sank bunmanang

Lightweight 

Tester

The Timmy pedal has always been known for it's ability to provide a transparent overdrive to your amplifier while retaining the amps original tone. It's a fairly common thing for an overdrive to color tone, so why invest in a $1500 plus amp only to change it's inherent sound, right?

At low settings you will be able to effortlessly achieve a sound that is simply "more" of what your amp already offers. As the gain is turned up, and the pedal's EQ adjusted accordingly, smooth, singing, round and reedy tones are at your fingertips.

The Timmy pedal's responsiveness is exactly like that of a great, tube amplifier in that it responds immediately to your right hand's attack.

The Paul Cochrane Timmy is absolutely a legend in the world of overdrive pedals, and has been copied to a large degree over the years by several knock offs. 

Paul Cochrane

Demo by Mass Street Music

Demo by Living Room GD

Timmy v3

Das TC Electronic Plethora X5 der dänischen Effektschmiede vereint die Vorzüge der beliebten hauseigenen Toneprint-Pedale mit der Praktikabilität einer vollen Multieffekteinheit. Das Pedalboard kommt dabei in sehr handlichen Maßen, bietet fünf zuweisbare Slots für die TC-Effektpedale mit bis zu 75 Toneprints und kann sogar durch die Vier-Kabel-Methode mit einem Amp eingesetzt werden.

The TC Electronic Plethora X5 from the Danish effects manufacturer combines the advantages of the popular in-house Toneprint pedals with the practicality of a full multi-effects unit. The pedalboard comes in very handy dimensions, offers five assignable slots for the TC effect pedals with up to 75 Toneprints and can even be used with an amp through the four-cable method.

TC Electronic

Review by reddit /guitarpedals

Review by bonedo

Manual

Product Page

Demo by SweetWater

Demo by Riffs, Beard & Gear 

PLETHORA X5

Suhr

Riot Reloaded

QuickMount Type A

Pedal-Montageplatte für Standard-Einzelpedale

Pedal Mounting Plate For Standard Single Pedals

Für 4-7 FX-Pedale - **470 x 142 mm / 18.50" x 5.59"** - erhältlich mit Gig Bag oder Flight Case

For 4 - 7 FX pedals - **470 x 142 mm / 18.50" x 5.59"** - available with Gig Bag or Flight Case

Christopher Kang

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 1 V2 ist eine Pass-Through-Box, die speziell für Gitarristen und Bassisten entwickelt wurde. Du kannst das MOD 1 V2 nutzen um mehrere Pedale deines Setups im Front End und im Effekt-Loop des Verstärkers zu postieren (4-Kabel Methode) oder die vier TRS-Anschlüsse als zentralen Zugang und Ausgang des Boards nutzen. Die XLR-Through-Verbindung kann als Signalausgang vom Pedalboard zum Mischpult oder zur PA verwendet werden.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 5 x 6,3 mm TRS thru
- 1 x XLR thru (männlich vorne / weiblich hinten)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 5 x 6,3 mm / ¼" TRS thru
- 1 x XLR thru (male front / female back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR, IEC & Barrel Patchbay

My Board Gen. 3

Designed as the ultimate tone shaping tool for a player’s pedalboard, the PRISM is a buffer, boost, preamp, EQ and overdrive all in one beautiful and compact stainless steel enclosure!

Jackson Audio

Review by Premier Guitar

Review by AMAZONA

Demo by Jackson Audio Mateus Asato

Demo by Premier Guitar

Official Product Video

Prism

Das EHX East River Drive ist ein Pedal mit JRC4558-IC, so kühn wie New York City selbst. Die symmetrische Overdrive-Schaltung verleiht Biss und Gain, ohne den Klang zu verfärben. Mit Volume und Drive geht es von sanft bis schneidend, während der Tone-Regler genau die richtige Portion Durchsetzungskraft liefert. Egal, wie stark du es antreibst – du behältst stets die Kontrolle. True Bypass und ein kompromisslos guter Sound zu einem musikfreundlichen Preis!

The EHX East River Drive is a JRC4558 IC based pedal that’s as bold as New York City. Symmetrical overdrive adds edge and gain without compromising tone. Volume and Drive take it from sweet to searing while Tone lets you dial in just the right amount of bite to cut through the mix. No matter how hard you drive it, you’re always in control. True bypass and tone that is absolutely unflinching at a musician-friendly price!

Electro-Harmonix

Review by 

Demo by 

East River Drive

PedalSafe Type A1.1

Schutzabdeckung & RockBoard-Montageplatte für MXR® Standardgröße und Dunlop® Echoplex Delay Pedale

Protective Cover & RockBoard Mounting Plate For MXR® standard size and Dunlop® Echoplex Delay pedals

Schutzabdeckung & universelle Montageplatte für MXR® Standardgröße und Dunlop® Echoplex Delay Pedale

Protective Cover & Universal Mounting Plate For MXR® standard size and Dunlop® Echoplex Delay pedals

David Litaba

SINGLE EXPRESSION PEDAL

QuickMount Type M

Pedal-Montageplatte für Dunlop Cry Baby Wah-Pedale

Pedal Mounting Plates For Dunlop Cry Baby Wah Pedals

Whammy effects in a single stompbox pedal
7 pitch intervals shift across a 4 octave range

DigiTech

Review by musicradar

Demo by ProGuitarShopDemos

Whammy Ricochet

One of the most sought-after dual overdrive pedals produced in the mid '90s is now in one unique pedal design-with a pocket size. NUX Horseman pays homage to the legendary Centaur pedal. There are 3 dials for primary settings and 2 modes: Gold and Silver, and it offers massive headway usually requiring an 18v input.

Demo by TheToneLunch

Horseman

Mooer Audio stellt den perfekten Kompromiss für diejenigen vor, die eine hochwertige IR-Unterstützung mit Tone Capture Amp-Sampling benötigen - den GE250! Der GE250 Multi-Effekt Prozessor wurde komplett überarbeitet und verfügt über ein komplett weißes Gehäuse mit leicht lesbarem, schwarzen Text und ein ausgefallenes, neues Expression-Pedal-Design für eine verbesserte Haltbarkeit. Die Funktionalität wird auch für professionelle Gitarristen erweitert, da der GE250 mit einer Vielzahl von Input- / Output-Optionen ausgestattet ist und mit einem Fußschalter-Setup für zusätzliche Anpassungen und die Steuerung des Geräts kommt, das sich am Mooer GE300 orientiert. An Verstärkern und Effekten sind 70 hochwertige Amp-Simulationen sowie 32 verschiedene Cabinet-Simulationen (IRs) enthalten, die den Klang und das Gefühl eines echten Röhrenverstärkers emulieren. Die beliebte Unterstützung für Impulse Responses von Drittanbietern wurde jetzt auf die Unterstützung von Dateien mit jeweils 2048 Abtastpunkten erweitert, sodass mehr Optionen für die Suche nach dem perfekten Ton zur Verfügung stehen. Das GE250 verfügt außerdem über Standardfunktionen wie einen Tuner, 60 brandneue Drum-Tracks, 10 Metronom-Optionen, einen Phrase Looper (Stereo) mit 70 Sekunden Aufnahmezeit, einen AUX Input sowie einen programmierbaren Fußschalter und natürlich vorinstallierte Presets für diejenigen, die ihre eigenen Sound nicht von Grund auf neu gestalten wollen.

Mooer Audio introduces the perfect compromise for those that need high-quality IR support with a bit of Tone Capture amp-sampling fun - the GE250! The GE250 multi-effects processor is fully redesigned with easy to read black text on an all-white body while sporting a fancy new expression pedal design for added durability. Functionality is also expanded for the professional guitarist as the GE250 comes with a host of I/O options as well as a footswitch setup similar to the Mooer GE300 for added customization and control. On the amps and effects front, 70 high-quality Mooer amp models are included as are 32 IR-based factory speaker cab models designed to emulate the sound and feel of a real tube amplifier. The user-favorite support for third-party impulse response files has now been upgraded to support files of 2048 sampling points each, allowing for more options in the quest for the perfect tone. Finally, the GE250 also includes standard features such as a built-in tuner, 60 brand-new drum tracks, 10 metronome options, 70-second capacity looper, AUX audio input as well as a programmable footswitch and of course pre-loaded presets for those that don't want to build their own sound from scratch.

MOOER

Mooer GE250 - Official Demo Video

Tutorial | MOOER Pedal Firmware Update & Trouble Shooting | + Fixing the 'Black Screen' Issue - W-Music Distribution

Mooer GE250 and GE Labs - Demo / Shootout Video - Taylor Danley

Mooer GE250 - Demo Video (No Talking) - Guitar Bonedo

Mooer GE250 - Demo Video (Looper) - Musiker TV

Mooer GE250 - Review by Gitarre&Bass [DE], [08-2020]

Mooer GE250 - Review by Gitarzysta [PL], [03-2020]

Review by Dimitri, amazona.de

Review by Thomas Dill, bonedo.de

GE250

The Warden ist ein analoges Kompressor-Pedal mit klassischer Opto-Elektronikschaltung in kompromissloser Studioqualität. Auch bei The Warden setzt EarthQuaker Devices auf High-Grade-Bauteile. The Warden ist ein dank seiner sechs Regelmöglichkeiten (Tone, Level, Sustain, Ratio, Attack und Release) äußerst vielseitig einstellbares Kompressor-Pedal. Von einer kaum wahrnehmbaren, aber wirkungsvollen Kompression bis hin zu heftig komprimierten Tönen mit schnellem Attack reicht das Spektrum von The Warden. Die 9V-Netzgerätespannung wird intern in 18V umgewandelt, was für erweiterten Headroom und gesteigerte Dynamik sorgt. Die Opto-elektronische Schaltung bewirkt eine charakterstarke Kompression und der Tone-Regler ermöglicht sowohl Treble-Boosts als auch Treble-Cuts. The Warden ist mit einem True Bypass ausgestattet und wird in Handarbeit in Ohio/USA hergestellt. Der Warden V2 verfügt über einen geräuschlosen, relais-basierten Soft-Touch Fußschalter. Audiosignale haben keinen Durchgang, wenn das Gerät nicht mit Strom versorgt wird.

The Warden is an analog, optical compressor with a feature set usually reserved for studio grade units. Like all EarthQuaker Devices pedals it is built only with high grade components. The Warden is, thanks to its six controls (Tone, Level, Sustain, Ratio, Attack and Release), an extremely versatile and adjustable compressor pedal. The Warden will allow everything from a heavy squash with fast attack and release to barely there subtle compression. The 9V power supply voltage will be internally converted to 18V giving loads of headroom and extended dynamism. The optical electronic circuit delivers a compression with more character and the Tone control allows for treble boosts and cuts. The Warden is true bypass and handmade in Ohio/USA. The Warden V2 uses silent relay-based soft touch switching. Audio will not pass without power.

EarthQuaker Devices

Official Product Page

The Warden v2

QuickMount Type B

BOSS

DC-2W Dimension C (Waza Craft)

PedalSafe Type E1

QuickMount Type E

Pedal-Montageplatte für Standard-Boss-Pedale

Pedal Mounting Plate For Standard Boss Pedals

Schutzabdeckung & RockBoard-Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & RockBoard Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Schutzabdeckung & universelle Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & Universal Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

The OCD was the first pedal to use Mosfets as clipping devices. Another first was their configuration as "hard clippers connected to v-ref" instead of to ground, as was the norm. These things contribute greatly as to why the OCD has such touch-sensitivity...why they react so well when the strings are hit hard or soft, and why they sound & feel different than all other pedals out there, 90% of which are just slight tweaks of the Tube Screamer. 

Fulltone

Demo by That Pedal Show

Demo by intheblues

The Story of Fulltone OCD

PedalSafe Type FT1

QuickMount Type FT1

Pedal-Montageplatte für FULLTONE OCD & 69 MK2 Pedale

Pedal Mounting Plate for FULLTONE OCD & 69 MK2 pedals

Schutzabdeckung & RockBoard-Montageplatte für FULLTONE OCD & 69 MK2 Pedale

Protective Cover & RockBoard Mounting Plate For FULLTONE OCD & 69 MK2 pedals

Schutzabdeckung & universelle Montageplatte für FULLTONE OCD & 69 MK2 Pedale

Protective Cover & Universal Mounting Plate For FULLTONE OCD & 69 MK2 pedals

Für 7-12 FX-Pedale, 1 MOD-Slot - **470 x 330 mm / 18.50" x 12.99"** - erhältlich mit Gig Bag oder Flight Case

For 7 - 12 FX pedals, 1 MOD slot - **470 x 330 mm / 18.50" x 12.99"** - available with Gig Bag or Flight Case

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 3 V2 ist eine Patchbay für Sänger und Akustik-Musiker. Über die zwei XLR-Ausgänge kannst du ein Stereo-Signal von dein MOD senden und an den XLR-Eingang lässt sich ein Mikrofon anschließen. Mit drei TRS-Through-Verbindungen lässt sich das MOD 3 V2 außerdem als zentraler Zugang und Ausgang des Boards nutzen um zum Beispiel Effektpedale in den FX-Loop eines Verstärkers einzuschleifen.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 3 x 6,3 mm TRS thru
- 2 x XLR thru (männlich vorne / weiblich hinten)
- 1 x XLR thru (weiblich vorne / männlich hinten)
- 1 x DC 2,1 x 5,5 mm Hohlstecker thru
- 1 x AC IEC thru (männlich vorne / weiblich hinten)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel


The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 3 V2 is a pass-thru box designed for use by vocalists and acoustic players. The 2x XLR outputs allow you to send a stereo signal from your MOD and the 1x XLR input can be used to connect your microphone. You can also use it to run several pedals from your board through the effects loop of your amp, or simply use the MOD as a central access point to your pedalboard.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 3 x 6,3 mm / ¼" TRS thru
- 2 x XLR thru (male front / female back)
- 1 x XLR thru (female front / male back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR Patchbay for Vocalists & Acoustic Players

On the stage

Kick your playing into high gear with SPARK MINI BOOSTER, a stompbox-wonder for the initiated that features a completely clean boost with some serious tone enhancement under the hood once you really start cranking things.

With a full 20 dB of boost, SPARK MINI BOOSTER is a great clean booster. But that’s not all it does – keep turning that knob and it’ll start working its magic driving gear into peak performance! No matter what your style or set-up, this musical miracle will maximize your potential – but let your core tone shine through completely unaltered.

PrimeTime is a radical new feature that is exciting guitarists around the globe. Put simply, SPARK MINI BOOSTER instantly understands whether you want the pedal to be on permanently when you hit the footswitch, or just when you hold the footswitch down. Which totally rocks for both ‘always-on’ and ‘emphasizing passages’ situations.

By adding a discrete, fully analog circuit, SPARK MINI BOOSTER adds a purely magical sense of life and excitement to your gear and tone. Each part of the circuit is carefully selected, from transistor to capacitor and from resistor to diode. What does that mean? Sweet, pure tone in all of its glory in an unparalleled clarity with zero coloration. Whether you want to make things sing or roar, this circuit ensures to maximize your tone.

Review by Daniel Rettberg

Demo by Reverb

Spark Mini Booster

Auf den Namen HyperGravity hört das neue Multibandkompressor-Bodenpedal für Gitarristen aus dem Hause TC Electronic, dem man – um dynamisch auf dem Boden zu bleiben – den MD3 Kompressor-Algorithmus des Studiosystems 6000 des Herstellers spendiert hat.

HYPERGRAVITY COMPRESSOR is the missing link that will take your tone from good to great. Featuring no less than three amazing modes, HYPERGRAVITY COMPRESSOR includes a state-of-the-art multiband compressor, a cool vintage compressor, plus endless compression combinations through TonePrint.

Review by Music Radar 

Demo by Chords Of Orion 

Demo by TC Electronic 

HyperGravity Mini Compressor

Carrying on the POLYTUNE legacy, POLYTUNE 3 MINI packs an unprecedented amount of tuning power into a tiny footprint without sacrificing essential features, such as always-on mode and our audiophile BONAFIDE BUFFER circuit for uncompromised tones – making it ideal for fully-loaded pedal boards where every inch counts!

Review by AMAZONA 

Review by GUITAR World 

Review by bonedo 

Demo by Guitar World 

Polytune 3 Mini

MXR knows phasers. The Phase 90's compact size, superior construction, and refined sound put MXR on the map, and it set the standard by which all other phasers are judged. Two years later, MXR released the Phase 45—a mellower version of the effect favored for its ability to easily blend into a band's mix. Now, you can get both iconic circuits in a single pedal while tightening up your pedalboard at the same time. The Phase 95 combines the Phase 45 and Phase 90 circuits in a mini housing with about half the footprint of a standard MXR pedal. The 45/90 switch toggles between the Phase 45 mode's subtle two-stage phasing and the Phase 90 mode's more pronounced four-stage phasing, while the Script switch toggles between two phasing styles. The Phase 95 is set to modern style phasing by default, which relies on feedback to create light harmonic distortion and gives the effect a more accentuated swoosh. Engaging the Script switch removes feedback for a lusher, more subdued sound with higher headroom and greater clarity. The familiar Speed control sets the rate of the effect. The Phase 95 may be small, but it's full of rich phase tones, and it'll take a beating on the road.

Product Page 

Product Manual 

MXR Phase 95

M290 Phase 95

thuy nguyen

Official Website

CE-2

In setting out to design Brigadier, we decided to take a super-powerful SHARC DSP and dedicate all of its horsepower to doing one thing and one thing only—delivering the best analog bucket brigade sound ever. We’ve utilized every last drop of DSP power, allowing Brigadier to deliver every minute detail and nuance that makes analog delays special. Our hand crafted, processor-intense dBucket algorithm delivers all of the sonic complexities of analog bucket delays with none of the drawbacks. No stone has been left unturned.

Brigadier gives you all of the tone and none of the noise of regular old bucket brigade chips, unless of course you choose to add it back with our exclusive Bucket Loss control. Go from warm and clean repeats all the way to noisy, saturated delays. Couple that with dedicated modulation and filter controls, tap tempo, and assignable expression pedal input, and you have yourself a versatile delay powerhouse.


Strymon

User Manual 

Product Demo 

Brigadier

Flavio Salcuni

SIMPLIFIER MK-II ZERO WATT REVERB STEREO AMPLIFIER : The state-of-the-art in analog amp simulation

The Simplifier MK-II takes the analog amp simulation to a new stage of realism. Much more options, while keeping the instant touch and dynamics that only an all analog device can manage.
All, in the same ultra compact footprint...

DSM & Humboldt

Demo by DSM & Humboldt

Demo by Guitar Bonedo

Simplifier MK-II

Die magische Kombination aus Tremolo und Reverb ist das früheste Beispiel für eine perfekte Verbindung von Gitarreneffekten. Erstmals in legendären Verstärkern der 1960er Jahre eingesetzt, hat dieses harmonische Zusammenspiel unzählige Aufnahmen und Live-Performances geprägt – von frühem Surfrock, swampigem Bayou-Blues, Spaghetti-Western und Film-noir-Soundtracks bis hin zu modernem Indie-Rock. Auch heute entdecken Gitarrist:innen die inspirierende Kraft dieses Traumpaars immer wieder neu.

Flint ist ein Studio-Qualitäts-Effektpedal, das genau diese klassische Kombination liefert. Wir haben unsere Lieblings-Tremolo- und Reverb-Schaltungen aus der Vergangenheit intensiv analysiert, ihre klanglichen Feinheiten untersucht und sie in unseren aufwendig entwickelten Algorithmen detailgetreu nachgebildet. Flint ist im Grunde zwei Pedale in einem – Tremolo auf der einen, Reverb auf der anderen Seite.

The magical combination of tremolo and reverb is the earliest example of a perfect guitar effects marriage. First pioneered within historic amplifiers of the 1960s, this harmonious coexistence has made its way onto countless records and performances — from early surf, swampy bayou blues, spaghetti westerns and film noir soundtracks, to modern day indie rock. As music moves forward, guitarists continue rediscovering the inspiration provided by this perfect pair.

Flint is a studio-class effects pedal that delivers this classic combination. We carefully studied our favorite classic tremolo and reverb circuits, examined the sonic complexities and faithfully accounted for every detail in our hand-crafted algorithms. Flint is essentially two pedals in one, with tremolo on one half and reverb on the other.

Review by Amazona 

Review by Guitar.com

Review by Pedal of the Day

Review by Six String Sensei

Demo by Made by Miike

Audio Examples

Flint

PedalSafe Type J

QuickMount Type J

Pedal-Montageplatte für mittelgroße Strymon-Pedale

Pedal Mounting Plate For Medium Size Strymon Pedals

Schutzabdeckung & RockBoard-Montageplatte für STRYMON Medium Size Effektpedale

Protective Cover & RockBoard Mounting Plate For STRYMON medium size effect pedals

Schutzabdeckung & universelle Montageplatte für STRYMON Medium Size Effektpedale

Protective Cover & Universal Mounting Plate For STRYMON medium size effect pedals

Das Original Crybaby Pedal, das viele zeitlose Rocksounds erzeugte und unter anderem von Größen wie Jimi Hendrix, Eric Clapton, Buddy Guy, David Gilmour benutzt wurde.

When people talk about wah pedals, they're talking about the Crybaby. This is the original—the one that created some of the most timeless sounds in rock. Relied on by Jimi Hendrix, Eric Clapton, Buddy Guy, David Gilmour, and many other greats Features: Heavy die cast construction for years of reliability, 100K ohm Hot Potz potentiometer that allows for that quick, abrupt wah sound. Powered by the Dunlop ECB-003 AC Adapter and/or 9 volt battery.

Dunlop

Guitar World Demo

Demo by PMTVUK

CRY BABY STANDARD WAH (GCB95)

Teeratai Kaewmanee

The Empress buffer+ was designed to be the complete I/O interface for the pedal board, while maintaining the highest fidelity to your guitar's signal.

Signal loss due to long, un-buffered cable runs is an issue that has plagued guitar players for decades. The primary goal of the buffer+ is to eliminate this signal loss, ensuring that your tone is unchanged by your cables.

Additionally, all the connectivity of your pedal board is consolidated to make set up quick and easy. The buffer+ also has a very handy set of features that make life just a little better. Noise filters, input pads, switchable clean boost and input loading are all powerful tools available on the buffer+

Empress Effects

Demo by woodnstrings

Demo by Empress Effects

Review by Talk Bass.com

Review by Soren Reiff

Review by Bass Musician

Manual download

Buffer+

Für 9-15 FX-Pedale, 1 MOD-Slot - **622 x 330 mm / 24.49" x 12.99"** - erhältlich mit Gig Bag oder Flight Case

For 9 - 15 FX pedals, 1 MOD slot - **622 x 330 mm / 24.49" x 12.99"** - available with Gig Bag or Flight Case

Delio Inacio

Full Build

Lefry Leily Carvajal Novas

The Mosky BP Booster is an audio booster that provides up to +20dB of unadulterated boost with multi-dimensional, shimmering highs and lows, and no ear fatigue. It uses high-quality parts, a discrete FET design, and has low impedance output

Mosky

Demo by Choptones Official

Demo by omitsu

Review by The Gear Page

Review by reddit /basspedals

Review by Seymour Duncan Forum

BP Booster

Roger Thompson

Portable MIDI foot controller pedal is small and exquisite, with easy-to-use 4 foot switches.
Wireless MIDI pedal with intelligent APP(CubeSuite) control, easy to operate, convenient to use.
Bulit in 300mAh rechargeable lithium battery, charging for 2.5 hours, can be used for 12 hours.
The display screen can directly feedback the commands you issued, intuitive and clear.
Compatible with Wins, iOS, Android and other platforms.

M-VAVE

Demo by The Pedal Picassos

Demo by Ehrosmith TV

Chocolate

Pax vibes

Pocket Master ist ein kompakter Multieffektprozessor mit leistungsstarkem Schaltungsdesign und hochwertigen digitalen Effekten. Er enthält über 100 verschiedene Effekte, die für verschiedene Musiker geeignet sind. Egal, ob Sie E-Gitarre, Akustikgitarre, Bass oder sogar Keyboard usw. spielen, er kann Ihr Spiel attraktiver klingen lassen.

Pocket Master is a compact multi-effects processor with potent circuit design and high quality digital effects. It contains 100+ various effects suitable for different musicians, whether you play electric guitar, acoustic guitar, bass, even keyboard, etc., it can make your playing sound more attractive. 

Sonicake

Pocket Master

Riot Reloaded by Suhr