Kuba Furman

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 1 V2 ist eine Pass-Through-Box, die speziell für Gitarristen und Bassisten entwickelt wurde. Du kannst das MOD 1 V2 nutzen um mehrere Pedale deines Setups im Front End und im Effekt-Loop des Verstärkers zu postieren (4-Kabel Methode) oder die vier TRS-Anschlüsse als zentralen Zugang und Ausgang des Boards nutzen. Die XLR-Through-Verbindung kann als Signalausgang vom Pedalboard zum Mischpult oder zur PA verwendet werden.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 5 x 6,3 mm TRS thru
- 1 x XLR thru (männlich vorne / weiblich hinten)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 5 x 6,3 mm / ¼" TRS thru
- 1 x XLR thru (male front / female back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR, IEC & Barrel Patchbay

3 drives bass board

Clock

Digital clock

Max Ruppelt

The Microtubes X Ultra greatly expands on the already immense versatility of the Microtubes X7. Featuring all the great controls that its predecessor has that allows users to select exactly what frequencies they want to compress and saturate for the low and treble respectively, but with four major additions providing an additional layer of flexibility, while maintaining the same compact footprint, making it an extremely complete tool for the modern bassist.

Darkglass Electronics

Manual

Demo by The Bass Channel

Official Product Video

Product Page

Review by Mike Brooks, guitarworld.com

Review by Rainer Wind, bonedo.de

Microtubes X Ultra

Alex  Wilkins

When we released our original Compressor back in 2011, it quickly became a favourite among guitar and bass players alike who were searching for something more than the typical oversimplified controls found on most compressor pedals. Although our original Compressor sounded great on bass (and still does!) we set out to do even better. 
On top of the full range of features and controls normally only seen in high end studio equipment, such as input and gain reduction metering, independent attack and release controls, a mix knob for parallel compression, and an external sidechain insert, we’ve now added a fully variable sidechain high pass filter, and a two position ‘tone + colour’ circuit which adds gentle tone sculpting and harmonic distortion, giving your bass some delicious character.  

Empress Effects

Review by bassic

Review by CompressorPedalReviews

Demo by Pertybass

Demo by BassTheWorld.com

Bass Compressor Blue Sparkle

Tester

Line 6 HX Stomp Red Limited Edition ist ein professioneller Gitarrenprozessor, der den Klang von Helix-Verstärkern, -Boxen und -Effekten in einem ultrakompakten Pedal liefert. Egal, ob Sie lieber ein traditionelles Amp-and-Pedal-Setup spielen oder direkt auf die Bühne oder ins Studio gehen, HX Stomp lässt sich nahtlos in eine Vielzahl von Umgebungen und Anwendungen integrieren. Das HX Stomp-Gitarrenpedal verwendet dieselbe DSP- und HX-Modellierungstechnologie wie seine größeren Helix-Brüder und passt dennoch problemlos auf Ihr Pedalboard oder sogar in die Tasche Ihres Gigbags. Es gibt über 300 Ampere, Kabinen und Effekte – einschließlich eines Loopers. HX Stomp enthält dieselben HX-Modelle wie die Produkte der Helix-Familie sowie die Legacy-Effektbibliothek der Line 6 M-Series-Pedale und Stompbox-Modellierer wie den DL4. Verwenden Sie es als "Super-Stompbox", als Backup- oder Travel-Rig, als zusätzlichen Tonexpander in Kombination mit anderen Modellierern, als Audio-Interface - oder sogar als komplettes Gitarren- oder Bass-Rig.

Limited Edition HX Stomp Red!

Line 6 have been at the forefront of the digital modelling world for over 20 years now, pushing the boundaries of guitar technology is nothing new for them and their flagship product, the Helix, has taken the guitar world by storm. With the scaled down Helix, the HX, becoming a go to for players, its latest version, the HX Stomp is sure to generate loads of interest!

The HX Stomp is the ultimate streamlined version of this superstar pedal. Constructed as a 3 pedal unit, the HX Stomp features the same processor as the Helix, meaning you get over 300 effects including legacy lines from the M Series, 8 simultaneous amp, cab and effects blocks, TRS dual expression pedal inputs and a stereo effects loop, it's a serious pedal!

It's super comprehensive but really user intuitive. Built with the working player in mind, it has a solid aluminium construction that can take the rigours of the road, perfect on stage or in the studio, the Helix is the future of multi effects.

LINE 6

Review by musicradar

Review by bonedo

Demo by Guitar Bonedo

Demo by Bernd Kiltz - Gitarrenvideos

HX Stomp Red Limited Edition

PedalSafe Type L6

QuickMount Type L6

Pedal-Montageplatte für LINE6 HX Stomp Pedale

Pedal Mounting Plate for LINE6 HX Stomp pedals

Schutzabdeckung & RockBoard-Montageplatte für LINE6 HX Stomp Pedale

Protective Cover & RockBoard Mounting Plate For LINE6 HX Stomp pedals

Schutzabdeckung & universelle Montageplatte für LINE6 HX Stomp Pedale

Protective Cover & Universal Mounting Plate For LINE6 HX Stomp pedals

Mit dem OC-2 Octave-Pedal kannst du deinen Sound durch Hinzufügen von zwei zusätzlichen Tönen aufpeppen - eine und zwei Oktaven unterhalb der ursprünglichen Note. Jeder Ton hat einen separaten Lautstärkeregler und wird mit hervorragender Klarheit wiedergegeben.

The OC-2 Octave pedal lets users fatten up their sound by adding two additional tones--one and two octaves below the original note. Each tone has a separate volume control and plays back with outstanding clarity.

BOSS

Review by Reddit /guitarpedals

Review by TalkBass

Demo by Middle Aged Gear Junkie

Demo by Nick Granville

OC-2 Octaver

PedalSafe Type E1

QuickMount Type E

Pedal-Montageplatte für Standard-Boss-Pedale

Pedal Mounting Plate For Standard Boss Pedals

Schutzabdeckung & RockBoard-Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & RockBoard Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Schutzabdeckung & universelle Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & Universal Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Featuring the largest tuning display Peterson Tuners has ever incorporated into one of their pedal tuners, the StroboStomp HD boasts a high-definition, LCD screen that incorporates a variable color LED backlight. The user-selectable colors can be used to personalize the tuner or to increase display viewing quality in different levels of ambient lighting depending on the usage environment. The vibrant screen colors can also be assigned to stock or user presets to significantly reduce menu navigation time and increase on-stage tuning confidence at the gig.

Peterson

Review by Gitarre & Bass

Demo by The Time Preservation Society

Demo by EytschPi42

Demo by TalkingBass

Review by The Gear PAge

Review by TDPRI

Review by reddit /guitarpedals

StroboStomp HD

Terence Vignaud

The EBS MultiComp is the most popular EBS effects unit ever. Thousands of bass players, guitarists, and other musicians all over the world use it on their pedalboards. The compressor hits the sweet spot between allowing for dynamic playing and creating a smooth consistency across the fretboard. It can also be used simply to push the gain and beef up the overall sound when desired.

Demo by EBSSweden

MultiComp

Niclas Wego

Basierend auf dem gleichen Konzept und den Möglichkeiten des Flaggschiffs BOSS ES-8, ist der BOSS ES-5 eine minimal abgespeckte Version, die im deutlich kleineren Gehäuse daher kommt und somit ohne Mühe auch auf kleinere Pedalboards passt. Alle wesentlichen Bedürfnisse von Gitarristen und Bassisten werden auch hier bedient. Die kreativen Möglichkeiten für Pedalboard-Systeme, die der ES-8 ermöglicht, sind jetzt auch für kleinere Anwendungen erschwinglich. Erweitere dein Pedalboard mit dem kleinen ES-5 und du spielst in einer völlig neuen Liga. Von jetzt an wirst Du deine Effektpedale völlig anders einsetzen.

Based on the same concept and features as the flagship ES-8, the ES-5 is pared down to offer more practical and essential use options for typical guitarists and bassists, and is drastically reduced in size to fit ready-made, standard-size boards. The innovation in creativity of pedalboard systems made possible by the ES-8 has become more available and affordable. Expand your board just by one size and incorporate the ES-5, then you are in for a whole new world of musical expression, not just another utility tool. From this day on, the use of stompboxes will never be the same.

Review by Paul White, soundonsound.com

Review by Thomas Dill, bonedo.de

Demo by GUITARGUITAR

ES-5 Effects Switching System

Das MXR M287 Sub Octave Bass Fuzz ist ein wahrer Koloss unter den Bass-Effektgeräten und überzeugt mit einem markerschütternden Sound, der die Wände zum erzittern bringt. Hierbei addiert der Octaver, dessen Schaltung auf der Growl-Sektion des beliebten MCR Bass Octave Deluxe basiert, eine Oktave unterhalb des gespielten Tons für einen mächtigen Low End Punch. Darüber hinaus bietet das integrierte Fuzz nicht nur eine 2-Band Klangregelung für Bässe und Höhen, sondern auch zwei Voices. Während das erste Voicing einen warmen, sanft komprimierenden Sound liefert, überzeugt das zweite mit seiner helleren und aggressiveren Klangentfaltung. Damit der natürliche Charakter des verwendeten Basses und die Definition des Tons nicht verloren gehen, kann außerdem das trockene Signal stufenlos hinzugemischt werden, wobei der separate Mittenregler bei Bedarf für einen gesteigerten Punch sorgt.

The MXR M287 Sub Octave Bass Fuzz is a true colossus among bass effect units and impresses with a bloodcurdling sound that makes the walls tremble. The octaver, whose circuit is based on the growl section of the popular MCR Bass Octave Deluxe, adds an octave below the played tone for a powerful low-end punch. In addition, the integrated fuzz not only offers a 2-band tone control for bass and treble, but also two voices. While the first voicing delivers a warm, gently compressive sound, the second is convincing with its brighter and more aggressive sound development. To ensure that the natural character of the bass used and the definition of the tone are not lost, the dry signal can also be mixed in continuously, with the separate mid-range control providing an increased punch if required.

Demo by Low End University

Demo by Stompbox Breakdown 

Demo by Premier Guitar

Review by Premier Guitar

Review by Bonedo

M287 Sub Octave Bass Fuzz

M288 Bass Octave Deluxe

Der SansAmp Bass Driver DI ist viel mehr als nur eine Direktbox. Er kann große Vintage-Röhrensounds, helle moderne Slap-Sounds, knorrige Verzerrungen und alles dazwischen erzeugen. Drei verschiedene Ausgänge zum Ansteuern von Endstufen, Aufnahmepulten, PA-Mischpulten oder einfach zum Verbessern Ihres aktuellen Rigs. Zu den Reglern gehören Presence für die Definition und den oberen Obertongehalt, Blend, um das Verhältnis von Direktsignal und SansAmp-Schaltung zu kombinieren, und ein aktiver EQ, der mit 12 dB Absenkung oder Anhebung speziell auf den Bass abgestimmt ist.

Da die Popularität von 5- und 6-saitigen Bässen den Status einer Modeerscheinung überschritten hat und zum Mainstream geworden ist, haben wir einen Schalter hinzugefügt, mit dem die Bassfrequenz so eingestellt werden kann, dass sie auch in die tieferen Lagen reicht. Außerdem haben wir einen Regler für die Mitten und einen Schalter zur Einstellung ihrer Frequenz hinzugefügt. Der Kern des SansAmp Bass Driver und alle seine Töne bleiben dem ursprünglichen Design treu.

Much more than just a direct box, the SansAmp Bass Driver DI is capable of dialing up big vintage tube tones, bright modern slap sounds, gnarly distortions, and all in between. Three different outputs to drive power amps, recording desks, PA mixers, or simply enhance your current rig. Controls include Presence for definition and upper harmonic content; Blend to combine the proportion of direct signal and SansAmp circuitry; and active EQ specifically tuned for bass with 12dB of cut or boost.

With the popularity of 5- and 6-string basses going beyond fad status and becoming mainstream, we added a switch to adjust the bass frequency to extend into those lower registers. We also added a mid-range control and a switch to adjust its frequency. The core of the SansAmp Bass Driver and all of its tones remain true to its original design.

Tech 21

Review by bondeo

Demo by Philip Brennan

SansAmp BDDI V2

PedalSafe Type D2

QuickMount Type D

Pedal-Montageplatte für große horizontale Pedale

Pedal Mounting Plate For Large Horizontal Pedals

Schutzabdeckung & RockBoard-Montageplatte für große horizontale Pedale

Protective Cover & RockBoard Mounting Plate for Large Horizontal Pedals

Schutzabdeckung & universelle Montageplatte für große horizontale Pedale

Protective Cover & Universal Mounting Plate For Large Horizontal Pedals

The MXR Bass Envelope Filter delivers classic analog envelope filter sounds in an easy-to-use and compact pedal designed specifically for bass. Separate Dry and Effect controls let you dial in the perfect mix of effected and direct signals, so you can bring the funk without losing the low end. Its wide range of filter tones can be shaped with the Decay and Q controls, and a simple twist of the Sensitivity knob can tailor the pedal for your attack—as well as adjust for passive or active basses. The Bass Envelope Filter's power supply circuitry is designed to withstand over-voltage or polarity mishaps, and its true-bypass switching preserves your tone in bypass mode. It's all packaged in a durable, lightweight, Phase 90-size aluminum housing for the ultimate in portability and pedalboard space-saving dimensions.

Review by Talk Bass.com

Demo by The Bass Chanel

Demo by Bass Whisperer TV

M82 Bass Envelope Filter

Für 9-15 FX-Pedale, 1 MOD-Slot - **622 x 330 mm / 24.49" x 12.99"** - erhältlich mit Gig Bag oder Flight Case

For 9 - 15 FX pedals, 1 MOD slot - **622 x 330 mm / 24.49" x 12.99"** - available with Gig Bag or Flight Case

Artem Gorbatov

BASS MAIN

David Litaba

The Microtubes B1K is a phenomenal tribute to one of our most legendary distortion circuits in a compact and intuitive format. We are proud to introduce our Microtubes B1K distortion pedal, the first of its kind from an all-new lineup.

Demo by Bass Bonedo

Review by Kevin Johnson, notreble.com

Review by stephan, gearnews.de

Demo by patrick hunter 

Microtubes B1K

The Ampeg® SCR-DI Bass DI with Scrambler Bass Overdrive is a full-featured Ampeg preamp that delivers a wide range of tones that are perfect for the studio or stage. The classic Ampeg EQ includes Ultra-Hi and Ultra-Lo filters, plus you can dial in the distinctive grind of overdriven tubes thanks to the Scrambler overdrive. With extensive I/O including a Phones output and Aux input, the SCR-DI is the perfect companion for every busy bass player that requires both great tone and flexibility.

Ampeg

Review by Bass Gear Magazine

Demo by Session

SCR DI

Für 4-7 FX-Pedale - **470 x 142 mm / 18.50" x 5.59"** - erhältlich mit Gig Bag oder Flight Case

For 4 - 7 FX pedals - **470 x 142 mm / 18.50" x 5.59"** - available with Gig Bag or Flight Case

Sébastien HANROT

Big Bass  Board Actuel

Fusion, eine relativ neue Musikrichtung, die Jazz und Rock, besonders den technischen "Shredder"-Stil der 80er Jahre, verbindet, hat Tom Quayle als eine seiner führenden Figuren. Trotz seines tiefen theoretischen Wissens fand Tom lange keinen passenden Effektpedal. Nach einer Zusammenarbeit mit Wampler Pedals im Jahr 2012 wurde das Dual Fusion entwickelt, mit zwei modifizierten Schaltkreisen aus dem Euphoria und Paisley Drive. Es bietet Klarheit, Kontrolle und einen Verstärker-ähnlichen Sound und spricht Gitarristen verschiedener Genres an.

Fusion, a relatively new genre blending jazz and rock, particularly the technical "shredder" style from the 80s, has Tom Quayle as one of its leading figures. Known for his deep theoretical knowledge and unique playing style, Tom struggled to find a pedal that matched his needs. After collaborating with Wampler Pedals in 2012, they developed the Dual Fusion pedal. It features two modified circuits from the Euphoria and Paisley Drive, designed to give Tom clarity, control, and amp-like response when stacked. The Dual Fusion has become a versatile tool for modern fusion guitarists and appeals to players of all genres.

Wampler

Review by guitarplanet.eu

Review by musicradar.com

Review by guitarfella.com

Review by guitarinteractivemagazine.com

Quick Start Guide

Demo by Har Maes

Demo by  Brett Kingman

Demo by  David Wallimann

Dual Fusion

LS-2 Line Selector

Filippo Rimondi

Der MXR Tap Tempo-Schalter verfügt über eine einstellbare Tip/Ring-Konfiguration, sodass Sie die Verzögerungszeit einer Vielzahl von Delay-Pedaltypen steuern können. Dieser kleine Fußschalter ist robust gebaut und für ein langes Leben auf Tour geeignet.

The MXR Tap Tempo switch features adjustable tip/ring configuration so you can control the delay time of a wide variety of delay pedal types. This pint-sized footswitch is ruggedly built for a lifetime on the road.

MXR M199 TapTempo Switch

Lee Atkin

Entwickelt in Zusammenarbeit mit Bass-Professor und Klangkenner Ian Martin Allison ist der MXR Bass Synth ein Kraftpaket unter den Pedalen, das donnernde Sub-Oktaven, expressive Hüllkurven und üppige Modulationseffekte mit erstklassigem Tracking und Sustain bietet – dazu alle Funktionen, die Sie benötigen, um jeden einzelnen Aspekt Ihres Klangs zu formen.

Designed with low-end professor and tone connoisseur Ian Martin Allison, the MXR Bass Synth is a powerhouse of a pedal offers thunderous sub-octave, expressive envelope, and lush modulation effects with killer tracking and sustain—plus all the features you need to shape every detail of your tone.

Demo by Nate Navarro

Review by No Treble

Review by Gear News

Bass Synth MB301

David Graves

Born in the heart of NYC and raised on the road, the Tone Hammer Preamp DI has been an indispensable tool for bassists seeking inspiring tone and versatility. With its warm, rich, and dynamic sound, the Tone Hammer Preamp is an essential preamp/direct box for every bassist. The Tone Hammer features fully sweepable midrange frequencies, in addition to bass and treble controls. With the Tone Hammer’s pristine D.I., players are set for either studio or stage. Enhanced for even greater flexibility, the updated Drive circuit now provides an expanded range, allowing for increased gain and a dedicated control to finely tune your sound. You can go from modern slap sounds to vintage or overdriven, and everything in between. 18-volt operation gives the Tone Hammer plenty of headroom, and we’ve added a Headphone Out and Aux In, making it the perfect practice companion, whether on the road or at home.

Aguilar

Review by reddit /basspedals

Review by algam Benelux

Tone Hammer Preamp v2

Their popular B3K V2 keeps the same grind as the original design and adds the ability to restore the mid frequencies. Now you can send your bass rig into meltdown without losing any clarity. If you're looking to add grind to your tone while maintaining your tonal core, you can't go wrong with the Darkglass B3K V2.

Review by no treble 

Demo by patric hunter 

Demo by the bass channel 

Microtubes B3K v2

Bîrleanu Bogdan

All the aggressive bass overdrive tones you want, without the low end loss!
Capable of producing everything from warm, tube-like overdrive to full-on distortion, this pedal will give you the grind you need without sucking out your low end. The SATURATION control offers a tremendous range of distortion while the CONTOUR control allows you to dial in a scooped or a more aggressive, boosted midrange sound. The PRESENCE knob adds 'attack' to your sound, ensuring that your bass remains defined even with the most saturated settings. The output LEVEL control guarantees that you'll be able to get the distortion you want at any volume level. *Pedal powered by universal 9-volt power supply only. Not included.

'Saturation' controls how distorted your tone is, with a range from subtle tube-like to aggressive
'Contour' controls your midrange, from scooped to bumped
Pedal powered by universal 9-volt power supply only. Not included.

Demo by Gregor Fris

Review by Guitar World

Review by bassic.de

Agro v2

The Microtubes Vintage is our tribute to some of the most legendary sounds in rock history. It provides warm tube-like tones with a natural dynamic response that echoes the organic compression of old tube amps and reel-to-reel tape machines.

Demo by  Prymaxe

Demo by  Musicmaker

Review by Steve Cook, premierguitar.com

Demo by amosheller 

Vintage Microtubes

The Cali76 Bass Compressor is a studio-grade compressor pedal inspired by the world-famous Urei® 1176® studio compressor, heard on many of the greatest studio recordings since the 1960s. The Cali76 Bass Compressor uses uncompromising all-analogue circuitry to make these distinctive, ultra-fast FET compression tones available to the modern guitarist.

The latest in a long lineage of Cali76 compressors, the Cali76 Bass Compressor features a full set of studio-style controls, a DRY knob for parallel compression and an improved sidechain that matches the response of our sought-after “large format” Cali76 – the pedal that put Origin Effects on the map back in 2012.

With a 10-LED gain reduction meter, a pedalboard friendly enclosure and massive headroom thanks to internally increased voltage, the Cali76 Bass Compressor marks the culmination of over a decade of experience making the world’s finest compressor pedals.

Origin Effects

Demo by  BassTheWorld.com

Review by Compressor Pedal Reviews

Review by Gearnews

Review by AMAZONA

Manual download

Cali76 Bass Compressor (64 Black Panel)

Sam McAinch

The BASSRIG Super Vintage is, quite simply, a complete vintage bass amp in a pedal. Based on the iconic Ampeg® SVT®, we have used all-analogue circuitry to recreate a complete valve amp-style signal path, along with an all-analogue cabinet simulator, giving you all the warmth, feel and drive of this classic bass rig in one small box.
When the SVT® arrived on the scene in 1969, it rewrote the rulebook for purpose-built bass amplification. Thanks to its enormous power, deep bass, growling overdrive and purposeful control set, this tower of tone has remained the amp of choice for the most discerning bassists on the world’s biggest stages.
With XLR and ¼” outputs, the BASSRIG Super Vintage will fit seamlessly into any signal chain, no matter how simple or complex, and our powerful Amp Out EQ tailors your sound to work with any amp, meaning you never have to compromise on tone.

Demo by Origin Effects with Ian Allison

BassRig Super Vintage

Jürgen Eschmann

Midi-Controller / Page turner

Foot switch control in a stompbox design that easily integrates with your pedal board!

Cue audio, lighting, and effects
Start and stop backing tracks and metronomes
Send MIDI commands and custom DAW keys
Turn pages, read music, scroll lyrics and tabs
Capture video, photos, and more!

Airturn

BT500S-2

QuickMount Type UH

Universal-Pedal-Montageplatte für horizontale Pedale

Universal Pedal Mounting Plate For Horizontal Pedals

Roland Schmidt

Die RockBoard QuickMount Pick Box ist ein hilfreiches Zubehör für Musiker, die alles an einem Ort aufbewahren möchten. Nie wieder verlorene Plektren oder verschwundenes Zubehör! Dank des QuickMount-Systems benötigst du kein klebriges Velcro mehr, die Pick Box lässt sich fest und sicher in das RockBoard Slot Grid klemmen.

The RockBoard QuickMount PickBox is a useful accessory for musicians who want to keep everything in one place. No more lost picks or missing accessories! Thanks to the QuickMount system, you no longer need sticky hook & loop tape. The PickBox snaps securely into the RockBoard slot grid.

RockBoard

RockBoard PickBox

PickBox

Tristan NDinga

Ampero multi-effects processor proved itself to be a game changer for its huge tone, great versatility and tiny size. Since first launched, it quickly become popular among both starters and pro musicians. For the best possible portability, the footswitch amount on Ampero is limited – however for the players who want more flexibility on this unit, that's not enough…So here it comes the Ampero Switch, Ampero's best pal!

The Ampero Switch is an ultra compact momentary footswitch controller designed not only for Ampero, but also for other devices with momentary footswitch controller support. Featuring the same Aluminum casing and appearance theme design, Ampero Switch definitely matches your Ampero's vibe perfectly. Carefully selected footswitches and other components ensure comfortable switching and excellent endurance.

It's quite simple: connect the TRS jack to Ampero's EXP 2/FS jack with the attached TRS cable, then enter Global menu, find EXP 2/FS sub menu, set MODE to Dual FS. After this, you can assign any function you need to the footswitches.

FS-1 Ampero Switch

MultiComp by EBS