Brijesh Mishra

My Ultimate Bass Rig - KMA

Tester

In-DepThe heart of the pedal is still the same essential filter sections, which splits your signal into different loops with HIGH PASS and LOW PASS paths both filters have a 12 dB/oct. roll-off with a variable cut-off frequency from 20 Hz to 3 kHz). The rest of the vital tonal organs have had a thorough upgrade, which has resulted in an improved noise floor too. So, let’s dive into everything that makes this pedal DELUXE.


Since the original TYLER was also used as an advanced AB/Y box by many, it was found that ground loops could occur - no more with TYLER DELUXE! Both SENDs are now transformer coupled (with TRIAD Magnetics) to give you a nice and warm saturation, while avoiding ground-loops (internal slide-switched ground-lift). To be prepared for almost every situation and every pedal, both loops also got their own phase inversion switch (+/-) to get rid of potential unwanted phase cancelation.


The next new must-have feature is there to ensure the transparency of your setup and because we know it's important to you and to us, we added the good old CLEAN blend.

So far so good, but the deluxe delights don’t stop here! A master phase-switch ensures a fixed and reliable interaction with your set filter-frequency in every situation, no matter if you either have a loop engaged or not. But wait, for all of you who wants to follow TYLER's evolution, we added another claimed feature. The LP-CUT and HP-CUT switches will now mute your loops when bypassed, which will give you tons of new options to be creative, by only using the engaged loops without having clean artefacts pass through when disengaging one of the loops.

Modern times brings modern needs, so TYLER DELUXE is now equipped with relay-based soft-switches, an internal step-up to increase the headroom for hotter input signals and low-noise op-amps to improve the overall sound-quality and usability.

Some examples of use: Bass players want to retain their low end while using their favourite fuzz or dirt pedal. Insert your dirt box in the highpass FX-Loop and adjust the cut-off frequency of the High and Low Pass to your needs. Dial in your preferred ratio of those Low and High Pass signals, engage the STEEL footswitch and you will never turn off TYLER again! You can also insert different modulation pedals, for example insert a lush phaser for the lows and a nice shimmering delay for the highs and TYLER will make it sound like two different guitars are playing at once. Mix up your modulation pedals with any dirt pedals, for a very pronounced and punchy sound all coming from one amp.  If there ever was a Swiss army knife for your tone, then TYLER DELUXE must surely be it. So, fire up your frequency saw and start defining your own unique sonic path.

Powered by an optional standard 9V DC (max.) PSU (negative center, 2.1mm, approx. 100mA current draw)



KMA Machines

Product Page

Manual

Tyler Deluxe

Your Tone Must Flow, so Tame the Terror
“The earth, once so tranquil and serene, started to shake more ominously than ever beneath her feet. After centuries of scaring the living daylights out of the ancestors, the monster-of-malice was back. She looked up with an imperious glance and faced her destiny, her irradiant eye focusing unwaveringly on the venerable creature ahead. Suddenly, the earth stood still and there fell a deep silence. She had tamed the beast! She was the long-foreseen saviour, the GUARDIAN of the WURM“

Fusing together the powerful evolution of KMA’s highly regarded WURM Distortion with an intuitive, yet versatile and ultra-fast Noise Gate, GUARDIAN of the WURM is the perfect metal monster. From chugging hard-rock, droning doom metal and grinding Swedish death metal, the beast abides. But through its highly tweakable control set, the pedal can be tamed to provide impeccable clarity to your riffs, making this the definitive dirt pedal for metal, prog-rock, shoegaze, indie and beyond.

Review by delicious audio

Review by  musicradar

Manual download

Official Product Video

Demo by Trey Xavier 

Guardian Of The Wurm

Cadran Tulipe

Der SGT-DI™ Preamp und DI bietet modernen Bassisten ein komplettes Rig in einer einzigen Stompbox. Er bietet einen verbesserten Super Grit Technology™ Overdrive-Schaltkreis mit den kultigen Ampeg SVT®- und B15-Stimmen, einen vielseitigen 3-Band-EQ mit wählbarem Mid-Schaltkreis, Ultra-Hi- und 3-Wege-Ultra-Lo-Schalter, einen variablen Kompressor und eine Aux-/Kopfhörersektion. Plus! Der erste IR Loader/Cab Simulator von Ampeg. Wählen Sie aus drei klassischen Werksboxen oder bis zu drei eigenen Boxen, indem Sie die kostenlose Ampeg IR Loader-Anwendung verwenden.

The SGT-DI™ preamp and DI gives modern bassists an entire rig in a single stompbox. It delivers an enhanced Super Grit Technology™ overdrive circuit featuring iconic Ampeg SVT® and B15 voices, versatile 3-band EQ now with sweepable Mid circuit, Ultra-Hi and 3-way Ultra-Lo switches, a variable compressor, and an Aux /Headphone section. Plus! Introducing the first IR Loader/Cab Simulator from Ampeg. Choose from three classic factory cabs or up to three cabs of your own by using the free Ampeg IR Loader application.

Ampeg

Review by Guitar World

Review by Gitarre & Bass

Demo by  Nuno Correia - Bass

SGT-DI

Zixton Han

Nach jahrelanger Entwicklungsarbeit ist ENDGAME unsere bisher ambitionierteste Kreation. Als hochflexible und umfassende Lösung für das Ende Ihrer Signalkette ist es ein hervorragender Problemlöser und praktischer kreativer Begleiter.

Wir sprechen hier von einer Fülle von Funktionen! Mit einem integrierten Stereo-FX-Loop, KMAs proprietärem True Double-Tracker-Doubler, unserer eigenen DUAL-IR-Kabine mit Endstufensimulation, einem Aux-Eingang (auch über Bluetooth), echten XLR-Ausgängen auf Profi-Niveau und umfangreichen Routing-Optionen ist ENDGAME ein echtes Kraftpaket für dein Board, egal ob du als Fly-Rig auf Tour bist oder zu Hause mit Kopfhörern übst. Oh, haben wir schon Stereo erwähnt? Jetzt können Sie endlich alle Ihre Stereogeräte mit einem einzigen, einfach zu bedienenden und kompakten Produkt nutzen - lassen Sie die Alchemie beginnen!

After years of development work, ENDGAME is our most ambitious creation to date. A highly flexible and comprehensive solution for the end of your signal chain, it is a superb problem solver and convenient creative companion.

Talk about feature packed! With an integrated Stereo FX loop, KMA’s proprietary True Double-Tracker doubler, our own DUAL IR cab with power amp simulation, an Aux Input (also via Bluetooth), real pro-level XLR outputs and extensive routing options, ENDGAME really is a powerhouse for your board, whether touring as a fly rig or practicing at home with headphones. Oh, did we mention Stereo? Now you can finally use all your stereo devices with just one easy to use and compact product – let the alchemy begin!

Demo by EytschPi42

Endgame Duality Calibrator IR Cab Sim Pedal - Shadow edition

Laurin Weisensel

The Horizont’s mission is to push way beyond the classic phasing sounds of yesteryear, and take you to uncharted phaser worlds the second you plug in. By combining lush analog JFET phasing with digitally controlled dynamics, Horizont creates a vivid and expressive modulation experience, all while providing experimental and creative features that’ll kick phasing well into the 21st century.

Demo by Living Room GD

Demo by The Pedal Zone

Review by Pedal of the Day

Review by reddit /guitarpedals

Review by Ultimate Guitar

Review by AMAZONA

Horizont

Mit dem KMA Chief Disruptor schafft es ein neues Fuzz-Distortion-Pedal ins Portfolio der Berliner Boutique-Pedalschmiede. Als Vorbild dient mit dem Big Muff ein echter Klassiker des Gewerbes. Aber KMA wäre nicht KMA, wenn man dem Chief Disruptor nicht auch noch jede Menge Goodies unter der Haube eingepflanzt hätte. Worum es sich dabei handelt, wie der KMA Fuzz/Distortion performt und was seine größten Talente sind, wird dieser Test zeigen.

“Gazing from afar at the downfall of archaic sonic structures, a hooded being sat calmly on the cornerstone of legacy. For generations, instead of asking what the present actually screamed for, people had been blinded by the achievements of the past. That was before the CHIEF DISRUPTOR came along! All it took was the push of a single handle to tear down the ancient landmarks for good, not even passing a flinch as the explosion happened. Instead, a feeling of hope began to saturate the entire being, manifesting in an endlessly sustaining smile on their face. It’s finally time for a new era of crushing tones. It’s time for the age of the CHIEF DISRUPTOR"

Review by GEARNEWS 

Review by bonedo 

Demo by Patrick Hunter 

Demo by PMTVUK 

Demo by KMA Machines

Chief Disruptor

MOAI MAEA is KMA Machines’ homage to the powerful analog octaver tones of yesteryear. The pedal generates one higher octave and up to two sub-octaves, helping you create massive walls of synthy sound from a single note.

The MOAI MAEA’s upper octave section has an edgy and fuzzy character which is reminiscent of the iconic late ‘60s early ‘70s octave-up tones, as used by legends like Hendrix or The Stooges.
The sub-octave section turns your guitar into a filthy sub bass with ground shaking lows. Choose between either the first (-I), the second (-II) or both sub-octaves together (-I/-II), for an absolutely bone-breakingly heavy subsonic attack.

Demo by Eytschpi42

Moai Maea

“Floating above your head, delicate and elusive yet dreamy and sweeping. Always in motion until it dissolves and merges with the all immersive atmosphere around it. Just close your eyes and let the KMA Machines’ CIRRUS Delay and Reverb carry you across the open sky, onto its sonic cloudscapes.”

The CIRRUS Spatial-Temporal Modifier was KMA Machines’ first step into the fully digital realm. But we didn’t just want to do a regular and run-of-the-mill type of product. No, what we came up with is a truly special and versatile, dynamically modulated combined Delay and Reverb pedal that will forever change your perception of time and space.

Review by Sound on Sound

Demo by Rabea Massaad

Cirrus

Jarek Harek

KORG PitchBlack Poly polyphone Pedal Tuner - Ankundigung einen revolutionaren Fortschritt in der polyphonen Tuner, die Ihre Optimierungszeit verkurzen wird! Der Korg Pitchblack Poly ist der neue Standard in Gitarre und Bass pedal Tuner, mit dem exklusiven "String Seeker."

KORG PitchBlack Poly Polyphonic Pedal Tuner - Announcing a revolutionary advance in polyphonic tuners that will shorten your tuning time! Korg's pitchblack Poly is the new standard in guitar and bass pedal tuners, featuring the exclusive "String Seeker."

KORG

Demo by Luís Fernando Bassetto

Review by Premier Guitar

Review by The Gear Page

Review by Talk Bass.com

Pitchblack Poly PB03

Für 9-15 FX-Pedale, 1 MOD-Slot - **622 x 330 mm / 24.49" x 12.99"** - erhältlich mit Gig Bag oder Flight Case

For 9 - 15 FX pedals, 1 MOD slot - **622 x 330 mm / 24.49" x 12.99"** - available with Gig Bag or Flight Case

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 2 V2 wurde als Patchbay speziell für MIDI-basierte Setups, Verstärker und Geräte sowie eine USB-Verbindung zwischen Pedalboard und Computer oder Soundkarte entwickelt. Mit vier TRS-Through-Verbindungen lässt sich das MOD 2 V2 perfekt in True Stereo Setups von Keyboards oder Synthesizern integrieren oder als zentraler Zugang und Ausgang des Boards nutzen. Alternativ lassen sich Effektpedale im Front End und im Effekt-Loop des Verstärkers postieren (4-Kabel Methode).
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 4 x 6,3 mm TRS thru
- 2 x 5-pin DIN MIDI thru
- 1 x USB Type A thru
- 1 x DC 2,1 x 5,5 mm Hohlstecker thru
- 1 x AC IEC thru (männlich vorne / weiblich hinten)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 420 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 2 V2 is a pass-thru box especially designed for MIDI-controlled amplifiers and devices, USB connections to a computer, or a sound card. The 4x TRS thru connections will also work great for true stereo setups with keyboards or synthesizers. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 4 x 6,3 mm / ¼" TRS thru
- 2 x 5-pin DIN MIDI thru
- 1 x USB Type A thru
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 420 g / 0.93 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS, MIDI & USB Patchbay

My Current Bass Rig

The Ampeg® SCR-DI Bass DI with Scrambler Bass Overdrive is a full-featured Ampeg preamp that delivers a wide range of tones that are perfect for the studio or stage. The classic Ampeg EQ includes Ultra-Hi and Ultra-Lo filters, plus you can dial in the distinctive grind of overdriven tubes thanks to the Scrambler overdrive. With extensive I/O including a Phones output and Aux input, the SCR-DI is the perfect companion for every busy bass player that requires both great tone and flexibility.

Review by Bass Gear Magazine

Review by bonedo

Demo by Session

SCR DI

Electro-Harmonix

BassBalls Nano

PedalSafe Type A1.1

QuickMount Type A

Pedal-Montageplatte für Standard-Einzelpedale

Pedal Mounting Plate For Standard Single Pedals

Schutzabdeckung & RockBoard-Montageplatte für MXR® Standardgröße und Dunlop® Echoplex Delay Pedale

Protective Cover & RockBoard Mounting Plate For MXR® standard size and Dunlop® Echoplex Delay pedals

Schutzabdeckung & universelle Montageplatte für MXR® Standardgröße und Dunlop® Echoplex Delay Pedale

Protective Cover & Universal Mounting Plate For MXR® standard size and Dunlop® Echoplex Delay pedals

Die Kernschaltung des EHX Bass Clone Chorus Pedals ist nahezu identisch mit der des legendären Small Clone Chorus, aber mit zusätzlichen Funktionen speziell für Bass. Chorus ist eine Kombination aus modulierten und trockenen Signalen. Der Crossover-Schalter des Bass Clone schneidet die tiefen Frequenzen des modulierten Signals ab, so dass das Pedal ein präziseres, artikuliertes Basssignal mit exzellenter Tondefinition liefert. Der Treble-Regler beeinflusst das gesamte Signal, während der Bass-Regler nur die trockene Hälfte beeinflusst. Zusammen mit dem Crossover-Schalter sorgen sie für eine präzise Klangformung, mit der Sie einen straffen, fokussierten Bassgitarren-Sound mit gut definierten Bässen und einem schimmernden Chorus erzielen können.


The EHX Bass Clone Chorus pedal’s core circuitry is nearly identical to the legendary Small Clone chorus, but with added features especially for bass. Chorus is a combination of modulated and dry signals. The Bass Clone’s Crossover switch cuts low end from the modulated signal so the pedal delivers a more accurately articulated bottom end with excellent note definition. The Treble control affects the whole signal while the Bass control only affects the dry half. Together with the Crossover switch they provide precise sound shaping that lets you achieve a tight, focused bass guitar sound with a well-defined low end and shimmering chorus on top.

Demo by The Bass Channel

Review by reddit /basspedals

Review by musicradar

Review by bassic.de

Review by Premier Guitars

Bass Clone

PedalSafe Type A1

Schutzabdeckung & RockBoard-Montageplatte für Standard Single Pedale

Protective Cover & RockBoard Mounting Plate For Standard Single Pedals

Schutzabdeckung & universelle Montageplatte für Standard Single Pedale

Protective Cover & Universal Mounting Plate For Standard Single Pedals

David Litaba

GREEN RUSSIAN BIG MUFF PI

Für den Sub ‘N’ Up Octaver hat sich TC Electronic erneut mit dem legendären Effekt auseinandergesetzt und seinem neuen Schützling gleich drei zusätzliche Oktavlagen spendiert, die sich auch im polyphonen Spiel zum Signal hinzuaddieren lassen. Ursprünglich von Roger Mayer entwickelt und durch niemand geringeren als Jimi Hendrix berühmt gemacht, tauchte der Octaver als Effektgerät über die Jahrzehnte immer wieder im Sortiment verschiedener Hersteller auf.

SUB ‘N’ UP OCTAVER is the new leader of the pitch-pack. Featuring our superb next generation octave-engine and individual blend controls for dry, octave-up and two sub-octaves, SUB ‘N’ UP is set to deliver flawless octave tones whether you’re playing complex chords or groovy single-note lines

TC Electronic

Review by Bonedo 

Demo by Mike Hermans 

Demo by Pro Guitar Shop Demos 

Sub 'N' Up Octaver

RockBoard

POWER MOD ISO DC 1

Für 7-12 FX-Pedale, 1 MOD-Slot - **470 x 330 mm / 18.50" x 12.99"** - erhältlich mit Gig Bag oder Flight Case

For 7 - 12 FX pedals, 1 MOD slot - **470 x 330 mm / 18.50" x 12.99"** - available with Gig Bag or Flight Case

Thomas & Simone RhPf Electronics

Lenny, frontman of M.O.T.H.E.R. from Biel/Bienne, brings a sound that’s gritty, raw, and full of attitude. With punchy riffs and a voice to match, he builds his core tone by pushing his amp hard—no classic drive pedals needed. Instead, both EQs (BOSS GE-7 and MXR Ten Band) are used as powerful boosts, slamming the amp into that unmistakable, edge-of-breakup tube growl.

Central to his setup is the RhPf Electronics Tri-Hormonic Phalanx. Lenny sets the highs and lows for clean, focused boost, while the mids get dialed in for a crunchy, saturated bite. This lets him carve out punch and clarity, while the midrange cuts through with emotion and grit—never muddy, always bold.

Modulation and color come from the Orange Phaser, BOSS Harmonist, Multi Overtone, and Echoplex Delay, with the Hall of Fame 2 adding depth when needed. Power and routing are handled by the Truetone 1Spot Pro and Radial Catapult.

M.O.T.H.E.R.’s songs are all about storytelling with soul—sometimes chaotic, sometimes beautiful, always real. Lenny’s rig is built for that: flexible, dynamic, and ready to deliver every shade of feeling, from heartbreak to pure rock and roll joy.

M.O.T.H.E.R. - Lenny

BOSS

PS-6 Harmonist

PedalSafe Type E1

QuickMount Type E

Pedal-Montageplatte für Standard-Boss-Pedale

Pedal Mounting Plate For Standard Boss Pedals

Schutzabdeckung & RockBoard-Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & RockBoard Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Schutzabdeckung & universelle Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & Universal Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

MO-2 Multi Overtone

The Echoplex EP-3 tape echo unit is famous for its deliciously warm, organic modulation and sweet musical voice—a key component to some of the most iconic guitar tones from the '70s onward. The original EP-3 units, however, are expensive, temperamental, and larger than a VCR.

That's where the EP103 Echoplex Delay comes in. It's the size of a Phase 90, and it delivers the EP-3's legendary tones with a simple control interface and a hi-fi all-analog dry path. The Delay control sets the time between repeats—from 65ms to 750ms—the Sustain control sets the number of repeats, and the Volume control sets the output level of your repeats.

Dunlop

Review by Premierguitar

Demo by Guitarist

EP103 Echoplex Delay

Vincent  Raillard

TC ELECTRONIC ist ein Synonym für einige der bestklingenden Reverbs auf dem Markt - denken Sie an einen Song mit Hall, den Sie in den letzten 20 Jahren gehört haben, und die Wahrscheinlichkeit ist groß, dass er von uns stammt. Wir sprechen hier von Michael Jackson über Dire Straits bis hin zu Lady Gaga und zurück und allem, was dazwischen liegt. Wir haben die ikonischen Hallsounds, die du kennst und liebst, in einem kleinen Paket zusammengefasst, das einfach so wahnsinnig gut klingt, dass du es ausprobieren musst.

The original HALL OF FAME REVERB delivered some of the most-iconic reverb sounds of all time, but HALL OF FAME 2 REVERB extends that legacy of innovation dramatically. Essentially, HALL OF FAME 2 REVERB’s incredible MASH technology adds an expression pedal to a world-class reverb stompbox that not only responds to your touch and saves precious pedalboard space – but blends the celestial world of reverb with the ultimate in personal expression. Add a scintillating new Shimmer effect, and you've got a reverb pedal unlike any other – the awe-inspiring HALL OF FAME 2 REVERB!

The HALL OF FAME 2 REVERB features groundbreaking new technology that brings a wide range of creative expression to the party, controlled solely by how much pressure you apply to the depressed footswitch. Years in the making, and only available in select
TC ELECTRONIC products, this clever innovation elevates the common footswitch well above rather mundane duties, such as “On” and “Off”. More importantly – MASH elevates your performance to the next level.

Product Video 

Demo by TC Electronic 

Demo by Prymaxe 

Product Page 

Review by MIXDOWN 

Review by AMAZONA 

Hall of Fame 2

PedalSafe Type G

QuickMount Type G 

Pedal-Montageplatte für Standard TC Electronic Pedale

Pedal Mounting Plate For Standard TC Electronic Pedals

Schutzabdeckung & RockBoard Montageplatte für Standard TC Electronic Pedale

Protective Cover & RockBoard Mounting Plate For Standard TC Electronic Pedals

Schutzabdeckung & universelle Montageplatte für Standard TC Electronic Pedale

Protective Cover & Universal Mounting Plate For Standard TC Electronic Pedals

Hartwig Rohde

IT LITERALLY HAS ONE JOB

When you have a specific job that needs doing, the solution is obvious: you hire a specialist. And when you want to add a classic phaser effect to your sound, it’s the same deal: you want a pedal that does exactly that, and only that. No muss, no fuss, no superfluous bells and whistles — and, crucially, zero intrusions on that sweet psychedelic swirl.

Orange

Demo by GUITARGUITAR

Review by Guitar.com

Manual Page

Vintage Phaser

Filippo Rimondi

Truetone

Visual Sound 1 Spot Pro CS12

Luciano Saracino

Das Catapult Mini System funktioniert wie ein typisches analoges Vierkanal-Audio-Snake; es ermöglicht die Übertragung von Mikrofon- oder Line-Pegel-Signalen von einem Ort zum anderen ohne Signalverlust, Rauschen oder Interferenzen und ohne dass eine digitale Audioumwandlung erforderlich ist. Das Besondere am Catapult-System ist, dass es Cat 5-Ethernet-Kabel verwendet, die weithin verfügbar, leicht und kostengünstig sind. Schließen Sie einfach ein abgeschirmtes Cat 5-Kabel zwischen zwei beliebigen Catapult-Modulen an, und die Module nutzen die analogen Leiter im Kabel, um vier symmetrische Audioleitungen an ein beliebiges Ziel zu liefern.

The Catapult Mini System works like a typical four-channel analog audio snake; they allow you to send mic or line-level signals from one location to another without signal loss, noise, or interference, and without any digital audio conversion needed. What makes the Catapult system unique is that it utilizes Cat 5 Ethernet cable, which is widely available, lightweight, and economical. Simply connect a shielded Cat 5 cable between any two Catapult modules and they will use the analog conductors in the cable to deliver four balanced audio lines to any destination.

Radial Engineering

Demo by Scott Uhl

Demo by DaleProAudio

Review by Gearspace

Review by Church Production

Catapult Mini TX

Ein paralleler 3-Band-Enhancer mit unabhängigem Gain- und Level-Setup für Bässe, Mitten und Höhen. Der Tri-Hormonic Phalanx formt jede Frequenz separat – mit Klarheit und Kontrolle. Verleihe deinem Sound Druck im Bass, Präsenz in den Mitten oder Glanz in den Höhen, ohne Überschneidungen. Für transparente Klangformung oder gezielte Sättigung – immer phasenstabil, immer musikalisch.

A parallel 3-band enhancer with independent gain and level controls for lows, mids, and highs. The Tri-Hormonic Phalanx lets you shape each frequency band separately—add grit to the mids, shimmer to the highs, or body to the lows, all without overlap. Whether for clean sculpting or stacked harmonic saturation, it delivers clarity, power, and phase-coherent balance.

RhPf Electronics

3D Viewer and AR tool

Interactive Frequency Response

Interactive Demo

Tri-Hormonic Phalanx

The MXR Ten Band Graphic EQ gives players
huge amounts of tone shaping and level control
in a bullet-proof enclosure. This pedal has
been upgraded with noise-reduction circuitry,
true bypass switching, a lightweight aluminum
housing, and a second output so you can run two
separate signal chains. With ten carefully chosen
frequencies and both input and output level
controls, the Ten Band EQ will let you tune your
bass or guitar rig to any room in seconds. 

Review by

Demo by PMTVUK

M108S 10 band EQ [silver version]

QuickMount Type D

Pedal-Montageplatte für große horizontale Pedale

Pedal Mounting Plate For Large Horizontal Pedals

JakobSlash

Das GE-7 Equalizer-Pedal bietet sieben EQ-Bänder im Bereich von 100Hz bis 6,4kHz, ideal für Gitarrensounds, mit einer Anhebung/Absenkung von +/- 15dB pro Band. Damit kannst du deinen Sound vollständig kontrollieren und unerwünschte Rückkopplungen eliminieren, insbesondere wenn du ihn nach einem Verzerrungseffekt anschließt.

The GE-7 Equalizer pedal offers seven bands of EQ ranging from 100Hz to 6.4kHz, ideal for guitar sounds, with boost/cut of +/- 15dB per band. This lets you completely control your sound and eliminate unwanted feedback, particularly when connected after a distortion effect.

Official Website

Review by The Gear Check

Review by Audiofanzine

Review by Reddit /guitarpedals

Review by Guitar Gear

Demo by Law of the Riff

Demo by New Music Academy

Demo by Guitar Bonedo

Demo by Musicmaker

GE-7 Equalizer

先生 林

stratocaster

Sandbox Pedal Board-copy

ac10

thr10

Phil Treu

150 built-in programs for DJ mixes and sound design
In addition to the effect programs that were so
popular on the KP3, such as a filter that's designed with an analog feel in mind, standard spatial-type effects such as a highly usable delay, a grain shifter that lets you freeze an instant of sound, and a decimator, we've added an enhanced looper as well as new effects.
You can connect a mic to the mic input jack
and generate full-fledged vocoder sounds in
real time. An "FX RELEASE" feature has been
provided which lets you control the reverberant
tail of the effect to obtain a more natural decay,
ensuring that these powerful effects will blend
naturally into your song or performance