Nils Morten Alexandersen

Dual Stereo FX rig for Keyboards controlled by Morningstar MC6 Pro. CME uHost  for Wireless integration with Mac, and CME Wide Jack for Wireless midi to external devices and keyboards.

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 2 V2 wurde als Patchbay speziell für MIDI-basierte Setups, Verstärker und Geräte sowie eine USB-Verbindung zwischen Pedalboard und Computer oder Soundkarte entwickelt. Mit vier TRS-Through-Verbindungen lässt sich das MOD 2 V2 perfekt in True Stereo Setups von Keyboards oder Synthesizern integrieren oder als zentraler Zugang und Ausgang des Boards nutzen. Alternativ lassen sich Effektpedale im Front End und im Effekt-Loop des Verstärkers postieren (4-Kabel Methode).
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 4 x 6,3 mm TRS thru
- 2 x 5-pin DIN MIDI thru
- 1 x USB Type A thru
- 1 x DC 2,1 x 5,5 mm Hohlstecker thru
- 1 x AC IEC thru (männlich vorne / weiblich hinten)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 420 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 2 V2 is a pass-thru box especially designed for MIDI-controlled amplifiers and devices, USB connections to a computer, or a sound card. The 4x TRS thru connections will also work great for true stereo setups with keyboards or synthesizers. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 4 x 6,3 mm / ¼" TRS thru
- 2 x 5-pin DIN MIDI thru
- 1 x USB Type A thru
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 420 g / 0.93 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS, MIDI & USB Patchbay

Keyboard Effects Control Center

Christopher Garrison

CIOKS CRUX is the ultimate add-on to CIOKS DC7 if you are using a Neural DSP Quad Cortex, a Line 6 HX-series pedal or another power-hungry 9V or 12V multi-effects pedal. Simply connect the CRUX to the 24V outlet on DC7, set the correct voltage on CRUX, connect the appropriate CIOKS Flex cable from CRUX to your multi-effect pedal and you are good to go. 

Using CRUX frees up the outlets on DC7 that would otherwise be needed to run these devices (for instance four for a Neural DSP Quad Cortex and two outlets for a Line HX Stomp), allowing you to run more pedals along with your multi-effects device. CRUX therefore provides a simpler, more reliable setup and gives you more options for connecting additional pedals.

CIOKS

Product Page

Manual

Crux

Graham Hillier

USB-Host-MIDI-Schnittstelle, MIDI-Router + Filter + Mapper und optionales WIDI Bluetooth MIDI

USB Host MIDI Interface MIDI Router + Filter + Mapper & optional WIDI Bluetooth MIDI

H4MIDI WC

Branislav Vukobratovic

Die Cioks DC7 Mehrfach-Stromversorgung für Effektpedale stellt im Vergleich zu anderen Geräten dieser Art jeder Menge Energie bereit. Und das in einem flachen Gehäuse, das sogar unter ein Pedaltrain Nano Board passt. Das stattliche Kraftwerk bietet laut Angaben des dänischen Herstellers bei 9 Volt massive 4620 mA Strom und wäre damit rein rechnerisch in der Lage, ca. 577 Tubescreamer-Pedale (!) in Betrieb zu halten.

If you use effects pedals, whether on stage or in the studio, running them from a high-quality power supply is essential to getting the best performance and lowest noise out of them. The best power supplies have regulated, electrically isolated outputs, and that gives the same electrical separation as when running the pedals from batteries — but without the obvious disadvantages! There are several excellent power supplies available that offer such features, but CIOKS have managed to come up with an incredibly compact solution, seemingly without compromising on quality or flexibility.

Demo by The Pedal Zone 

Demo by CIOKS 

Review by

Review by bonedo 

DC 7

Markus Gödde

The first Mission pedal and still one of our top selling products, the SP-1 has two output jacks, one for the expression pedal and one for the switch. The SP-1 can be used with compatible devices such as digital effects and MIDI controllers to turn effects such as a wah or vibrato on and off at the pedal itself.

The SP-1 is compatible with many popular digital amps, effects and MIDI controllers including Fractal Audio Systems Axe-FX, FM3 and FC controllers and Voodoo Lab Ground Control Pro.

Mission Engineering

Demo by James Lebihan

SP-1-BK

Bass EARl

A part of a CME Wireless midi system. Accepts Midi on 3,5 mm TRS jacks. Can use USB-C for power, but can also get power from the TRS MIDI connection.

Widi Jack

Widi uHost

ch ray

Quad Cortex is the most powerful floor modeler on the planet. With a total of 6 cores (4x SHARC+ and 2x ARM Cortex-A5 running at 500MHz each), this ludicrous amount of processing capacity provides limitless sound design possibilities.

Neural Dsp Technologies

Review by wired

Review by The Gear Page

Review by Fractal Audio Forum

Review by guitarguitar

Quad Cortex 2.0 manual

Demo by EytschPi42

Demo by Neural DSP

Quad Cortex

Patrick Dougherty

With a massive display upgrade, an entirely new processor and a never-before-seen array of connections, MC6 PRO is by far the most powerful and user-centered MIDI controller yet.

Morningstar Engineering

Morningstar Product Page

Review by reddit /guitarpedals

Review by Gearspace

Review by Six String Sensei

Demo by SON WU

Official Product Video

MC6 Pro

Für 7-12 FX-Pedale, 1 MOD-Slot - **470 x 330 mm / 18.50" x 12.99"** - erhältlich mit Gig Bag oder Flight Case

For 7 - 12 FX pedals, 1 MOD slot - **470 x 330 mm / 18.50" x 12.99"** - available with Gig Bag or Flight Case

andronik supersonik

Der RockBoard Pedalboard Drawer ist eine simple aber extrem effiziente Lösung zum Organisieren und Verstauen von optionalem Zubehör in einem RockBoard Pedalboard. Der Pedalboard Drawer wurde entwickelt, um Zubehör wie Kabel, Plektren, Wireless Systeme und vieles mehr im MOD Slot des Pedalboards aufzubewahren. Durch den zentralen Zugang auf der Front des Pedalboards bietet der Drawer einen sichereren, sauberen und einfach zugänglichen Platz zur Aufbewahrung direkt am Setup. Durch die intelligente Arretierung der rotierenden Schublade ist eine zusätzliche Sicherung nicht notwendig.

- rotierende Schublade für RockBoard Pedalboards
- intelligenter Drehmechanismus mit sicherer Arretierung
- für Zubehör, Kabel, Wireless Systeme, Plektren, etc.
- passt in die MOD-Slot Aussparung von RockBoard Pedalboards (außer RockBoard DUO 2.0, 2.1, und 2.2)
- Material: Verstärktes Polyamid
- inkl. Montagematerial und Werkzeug
- Maße (B x T x H): 175 x 84,5 x 47 mm
- Gewicht: 150 g
- schwarz
- Hinweis: Nicht kompatibel mit den 19" Rack Panel Single oder Double (1U) - Rack Mount for RockBoard MOD

The RockBoard Pedalboard Drawer is a simple but super effective solution to organize and store optional accessories in your RockBoard pedalboard. The Pedalboard Drawer is designed to store accessories such as cables, picks, wireless systems and more directly in the MOD slot of the pedalboard. With access on the front of the pedalboard, the Drawer provides a safer, cleaner, and convenient place for storage. The Drawer opens and closes using an intelligent swivel locking mechanism.

- rotating mounting drawer for RockBoard pedalboards
- intelligent swivel locking mechanism
- for accessories, cables, wireless systems, etc.
- fits MOD slots in RockBoard pedalboards (except RockBoard DUO 2.0, 2.1, 2.2, and 2.3)
- material: reinforced polyamide
- incl. all mounting screws, counter nuts, and tools
- dimensions (W x D x H): 175 x 84.5 x 47 mm / 6 57/64" x 3 21/64" x 1 27/32"
- weight: 150 g / 0.33 lbs
- black
- Note: Not compatible with 19" Rack Panel Single or Double (1U) - Rack Mount for RockBoard MOD

Rotating Drawer for RockBoard Pedalboards

analog-stereo mesa

Bruce Lambelle-Rudd

Der Stereo AB Input Switch v2 ist ein passiver Fußschalter, der einen einzigen Instrumenteneingang zu zwei separaten Verstärkerausgängen oder Effektwegen leitet. Mit True-Bypass-Schaltung und LED-Anzeigen für jeden Ausgang gewährleistet er geräuschloses, transparentes Umschalten ohne Signalverlust. Untergebracht in einem robusten Aluminiumgehäuse, benötigt er keine externe Stromversorgung.

The Stereo AB Input Switch v2 is a passive footswitch that routes a single instrument input to two separate amplifier outputs or effects chains. With true-bypass switching and LED indicators for each output, it ensures silent, transparent switching without signal loss. Housed in a rugged aluminum enclosure, it requires no external power.

Bright Onion Pedals

Stereo AB Input Switch v2

Das leistungsstarke Atomic™ Isolated Power Supply wurde entwickelt, um den hohen Stromanforderungen der Effectrode-Röhrenpedale gerecht zu werden. Es verfügt über eine einzigartige „Soft-Start“-Spannungsfunktion, die das Aufblitzen der Röhrenheizfäden verhindert und die Lebensdauer der Röhren maximiert.
Wird mit einem länderspezifischen IEC-Netzkabel und vier DC-Stromkabeln geliefert.

The mighty Atomic™ Isolated Power Supply is developed to meet the high power requirements of Effectrode tube effects pedals. Includes a unique "soft-start" voltage capability, which eliminates tube heater filament flash and maximise the life of the tubes.\r\nSupplied with country-appropriate IEC power cable and four DC power leads.

Effectrode

Demo by Everything Guitar

Atomic Power Supply

Tester

GigRig

Gigrig Humdinger Manual (Jan 2023)

Humdinger Product Page

Humdinger

Say hello to the world’s most compact reorderable audio loop switcher.

A fully analog stereo loop switcher designed to break boundaries. 
Each stereo loop can be broken up into 2x mono loops with an Y-cable and in the looper used as 2x complete independent mono loops (Y-TRS-Cables). As these cannot be displayed in this tool (but often used to double the loops on big boards) we configured in this tool 3 stereo connections as 6x mono loops. 

ML10X is the answer for today's musicians.

Review by 

Demo by 

ML10X (5 Stereo Loop)

This little green wonder is the world’s smallest tube buffer pedal. Inside is a Sylvania pencil tube operating at 300V, which means the Glass-A™ can effortlessly handle massive signal levels and transients from piezo crystal and high-output active magnetic pickups without distortion for an incredibly open, natural and transparent sound.

Glass-A Triode Buffer

The Tube-Vibe™ is a no compromise, innovative and original re-design of the classic Uni-Vibe pedal. However, instead of transistors, the Tube-Vibe utilises vacuum tubes, photocells and a pulsating filament lamp to generate exceptionally rich, swirling chorus and vibrato effects.

Review by musicradar

Demo by gilmourish

Demo by Mike Hermans

Tube Vibe

BOSS

TU-3S Tuner

DC-2W Dimension C (Waza Craft)

PedalSafe Type E1

QuickMount Type E

Pedal-Montageplatte für Standard-Boss-Pedale

Pedal Mounting Plate For Standard Boss Pedals

Schutzabdeckung & RockBoard-Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & RockBoard Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Schutzabdeckung & universelle Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & Universal Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Der PC-2A ist ein echter Vintage-Studiokompressor in einer Stompbox – es gibt keine billigen VCA-Chips, Operationsverstärker oder Billigkomponenten im Signalpfad, der zu 100 % analog ist und auf einer handverlesenen Fotozelle, Polyester-Kopplungskondensatoren, Präzisionswiderständen (mit Silber-/Palladiumkontakten) und einer Sylvania N.O.S. (New Old Stock) 6111 Subminiaturröhre basiert, die mit echten Verstärkerplattenspannungen betrieben wird, und das alles auf einer speziellen versilberten Leiterplatte.
Die Röhrenschaltung liefert jede Menge Head-Room und ein sehr, sehr geringes Grundrauschen für herausragende Dynamik, wobei die Attack-Eigenschaften erhalten bleiben und gleichzeitig eine musikalische und natürliche Kompression erzeugt wird – der PC-2A hüllt Ihr Signal in Samt und verbessert Ihren Gitarrenklang, ohne ihm eine Halbleitersignatur aufzudrücken. Nützlich in Live-Situationen, um „Punch“ hinzuzufügen oder dünne Single-Coil-Tonabnehmer aufzumotzen, und unverzichtbar bei der direkten Aufnahme auf digitale Audio-Workstations (Computer), um hässliche vorübergehende Verzerrungsartefakte zu vermeiden, die moderne digitale Aufnahmegeräte bei Überlastung erzeugen.

The PC-2A is a true vintage studio compressor in a stompbox—there are no cheap VCA chips, opamps or budget components in the signal path which is 100% analogue and built on a hand selected photocell, polyester coupling capacitors, precision resistors (with silver/palladium contacts) and Sylvania N.O.S. (new old stock) 6111 sub-miniature tube operating at real amp plate voltages all on a special silver-plated printed circuit board.
The tube circuitry delivers stacks of head-room and very, very low noise floor for outstanding dynamics, preserving the attack characteristics while creating musical and natural compression—the PC-2A wraps your signal in velvet, enhancing your guitar tone without stamping a solid-state signature on it. Useful in live situations for adding ‘punch’ or fattening up thin single coil pickups and indispensable when recording direct to digital audio workstations (computer) to prevent nasty transient distortion artefacts that modern digital recording devices produce if overloaded. 

Review by Compressor Pedal Reviews

PC-2A Tube Compressor

Michael Hodgson

The EP-25K features a 25K Ohm potentiometer that is required by some devices compared to the 10K potentiometer in the Mission EP-1. The two isolated outputs can be used to control two effects simultaneously.

Demo by Sean Pierce Johnson

EP-25K Expression pedal

Expressionator

Paul De maio

MC8 Pro

The Replicator D’Luxe is a sum up from all the knowledge, we have built up over the years, making
Tape delays.
it is a 2 head machine. The drive mechanism has been updated with a noiseless belt drive. A tape lock/release mechanism is added, to make the pinch wheel and tape last longer and electronics has been tuned to perfection.

T-Rex

Demo by Martin Klaja's Guitarchannel

Demo by Duskmos

Demo by T-Rex Effects

Review by GEOFF KING, mixdownmag.com.au

Replicator D'LUXE

On more subtle settings the Phaseomatic tube phaser pedal creates a beautiful, natural sounding vibrato (frequency modulation) and shimmering phasing effects, utilising exactly the same one- and two-stage “Cathodyne” tube circuitry used to in those incredible vintage Magnatone® amps. However, the Phaseomatic’s all-tube circuitry has two additional Cathodyne phase inverters, which allow it to generate a much richer, deeper vibrato and even intense, deep “tunnel” phasing as well as a host of cosmic and spacious sound effects heard on many 1950′s “B” science fiction movie soundtracks.

Phaseomatic Vacuum Tube Phaser

The Fire Bottle™ is an all-tube booster specially designed to enhance the tone of single coil pickups. With up to 30dB of gain on tap, this powerful boost pedal can push the input stage of a tube amp into beautiful breakup and rich overdrive, creating glassy, bolder, larger-than-life Stevie Ray Vaughan Strat® guitar sounds.

Review by Musiker-Board

Fire Bottle

The Delta-Trem™ authentically recreates the alluring, hypnotic tone and feel of vintage guitar amp tremolo in S-T-E-R-E-O! This is accomplished using vacuum tubes and an archaic, long forgotten electronic component known as a ‘Raysistor’, essentially a tiny filament lamp and photocell housed together in a small metal can. The combination of Raysistor and all-tube circuitry tube creates an exceptionally smooth, rich and musical tremolo effect that blends well with clean and overdriven guitar sounds. The true stereo signal path allows the Delta-Trem to operate as a mono tremolo with a single guitar amp or into two amps, where the sound ping-pongs between them creating a huge, 3-D, spacious tone.

Review by Anatomy of Guitar Tone

Demo by DMTR Pedal Shop

Delta-Trem

The Blue Bottle™ Inductorized Booster pedal has been custom designed for blues/rock guitarist John Verity to enable him to achieve a fatter, more bluesy B.B. King ‘335’ tones from his Strat-type guitars. It’s the perfect vintage mid-boost—never too aggressive or over-the-top—for low output single coil pickups.

Review by Guitar World

Demo by John Verity

Blue Bottle

Cited as a major influence by wah masters such as Hendrix, Clapton, and Vaughn, Buddy Guy helped establish the effect as part of the blues vocabulary. To honor his contributions we have created the Buddy Guy Cry Baby Wah, featuring the Fasel Inductor for a sweet and singing top end, and two distinct user selectable wah voices—choose "DEEP" for a big and throaty growl, or "BG" for Buddy's own warm and bell-like wah tone. Convenient side-mounted LEDs indicate which mode you are in, while a separate LED indicates effect on/off. Let your guitar sing the blues in style with the Buddy-approved polka dot graphics and custom signature tread.

Dunlop

Review by Simon Bradley, musicradar.com

Demo by Guitar World

BG95 Buddy Guy Crybaby Wah

QuickMount Type M

Pedal-Montageplatte für Dunlop Cry Baby Wah-Pedale

Pedal Mounting Plates For Dunlop Cry Baby Wah Pedals

Ruben Shannon

The Effectrode® ‘LA-1A’ Leveling Amplifier is a high-end, studio-grade vacuum tube compressor in a pedal. Whisper-quiet operation and a wide, wide dynamic range make this tone-tool an unparalleled tone enhancer on stage and in the studio—its natural warmth and clarity are unmatched.

Review by CompressorPedalReviews

Demo by Electric Mojo Guitars

Review by loopersparadise

LA1A Levelling Amplifier

Demo by Joe Perkins

Mercury Tube Fuzz

Für 15-25 FX-Pedale, 6 MOD-Slots – zwei Ebenen - **826 x 498 mm / 32.52" x 19.61"** - erhältlich mit Gig Bag oder Flight Case

For 15 - 25 FX pedals, 6 MOD slots, two levels - **826 x 498 mm / 32.52" x 19.61"** - available with Gig Bag or Flight Case

BASS TUBE

Janez Jelen

Introducing a brand new version of the Oracle - a single channel, vacuum tube pre-amplifier inspired by the iconic Portaflex Bass amps of the 1960's. The buffered 1/4" output provides ample gain to feed a modern power amp or the line input of your recording interface. For use as an effect pedal, simply turn down the Master control (all knobs at noon is unity gain). The DI output features a high quality output transformer, with Mu Metal shielding for ultra quiet operation.

The heart of the Oracle is a single 12AX7 tube, selected for low noise and good tone, and fed by a 300VDC power supply.

Arkham Sound

Demo by Low-End Reviews

Review by reddit /basspedals

Review by Bass Musician Mag

Review by Talk Bass.com

Oracle

Suwannaphum Padsapan

REDDI is a fire-engine red tube direct box with an unquestionable quality of sound. This is best foot forward in giving the audio world a truly remarkable product at an affordable price.

The REDDI has been field tested and referred by recording engineers to be the "best tube DI ever made".

With wider bandwidth and just the right amount of gain, the REDDI stands clear and clean above the competition.

Great for Basses, Guitars, Synths and electronic instruments that require a direct box for recording, the REDDI is READY to give you unsurpassed sound for that perfect recording or live performance.

A-Designs

REDDI

The micro-Thumpinator is a bandwidth optimizer designed for bass guitar. It removes the low frequency signals that are outside the range of notes produced by the instrument.

Infrasonic frequencies cannot be reproduced by standard bass cabinets but they often make amplifiers clip, especially when they are set to boost the lower frequencies. The Thumpinator filters the signal content optimising the energy delivered by the amplifier. Low-frequency clip is substantially reduced and the sound is tighter especially at high volume levels.

The micro-Thumpinator accepts instrument and line level signals. It can be used between preamplifier and amplifier, between bass and amplifier or anywhere in the effect chain (line or instrument level). It can also be connected directly to an audio interface.

SFX Sound

Demo by Paul Reich

micro-Thumpinator v2

With the TU-3W, BOSS brings Waza Craft mojo to the world’s leading stompbox tuner. At its core, the TU-3W provides rock-solid tuning equivalent to the industry-standard TU-3. In true Waza tradition, the pedal’s benchmark functionality is further enhanced with BOSS skill and craftsmanship. Pure, uncolored signal transfer is essential for a tuner, and the TU-3W features redesigned circuitry with selectable buffered or true-bypass operation and the most transparent audio pass-through possible. Packing high-end performance for discriminating players, the TU-3W delivers a premium pedal experience only available from BOSS.

TU-3W Tuner

Für 5-10 FX-Pedale, 1 MOD-Slot - **442 x 236 mm / 17.40" x 9.29"** - erhältlich mit Gig Bag oder Flight Case

For 5 - 10 FX pedals, 1 MOD slot - **442 x 236 mm / 17.40" x 9.29"** - available with Gig Bag or Flight Case

Stoyan Tsonev

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 3 V2 ist eine Patchbay für Sänger und Akustik-Musiker. Über die zwei XLR-Ausgänge kannst du ein Stereo-Signal von dein MOD senden und an den XLR-Eingang lässt sich ein Mikrofon anschließen. Mit drei TRS-Through-Verbindungen lässt sich das MOD 3 V2 außerdem als zentraler Zugang und Ausgang des Boards nutzen um zum Beispiel Effektpedale in den FX-Loop eines Verstärkers einzuschleifen.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 3 x 6,3 mm TRS thru
- 2 x XLR thru (männlich vorne / weiblich hinten)
- 1 x XLR thru (weiblich vorne / männlich hinten)
- 1 x DC 2,1 x 5,5 mm Hohlstecker thru
- 1 x AC IEC thru (männlich vorne / weiblich hinten)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel


The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 3 V2 is a pass-thru box designed for use by vocalists and acoustic players. The 2x XLR outputs allow you to send a stereo signal from your MOD and the 1x XLR input can be used to connect your microphone. You can also use it to run several pedals from your board through the effects loop of your amp, or simply use the MOD as a central access point to your pedalboard.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 3 x 6,3 mm / ¼" TRS thru
- 2 x XLR thru (male front / female back)
- 1 x XLR thru (female front / male back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR Patchbay for Vocalists & Acoustic Players

Quad Cortex Board

MIDI Keyboard Controller

Shael Risman

M-Audio SP-2 | Universal Sustain Pedal with Piano Style Action For MIDI Keyboards, Digital Pianos & More, Original Version, 1 Function

M-Audio

Demo by Jack Picks

Demo by Piano From Scratch

SP-2 Sustain Pedal

TE-2 Tera Echo

Das Digitech Freqout Natural Feedback Creator Effektpedal gehört zu den eher exotischen Vertretern im Pedalboard. Es widmet sich der Erzeugung von Rückkopplungen, die zwar zum Repertoire jedes gepflegten (Rock-) Gitarristen gehören, aber üblicherweise nur mit entsprechender Lautstärke und der Interaktion zwischen Amp, Box und Gitarre möglich sind. Mit dem E-Bow, der seit Mitte der 70er Jahre erhältlich ist, gibt es bereits ein Werkzeug, das die Saiten per Magnetfeld beliebig lang in Schwingung versetzt, indem es über die gewünschte Saite gehalten wird. Oder den Sustainer von Fernandes, ein Pickup, der ebenfalls die Saiten zum Schwingen bringt, wenn er per Schalter dazu aufgefordert wird. Und natürlich muss beim Umbau der Gitarre einer der vorhandenen Tonabnehmer dem Sustainer weichen.

The DigiTech FreqOut Natural Feedback Creator allows you to get sweet, natural feedback at any volume, with or without distortion. The FreqOut is perfect for situations where volume must be controlled like in the studio, with in ear monitors, or low-volume performance and practice. However, the FreqOut can also be used at gig volume to focus out-of-control feedback on a preferred harmonic at any stage position. The FreqOut uses a 9VDC power supply to easily integrate into your existing pedalboard.

DigiTech

Review by Bonedo 

Review by Amazona 

Demo by Mike Hermans 

FreqOut

Nicolas Wilfer

Arguably the most important pedal on your board, the Canvas Tuner ensures that your instrument is ready to sound its best with the perfect meld of versatility and precision. The Canvas Tuner ensures that you have the most accurate brush to paint your sonic picture.

Walrus Audio

Video Manual

Official Product Video 

Canvas Tuner

QuickMount Type A

Pedal-Montageplatte für Standard-Einzelpedale

Pedal Mounting Plate For Standard Single Pedals

Shane Werley

The pedal connects to the EXP inputs on the Quad Cortex. The linear potentiometer is matched exactly for a precise and natural response. The toe switch can be used turn effects on and off without requiring a separate footswitch.