RockBoard

Signature Board of our artist Pablo Scarpa from Italy.
Make sure to check out his Instagram-channel: 
https://www.instagram.com/that_pablo_show/

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 1 V2 ist eine Pass-Through-Box, die speziell für Gitarristen und Bassisten entwickelt wurde. Du kannst das MOD 1 V2 nutzen um mehrere Pedale deines Setups im Front End und im Effekt-Loop des Verstärkers zu postieren (4-Kabel Methode) oder die vier TRS-Anschlüsse als zentralen Zugang und Ausgang des Boards nutzen. Die XLR-Through-Verbindung kann als Signalausgang vom Pedalboard zum Mischpult oder zur PA verwendet werden.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 5 x 6,3 mm TRS thru
- 1 x XLR thru (männlich vorne / weiblich hinten)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 5 x 6,3 mm / ¼" TRS thru
- 1 x XLR thru (male front / female back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR, IEC & Barrel Patchbay

That Pablo Show

Roland Schmidt

Die RockBoard QuickMount Pick Box ist ein hilfreiches Zubehör für Musiker, die alles an einem Ort aufbewahren möchten. Nie wieder verlorene Plektren oder verschwundenes Zubehör! Dank des QuickMount-Systems benötigst du kein klebriges Velcro mehr, die Pick Box lässt sich fest und sicher in das RockBoard Slot Grid klemmen.

The RockBoard QuickMount PickBox is a useful accessory for musicians who want to keep everything in one place. No more lost picks or missing accessories! Thanks to the QuickMount system, you no longer need sticky hook & loop tape. The PickBox snaps securely into the RockBoard slot grid.

RockBoard PickBox

PickBox

Tester

When it was introduced in 2010, the original POLYTUNE forever revolutionized the way musicians tune their instruments. Praised by professional and amateur players, guitar tuning instantly became as simple as Strum - Tune - Rock! So how do you make the best-selling polyphonic tuner even better? You take it to the next level by: providing multiple tuning modes, including polyphonic, chromatic, strobe and a variety of altered tunings; adding an onboard BONAFIDE BUFFER to preserve your tone over long cable runs and pedal board signal paths; and upgrading the LED display for even higher tuning accuracy. Say hello to your next tuner – POLYTUNE 3.

TC Electronic

Product Page

Review by Charleston Classical Guitar

Review by musicradar

Manual

Demo by American Musical Supply

Demo by Addicted to Gear

Demo by realbeal

Polytune 3

PedalSafe Type G

QuickMount Type G 

Pedal-Montageplatte für Standard TC Electronic Pedale

Pedal Mounting Plate For Standard TC Electronic Pedals

Schutzabdeckung & RockBoard Montageplatte für Standard TC Electronic Pedale

Protective Cover & RockBoard Mounting Plate For Standard TC Electronic Pedals

Schutzabdeckung & universelle Montageplatte für Standard TC Electronic Pedale

Protective Cover & Universal Mounting Plate For Standard TC Electronic Pedals

Das Electric Vibe ist ein analoges Phaser/Vibrato-Pedal, das die klassischen Vibe-Sounds mit zusätzlichen einzigartigen Funktionen kombiniert.

Elektronisch ist es von der Univibe (TM) Schaltung inspiriert und verfügt über ein ähnliches optisches System zur Modulation des Signals durch vier Phasenverschiebungsstufen.

Die ENVELOPE ist wahrscheinlich das, was ihn am meisten auszeichnet. Wenn die Hüllkurvenfunktionen aktiviert sind, kannst du eine dynamische, reaktionsschnelle Modulation erhalten, die der Intensität des Saitenzupfens und Akkordschlagens genau folgt. Was bedeutet das eigentlich? Wenn zum Beispiel die SPEED- und/oder DEPTH-Hüllkurve aktiviert ist, kann die Modulationsrate/Amplitude entsprechend der rhythmischen Akzente variieren, was subtile oder dramatische Veränderungen des Effekts ermöglicht. Es ist wirklich so, als ob du den Effekt „spielen“ würdest!

The Electric Vibe is an analog phaser/vibrato pedal which combines the classic vibe tones with additional unique features.

Electronically it’s inspired by the Univibe (TM) circuit and features a similar optical system to modulate the signal by going through four phase shifting stages.

The ENVELOPE is probably what makes it stand out the most. When envelope functions are engaged you can get dynamic responsive modulation which accurately follows string picking and chord strumming intensity. What does it mean after all? For example with SPEED and/or DEPTH envelope engaged the modulation rate/amplitude can vary according to rhythmic accents, allowing for either subtle or dramatic changes in the effect output. It’s really like you are “playing” the effect!

OPFXS

Demo by Pair of Pandas

Demo by The Guitar Effect

Official Product Video

Demo by JayLeonardJ

Review by Premier Guitar

Electric Vibe

Das Dispatch Master V3 ist ein Delay und Reverb Pedal, desen Effekte unabhängig oder gleichzeitig verwendet werden können. Es hat eine Verzögerungszeit von 1,5 Sekunden und einen dynamischen Nachhall, der von natürlich, geräumig bis tief und höhlenhaft geht. Es verfügt über Regler für Time, Repeats, Reverb und Mix und ist True Bypass. Die Version 3 ist mit der neuen Flexi-Switch™ -Technologie ausgestattet, die den Fußschalter sowohl als Momentary- als auch Latching-Schalter nutzbar macht und basiert auf einer geräuschlosen, relais-basierter Soft-Touch-Schaltung! Der Flexi Switch Momentary Modus wird aktiviert, indem du den Fußschalter so lange gedrückt hältst, wie du den Effekt verwenden willst. Lasse ihn los und dein Signal ist wieder dry. Um das Dispatch Master als normales Pedal zu verwenden, drücke den Schalter einfach einmal, um es zu aktivieren, und erneut, um es in Bypass zu schalten. Das Dispatch Master V3 wird in Ohio, USA handgefertigt.

The Dispatch Master V3 is a delay and reverb pedal, whose effects can be used independently or simultaneously. It has 1.5 seconds of delay time and a dynamic reverb that goes from natural and roomy to cavernous and deep. It features controls for Time, Repeats, Reverb and Mix and it's true bypass. The V3 version features the new Flexi-Switch™ Technology, which allows you to simultaneously use momentary and latching-style switching. It's based on the silent relay-based soft touch switching! It works by pressing and holding the footswitch for as long as the effect it's been used, releasing it, and resuming for dry sound. To use the Dispatch Master as a normal effects pedal, press the switch once to activate and again to bypass. The Dispatch Master V3 is hand made in Ohio, USA.

EarthQuaker Devices

Official Product Page

EarthQuaker Devices Dispatch Master Delay & Reverb Demo - EarthQuakerDevices

Dispatch Master Digital Delay and Reverb Video Manual - EarthQuaker Devices

EarthQuaker Devices & Juan Alderete Present: Dispatch Master on Bass - EarthQuakerDevices

EarthQuaker Devices Dispatch Master V3 - Demo Video - Musiker TV

Dispatch Master V3 - Digital Delay / Reverb

QuickMount Type B

Pedal-Montageplatte für Standard-Einzelpedale

Pedal Mounting Plate For Standard Single Pedals

Beetronics

Octahive

THE ZZOMBEE “FILTREMULATOR” IS A ONE OF A KIND ANALOG MULTI EFFECT THAT DELIVERS FILTER, WAH, LFO, RANDOMIZED FILTER, TREMOLO, SWELLS, OVERDRIVE, FUZZ, LOW-OCTAVE AND THE NEVER BEEFORE HEARD HONEY PATENTED CROSS TREMOLO, A VERY UNIQUE KIND OF TREMOLO THAT PULSES BETWEEN THE FUNDAMENTAL AND A LOW OCTAVE.

ITS UNBEELIAVABLE ANALOG TONES ARE ENHANCED BY AN INNOVATIVE WAY OF RAMPING AND CONTROLLING MODULATION MOVEMENTS THAT USES A MOMENTARY FOOTSWITCH IN THE MOST MUSICAL WAYS. THESE CONTROLS MAKE THE PEDAL AN EXTENSION OF YOUR INSTRUMENT, BEECOMING AN ESSENTIAL TOOL TO EXPAND YOUR CREATIVITY.

THE SOUNDS FOUND IN THE ZZOMBEE ARE VERY UNIQUE AND WOULD REQUIRE A VERY COMPLEX RIG TO BE RECREATED. THATS BECAUSE THE INSTRUMENT SIGNAL GETS A 4 STAGE GAIN BUZZ SELECTION AND RUNS IN PARALLEL TO A MONOPHONIC LOW OCTAVE BEEAST, IN THE MOST BEETRONICAL STYLE. THE FILTER CAN BE APPLIED TO EITHER OF THESE WITH THE OTHER REMAINING UNTOUCHED.

THREE MODES OF MODULATED FILTER CAN CREATE WAH-LIKE EFFECTS (THAT WILL MAKE YOU WANNA DITCH YOUR OLD BULKY WAH PEDAL), HONEY WAVES OF LFO OR OVER FIFTY THOUSAND VERY MUSICAL RANDOM PATTERNS. THREE MODES OF MODULATED AMPLITUDE CAN CREATE THE CROSS-TREMOLO, TRADITIONAL TREMOLO OR VOLUME SWELLS.

TO TOP IT OFF, THIS ANALOG BEE IS DIGITALLY PARASITIZED AND INCLUDES TAP-TEMPO FUNCTION, CV CONTROL, EXTERNAL TAP, EXPRESSION OUT AND CAN SAVE PRESETS.

Video Manual

Demo by Beetronics

ZZOMBEE FILTREMULATOR

The Phase 99 combines two Phase 90 circuits in a single housing with Modern/Vintage, Series/Parallel, and Sync switches for ultimate phaser experimentation.

 

This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).

Product Page 

Product Manual 

Product Demo 

Phase 99

The Centura is a true overdrive pedal, enhancing the tone and capability of your amp. Highly acclaimed one-one recreation of the Klon Centaur circuit.

Ceriatone

Review by Pedal of the Day

Manual Page 3

Manual Page 2

Manual Page 1

Demo by TheKlonWars

Demo by Andrew Cheng

Centura overdrive raw/clear coat version

Dan here, Mick here – hello!

We have a deep love for the harmonic tremolo’s unique modulation character: a little bit phase-y and a little bit pulsing. It can add a complete, enveloping texture over your whole guitar tone, or sit more subtly as a fantastic ‘widening’ effect either straight mono or in a wet/dry rig.

We wanted to address some of the issues we found in our other favourite examples of the effect and add a superb amplitude trem to boot; enter the Harmonious Monk, a collaboration between JAM pedals and That Pedal Show!

The Harmonious Monk uses all-analogue circuitry with two selectable LFOs providing varying levels of modulation intensity, available in both Harmonic and Amplitude modes: essentially four core sounds. We have included both depth and mix controls, so you can get it sat just right in your overall tone.

Subtle (-) setting in Amplitude mode offers a plethora of vintage-inspired tremolo tones with all the same adjustability as Harmonic mode. Intense (+) setting brings the chop! Stuttering, staccato pulses that add drama and rhythm to your music right up to a fast warble that can sound truly otherwordly.

We also added a footswitch so you can access two tremolo speeds instantly in any mode; internal trimmers to shape the EQ to your liking, and the ability to either boost or cut the overall output level to suit your rig and other pedals.

The Harmonious Monk covers a huge amount of sonic ground and it will inspire you towards a whole new palette of sounds, textures and music.

We summoned the Harmonious Monk from the waves of JAM pedals' sonic ocean so that we can all bathe blissfully in its glorious undulating tones. Let there be wobble!

Jam Pedals

Review by bonedo

Demo by Living Room GD

Harmonious Monk mk.1

PedalSafe Type B3

QuickMount Type B1

Pedal-Montageplatte für FRIEDMAN, KEELEY Halo, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD, Jupiter V2 Pedale, Mooer GL 100

Pedal Mounting Plate for FRIEDMAN, KEELEY Halo, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD, Jupiter V2 pedals, Mooer GL 100

Schutzabdeckung & RockBoard-Montageplatte für WALRUS MAKKO D1 Pedale

Protective Cover & RockBoard Mounting Plate For WALRUS MAKKO D1 pedals

Schutzabdeckung & universelle Montageplatte für WALRUS MAKKO D1 Pedale

Protective Cover & Universal Mounting Plate For WALRUS MAKKO D1 pedals

Mit einem sorgfältig abgestimmten, zusätzlichen Mittenfrequenzregister liefert der Tubedreamer einen warmen und satten Overdrive-Sound über jeden Verstärker.

Ein entscheidender Unterschied zwischen dem Tubedreamer und anderen Tubescreamern ist unsere Entscheidung für 3 Dioden für asymmetrisches Clipping anstelle von symmetrischem, wodurch die Reaktion des Pedals auf Nuancen von Bundieren und Zupfen verbessert wird.

Der Tubedreamer verwendet den legendären JRC4558D-Chip, um seinen klassischen Sound zu liefern, genau wie bei den originalen, begehrten 808ern, und führt außerdem einen größeren Verstärkungsbereich ein, der über den Kippschalter für die Hochverstärkungsstufe zugänglich ist.

With a carefully tuned, added midrange frequency register, the Tubedreamer delivers warm and rich overdriven sound through any amp.

A pivotal difference between the Tubedreamer and other Tubescreamers, is our choice to go with 3 diodes for asymmetrical clipping instead of symmetrical, enhancing the responsiveness of the pedal to fretting and picking nuances.

The Tubedreamer employs the legendary JRC4558D chip to deliver its classic sound, just like in the original, sought-after 808’s, and also introduces a wider gain range accessible by the high-gain-stage toggle-switch.

Demo by Alberto Barrero

Review by The Gear Page

Review by Squid Ink Guitar

TubeDreamer 58

PedalSafe Type A1.1

QuickMount Type A

Schutzabdeckung & RockBoard-Montageplatte für MXR® Standardgröße und Dunlop® Echoplex Delay Pedale

Protective Cover & RockBoard Mounting Plate For MXR® standard size and Dunlop® Echoplex Delay pedals

Schutzabdeckung & universelle Montageplatte für MXR® Standardgröße und Dunlop® Echoplex Delay Pedale

Protective Cover & Universal Mounting Plate For MXR® standard size and Dunlop® Echoplex Delay pedals

Comprised of photocells, a bulb, original NOS 2SC828 transistors and carbon comp resistors, the RetroVibe delivers the majestic sounds of the best Uni-Vibe pedals from back in the day, but housed in a modern pedalboard-friendly enclosure and featuring standard 9V DC operation internally lifted to 15V DC.

Choose between the Vibrato and Chorus settings and navigate from slow-rate wavy sounds all the way to fast Leslie-speaker effects!

Use it with any common passive 10k Expression pedal in conjunction with a standard TRS cable for real-time Speed control.

Review by Musiker-Board

Demo by Mikel Bluni

RetroVibe mk2

PedalSafe Type C

QuickMount Type C

Pedalmontageplatte für große vertikale Pedale

Pedal Mounting Plate For Large Vertical Pedals

Schutzabdeckung & RockBoard-Montageplatte für große vertikale Pedale

Protective Cover & RockBoard Mounting Plate For Large Vertical Pedals

Schutzabdeckung & universelle Montageplatte für große vertikale Pedale

Protective Cover & Universal Mounting Plate For Large Vertical Pedals

The Ernie Ball VP Jr 250k provides all the same great features as our original volume pedal while reducing your footprint by 22%. The VP 250k Jr is perfectly voiced for passive signals and features a compact, rugged design consisting of aircraft grade aluminum housing that is virtually indestructible. Directly behind the input jack under the footplate is a micro taper switch which provides the user two distinct volume swell rates.

Ernie Ball

Demo by Long & McQuade 

6180 VP JR. 250K

Für 10-20 FX-Pedale, 1 MOD-Slot - **622 x 424 mm / 24.49" x 16.69"** - erhältlich mit Gig Bag oder Flight Case

For 10 - 20 FX pedals, 1 MOD slot - **622 x 424 mm / 24.49" x 16.69"** - available with Gig Bag or Flight Case

Emanuel Knorr

Das RockBoard MOD 4 - All-in-One Wireless System Receiver + Patchbay für Pedalboards bietet eine einfach zu realisierende, kabellose Verbindung zwischen deinem Instrument und deinem Pedalboard. Dabei nutzt es eine digitale Wireless Technologie, die eine beeindruckende Klangqualität, ein einfaches Setup und eine zuverlässige Nutzung für aktive Musiker garantiert. Das Wireless System arbeitet im 2,4 GHz ISM Band und kann so weltweit ohne Beschränkungen genutzt werden. Mit einem nutzbaren Frequenzbereich von 20 Hz - 20 kHz und nur 5 ms Latenz bleiben keine Wünsche offen. Die Patchbay-Sektion wurde entwickelt um Verbindungen und Anschlüsse des Pedalboards von der Unterseite nach außen zu führen, dir einen zentralen Zugangspunkt zu deinem Setup zur Verfügung zu stellen und um deine Kabelwege aufzuräumen und sortieren zu können. Die A, B, C und D TRS Buchsen sind als direkte, durchgängige Verbindungen von der Vorderseite des MOD 4 zu den entsprechenden Buchsen auf der Rückseite verkabelt. Damit kannst du deine Effekt-Kette so einrichten, dass du bei der Vorbereitung auf den Gig lediglich Kabel an der Vorderseite des Boards einstecken musst, anstatt unter dem Board zu hantieren.
- Wireless System Receiver + Patchbay für Pedalboards, inkl. Wireless Transmitter
- 2,4 GHz ISM Band für weltweite Nutzung
- 30 m durchschnittliche Reichweite (ohne Hindernisse)
- 24 bit / 48 kHz unkomprimierte digitale Signalübertragung
- 20 Hz - 20 kHz Frequenzbereich
- 5 ms Latenz
- 103 dB Dynamikbereich
- 85 dBm HF-Empfindlichkeit
- 0.2% Verzerrung (THD)
- 4 wählbare Kanäle
- passend für MOD Slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe anderer Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 4x 6,3 mm Stereo-Klinke Thru (TRS)
- 1x 6,3 mm Mono-Klinke Receiver Audio Ausgang (TS)
- 1x DC 2,1 x 5,5 mm Hohlstecker Thru
- 1x AC IEC Thru
- 1x USB Type A Charge Ausgang
- Stromversorgung via optionalem 9V DC Netzteil, 2.1 x 5.5 mm Hohlstecker, Polarität (-) innen
- Batteriebetrieb nicht unterstützt
- Stromaufnahme 500 mA
- passiver Betrieb möglich (nur Patchbay, ohne Wireless System)
- Abmessungen mit Frontplatte (B x T x H): 175 x 85 x 47 mm
- Abmessungen ohne Frontplatte (B x T x H): 160 x 85 x 33 mm
- Gewicht 500 g
- Wireless Transmitter, zwei Antennen, ein USB Kabel, Montageschrauben und Muttern im Lieferumfang enthalten

The RockBoard MOD 4 - All-in-One Wireless System Receiver + Patchbay for Pedalboards offers an easy-to-use wireless connection between your instrument and your pedalboard, featuring digital wireless technology that delivers incredible audio quality, a simple setup procedure, and reliable use for any gigging musician. The wireless system works in the 2.4 GHz ISM band for unlimited worldwide use and offers a full 20 Hz - 20 kHz frequency range with only 5 ms of latency. The patchbay module is designed to route connections from underneath your pedalboard to its front, giving you a central access point and tidying up your connections. The A, B, C, and D TRS sockets are wiring thru-connections from the front of MOD 4 to the corresponding sockets on the back. This allows you to connect your pedals permanently underneath the board, so you only have to connect cables to and from the front of the board, instead of having to route underneath it when setting it up for a gig.
- wireless system receiver + patchbay for pedalboards, incl. wireless transmitter
- compatible with guitar wireless system
- 2.4 GHz ISM band for worldwide use
- 30 m / 100 ft. approx. range (without obstacles)
- 24-bit / 48 kHz uncompressed digital transmission
- 20 Hz - 20 kHz frequency range
- 5 ms latency
- 103 dB dynamic range
- 85 dBm RF sensitivity
- 0.2% total harmonic distortion
- 4 selectable channels
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- detachable front plate for mounting on top or underneath pedalboards
- 4x 6.3 mm / 1/4" stereo thru (TRS)
- 1x 6.3 mm / 1/4" mono receiver audio output (TS)
- 1x DC 2.1 x 5.5 mm barrel thru
- 1x AC IEC thru
- 1x USB Type A charge output
- power supply via optional 9V DC power adapter, 2.1 x 5.5 mm barrel plug, polarity (-) center
- battery operation not supported
- current draw 500 mA
- passive operation possible (patchbay only, without wireless system)
- dimensions with front plate (W x D x H) 175 x 85 x 47 mm / 6 57/64" x 3 11/32" x 1 27/32" 
- dimensions without front plate (W x D x H) 160 x 85 x 33 mm / 6 19/64" x 3 11/32" x 1 19/64"
- weight 500 g / 1.1 lbs
- incl. wireless transmitter, two antennas, USB charging cable, mounting screws, and counter nuts

2.4 GHz Guitar Wireless Receiver, Transmitter + TRS Patchbay

Die RockBoard® MOD 5 Cab SIM + DI Patchbay bietet wählbare, IR-basierte Stereo-Lautsprecher Simulation, eine aktive DI-Box, sowie eine einfache Lösung, um alle Verbindungen zu und von deinem Effekt Setup zu organisieren. Egal, ob du ein RockBoard® oder ein anderes Pedalboard einer anderen Marke verwendest - die MOD 5 eröffnet völlig neue Möglichkeiten. Mit der Speaker-Cab-Simulation und DI kannst du direkt loslegen und hast DEINEN Sound parat, unabhängig davon, welche Backline an der jeweiligen Venue zur Verfügung steht. Du möchtest deine persönliche Lieblings-Cabinet benutzen? Kein Problem, lade eine Impulse Response des Sounds in die MOD 5 und du hast sie überall dabei. Der Patchbay-Teil dient dazu, Verbindungen von unterhalb deines Pedalboards nach vorne zu leiten, um dir einen zentralen Zugangspunkt zu deinem Setup zu geben und deinen Kabelsalat aufzuräumen. Für geräuschloses Üben auf der Straße bietet der MOD 5 auch einen Kopfhörerverstärker mit einstellbarer Ausgangslautstärke.
- Cabinet Simulation & DI Patchbay
- IR basierte Lautsprecher Simulation
- 6 integrierte IRs wählbar
- Unterstützung von zusätzlichen Custom IRs (max. 1024 pts.)
- integrierte aktive DI Box
- Kopfhöhrer Verstärker
- passend für MOD Slots in RockBoard® Pedalboards
- kompatibel mit einer weiten Reihe anderer Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- wählbarer MONO / STEREO Input
- wählbarer UN- / BALANCED Output
- Ground Lift Schalter
- Regler für Phones Volume
- 3 x 6,3 mm TRS Thru
- XLR DI Out
- 6.3 mm Parallel TRS Output
- 3.5 mm Stereo Kopfhöhrer Ausgang mit einstellbarer Lautstärke
- micro USB Anschluss für Firmware Updates und zum Hochladen von Custom IRs
- Stromversorgung via optionalem 9V DC Netzteil, 2.1 x 5.5 mm Hohlstecker, Polarität (-) innen
- Stromaufnahme 300 mA
- Batteriebetrieb nicht unterstützt
- Abmessungen mit Frontplatte (B x T x H) 175 x 85 x 47 mm 
- Abmessungen ohne Frontplatte (B x T x H) 160 x 85 x 33 mm
- Gewicht 470 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The RockBoard® MOD 5 Cab SIM + DI Patchbay offers customizable, IR-based stereo speaker cabinet simulation, an active DI box, as well as a simple solution to organize all the connections to and from your effects setup. Whether you are using a RockBoard® or any other brand pedalboard - the MOD 5 will open completely new possibilities. The speaker cab simulation & DI let's you go direct, providing YOUR sound, whatever backline is being provided at the venue you're playing. Do you want to use your favorite cab? No problem, load an impulse response of its sound into the MOD 5 and you have it with you, wherever you go. The patchbay part is designed to route connections from underneath your pedalboard to its front, in order to give you a central access point to your setup and tidy up your connections. For silent and on the road practicing, the MOD 5 also provides a headphone amplifier with adjustable output volume.
- cabinet simulation & DI patchbay
- IR-based speaker cabinet simulation
- 6 integrated IRs selectable
- support of additional Custom IRs (max. 1024 pts.)
- integrated active DI box
- headphone amplifier
- fits MOD slots in RockBoard® pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- selectable MONO / STEREO input
- selectable UN / BALANCED output
- ground lift switch
- control for Phones Volume
- 3 x 6.3 mm / ¼" TRS thru
- XLR DI Out
- 6.3 mm / ¼" Parallel TRS output
- 3.5 mm / 1/8" stereo headphone output with adjustable volume
- micro USB connection for firmware updates and loading custom IRs
- power supply via optional 9V DC power adapter, 2.1 x 5.5 mm barrel plug, polarity (-) center
- current draw 300 mA
- battery operation not supported
- dimensions with front plate (W x D x H) 175 x 85 x 47 mm / 6 57/64" x 3 11/32" x 1 27/32" 
- dimensions without front plate (W x D x H) 160 x 85 x 33 mm / 6 19/64" x 3 11/32" x 1 19/64"
- weight 470 g / 1.04 lbs.
- incl. mounting screws, counter nuts, and TX wrench

Cab SIM + DI Patchbay

Sandbox Pedal Board

Rolands Majors

Heavy duty volume pedal with passive circuitry.

Dunlop

Review by Naz Pro

High Gain Volume Pedal GCB80

QuickMount Type M

Pedal-Montageplatte für Dunlop Cry Baby Wah-Pedale

Pedal Mounting Plates For Dunlop Cry Baby Wah Pedals

CM95 Clyde McCoy Crybaby

Nicolas Wilfer

Für alle, die ihre E-Gitarre perfekt abnehmen oder aufnehmen wollen, gibt es die BluBOX™ VSC: eine professionelle Impulse-Response-Speakersimulation in DI-Box-Form mit einer virtuellen Sammlung der bewährtesten Lautsprecherboxen der Musikgeschichte. Sie ist eine erstklassig klingende Soundlösung für den Direktanschluss jedes beliebigen Gitarrenverstärkers an eine PA oder ein Aufnahmepult.

Electric guitarists looking for the perfect way to mike up for live or for recording now have one of the simplest and most workable solutions available: the BluBOX™ VSC is a professional impulse-response speaker simulation in DI box form with a virtual collection of the best and most legendary speaker cabinets of all time. It is a first-class sounding sound solution for direct connection of any guitar amplifier to a PA or recording console.

BluGuitar

Demo by Jack Gardiner

Review by Gitarre & Bass

Review by AMAZONA

BluBOX VSC

Dieser einzigartige High-Gain-Amp im Pedal-Format liefert straffe und charaktervolle Sounds und stellt die perfekte Verbindung zwischen echtem Tube Tone und 100 Watt Power in einem unerreicht kompakten und leichten Format dar. In Zusammenarbeit mit erfahrenen, internationalen Metal-Gitarristen hat BluGuitar-Gründer und Profi-Gitarrist Thomas Blug diesen neuen Amp, der kaum klangliche Überschneidungen mit dem klassisch gevoiceten AMP1 Mercury Edition hat, abgestimmt und perfektioniert.

This unique high-gain amp in a pedal-format delivers tight, characterful sounds, and it is the perfect combination of real tube tone and 100 watts of power in an unrivaled compact and lightweight format. In cooperation with experienced, international metal guitarists, BluGuitar founder and professional guitarist Thomas Blug has developed this amp from the ground up, and, unlike the acclaimed AMP1 Mercury Edition, he voiced the AMP1 Iridium Edition uncompromisingly towards modern metal.

Addional Manual

Official Product Video 2

Demo by John Browne

Official Product Video 1

AMP1 Iridium Edition

Das AMPX, der sogenannte „virtuelle Lötkolben“, ist ein 100% analoges Verstärkerdesign mit der innovativen Neural Analog Amp Technologie von BluGuitar. Dieses Design ermöglicht das Bearbeiten und Speichern analoger Schaltkreisparameter auf Komponentenebene, wodurch der Verstärker die DNA praktisch jedes existierenden oder zukünftigen Röhrenverstärkerdesigns in authentischer analoger Röhrenklangqualität originalgetreu nachbilden kann. Dieselbe Technologie gilt für Pedale, Effekte und Lautsprechersimulationen, die ebenfalls bei Bedarf auf digitale Verarbeitung zurückgreifen. Das 100-Watt-Gerät in Pedalgröße wird mit einer umfangreichen Auswahl an Werkstönen geliefert und ist durch herunterladbare „BlugPRINTs“ aus einer Online-Bibliothek unbegrenzt erweiterbar. Die Installation eines BlugPRINTs ändert die analogen Schaltkreisparameter, um eine 100% authentische Reproduktion eines gewünschten Röhrenverstärkers zu erzeugen, was ein komplettes analoges, röhrenbetriebenes Gitarren-Rig bietet.

The AMPX, nicknamed the “virtual soldering iron,” is a 100% analog amp design featuring BluGuitar's innovative Neural Analog Amp technology. This design allows for editing and saving analog circuit parameters at a component level, enabling the amp to authentically recreate the DNA of virtually any existing or future tube amp design in analog tube tone quality. This same technology applies to pedals, effects, and speaker simulations, which also leverage digital processing where superior. The 100-watt, pedal-sized device comes with an extensive set of stock tones and is endlessly expandable via downloadable "BlugPRINTs" from an online library. Installing a BlugPRINT changes the analog circuit parameters to create a 100% authentic reproduction of a desired tube amp, offering a complete analog, tube-driven guitar rig.

Demo by The Studio Rats

Demo by Guitar Bonedo

Review by Guitar Interactive Magazine

Amp X

John was one of the first rock stars to join our TonePrint program and his sounds proved so popular we decided to cooperate intensely and capture his interpretations of classic TC effects. We joined forces, and the result is what happens when you set John free on the effects that inspire him.

    •    Six Signature Tones Designed by John Petrucci
    •    Chorus, flanger and vibrato in one pedal
    •    Custom voicing switch perfectly tuned to John’s custom ‘dark’ chorus sounds

Since they are such an integrated part of his “voice”, John knows our products like the back of his hand - so he knew exactly what he wanted, yielding some of the best sounding modulation effects out there.

Review by That Guitar Lover

Demo by TC Electronic 

Demo by Reverb

Dreamscape

Three effects pedals in one super cool enclosure!

Everything is possible with the Rumble Seat. This pedal can easily replace three pedals, saving you valuable space on your pedal board. Have one, two or three effects on – all at the same time. While the Rumble Seat is perfect for rock, surf and rockabilly. Guitarists of all styles appreciate the rich-sounding overdrive, delay and reverb packed into the Rumble Seat.

Analog Alien

Demo by The Color Company 

Demo by Brett Kingman

Demo by GregsGuitars

Rumble Seat

Für 9-18 FX-Pedale, 2 MOD-Slots - **722 x 330 mm / 28.43" x 12.99"** - erhältlich mit Gig Bag oder Flight Case

For 9 - 18 FX pedals, 2 MOD slots - **722 x 330 mm / 28.43" x 12.99"** - available with Gig Bag or Flight Case

The Lucydreamer is a Dry / Wet overdrive created with today’s bass masters’ needs and wants in mind.

It packs the following functions / features:

Dry / Wet Mix control

High-gain-stage footswitch which doesn’t affect the dry signal’s level

Internal trimmer to set the high-gain stage’s output level

Its overdrive circuit can track every little nuance of your playing with a wide gain-stage spectrum, ranging from highly dynamic tube-amp-like break-up, all the way to full- bodied high-gain saturation!

Owing its clipping merits to our “secret” chip, the Lucydreamer fluently tackles all the traditional tasks of an overdrive pedal and at the same time invites you to discover new ways of bonding with your bass lines!

Widen your palette of sounds, minimize pedalboard real estate and elevate your tone with the Lucydreamer!

Review by reddit /basspedals

Demo by Zachary Rizer

Demo by Patrick Hunter

Demo by Nate Navarro

Demo by BassTheWorld.com

LucyDreamer Bass

Handmade & Hand-painted in Greece, boutique analog guitar & bass pedals, made from the highest quality materials on the market, rare NOS chips, specially selected matched NOS transistors and carbon comp resistors. Most of our pedals are offered in optional point-to-point versions !

All of our pedals are true-bypass, so they don't affect your hard-earned tone.
Circuits begin with classic 60's and 70's vintage pedals that helped built the sound of Rock 'n' Roll, and end as our own, close or not so close to the original designs!

They burst with attitude as ALL of our stompboxes are hand-painted and decorated, from our in-shop-artists, and no two are alike !

Demo by JAM pedals

Delay Llama V1

In 2020 Jam Pedals had a special fundraiser for musicians who needed support. 15 big artists each picked their fave Jam pedal, and a limited, special edition of 10 was made in a sexy sparkle gold, and each signed by the artist. The pedals were then auctioned off to raise money for the charity of their choice.

Review by Guitar World

Review by Gearnews

Demo by EytschPi42

Bill Frisell Tube Dreamer 2020 - Gold sparkle

After years of recommending the WaterFall and the Ripple as a great combination, we set out to offer these two pedals, housed side-by-side in a single enclosure, with the introduction of the following unique features:

The middle footswitch triples the at-any-given-point WaterFall Speed, generating sounds ranging all the way from Leslie speaker simulation, to ring modulator effects and up to deranged warble!

Expression pedal inputs for sculpting the WaterFall’s Depth and Speed in real-time.