RockBoard

Putting together a few pedals I'd use for an experimental gig. 

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 1 V2 ist eine Pass-Through-Box, die speziell für Gitarristen und Bassisten entwickelt wurde. Du kannst das MOD 1 V2 nutzen um mehrere Pedale deines Setups im Front End und im Effekt-Loop des Verstärkers zu postieren (4-Kabel Methode) oder die vier TRS-Anschlüsse als zentralen Zugang und Ausgang des Boards nutzen. Die XLR-Through-Verbindung kann als Signalausgang vom Pedalboard zum Mischpult oder zur PA verwendet werden.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 5 x 6,3 mm TRS thru
- 1 x XLR thru (männlich vorne / weiblich hinten)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 5 x 6,3 mm / ¼" TRS thru
- 1 x XLR thru (male front / female back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR, IEC & Barrel Patchbay

Jazz Board 

Tester

Dark Star is a lo-fi reverb aimed at slow attack and pad generation. Three modes introduce pitch shifting, delay, and bit crushing to the core voice of long, dark reverb. A hold switch allows infinite trails while the pedal is on. This is a reverb to go first in your signal chain, and almost an instrument of its own.

Old Blood Noise Endeavors

Product Page

Manual

Official Product Video

Dark Star V2

Resyn Thesis

Signal Blender is a parallel routing solution focused on blending sounds side by side rather than running them into each other. With two send/returns and independent switching over each send/return and the main clean signal, Signal Blender can be used as a parallel effect blender, 3-to-1 mixer, 1-to-3 splitter, active ABY, volume level setter, and more.

Controls include:

CLN, A, and B to set volume of the Clean input and each Return

Independent on/off for Clean (main input) and each Send/Return

Phase switch for each Send

True bypass from input to output when all sections are off

Soft-touch bypass footswitches for minimal switch noise

Dan Explains It All - Signal Blender

Nothing Special: Utility Line

Product Page 

Signal Blender

Reflector V3 is a dense lush chorus coupled with three modes of modulation. This was a chorus with a bent, an ephemeral voice floating between aural dimensions.
Controls included Rate and Depth for the chorus LFO, Mix for a balance between unaffected and affected signal, and Modulate for unique control in each mode: pitch shift, reverb blend, and filter depth. A three-way toggle switch allows the player to choose between three modes: Wrinkle, a deep chorus with an additional pitch shift from one octave down to one octave up; Washed, a simple lush chorus feeding into a reverb; and Mirrors, a chorus and moving filter linked via the chorus rate.

Review by reddit /guitarpedals

Review by Guitar.com

Demo by Ambient Endeavors

Reflector V3 Prism Colorway

Darkglass hat den gleichen Aufbau wie beim B7K Ultra verwendet. Alle Potis und Hebelchen sitzen an der gleichen Stelle, auch die Fußschalter für Bypass und Distortion sitzen an den gleichen Stellen. Auch ein DI Out ist wieder dran. Einen signifikanten optischen Unterschied gibt es aber doch: Die Front ist silbern statt schwarz. In meinen Augen sieht das Pedal dadurch sehr viel edler aus.

Classic tone, refined. The upgraded Vintage Ultra with Aux in features: (1) Single user loadable cabinet simulation impulse response. (2) Micro-USB B port to connect to PC/Mac to load a different Virtual Cabinet through the Darkglass Suite. (3) 3.5mm headphone output with cabinet simulation.

Darkglass Electronics

Demo by  EytschPi42

Review by Doug Robertson, thebasschannel.net

Review by Guitar Interactive Magazine

Demo by tone zone 

Demo by the bass channel 

Vintage Ultra

Filippo Rimondi

ZVEX

Box Of Rock Vexter

Vibrophase

Basstortion

Super Seek Trem

Für 7-12 FX-Pedale, 1 MOD-Slot - **470 x 330 mm / 18.50" x 12.99"** - erhältlich mit Gig Bag oder Flight Case

For 7 - 12 FX pedals, 1 MOD slot - **470 x 330 mm / 18.50" x 12.99"** - available with Gig Bag or Flight Case

Tone expansion. Working on getting a large presence in the band with this settup. 

Broad Tone Board 

You’ll find sounds from a gentle full range boost, gritty treble boost, gassing up to a full aggressive fuzz.
Great for boosting and adding some edge to a dirty preamp, add definition to a saturated front end.

Controls:
Gain– Dial up harmonic content maxing up to fuzzy
Volume – Match your amp volume, then cut or boost as needed
Contour – toggle between a bassy setting and a trebly setting.
Range – toggle between lower and higher gain ranges.

Black Arts Toneworks 

Black Arts Toneworks SKYBOOST

Black Arts Toneworks SKYBOOST riff rider demo

Skyboost

The Supreme has all of the sounds and abilities of the Standard and Primitive Pharaohs, but with some very useful additions and a bit of a twist.
In place of the hi/lo switch,the Supreme utilizes a variable pre input control to infinitely adjust the saturation of the front end of the circuit from 1 to 10. In Place of the 3 way diode selector, the Supreme utilizes a 6 way rotary switch to select from the Standard Pharaoh diode settings, plus an additional 3 setting not available on the previous Pharaohs. The Pharaoh supreme allows selection from the following diode settings: Germanium, Asymmetrical Germanium(standard Pharaoh), Silicon (standard Pharaoh), Mosfet,LED and Bypass (standard Pharaoh).

The Pre knob control in addition to the Clip knob, produce an array of sounds and textures that expand the Pharaoh into the ultimate, or Supreme fuzz-stortion that Black Arts has produced.

To visually demonstrate the depth of the new Pharaoh Supreme, a huge 10mm green LED glows with a calm, deep and inviting look into the window of the Supreme soul.

Pharaoh Supreme Official Demo V1

Pharaoh Supreme Official Demo v2

Pharaoh Supreme

Der Pigtronix EP2 Envelope Phaser macht aus deinem Gitarrensound ein extraterrestrisches Erlebnis der Extraklasse. Unfassbar vielseitige Regelmöglichkeiten sorgen dafür, dass du deine Gitarre SO garantiert noch nicht gehört hast. Der Envelope Phaser schickt einen breiten und durchsetzungsstarken Sweep durch das Signal und kann in den Envelope, LFO oder einer Mischung aus beidem wandern.

The Pigtronix Envelope Phaser pours on the special sauce to take your tone into outer space. Accentuating and sweeping through the harmonics of any musical source, the motion of this revolutionary phase shifter can be controlled by Envelope, LFO or a blend of both.

Envelope Phaser makes it easy to dial in monster envelope tones for any instrument or playing style. This envelope kicks it up a notch with a “Staccato” function that is ideal for fast picking, funk bass and tight rhythm guitar. The Staccato circuit enables an “intelligent envelope” that listens to your playing and quickly discharges the envelope between your notes. This crafty circuit enables incredibly responsive envelope performance, even during rapid fire playing.

Pigtronix

Demo by Prymaxe 

Demo by Reverb 

Review by Pedal of the Day

Review by No Treble

Envelope Phaser EP2

Der Bass Synth Wah ist eine aufregende Kombination aus sieben verschiedenen Synth- und Wah-Effekten, darunter Envelope Filter, Synth-Töne, Filtergeneratoren und Oktavverschiebung. Der Bass Synth Wah kann entweder in Reihe mit deinen aktuellen Pedalen oder parallel zu deinem Bass-Signal betrieben werden, um einzigartige Kombinationen aus Bass- und Synthesizer-Sounds zu erzeugen.


The Bass Synth Wah is an exciting combination of seven different
synth and wah effects including envelope filter, synth tones, filter
generators, and octave shift. The Bass Synth Wah can be run inline
with your current pedals, or parallel with your bass tone to create
unique combinations of both bass and synth sounds.

DigiTech

Demo by BassTheWorld.com

Demo by Dan Leggat

Demo by Bass Stuff

Demo by Gnarly Murphy

Review by Talk Bass

Review by Musiker Board

Bass Synth Wah Envelope Filter

Our legendary Boogie® Five-Band Graphic EQ is now available in a Pedal! For well over four decades the Boogie Five-Band Graphic EQ has been at the heart of chart topping guitar sounds and it’s hard to ignore the impact its now-classic “V-Curve” has had on modern guitar sounds and popular music. Now we offer this powerful tool in a stand-alone pedal format that packs the same tone-shaping power and hand-built in Petaluma, CA quality as those found in our high-end amplifiers.

Mesa Boogie

Review by

Demo by Lucas Fowler

Boogie Five-band Graphic

Flat Light is a flanger unlike any other. Taking inspiration from the sounds within flanging, three modes add pitch shifting, additional flanger lines, or echoes to the foundational flanger.

Review by musicradar

Review by delicious audio

Demo by Eric Merrow

Flat Light

Float is a dual analog filter pedal. It features two independent filters, independently controllable and routable as stereo, parallel mono, or series mono. Digital control opens up tweakable motion from envelopes and LFOs, or stick with a fixed filter and slide the cutoff as if you’ve just added a synth to your pedalboard. It’s the filter tool greater than the sum of its parts.

Review by Russo Music

Demo by Stephen McLeod

Float

Stereo Routing-, Split- und Zusammenfühurngs-Pedal. Zwei TRS-IN/OUTs, vier TS-IN/OUTs. Passives Pedal, Strom nur für LEDs benötigt. Typische Anwendung ist z. B., wenn aus einem Stereopedal zwei Mono-Ausgänge kommen, das nächste Signal in der Kette aber nur einen Stereo-Eingang hat. Das T- und R-Signal werden dann einfach zu einem TRS zusammengeführt. 

Split | Meld Is a passive, non-summing, non-destructive way to manage parallel dual-mono and stereo signal paths. 

Split | Meld is an audio routing solution. 

Split | Meld consists of 2 pairs of a TRS (or Stereo) Jack & 2 TS Mono jacks.
The TIP & RING of each TRS jack is routed to a corresponding Mono jack.

Use SPLIT | MELD to route your parallel signal path in a myriad of ways—Especially useful with devices that have TRS input & dual-mono output.

Official Website

Review by Guitar World

Review by Gearnews

Demo by Jam in the closet

SPLIT|MELD

Beam Splitter takes one signal and makes three copies of it, each with differing overdrive voices and delay times. It is specifically our way of creating a huge sound out of a regular one. Output can be kept in parallel mono or split individually to three places. While the goal is singular bigness, you can also find strange filters, flangers, lo-fi vibratos, and trailing slap-back echoes using the delay controls and blending everything to taste.