Nicholas Howerton

Made for a friend who is actually building this board.

Face Melter 5000 (Don't ask questions :p)

Gilles Peynet

Feel the need to express yourself fully? M-Audio’s EX-P expression controller pedal works with all M-Audio MIDI controllers that have an expression pedal input. A built-in polarity switch insures compatibility with most other brands of controllers and keyboards. Use the EX-P to control any assignable variable MIDI controller value including volume, modulation, panning, filter sweep and more. Durable molded construction with integral cable.

M-Audio

Product Page

Demo by Rob L

Demo by Stamatis Stabos

Review by reddit /guitarpedals

EX-P

Tester

Der Name Orange steht für einen eigenen britischen Ampsound und natürlich ein unverwechselbares Design, das aufgrund der auffälligen, fruchtigen Farbe einen hohen Wiedererkennungswert hat. Effektpedale sind sicherlich nicht die Hauptdisziplin, mit der man die Marke in Verbindung bringt, doch das soll sich wohl ändern, denn 2015 hat Orange zum ersten Mal seit den 60er Jahren einen Schritt in den Bodentretermarkt gewagt.

The Amp Detonator from Orange is the ultimate tool for guitarists who want to use a guitar with two different amplifiers and/or effect chains. Two outputs, each with its own buffer amp, allow the guitar signal to be forwarded alternately or simultaneously, without the need for long cable runs. In addition, a specially developed isolating transformer and a switch for phase reversal ensure noiseless operation without loss of sound.

Orange

Review by Bonedo 

Manual

Demo by Guitar Interactive Magazine 

Demo by Orange Amps 

Review by Guitar Interactive Magazine 

Amp Detonator ABY

Tavish Stone

 Inherently simple devices like fuzz circuits are extremely sensitive to the amount of voltage that they receive, thus any change in the voltage from your power supply will cause drastically different tones. Guitarists eventually caught on to this hack and began draining their batteries to try and find the sweet spot for their fuzz pedal. A good idea in theory, but who has time for that? Then, just a few years ago, a certain unnamed guitarist reached out to me for a practical solution for this technique– and the Volture was born. 

JHS Volture Manual French

JHS Volture Manual Czech

JHS Volture Manual German 

JHS Volture Manual Polish

JHS Volture Manual Dutch

JHS Volture Manual Englisch

JHS Volture Product Page 

Review by Pedal PCB

Demo by Pedal Stacking

Demo by Tellurite Music Co.

Volture

QuickMount Type L

Pedal-Montageplatte für Standard-Mini-Pedale

Pedal Mounting Plate For Standard Mini Pedals

Mit der 200-Serie präsentiert BOSS eine neue, kompakte Pedal-Generation, die mit hochwertigem Sound, außergewöhnlicher Vielseitigkeit und minimalem Platzbedarf auf deinem Pedalboard überzeugt. Dank intuitiver Regler und multifunktionaler Schalter gestaltet sich die Bedienung einfach und intuitiv. Zusätzlichen Komfort bieten die internen Speicherplätze, über die du deine eigenen Setups bei Bedarf unmittelbar abrufen kannst. Die hohe Audioqualität der Pedale der 200-Serie basiert auf einer 32 Bit AD/DA-Wandlung, 32 Bit internen Signalverarbeitung und 96 kHz Samplingrate. Weiterhin kannst du die Pedale optional über externe Umschalter, ein Expression-Pedal oder via MIDI steuern.

With the 200 series, BOSS introduces a new generation of pedals that pack advanced sound and versatility into a streamlined size that saves space on your board. Grab-and-go controls and multi-function switches make operation easy and intuitive, while onboard memories allow you to store multiple setups for instant recall. All 200 series pedals feature premium audio quality with 32-bit internal processing and offer support for external control via footswitches, an expression pedal, or MIDI.

BOSS

Review by Joe Charupakorn, premierguitar.com

Review by Dimitri, amazona.de

Review by Michael Behm, bonedo.de

Demo by Rabea Massaad

Official Product Video

EQ-200 Graphic Equalizer

ch ray

With every AUTO Series pedal, your performance becomes an integral part of the sound effect!
Your touch, playing dynamics, and note choices shape the tones and textures, responding to your performance and evolving in real-time. Hence, the sound design is intricately woven into your musical expression, guiding you on a journey of continuous discovery and wonder.

Customize the adjustments with the DYNAMICS and PITCH knobs and dedicated mode switches. Adjust the DYNAMICS decay time, introduce glide to PITCH tracking, and tailor the response curves to match your playing style and the desired effect. Each of the primary effect knobs is paired with a corresponding smaller adjustment knob, also known as an attenuverter. This allows you to precisely dial in the variation amount and direction for each effect knob independently. Imagine the dynamic possibilities – a loud strum on a guitar can turn one knob clockwise significantly, while only slightly nudging another knob in the opposite direction. Explore the subtleties, from gentle parameter shifts to sweeping, full-parameter transformations.

Gamechanger Audio

Demo by Gear Sounds

Review by The Gear Page

Review by musicradar

Review by Sound on Sound

Review by AMAZONA

Auto Chorus

Gamechanger Audio’s AUTO Series M-Type pedals redefine classic audio effects with
cutting-edge parameter automation - carefully designed to become part of your performance.
Rather than overwhelming you with a variety of pre-made, quirky sounds, we provide you with
the essential toolset: three nuanced algorithms, four vital parameter controls, two exceptionally
precise dynamics & pitch tracker engines, and a set of patching accesories.
With these building blocks and the knowledge contained in this booklet - you will be able to
explore an endless array of sound possibilities. The combinations are virtually limitless, allowing
you to continuously breathe new life into the AUTO REVERB and create soundscapes that
naturally evolve with your playing, offering a unique musical experience every time.

Review by Guitar Bomb

Review by Gearnews

Auto Reverb

To shape the AUTOMATION, you can precisely calibrate both DYNAMICS and PITCH tracking engines – indicated by the led light strips in the patchbay. Furthermore, you can customize the automation with the DYNAMICS and PITCH knobs, along with dedicated switches featuring three distinct modes for both sides of automation. Thereby you tailor the response curves to suit your playing style and the desired automation effect.

The result – an unlimited breadth of touch-responsive effects – orchestrated in real time by the nuances of your playing. 

From subtle, tasteful settings, all the way up to wild experimentation – the AUTO Series is an endless platform for discovery.

Auto Delay

James  Thain

The ProD2 is a high-quality ultra-compact stereo passive direct box that features custom-made Radial transformers. Essentially two ProDIs in one compact enclosure the ProD2 is a great choice for stereo keyboards, DJ equipment and consumer hi-fi systems. Its high-performance transformer has an exceptionally linear frequency response from 20Hz to 18kHz and is able to handle high signal levels without saturation making it ideal for electronic instruments. The ProD2 is housed in an extremely rugged two piece 14 gauge steel enclosure with a book-end designed outer shell that prevents damage to the switches, features a -15dB PAD for high output sources and ground lift switch to troubleshoot noise from ground loops.

Radial Engineering

Demo by Adam Likes to Rock

Review by audiofanzine

Review by Gearspace

PRO D2

Gustavo Celis

Chroma Console is a flexible multi-effect pedal that takes inspiration from the eccentricity, grit, and lively instability of beloved vintage recording technology, combines it with brand new sounds, and delivers it all through an intuitive user interface that puts wide-ranging sonic experimentation at your fingertips.

Hologram Electronics

Quick Start Manual

Demo by Mark Johnston

Chroma Console

Lee Atkin

Microcosm ist ein granulares Effektpedal, das Ihren Sound auf neue und aufregende Weise neu arrangiert und interpretiert, indem es eine Vielzahl von Sampling-, Pitch-Shifting-, Delay- und Looping-Techniken einsetzt. Kaskadierende Mikro-Loops können in straffe, mit dem Tap-Tempo synchronisierte Rhythmen eingebunden, in eisige Ambient-Texturen aufgelöst, zu hypnotischen Drones verwoben werden und vieles mehr.

Microcosm is a granular effects pedal that rearranges and reinterprets your sound in new and exciting ways using a variety of sampling, pitch-shifting, delay, and looping techniques. Cascading micro-loops can be locked into tight, tap-tempo synced rhythms, diffused into glacial ambient textures, woven into hypnotic drones, and much more.

Review by Sound On Sound

Review by Magnetic Mag

Introduction by Hologram Electronics

Demo by David Hilowitz Music

Microcosm

rudy iskandar

Pedal Board Power Supply With 8 Isolated Outputs

GATOR

Review by GUITAR WORLD 

Demo by Guitar World 

Power 8

Für 10-20 FX-Pedale, 1 MOD-Slot - **622 x 424 mm / 24.49" x 16.69"** - erhältlich mit Gig Bag oder Flight Case

For 10 - 20 FX pedals, 1 MOD slot - **622 x 424 mm / 24.49" x 16.69"** - available with Gig Bag or Flight Case

NIck Costa

My pedal board for solo gigs, designed for my dual output Gibson J160.

4 Signal paths: Acoustic, Electric, Beat Buddy, Vocals. 

The guitar signal chain goes through the FX loop in the DI to share some FX on both guitars (delay, reverb, octaver) and allows me to capture both in loop. It also runs through the harmony pedal to guide the key on vocal harmonies. The DI sends one blended output to mixer.

Beat Buddy syncs to Loop pedal via MIDI.

Board has a white LED strip underneath.

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 3 V2 ist eine Patchbay für Sänger und Akustik-Musiker. Über die zwei XLR-Ausgänge kannst du ein Stereo-Signal von dein MOD senden und an den XLR-Eingang lässt sich ein Mikrofon anschließen. Mit drei TRS-Through-Verbindungen lässt sich das MOD 3 V2 außerdem als zentraler Zugang und Ausgang des Boards nutzen um zum Beispiel Effektpedale in den FX-Loop eines Verstärkers einzuschleifen.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 3 x 6,3 mm TRS thru
- 2 x XLR thru (männlich vorne / weiblich hinten)
- 1 x XLR thru (weiblich vorne / männlich hinten)
- 1 x DC 2,1 x 5,5 mm Hohlstecker thru
- 1 x AC IEC thru (männlich vorne / weiblich hinten)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel


The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 3 V2 is a pass-thru box designed for use by vocalists and acoustic players. The 2x XLR outputs allow you to send a stereo signal from your MOD and the 1x XLR input can be used to connect your microphone. You can also use it to run several pedals from your board through the effects loop of your amp, or simply use the MOD as a central access point to your pedalboard.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 3 x 6,3 mm / ¼" TRS thru
- 2 x XLR thru (male front / female back)
- 1 x XLR thru (female front / male back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR Patchbay for Vocalists & Acoustic Players

Looping Board - All in One

Pavle Ivanovic

Behringer

Behringer Xenyx 1002SFX

David Litaba

The Volume (X) Pedal controls volume and FX parameters, featuring fully adjustable rocker tension and and a Low Friction Band-Drive for ultimate durability—all in a pedalboard-friendly housing.

Dunlop

Demo by W-Distribution

Review by Jim Dunlop 

Review by VAR GUITAR

VOLUME (X) PEDAL DVP3

QuickMount Type M

Pedal-Montageplatte für Dunlop Cry Baby Wah-Pedale

Pedal Mounting Plates For Dunlop Cry Baby Wah Pedals

Bart Gijde

FS-7 ist ein kompakter Doppelfußschalter zur Fernsteuerung von Effektpedalen oder zur Kanalumschaltung von Verstärkern. Zwei Fußschalter sind hintereinander angeordnet, was Platz auf Effektpedalbrettern spart. Zwei wählbare Modi für Latch oder Momentary ermöglichen die Steuerung einer breiten Palette von Geräten.

FS-7 is a compact dual footswitch for remote control of effect pedals or amp channel switching. Two footswitches are arranged in tandem, which saves space on effects pedal boards. Two selectable modes for latch or momentary allow for control of a wide range of equipment.

FS-7

Simplifier features a 100% true analog preamp that recreates with obsessive detail the most useful and popular clean channel preamps in the market AC BRIT: Classic AC30 sparkly and tridimensional sound. A true British heritage since the 60's. AMERICAN: Classic blackface deluxe sound. Sweet and dynamic with a balanced response. By far the most used amp on studio recordings MS BRIT: Classic clean-to-crunch vintage plexi style amp. The sound that defined rock music.

DSM & Humboldt

Demo by Worship Tutorials

Review by bonedo

Review by Gitarre & Bass

Demo by Brett Kingman

Simplifier Classic

Carrying on the POLYTUNE legacy, POLYTUNE 3 MINI packs an unprecedented amount of tuning power into a tiny footprint without sacrificing essential features, such as always-on mode and our audiophile BONAFIDE BUFFER circuit for uncompromised tones – making it ideal for fully-loaded pedal boards where every inch counts!

TC Electronic

Review by AMAZONA 

Review by GUITAR World 

Review by bonedo 

Demo by TC Electronic 

Polytune 3 Mini

Simon Katz

The Red-Eye Twin Instrument Preamp offers a simple, one-box, direct-connect solution for
musicians that play two instruments at the same gig or have an instrument with dual pickups. The
Red-Eye Twin works well with instruments having passive or active piezo pickups, electret
microphones or magnetic pickups such as electric guitars and basses. Performers that find the
Red-Eye Twin useful are, for example, those playing fiddle and mandolin, guitar and mandolin,
string bass and electric bass or dual pickup instruments

Fire Eye

Review by Fretboard Journal

Demo by Bass Whisperer TV

Review by acoustic guitar forum

Red Eye Twin

Cory Gage

Der K&K Sound Pure Preamp ist ein kompakter externer Vorverstärker, der entwickelt wurde, um das Signal von Akustikgitarren-Pickups und anderen passiven Tonabnehmern zu verbessern. Er bietet eine rauscharme Schaltung mit einer dreibändigen Klangregelung (Bass, Mitten und Höhen) sowie ein internes Gain-Trimmpoti zur Anpassung der Verstärkung. Der spezielle Breitband-Mittenfilter und die hohe Eingangsimpedanz sorgen für eine natürliche, breitbandige Wiedergabe von 10 Hz bis 30 kHz, was ihn besonders effektiv mit Piezo-Pickups macht. Der Pure Preamp wird mit einer 9-V-Batterie betrieben und bietet mit seiner robusten Belt-Clip-Bauform klare, kraftvolle Klänge und einfache Klangformung.

The K&K Sound Pure Preamp is a compact external preamplifier designed to enhance the signal from acoustic guitar pickups and other passive transducers. It features a clean, low-noise circuit with three-band EQ controls (bass, mid, and treble) and an internal gain trim that lets you adjust the amplification from subtle to stronger boosts. Its wide-band midrange filter and high input impedance provide a natural, full-range response from 10 Hz to 30 kHz, making it especially effective with piezo pickups. Powered by a 9 V battery with long life and housed in a rugged belt-clip case, it delivers clarity, power, and simple tonal shaping in a small form factor.

K&K Sound

Demo by Fabian Holland

Demo by Hiroya Tsukamoto

Pure Preamp

Antony Douch

Entdecke den RC-600 – den modernsten Looper der Welt. Mit ihrer erweiterten Bedienung und zahlreichen anpassbaren Funktionen führt die wegweisende Loop Station im Bodentreter-Format Gitarristen, Singer-Songwriter, Multiinstrumentalisten und andere Looping-Musiker in eine neue Ära kreativer Leistungsfähigkeit. Halte mehrere Mikrofone und Instrumente in hochwertigem Sound in 32-Bit auf sechs Stereo-Tracks fest und behalte jederzeit die Kontrolle. Hierfür sorgen neun frei zuweisbare Fußtaster sowie die umfangreichen externen Steuerungsoptionen. Und das ist erst der Anfang. Bearbeite den Sound deiner Loops mit der riesigen Effektauswahl, erhöhe den Groove mit den integrierten Rhythmen, route Audiosignale nach Belieben auf die drei Stereoausgänge, integriere deine DAW über USB und vieles mehr.

Meet the RC-600, the most advanced looper on the planet. Loaded with evolved features and customizable functions, this next-generation Loop Station ushers in a new era of creative power for guitarists, singer/songwriters, multi-instrumentalists, and other looping musicians. Capture multiple mics and instruments with six stereo tracks and premium 32-bit sound, and take full command with nine freely assignable footswitches and deep external control support. And that’s just the start—you can also color loops with a massive FX selection, groove with onboard rhythms, route audio as you like to the three stereo outputs, integrate with computer software via USB, and much more.

Demo by SoundCrunch

Review by Richard Purvis, guitar.com

Review by Loopstation

RC-600

Cameron Taylor

The CopperSound Passive ABY pedal is a simple and handy utility device designed to split one input into two separate outputs, or combine two separate inputs into one output. Being a Bi-directional Passive device, its applications are only limited by your imagination! Use it to run and organize your stereo rig, switch between two instruments on the fly, or even as a mute switch for silent instrument changes. To make connections simple, the footswitch washers are color-coordinated to their corresponding output jack. Since this ABY is a passive device, power is only required for the status LEDs.

Coppersound

Passive ABY Switcher

Vocal Effects Stompbox with Guitar-Controlled Harmony, Reverb and Tone

TC Helicon

Review by Guitar Fella

Demo by Andertons Music

Harmony Singer

Fusing classic BOSS octave tones with the latest tracking technologies, the BOSS OC-5 sets a new standard in octave pedal performance. Vintage mode provides a spot-on recreation of the legendary mono OC-2 from 1982, while Poly mode offers numerous enhancements for extended-range playing. And with the addition of an octave-up feature, a span of three octaves is now available for creative exploration. From fat, low mono sounds to octave-shifted chords and more, the OC-5 delivers the widest range, finest sound quality, and best playability in any octave stomp to date.

Review by Six String Sensei

Review by Guitar World

Demo by  Pepe Music

OC-5

PedalSafe Type E1

QuickMount Type E

Pedal-Montageplatte für Standard-Boss-Pedale

Pedal Mounting Plate For Standard Boss Pedals

Schutzabdeckung & RockBoard-Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & RockBoard Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Schutzabdeckung & universelle Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & Universal Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Bring professional drums to your pedalboard. Built like a guitar pedal
stompbox, the BeatBuddy delivers authentic, studio-quality drum beats
wherever you play. Experiment with 220+ styles and 24 genres to find
your perfect match. Customize your performance with fills, transitions,
intros and outros by simply tapping your foot.

BeatBuddy’s dynamic, award-winning samples play in 24-bit studio-grade sound with
32-bit floating point processing. Utilize near-endless memory to add up
to 3 million songs using an SD card. Included BeatBuddy Manager software
lets you create and edit custom beats, create set lists and more.

Singular Sound

Review by Guitar Interactive Mag

Demo by  60 Cycle Hum

Demo by  Zach Wirchak

Demo by Karl Golden Music

Beat Buddy

Session circuitry enhances your acoustic pickup and imparts the rich sonic character that you’d expect from an experienced audio engineer using some of the world’s finest studio gear.
Unlike standard compression that can squash the entire range of your signal, the Session’s Comp EQ features 3 narrowly focused bands of compression that tame common problematic frequencies and uncover the voice of your guitar. The low, mid, and high frequency compressors are essentially “touch-sensitive” EQs that respond in real-time to your dynamics. The harder you strum, the more they compress and vice versa.

LR Baggs

Review by Guitar IQ

Demo by Guitar IQ

Demo by Clever Little Rodents

Align Series Session

Strymon

Ojai r30

Zuma r300

Tim Atfield

Der RockBoard Pedalboard Drawer ist eine simple aber extrem effiziente Lösung zum Organisieren und Verstauen von optionalem Zubehör in einem RockBoard Pedalboard. Der Pedalboard Drawer wurde entwickelt, um Zubehör wie Kabel, Plektren, Wireless Systeme und vieles mehr im MOD Slot des Pedalboards aufzubewahren. Durch den zentralen Zugang auf der Front des Pedalboards bietet der Drawer einen sichereren, sauberen und einfach zugänglichen Platz zur Aufbewahrung direkt am Setup. Durch die intelligente Arretierung der rotierenden Schublade ist eine zusätzliche Sicherung nicht notwendig.

- rotierende Schublade für RockBoard Pedalboards
- intelligenter Drehmechanismus mit sicherer Arretierung
- für Zubehör, Kabel, Wireless Systeme, Plektren, etc.
- passt in die MOD-Slot Aussparung von RockBoard Pedalboards (außer RockBoard DUO 2.0, 2.1, und 2.2)
- Material: Verstärktes Polyamid
- inkl. Montagematerial und Werkzeug
- Maße (B x T x H): 175 x 84,5 x 47 mm
- Gewicht: 150 g
- schwarz
- Hinweis: Nicht kompatibel mit den 19" Rack Panel Single oder Double (1U) - Rack Mount for RockBoard MOD

The RockBoard Pedalboard Drawer is a simple but super effective solution to organize and store optional accessories in your RockBoard pedalboard. The Pedalboard Drawer is designed to store accessories such as cables, picks, wireless systems and more directly in the MOD slot of the pedalboard. With access on the front of the pedalboard, the Drawer provides a safer, cleaner, and convenient place for storage. The Drawer opens and closes using an intelligent swivel locking mechanism.

- rotating mounting drawer for RockBoard pedalboards
- intelligent swivel locking mechanism
- for accessories, cables, wireless systems, etc.
- fits MOD slots in RockBoard pedalboards (except RockBoard DUO 2.0, 2.1, 2.2, and 2.3)
- material: reinforced polyamide
- incl. all mounting screws, counter nuts, and tools
- dimensions (W x D x H): 175 x 84.5 x 47 mm / 6 57/64" x 3 21/64" x 1 27/32"
- weight: 150 g / 0.33 lbs
- black
- Note: Not compatible with 19" Rack Panel Single or Double (1U) - Rack Mount for RockBoard MOD

Rotierende Schublade für RockBoard Pedalboards

Rotating Drawer for RockBoard Pedalboards

Das Power MOD ISO DC 1 ist ein Multi-Netzteil für Effektpedale und bietet bis zu 9 galvanisch getrennte, aufwändig gefilterte 9 VDC Stromanschlüsse und einen 5 V USB Anschluss.

Das Multi-Netzteil ist so konzipiert, dass es bis zu 9 Effektpedale gleichzeitig, und ohne Nebengeräusche zu erzeugen, mit Strom versorgt. Eine ausgeklügelte Filtertechnologie eliminiert effektiv hochfrequente Einstreuungen.

Ein separater Kurzschlussschutz für jeden Ausgang schützt die angeschlossenen Effektpedale vor Schäden im Falle eines Kurzschlusses. Unabhängig voneinander arbeitenden LED signalisieren den ordnungsgemäßen Zustand der Verbindung an jedem Ausgang. Bei einem Kurzschluss wird nur der betroffene Ausgang abgeschaltet, der Rest der Effektpedale bleibt betriebsbereit.

- Multi-Netzteil für Effektpedale
- bietet galvanisch isolierte und aufwändig gefilterte Stromausgänge
- passt in einen MOD Steckplatz and RockBoard® Pedalboards
- kompatibel mit vielen anderen Pedalboards
- abnehmbare Frontplatte für die Befestigung auf oder unter einem Pedalboard
- aufwändige Filtertechnologie verhindert Hochfrequenzeinstreuungen
- externes Netzteil verhindert Niederfrequenzeinstreuungen
- Verpolschutz am Eingang
- individuelle LED Anzeigen und Kurschlussschutz für alle Stromausgänge
- 2 x Zugentlastungen für angeschlossene Kabel
- Eingang: 24 VDC / 1,5 A
- Ausgänge: 8 x 9 VDC, je 300 mA / 1 x 9 VDC, 500 mA / 1 x 5 VDC USB-C, 2000 mA
- inkl. 1 x 24 VDC Netzteil (1,5 mA) mit austauschbaren multiregionalen Steckeradaptern
- (EU, UK, US/CA, AU/NZ), Eingangsspannungsbereich 100-240V AC
- inkl. 9 x RockBoard® Flat Power Cable, 60 cm (zum Anschluss der Effektpedale)
- Abmessungen (L x B x H): 175 x 85 x 47 mm (mit Frontplatte) / 160 x 85 x 33 mm (ohne Frontplatte)
- Gewicht: 500 g

The Power MOD ISO DC 1 is a multi-power supply for eﬀect pedals and provides up to 9 electrically isolated, highly filtered 9 VDC power connections and one 5V USB connection.

It fits in a MOD slot on ROCKBOARD pedalboards, but, due to its removable front plate, it can also be used as a power supply for other pedalboards. The multi-power supply is designed to provide noiseless power to up to 9 eﬀects pedals simultaneously. Sophisticated filtering technology eﬀectively eliminates high-frequency noise. Separate short-circuit protection for each power slot protects the connected eﬀects pedals from damage in the event of a short circuit.

Separate LED indicate healthy connections for individual each slot. Should a short circuit occur, only the aﬀected power slot is switched oﬀ, leaving the rest of the eﬀects rig operational.

- multi-power supply for eﬀects pedals
- provides transformer isolated and highly filtered power slots
- fits in a MOD slot on RockBoard® pedalboards
- compatible with most other pedalboards
- detachable front plate for mounting on top or underneath pedalboards
- advanced filter technology prevents high frequency noise
- external mains transformer prevents low frequency interference
- input polarity protection
- individual status LEDs and short circuit protection for all power slots
- 2 x strain relief clamps for connected cables
- input power: 24 VDC / 1.5 A
- outputs: 8 x 9 VDC, 300 mA each / 1 x 9 VDC output, 500 mA / 1 x 5 VDC USB-C, 2000 mA
- incl. 1 x 24 VDC power adapter (1.5 mA) with exchangeable multi-regional plug adapters
- (EU, UK, US/CA, AU/NZ), input voltage 100-240V AC
- incl. 9 x RockBoard® Flat Power Cable, 60 cm (for connecting eﬀects pedals)
- dimensions (L x W x H): 175 x 85 x 47 mm / 6.9" x 3.34" x 1.85" (with front plate) / 160 x 85 x 33 mm / 6.3" x 3.34" x 1.3" (without front plate)
- weight: 500 g / 1.1 lbs

Multi-Netzteil für Effektpedale

Multi-Power Supply for effects pedals

Das RockBoard MOD 4 - All-in-One Wireless System Receiver + Patchbay für Pedalboards bietet eine einfach zu realisierende, kabellose Verbindung zwischen deinem Instrument und deinem Pedalboard. Dabei nutzt es eine digitale Wireless Technologie, die eine beeindruckende Klangqualität, ein einfaches Setup und eine zuverlässige Nutzung für aktive Musiker garantiert. Das Wireless System arbeitet im 2,4 GHz ISM Band und kann so weltweit ohne Beschränkungen genutzt werden. Mit einem nutzbaren Frequenzbereich von 20 Hz - 20 kHz und nur 5 ms Latenz bleiben keine Wünsche offen. Die Patchbay-Sektion wurde entwickelt um Verbindungen und Anschlüsse des Pedalboards von der Unterseite nach außen zu führen, dir einen zentralen Zugangspunkt zu deinem Setup zur Verfügung zu stellen und um deine Kabelwege aufzuräumen und sortieren zu können. Die A, B, C und D TRS Buchsen sind als direkte, durchgängige Verbindungen von der Vorderseite des MOD 4 zu den entsprechenden Buchsen auf der Rückseite verkabelt. Damit kannst du deine Effekt-Kette so einrichten, dass du bei der Vorbereitung auf den Gig lediglich Kabel an der Vorderseite des Boards einstecken musst, anstatt unter dem Board zu hantieren.
- Wireless System Receiver + Patchbay für Pedalboards, inkl. Wireless Transmitter
- 2,4 GHz ISM Band für weltweite Nutzung
- 30 m durchschnittliche Reichweite (ohne Hindernisse)
- 24 bit / 48 kHz unkomprimierte digitale Signalübertragung
- 20 Hz - 20 kHz Frequenzbereich
- 5 ms Latenz
- 103 dB Dynamikbereich
- 85 dBm HF-Empfindlichkeit
- 0.2% Verzerrung (THD)
- 4 wählbare Kanäle
- passend für MOD Slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe anderer Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 4x 6,3 mm Stereo-Klinke Thru (TRS)
- 1x 6,3 mm Mono-Klinke Receiver Audio Ausgang (TS)
- 1x DC 2,1 x 5,5 mm Hohlstecker Thru
- 1x AC IEC Thru
- 1x USB Type A Charge Ausgang
- Stromversorgung via optionalem 9V DC Netzteil, 2.1 x 5.5 mm Hohlstecker, Polarität (-) innen
- Batteriebetrieb nicht unterstützt
- Stromaufnahme 500 mA
- passiver Betrieb möglich (nur Patchbay, ohne Wireless System)
- Abmessungen mit Frontplatte (B x T x H): 175 x 85 x 47 mm
- Abmessungen ohne Frontplatte (B x T x H): 160 x 85 x 33 mm
- Gewicht 500 g
- Wireless Transmitter, zwei Antennen, ein USB Kabel, Montageschrauben und Muttern im Lieferumfang enthalten

The RockBoard MOD 4 - All-in-One Wireless System Receiver + Patchbay for Pedalboards offers an easy-to-use wireless connection between your instrument and your pedalboard, featuring digital wireless technology that delivers incredible audio quality, a simple setup procedure, and reliable use for any gigging musician. The wireless system works in the 2.4 GHz ISM band for unlimited worldwide use and offers a full 20 Hz - 20 kHz frequency range with only 5 ms of latency. The patchbay module is designed to route connections from underneath your pedalboard to its front, giving you a central access point and tidying up your connections. The A, B, C, and D TRS sockets are wiring thru-connections from the front of MOD 4 to the corresponding sockets on the back. This allows you to connect your pedals permanently underneath the board, so you only have to connect cables to and from the front of the board, instead of having to route underneath it when setting it up for a gig.
- wireless system receiver + patchbay for pedalboards, incl. wireless transmitter
- compatible with guitar wireless system
- 2.4 GHz ISM band for worldwide use
- 30 m / 100 ft. approx. range (without obstacles)
- 24-bit / 48 kHz uncompressed digital transmission
- 20 Hz - 20 kHz frequency range
- 5 ms latency
- 103 dB dynamic range
- 85 dBm RF sensitivity
- 0.2% total harmonic distortion
- 4 selectable channels
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- detachable front plate for mounting on top or underneath pedalboards
- 4x 6.3 mm / 1/4" stereo thru (TRS)
- 1x 6.3 mm / 1/4" mono receiver audio output (TS)
- 1x DC 2.1 x 5.5 mm barrel thru
- 1x AC IEC thru
- 1x USB Type A charge output
- power supply via optional 9V DC power adapter, 2.1 x 5.5 mm barrel plug, polarity (-) center
- battery operation not supported
- current draw 500 mA
- passive operation possible (patchbay only, without wireless system)
- dimensions with front plate (W x D x H) 175 x 85 x 47 mm / 6 57/64" x 3 11/32" x 1 27/32" 
- dimensions without front plate (W x D x H) 160 x 85 x 33 mm / 6 19/64" x 3 11/32" x 1 19/64"
- weight 500 g / 1.1 lbs
- incl. wireless transmitter, two antennas, USB charging cable, mounting screws, and counter nuts

2.4 GHz Guitar Wireless Receiver, Transmitter + TRS Patchbay

New Pedal Board

Jeff Wingo

Das SONICAKE Expression Pedal Vexpress ist ein passives Lautstärke-/Expressionspedal für alle, denen ein Expression-Pedal in voller Größe zu schwer ist und einfach zu viel Platz auf dem Pedalboard einnimmt.

Wenn du das Pedal als Expression-Pedal verwenden willst, lass die Eingangsbuchse offen und verbinde die Ausgangsbuchse mit einem 1/4"-Stereokabel mit dem Gerät.

SONICAKE Expression Pedal Vexpress is a passive volume/expression pedal for those people who think that a full-size, expression pedal may be a little heavy, and simply took too much space on the pedal board.

Used as an expression pedal, leave the input jack unconnected, and connect the output jack to the device with a stereo 1/4" cable.

Vexpress

Learn more about Radial Engineering PRO D2 di pedal on PedalPedia - the most comprehensive online resource for effect pedals ▶️ Official specs, manuals, product videos and more