andronik supersonik

Die RockBoard® MOD 5 Cab SIM + DI Patchbay bietet wählbare, IR-basierte Stereo-Lautsprecher Simulation, eine aktive DI-Box, sowie eine einfache Lösung, um alle Verbindungen zu und von deinem Effekt Setup zu organisieren. Egal, ob du ein RockBoard® oder ein anderes Pedalboard einer anderen Marke verwendest - die MOD 5 eröffnet völlig neue Möglichkeiten. Mit der Speaker-Cab-Simulation und DI kannst du direkt loslegen und hast DEINEN Sound parat, unabhängig davon, welche Backline an der jeweiligen Venue zur Verfügung steht. Du möchtest deine persönliche Lieblings-Cabinet benutzen? Kein Problem, lade eine Impulse Response des Sounds in die MOD 5 und du hast sie überall dabei. Der Patchbay-Teil dient dazu, Verbindungen von unterhalb deines Pedalboards nach vorne zu leiten, um dir einen zentralen Zugangspunkt zu deinem Setup zu geben und deinen Kabelsalat aufzuräumen. Für geräuschloses Üben auf der Straße bietet der MOD 5 auch einen Kopfhörerverstärker mit einstellbarer Ausgangslautstärke.
- Cabinet Simulation & DI Patchbay
- IR basierte Lautsprecher Simulation
- 6 integrierte IRs wählbar
- Unterstützung von zusätzlichen Custom IRs (max. 1024 pts.)
- integrierte aktive DI Box
- Kopfhöhrer Verstärker
- passend für MOD Slots in RockBoard® Pedalboards
- kompatibel mit einer weiten Reihe anderer Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- wählbarer MONO / STEREO Input
- wählbarer UN- / BALANCED Output
- Ground Lift Schalter
- Regler für Phones Volume
- 3 x 6,3 mm TRS Thru
- XLR DI Out
- 6.3 mm Parallel TRS Output
- 3.5 mm Stereo Kopfhöhrer Ausgang mit einstellbarer Lautstärke
- micro USB Anschluss für Firmware Updates und zum Hochladen von Custom IRs
- Stromversorgung via optionalem 9V DC Netzteil, 2.1 x 5.5 mm Hohlstecker, Polarität (-) innen
- Stromaufnahme 300 mA
- Batteriebetrieb nicht unterstützt
- Abmessungen mit Frontplatte (B x T x H) 175 x 85 x 47 mm 
- Abmessungen ohne Frontplatte (B x T x H) 160 x 85 x 33 mm
- Gewicht 470 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The RockBoard® MOD 5 Cab SIM + DI Patchbay offers customizable, IR-based stereo speaker cabinet simulation, an active DI box, as well as a simple solution to organize all the connections to and from your effects setup. Whether you are using a RockBoard® or any other brand pedalboard - the MOD 5 will open completely new possibilities. The speaker cab simulation & DI let's you go direct, providing YOUR sound, whatever backline is being provided at the venue you're playing. Do you want to use your favorite cab? No problem, load an impulse response of its sound into the MOD 5 and you have it with you, wherever you go. The patchbay part is designed to route connections from underneath your pedalboard to its front, in order to give you a central access point to your setup and tidy up your connections. For silent and on the road practicing, the MOD 5 also provides a headphone amplifier with adjustable output volume.
- cabinet simulation & DI patchbay
- IR-based speaker cabinet simulation
- 6 integrated IRs selectable
- support of additional Custom IRs (max. 1024 pts.)
- integrated active DI box
- headphone amplifier
- fits MOD slots in RockBoard® pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- selectable MONO / STEREO input
- selectable UN / BALANCED output
- ground lift switch
- control for Phones Volume
- 3 x 6.3 mm / ¼" TRS thru
- XLR DI Out
- 6.3 mm / ¼" Parallel TRS output
- 3.5 mm / 1/8" stereo headphone output with adjustable volume
- micro USB connection for firmware updates and loading custom IRs
- power supply via optional 9V DC power adapter, 2.1 x 5.5 mm barrel plug, polarity (-) center
- current draw 300 mA
- battery operation not supported
- dimensions with front plate (W x D x H) 175 x 85 x 47 mm / 6 57/64" x 3 11/32" x 1 27/32" 
- dimensions without front plate (W x D x H) 160 x 85 x 33 mm / 6 19/64" x 3 11/32" x 1 19/64"
- weight 470 g / 1.04 lbs.
- incl. mounting screws, counter nuts, and TX wrench

Cab SIM + DI Patchbay

GUITAR 4.1 ok

Roland Schmidt

Die RockBoard QuickMount Pick Box ist ein hilfreiches Zubehör für Musiker, die alles an einem Ort aufbewahren möchten. Nie wieder verlorene Plektren oder verschwundenes Zubehör! Dank des QuickMount-Systems benötigst du kein klebriges Velcro mehr, die Pick Box lässt sich fest und sicher in das RockBoard Slot Grid klemmen.

The RockBoard QuickMount PickBox is a useful accessory for musicians who want to keep everything in one place. No more lost picks or missing accessories! Thanks to the QuickMount system, you no longer need sticky hook & loop tape. The PickBox snaps securely into the RockBoard slot grid.

RockBoard

RockBoard PickBox

PickBox

Tester

BOSS

MT-2W Metal Zone (Waza Craft)

PedalSafe Type E1

QuickMount Type E

Pedal-Montageplatte für Standard-Boss-Pedale

Pedal Mounting Plate For Standard Boss Pedals

Schutzabdeckung & RockBoard-Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & RockBoard Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Schutzabdeckung & universelle Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & Universal Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Die wohl beste Geheimwaffe, von der du wahrscheinlich noch nicht wusstest, dass du sie brauchst! Gerade wir Pedal-Nerds laufen Gefahr unseren Sound mit endlosen Pedalketten in den Ruin zu treiben. Der Feind heißt Kapazität, ein Problem das bei zu langen Kabelwegen undn ich zuletzt schlechten Schaltungen auftritt und das Signal High End kostet und es schwach und charakterlos klingen lässt. Ein Trugschluss, der dies noch unterstützt is die Annahme dass True Bypass immer gut ist, denn ganz stimmt dies leider nicht. Der Little Black Buffer kommt genau hier ins Spiel und versorgt dein Rig mit genau der richtigen Eingangsimpedanz, damit du am Ende einen klaren, natürlichen Sound hast, der klingt als hättest du dich direkt in den Amp gestöpselt.

This may be the greatest weapon you didn’t know you needed. For those of us who are a little “pedal happy” there can be some downfall to our tone. When running a pedal board with more than one or two effects, something called “capacitance” happens. This natural problem happens due to the amount of cable or line that your signal has to travel through, not to mention bad switching systems in certain pedals. The result is a very audible amount of high-end loss, weak signal, flabby bass and uncharacteristic pickup behavior in guitars. Another problem is the assumption that all “true bypass” is good. This isn’t true and actually can be worse than imagined. This is where the “Little Black Buffer” steps in providing the perfect input impedance to your rig and giving you the final result of clear, natural tone that sounds like you're plugged straight into your amp.

Official Product Page

Manual

Little Black Buffer

QuickMount Type UV

Universal-Pedal-Montageplatte für vertikale Pedale

Universal Pedal Mounting Plate For Vertical Pedals

The 529i features 2 x 500mA and 6 x 300mA 9V fully isolated outputs. With a 500mA load, the 529i will power your pedalboard for 4 hours on a single charge, longer when using most low-power analog pedals. Recharge using the included 12V power supply, or from a USB charger.

Mission Engineering

Product Page

Review by Gigs and Guitars

Review by Sound on Sound

Quick Start Guide

Demo by Sean Pierce Johnson

Demo by EytschPi42

529i USB Power Supply

JakobSlash

Das GE-7 Equalizer-Pedal bietet sieben EQ-Bänder im Bereich von 100Hz bis 6,4kHz, ideal für Gitarrensounds, mit einer Anhebung/Absenkung von +/- 15dB pro Band. Damit kannst du deinen Sound vollständig kontrollieren und unerwünschte Rückkopplungen eliminieren, insbesondere wenn du ihn nach einem Verzerrungseffekt anschließt.

The GE-7 Equalizer pedal offers seven bands of EQ ranging from 100Hz to 6.4kHz, ideal for guitar sounds, with boost/cut of +/- 15dB per band. This lets you completely control your sound and eliminate unwanted feedback, particularly when connected after a distortion effect.

Official Website

Review by The Gear Check

Review by Audiofanzine

Review by Reddit /guitarpedals

Review by Guitar Gear

Demo by Law of the Riff

Demo by New Music Academy

Demo by Guitar Bonedo

Demo by Musicmaker

GE-7 Equalizer

The Snow White Autowah (SWAW) circuit is based on a 1991 BJF rack mount remote wah circuit and is tuned like a real wah. The circuit was redesigned with envelope controls and built into small size pedal. It has very fast tracking and accuracy rarely found on auto wahs/ envelope filters. With the four knobs, you can have total control of the effect. SWAW works both with guitar and bass and you can fine-tune the pedal to suit your instrument, your playing style and your taste of tone.
The pedal has a unique decay control for the filter frequency fall speed. You can set it to be fast for wah effects on every note, or slower for a more traditional auto wah sound.

Mad Professor Amplification

Review by bonedo

Demo by ProGuitarShopDemos

Official Product Video

Snow White AutoWah

PedalSafe Type A1.1

QuickMount Type A

Pedal-Montageplatte für Standard-Einzelpedale

Pedal Mounting Plate For Standard Single Pedals

Schutzabdeckung & RockBoard-Montageplatte für MXR® Standardgröße und Dunlop® Echoplex Delay Pedale

Protective Cover & RockBoard Mounting Plate For MXR® standard size and Dunlop® Echoplex Delay pedals

Schutzabdeckung & universelle Montageplatte für MXR® Standardgröße und Dunlop® Echoplex Delay Pedale

Protective Cover & Universal Mounting Plate For MXR® standard size and Dunlop® Echoplex Delay pedals

With the TU-3W, BOSS brings Waza Craft mojo to the world’s leading stompbox tuner. At its core, the TU-3W provides rock-solid tuning equivalent to the industry-standard TU-3. In true Waza tradition, the pedal’s benchmark functionality is further enhanced with BOSS skill and craftsmanship. Pure, uncolored signal transfer is essential for a tuner, and the TU-3W features redesigned circuitry with selectable buffered or true-bypass operation and the most transparent audio pass-through possible. Packing high-end performance for discriminating players, the TU-3W delivers a premium pedal experience only available from BOSS.

TU-3W Tuner

maurizio palumbo

BP-1W Booster/Preamp

Isp Technologies

Deci-Mate

David Litaba

The MXR Deep Phase Pedal delivers uniquely expressive vintage phaser tones with the impeccable build quality and tweakabiity that MXR is famous for.

Unique vintage voice.
Based on an iconic vintage circuit, the sound of the Deep Phase Pedal is crystal clear with a pronounced swoosh, scooped midrange, and a dynamic, voice-like response to your attack. Whether you're digging in for fat, fluid chords or gently evoking tranquil textured melodies, this pedal will adapt to your playing intensity. It plays very well with the low end of the spectrum, too, so it sounds incredible on bass. While the original suffered from a serious volume drop when engaged, the Deep Phase Pedal has been carefully designed to match your level when you kick the switch.

From smooth and subtle to turbulent and intense.
With just two knobs and a switch, the Deep Phase Pedal offers a wide range of phase tones, from subtle liquid shifting to thick, swirling turbulence. The Speed knob adjusts the effect rate, while the FDBK knob adjusts the intensity and sharpness of the phase peaks. By default, the Deep Phase Pedal runs on 4 phase shifter stages for a smooth effect. The Mode II switch doubles that to 8 stages for twice the number of peaks and a more animated texture. 

Demo by Wil Blades

Official Product Video - Josh Paul

Official Product Video - James Deprato

M279 Deep Phase

Hast du jemals die sonaren Wellen eines alten Fender-Blackface oder Vox-Amp Tremolos geritten? Dann weißt du, dass diese Tones das Gefühl geben auf einer Millionen-Dollar-Yacht zu segeln. Das Tidewater Tremolo stellt dieses beliebten Tremolo Sounds mit Wärme und Charakter originalgetreu nach, wie man sie nur von einem Vintage-Amp erwarten würde. Mit einfachen Bedienelementen und einem geringen Fußabdruck am Pedalboard fährst du mit dem Tidewater Tremolo auf hoher See. Wenn du ein einfaches Amp-ähnliches Tremolo suchst, das nicht viel Platz beansprucht, ist das Tidewater Tremolo das Mittel der Wahl.

Have you ever ridden the sonic waves of a vintage Fender blackface or Vox tremolo flowing like water from the speaker?  Then you know that this kind of tone can make you feel like you’re sailing on a million dollar yacht.  The Tidewater Tremolo faithfully recreates this beloved amp tremolo with a warmth and character you would only expect from a vintage amp. With simple controls and a small footprint, you’ll be sailing the high seas of tone with the Tidewater Tremolo. When you want a simple amp-like tremolo that doesn’t take up much space, the Tidewater Tremolo is your vessel of choice.

JHS Tidewater - Demo by Living Room

Tidewater trem - Demo by Mike Hermans

JHS Mini Foot Fuzz V2 & JHS Tidewater Tremolo - Review by Gitarre & Bass [DE], [09-2019]

Tidewater Tremolo

PedalSafe Type L

QuickMount Type L

Pedal-Montageplatte für Standard-Mini-Pedale

Pedal Mounting Plate For Standard Mini Pedals

Schutzabdeckung & RockBoard-Montageplatte für MXR, PIGTRONIX, XOTIC, XVIVE und viele weitere Pedale mit Mini Gehäusen

Protective Cover & RockBoard Mounting Plate For MXR, PIGTRONIX , XOTIC, XVIVE and many other effect pedals in mini enclosures 

Schutzabdeckung & universelle Montageplatte für MXR, PIGTRONIX, XOTIC, XVIVE und viele weitere Pedale mit Mini Gehäusen

Protective Cover & Universal Mounting Plate For MXR, PIGTRONIX , XOTIC, XVIVE and many other effect pedals in mini enclosures 

The Carl Martin Headroom is the most simple to operate reverb pedal on the market…with a couple extras. This purely analogue ‘real spring’ reverb has two identical identical channels, each with tone and level controls to select the depth and tone of your reverb. This allows you to have a soft, small room reverb on Channel A and a much more dramatic and dark large-room reverb on Channel B (or vise versa) The two foot-controlled switches control which channel you are in, and whether you wish to bypass the effect completely. It is like having two separate reverbs in your amp!

Carl Martin

Review by musicradar

Demo by Pete Thorn

Demo by VintageandRare

Headroom

M299 Carbon Copy Mini Delay

DC-2W Dimension C (Waza Craft)

Der SP Compressor hat eine hervorragende Klangqualität und bietet eine große Auswahl an Kompressor-Sounds von Vintage über subtil bis hin zu modern.
 
Er ist sehr flexibel und verfügt über einen Dry-Blend-Regler, bis zu +15 dB Boost und einen internen Dip-Schalter zur Attack-Steuerung.

The SP Compressor has superb tone quality featuring a wide variety of compressor tones from vintage, to subtle, to modern and more.

It’s super flexible and features a dry blend knob, up to +15dB of boost and an internal dip switch for attack control.

Xotic

SP Compressor

Famous for its woody, organic and beautiful sounds of saturation, these legendary British amplifiers, the Super Lead &amp; Super Bass, have been delivering one of the all-time classic sounds for almost 50 years. Players like Jimmy Page, Paul Kossoff and countless other relied on this type of tone for their signature sound. Xotic has recreated this vintage masterpiece in a rugged small enclosure. The SL Drive offers very amp-like response and cleans up nicely with a roll of your guitar’s volume knob. The internal dip switches allow you to choose the sound characteristics of both 1959 models. The “Super Lead” setting offers a brighter tone with more gain, while the “Super Bass” setting has more low end with less highs. This compact design is a powerful tool for the working musicians.

Demo by Guitarist

SL Drive

What do the tones of renowned guitarist such as Page, EVH and Johnson have in common? They all used the legendary echo machine EP-3 as a pre-amp. We've captured that magic in a new Xotic Effects pedal, the EP Booster. We've used the highest quality parts available with a discrete FET design and low impedance output, the EP Booster provides up to +20dB of unadulterated boost with multi-dimensional, shimmering highs and lows, and no ear fatigue. The internal DIP switches let you choose the boost frequencies, and EQ settings. A simple pure boost that pays reverence to the magical EP-3 and captures the celebrated tones of the world's most famous players. The EP-Booster,great tone starts here !

Demo by Mike Hermans

EP Booster

Now in an MXR mini housing, the Classic 108 Fuzz gives you all the same vintage fuzz tones in a much smaller footprint. Like its larger predecessor, it's loaded with the silicon BC-108 transistor for a round and dirty crunch. This Classic 108 Fuzz also has the same no-nonsense control interface—just crank the Volume and Fuzz controls to your liking and start riffing. Use the Buffer switch on the side to make the fuzz play nice with wah pedals.

Demo by Eric Merrow

Demo byGuitarristas

M296 Classic 108 Fuzz Mini

Für 7-12 FX-Pedale, 1 MOD-Slot - **470 x 330 mm / 18.50" x 12.99"** - erhältlich mit Gig Bag oder Flight Case

For 7 - 12 FX pedals, 1 MOD slot - **470 x 330 mm / 18.50" x 12.99"** - available with Gig Bag or Flight Case

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 1 V2 ist eine Pass-Through-Box, die speziell für Gitarristen und Bassisten entwickelt wurde. Du kannst das MOD 1 V2 nutzen um mehrere Pedale deines Setups im Front End und im Effekt-Loop des Verstärkers zu postieren (4-Kabel Methode) oder die vier TRS-Anschlüsse als zentralen Zugang und Ausgang des Boards nutzen. Die XLR-Through-Verbindung kann als Signalausgang vom Pedalboard zum Mischpult oder zur PA verwendet werden.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 5 x 6,3 mm TRS thru
- 1 x XLR thru (männlich vorne / weiblich hinten)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 5 x 6,3 mm / ¼" TRS thru
- 1 x XLR thru (male front / female back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR, IEC & Barrel Patchbay

amplified nation wonderland overdrive v2 combo board-copy

nathan gallegos

Frisch aus unserer Custom‐Werkstatt bietet dieses 2‐in‐1‐Multi‐Pedal eine Kombination aus JAM pedals Klassikern, die die meisten deiner Modulationsbedürfnisse abdecken und gleichzeitig Platz für neue, aufregende Sounds schaffen!

Harmonische Tremolo-, Amplitude‐Tremolo-, Chorus‐ und Vibrato‐Effekte, die gemeinsam auf deinem Board tanzen!

Fresh from our custom shop, this 2-in-1 multipedal features a couple of JAM pedals favorites that will cover most of your modulation needs as well as provide an exploration platform for new and exciting sounds!

Harmonic tremolo, amplitude tremolo, chorus and vibrato harmoniously waltzing on your board! 

Jam Pedals

Harmonious Fall

Pablo Scarpa

Nachdem das Wahcko jahrelang auf vielen Profi-Boards vertreten war und viel Lob und Auszeichnungen erhalten hat, hat es sich als das lautstärkste, ausdrucksstärkste und gleichzeitig vielseitigste Wah-Pedal auf dem Markt etabliert.

Das Wahcko verfügt über ein pufferloses, proprietäres Schaltungsdesign, das den problemlosen Anschluss impedanzempfindlicher Pedale, wie z. B. Germanium-Fuzzboxen, an das Wahcko ermöglicht.

After years of appearing as a mainstay on many pros’ boards and earning its fair share of praise and awards, the Wahcko has established itself as the most vocal, expressive and at the same time versatile wah pedal out there.

The Wahcko features a bufferless proprietary circuit design that allows for impedance sensitive pedals, like germanium fuzz boxes to be placed after the Wahcko with no issues!

Demo by intheblues

Review by The Gear Page

Review by Sam Goffen Guitar

Review by reddit /guitarpedals

Wahcko

Branislav Vukobratovic

Die Cioks DC7 Mehrfach-Stromversorgung für Effektpedale stellt im Vergleich zu anderen Geräten dieser Art jeder Menge Energie bereit. Und das in einem flachen Gehäuse, das sogar unter ein Pedaltrain Nano Board passt. Das stattliche Kraftwerk bietet laut Angaben des dänischen Herstellers bei 9 Volt massive 4620 mA Strom und wäre damit rein rechnerisch in der Lage, ca. 577 Tubescreamer-Pedale (!) in Betrieb zu halten.

If you use effects pedals, whether on stage or in the studio, running them from a high-quality power supply is essential to getting the best performance and lowest noise out of them. The best power supplies have regulated, electrically isolated outputs, and that gives the same electrical separation as when running the pedals from batteries — but without the obvious disadvantages! There are several excellent power supplies available that offer such features, but CIOKS have managed to come up with an incredibly compact solution, seemingly without compromising on quality or flexibility.

CIOKS

Demo by The Pedal Zone 

Demo by CIOKS 

Review by

Review by bonedo 

DC 7

The Replicator D’Luxe is a sum up from all the knowledge, we have built up over the years, making
Tape delays.
it is a 2 head machine. The drive mechanism has been updated with a noiseless belt drive. A tape lock/release mechanism is added, to make the pinch wheel and tape last longer and electronics has been tuned to perfection.

T-Rex

Demo by Martin Klaja's Guitarchannel

Demo by Duskmos

Demo by T-Rex Effects

Review by GEOFF KING, mixdownmag.com.au

Replicator D'LUXE

Fusion, eine relativ neue Musikrichtung, die Jazz und Rock, besonders den technischen "Shredder"-Stil der 80er Jahre, verbindet, hat Tom Quayle als eine seiner führenden Figuren. Trotz seines tiefen theoretischen Wissens fand Tom lange keinen passenden Effektpedal. Nach einer Zusammenarbeit mit Wampler Pedals im Jahr 2012 wurde das Dual Fusion entwickelt, mit zwei modifizierten Schaltkreisen aus dem Euphoria und Paisley Drive. Es bietet Klarheit, Kontrolle und einen Verstärker-ähnlichen Sound und spricht Gitarristen verschiedener Genres an.

Fusion, a relatively new genre blending jazz and rock, particularly the technical "shredder" style from the 80s, has Tom Quayle as one of its leading figures. Known for his deep theoretical knowledge and unique playing style, Tom struggled to find a pedal that matched his needs. After collaborating with Wampler Pedals in 2012, they developed the Dual Fusion pedal. It features two modified circuits from the Euphoria and Paisley Drive, designed to give Tom clarity, control, and amp-like response when stacked. The Dual Fusion has become a versatile tool for modern fusion guitarists and appeals to players of all genres.

Wampler

Review by guitarplanet.eu

Review by musicradar.com

Review by guitarfella.com

Review by guitarinteractivemagazine.com

Demo by Har Maes

Demo by  Brett Kingman

Demo by  David Wallimann

Dual Fusion

Für 7-12 FX-Pedale, 1 MOD-Slot - **598 x 236 mm / 23.54" x 9.29"** - erhältlich mit Gig Bag oder Flight Case

For 7 - 12 FX pedals, 1 MOD slot - **598 x 236 mm / 23.54" x 9.29"** - available with Gig Bag or Flight Case

amplified nation wonderland overdrive v2 combo board S

Jimmy  Cooper

CIOKS 4 Expander is the perfect companion to CIOKS DC7 in case you would like four additional outlets with four selectable voltages on each tap (9, 12, 15 and 18V DC) which can each deliver 660mA at 9V DC. Simply connect CIOKS 4 Expander to your CIOKS DC7 via the courtesy 24V outlet and you are good to go.

But that is definitely not all – what makes CIOKS 4 Expander truly unique is the fact that you can power it with anything from 9V to 24V DC or 9V to 12V AC via the non-polarized DC socket input. Furthermore CIOKS 4 can even be powered by connecting it to a USB powerbank via its 5V USB C input or by using a tablet or laptop power supply with a USB C plug. This flexibility means that you can use CIOKS 4 Expander as a stand-alone unit and power it with almost any adapter including the 1-SPOT or GigRig Generator. You can also use the 24V output on a Strymon Zuma unit to power the CIOKS 4 Expander. It can also convert an unused AC outlet on your existing power supply into 4 isolated DC outlets. 

Review by KVR Audio

Review by Talk Bass.com

It's a much, much smaller than the ST-1 at only 3.9" wide x 4" deep, and more intelligent version of the epic Supa-Trem1. Sporting True-Bypass,Tap-Tempo, external Tap jack, Half/Double hold feature, up to 15dB boost, true Square, Sine, and the natural heartbeat-like Warble wave-forms! It also can do speeds so slow that a full cycle takes around 10 seconds, and fast speeds beyond 220bpm. The heart of the ST-1 is still there, the warm Analog Devices JFET preamp. And this pedal is so small it will fit in your pocket, and with its top-mounted jacks, will fit in any little spot on your board. Don't forget, just like the ST-1, the Jr also works as an incredible clean boost with the Mix control turned down!

Fulltone

Demo by PJ and the Beard

Review by Gearnews

Supa-Trem Jr

Cited as a major influence by wah masters such as Hendrix, Clapton, and Vaughn, Buddy Guy helped establish the effect as part of the blues vocabulary. To honor his contributions we have created the Buddy Guy Cry Baby Wah, featuring the Fasel Inductor for a sweet and singing top end, and two distinct user selectable wah voices—choose "DEEP" for a big and throaty growl, or "BG" for Buddy's own warm and bell-like wah tone. Convenient side-mounted LEDs indicate which mode you are in, while a separate LED indicates effect on/off. Let your guitar sing the blues in style with the Buddy-approved polka dot graphics and custom signature tread.

Dunlop

Review by Simon Bradley, musicradar.com

Demo by Guitar World

BG95 Buddy Guy Crybaby Wah

QuickMount Type M

Pedal-Montageplatte für Dunlop Cry Baby Wah-Pedale

Pedal Mounting Plates For Dunlop Cry Baby Wah Pedals

Cameron Taylor

The CopperSound Passive ABY pedal is a simple and handy utility device designed to split one input into two separate outputs, or combine two separate inputs into one output. Being a Bi-directional Passive device, its applications are only limited by your imagination! Use it to run and organize your stereo rig, switch between two instruments on the fly, or even as a mute switch for silent instrument changes. To make connections simple, the footswitch washers are color-coordinated to their corresponding output jack. Since this ABY is a passive device, power is only required for the status LEDs.

Coppersound

Passive ABY Switcher

Dark Riff

This board is designed for a guitarist who needs a tight, powerful high-gain tone, a transparent or slightly pushed clean tone, and lush atmospheric effects. Every pedal is chosen to keep the signal strong, defined, and flexible for any setup - amps or mixers.

The guitar signal enters the RockBoard MOD 5 (Cab SIM + DI) first, then flows into the JHS Little Black Buffer, keeping the tone consistent and strong from the very start of the chain.

Then the Digitech Drop handles tuning shifts, followed by the TC Polytune 3 Noir to always show the actual tuned pitch after the Drop.

The Dunlop KH95 Wah is routed directly into the RockBoard MOD 5, providing expressive wah control without extra patching.

A gentle squeeze comes from the MXR Super Comp, and the TC Electronic Sentry noise gate keeps all high-gain stages perfectly quiet.

The drive path begins with the Boss SD-1, adding a focused boost and tightening the front of the tone. The signal then moves into the Boss JB-2, which serves as a light or medium overdrive. After that, the chain reaches the high-gain section controlled by the One Control True Bypass Looper: when activated, the JHS Buffered Splitter feeds both the Seymour Duncan Palladium and the Friedman BE-OD in parallel, and the JHS Summing Amp blends their outputs into a single, powerful signal. This setup provides a wide, detailed modern distortion whenever needed, while the JB-2 remains the lighter, more dynamic gain option earlier in the chain.

From there, the chain goes into the Mesa Boogie 5-Band Graphic EQ for precision shaping before the ambience block: Boss RV-6 provides spacious reverb textures. After the RV-6, the signal goes into the JHS Mute Switch - a simple, instant kill function to cut all sound immediately after the reverb. It mutes the main output for quick, clean signal stops when playing into a single amp or mixer.

Power comes from the isolated MXR Mini Iso-Brick, with quick power access via the RockBoard Mini Mounting MOD DC, all mounted on the RockBoard QUAD 4.1.

This board delivers crushing gain, transparent or slightly pushed clean tones, and reverb-based ambience - all while keeping noise low and signal quality high. Every pedal has a specific role, and together they create a flexible, modern, and studio-grade guitar rig.

Dark Main Guitar Board (V1)

Matthis LEMONNIER

The DigiTech® Drop is a dedicated polyphonic drop tune pedal that allows you to drop your tuning from one semitone all the way down to a full octave. Get down-tuned chunk without having to change guitars! The Drop also features a momentary/latching switch. With the switch set to momentary, you can turn the Drop into a true performance pedal. Fast trills and roller-coaster pitch dips are at the tip of your

DigiTech

Demo by Agufish

Demo by Reinaldo Lopez

Review by Guitar Gear Finder

Drop

QuickMount Type B

Zur Feier des 40-jährigen Jubiläums der BOSS-Compact-Pedale haben sich BOSS und JHS Pedals zu einer historischen kreativen Zusammenarbeit zweier Branchenführer zusammengeschlossen. Untergebracht im klassischen BOSS-Compact-Design vereint das JB-2 Angry Driver die Sounds des legendären BOSS BD-2 Blues Driver mit dem beliebten Angry Charlie von JHS Pedals. In enger Zusammenarbeit entwickelten die beiden Pedalhersteller eine völlig neue kombinierte Schaltung mit optimiertem Sound und perfekter Abstimmung für den Dual-Mode-Overdrive-Betrieb.

Das JB-2 Angry Driver verfügt über drei Doppelpotis, die eine unabhängige Regelung von Drive, Tone und Level für jede der beiden Overdrive-Schaltungen ermöglichen. Über einen Sechsfach-Drehschalter lassen sich die beiden Overdrives einzeln oder kombiniert in Serien- oder Parallelbetrieb nutzen. Durch die Möglichkeit, den expressiven Low-to-Mid-Gain-Sound des Blues Driver mit der aggressiven Rock-Stimme des Angry Charlie in jeder erdenklichen Kombination zu mischen, bietet das JB-2 Angry Driver eine enorme Bandbreite und Vielseitigkeit in einem einzigen Overdrive-Pedal.

To celebrate the 40th anniversary of BOSS compact pedals, BOSS and JHS Pedals have come together in a historic creative collaboration between the two industry leaders. Housed in the classic BOSS compact design, the JB-2 Angry Driver pairs the tones of the iconic BOSS BD-2 Blues Driver with JHS Pedals’ popular Angry Charlie. Working closely together, the two pedal innovators have developed an all-new combined circuit with refined sound and performance perfectly tuned for dual-mode drive operation.

The JB-2 Angry Driver features three dual-concentric knobs that provide independent drive, tone, and level control for each overdrive type. Via a six-position mode selector, you can use each overdrive independently or combine them in series and parallel configurations. With the ability to blend the Blues Driver’s famously expressive low-to-mid gain tones with the Angry Charlie’s aggressive rock voice in any combination, the JB-2 Angry Driver delivers unmatched range and versatility from a single overdrive pedal.