charlie day

Thunderbird 

Das RockBoard MOD 4 - All-in-One Wireless System Receiver + Patchbay für Pedalboards bietet eine einfach zu realisierende, kabellose Verbindung zwischen deinem Instrument und deinem Pedalboard. Dabei nutzt es eine digitale Wireless Technologie, die eine beeindruckende Klangqualität, ein einfaches Setup und eine zuverlässige Nutzung für aktive Musiker garantiert. Das Wireless System arbeitet im 2,4 GHz ISM Band und kann so weltweit ohne Beschränkungen genutzt werden. Mit einem nutzbaren Frequenzbereich von 20 Hz - 20 kHz und nur 5 ms Latenz bleiben keine Wünsche offen. Die Patchbay-Sektion wurde entwickelt um Verbindungen und Anschlüsse des Pedalboards von der Unterseite nach außen zu führen, dir einen zentralen Zugangspunkt zu deinem Setup zur Verfügung zu stellen und um deine Kabelwege aufzuräumen und sortieren zu können. Die A, B, C und D TRS Buchsen sind als direkte, durchgängige Verbindungen von der Vorderseite des MOD 4 zu den entsprechenden Buchsen auf der Rückseite verkabelt. Damit kannst du deine Effekt-Kette so einrichten, dass du bei der Vorbereitung auf den Gig lediglich Kabel an der Vorderseite des Boards einstecken musst, anstatt unter dem Board zu hantieren.
- Wireless System Receiver + Patchbay für Pedalboards, inkl. Wireless Transmitter
- 2,4 GHz ISM Band für weltweite Nutzung
- 30 m durchschnittliche Reichweite (ohne Hindernisse)
- 24 bit / 48 kHz unkomprimierte digitale Signalübertragung
- 20 Hz - 20 kHz Frequenzbereich
- 5 ms Latenz
- 103 dB Dynamikbereich
- 85 dBm HF-Empfindlichkeit
- 0.2% Verzerrung (THD)
- 4 wählbare Kanäle
- passend für MOD Slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe anderer Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 4x 6,3 mm Stereo-Klinke Thru (TRS)
- 1x 6,3 mm Mono-Klinke Receiver Audio Ausgang (TS)
- 1x DC 2,1 x 5,5 mm Hohlstecker Thru
- 1x AC IEC Thru
- 1x USB Type A Charge Ausgang
- Stromversorgung via optionalem 9V DC Netzteil, 2.1 x 5.5 mm Hohlstecker, Polarität (-) innen
- Batteriebetrieb nicht unterstützt
- Stromaufnahme 500 mA
- passiver Betrieb möglich (nur Patchbay, ohne Wireless System)
- Abmessungen mit Frontplatte (B x T x H): 175 x 85 x 47 mm
- Abmessungen ohne Frontplatte (B x T x H): 160 x 85 x 33 mm
- Gewicht 500 g
- Wireless Transmitter, zwei Antennen, ein USB Kabel, Montageschrauben und Muttern im Lieferumfang enthalten

The RockBoard MOD 4 - All-in-One Wireless System Receiver + Patchbay for Pedalboards offers an easy-to-use wireless connection between your instrument and your pedalboard, featuring digital wireless technology that delivers incredible audio quality, a simple setup procedure, and reliable use for any gigging musician. The wireless system works in the 2.4 GHz ISM band for unlimited worldwide use and offers a full 20 Hz - 20 kHz frequency range with only 5 ms of latency. The patchbay module is designed to route connections from underneath your pedalboard to its front, giving you a central access point and tidying up your connections. The A, B, C, and D TRS sockets are wiring thru-connections from the front of MOD 4 to the corresponding sockets on the back. This allows you to connect your pedals permanently underneath the board, so you only have to connect cables to and from the front of the board, instead of having to route underneath it when setting it up for a gig.
- wireless system receiver + patchbay for pedalboards, incl. wireless transmitter
- compatible with guitar wireless system
- 2.4 GHz ISM band for worldwide use
- 30 m / 100 ft. approx. range (without obstacles)
- 24-bit / 48 kHz uncompressed digital transmission
- 20 Hz - 20 kHz frequency range
- 5 ms latency
- 103 dB dynamic range
- 85 dBm RF sensitivity
- 0.2% total harmonic distortion
- 4 selectable channels
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- detachable front plate for mounting on top or underneath pedalboards
- 4x 6.3 mm / 1/4" stereo thru (TRS)
- 1x 6.3 mm / 1/4" mono receiver audio output (TS)
- 1x DC 2.1 x 5.5 mm barrel thru
- 1x AC IEC thru
- 1x USB Type A charge output
- power supply via optional 9V DC power adapter, 2.1 x 5.5 mm barrel plug, polarity (-) center
- battery operation not supported
- current draw 500 mA
- passive operation possible (patchbay only, without wireless system)
- dimensions with front plate (W x D x H) 175 x 85 x 47 mm / 6 57/64" x 3 11/32" x 1 27/32" 
- dimensions without front plate (W x D x H) 160 x 85 x 33 mm / 6 19/64" x 3 11/32" x 1 19/64"
- weight 500 g / 1.1 lbs
- incl. wireless transmitter, two antennas, USB charging cable, mounting screws, and counter nuts

2.4 GHz Guitar Wireless Receiver, Transmitter + TRS Patchbay

New Pedal Board

ABM600

Tuwi Yuwi

The Lucydreamer is a Dry / Wet overdrive created with today’s bass masters’ needs and wants in mind.

It packs the following functions / features:

Dry / Wet Mix control

High-gain-stage footswitch which doesn’t affect the dry signal’s level

Internal trimmer to set the high-gain stage’s output level

Its overdrive circuit can track every little nuance of your playing with a wide gain-stage spectrum, ranging from highly dynamic tube-amp-like break-up, all the way to full- bodied high-gain saturation!

Owing its clipping merits to our “secret” chip, the Lucydreamer fluently tackles all the traditional tasks of an overdrive pedal and at the same time invites you to discover new ways of bonding with your bass lines!

Widen your palette of sounds, minimize pedalboard real estate and elevate your tone with the Lucydreamer!

Jam Pedals

Review by reddit /basspedals

Product Page

Manual

Demo by Zachary Rizer

Demo by Patrick Hunter

Demo by Nate Navarro

Demo by BassTheWorld.com

LucyDreamer Bass

PedalSafe Type B3

QuickMount Type B1

Pedal-Montageplatte für FRIEDMAN, KEELEY Halo, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD, Jupiter V2 Pedale, Mooer GL 100

Pedal Mounting Plate for FRIEDMAN, KEELEY Halo, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD, Jupiter V2 pedals, Mooer GL 100

Schutzabdeckung & RockBoard-Montageplatte für WALRUS MAKKO D1 Pedale

Protective Cover & RockBoard Mounting Plate For WALRUS MAKKO D1 pedals

Schutzabdeckung & universelle Montageplatte für WALRUS MAKKO D1 Pedale

Protective Cover & Universal Mounting Plate For WALRUS MAKKO D1 pedals

Tester

JAM pedals’ unabashed distortion monster. We pulled out all the stops to make sure the Rattler will get you all the amazing tones of great early 80s ProCo RAT® distortion boxes and put in the time and R&D to make it more responsive to your playing resulting in an open, dynamic, overdriven tube-amp feel!

Its symmetrical clipping circuit and of course the legendary LM308 chip, the featured star of this design, are the main ingredients of a great recipe resulting in the Rattler shining through any rig, whether modern or vintage.

Enjoy fat and creamy distortion courtesy of the devious snake!

Demo by Chris Kollias

Demo by BassTheWorld

Rattler Bass

Christian Wistl

Bass is the bedrock of your band, and the Two Notes ReVolt Bass's all-analog signal path, complete with a 12AX7 preamp tube — run at a healthy 200V — ensures a stand-out sound in any application. The ReVolt Bass's three channels deliver the full gamut of tones, from high-headroom cleans to old-school dirt to modern drive. You also get an integrated Dry/Wet blend for extra tone-shaping power. An analog speaker simulation ensures a polished, miked-cab sound, both onstage and in the studio. Integrating the ReVolt Bass with the rest of your rig is a cinch, thanks to a 4-cable mode, an FX loop, and MIDI I/O. This bass preamp pedal also includes a collection of ten DynIRs for situations where you need more DI flexibility. Bassists searching for a robust, made-to-move solution for their pedalboards and fly rigs will get tons of mileage out of the Two Notes ReVolt Bass.

Two Notes Audio Engineering

Review by Sound on Sound

Review by bonedo

Demo by Sweetwater

Official Product Video

ReVolt Bass

The upgraded version of the Vintage Deluxe features the warm, tube-like tones of the Microtubes Vintage and adds a 4-band active EQ, Low and High mid frequency switch, parallel output and balanced line driver. It delivers the natural dynamic response and organic compression of classic tube amps and tape machines, fitting four decades of legendary tones into a package that will fit in your gig bag.

darkglass 

Demo by Musicmaker

Review by reddit /Bass

Manual Pages

Vintage deluxe V3

Featuring the largest tuning display Peterson Tuners has ever incorporated into one of their pedal tuners, the StroboStomp HD boasts a high-definition, LCD screen that incorporates a variable color LED backlight. The user-selectable colors can be used to personalize the tuner or to increase display viewing quality in different levels of ambient lighting depending on the usage environment. The vibrant screen colors can also be assigned to stock or user presets to significantly reduce menu navigation time and increase on-stage tuning confidence at the gig.

Peterson

Review by Gitarre & Bass

Demo by The Time Preservation Society

Demo by EytschPi42

Demo by TalkingBass

Review by The Gear PAge

Review by TDPRI

Review by reddit /guitarpedals

StroboStomp HD

Danielo Olivera

Das Volume (X) Mini-Pedal steuert Lautstärke und Effektparameter, ohne Ihr Pedalboard zu überladen. Es verfügt über ein leichtes Aluminiumgehäuse, ein aggressives, rutschfestes Profil und unser patentiertes Low Friction Band-Drive für einen reibungslosen Bewegungsbereich und eine gleichbleibende, zuverlässige Leistung. Für maximalen Komfort und Präzision ist die Wippspannung des DVP4 vollständig einstellbar.

The Volume (X) Mini Pedal controls volume and FX parameters without crowding your pedalboard, featuring a lightweight aluminum chassis, aggressive non-slip tread, and our patented Low Friction Band-Drive for a smooth range of motion and consistent, reliable performance. For maximum comfort and precision, the DVP4's rocker tension is fully adjustable.

Dunlop

Volume X Mini Pedal DVP4

ch ray

Wenn Sie mehrere Gitarren mit unterschiedlichen Pegeln verwenden, können Sie mit TheGigRig Three2One V2 mühelos zwischen ihnen wechseln und die integrierten Vorverstärker verwenden, um die Pegel auszugleichen. Außerdem können Sie das Signal von der verwendeten Gitarre an den Tuner-Ausgang senden, um es auf der Bühne geräuschlos zu stimmen.

Der GigRig Three2One-Gitarrenwähler verfügt über drei Eingänge. Sie können jetzt problemlos zwischen 1-3 Gitarren oder sogar Line-Pegel-Eingängen wie Keyboards oder Drumcomputern wechseln!

If you use multiple guitars with varying levels, TheGigRig Three2One V2 allows you to switch effortlessly between them and use the built in preamps to balance the levels as well as sending the signal from whatever guitar you're using to the Tuner Out for silent on-stage tuning.

The GigRig Three2One guitar selector features three inputs. You can now switch easily between 1-3 guitars or even line level inputs such as a keyboards or drum machines! 

GigRig

Review by musicradar

Review by The Gear Page

Three2One V2

Das TC Electronic Sentry nimmt sich als Noisegate-Pedal den Problemen an, von denen vor allem Singlecoil-Spieler sowie Hard- und Heavy-Gitarristen ein Lied singen können. Die Rede ist natürlich von unerwünschten Nebengeräuschen, die gern in Form von Einstreuungen oder stärkerem Rauschen auftreten und uns das Leben schwer machen.

The TC Electronic Sentry is a noisegate pedal that addresses the problems that single-coil players and hard and heavy guitarists in particular can tell you a thing or two about. Of course, we're talking about unwanted noise, which often occurs in the form of interference or stronger noise and makes life difficult for us.

TC Electronic

Review by Bonedo 

Demo by Science of Loud

Sentry Noise Gate

QuickMount Type G 

Pedal-Montageplatte für Standard TC Electronic Pedale

Pedal Mounting Plate For Standard TC Electronic Pedals

Lee-Ping Jiang

And the party does not stop …Ever!!!
Essential to keeping the groove moving is bass. Lots and lots of bass.
Can’t have too much, just not possible.
And from this universal truth the Octatron was born.
Bringing one million years of cosmic funk into a compact pedal capable of creating the eternal groove.
All analog, all the time.
From deep dub to smooth grooves, the Octatron is the magical box for all things bass.

Seamoon FX

Review by Bass Gear Mag

Demo by Premier Guitar

Demo by the wetter bass

Octatron

Der MXR Bass Chorus Deluxe basiert auf reiner analoger Bucket-Brigade-Technologie, die schimmernde, flüssige Chorus- und rauschende, metallische Flanger-Effekte liefert und dabei den Punch und das Fundament deines Low Ends bewahrt.

Der Bass Chorus Deluxe verfügt über Flanger- und X-Over-Tasten auf der Oberseite mit LED-Statusanzeigen. Im X-Over-Modus wird die Modulation in den tiefen Frequenzen auf 100 Hz abgesenkt - perfekt für das Spielen von Akkorden, Melodien und Fills in den oberen Registern, während die tiefen Frequenzen in der richtigen Stimmung bleiben. Mit den Reglern für Bass und Treble können Sie die Tiefen und Höhen absenken oder anheben und den Klangcharakter des Effekts gestalten. Für einen breiten Stereosound können Sie über einen internen Schalter den TRS (Tip-Ring-Sleeve) Stereo Hardwire Bypass Mode wählen. In diesem Modus können Sie ein TRS-auf-TS-(Tip-Sleeve)-Y-Verteilerkabel verwenden, um das Effektsignal an zwei verschiedene Verstärker zu senden, so dass die Modulation von links nach rechts wandern kann.

The MXR Bass Chorus Deluxe is powered by pure analog bucket-brigade technology, serving up shimmering, liquid chorus and swooshing, metallic flanger effects while preserving the punch and fundamental of your low end.

The Bass Chorus Deluxe features top-mounted Flanger and X-Over buttons with LED status indicators. In X-Over Mode, modulation in low frequencies is decreased at 100Hz—perfect for playing upper register chords, melodies and fills while keeping the low end in tune. With Bass and Treble controls you can cut or boost lows and highs and shape the tonal character of the effect. For a wide stereo sound, select the TRS (tip-ring-sleeve) Stereo Hardwire Bypass Mode via an internal switch. In this mode, you can use a TRS to TS (tip-sleeve) Y-splitter cable to send the effect signal to two different amplifiers, allowing the modulation to move from left to right.

Demo by The Bass Channel

Review by Premier Guitar

Review by Basschat

Review by Talk Bass.com

Review by Bonedo

M83 Bass Chorus Deluxe

Dieses Pedal kombiniert den satten Klang des Harmonic Booster mit der Präzision einer Parallelkompression mit einstellbarem Frequenzbereich und bietet Ihnen unübertroffene Kontrolle. Mit einem 6-Band-EQ, einer Pegelreduzierungsanzeige und der Option, 7 benutzerdefinierte Impulsantworten über USB zu laden, bietet es ultimative Klangflexibilität für Bassisten aller Genres. Pur, kraftvoll und präzise – Ihr sauberer Ton, perfektioniert.

Combining the rich tone of the Harmonic Booster with the precision of an adjustable frequency range parallel compression, this pedal gives you unmatched control. With a 6-band EQ, gain reduction meter, and the option to load 7 custom Impulse Responses via USB, it delivers ultimate tonal flexibility for bass players of any genre. Pure, powerful, and precise—your clean tone, perfected.

Darkglass Electronics

Demo by IvanBassist

Review by No Treble

Review by sinusoidal music

Review by Bass Musician Mag

Review by gearnews.de

Manual Page

Luminal Booster Ultra

RockBoard

ISO Power Block V12 IEC

Für 9-15 FX-Pedale, 1 MOD-Slot - **622 x 330 mm / 24.49" x 12.99"** - erhältlich mit Gig Bag oder Flight Case

For 9 - 15 FX pedals, 1 MOD slot - **622 x 330 mm / 24.49" x 12.99"** - available with Gig Bag or Flight Case

Paulo Marques

Can a pedalboard be a all-in-one for practice at home, band rehearsal, gigs, and studio?

- Inputs for 3 bass guitars (4, 5, and 6 strings) into GigRig
- GigRig > Tuner > Compressor
- Signal from Compressor split into Capo and Darkglass
- Signal from Capo and Darkglass merged into switcher
- Switcher > Parametric EQ > Noisegate > Simplifier
- Simplifier Thru output > Thumpinator > Canvas Rehearsal > Ashdown Ant
- Simplifier DI out to FOH/Studio
- Simplifier FX Loop > Polymoon > Ottobit > Ampero > Noise Gate
- Simplifier Parallel FX Loop > Loop Stat

(Thumpinator, Noise Gate and Ashdown Ant hidden under the board)


SR506E-BM, Performer 5, RBX1000 

DIGITAL+ANALOG Bass Pedal Board

HyDrive HD112

Das robuste und dennoch tragbare Design liefert echte 200 W RMS (200 W an 4 Ohm (110 W an 8 Ohm – 60 W an 16 Ohm)) mit erstklassiger Tonklarheit und einem unglaublichen Sustain wie bei jedem anderen Class-D-Verstärker. Freuen Sie sich auf Funktionen wie einen integrierten, von Baroni-Lab entwickelten Kompressor, einen Lautsprecherausgang und eine integrierte DI-Anlage.

Schließen Sie den Verstärker an einen beliebigen Verstärker der Baroni-Lab Mini Amp-Serie an und lassen Sie sich positiv überraschen. Die Qualität, Zuverlässigkeit und Leistung dieser funktionsreichen Verstärker in Pedalgröße sind wirklich erstaunlich – kein Hype.

The hearty, yet portable design, provides a true 200w RMS (200W @4 Ohm (110W@8Ohm – 60W@ 16Ohm) with quality note clarity and an incredible sustain like any other Class D amp. Enjoy features like a built-in Baroni-Lab engineered compressor, speaker out and a built in DI.

Plug into any of the Baroni-Lab Mini Amp Series amps and look forward to being pleasantly surprised. The quality, reliability and performance wrapped into these feature-rich, pedal sized amps is truly astounding, no hype.

Baroni Lab

Demo by Ryan's Custom Shop and Gear Outlet

Demo by  Ariel G Kaplan

Bass Amp 200

David Litaba

G8’s controls will let you dial in that sliced & diced metal rhythm tone when you need it - but most importantly it is designed to maintain the sonic integrity of your guitar tone. You will feel the same & sound the same all you’ll be wondering is where the noise went. Hear the silence!

REVV

Review by

Review by delicious audio

Review by Gear Gods

Demo by Trey Xavier

G8 Noise Gate

Brian  Nilton

Ampero Mini ist der bisher kleinste Vertreter der Ampero-Familie und bietet Ihnen kompromisslosen Ampero-Sound in einem ultrakompakten Aluminiumgehäuse. Es verfügt über das Wesentliche der atemberaubenden Ampero-Effektausrüstung mit IR-Unterstützung von Drittanbietern. Die integrierten wichtigen I/O-Buchsen sind mehr als ausreichend für den täglichen Gebrauch, der Touchscreen und die intuitive Benutzeroberfläche sorgen für ein reibungsloses, unkompliziertes Erlebnis auf einem minimalen Gehäuse. Ampero Mini bietet Ihnen ein hervorragendes Preis-Leistungs-Verhältnis, insbesondere für Spieler, die den Ampero-Klang erleben möchten, Einsteiger mit kleinem Budget, Session-Musiker, die sowohl eine ultrakompakte Größe als auch einen professionellen Klang benötigen, und sogar erfahrene Amp-Modeler-Spieler.

Every version of the Ampero family of Amp Modelers and Effects Processors from our friends at Hotone Audio has come our way, and we’re exctied as always to bring you the latest version today. The Ampero MINI takes everything you know and love about these units and squishes them into a small, compact enclosure, perfect for any pedalboard or tabletop rig. And since there’s no compromise in sound quality or endless IRs, effects, routing, tuning, looping and more, this is one powerful little processor that will BLOW. YOUR. MIND.

HOTONE

Review by GEARNEWS 

Review by pedal of the day 

Demo by Ninecore Niel 

Demo by Andertons 

AMPERO MINI (vanilla)

Julien Poireau

The Canvas Rehearsal is your all-in-one rehearsal tool. Designed for musicians who use effect pedals, you can listen to your instrument through headphones, play with tracks via Bluetooth or 1/8” auxiliary input, and practice with a built-in metronome. The Canvas Rehearsal is the perfect end-of-chain solution when your gig requires your practice to become perfection.

Walrus Audio

Review by Guitar World

Canvas Rehearsal

The micro-Thumpinator is a bandwidth optimizer designed for bass guitar. It removes the low frequency signals that are outside the range of notes produced by the instrument.

Infrasonic frequencies cannot be reproduced by standard bass cabinets but they often make amplifiers clip, especially when they are set to boost the lower frequencies. The Thumpinator filters the signal content optimising the energy delivered by the amplifier. Low-frequency clip is substantially reduced and the sound is tighter especially at high volume levels.

The micro-Thumpinator accepts instrument and line level signals. It can be used between preamplifier and amplifier, between bass and amplifier or anywhere in the effect chain (line or instrument level). It can also be connected directly to an audio interface.

SFX Sound

Demo by Paul Reich

micro-Thumpinator v2

Elod Bajrami

Altoids

BOSS

Demo by PMTV UK

Review by Sound Crunch

RC-5 Loop Station

PedalSafe Type E1

QuickMount Type E

Pedal-Montageplatte für Standard-Boss-Pedale

Pedal Mounting Plate For Standard Boss Pedals

Schutzabdeckung & RockBoard-Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & RockBoard Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Schutzabdeckung & universelle Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & Universal Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Ideal zum Aufteilen Ihres Gitarrensignals auf zwei Verstärker oder zum Üben mit einem Freund auf zwei Gitarren an einem Verstärker.

Great for splitting your guitar signal between 2 amps or practice 2 guitars with a friend into 1 amplifier.

LOOPI

Demo by Metal Prognosis 

Y Splitter/Combiner

Tim Rilke

The new DSM & Humboldt SIMPLIFIER BASS STATION is everything you ever needed to go direct to the FOH or recording amazing bass tones without sacrificing anything.  It includes a Bass Preamp with gain, level, and a 3 band EQ with semi-parametric mid control. A parallel signal routing with a selectable LPF, dual FX loop (for preamp and parallel signal), and an amazing analog cabinet simulation, based on the acclaimed Omnicabsim ® by DSM Noisemaker.

DSM & Humboldt

Demo by benjudbass

Demo by Diego Ibarra

Demo by Bass Bonedo

Simplifier Bass Station

Pulling out the lead from your guitar while your amp is on to change guitars creates that horrible "popping" sound. use this sweet little box, hook up both guitars, one switch, and you'll never need to worry about popping again. And remember, all our pedals our hard metal, Made for the stage!. This can be used for 2 guitars into 1 amp, or 1 guitar into 2 amps (and lot of other combinations) . Please note this is not an ABY pedal so you can't run both amps at the one time.

Belcat

Demo by Musocity

Demo by Medium Rare Musicians

ABS-522 (A-B BOX)

FTelettronica

3 Band Parametric Equalizer

Wir haben unser Alpha·Omega genommen und mit unermüdlicher Anstrengung all unsere erlernten Ingenieurkenntnisse darin verarbeitet. Indem wir die legendäre Verzerrungsschaltung in ein neues Paradigma einfügten, eröffneten wir eine Reihe von Möglichkeiten, die vorher nicht verfügbar waren.

We took our Alpha·Omega, and with relentless efforts added all the learned engineering to it. Placing the iconic distortion circuit into a new paradigm enables a range of possibilities that were never before available.

Demo by  BassTheWorld.com

Review by Rainer Wind, bonedo.de

Review by Joris Henke, gitarrebass.de

Alpha Omega Photon

Nicolas Wilfer

Arguably the most important pedal on your board, the Canvas Tuner ensures that your instrument is ready to sound its best with the perfect meld of versatility and precision. The Canvas Tuner ensures that you have the most accurate brush to paint your sonic picture.

Video Manual

Official Product Video 

Canvas Tuner

QuickMount Type A

Pedal-Montageplatte für Standard-Einzelpedale

Pedal Mounting Plate For Standard Single Pedals

Der Meris Ottobit Jr. lässt Videospiel Träume wahr werden!
Er bringt eine Ära, die uns silikzium-basierte Sounds ins Gedächtnis gebrannt hat wieder zurück und direkt auf dein Pedalboard. Angelo von Meris wurde gefragt ob er einen Filter designen könne um die harscheren Bitcrush Sounds etwas zu zähmen. Und verdammt, klingt dieser Filter geil... fast wie ein analoger Synth. Aus diesem Pedal kannst du eine unendliche Vielzahl an coolen Sounds kitzeln, was die Entscheidung MIDI und Presets mit unter die Haube zu packen. Ihn einfach einen Bitcrusher zu nennen ist fast schon eine Beleidigung. Der getriggerte Stutter und Pitch/Filter/Crush Sequencer nehmen dich mit auf eine Video-Spiel Reise voller Side-Scrolling, Münzensammeln und Labyrinth-Welten. Füge den Resonant Low-Pass Filter hinzu, den nicht viel von analogen Synths trennt und Opa SID wäre stolz. Du willst Games? Der Ottobit Jr. gibt dir Games

The Meris Ottobit Jr. is arcade dreams reborn! It brings an era when silicon defined sonics that were burned in our memory for years back to live and directly to your pedalboard. Angelo of Meris was asked to design a filter to tame the harsher bitcrush settings. And damn, that filter sounds good… almost like an analog synth. There is an infinite amount of cool sounds you can get out of this pedal, so that’s what drove the decision to add MIDI and presets under the hood. To call it a bitcrusher would be an insult. The triggered stutter and pitch/filter/crush sequencers take you to side scrolling, coin collecting maze worlds. Add in a resonant low pass filter that competes with the best analog synths and would make grandpa SID proud. You want games? The Ottobit Jr. will give you games!

Meris

Official Product Page

Meris Ottobit Jr. - Demo Video - Pedal Empire

Meris Ottobit Jr. - Demo Video - The SuperFunAwesomeHappyTime Pedal Show!

Meris Ottobit Jr. - Demo Video - PedalsAndEffects

Meris Ottobit Jr. - Demo Video - Vintage King

Review by AMAZONA

Review by Tape OP

Ottobit JR

Designt um die Anforderungen von Studio- und Liveanwendungen zu übertreffen, ist der Meris Polymoon ein Super-Moduliertes Multiples Tap Delay. Ausgestattet mit 24 Bit A/D & D/A Wandlern, 32 Bit Fließkomma DSP und einem analogen Signalpfad bietet es absolute Kontrolle über Bypass und Trails und der digital gesteuerte, analoge Signalweg des Polymoon erlaubt einen organisch klingenden Wet-Dry Mix. Schon immer davon fasziniert, wie Giganten wie Holdsworth und Zappa ihre Rack Delays an die Grenzen brachten, hat Meris das Polymoon mit kaskadierenden Rack Delays im Kopf designt. Schließe es an und lasse dich auf unendliche inspirierende Reisen durch mathematischen Traumlandschaften mitnehmen.

Designed to surpass requirements for studio and live use and the Meris Polymoon is being dubbed Super-Modulated Multiple Tap Delay. It not only features 24 bit A/D & D/A converters, 32 bit floating point DSP hardware and an analog signal path, it also gives you absolute control about bypass and trails. The Polymoon’s digitally controlled analogue dry path allowing for the most natural sounding wet/dry mix possible. Always mesmerized by giants like Holdsworth and Zappa that would push their rack delays to the limit, Meris designed the Polymoon with multiple cascading rack delays in mind as a tribute to those iconic echo sounds. Plug in the Meris Polymoon and let it take you on endlessly inspiring journeys in an mathematical dream state!

Polymoon

Three2One V2 by GigRig