Jon Buckner

- AC30 Input: Gtr > PTEQ > ML-2 > Pitchblack XS
- AC30 FX Loop: Turbo flange > DL-2 > RC-5
- FS-6 Left:
- - A: AC30 Tremolo
- - B: AC30 Reverb
- RC-5: 
- - Record/Play/Dub
- FS-6 Right:
- - A: Stop/Delete
- - B: Undo/Redo


SE812

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 1 V2 ist eine Pass-Through-Box, die speziell für Gitarristen und Bassisten entwickelt wurde. Du kannst das MOD 1 V2 nutzen um mehrere Pedale deines Setups im Front End und im Effekt-Loop des Verstärkers zu postieren (4-Kabel Methode) oder die vier TRS-Anschlüsse als zentralen Zugang und Ausgang des Boards nutzen. Die XLR-Through-Verbindung kann als Signalausgang vom Pedalboard zum Mischpult oder zur PA verwendet werden.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 5 x 6,3 mm TRS thru
- 1 x XLR thru (männlich vorne / weiblich hinten)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 5 x 6,3 mm / ¼" TRS thru
- 1 x XLR thru (male front / female back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR, IEC & Barrel Patchbay

Quad.4.4 Loop Focused. Non-Music  Right Side

Footswitch

Harley Eisenbarth

When Vox determined that the circuitry from the original Tonelab tabletop multi-effects processor could be installed inside the VC12, the second generation Tonelab, the Tonelab SE, was born.

The Tonelab SE was optimized for live performance. It ditched the digital S/PDIF connector used for recording purposes while keeping a pair of ¼" analog stereo outputs. The Tonelab SE also increased the number of effects available from 22 in the standard Tonelab to 50 in the SE.


Product Page

Review by Musiker-Board

Review by reddit /Guitar

Manual

Demo by PLAY YOUR GUITAR

Demo by Tone Works

Tonelab SE

Tester

The Turbo Flange delivers 7 operational modes, instead of the typical one mode only that you find in some other pedals. These operational modes are easily selectable using the mode control allowing you to choose from a selection of awesome voicing sounds, triggering feature, and useful step functions. Now you are no longer limited to a one-trick pedal. You can dial in the exact phaser or flanger sound you want! The Turbo Flange has Speed, Depth, Regen, and Mode controls. Outputs for both pedals include Out 1 (Mono) and Out 2 for stereo operation.

DigiTech

Demo by Pedal Experiments

Demo by Do Noise

Review by Talk Bass.com

Review by Harmony Central

Review by Ultimate Guitar

Review by reddit /guitarpedals

Turbo Flange

Nick Toye

BOSS

FS-6

Demo by PMTV UK

Official Product Video

Review by Guitar World

Review by Sound Crunch

RC-5 Loop Station

PedalSafe Type E1

QuickMount Type E

Pedal-Montageplatte für Standard-Boss-Pedale

Pedal Mounting Plate For Standard Boss Pedals

Schutzabdeckung & RockBoard-Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & RockBoard Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Schutzabdeckung & universelle Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & Universal Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

DM-2W Delay (Waza Craft)

Dies ist der aggressivste Verzerrer, den BOSS je gebaut hat - für den harten Kern der Metal-Fangemeinde! Extremste Verzerrung mit bissigem Attack für härteste Riff-Arbeit! Wo brutale Sounds gefragt sind, ist der ML-2 Metal Core die richtige Waffe: Death Metal, Industrial, Grind Core, Extreme Metal, etc.

Die Tiefenregelung des LOW-Reglers sorgt für extreme Bässe auch für 7-saitige Gitarren und Drop-Tunings, die HIGH-Regelung kann für schneidende, metallische Höhen sorgen. Ultra-heftig!

With its extreme gain, the ML-2 is the most potent and heavy distortion pedal ever created by BOSS. It easily delivers massive distortion and gain with heavy lows for playing Nu Metal, Grind Core, Industrial, Hard Core, or any genre that requires crushing sound. The ML-2’s ferocious and biting tone will complement and cut through any blast beats your rhythm section can create.

Review by The Gear Page

Review by Sweetwater

Review by Reddit /guitarpedals

Demo by  Dome

Demo by  Amps, Pedals & Pickups

Demo by Victor Hugo Targino

ML-2 Metal Core

Gerhard Lothschuetz

Der Pitchblack XS bietet außer dem True Bypass-Modus für die naturbelassene Ausgabe des Eingangssignals auch einen ULTRA-BUFFER.

Was ist daran so besonders?

Die meisten E-Gitarren sind mit passiven Tonabnehmern ausgestattet und haben eine entsprechend hohe Ausgangsimpedanz. Bei Verwendung eines Gitarrenkabels von 6m oder länger geht im Höhenbereich je länger je mehr vom Gitarren-Sound verloren. Ein Puffer kompensiert diese Signalbeeinträchtigung und somit den Sound-Verlust für lange Kabel – selbst, wenn die Stimmfunktion aus ist.

Der ULTRA-BUFFER verbessert die Klangqualität im Bypass-Betrieb und erhält bei Verwendung eines langen Kabels somit den Sound, ganz gleich, ob es direkt mit dem Tuner oder zunächst mit einem komplexen Effekt-Board verbunden ist.

Der Pitchblack XS erlaubt Wechsel zwischen dem True Bypass- und dem Ultra Buffer-Modus, um in jeder Lebenslage den optimalen Sound zu erzielen.

The Pitchblack XS not only features a true bypass for outputting the sound exactly as it was input, but now includes a built-in ULTRA BUFFER.

Why is this important?

The majority of electric guitars use passive pickups with a high impedance output. When you are using a cable there is a loss of tone, usually high frequencies, after about 6 m (around 18 feet) and this problem gets worse the longer your cable. A buffer boosts the signal over long cables to avoid loss of tone, keeping it clean and clear - even when your pedal is off.

The ULTRA BUFFER enhances the sound quality in bypass mode, so that you can still maintain audio quality even when using a long cable to connect to the tuner, or when inserting the tuner into a complex effects board.

On the Pitchblack XS, you can switch between true bypass and the ULTRA BUFFER, according to your tastes and environment.

KORG

Pitchblack XS

Dunlop

DB01 Dime Crybaby from Hell

QuickMount Type M

Pedal-Montageplatte für Dunlop Cry Baby Wah-Pedale

Pedal Mounting Plates For Dunlop Cry Baby Wah Pedals

daniel lee

Der Pentatone Equalizer ist eine eigenständige Version des 5-Band-Equalizer-Teils im Ibanez Pentatone Preamp. Mit einem kontinuierlich veränderbaren Q-Regler für jedes Band, der eine größere Vielfalt an Klangkreationen ermöglicht, bietet er noch präzisere Klanggestaltungsmöglichkeiten. Darüber hinaus sorgt die ±9V Stromversorgungstechnik für eine hohe Headroom. Damit eignet sich der parametrische Equalizer nicht nur für E-Gitarren, sondern auch für Signalquellen mit höherem Pegel wie E-Bässe und Keyboards.

The Pentatone Equalizer is a standalone version of the 5-band equalizer section in the Ibanez Pentatone Preamp. Adding a continuously variable Q control on each band, which allows for a wider variety of sound creation, enables even more detailed sound creation. Furthermore, the ±9V power supply circuitry provides a wide headroom. That makes the parametric equalizer suitable for not only electric guitars but also higher-level output signal equipment such as electric bass guitars and keyboards.

Ibanez

Demo by Sweetwater

Demo by EytschPi42

Review by sevenstring.org

Pentatone PTEQ

QuickMount Type J

Pedal-Montageplatte für mittelgroße Strymon-Pedale

Pedal Mounting Plate For Medium Size Strymon Pedals

M242 Iso-Brick Pro

Für 9-18 FX-Pedale, 2 MOD-Slots - **722 x 330 mm / 28.43" x 12.99"** - erhältlich mit Gig Bag oder Flight Case

For 9 - 18 FX pedals, 2 MOD slots - **722 x 330 mm / 28.43" x 12.99"** - available with Gig Bag or Flight Case

20251217

Ein grafischer Equalizer, mit dem Sie den Frequenzbereich und die Q-Breite für die Klangformung von Gitarren einstellen können. Mit Nutube in der Vorverstärkersektion werden durch Anheben des Pegels charakteristische Röhrenobertöne und Kompression hinzugefügt. Wählen Sie Frequenzbänder von 100Hz/250Hz/570Hz/800Hz/2,2kHz/5,6kHz, die für eine intuitive Klangformung ausgelegt sind. Zur Erleichterung der aktiven Klangformung sind die Frequenzbänder so eingestellt, dass sie durch Verbreiterung der Q-Breite effektiver sind als bei einem typischen grafischen Equalizer. Es ist einfach, zwischen Backing und Solo zu wechseln sowie allgemeine Einstellungen vorzunehmen. Der Einsatz von Nutube im Vorverstärker sorgt für eine musikalische Verzerrung, wenn der Pegel erhöht wird. Das Fehlen eines Mittenklicks wurde absichtlich für einfache und feine Einstellungen konzipiert.

A graphic equalizer that allows you to set the frequency range and Q width tailored for guitar tone shaping. With Nutube in the preamp section, raising the level adds distinctive tube harmonics and compression. Choose frequency bands of 100Hz/250Hz/570Hz/800Hz/2.2kHz/5.6kHz, designed for intuitive tone shaping. To facilitate active tone shaping, the frequency bands are set to be more effective by widening the Q width compared to a typical graphic equalizer. It’s easy to use for switching between backing and solo, as well as for overall adjustments. The inclusion of Nutube in the preamp provides a musical distortion when the level is increased. The absence of a center click is intentionally designed for easy and fine adjustments.

Demo by  shadow's toy box

Demo by 楽器好きにはたまらない! フーチーズ 渋谷店 

Review by AMAZONA

Review by bonedo

Valvenergy Tone Sculptor

FUEL INJECTOR offers a distinctive overdrive with clean characteristics, rich harmonics, and a natural sense of compression and bite. Developed by amp manufacturer VOX, this overdrive pedal stands out for its amp-like distortion, in contrast to typical pedal distortions. Unlike effects that color the tone like preamp-style pedals, FUEL INJECTOR preserves its natural characteristics while distorting through Nutube, providing a tone that sounds as if your connected amp is pushed into even more distortion. Compared to many drive pedals, including TS-style ones, it features overwhelming harmonic components and a pronounced compression characteristic reminiscent of a tube amp. The harmonic richness created by distorting Nutube in multiple stages, along with the bias variations unique to tubes, produces a resonant tone, capturing the essence of an amp-like sound.

Demo by  THE AMP SHOP西田製作所 

Review by Sound on Sound

Review by Guitar Bomb

Valvenergy Fuel Injector

 Introduced by VOX in 1967, the Wah-Wah pedal stemmed from the Midrange Boost feature of a VOX amp design and was initially marketed as a way to emulate Clyde McCoy’s trumpet mute technique. However, an unintended but music-changing use with electric guitar turned the Wah pedal into a vital tool for renowned artists such as Jimi Hendrix and Eric Clapton, driving the creation of now-legendary performances and songs. From the 1960s to today, the Wah pedal has become an essential tool for guitarists.

The new Real McCoy wah pedal perfectly emulates the original wah down to the component level. VOX engineers have worked hard to unravel the mysteries of the vintage McCoy wah model, resulting in a pedal that meticulously replicates the exact tonal characteristics.

The Real McCoy is voiced for the iconic nasal tone of the original wah model, with an accentuated midrange that imparts a warm and melodic character to your guitar.

Demo by BUZZBEE TV

Demo by kisugita_DIY

Real McCoy Wah VXVRM1

Introduced by VOX in 1967, the Wah-Wah pedal stemmed from the Midrange Boost feature of a VOX amp design and was initially marketed as a way to emulate Clyde McCoy’s trumpet mute technique. However, an unintended but music-changing use with electric guitar turned the Wah pedal into a vital tool for renowned artists such as Jimi Hendrix and Eric Clapton, driving the creation of now-legendary performances and songs. From the 1960s to today, the Wah pedal has become an essential tool for guitarists.

The new Real McCoy wah pedal perfectly emulates the original wah down to the component level. VOX engineers have worked hard to unravel the mysteries of the vintage McCoy wah model, resulting in a pedal that meticulously replicates the exact tonal characteristics. The Real McCoy Limited wah pedal is also available in a stunning chrome finish.