George Zafeiriou

85x50

Tester

The SUPER SYNTH turns your bass into a synthesizer—with seriously cool sounds and no tracking delay! It also doubles as a digital octaver, with both octave up and octave down layers. The parameters of the pedal’s presets can be modified using the Markbass Pedal Controller software. Simply install the software, connect the pedal to your computer using a USB cable, modify the presets as desired, and then load them back onto the pedal. Like all our pedals, this unit features true bypass.

Markbass

Product Page

Super Synth

Die MB Mini-Pedalserie von Markbass wird auf dem gleichen hohen Qualitätsniveau wie unsere Standard-Effektlinie hergestellt, verwendet aber ein ultrakompaktes, leichtes Gehäuse. Kleiner als andere Stompboxen, passen diese unglaublich klingenden Pedale selbst auf die vollsten Pedalboards, und der 9-12V-Strombedarf bedeutet, dass Sie sie mit jedem Standard-Netzteil verwenden können.
Verleihe deinem Pedalboard einen „Boost“ mit dem MB Mini Boost, der auch unseren variablen Preshape-Filter enthält (hebt die Tiefen und Höhen an und senkt die Mitten).

The MB Mini series of pedals from Markbass is made to the same high quality level as our standard effect line, but uses an ultra-compact, lightweight chassis. Smaller than other stompboxes, these incredible-sounding pedals will fit onto even the most crowded pedal boards, and the 9-12V power requirement means you can use them with any standard power supply.
Give your pedalboard a “boost” with the MB Mini Boost—which also features our Variable Preshape Filter (boosts lows and highs, and cuts mids).

Demo by Pepo Vidal

Official Product Video

Review by Talk Bass.com

MB MINI BOOST

Der MARKBASS COMPRESSORE ist ein hochmodernes Komprimierungstool mit einer ECC81 Roehre im Signalweg.
Diese bietet einen satten und warmen Klang voller Obertoene im komprimierten Signal. Deshalb muesste er eigentlich TUBE COMPRESSORE heißen.
Weiterhin verfuegt der MARKBASS COMPRESSORE ueber alle wichtigen Funktionen eines Kompressors, die man mit den Reglern GAIN, THRESHOLD, RATIO, ATTACK, RELEASE und VOLUME einstellen kann.
Auch ein TRUE BYPASS ist vorhanden! Das bedeutet, bei ausgeschaltetem Kompressor geht das Signal direkt von der Eingangsbuchse zur Ausgangsbuchse, ohne die Audioqualitaet zu beeintraechtigen.

The MARKBASS COMPRESSORE is a state-of-the-art compression tool with an ECC81 tube in the signal path.
This provides a rich and warm sound full of harmonics in the compressed signal. That's why it should really be called TUBE COMPRESSORE.
The MARKBASS COMPRESSORE also has all the important functions of a compressor, which can be adjusted using the GAIN, THRESHOLD, RATIO, ATTACK, RELEASE and VOLUME controls.
There is also a TRUE BYPASS! This means that when the compressor is switched off, the signal goes directly from the input socket to the output socket without affecting the audio quality.

Demo by tune4media

Review by OVNI LABS

Review by bonedo

Review by Compressor Pedal Reviews

Manual

Compressore

David Litaba

The Microtubes Infinity shares the footmark of our programmable line, packed with our three legendary Microtubes distortions: B3K, Vintage, and X. Moreover, it allows multiband compression on every mode, blending Impulse responses between distortions while adding extra controls via the Darkglass suite for an endless number of features: An infinity of possibilities.

Darkglass Electronics

Demo by  Pair of Pandas

Demo by Paajanenae

Review by TalkBass.com

Review by Rainer Wind, bonedo.de

Demo by Darkglass Electronics

Microtubes Infinity

Der EHX TriParallel Mixer ist ein leistungsstarker Hub für die Erstellung und Mischung von Effekten mit drei separaten Effektschleifen und flexiblen Bedienelementen für vielfältige Konfigurationen.

Der TriParallel Mixer ist angesichts seines Funktionsumfangs überraschend kompakt und dank seiner intuitiven Bedienelemente und Ein-/Ausgänge einfach zu bedienen.

Verwenden Sie ihn, um zwischen bis zu drei separaten Effektschleifen zu wechseln oder sie zu mischen. Senden Sie den Ausgang einer Gitarre oder eines anderen Instruments an drei separate Verstärker oder geben Sie drei separate Instrumente ein, um zwischen ihnen zu wechseln oder sie auf einen einzigen Ausgang zu mischen. Mischen Sie Effekte parallel, um Klänge zu erzeugen und Optionen zu nutzen, die bei der seriellen Verwendung von Effekten (nacheinander) nicht möglich sind.

The EHX TriParallel Mixer is a powerful effects creation and mixing hub with three separate FX loops and flexible controls allow for multiple configurations.

The Tri Parallel Mixer is surprisingly compact considering the level of functionality it provides, while its intuitive controls and I/O make it easy to operate.

Use it to switch between or mix up to three separate effects loops. Send a guitar or other instrument out to three separate amplifiers, or input three separate instruments to switch between or mix to a single output. Mix effects in parallel to create sounds and allow for options not possible when using effects in series (one after another).

Electro-Harmonix

Demo by Gaving Forbes Music

Review by Guitar Player

Review by Gear News

TRI PARALLEL MIXER

PedalSafe Type O

QuickMount Type O

Pedal-Montageplatte für FRIEDMAN Overdrive Deluxe & WALRUS Descent Pedale

Pedal Mounting Plates for FRIEDMAN Overdrive Deluxe & WALRUS Descent pedals

Schutzabdeckung & RockBoard-Montageplatte für FRIEDMAN Overdrive Deluxe & WALRUS Descent Pedale

Protective Cover & RockBoard Mounting Plate For FRIEDMAN Overdrive Deluxe & WALRUS Descent pedals

Schutzabdeckung & universelle Montageplatte für FRIEDMAN Overdrive Deluxe & WALRUS Descent Pedale

Protective Cover & Universal Mounting Plate For FRIEDMAN Overdrive Deluxe & WALRUS Descent pedals

Amazingly powerful and ultra-versatile, GT-1000CORE delivers the most complete guitar and bass processing experience available in a single stompbox. The full DSP muscle of the flagship GT-1000 lives inside this mini juggernaut, driving class-leading sound quality, advanced AIRD technology, 24 simultaneous effects blocks, and over 140 unique amp/effect types for unlimited creative expression. GT-1000CORE fits into any pedalboard setup and works equally well as a standalone processor for playing live and in the studio. And with flexible I/O and vast control support, it’s right at home as the core of any rig.

BOSS

Review by The Gear Page

Review by reddit /guitarpedals

Review by guitar pedal X

Demo by  Bernd Kiltz - Gitarrenvideos

GT-1000 CORE

Passive to active and back again with no hassle.
The Radial Tonebone Bassbone is a smart EQ/DI pedal that manages your bass signal with 2 separate channels and a powerful EQ that overrides the preamp's tone settings. The Tonebone allows switching between a traditional passive bass and a modern active bass during a gig without lengthy and awkward adjustments to the preamp, EQ, amp, and instrument level. This EQ and DI Box can also be used with a single bass to provide 2 separate signals finessed by its incredible enhancement capabilities. The integrated boost, variable gain, and effects loop can be used individually or together. A balanced XLR out sends the complete signal direct to the board for PA-only gigs and studio time. Added heft and punch to your tone is like a secret weapon. The Radial Tonebone Bassbone is powered by a 15VDC power supply.

Radial Engineering

Review by bonedo.de

Demo by Premier Guitar 

Demo by Pertybass

Tonebone Bassbone  V1

Designed to be the perfect complement to our distortion circuits, the flexibility and portability of the Harmonic Booster is also the perfect one-stop solution for gigging musicians in search of a precise and harmonically rich clean preamplifier.

Demo by Stuart Clayton

Review by Naris Sebastian Stolz, amazona.de

Demo by BassTheWorld

Harmonic Booster

David Graves

The Cali76 Bass Compressor is a studio-grade compressor pedal inspired by the world-famous Urei® 1176® studio compressor, heard on many of the greatest studio recordings since the 1960s. The Cali76 Bass Compressor uses uncompromising all-analogue circuitry to make these distinctive, ultra-fast FET compression tones available to the modern guitarist.

The latest in a long lineage of Cali76 compressors, the Cali76 Bass Compressor features a full set of studio-style controls, a DRY knob for parallel compression and an improved sidechain that matches the response of our sought-after “large format” Cali76 – the pedal that put Origin Effects on the map back in 2012.

With a 10-LED gain reduction meter, a pedalboard friendly enclosure and massive headroom thanks to internally increased voltage, the Cali76 Bass Compressor marks the culmination of over a decade of experience making the world’s finest compressor pedals.

Origin Effects

Demo by  BassTheWorld.com

Review by reddit /basspedals

Review by Gearnews

Review by AMAZONA

Manual download

Cali76 Bass Compressor (Classic)

With the 200 series, BOSS introduces a new generation of pedals that pack advanced sound and versatility into a streamlined size that saves space on your board. Grab-and-go controls and multi-function switches make operation easy and intuitive, while onboard memories allow you to store multiple setups for instant recall. All 200 series pedals feature premium audio quality with 32-bit internal processing and offer support for external control via footswitches, an expression pedal, or MIDI.

The OD-200 Hybrid Drive brings next-level sound, feel, and flexibility to overdrive and distortion, combining decades of BOSS tone expertise with innovative technologies. Powered by hybrid analog/digital circuitry, this dream pedal delivers any drive tone you can imagine via 12 primary modes, 15 boost types, series/parallel gain paths, and more. There’s even an advanced gate on board, ideal for both eliminating noise and adding tightness to high-gain drive tones.

Demo by Rabea Massaad

Demo by EytschPi42

OD-200 Hybrid Drive

Offering a universe of rich, analog-inspired polyphonic tones in a small footprint, the SY-200 makes it simple to weave BOSS’s expressive guitar and bass synth technology into all of your musical journeys. Building on the fun, instant-gratification experience of the acclaimed SY-1, this blue inspiration machine features an expanded sound set, more tone-shaping possibilities, and 128 memories for storing your sonic creations. Two onboard footswitches provide deep real-time performance control, and you can take things even further with external footswitches, an expression pedal, and MIDI.

Demo by  Six-String Samurai

Review by Sound on Sound

Review by musicradar

SY-200 Synthesizer

Featuring an advanced multi-core processor with a huge library of on-board guitar FX, amp, cab and microphone emulations, smart amp/pedal cloning and IR loading, best-in-class looper, and a full suite of vocal FX (including the industry-standard Antares Auto-Tune), the HeadRush® Prime is the most powerful, versatile, and realistic-sounding floorboard FX processor ever. The high resolution and ultra-responsive 7-inch display enables you to touch, swipe, and drag-and-drop to instantly create and edit your rigs in an unprecedentedly easy-to-use way.

Headrush 

Demo by Chilled Guitar Reviews 

Review by Premier Guitar

Review by delamar

Headrush prime

The MXR Bass Envelope Filter delivers classic analog envelope filter sounds in an easy-to-use and compact pedal designed specifically for bass. Separate Dry and Effect controls let you dial in the perfect mix of effected and direct signals, so you can bring the funk without losing the low end. Its wide range of filter tones can be shaped with the Decay and Q controls, and a simple twist of the Sensitivity knob can tailor the pedal for your attack—as well as adjust for passive or active basses. The Bass Envelope Filter's power supply circuitry is designed to withstand over-voltage or polarity mishaps, and its true-bypass switching preserves your tone in bypass mode. It's all packaged in a durable, lightweight, Phase 90-size aluminum housing for the ultimate in portability and pedalboard space-saving dimensions.

Demo by The Bass Chanel

Demo by Bass Whisperer TV

M82 Bass Envelope Filter

f bass

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 2 V2 wurde als Patchbay speziell für MIDI-basierte Setups, Verstärker und Geräte sowie eine USB-Verbindung zwischen Pedalboard und Computer oder Soundkarte entwickelt. Mit vier TRS-Through-Verbindungen lässt sich das MOD 2 V2 perfekt in True Stereo Setups von Keyboards oder Synthesizern integrieren oder als zentraler Zugang und Ausgang des Boards nutzen. Alternativ lassen sich Effektpedale im Front End und im Effekt-Loop des Verstärkers postieren (4-Kabel Methode).
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 4 x 6,3 mm TRS thru
- 2 x 5-pin DIN MIDI thru
- 1 x USB Type A thru
- 1 x DC 2,1 x 5,5 mm Hohlstecker thru
- 1 x AC IEC thru (männlich vorne / weiblich hinten)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 420 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 2 V2 is a pass-thru box especially designed for MIDI-controlled amplifiers and devices, USB connections to a computer, or a sound card. The 4x TRS thru connections will also work great for true stereo setups with keyboards or synthesizers. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 4 x 6,3 mm / ¼" TRS thru
- 2 x 5-pin DIN MIDI thru
- 1 x USB Type A thru
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 420 g / 0.93 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS, MIDI & USB Patchbay

New Pedal Board-copy

ampeg svt 4 pro

can also be controlled.
MIDI COMMANDER arranges normal control functions based on different HOSTs (software or gear who receive the
commands) and pre-defined as HOST modes. In addition, it also has two customizable HOST that it is used to arrange
self-defined MIDI control functions mapping with the foot switches.
Also it has two expression pedal inputs, which control the Wah and the Volume to assist the flexibility and creativity of playing. It can be powered by 2x AAA
batteries or USB, and it is also has the automatic charging function for chargeable batteries. (Require special activation to
avoid accidental charging or high current). This pedal design achieves minimum size and weight while keeping its
usability. It can be used along with other audio interface or hardware devices for live show and recording.

Melo Audio

Demo by Trey Xavier

Demo by intheblues

Official Website

Review by The Tone King

Review by VGuitar Forums

Review by GEAR GODS

Midi Commander

Hiu Fung Hui

The Hotone Tuner Press is not just your average tuner pedal; it's the epitome of versatility. Weighing in at a mere 600g, this pedal isn't just a tuner; it's a volume pedal, an expression pedal, and a buffer pedal all rolled into one. The footswitch provides tactile feedback, allowing you to seamlessly switch between expression and volume control. Elevating the pedal in volume mode activates silent tuning automatically. The HD LCD screen, complemented by the switching indicator, ensures an intuitive, accurate, and rapid user experience. Furthermore, the Hotone Tuner Press inherits the classic design of the popular Ampero Press series, seamlessly blending Hotone aesthetics with portability and practicality. 

HOTONE

Demo by Chris Ma的Dark Horse Lab

Tuner Press

QuickMount Type A

Pedal-Montageplatte für Standard-Einzelpedale

Pedal Mounting Plate For Standard Single Pedals

Der MXR Vintage Bass Octave bietet die warmen analogen Subbass-Vibes eines klassischen Schaltkreises mit überlegenem Tracking, sauberem Headroom und der Vielseitigkeit, die moderne Spieler verlangen. Er liefert eine beeindruckende Bandbreite an Sounds im leichten, platzsparenden MXR Mini-Gehäuse.

The MXR Vintage Bass Octave upgrades the warm analog sub-bass vibes of a classic circuit with superior tracking, cleaner headroom, and the versatility that modern players demand, delivering an impressive range of sounds in the lightweight, space-saving MXR mini housing.

Demo by Janek Gwizdala

Demo by The Bass Channel

Review by Harmony Central

Review by Premier Guitar 

M280 Vintage Bass Octave

Discover why top artists and producers have chosen Eventide for over 50 years with the H90 Harmonizer®, Eventide’s next-generation multi-effects pedal. Whether you want high-quality bread-and-butter effects or experimental sounds unheard, the H90 has everything you need to inspire your creativity with an intuitive UI designed with players in mind, 62 effect algorithms, and hundreds of Program combinations curated for a variety of instruments and genres. With its comprehensive I/O and flexible routing options, the H90 is designed to be the heart of your rig.

Eventide

Demo by Andertons Music Co

H90 Harmonizer®

Cyril Ruel

Allows a single guitar to control two GK-compatible units such as the GR-55.

Roland

US-20

Javier Murcia Dominguez

Soul Press II ist die nächste Generation der Hotone Press-Pedalreihe. Das neu gestaltete Upgrade basiert auf den beliebten Konzepten von Soul Press und Vow Press. Es integriert bis zu vier Funktionsmodi (Volume, Wah, Volume/Wah, Expression), was die Spielbarkeit auf ein neues Niveau hebt. Die Pedalstellungsanzeige zeigt die Pedalstellung in Echtzeit an. Die Auswahl des TONE-Modus und die Einstellung des Q-Werts stellen eine absolute Verbesserung von Klang und Funktionalität dar. Mehrere E/A-Optionen bieten einen vielfältigeren Zugang. Die neu gestaltete Größe des Pedals sorgt für Tragbarkeit und optimale Ergonomie. Soul Press II ist ein wirklich vielseitiges Wah-Pedal.   

Soul Press II is a next-gen product in the Hotone Press series pedal line. It's new-designed upgrade is based on the popular concepts of both the Soul Press and Vow Press. It integrates up to four function modes (volume, wah, volume/wah, expression), taking playability to new heights. The pedal position indicator shows the pedal position in real time. The TONE mode selection and Q value adjustment represent an absolute improvement in tone and functionality. Multiple I/O options provide more diverse access. The reimagined pedal size maintains portability while delivering an optimal ergonomic experience. Soul Press II is a truly versatile wah pedal.   

Review by headliner

Review by Bass Musician Mag

Demo by The Pedal Guy

Demo by Nobes Music

Demo by Pedal of the Day

Soul Press II

DigiTech

Bass Whammy (Blue)

RockBoard

ISO Power Block V16

Für 15-25 FX-Pedale, 2 MOD-Slots - **820 x 424 mm / 32.28" x 16.69"** - erhältlich mit Gig Bag oder Flight Case

For 15 - 25 FX pedals, 2 MOD slots - **820 x 424 mm / 32.28" x 16.69"** - available with Gig Bag or Flight Case

Ryan James

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 1 V2 ist eine Pass-Through-Box, die speziell für Gitarristen und Bassisten entwickelt wurde. Du kannst das MOD 1 V2 nutzen um mehrere Pedale deines Setups im Front End und im Effekt-Loop des Verstärkers zu postieren (4-Kabel Methode) oder die vier TRS-Anschlüsse als zentralen Zugang und Ausgang des Boards nutzen. Die XLR-Through-Verbindung kann als Signalausgang vom Pedalboard zum Mischpult oder zur PA verwendet werden.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 5 x 6,3 mm TRS thru
- 1 x XLR thru (männlich vorne / weiblich hinten)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 5 x 6,3 mm / ¼" TRS thru
- 1 x XLR thru (male front / female back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR, IEC & Barrel Patchbay

Enshanti Reggae/Dub Board

Du willst dein Signal splitten und nicht auf passive Geräte, die deinen Tone killen und Signal verlieren zurückgreifen? Hier hast du was du brauchst! Diese kleine Zauberbox nimmt dein Inputsignal und splittet es permanent in zwei gebufferte Ausgangssignale, sodass dein Sound nicht an Klarheit verliert. Schließ deine Gitarre ans eine Ende und schicke es an einen Tuner, Mixer, separaten Amp etc. und den anderen Ausgang an dein Pedalboard, wie immer.

Need to split your signal? Don’t want to settle for a passive device that will kill your tone and cause signal loss? This is what you need! This little box of magic takes your input signal and splits it into two always-on outputs that are buffered so you don’t lose clarity or tone in any way. Plug your guitar in and use one output to send your clean signal somewhere like a tuner, mixer, separate amp, etc... and send the other output through your board like normal.

Official Product Page

Buffered Splitter

QuickMount Type L

Pedal-Montageplatte für Standard-Mini-Pedale

Pedal Mounting Plate For Standard Mini Pedals

Bass Booster offers an entire sound spectrum of the most coveted traditional bass amprigs, from vintage to modern styles.You can also obtain gnarly overdriven sounds that typically require investing in a complex system with multiple rack effects that weren’t designed for bass in the firstplace.
 
PedalTank Bass Booster functions as a pre-amp, a stomp box, controls are designed to give you the flexibility to customize your own sound. After all, the greatest inspiration comes from having the sound that s right for you.

Pedaltank

Demo by  Keng Bassist

Bass Booster

Zixton Han

The MXR Ten Band Graphic EQ gives players
huge amounts of tone shaping and level control
in a bullet-proof enclosure. This pedal has
been upgraded with noise-reduction circuitry,
true bypass switching, a lightweight aluminum
housing, and a second output so you can run two
separate signal chains. With ten carefully chosen
frequencies and both input and output level
controls, the Ten Band EQ will let you tune your
bass or guitar rig to any room in seconds. 

Review by 

Demo by 

MXR M-108 Ten Band Graphic Equalizer Pedal

David Müllerchen

Standard aktive DI-Box. Kann über 9V Batterie oder 48V Phantomspeisung betrieben werden. Hochohmiger Eingang, größerer Ausgangspegel als eine passive DI-Box. Die aktive Schaltung ermöglicht die hohe Eingangsimpedanz von 1 MOhm und größere Empfindlichkeit des Einganssignals (typische Differenz zwischen Ein- und Ausgang: -4 dB). Die maximale Ausgansspannung beträgt bei Phantomspeisung +10 dBu. Ausgang: trafosymmetrisch. Durch eine spezielle "floating ground"-Schaltung funktioniert der Ground-Lift-Schalter auch bei Phantomspeisung.

Standard active DI box. Can be operated with 9 V batteries or 48 V phantom power. High-impedance input; higher output level than with a passive DI box. Active circuitry allows for high input impedance ( 1 meg. ohm) and higher input sensitivity (typical difference between in and out -4 dB). Maximum output impedance with phantom power operation +10 dB. Output: transformer balanced. The special "floating ground" circuitry enables ground lift even during phantom power operation.

Palmer

Review by Kemper Forum

Review by adam hall BLOG

Demo by

Demo by Kitharra TV

Pan 02

Teeratai Kaewmanee

The AG Preamp pedal inherits the renowned AG amplifier’s tight, fast response and extensive tonal flexibility, making it an essential component for discerning bassists. With its powerful 4-band EQ, the AG Preamp lets you sculpt your tone with finesse, adapting to any musical genre or playing style. From warm and punchy to bright and articulate, the pedal delivers unrivaled control and responsiveness. Foot-switchable broadband “deep” and “bright” controls further enhance your sound, providing added depth and presence for a rich and natural sonic impact.

Operating at 18 volts, the AG Preamp pedal ensures generous headroom and pristine signal integrity. You can confidently push your sound to the limits without sacrificing clarity or encountering unwanted distortion. The pedal maintains a clean, transparent tone that stays true to the player’s style.

The AG Preamp pedal also offers essential connectivity options. It features a built-in headphone output and auxiliary input, enabling silent practicing and jamming along with favorite tracks, as well as a DI output with pre/post and ground lift controls, making it an ideal solution for live performances and studio or at-home recording sessions.

Aguilar

Demo by Bass Bonedo

Review by Talk  Bass.com

AG Preamp

M288 Bass Octave Deluxe

Lee Atkin

Entwickelt in Zusammenarbeit mit Bass-Professor und Klangkenner Ian Martin Allison ist der MXR Bass Synth ein Kraftpaket unter den Pedalen, das donnernde Sub-Oktaven, expressive Hüllkurven und üppige Modulationseffekte mit erstklassigem Tracking und Sustain bietet – dazu alle Funktionen, die Sie benötigen, um jeden einzelnen Aspekt Ihres Klangs zu formen.

Designed with low-end professor and tone connoisseur Ian Martin Allison, the MXR Bass Synth is a powerhouse of a pedal offers thunderous sub-octave, expressive envelope, and lush modulation effects with killer tracking and sustain—plus all the features you need to shape every detail of your tone.

Demo by Nate Navarro

Review by No Treble

Bass Synth MB301

Chad Penfold

Ampero Press ist ein kompaktes, passives Lautstärke-/Expression-2-in-1-Pedal, das nicht nur zur Steuerung von Multieffekten der Ampero-Serie, sondern auch zur Steuerung anderer Musikgeräte (mit externen EXP-Pedalanschlüssen) oder zur Verwendung als passives Lautstärkepedal entwickelt wurde. Ampero Press verfügt über die DNA der Hotone Ampero-Linie: klassische schwarz-goldene Kleidung mit einem hochwertigen strukturierten Finish. Es verfügt über ein solides Gehäuse aus Aluminiumlegierung und bietet ein reibungsloses und komfortables Benutzererlebnis.

Ampero Press is a compact, passive volume/expression 2 in 1 pedal designed not only for controlling Ampero series multi-effects, but also for controlling other musical devices (with external EXP pedal jacks) or being used as a passive volume pedal. Ampero Press boasts the DNA of the Hotone Ampero line: classic black and gold attire with a high-end textured finish. It has solid aluminum alloy casing, smooth and comfortable user experience.

Review by Pedal of the Day

Demo by  Aaron Sopungco

Ampero Press

JakobSlash

POLYTUNE 3 NOIR is destined to become the favorite mini pedal tuner for those going for a darker, more monochromatic manner of expression. Sometimes you want to keep things understated, classical. The midnight black powder coating compliments the stylistically oriented pedalboard – while keeping your signal crisp and your tone in tune.