 x XLR thru (male front / female back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR, IEC & Barrel Patchbay

Rectifier

ch ray

Line 6 HX Stomp ist ein professioneller Gitarrenprozessor, der den Klang von Helix-Verstärkern, -Boxen und -Effekten in einem ultrakompakten Pedal liefert. Egal, ob Sie lieber ein traditionelles Amp-and-Pedal-Setup spielen oder direkt auf die Bühne oder ins Studio gehen, HX Stomp lässt sich nahtlos in eine Vielzahl von Umgebungen und Anwendungen integrieren. Das HX Stomp-Gitarrenpedal verwendet dieselbe DSP- und HX-Modellierungstechnologie wie seine größeren Helix-Brüder und passt dennoch problemlos auf Ihr Pedalboard oder sogar in die Tasche Ihres Gigbags. Es gibt über 300 Ampere, Kabinen und Effekte – einschließlich eines Loopers. HX Stomp enthält dieselben HX-Modelle wie die Produkte der Helix-Familie sowie die Legacy-Effektbibliothek der Line 6 M-Series-Pedale und Stompbox-Modellierer wie den DL4. Verwenden Sie es als "Super-Stompbox", als Backup- oder Travel-Rig, als zusätzlichen Tonexpander in Kombination mit anderen Modellierern, als Audio-Interface - oder sogar als komplettes Gitarren- oder Bass-Rig.

Line 6 have been at the forefront of the digital modelling world for over 20 years now, pushing the boundaries of guitar technology is nothing new for them and their flagship product, the Helix, has taken the guitar world by storm. With the scaled down Helix, the HX, becoming a go to for players, its latest version, the HX Stomp is sure to generate loads of interest!

The HX Stomp is the ultimate streamlined version of this superstar pedal. Constructed as a 3 pedal unit, the HX Stomp features the same processor as the Helix, meaning you get over 300 effects including legacy lines from the M Series, 8 simultaneous amp, cab and effects blocks, TRS dual expression pedal inputs and a stereo effects loop, it's a serious pedal!

It's super comprehensive but really user intuitive. Built with the working player in mind, it has a solid aluminium construction that can take the rigours of the road, perfect on stage or in the studio, the Helix is the future of multi effects.

LINE 6

Review by musicradar

Review by Gitarre & Bass

Demo by Guitar Bonedo

Demo by Bernd Kiltz - Gitarrenvideos

HX Stomp Black

PedalSafe Type L6

QuickMount Type L6

Pedal-Montageplatte für LINE6 HX Stomp Pedale

Pedal Mounting Plate for LINE6 HX Stomp pedals

Schutzabdeckung & RockBoard-Montageplatte für LINE6 HX Stomp Pedale

Protective Cover & RockBoard Mounting Plate For LINE6 HX Stomp pedals

Schutzabdeckung & universelle Montageplatte für LINE6 HX Stomp Pedale

Protective Cover & Universal Mounting Plate For LINE6 HX Stomp pedals

- Multi-Watt™ channel assignable power amp allows you to assign either 2 or all 4 EL-34 power tubes to each channel for power ratings of 50 or 100 watts of class A/B power via independent 50/100 watt power switches
- 4xEL-34, 5x12AX7, 2x5U4
- Fixed Bias
- 2 Independent Channels: Channel 1 = Fat Clean, Tite Clean, Crunch; Channel 2 = Crunch, Tite Gain, Fluid Drive
- Channel Assignable Dual Rectification with Recto Tracking™ (Diode or Tube Tracking)
- Independent gain, treble, mid, bass, presence & master controls per channel
- Bold/Spongy “Variac” switch
- Output Level control (over all channels when activated)
- Footswitchable Solo Level control (over all channels when activated)
- Fully Buffered FX Loop with Send Level Control (over all channels when activated)
- True “Hard” bypass switch that removes FX Loop, Output Level & Solo Level controls from signal path
- Switching jacks on back for channels 1, 2 & solo
- 2 button footswitch (Channel 1/2 & Solo)
Width: 25 1/2"

Mesa Boogie

Stiletto Deuce Stage II

Adzim Ezani

HX® One is a powerful stereo effect pedal in an ultra-compact enclose that easily fits onto any pedalboard. It features intuitive controls, 250+ effects taken from HX family processors, a unique Flux Controller, a jack for connecting an optional expression pedal or two footswitches, adjustable input impedance, MIDI capabilities, and a choice of true or buffered DSP bypass.

Demo by Line 6

HX One

QuickMount Type C

Pedalmontageplatte für große vertikale Pedale

Pedal Mounting Plate For Large Vertical Pedals

Das Electro Harmonix Oceans 12 ist ein Stereo-Reverb-Pedal, das, wie der Name schon erahnen lässt, mit gleich 12 verschiedenen Reverb-Modi den Spieler beglücken möchte. Damit hat das Oceans 12 im Gegensatz zum seinem ebenfalls von uns getesteten Vorgänger, dem Oceans 11, noch einen Algorithmus mehr an Bord. Viel entscheidender ist aber die Möglichkeit, gleich zwei Reverbs parallel oder in Serie zu schalten, und das in Stereo.

The EHX Oceans 12 is the Oceans 11’s big brother with even more reverbs and functionality. It features two simultaneous, independent, stereo reverb engines, series and parallel control for the dual reverbs, 24 presets and advanced I/O allowing for stereo in/out or mono send/return with pre and post reverb options. The pedal also includes a new Tide Control for stereo image alteration, a Lo-fi Control, an infinite attenuation control and an input jack for external expression and 3-button footswitch control.

A Tails switch provides a choice of whether the reverb effect fades out naturally or stops immediately when the pedal is switched to bypass. In most settings the pedal is also capable of producing infinite reverb which can be played over with a different reverb effect.

The Oceans 12’s reverbs are:
• ROOM – two modes: reverb algorithms modeled after a lively room and a spacious performance hall
• SPRING – two modes: vintage 1962 Fender® 6G15 tube reverb emulation and the spring algorithm from the EHX Holy Grail
• PLATE – two modes: two emulations of the smooth, metal plate reverb often used in high-end recording studios during the 1960s and ‘70s
• REVERSE – two modes: a reverse reverb effect as well as true reversed echoes
• ECHO – three modes: a digital delay with various echo rhythms feeding into a plate reverb
• TREM – three modes: a classic, periodic volume envelope with various shapes applied to both the wet and dry mix of a hall reverb
• MOD – three modes: combinations of chorus and flange reverbs that create rich reverb tails
• DYNA – three dynamic, experimental reverb algorithms: swell, gate and duck
• AUTO-INF – three modes: auto-infinite reverb (w/optional chorus or flange) that “listens” to your playing and crossfades to a new reverb wash upon detection of newly struck notes.
• SHIMMER – two modes: two configurations of a rich octave-shifted reverb wash
• POLYPHONIC – two modes: two configurable bi-directional pitch shifts that add dimensionality to the reverb tail
• RESONANT – two modes: reverb excited by tunable resonators and configurable self-oscillating filters on the reverb tail

2 simultaneous, independent, stereo reverb engines
Series and parallel control for the dual reverbs
24 presets
Stereo in/out or mono send/return with pre and post reverb options
Tide Control for stereo image alteration
Lo-fi Control
Infinite attenuation control
Tap tempo to set your pre-delay time, echo time and more
Input jack for external expression and 3-button footswitch control
Power supply included

Electro-Harmonix

Product Page 

Review by PREMIER Guitar 

Review by AMAZONA 

Review by bonedo  

User Manual

Demo by Premier Guitar 

Oceans 12 Dual Stereo Reverb

PedalSafe Type C

Schutzabdeckung & RockBoard-Montageplatte für große vertikale Pedale

Protective Cover & RockBoard Mounting Plate For Large Vertical Pedals

Schutzabdeckung & universelle Montageplatte für große vertikale Pedale

Protective Cover & Universal Mounting Plate For Large Vertical Pedals

David Litaba

MOD 11 Modulator

PedalSafe Type A1.1

QuickMount Type A

Pedal-Montageplatte für Standard-Einzelpedale

Pedal Mounting Plate For Standard Single Pedals

Schutzabdeckung & RockBoard-Montageplatte für MXR® Standardgröße und Dunlop® Echoplex Delay Pedale

Protective Cover & RockBoard Mounting Plate For MXR® standard size and Dunlop® Echoplex Delay pedals

Schutzabdeckung & universelle Montageplatte für MXR® Standardgröße und Dunlop® Echoplex Delay Pedale

Protective Cover & Universal Mounting Plate For MXR® standard size and Dunlop® Echoplex Delay pedals

Nano Small Stone

RockBoard

Mit dem neuen Kirk Hammett Cry Baby Wah kannst du jetzt den gleichen Killer-Wah-Sound wie Kirk haben. Entwickelt in enger Zusammenarbeit mit der Metal-Gitarren-Ikone selbst, wurde es akribisch abgestimmt und optimiert, um den Wah-Sound zu liefern, der Metal-Soli revolutioniert hat. Dies ist der legendäre Ton, den Kirk auf Tour mit seinem Cry Baby Rack Wah erzeugt. Dieses Pedal ist außergewöhnlich gleichmäßig in der Ansprache, wenn du dich von der Ferse bis zu den Zehen bewegst, mit einem dicken Top-End und vollem Dynamikbereich.

Now you can command the same killer wah tone as Kirk with the new Kirk Hammett Cry Baby Wah. Developed in close collaboration with the metal guitar icon himself, it has been meticulously tuned and tweaked to deliver the wah sound that revolutionized metal solos. This is the legendary tone that Kirk dials in on tour using his Cry Baby Rack Wah. Dunlop's engineers took Kirk's EQ, volume and tone settings—reflecting decades of blazing Cry Baby riffology—and reproduced them with exacting precision. This pedal is exceptionally even in response as you move from heel to toe, with a thick top end and full dynamic range. Dare to step into the footprint of a giant. Own a piece of the legend: the Kirk Hammett Signature Wah from Dunlop.

Dunlop

Review by SweetWater 

Demo by Guitar World 

Demo by SweetWater 

KH95 Kirk Hammett Signature Cry Baby Wah

QuickMount Type M

Pedal-Montageplatte für Dunlop Cry Baby Wah-Pedale

Pedal Mounting Plates For Dunlop Cry Baby Wah Pedals

The EHX Oceans 11 is a compact, affordable pedal packed with advanced functionality and 11 reverb styles ranging from essential to exotic.

Oceans 11

PedalSafe Type A2

Schutzabdeckung & RockBoard-Montageplatte für ELECTRO HARMONIX Nano Series und MXR Effektpedale mit Standardgehäuse (2 In & 2 Out) und für die meisten Effektpedale mit den Gehäusemaßen von ca. 112 x 60 x 30 mm

Protective Cover & RockBoard Mounting Plate For ELECTRO HARMONIX Nano Series and MXR effect pedals with standard enclosure (2 In & 2 Out) as well as for most other effect pedals with enclosure dimensions of about 112 x 60 x 30 mm

Schutzabdeckung & universelle Montageplatte ELECTRO HARMONIX Nano Series und MXR Effektpedale mit Standardgehäuse (2 In & 2 Out) und für die meisten Effektpedale mit den Gehäusemaßen von ca. 112 x 60 x 30 mm

Protective Cover & Universal Mounting Plate For ELECTRO HARMONIX Nano Series and MXR effect pedals with standard enclosure (2 In & 2 Out) as well as for most other effect pedals with enclosure dimensions of about 112 x 60 x 30 mm

Roberto Beretta

Sennheiser

XSW-D

Review by Bonedo 

Demo by Thoman's Guitars & Basses

Bad Monkey

The GRID SLAMMER™ overdrive pedal produces a variable boost in gain over a wide range with a classic, guitar-centric midrange bump that enhances many different playing styles. It’s a true overdrive “specialist” that covers an amazing array of what many top players consider the most expressive and musical ranges of overdrive. From sweet, subtle breakup to a harmonically smoldering overdrive that can both sting and sing, the GRID SLAMMER sets a new bar in legendary overdrive! 

Demo by EytschPi42

Grid Slammer

Featuring seven inspirational Lexicon® reverbs, the DigiTech® Polara will be the new architect of your soundscape, defining space and adding dimension to your playing. The Polara’s flexible reverbs cover a full spectrum, from the intimate warmth of “Room”, to the vast expansiveness of “Hall”, through time with the cosmic power of “Reverse”, and anchored by Lexicon’s revered “Modulated”, “Plate” and “Spring” reverbs. In addition to those classics, the Polara introduces the new “Halo” reverb. The “Halo” reverb with cascading octaves interspersed in the reverb decays will cast a heavenly glow over your tone. With its new, compact size and soft-touch vacuum-style footswitch, the Polara truly represents the latest evolution in DigiTech pedal design. We’ve put years of experience into every detail of its mechanical and sonic blueprint. The Polara offers independent Level, Liveliness, Decay and Type controls; Stereo Inputs and Outputs; a Soft Click Footswitch; and a Reverb Tails On/Off Toggle Switch. It is true bypass, and uses a 9V DC power supply to easily integrate into your existing pedalboard.

Review by bonedo 

Quick Start Guide

POLARA

Das Digitech Obscura Altered Delay Pedal gehört zu der Effektgattung, die als essentieller Bestandteil auf den allermeisten Effektboards zu Hause ist und entsprechend zahlreich auch in den unterschiedlichsten Ausführungen im Markt angeboten wird. Während in den letzten Jahren die Anhänger der Analogtechnik wieder vermehrt ihre geliebten Vintage-Delays mit Originaltechnologie finden konnten, versucht die digitale Fraktion, außer mit hoher Signaltreue, Programmierbarkeit und vielen weiteren mehr oder weniger alltagstauglichen Gimmicks, auch mit der möglichst originalgetreuen Nachbildung der legendären analogen Echoeffekte zu punkten.

The Obscura Altered Delay from DigiTech allows you to turn your delays upside down and inside out. The Obscura’s four delay types can be darkened, degraded and distorted on the fly with the stacked Tone and Degrade controls. Combine these controls with the Obscura’s Repeat/Hold feature and lose yourself in long, trippy, gurgling repeats or backwards-manipulated sonic mayhem. In addition to its Tone and Degrade controls, the Obscura features independent Level, Delay Mode and stacked Time and Repeats controls. Complimenting those versatile controls, the Obscura offers four excellent-sounding Analog, Tape, Lo-Fi, and Reverse types, Tap Tempo mode with Beat Divisions, Stereo Inputs/Outputs, a Delay Tails On/Off Switch and True Bypass circuitry. With its compact size and vacuum-style footswitch, the Obscura furthers DigiTech’s evolution in pedal design. We’ve put years of experience into every detail of its mechanical and sonic blueprint. The Obscura uses a 9V DC power supply to easily integrate into your existing pedalboard.

Review by Guitar 

Review by Guitarre&Bass 

Demo by ProGuitarShopDemos 

Demo by Gear4music

OBSCURA

The pxl-live is the newest member of the joyo pxl series programmable pedal controllers - pxl4, pxl8, pxl-pro. The pxl-live is a very powerful pedal controller. It not only has dual 4 channel outputs like the pxl-pro, and dual (relay)switch outputs for channel switching, it also has MIDI out. Programmable MIDI commands can be sent enabling you to control MIDI enabled devices such as: effect pedals, effects racks, keyboards or amps through the MIDI port. The pxl-live can send MIDI cc and MIDI program change commands at the same time and will allow “Hands free”control of your computer recording software. For musicians who own a lot of musical gear, the pxl-live will be the perfect pedal controller to make life easier. 

JOYO

Review by reddit /guitarpedals

PXL-LIVE Loop Switcher

Für 9-15 FX-Pedale, 1 MOD-Slot - **622 x 330 mm / 24.49" x 12.99"** - erhältlich mit Gig Bag oder Flight Case

For 9 - 15 FX pedals, 1 MOD slot - **622 x 330 mm / 24.49" x 12.99"** - available with Gig Bag or Flight Case

juan pablo sosa

Brian  Nilton

American Sound reproduces the sound of a Fender 57 Deluxe amp, which performs great from clean, driven, and everywhere in between.

Demo by The Pedal Picassos

Demo by Roly Platt

Demo by Andrew Clarke 

Demo by intheblues

Demo by Budget pedal Chap 

Review by Neil Bruce, spencerbruce.com

Review by Anthony Sostre, tonealchemists.com

JF-14 American sound

Paulo Damasceno Nepomuceno

FLAMMA löst sich davon, einfach nur traditionelle, hochwertige Gitarreneffekte anzubieten, und ist stolz darauf, sein erstes Cab-Simulationspedal vorzustellen. Das FS07 Cab-Pedal verfügt über 11 integrierte Gehäusesimulationseffekte und unterstützt gleichzeitig endlose Anpassungsmöglichkeiten durch die Unterstützung von Impulsantwortdateien von Drittanbietern.

Da immer mehr Gitarristen die Welt des digitalen Modellierens erkunden, möchte Flamma den Benutzern benutzerfreundliche Hardware- und Softwarelösungen bieten, die ein frustfreies Erlebnis ermöglichen. Die Verwendung des FS07 ist mit einem Doppelfunktions-Fußschalter, der als herkömmlicher Ein-/Ausschalter oder als Möglichkeit zum einfachen Durchlaufen der sieben anpassbaren Preset-Slots verwendet werden kann, ein Kinderspiel. Jede Preset- und Cab-Sim-Datei kann mit den Pedalknöpfen nach Ihrem Geschmack angepasst werden oder mit der kostenlosen Editor-Software für noch präzisere Optimierungen. Wenn es Zeit zum Spielen ist, unterstützt der FS07 entweder Mono- oder Stereo-Eingänge und -Ausgänge, um das Signal einfach zwischen externen Lautsprechern, Soundboards, Mixern oder Audio-Interfaces aufzuteilen.

Breaking away from simply offering traditional high-quality guitar effects, FLAMMA is proud to introduce their first Cab Simulation pedal. The FS07 Cab pedal features 11 built-in cabinet simulation effects while also supporting endless customization by supporting third-party impulse response files.

As more guitarists explore the world of digital modelling, Flamma aims to provide users with easy-to-use hardware and software solutions that provide a frustration-free experience. Using the FS07 is a breeze with a dual-function footswitch that can be used as a traditional power toggle or as a way to easily cycle through the seven customizable preset slots. Each preset and cab sim file can be adjusted to your taste by using the pedal knobs, or by using the free editor software for even more precise tweaking. When it’s time to play, the FS07 supports either mono or stereo inputs and outputs to easily split the signal between external speakers, soundboards, mixers, or audio interfaces.

Flamma

Demo by Hey Worship Leader

FS07 Cab

Christian DG

Das M-Vave Mini Universe ist ein kompaktes, preisgünstiges digitales Reverb-Pedal, das eine Vielzahl von Möglichkeiten zur Gestaltung von Raumklang und Ambient-Sounds bietet. Es verfügt über 9 verschiedene Reverb-Modi, darunter Room, Hall, Plate, Spring, Shimmer, Cloud, Bloom, Swell und Lofi, mit denen Nutzer eine Vielzahl unterschiedlicher Hall-Effekte erzeugen können.

The M-Vave Mini Universe is a compact, budget-friendly digital reverb pedal that offers a wide range of ambient and spatial tone-shaping capabilities. It features 9 distinct reverb modes, including Room, Hall, Plate, Spring, Shimmer, Cloud, Bloom, Swell, and Lofi, allowing users to create a diverse array of reverberant effects.

M-VAVE

Demo by 60 Cycle Hum

Mini Universe

Polyphonic octave effect
Oct1, Oct2 and dry control
3 modes options: top, both and bottom

Tomsline Engineering

Demo by  KingSteven16

Demo by hovercraft Artifact

Review by Talk Bass.com

OCTOPUS Polyphonic Octaver

Francisco Ferreira

The first generation of D-SEED was well received, then JOYO gathered numerous feedbacks from customers and launched D-SEED II stereo delay, which bringing brand new algorithms, and provides 8 different delays. Various effects are listed as below: Space, LO-FI, Filter, Tape, Copy, Analog, Modulation and Reverse.

Moreover, there's a neat feature, D-SEED II has a toggle that allows you to add stereo PingPong effect to the delay, which means you can hear vivid spinning sound around.

Tap Tempo is one of its functions, you can set the time of the delay with only one foot.

D-SEED II also features LOOPER function, you can get 3.5 minutes recording time in total, buy this delay and you get a looper for free!

Demo by The ATX Gear Show

Demo by Ambient Endeavors

Review by Delicious Audio

Review by reddit.com/r/guitarpedals

Review by Gear News

Demo by Perry Frank

D-SEED II

Du suchst nach einem Overdrive, der NICHT “transparent” ist und deinem Sound seinen eigenen Stempel und Charakter aufdrückt? Dann ist der Moonshine Overdrive genau das richtige für dich – vorausgesetzt du magst seinen Charakter. Eine einzigartige Version des berühmtesten aller Overdrives (der im grünen Gehäuse), an der heftigst herumgebastelt wurde. Ob Blues, Rock, Country (und Western), Jazz, oder sogar Hardcore/Metal – für Gitarristen aller Art ist dies ein unverzichtbares Tool zum Formen eines Mid-Heavy Sounds. Wie der SuperBold, nutzt auch der Moonshine die interne 9-18V Konverterschaltung für mehr Headroom, Low-End und Punch. V2 kommt mit zusätzlichem Blend Regler um das trockene Signal zum Effekt stufenlos hinzuzumischen.

Are you looking for an overdrive that is not transparent and adds its own character and attitude? The Moonshine is for you - highly unique and massively tweaked version of the most famous overdrive ever created and housed in a little green enclosure. Blues, rock, country (and western), jazz, and even hardcore/metal players will find this is an indispensable tool for shaping and creating unique mid heavy tones for almost any need. Just like our SuperBolt pedal, the Moonshine uses an internal 9v to 18v charge pump for an enormous amount of headroom, added low-end and more overall punch. V2 comes with a Clean Blend control that lets you add your clean signal to the mix.

Official Product Page

Moonshine V2

RC Booster V2 by Xotic