Lachlan Koumis

Jack White - The Raconteurs HUS 2019

Landon Wolf

The Magnatone 2-Button Footswitch is designed for hands-free operation, providing instant access to essential functions of compatible amplifiers like the Twilighter and Panoramic series. Built for durability, this footswitch allows musicians to control their sound seamlessly without needing to manually adjust the amp settings.

Magnatone

Product Page

2-button foot switch

ch ray

Der mxr Micro Amp addiert einen einstellbaren Boost zu dem Gitarrensignal. Er kann verwendet werden um Lead-Passagen anzuheben, um beim Wechsel zwischen zwei Gitarren mit unterschiedlichem Output (Humbucker/Singlecoil) das Signal anzugleichen, oder als permanenter Boost um Signaldegradation in langen Effektketten entgegenzuwirken.

This device adds a preset amount of gain, using a single control. With a guitar, this lets you boost your signal for lead work, adjust between two different guitars with unmatched output (i.e., humbucker to single coils), or it can supply a permanent boost in a long effects chain where signal drop off is a problem. Power: Single 9-volt battery or Dunlop ECB-003 AC Adapter - Controls: Footswitch toggles amp on/bypass (red LED indicates on) Gain knob adjusts total output volume when micro amp Is engaged

Official Product Page

Manual

MXR M 133 Micro Amp- Official Demo

MXR M 133 Micro Amp Review Tone Report EN

Review by The Gear Page

Demo by Jack Griffiths

Demo by Takumi Craft

Review by Ultimate Guitar

Review by Musiker-Board

M133 Micro Amp

Tester

Fender amps of the ’50s and ’60s are beloved and coveted by guitarists around the world. Thanks to BOSS’ technology and tone know-how, the new FBM-1 brings the natural, fat, rich, bright tone of the Fender Bassman to a BOSS pedal. In conjunction with Fender, the new BOSS FBM-1 recreates the legendary tone of the 1959 Fender Bassman. Features include the same controls on the original Bassman: Presence, Treble, Mid, and Bass EQ controls. The FBM-1 also functions perfectly as a “pre-gain pedal” placed before an already overdriven amp to add the tone character of the Bassman.

BOSS

Demo by  TheSuperFunAwesomeHappyTimePedalShow

Demo by  All World Music

Review by reddit /guitarpedals

Review by Hometone Blog

FBM-1 Fender 59 Bassman

PedalSafe Type E1

QuickMount Type E

Pedal-Montageplatte für Standard-Boss-Pedale

Pedal Mounting Plate For Standard Boss Pedals

Schutzabdeckung & RockBoard-Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & RockBoard Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Schutzabdeckung & universelle Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & Universal Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

dave sturgeon

Das Caverns Delay Reverb V2 Dual-Effektpedal kombiniert Delay und Reverb. Es verfügt über Keeleys analoges Tape Delay mit Modulation-Optionen. Das warme 650ms Delay wird mit Spring, Shimmer oder Modulated Reverb kombiniert.

The Caverns Delay Reverb V2 dual-effect pedal combines delay and reverb. It features Keeley’s analog-style tape delay with modulation options. The 650ms of warm delay combine with Spring, Shimmer or Modulated Reverb. 

Keeley Electronics

Manual Part 2

Manual Part 1

Demo by Andy Martin

Caverns Delay Reverb v2

PedalSafe Type D3

QuickMount Type D

Pedal-Montageplatte für große horizontale Pedale

Pedal Mounting Plate For Large Horizontal Pedals

Schutzabdeckung & RockBoard-Montageplatte für WAMPLER Paisley Deluxe, HotWired & Dual Fusion Pedale

Protective Cover & RockBoard Mounting Plate For WAMPLER Paisley Deluxe, HotWired & Dual Fusion pedals

Schutzabdeckung & universelle Montageplatte für WAMPLER Paisley Deluxe, HotWired & Dual Fusion Pedale

Protective Cover & Universal Mounting Plate For WAMPLER Paisley Deluxe, HotWired & Dual Fusion pedals

Entwickelt, um den klassischen Fender Tremolo-Effekt (oder Vibrato, wie er oft genannt wird) zu emulieren, bietet der Tremulator eine „schiefe“ Amplitudenmodulation mit einer abgerundeten, traingularen Modulator-Wellenform. Es genügt zu sagen, dass der Tremulator wie der klassische Effekt vieler Vintage-Amps klingt, aber mit weniger Rauschen und Brummen und einer größeren Bandbreite an Geschwindigkeiten und Tiefen.

A hybrid of vintage sound and state-of-the-art quality, the Demeter Tremulator is designed for years of trouble-free operation.Designed to emulate the classic Fender tremolo effect (or vibrato as it is often referred to), the Tremulator features “lopsided” amplitude modulation with a rounded off traingular modulant waveform. Suffice it to say, the Tremulator sounds like the classic effect found on many vintage amps, but with less noise and hum and a greater range of speeds and depths.

Demeter Amps

Demo by JoowonGuitar

Demo by PedalCasters

Review by audiofanzine

TRM-1 Tremulator

As heard prominently on Jack White’s guitar solo in “Why Walk a Dog?”, this monophonic synth-fuzz has delighted and bewildered listeners since Jack began using it back in 2014. The Mantic Flex can provide an array of sounds from thick, phase sweeping squarewaves with pitch divebombs to brutal bitcrushed octaves and fluttery thereminesque squawks.

Mantic Effects

Review by Pedal of the Day

Review by Premier Guitar

Official Product Video

Demo by Na West

Mantic Flex

Das Bumble Buzz Pedal, handgefertigt von Chris Young von Union Tube & Transistor (der das Pedal gebaut hat, das für Jack Whites Gitarrensounds bei „Sixteen Saltines“ und den Gesang bei „I'm Shakin‘“ aus dem 2012er Album Blunderbuss verwendet wurde), ist bereit Summen und stechende Geräusche. Entworfen vom Third Man Creative Hive.

The Bumble Buzz Pedal, handmade by Chris Young of Union Tube & Transistor (who built the pedal used for Jack White's guitar sounds on "Sixteen Saltines" and the vocals on "I'm Shakin'" off of 2012's Blunderbuss), is ready for buzzing around and stinging sounds. Designed by the Third Man Creative Hive.

Union Tube & Transistor

Union Tube & Transistor Website

Third Man Records Website

Review by guitar pedal X

Demo by gearmandude

Jack White Demos Third Man Hardware Effects Pedals

TMR Bumble Buzz pedal (Readyman Studio Nashville with Jack White)

Bumble Buzz

The TU-3—the world’s best-selling stage tuner—unites trusted BOSS tuning technology with our iconic compact pedal format. Top performers everywhere rely on this robust stomp for fast and flawless tuning night after night, thanks to its high-visibility meter, simple operation, and road-tested durability. The versatile TU-3 also includes a mute function, tone-saving buffer, and power distribution capabilities, making it an essential utility tool for every player.

Demo by Equipboard

Review by reddit /Guitar

Review by The Gear Check

Review by bonedo

TU-3 Tuner

David Litaba

Das Premium Wah Pedal. Hier kann der Gitarrist den Wah-Effekt genau so zuschneiden, wie er es will. Mit Kontrolle über die Centerfrequenz (6 anwählbar), stufenloser Regelung der Wah-Bandbreite (Q-Control) und schaltbarem Volume Boost, stufenlos einstellbar von 0 bis satte +26dB.

 The Crybaby 535Q is the Swiss Army knife of wah pedals. It provides control over the most important wah parameters, making it easy for you to create your ultimate wah tone. Select the frequency center of the effect, then dial in the frequency range to be swept by the pedal. From narrow and sharp to broad and subtle, this powerful wah will deliver it. Once you've got your sound, make sure it gets heard with the adjustable, switchable boost that can create endless sustain on any note. This is the wah pedal of choice for guitar master Joe Satriani. The 535Q offers versatility never heard before. This pedal allows the player to customize and shape the sound of the wah. By a simple turn of the "Q" dial, you can shape your wah from a narrow, sharp wah to a broad, subtle wah. Powered by the Dunlop ECB-003 or 9 volt battery. (NEW version)---Powered by the Dunlop ECB-004 or two 9 volt batteries. (OLD version) The CRYBABY 535Q also offers six new guitar wah ranges, a variable boost from 0 to +16 dB and a hard wire on/off switch. It's new custom circuitry consumes less power and eliminates unwanted distortion. Powered by the Dunlop ECB-003 or 9 volt battery. (NEW version) Powered by the Dunlop ECB-004 or two 9 volt batteries. (OLD version)

Dunlop

Guitar World Demo

CRY BABY 535Q MULTI-WAH

QuickMount Type M

Pedal-Montageplatte für Dunlop Cry Baby Wah-Pedale

Pedal Mounting Plates For Dunlop Cry Baby Wah Pedals

Richard Lagerweij

The PLASMA product series is a revolutionary approach within the realm of overdrive and distortion, as it is a new and previously unexplored method of achieving signal clipping.
Instead of using LED circuits, transistors or vacuum tubes to produce overdrive, PLASMA technology transforms your instrument’s live signal into a series of continuous high-voltage discharges within a xenon-filled tube.

Gamechanger Audio

Product Page 

Demo by AndyDemos

Demo by Rabea Massaad

Demo by intheblues

plasma coil

The Triplegraph is a digital octave pedal designed by CopperSound Pedals and Jack White, featuring three proprietary telegraph keys and an integrated auxiliary loop. Utilizing a high-power DSP Blackfin Processor, Triplegraph triggers an octave down with the left key, octave up with the right key, while the middle key activates a killswitch or auxiliary loop. In KILL mode, the middle key acts as a momentary killswitch, allowing the player to remove their dry signal and attain a fully wet octave up and/or down when used in conjunction with the octave keys. In AUXILIARY mode, the player can connect one or more of their favorite effects in parallel with the octaves via the send/return jacks, and trigger them in momentary bursts. The high and low octaves can be triggered in parallel with the dry signal when the octave keys are pressed independently. The octaves themselves track seamlessly with zero latency, and can be triggered in latching or momentary modes, using our “Loctave” toggle switches. The telegraph keys themselves are composed of custom stainless steel and aluminum components, making them indestructible and exceedingly durable for both hand and foot operation. Over four years in the making, the collaborative result is an innovative, state of the art clean-tracking octave pedal, capable of standing its own against industry standards.

Coppersound

Third Man Records

Demo by BOB BRADLEY

Third Man Triplegraph

Introducing a new addition to the DigiTech Whammy Family – Whammy DT! We’ve taken the premier pitch shifting effects pedal added drop tuning and true bypass to bring you the ultimate Whammy pedal, the Whammy DT. With the Whammy DT, you can modify your tuning without having to change guitars or pause awkwardly to make adjustments for the next song. Key changes are at the tips of your toes and take just moments, which is crucial when the audience is feeling your vibe. Pitch shifting effects really help your guitar performance stand out and the Whammy pedal has been the core pitch shifting effect for famous artists for over 20 years. Now add full drop and raised tuning in addition to classic Whammy shifting to your effects arsenal and find out why the Whammy DT is the premiere pitch shifting effects pedal for every guitarist.

DigiTech

Whammy DT

Das Original aus NYC. Hendrix und Santana gehörten zu den ersten, die ein Stück des Pi bekamen, und seit über 40 Jahren hat der EHX Big Muff Pi den Sound der Rockgitarre definiert.

Er wird von zeitgenössischen Gitarristen und Rocklegenden für sein sattes, cremiges, geigenartiges Sustain verehrt, von Pink Floyd bis zu The White Stripes, jeder will immer noch ein Stück vom Pi!

The NYC original. Hendrix and Santana were among the first to get a piece of the Pi, and for over 40 years the EHX Big Muff Pi has been defining the sound of rock guitar.

Revered by contemporary guitarists and rock legends for its rich, creamy, violin-like sustain, from Pink Floyd to The White Stripes, everyone still wants a piece of the Pi!

Electro-Harmonix

BIG MUFF PI

Riff-Step™ by Step Audio takes the DigiTech Whammy, the most popular pitch-shifting pedal of all time, and multiplies its sonic potential. Riff-Step lets you hear notes that aren’t normally available on the Whammy, then sequence those notes into elegant harmonies and improbable riffs.

With this powerful new controller and patented technology, you can do anything from ripping Van Halen licks while holding a single note, to creating embryonic mindholes. But don't mistake Riff-Step for a noise machine, it’s a serious compositional tool, providing complementary counterpoint to melodic lines.

Riff-Step™ transforms the DigiTech Whammy pedal into a Pitch-Shifting Sequencer.

Comes ready to rock with 16 presets. Create additional Riff-Step sequences directly on the pedal or with the easy-to-use Online Programmer.

Step Audio

Riff-Step DigiTech Whammy Enhancer

Für 20-30 FX-Pedale, 2 MOD-Slots - **1002 x 424 mm / 39.45" x 16.69"** - erhältlich mit Gig Bag oder Flight Case

For 20 - 30 FX pedals, 2 MOD slots - **1002 x 424 mm / 39.45" x 16.69"** - available with Gig Bag or Flight Case

Jack White (The Raconteurs) 2019 Pedal Board

Das neue Caverns V2 Delay Reverb Dual Effektpedal kombiniert Delay und Reverb perfekt abgepackt für jedes Pedalboard. Reverb und Delay im Caverns V2 können getrennt geschaltet und geregelt werden, sind jedoch auch gemeinsam nutzbar. Die Reverb Seite ist bestückt mit einem 3-Wege Schalter, der dich zwischen Spring (einem Black Style Amp Reverb mit F-Style Tremolo), Modulation Mode (mit chorusartiger Modulation in den Trails) und Shimmer (mit zusätzlicher Oktave in den Hallfahnen) wählen lässt. Die Delay Seite verfügt über den Schaltkreis aus dem beliebten Magnetic Echo, design um analoge Delay Lines zu emulieren. Der 3-Wegeschalter lässt dich die Modulationsstärke wählen und Wow and Flutter zu den Repeats hinzufügen. Das Caverns V2 lässt dich zusätzlich zwischen True und Trails Bypass wählen, sodass du dir riesige Klanghöhlen schaffen kannst, die langsam ausklingen, wenn du das Pedal abstellst. Der Keeley Buffer wurde speziell design um deinen Tone komplett unangetastet zu lassen, ihn aber in voller Kraft and deinen Amp schickt.

The new Caverns Delay Reverb V2 dual effect pedal combines delay and reverb for the perfect end to any pedal board. The reverb and delay on the Caverns can be used individually or combined together. The Reverb side is equipped with a three way toggle switch than gives you the option to choose between Spring mode (Black style amp with F style tremolo), Modulation mode (choral modulation) or Shimmer mode (octave-up voices in reverb trails). The Delay side of the pedal incorporates Keeley's popular Magnetic Echo circuit, designed to emulate analog tape delay lines.  Three-way switchable modulation gives you options for adding Wow and Flutter to the repeats. Also, the new Caverns Delay Reverb V2 allows you to choose between True-Bypass or Trails, giving you the freedom to create huge caverns of sounds and let them ring out even after you turn the pedal off.  The Keeley buffer is engineered to retain your tone and feed your amplifier a full strength signal.

Keeley Caverns V2 - Demo Video - Mike Hermans

Keeley Caverns V2 - Demo Video - ProGuitarShopDemos

Keeley Caverns V2 - Demo Video - Livingroom Gear Demos

Review by That Guitar Lover

Caverns V2

PedalSafe Type C2

QuickMount Type C

Pedalmontageplatte für große vertikale Pedale

Pedal Mounting Plate For Large Vertical Pedals

Schutzabdeckung & RockBoard-Montageplatte für WALRUS EB-10, WAMPLER TapeEcho & PlexiDrive Pedale

Protective Cover & RockBoard Mounting Plate For WALRUS EB-10, WAMPLER TapeEcho & PlexiDrive pedals

Schutzabdeckung & universelle Montageplatte Für WALRUS EB-10, WAMPLER TapeEcho & PlexiDrive Pedale

Protective Cover & Universal Mounting Plate For WALRUS EB-10, WAMPLER TapeEcho & PlexiDrive pedals

Thomas Roots

Snakebyte

Das RockBoard MOD 4 - All-in-One Wireless System Receiver + Patchbay für Pedalboards bietet eine einfach zu realisierende, kabellose Verbindung zwischen deinem Instrument und deinem Pedalboard. Dabei nutzt es eine digitale Wireless Technologie, die eine beeindruckende Klangqualität, ein einfaches Setup und eine zuverlässige Nutzung für aktive Musiker garantiert. Das Wireless System arbeitet im 2,4 GHz ISM Band und kann so weltweit ohne Beschränkungen genutzt werden. Mit einem nutzbaren Frequenzbereich von 20 Hz - 20 kHz und nur 5 ms Latenz bleiben keine Wünsche offen. Die Patchbay-Sektion wurde entwickelt um Verbindungen und Anschlüsse des Pedalboards von der Unterseite nach außen zu führen, dir einen zentralen Zugangspunkt zu deinem Setup zur Verfügung zu stellen und um deine Kabelwege aufzuräumen und sortieren zu können. Die A, B, C und D TRS Buchsen sind als direkte, durchgängige Verbindungen von der Vorderseite des MOD 4 zu den entsprechenden Buchsen auf der Rückseite verkabelt. Damit kannst du deine Effekt-Kette so einrichten, dass du bei der Vorbereitung auf den Gig lediglich Kabel an der Vorderseite des Boards einstecken musst, anstatt unter dem Board zu hantieren.
- Wireless System Receiver + Patchbay für Pedalboards, inkl. Wireless Transmitter
- 2,4 GHz ISM Band für weltweite Nutzung
- 30 m durchschnittliche Reichweite (ohne Hindernisse)
- 24 bit / 48 kHz unkomprimierte digitale Signalübertragung
- 20 Hz - 20 kHz Frequenzbereich
- 5 ms Latenz
- 103 dB Dynamikbereich
- 85 dBm HF-Empfindlichkeit
- 0.2% Verzerrung (THD)
- 4 wählbare Kanäle
- passend für MOD Slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe anderer Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 4x 6,3 mm Stereo-Klinke Thru (TRS)
- 1x 6,3 mm Mono-Klinke Receiver Audio Ausgang (TS)
- 1x DC 2,1 x 5,5 mm Hohlstecker Thru
- 1x AC IEC Thru
- 1x USB Type A Charge Ausgang
- Stromversorgung via optionalem 9V DC Netzteil, 2.1 x 5.5 mm Hohlstecker, Polarität (-) innen
- Batteriebetrieb nicht unterstützt
- Stromaufnahme 500 mA
- passiver Betrieb möglich (nur Patchbay, ohne Wireless System)
- Abmessungen mit Frontplatte (B x T x H): 175 x 85 x 47 mm
- Abmessungen ohne Frontplatte (B x T x H): 160 x 85 x 33 mm
- Gewicht 500 g
- Wireless Transmitter, zwei Antennen, ein USB Kabel, Montageschrauben und Muttern im Lieferumfang enthalten

The RockBoard MOD 4 - All-in-One Wireless System Receiver + Patchbay for Pedalboards offers an easy-to-use wireless connection between your instrument and your pedalboard, featuring digital wireless technology that delivers incredible audio quality, a simple setup procedure, and reliable use for any gigging musician. The wireless system works in the 2.4 GHz ISM band for unlimited worldwide use and offers a full 20 Hz - 20 kHz frequency range with only 5 ms of latency. The patchbay module is designed to route connections from underneath your pedalboard to its front, giving you a central access point and tidying up your connections. The A, B, C, and D TRS sockets are wiring thru-connections from the front of MOD 4 to the corresponding sockets on the back. This allows you to connect your pedals permanently underneath the board, so you only have to connect cables to and from the front of the board, instead of having to route underneath it when setting it up for a gig.
- wireless system receiver + patchbay for pedalboards, incl. wireless transmitter
- compatible with guitar wireless system
- 2.4 GHz ISM band for worldwide use
- 30 m / 100 ft. approx. range (without obstacles)
- 24-bit / 48 kHz uncompressed digital transmission
- 20 Hz - 20 kHz frequency range
- 5 ms latency
- 103 dB dynamic range
- 85 dBm RF sensitivity
- 0.2% total harmonic distortion
- 4 selectable channels
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- detachable front plate for mounting on top or underneath pedalboards
- 4x 6.3 mm / 1/4" stereo thru (TRS)
- 1x 6.3 mm / 1/4" mono receiver audio output (TS)
- 1x DC 2.1 x 5.5 mm barrel thru
- 1x AC IEC thru
- 1x USB Type A charge output
- power supply via optional 9V DC power adapter, 2.1 x 5.5 mm barrel plug, polarity (-) center
- battery operation not supported
- current draw 500 mA
- passive operation possible (patchbay only, without wireless system)
- dimensions with front plate (W x D x H) 175 x 85 x 47 mm / 6 57/64" x 3 11/32" x 1 27/32" 
- dimensions without front plate (W x D x H) 160 x 85 x 33 mm / 6 19/64" x 3 11/32" x 1 19/64"
- weight 500 g / 1.1 lbs
- incl. wireless transmitter, two antennas, USB charging cable, mounting screws, and counter nuts

2.4 GHz Guitar Wireless Receiver, Transmitter + TRS Patchbay

My Dream Pedal Board

 Iron Heart

Manual Page

OS-2 Overdrive/Distortion

Der DigiTech Whammy bietet Ihnen dieselben haarsträubenden „Dive Bomb“-Effekte, packenden Pitch Bends und blitzschnellen Harmoniewechseln, die Sie suchen, sowie einige neue Überraschungen. Verändern Sie ganze Akkorde mit der neuen Einstellung für die Tonhöhenverschiebung von Akkorden und führen Sie klassische Single-Note-Bends aus.

The DigiTech Whammy brings you the same hair-raising “dive bomb” effects, gripping pitch bends and lightning harmony shifts you are looking for plus a few new twists. Bend entire chords with the new chordal pitch shifting setting, and execute classic single note bends.

Review by HORN FX

Review by musicradar

Demo by S19NAL C14AIN

Demo by Leduc's Own Music Shop

Sweetwater Exclusive Product Page

Whammy V

Oft kopiert aber nie erreicht, rangiert das schwer zu findende, originale, Phase 90 bei den Sammlern alter Bodentreter ganz weit oben. Das Original - seit der Gründung der Firma Dunlop bis in die späten 70er Jahre erhältlich – definierte den klassischen Phase Shifter Sound und war in allen Musikstilen zu hören, egal ob Hard Rock, Jazz-Fusion oder Funk-Hits. Der nach dem Kultpedal der Firma designte Phaser kommt puritanisch mit einem Regler aus, über den der Phaser-Speed einstellbar ist. Eine rote LED über dem stabilen Fußschalter zeigt den Schaltstatus an. Das massive Spritzgußgehäuse verfügt über jeweils 1/4" Klinke In- und Out-Eingänge. Betrieben wird der Kulttreter mit einer 9V Batterie, die in einem leicht zugänglichen Batteriefach auf der Unterseite Platz findet. Es ist erhältlich in der ursprünglichen orangenen Farbe.

This device has found its way into many of Eddie Van Halen's recordings, adding a shimmery velocity to lead passages or a more dramatic swoosh to muted strumming. Not just for guitars; it works well with bass, keyboards and even vocals. Vary the speed from a subtle, long cycle to a fast, watery warble...and myriad vintage vibrations in between. Power: Single 9 volt battery or Dunlop ECB-003 AC Adapter - Controls: Footswitch toggles effect on/bypass (red LED indicates on) Speed knob varies rate of phase sweep

Review by Guitar Player

Demo by Reverb

M101 Phase 90

Welcome to your new home for guitar tone. The sound of legendary amps and effects, from vintage valves to the latest hi-tech gear, in a robust, road-ready housing: that’s our DNAfx Git advanced amp modelling multi-effect processor. Create your perfect guitar tones selecting modelled gear from a plethora of classic and modern amps, cabs and effects; dive into the onboard drum machine to accompany your riffs; connect to your computer to edit your patches or record your playing… DNAfx is a great-sounding, super-portable guitar rig for gigs, practice or song-writing sessions featuring two quality footswitches and a built-in expression pedal for on-the-fly editing, a big colour LCD display, all the I/O you could ever need. Great tone? Check. Portable? Check. Great price? Check.

Harley Benton

Harley Benton DNAfx Git Software - Tones in 90 sec

Product Demo 

DNAfx GiT Pro

RockBoard

ISO Power Block V6+

Für 9-14 FX-Pedale, 2 MOD-Slots - **722 x 236 mm / 28.43" x 9.29"** - erhältlich mit Gig Bag oder Flight Case

For 9 - 14 FX pedals, 2 MOD slots - **722 x 236 mm / 28.43" x 9.29"** - available with Gig Bag or Flight Case

Der One Trick Pony™ ist das einfachste MIDI-Gerät der Welt: ein robustes Fußschalter-Controller, das mittels Standard-MIDI-Kabel mit Ihrem MIDI-fähigen Gerät verbunden wird und abwechselnd MIDI-Start- und Stop-Meldungen sendet. Es benötigt keine externe Stromversorgung, da es mit einer einzelnen Knopfzelle betrieben wird. Gehäuse aus massivem Aluminium-Druckguss, ausgelegt auf Zuverlässigkeit und Einfachheit.

The One Trick Pony™ is the world’s simplest MIDI device, a rugged single-footswitch controller that connects via a standard MIDI cable to your MIDI-enabled device and sends MIDI Start and Stop messages on alternate presses. No external power connection is needed since it runs off a single coin cell. Built in a compact die-cast aluminium enclosure, it is designed for reliability and simplicity.