James Squire

Wet/Dry board - used at Carols event in 2025. Had issues with the DISO+ (excessive noise and feedback when summing stereo XLR outputs.

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 3 V2 ist eine Patchbay für Sänger und Akustik-Musiker. Über die zwei XLR-Ausgänge kannst du ein Stereo-Signal von dein MOD senden und an den XLR-Eingang lässt sich ein Mikrofon anschließen. Mit drei TRS-Through-Verbindungen lässt sich das MOD 3 V2 außerdem als zentraler Zugang und Ausgang des Boards nutzen um zum Beispiel Effektpedale in den FX-Loop eines Verstärkers einzuschleifen.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 3 x 6,3 mm TRS thru
- 2 x XLR thru (männlich vorne / weiblich hinten)
- 1 x XLR thru (weiblich vorne / männlich hinten)
- 1 x DC 2,1 x 5,5 mm Hohlstecker thru
- 1 x AC IEC thru (männlich vorne / weiblich hinten)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel


The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 3 V2 is a pass-thru box designed for use by vocalists and acoustic players. The 2x XLR outputs allow you to send a stereo signal from your MOD and the 1x XLR input can be used to connect your microphone. You can also use it to run several pedals from your board through the effects loop of your amp, or simply use the MOD as a central access point to your pedalboard.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 3 x 6,3 mm / ¼" TRS thru
- 2 x XLR thru (male front / female back)
- 1 x XLR thru (female front / male back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR Patchbay for Vocalists & Acoustic Players

Ormeau Carols 2025

Miguel Angel Antonio Martínez Fuentes

Das DC7 ist ein professionelles Schaltnetzteil mit einem bemerkenswert flachen Profil von nur einem Zoll, das speziell für die Montage unter Pedalboards mit geringer Bodenfreiheit entwickelt wurde. Es bietet sieben isolierte DC-Ausgänge, von denen jeder bis zu 660 mA bei 9 V liefert, wobei pro Ausgang vier wählbare Spannungen zur Verfügung stehen. Das Gerät verfügt über einen 5V-USB-Ausgang für Mobilgeräte und einen 24V-Zusatzanschluss zur Systemerweiterung mit Einheiten wie dem CIOKS 4 oder 8. Eine fortschrittliche mehrstufige Filterung gewährleistet einen extrem rauscharmen Betrieb, ideal für stromhungrige digitale und empfindliche analoge Effekte. Das Netzteil nutzt einen universellen Netzeingang, was den weltweiten Einsatz ohne externe Transformatoren ermöglicht.

The DC7 is a professional-grade switch-mode power supply featuring a remarkably slim one-inch profile designed for low-clearance pedalboard mounting. It provides seven isolated DC outlets, each capable of delivering up to 660mA at 9V, with four selectable voltages available per outlet. The unit includes a 5V USB output for mobile devices and a 24V auxiliary port for expanding the system with additional units like the CIOKS 4 or 8. Advanced multi-stage filtering ensures ultra-low noise operation, making it suitable for high-current digital and sensitive analog effects. The power supply utilizes a universal mains input, allowing for worldwide use without the need for external transformers.

CIOKS

Product Page

Review by Sound on Sound

Review by Guitar Chalk

DC 7

Paul De maio

Fortschrittliche MIDI-Fußcontroller-Funktionalität und umfangreiche Layout-Anpassungen zeichnen diese digitale Befehlsstation aus, die für eine umfassende Pedalboard- und Studiointegration entwickelt wurde. Die Architektur umfasst acht Soft-Touch-Fußschalter, die zusammen mit vier unabhängigen, hochauflösenden Farb-LCD-Displays arbeiten, die Banknamen, Preset-Informationen und Schalterzustände in Echtzeit anzeigen. Sie unterstützt die vollständige drahtlose Konnektivität über integriertes Bluetooth Low Energy MIDI neben physischen E/A-Anschlüssen wie traditionellen 5-Pin-DIN, umschaltbaren Typ A/B 3,5-mm-TRS und dualen USB-C-Host- und Device-Anschlüssen. Vier zuweisbare Omniports fungieren adaptiv als TRS-MIDI-Ausgänge, Expressions-Eingänge oder Aux-Schalter-Eingänge, während zwei dedizierte TRS-Relais-Anschlüsse eine direkte analoge Amp-Kanalumschaltung oder Temposteuereung ermöglichen. Die interne Verarbeitung unterstützt 128 separate Speicherbänke mit drei Seiten pro Bank, sodass Benutzer bis zu 32 gleichzeitige MIDI-Befehle pro Fußschalteraktion koordinieren können.

Advanced MIDI foot controller functionality and extensive layout customization define this digital command station designed for comprehensive pedalboard and studio integration. The architecture incorporates eight soft-touch foot switches operating alongside four independent high-definition color LCD displays that present real-time bank names, preset information, and switch states. It supports full wireless connectivity via integrated Bluetooth Low Energy MIDI alongside physical I/O ports including traditional 5-pin DIN, switchable Type A/B 3.5mm TRS, and dual USB-C host and device connectors. Four assignable Omniports function adaptively as TRS MIDI outputs, expression inputs, or auxiliary switch inputs, while dual dedicated TRS relay ports facilitate direct analog amp channel switching or tempo control. Internal processing supports 128 distinct memory banks containing three pages per bank, allowing users to coordinate up to 32 simultaneous MIDI messages per foot switch action.

Morningstar Engineering

Demo by Scott Uhl

Manual

MC8 Pro

Tester

The micro-Thumpinator is a bandwidth optimizer designed for bass guitar. It removes the low frequency signals that are outside the range of notes produced by the instrument.

Infrasonic frequencies cannot be reproduced by standard bass cabinets but they often make amplifiers clip, especially when they are set to boost the lower frequencies. The Thumpinator filters the signal content optimising the energy delivered by the amplifier. Low-frequency clip is substantially reduced and the sound is tighter especially at high volume levels.

The micro-Thumpinator accepts instrument and line level signals. It can be used between preamplifier and amplifier, between bass and amplifier or anywhere in the effect chain (line or instrument level). It can also be connected directly to an audio interface.

SFX Sound

Review by Talk Bass.com

Demo by Paul Reich

Official Product Video

micro-Thumpinator v2

ch ray

Line 6 HX Stomp ist ein professioneller Gitarrenprozessor, der den Klang von Helix-Verstärkern, -Boxen und -Effekten in einem ultrakompakten Pedal liefert. Egal, ob Sie lieber ein traditionelles Amp-and-Pedal-Setup spielen oder direkt auf die Bühne oder ins Studio gehen, HX Stomp lässt sich nahtlos in eine Vielzahl von Umgebungen und Anwendungen integrieren. Das HX Stomp-Gitarrenpedal verwendet dieselbe DSP- und HX-Modellierungstechnologie wie seine größeren Helix-Brüder und passt dennoch problemlos auf Ihr Pedalboard oder sogar in die Tasche Ihres Gigbags. Es gibt über 300 Ampere, Kabinen und Effekte – einschließlich eines Loopers. HX Stomp enthält dieselben HX-Modelle wie die Produkte der Helix-Familie sowie die Legacy-Effektbibliothek der Line 6 M-Series-Pedale und Stompbox-Modellierer wie den DL4. Verwenden Sie es als "Super-Stompbox", als Backup- oder Travel-Rig, als zusätzlichen Tonexpander in Kombination mit anderen Modellierern, als Audio-Interface - oder sogar als komplettes Gitarren- oder Bass-Rig.

Line 6 have been at the forefront of the digital modelling world for over 20 years now, pushing the boundaries of guitar technology is nothing new for them and their flagship product, the Helix, has taken the guitar world by storm. With the scaled down Helix, the HX, becoming a go to for players, its latest version, the HX Stomp is sure to generate loads of interest!

The HX Stomp is the ultimate streamlined version of this superstar pedal. Constructed as a 3 pedal unit, the HX Stomp features the same processor as the Helix, meaning you get over 300 effects including legacy lines from the M Series, 8 simultaneous amp, cab and effects blocks, TRS dual expression pedal inputs and a stereo effects loop, it's a serious pedal!

It's super comprehensive but really user intuitive. Built with the working player in mind, it has a solid aluminium construction that can take the rigours of the road, perfect on stage or in the studio, the Helix is the future of multi effects.

LINE 6

Review by musicradar

Review by bonedo

Review by Gitarre & Bass

Demo by Guitar Bonedo

Demo by Bernd Kiltz - Gitarrenvideos

HX Stomp Black

PedalSafe Type L6

QuickMount Type L6

Pedal-Montageplatte für LINE6 HX Stomp Pedale

Pedal Mounting Plate for LINE6 HX Stomp pedals

Schutzabdeckung & RockBoard-Montageplatte für LINE6 HX Stomp Pedale

Protective Cover & RockBoard Mounting Plate For LINE6 HX Stomp pedals

Schutzabdeckung & universelle Montageplatte für LINE6 HX Stomp Pedale

Protective Cover & Universal Mounting Plate For LINE6 HX Stomp pedals

Roberto Gonzalez Lozano

2-Channel Line Isolation Box for DSP Guitar rigs or Percussion pads with XLR Polarity Reverse switch and Summing on 1/4″ & XLR outs.

Pinstripe Pedals

Demo by Worship Gear Collective

DISO+ DLX

Der Source Audio C4 Synth kombiniert alle Sound Construction Tools eines klassischen Eurorack Modular-Synthesizers in einem kompakten, einfach zu nutzenden Effektpedal für Gitarre und Bass. Grundlegend handelt es sich bei dem C4 um ein Modular Synth, der vor allem durch ein beispiellos akkurates Tracking, extrem schnelle Reaktionen und fast unendliche Sound-Möglichkeiten überzeugt. 

Für eine einfache Plug-And-Play Anwendung kommt das Pedal mit sechs wählbaren Presets, die sich über den Toggle Switch auswählen lassen. Über einen MIDI-Controller lassen sich außerdem die 128 Factory Presets auswählen. In Kombination mit dem kostenlosen Neuro Desktop Editor oder der ebenfalls kostenlosen Neuro Mobile App erkennt man erst das eigentliche Potential des Pedals. Über die Software hat man Zugriff auf einen Editor, der sich an Euroracks orientiert und 4 parallele Voices, 3 Oszillator-Wellenformen, 11 Envelope Follower, 24 modulierende Filter, Distortion, Tremolo, Pitch Shifting, einen intelligenten Harmonizer, programmierbares Sequencing und mehr bietet. Von klassischen Synthie-Tones bis zu allen Sounds, die du dir jemals vorstellen konntest - der C4 Synth macht es möglich!

The Source Audio C4 Synth unites all the sound construction tools of a classic Eurorack modular synthesizer and packages them in a compact and easy-to-use effects pedal for guitar or bass. It is essentially a modular synth in a box with unprecedented tracking abilities, lightning-fast response, and vast universe of easy-to-access sound options.

The C4 offers multiple methods of preset storage and recall. For a straightforward plug-and-play experience, simply select one of the pedal’s six onboard presets with the center toggle switch. The addition of a third-party MIDI controller with USB host provides access to any of the C4 Synth’s 128 Factory presets. Connect the C4 to the Neuro Desktop Editor (a free download for Mac and Windows) or the Neuro Mobile App (iOS and Android) and unlock the pedal’s true power. The Neuro software features a Eurorack inspired editing interface with 4 parallel voices, 3 oscillator wave shapes, 11 envelope followers, 24 modulating filters, distortion, tremolo, pitch shifting, intelligent harmonization, programmable sequencing, and more. Use the editor to create anything from classic synth tones to the sounds you've imagined, but never actually heard. Finally, for a world of great tones without all the tweaking, download sounds from the ever-expanding collection of published presets created by the C4 Neuro Community.

Once you’ve found your sound, burn it directly to the pedal in any of the C4 Synth’s 128 preset positions, save it to your own personal effects library, or share it with the rest of the C4 Neuro Community. Never before has a guitar synth pedal offered so much is such a small package.

Source Audio

Official Product Page

Source Audio SA 249 - One Series C4 Synth - Demo Video (No Talking) - Guitar Bonedo

Source Audio SA 249 - One Series C4 Synth - Demo Video - Mike Hermans

Source Audio SA 249 - One Series C4 Synth - Bass Demo - Nathan Navarro

Source Audio SA 249 - One Series C4 Synth - Bass Demo - The Bass Channel

Source Audio Spectrum Intelligent Filter & C4 Synth - Review by Gitarre&Bass [DE], [01-2020]

Source Audio C4 Synth - Review by GrandGtrs [DE], [01-2020]

Source Audio C4 Synth - Review by Bonedo [DE], [12-2019]

Source Audio C4 Synth - Review by TopGuitar [PL], [11-2019]

Source Audio C4 Synth - Review by PremierGuitar [EN], [10-2019]

Source Audio SA 249 - One Series C4 Synth - Review by TopGuitar [PL], [08-2019]

SA 249 One Series C4 Synth

Das Empress Effects Bass ParaEq ist ein hochwertiges analoges parametrisches Equalizer- und Boost-Pedal, das speziell für Bassisten entwickelt wurde, die präzise Klangkontrolle suchen. Es verfügt über drei vollständig einstellbare parametrische EQ-Bänder mit variabler Q und ermöglicht eine Anhebung oder Absenkung von ±15 dB. Das Pedal beinhaltet Hochpass-, Tiefpass-, Tiefen- und Höhen-Shelving-Filter, die umfassende Frequenzformungsmöglichkeiten bieten. Ein fußschaltbarer Boost bietet bis zu 30 dB sauberen Gain, und das Pedal arbeitet intern mit 27V für außergewöhnlichen Headroom. Weitere Funktionen sind ein wählbarer 10MΩ Hi-Z-Eingang für Piezo-Tonabnehmer und ein automatisch erkennender symmetrischer Ausgang, was es sowohl für Live- als auch Studioanwendungen geeignet macht.

The Empress Bass ParaEq is the only parametric EQ pedal on the market built from the ground up for bass. It gives players studio-grade tone shaping in a compact pedal format that is purpose-built for low-end instruments, not just adapted from guitar gear.

Following the success of our Bass Compressor—and after hearing from countless players who were already using the ParaEq MKII Deluxe on bass—we knew it was time to give bassists more than a “good enough” EQ. The Bass ParaEq delivers the same transparent, tone-sweetening power that made the Deluxe a favourite, but with frequency ranges, filters, and features tailored specifically for bass.

With a dynamic low shelf, bass-tuned EQ bands, a Hi-Z input for upright players, and an auto-detecting balanced output, it’s built to give bassists the control they’ve always deserved—on stage, in the studio, everywhere.

Empress Effects

Review by TGT11

Review by Bass Gear Magazine

Demo by Happy Mag

Demo by Tim Lefebvre

Bass ParaEQ

QuickMount Type B1

Pedal-Montageplatte für FRIEDMAN, KEELEY Halo, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD, Jupiter V2 und Mooer GL 100 Pedale

Pedal Mounting Plate for FRIEDMAN, KEELEY Halo, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD, Jupiter V2 and Mooer GL 100 pedals

Nathan Rapheld

Seit über 75 Jahren vertrauen einige der größten Namen auf der Bühne und im Studio auf Peterson als Maßstab in Sachen Stimmpräzision. Der StroboStomp Mini™ bietet die unübertroffene Stimmgenauigkeit von 0,1 Cent aller authentischen Peterson Strobe Tuner im Format eines Mini-Pedaltuners. Mit einem hochauflösenden LCD-Strobe-Display mit variabler LED-Farbhintergrundbeleuchtung klingen Ihre Instrumente nie besser gestimmt. Ein True-Bypass-Modus ohne Knackgeräusche und ein gepufferter Ausgabemodus geben Ihnen die Kontrolle über Ihren kostbaren Klang ohne Kompromisse. Mit über 80 exklusiven Sweetened Tunings® und Guided Tunings an Bord können Sie Ihren Sound einstellen und stimmen wie die Profis!

For over 75 years, Peterson has been trusted by some of the biggest names on stage and in the studio as the standard in tuning precision. The StroboStomp Mini™ delivers the unmatched 0.1 cent tuning accuracy of all authentic Peterson Strobe Tuners in a mini pedal tuner format. Featuring a high-definition LCD strobe display with variable LED color backlight, your instruments will never sound more in tune. A pop-less true bypass mode and a buffered output mode place you in command of your precious tone without compromise. With over 80 exclusive Sweetened Tunings® and Guided Tunings on-board, you'll be able to dial in your sound and tune like the pros!

Peterson

Review by reddit /guitarpedals

Review by guitar pedal X

Quick Start Guide

Demo by The Time Preservation Society

Strobostomp Mini

Robert Ossenkopp

More is More. It sounds big, warm, and punchy. It doesn’t have tone controls because it doesn’t need them, the single knob controls the overall output volume. It wasn’t designed to replace anything else, just to give you More. It’s hard to really describe the sound, because it wasn’t designed to have an overwhelming sound, but moreso to compliment the sound you already have. It wasn’t designed to be a great rig by itself, but it was designed to take your great rig and make it More.

sushiboxfx

Demo by  jbybj

More

Alex  Wilkins

When we released our original Compressor back in 2011, it quickly became a favourite among guitar and bass players alike who were searching for something more than the typical oversimplified controls found on most compressor pedals. Although our original Compressor sounded great on bass (and still does!) we set out to do even better. 
On top of the full range of features and controls normally only seen in high end studio equipment, such as input and gain reduction metering, independent attack and release controls, a mix knob for parallel compression, and an external sidechain insert, we’ve now added a fully variable sidechain high pass filter, and a two position ‘tone + colour’ circuit which adds gentle tone sculpting and harmonic distortion, giving your bass some delicious character.  

Review by bassic

Review by CompressorPedalReviews

Demo by Pertybass

Demo by BassTheWorld.com

Bass Compressor Blue Sparkle

29 Pedals

Review by The Gear Page

Review by American Songriter

Demo by Rabea Massaad

EUNA

Für 7-12 FX-Pedale, 1 MOD-Slot - **598 x 236 mm / 23.54" x 9.29"** - erhältlich mit Gig Bag oder Flight Case

For 7 - 12 FX pedals, 1 MOD slot - **598 x 236 mm / 23.54" x 9.29"** - available with Gig Bag or Flight Case

Quincy Berman

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 1 V2 ist eine Pass-Through-Box, die speziell für Gitarristen und Bassisten entwickelt wurde. Du kannst das MOD 1 V2 nutzen um mehrere Pedale deines Setups im Front End und im Effekt-Loop des Verstärkers zu postieren (4-Kabel Methode) oder die vier TRS-Anschlüsse als zentralen Zugang und Ausgang des Boards nutzen. Die XLR-Through-Verbindung kann als Signalausgang vom Pedalboard zum Mischpult oder zur PA verwendet werden.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 5 x 6,3 mm TRS thru
- 1 x XLR thru (männlich vorne / weiblich hinten)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 5 x 6,3 mm / ¼" TRS thru
- 1 x XLR thru (male front / female back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR, IEC & Barrel Patchbay

Q's Bass Board Wet Dream

Logan Norcliffe

Er ist ein zurückhaltender Zeitgenosse, der so gut wie nie Interviews gibt. Doch stille Wasser sind bekanntlich tief. Und wenn TOOL-Bassist Justin Chancellor seinen exklusiven Wal-Bass umschnallt und seine komplexen Basslines mit diesem einzigartigen Sound anstimmt, dann spricht er Bände.

The Justin Chancellor Cry Baby Wah is a multi-tool of sonic craftsmanship, combining three separate effects into a single pedal: the fluid expressiveness of a custom midrange filter, the bright aggression of a custom wah circuit, and the chainsaw grind of a vintage fuzz. It's the perfect complement to bass player Justin Chancellor's multi-dimensional role in the band Tool. Whether opening up soundscapes with chords and harmonics or syncing up with guitarist Adam Jones to perform arresting single-note unison runs, Justin goes above and beyond the traditional boundaries of his instrument to help compose the band's multi-layered tunes. He is, without a doubt, one of the modern pioneer users of effects on bass, and he keeps a carefully configured pedalboard at his disposal for crafting tones and exploring sounds. This custom Cry Baby Wah combines some of his favorite ways to do just that—filter, wah, and fuzz.

Dunlop

Demo by Nate Navarro

Demo by BassTheWorld 

Demo by The Bass Channel

Review by GASS MAGAZINE

Review by GUITAR World 

Review by GEARNEWS 

JCT95 Justin Chancellor Cry Baby Wah

QuickMount Type M

Pedal-Montageplatte für Dunlop Cry Baby Wah-Pedale

Pedal Mounting Plates For Dunlop Cry Baby Wah Pedals

Mattia Porcai

The Underground Accelerator is the successor to both Particle Accelerator and London Underground.

Neither were perfect, but both had strengths that the other didn’t so, Underground Accelerator takes the best of both into one glorious preamp. It follows the same general structure of the London Underground, letting it get a little more grit than Particle Accelerator, but still keeping the deep low end that London Underground lacked.

It sounds great as a clean boost or mild overdrive on guitar, but bass is where it really sings, providing the rich bottom end missing in so many bass pedals.

*The newest version of the Underground Accelerator has an EQ bypass switch. Note that the main purpose of the EQ Bypass is to boost the gain of the pedal, and bypassing the EQ will produce approximately +30dB more gain. Passive EQs like the one used in Underground Accelerator are inherently lossy, so the bypass was added for those that want more gain and don’t need the use of the EQ. If you simply want a flat response without the gain boost, you can set Treble and Bass to minimum and Mids to maximum.

Undeground Accelerator

Antony Douch

Fusing classic BOSS octave tones with the latest tracking technologies, the BOSS OC-5 sets a new standard in octave pedal performance. Vintage mode provides a spot-on recreation of the legendary mono OC-2 from 1982, while Poly mode offers numerous enhancements for extended-range playing. And with the addition of an octave-up feature, a span of three octaves is now available for creative exploration. From fat, low mono sounds to octave-shifted chords and more, the OC-5 delivers the widest range, finest sound quality, and best playability in any octave stomp to date.

BOSS

Review by Six String Sensei

Review by Guitar World

Demo by  Pepe Music

OC-5

PedalSafe Type E1

QuickMount Type E

Pedal-Montageplatte für Standard-Boss-Pedale

Pedal Mounting Plate For Standard Boss Pedals

Schutzabdeckung & RockBoard-Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & RockBoard Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Schutzabdeckung & universelle Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & Universal Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Matthew Peters

Finally is my basic take on a tube D.I. It takes your unbalanced guitar input and feeds it through a high-voltage tube preamp then out through a high-end DI transformer and out into a balanced XLR output. You also have a 1/4″ output up top, and you can switch between dry passthrough from the input or affected output from the preamp for the 1/4″ output.

Demo by Serek Basses

finally

Origin Effects

Cali76 STD

Kastle Abbott

Der RockBoard ISO Power Block V16 ist ein Multi-Netzteil für Effektgeräte und bietet 16 galvanisch getrennte, hochgradig gefilterte Stromanschlüsse zur getrennten Stromversorgung von bis zu 15 Effektpedalen ohne Nebengeräusche, sowie zum Laden von USB Geräten. Die fortschrittliche Filtertechnologie der Power Slots verhindert wirksam hochfrequente Nebengeräusche. Durch die separate Kurzschlusssicherung für die Power Slots werden die angeschlossenen Effektpedale im Falle eines Kurzschlusses vor Beschädigungen geschützt. Separate LEDs zeigen Kurzschlüsse für jeden Anschluss separat an. Kommt es zu einem Kurzschluss wird lediglich der betroffene Power Slot ausgeschaltet, so dass der reibungslose Betrieb des Effekt-Rigs weiterhin gewährleistet ist.

The RockBoard ISO Power Block V16 is a multi-power supply for effects pedals with 16 isolated transformers and highly filtered power slots, designed for powering up to 15 effects pedals simultaneously without any noise and charging USB devices. The advanced filtering technology used in each of the power slots prevents high frequency noise. Built with individual slot short circuit protection, connected effects pedals are protected in case of a short circuit. With a designated LED for each power slot indicating the slot is working correctly, you can quickly identify any problems without losing power to the rest of your rig.

RockBoard

RockBoard - ISO Power Block V16 - Official video by RockBoard

Pedal Board Online Configurator

ISO Power Block V16

DITTO LOOPER is the looper you will try once and love for life – and you’ve gotta try it. We’ve built onto all that is good about the best loopers, trimmed all the nonessential, mood-killing tech hoopla, and designed a 5-minute looper that is intuitive, tons of fun, sounds great – and won’t break the bank!

TC Electronic

Review by Gustavo Pereira, guitarspace.org

Review by Mudskipper, bassic.de

Demo by Sweetwater

Demo by Aaron Short Music

Ditto Looper

QuickMount Type L

Pedal-Montageplatte für Standard-Mini-Pedale

Pedal Mounting Plate For Standard Mini Pedals

Giordano Rivolta

Electro-Harmonix

Pico Deep Freeze

PedalSafe Type L

Schutzabdeckung & RockBoard-Montageplatte für MXR, PIGTRONIX, XOTIC, XVIVE und viele weitere Pedale mit Mini Gehäusen

Protective Cover & RockBoard Mounting Plate For MXR, PIGTRONIX , XOTIC, XVIVE and many other effect pedals in mini enclosures 

Schutzabdeckung & universelle Montageplatte für MXR, PIGTRONIX, XOTIC, XVIVE und viele weitere Pedale mit Mini Gehäusen

Protective Cover & Universal Mounting Plate For MXR, PIGTRONIX , XOTIC, XVIVE and many other effect pedals in mini enclosures 

Der MXR Reverb liefert sechs verschiedene, High-End Reverb Styles in einer MXR-Stompbox in Standardgröße mit 3 Reglern. Dieses digitale Reverb bietet einen komplett analogen Hi-Fi Dry Path mit massiven 20 Volt Headroom dank der verbauten Constant Headroom Technology™. Jeder Reverb Style ist so detailreich wie in Top-Qualitäts-Rack Einheiten oder Plug-ins.
Der Reverb auch bietet einen 100% Wet Modus, stereo In- und Output und True Relay sowie Trails Bypass.
Drücke einfach den Tone Knob und wandere durch die entstehenden Reverb Landschaften.

Verbinde den MXR Reverb mit einem Expression Pedal um zwischen zwei Settings zu blenden.

The MXR Reverb delivers six distinct high end reverb styles, each exquisitely crafted and tuned by the award-winning MXR design team. It all comes in a standard-sized MXR box with a simple three-knob setup and a hi-fi analog dry path with a massive 20 volts of headroom thanks to Constant Headroom Technology™. The Reverb includes 100% wet mode, stereo input and output capability, and true relay or trails bypass. Each reverb style is as richly detailed as any found in the highest-end rack units and plug-ins, and all you have to do to step through them is push the Tone knob.

Connect a Dunlop DVP series volume/expression pedal to the expression jack to toggle and blend between two different knob setting configurations.

MXR M300 Reverb

MXR Reverb - Basic Sights & Sounds

MXR Reverb - Review

MXR M300 Reverb & Neunaber Immerse Reverberator Comparison Demo by That Pedal Show

Demo by ProGuitarShopDemos

Review by Premier Guitar

Gitarre & Bass Review - DE

Review by guitar.com

M300 Reverb

QuickMount Type A

Pedal-Montageplatte für Standard-Einzelpedale

Pedal Mounting Plate For Standard Single Pedals

The Orbital Modulator is a super-compact, durable, and highly flexible multi-effects pedal with a dynamic collection of precision-engineered phaser, flanger, chorus, and tremolo effects. The Orbital's twelve effect types, nine adjustable parameters, plus internal or external modulation control were designed to send your tone into sonic orbit.

SOUNDBLOX 2 ORBITAL MODULATOR

User Manual 

Source Audio Orbital Modulator

Soundblox 2 Orbital Modulator

The MXR Bass Envelope Filter delivers classic analog envelope filter sounds in an easy-to-use and compact pedal designed specifically for bass. Separate Dry and Effect controls let you dial in the perfect mix of effected and direct signals, so you can bring the funk without losing the low end. Its wide range of filter tones can be shaped with the Decay and Q controls, and a simple twist of the Sensitivity knob can tailor the pedal for your attack—as well as adjust for passive or active basses. The Bass Envelope Filter's power supply circuitry is designed to withstand over-voltage or polarity mishaps, and its true-bypass switching preserves your tone in bypass mode. It's all packaged in a durable, lightweight, Phase 90-size aluminum housing for the ultimate in portability and pedalboard space-saving dimensions.

Demo by The Bass Chanel

Demo by Bass Whisperer TV

M82 Bass Envelope Filter

Ciara Marshall

Discover 'The Pedal of Doom,' a meticulously crafted bass distortion pedal born from 18 months of passionate internal discussions and inspired by the legendary Geezer Butler. At its core, this pedal revolves around the power of EQ control. With an active 5-band EQ and the ability to shape your drive's pre-EQ, you have the freedom to sculpt two distinct tones, each with its individual character and harmonics.
 
Geezer Butler's influence is palpable in every detail, from the groove of 'Hand of Doom' to the transformative qualities of his music. 'The Pedal of Doom' allows you to capture that spirit, giving you the control to punch in those rich harmonics precisely when you need them. This pedal is your key to summoning the sound of doom at a moment's notice.

Ashdown

Geezer Butler Pedal of Doom

Das StroboStomp HD verfügt über das größte Stimmdisplay, das Peterson Tuners je in eines seiner Pedal-Stimmgeräte integriert hat, und besticht durch einen hochauflösenden LCD-Bildschirm mit einer LED-Hintergrundbeleuchtung in variablen Farben. Die vom Benutzer wählbaren Farben können genutzt werden, um das Stimmgerät individuell anzupassen oder die Ablesbarkeit des Displays je nach Einsatzumgebung bei unterschiedlichen Lichtverhältnissen zu verbessern. Die leuchtenden Bildschirmfarben können zudem Standard- oder Benutzer-Presets zugewiesen werden, um die Zeit für die Menüführung deutlich zu verkürzen und die Sicherheit beim Stimmen auf der Bühne zu erhöhen.

Featuring the largest tuning display Peterson Tuners has ever incorporated into one of their pedal tuners, the StroboStomp HD boasts a high-definition, LCD screen that incorporates a variable color LED backlight. The user-selectable colors can be used to personalize the tuner or to increase display viewing quality in different levels of ambient lighting depending on the usage environment. The vibrant screen colors can also be assigned to stock or user presets to significantly reduce menu navigation time and increase on-stage tuning confidence at the gig.

StroboStomp HD

Learn more about sushiboxfx More booster pedal on PedalPedia - the most comprehensive online resource for effect pedals ▶️ Official specs, manuals, product videos and more

More by sushiboxfx | RockBoard | PedalPedia