andronik supersonik

Die RockBoard® MOD 5 Cab SIM + DI Patchbay bietet wählbare, IR-basierte Stereo-Lautsprecher Simulation, eine aktive DI-Box, sowie eine einfache Lösung, um alle Verbindungen zu und von deinem Effekt Setup zu organisieren. Egal, ob du ein RockBoard® oder ein anderes Pedalboard einer anderen Marke verwendest - die MOD 5 eröffnet völlig neue Möglichkeiten. Mit der Speaker-Cab-Simulation und DI kannst du direkt loslegen und hast DEINEN Sound parat, unabhängig davon, welche Backline an der jeweiligen Venue zur Verfügung steht. Du möchtest deine persönliche Lieblings-Cabinet benutzen? Kein Problem, lade eine Impulse Response des Sounds in die MOD 5 und du hast sie überall dabei. Der Patchbay-Teil dient dazu, Verbindungen von unterhalb deines Pedalboards nach vorne zu leiten, um dir einen zentralen Zugangspunkt zu deinem Setup zu geben und deinen Kabelsalat aufzuräumen. Für geräuschloses Üben auf der Straße bietet der MOD 5 auch einen Kopfhörerverstärker mit einstellbarer Ausgangslautstärke.
- Cabinet Simulation & DI Patchbay
- IR basierte Lautsprecher Simulation
- 6 integrierte IRs wählbar
- Unterstützung von zusätzlichen Custom IRs (max. 1024 pts.)
- integrierte aktive DI Box
- Kopfhöhrer Verstärker
- passend für MOD Slots in RockBoard® Pedalboards
- kompatibel mit einer weiten Reihe anderer Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- wählbarer MONO / STEREO Input
- wählbarer UN- / BALANCED Output
- Ground Lift Schalter
- Regler für Phones Volume
- 3 x 6,3 mm TRS Thru
- XLR DI Out
- 6.3 mm Parallel TRS Output
- 3.5 mm Stereo Kopfhöhrer Ausgang mit einstellbarer Lautstärke
- micro USB Anschluss für Firmware Updates und zum Hochladen von Custom IRs
- Stromversorgung via optionalem 9V DC Netzteil, 2.1 x 5.5 mm Hohlstecker, Polarität (-) innen
- Stromaufnahme 300 mA
- Batteriebetrieb nicht unterstützt
- Abmessungen mit Frontplatte (B x T x H) 175 x 85 x 47 mm 
- Abmessungen ohne Frontplatte (B x T x H) 160 x 85 x 33 mm
- Gewicht 470 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The RockBoard® MOD 5 Cab SIM + DI Patchbay offers customizable, IR-based stereo speaker cabinet simulation, an active DI box, as well as a simple solution to organize all the connections to and from your effects setup. Whether you are using a RockBoard® or any other brand pedalboard - the MOD 5 will open completely new possibilities. The speaker cab simulation & DI let's you go direct, providing YOUR sound, whatever backline is being provided at the venue you're playing. Do you want to use your favorite cab? No problem, load an impulse response of its sound into the MOD 5 and you have it with you, wherever you go. The patchbay part is designed to route connections from underneath your pedalboard to its front, in order to give you a central access point to your setup and tidy up your connections. For silent and on the road practicing, the MOD 5 also provides a headphone amplifier with adjustable output volume.
- cabinet simulation & DI patchbay
- IR-based speaker cabinet simulation
- 6 integrated IRs selectable
- support of additional Custom IRs (max. 1024 pts.)
- integrated active DI box
- headphone amplifier
- fits MOD slots in RockBoard® pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- selectable MONO / STEREO input
- selectable UN / BALANCED output
- ground lift switch
- control for Phones Volume
- 3 x 6.3 mm / ¼" TRS thru
- XLR DI Out
- 6.3 mm / ¼" Parallel TRS output
- 3.5 mm / 1/8" stereo headphone output with adjustable volume
- micro USB connection for firmware updates and loading custom IRs
- power supply via optional 9V DC power adapter, 2.1 x 5.5 mm barrel plug, polarity (-) center
- current draw 300 mA
- battery operation not supported
- dimensions with front plate (W x D x H) 175 x 85 x 47 mm / 6 57/64" x 3 11/32" x 1 27/32" 
- dimensions without front plate (W x D x H) 160 x 85 x 33 mm / 6 19/64" x 3 11/32" x 1 19/64"
- weight 470 g / 1.04 lbs.
- incl. mounting screws, counter nuts, and TX wrench

Cab SIM + DI Patchbay

Vu Board fat

Tester

The Empress Tremolo2 is an original design built from the ground up to include innovative features without sacrificing tone. The audio signal path is analog, but the tremolo effect is controlled digitally via opto technology.

Tap tempo, selectable waveforms, a choice of 8 rhythms and a full preset system capable of storing up to 8 presets are all at your fingertips. The control port allows control over the Tremolo2 via external tap tempo, expression pedal, control voltage and MIDI, making the tremolo2 more powerful than ever!

Empress Effects

Demo by Knobs

Official Product Video

Product Page

Review by reddit /guitarpedals

Review by musicradar

Manual download

Tremolo2

Als der Echoplex® EP-3 auf den Markt kam, waren die Gitarristen begeistert von der Art und Weise, wie sein Vorverstärker ihren Sound aufpeppte. Schon bald fand der EP-3 seinen Weg auf die Platten der besten Gitarristen - von Jimmy Page bis Eddie Van Halen und Eric Johnson -, und zwar sowohl wegen seiner Tonbearbeitungsfähigkeiten als auch wegen seines Bandecho-Effekts. Jetzt kannst du die legendäre geheime Soße des EP-3 direkt auf dein Pedalboard bringen.

Dunlops EP101 Echoplex Preamp stellt die Magie des EP-3 Frontends nach, mit einem Feldeffekttransistor (FET) genau wie das Original und mit dem exakt gleichen Signalweg. Mit dem Gain-Regler können Sie Ihr Signal um bis zu +11 dB anheben, mit leichtem asymmetrischen Clipping bei höheren Einstellungen für ein wenig organischen Grind.

When the Echoplex® EP-3 came out, guitar players were hooked by the way its preamp sweetened up their sound. Soon, the EP-3 made its way onto the records of top guitar players—from Jimmy Page to Eddie Van Halen and Eric Johnson—as much for its tone conditioning ability as its tape echo effect. Now, you can put the EP-3's legendary secret sauce right on your pedalboard.

Dunlop's EP101 Echoplex Preamp recreates the magic of the EP-3's front end, featuring a Field-effect Transistor (FET) just like the original and following the exact same signal path. The Gain control allows you to boost your signal by up to +11dB, with light asymmetrical clipping at higher settings for a bit of nice organic grit.

Dunlop

Review by mylespaul

Review by TDPRI

Demo by StompboxTV

EP101 Echoplex Preamp

PedalSafe Type A1.1

QuickMount Type A

Pedal-Montageplatte für Standard-Einzelpedale

Pedal Mounting Plate For Standard Single Pedals

Schutzabdeckung & RockBoard-Montageplatte für MXR® Standardgröße und Dunlop® Echoplex Delay Pedale

Protective Cover & RockBoard Mounting Plate For MXR® standard size and Dunlop® Echoplex Delay pedals

Schutzabdeckung & universelle Montageplatte für MXR® Standardgröße und Dunlop® Echoplex Delay Pedale

Protective Cover & Universal Mounting Plate For MXR® standard size and Dunlop® Echoplex Delay pedals

Nicolas Wilfer

Die JHS Colour Box V2 ist ein Preamp / DI-Box nach dem Vorbild legendärer Neve Studio-Konsolen. Das Pedal wurde entwickelt um den authentischen Sound eines Instruments (oder Mikrofons) am Direct-In der Mischpulte zu reproduzieren, dabei bietet die Colour Box V2 alle Features der beliebten V1-Version und kommt zusätzlich mit einer Vielzahl an Verbesserungen und neuen Features, die das Pedal zu einem perfekten Allrounder und Always-On Pedal für alle denkbaren Instrumente und sogar für Sänger machen. Zu den neuen Features zählen eine erweiterte EQ-Sektion, ein Hi/Lo Schalter für massiven, cleanen Headroom und die Möglichkeit 48V Phantom-Power an Kondensator-Mikrofone weiterzugeben. Die Gain-Sektion (Rot) bietet Regelmöglichkeiten Master, Pre-Vol und Step. Master kontrolliert das Gesamt-Volume des Pedals, Pre-Vol arbeitet als Gain-Regler zwischen den beiden internen Gain Stages und bietet bei Bedarf eine Verzerrung, die von leichten Break-Up-Sounds bis zu Fuzz reicht. Der Step-Regler verändert das Gain der Preamp Stages in fünf Schritten. Der Hi/Lo Schalter verändert den cleanen Headroom des Pedals, der -20 dB Pad Schalter passt den Input bei Bedarf an Mikrofone mit einem hohen Ausgangspegel an. Die EQ-Sektion (Blau) wurden neben den bekannten Regler für Treble, Middle und Bass (+/- 17 dB Cut / Boost in jedem Band) um drei Shift-Regler erweitert, die den Frequenzbereich der einzelnen Regler anpassen. Die Hi-Pass-Sektion wird über den Kippschalter aktiviert. Um das Pedal so flexibel wie möglich zu halten steht ein kombinierter XLR/TRS Input zur Verfügung.

The JHS Colour Box V2 has all the same functionality of the popular V1 version with many new and improved additions like expanded EQ controls, a Hi/Lo switch for massive clean headroom, and the ability to pass phantom power to your condenser mics. The Gain section in red has three controls: Master, Pre-Vol, and Step. The Master volume controls the overall volume of the unit. The Pre-Vol controls the amount of gain between the two internal gain stages. This acts as a "drive" or "gain" control, adding more grit, distortion, and even fuzz as you increase the gain. The Step control increases the gain of each preamp stage in five stages. Rotating the Step knob from left-to-right will increase the gain by the following: 1st is +18 dB, 2nd is +23 dB, 3rd is +28 dB, 4th is +33 dB, 5th is +39 dB. The JHS Colour Box V2 has a new Hi/Lo switch to control the amount of clean headroom you have available. In the Lo mode, you will easily be able to get ultra clean sounds without breakup. Lo Mode is excellent for tone shaping when distortion is not needed. In the Hi mode, the Colour Box V2 will distort much more readily, giving you a broad spectrum of overdrive, distortion, and fuzz sounds. In addition to the Hi / Lo gain switch, there is a -20 dB pad switch on the right side of the Colour Box V2. This function only works when in XLR input mode and can help tame the volume for high output microphones. The EQ section in blue has three new Shift controls correlating to its standard Treble, Middle and Bass controls. The Shift knobs adjust the range of frequencies that the Treble, Middle, and Bass knobs control. The center frequencies for the Shift knobs are Treble 10kHz, Middle 1kHz, and Bass 120Hz, while the Treble, Middle, and Bass knobs boost or cut with +/- 17 dB of control. If you want to boost high-mid frequencies, turn the Mid Shift knob to 3 o'clock or above and increase the Middle knob above 12 o'clock. If you want to cut upper treble frequencies, turn the Treble Shift knob to 3 o'clock or above and set the Treble knob below 12 o'clock. The Shift knobs give you precision control over the EQ for anything you put through the Colour Box V2. The Hi-Pass section is enabled by the toggle switch below the Hi-Pass knob. Just flip it up to engage the Hi-Pass knob, which spans from 60Hz to 800Hz with a 6dB per octave slope. The Colour Box V2 has a combination XLR and 1/4" input jack to use either an instrument or microphone. Select your input with the input selector switch on the right side of the pedal labeled INST/XLR.

Official Product Page

Manual

JHS Colour Box: A 1073 You Can Take Anywhere - JHS Pedals

Colour Box V2 10 Year Anniversary

The PLASMA Pedal creates heavy distortion by amplifying an audio signal up to 3500 Volts and transforming it into electrical discharges. You are literally playing a bolt of electricity.

Gamechanger Audio

Website

Plasma Pedal

Steven Yon

Ok, so you have eight effects pedals which you use regularly. You use various combinations of these pedals in various songs, but you are not good at tap dancing…or you are just clumsy and have (once or twice) stepped on the ultra tricked out-metalized-distortion pedal for the lead in your one ABBA cover. You have seen the digital effects controllers they use on the big stages, and have secretly yearned for one… even though you may never make the big stage. Enter Thomas Guldmann’s Octa-switch MK3. Your eight effects plug into the eight effects-loops on the back of this unit (all true-bypass, impedance free, gold relays so you can run any of your pedals, new and old without problem), and then by turning on or off the numbered switches in each of eight DIP Bank switches, you determine which effects you wish to use simultaneously in each Bank. There is a blue LED for every effects loop used and for each Bank (so once you are programmed, when you step on Bank 6 you will see the lights of all the effects you have assigned to Bank 6 and the Bank 6 LED). The Octa-switch MK3 has incorporated a couple new features as well! The ninth switch on the left side of the case is a BYPASS Switch….this allows you to completely bypass all eight pedals and enjoy only the unaffected sound of your amplifier. There are also two External Switching jacks which allow you to use two amplifiers and/or switch channels on those amps. Once you have all the Banks programmed, we recommend placing a piece of scotch or electrical tape over each DIP (….just to protect the switch from accidental switching, damage or floods….like beer). There is a buffered (or not….switchable) Mono input and a stereo Output, and the unit is powered by dual 9v batteries, or by a regulated power supply…like the PowerJack or the Pro Power (both by Carl Martin).

Carl Martin

Review by bonedo

Demo by ukguitarnoddle

Demo by EytschPi42

Octa-Switch MK3

BOSS

TU-3S Tuner

The Replicator D’Luxe is a sum up from all the knowledge, we have built up over the years, making
Tape delays.
it is a 2 head machine. The drive mechanism has been updated with a noiseless belt drive. A tape lock/release mechanism is added, to make the pinch wheel and tape last longer and electronics has been tuned to perfection.

T-Rex

Demo by Martin Klaja's Guitarchannel

Demo by Duskmos

Demo by T-Rex Effects

Review by The Gear Page

Review by GEOFF KING, mixdownmag.com.au

Replicator D'LUXE

Cited as a major influence by wah masters such as Hendrix, Clapton, and Vaughn, Buddy Guy helped establish the effect as part of the blues vocabulary. To honor his contributions we have created the Buddy Guy Cry Baby Wah, featuring the Fasel Inductor for a sweet and singing top end, and two distinct user selectable wah voices—choose "DEEP" for a big and throaty growl, or "BG" for Buddy's own warm and bell-like wah tone. Convenient side-mounted LEDs indicate which mode you are in, while a separate LED indicates effect on/off. Let your guitar sing the blues in style with the Buddy-approved polka dot graphics and custom signature tread.

Review by Simon Bradley, musicradar.com

Demo by Guitar World

BG95 Buddy Guy Cry Baby Wah

QuickMount Type M

Pedal-Montageplatte für Dunlop Cry Baby Wah-Pedale

Pedal Mounting Plates For Dunlop Cry Baby Wah Pedals

Was ist also dieses verrückte Pedal? Nun, auf den ersten Blick sieht es aus wie viele andere Carl Martin-Pedale... es gibt einen High Gain-Kanal, der jede Menge Bässe und schöne knackige Höhen hat, einen sehr dynamischen Crunch-Kanal, der die Mitten mit sehr wenig Kompression betont, und natürlich den berühmten 12db Boost-Kanal, den wir alle so gut kennen.

So what is this crazy pedal? Well, at first glance it looks like many other Carl Martin pedals…there is a High Gain channel which has loads of bottom end and nice crisp highs, a very dynamic Crunch channel which emphasises the mids with very little compression, and of course that famous 12db Boost channel that we are all so familiar with.

Demo by Musiker TV

Demo by  Victor Hugo Targino

Demo by  The Tone Lounge

Demo by  Six String Alliance (Six String Alliance)

Review by PremierGuitar

Review by Musicradar

Review by Harmony Central

Review by Bonedo

Greg Hoew's Lick Box

James Squire

Der Echo Fix EF-P5 FET Compressor ist ein erstklassiger, vollständig analoger Dynamikprozessor, der sowohl für den Studio- als auch für den Pedalboard-Einsatz konzipiert ist. Inspiriert von klassischen FET-Kompressoren wie dem 1176, verfügt er über hochwertige Eingangs- und Ausgangstransformatoren für einen reichen, warmen Klang. Das Pedal bietet eine breite Palette von Funktionen, darunter schaltbare Kompressionsverhältnisse (4:1, 8:1, 12:1 und 20:1, einschließlich des "All Buttons In"-Modus), einen Mix-Regler für Parallelkompression, einen Hochpassfilter für frequenzselektive Kompression und einen rückseitigen Schalter für einen +20-dB-Gain-Boost. Es verfügt außerdem über unsymmetrische 1/4"-TS-Buchsen und symmetrische XLR-I/O, wodurch es für eine Vielzahl von professionellen Anwendungen geeignet ist.

 The Echo Fix EF-P5 FET Compressor is a premium, all-analog dynamics processor built for both studio and pedalboard use. Inspired by classic FET compressors like the 1176, it features high-quality input and output transformers for a rich, warm tone. The pedal offers a wide range of features including switchable compression ratios (4:1, 8:1, 12:1, and 20:1, including "all buttons in" mode), a mix control for parallel compression, a high-pass filter for frequency-selective compression, and a rear-panel switch for a +20dB gain boost. It also includes both unbalanced 1/4" TS jacks and balanced XLR I/O, making it suitable for a variety of professional applications.

Echo Fix

Demo by Emily Hopkins (Harp Lady)

Demo by Andy Demos

EF-P5 FET Compressor Pedal

Alexander Göbel

The Echo Fix EF-P3 Chorus Vibrato pedal is an analog BBD Chorus pedal with a rich and extended feature set.

Designed to be the ultimate chorus pedal, each control has been extended in range for sonic flexibility. From subtle pitch glides to fast Leslie-style wobbles, the wide range of controls makes this pedal extremely versatile and creative.

Demo by Ponderer Sounds

Demo by  R.J. Ronquillo

Review by Pedal of the Day

Review by delicious audio

Review by SINESQUARES

EF-P3 Chorus/Vibrato

Tom Gumley

The Echo Fix EF-P2 is a real Spring Reverb pedal that packs a huge sound into a small enclosure. The EF-P2 features a three-spring reverb tank, adjustable Spring Drive, Bass / Treble EQ controls, and Reverb Volume control. With a footswitch for reverb bypass and also a direct signal mute footswitch, the EF-P2 can also be used as an outboard effect in recording studios. The EF-P2 can accept audio signal from synths and other audio devices, not just guitar.

Demo by Demos in the Dark

Demo by R.J. Ronquillo

Review by AMAZONA

EF-P2 Spring Reverb

Für 10-20 FX-Pedale, 1 MOD-Slot - **622 x 424 mm / 24.49" x 16.69"** - erhältlich mit Gig Bag oder Flight Case

For 10 - 20 FX pedals, 1 MOD slot - **622 x 424 mm / 24.49" x 16.69"** - available with Gig Bag or Flight Case

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 1 V2 ist eine Pass-Through-Box, die speziell für Gitarristen und Bassisten entwickelt wurde. Du kannst das MOD 1 V2 nutzen um mehrere Pedale deines Setups im Front End und im Effekt-Loop des Verstärkers zu postieren (4-Kabel Methode) oder die vier TRS-Anschlüsse als zentralen Zugang und Ausgang des Boards nutzen. Die XLR-Through-Verbindung kann als Signalausgang vom Pedalboard zum Mischpult oder zur PA verwendet werden.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 5 x 6,3 mm TRS thru
- 1 x XLR thru (männlich vorne / weiblich hinten)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 5 x 6,3 mm / ¼" TRS thru
- 1 x XLR thru (male front / female back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR, IEC & Barrel Patchbay

amplified nation wonderland overdrive v2 combo board S

Miguel Angel Antonio Martínez Fuentes

Das DC7 ist ein professionelles Schaltnetzteil mit einem bemerkenswert flachen Profil von nur einem Zoll, das speziell für die Montage unter Pedalboards mit geringer Bodenfreiheit entwickelt wurde. Es bietet sieben isolierte DC-Ausgänge, von denen jeder bis zu 660 mA bei 9 V liefert, wobei pro Ausgang vier wählbare Spannungen zur Verfügung stehen. Das Gerät verfügt über einen 5V-USB-Ausgang für Mobilgeräte und einen 24V-Zusatzanschluss zur Systemerweiterung mit Einheiten wie dem CIOKS 4 oder 8. Eine fortschrittliche mehrstufige Filterung gewährleistet einen extrem rauscharmen Betrieb, ideal für stromhungrige digitale und empfindliche analoge Effekte. Das Netzteil nutzt einen universellen Netzeingang, was den weltweiten Einsatz ohne externe Transformatoren ermöglicht.

The DC7 is a professional-grade switch-mode power supply featuring a remarkably slim one-inch profile designed for low-clearance pedalboard mounting. It provides seven isolated DC outlets, each capable of delivering up to 660mA at 9V, with four selectable voltages available per outlet. The unit includes a 5V USB output for mobile devices and a 24V auxiliary port for expanding the system with additional units like the CIOKS 4 or 8. Advanced multi-stage filtering ensures ultra-low noise operation, making it suitable for high-current digital and sensitive analog effects. The power supply utilizes a universal mains input, allowing for worldwide use without the need for external transformers.

CIOKS

Review by Sound on Sound

Review by Guitar Chalk

DC 7

Jimmy  Cooper

CIOKS 4 Expander is the perfect companion to CIOKS DC7 in case you would like four additional outlets with four selectable voltages on each tap (9, 12, 15 and 18V DC) which can each deliver 660mA at 9V DC. Simply connect CIOKS 4 Expander to your CIOKS DC7 via the courtesy 24V outlet and you are good to go.

But that is definitely not all – what makes CIOKS 4 Expander truly unique is the fact that you can power it with anything from 9V to 24V DC or 9V to 12V AC via the non-polarized DC socket input. Furthermore CIOKS 4 can even be powered by connecting it to a USB powerbank via its 5V USB C input or by using a tablet or laptop power supply with a USB C plug. This flexibility means that you can use CIOKS 4 Expander as a stand-alone unit and power it with almost any adapter including the 1-SPOT or GigRig Generator. You can also use the 24V output on a Strymon Zuma unit to power the CIOKS 4 Expander. It can also convert an unused AC outlet on your existing power supply into 4 isolated DC outlets. 

Review by KVR Audio

Review by Talk Bass.com

Now in an MXR mini housing, the Classic 108 Fuzz gives you all the same vintage fuzz tones in a much smaller footprint. Like its larger predecessor, it's loaded with the silicon BC-108 transistor for a round and dirty crunch. This Classic 108 Fuzz also has the same no-nonsense control interface—just crank the Volume and Fuzz controls to your liking and start riffing. Use the Buffer switch on the side to make the fuzz play nice with wah pedals.

Demo by Eric Merrow

Demo byGuitarristas

Review by Six String Sensei

Review by Guitar.com

M296 Classic 108 Fuzz Mini

QuickMount Type L

Pedal-Montageplatte für Standard-Mini-Pedale

Pedal Mounting Plate For Standard Mini Pedals

It's a much, much smaller than the ST-1 at only 3.9" wide x 4" deep, and more intelligent version of the epic Supa-Trem1. Sporting True-Bypass,Tap-Tempo, external Tap jack, Half/Double hold feature, up to 15dB boost, true Square, Sine, and the natural heartbeat-like Warble wave-forms! It also can do speeds so slow that a full cycle takes around 10 seconds, and fast speeds beyond 220bpm. The heart of the ST-1 is still there, the warm Analog Devices JFET preamp. And this pedal is so small it will fit in your pocket, and with its top-mounted jacks, will fit in any little spot on your board. Don't forget, just like the ST-1, the Jr also works as an incredible clean boost with the Mix control turned down!

Fulltone

Demo by PJ and the Beard

Review by Gearnews

Supa-Trem Jr

DC-2W Dimension C (Waza Craft)

PedalSafe Type E1

QuickMount Type E

Pedal-Montageplatte für Standard-Boss-Pedale

Pedal Mounting Plate For Standard Boss Pedals

Schutzabdeckung & RockBoard-Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & RockBoard Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Schutzabdeckung & universelle Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & Universal Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Cameron Taylor

The CopperSound Passive ABY pedal is a simple and handy utility device designed to split one input into two separate outputs, or combine two separate inputs into one output. Being a Bi-directional Passive device, its applications are only limited by your imagination! Use it to run and organize your stereo rig, switch between two instruments on the fly, or even as a mute switch for silent instrument changes. To make connections simple, the footswitch washers are color-coordinated to their corresponding output jack. Since this ABY is a passive device, power is only required for the status LEDs.

Coppersound

Passive ABY Switcher

Diese legendären britischen Verstärker, der Super Lead und der Super Bass, sind berühmt für ihre holzigen, organischen und wunderschönen Sättigungsklänge und liefern seit fast 50 Jahren einen der zeitlosen Klassiker unter den Sounds. Musiker wie Jimmy Page, Paul Kossoff und unzählige andere vertrauten auf diesen Klangcharakter, um ihren unverwechselbaren Sound zu kreieren. Xotic hat dieses Vintage-Meisterwerk in einem robusten, kompakten Gehäuse neu aufgelegt. Der SL Drive bietet ein sehr verstärkerähnliches Ansprechverhalten und lässt sich durch Drehen des Lautstärkereglers an der Gitarre schön aufklären. Mit den internen DIP-Schaltern können Sie die Klangcharakteristiken beider Modelle aus dem Jahr 1959 auswählen. Die Einstellung „Super Lead“ bietet einen helleren Klang mit mehr Gain, während die Einstellung „Super Bass“ mehr Tiefen und weniger Höhen bietet. Dieses kompakte Design ist ein leistungsstarkes Werkzeug für professionelle Musiker.

Famous for its woody, organic and beautiful sounds of saturation, these legendary British amplifiers, the Super Lead &amp; Super Bass, have been delivering one of the all-time classic sounds for almost 50 years. Players like Jimmy Page, Paul Kossoff and countless other relied on this type of tone for their signature sound. Xotic has recreated this vintage masterpiece in a rugged small enclosure. The SL Drive offers very amp-like response and cleans up nicely with a roll of your guitar’s volume knob. The internal dip switches allow you to choose the sound characteristics of both 1959 models. The “Super Lead” setting offers a brighter tone with more gain, while the “Super Bass” setting has more low end with less highs. This compact design is a powerful tool for the working musicians.

Xotic

Demo by Guitarist

Review by Tony McKenzie

Review by Premier Guitar

SL Drive

Die wohl beste Geheimwaffe, von der du wahrscheinlich noch nicht wusstest, dass du sie brauchst! Gerade wir Pedal-Nerds laufen Gefahr unseren Sound mit endlosen Pedalketten in den Ruin zu treiben. Der Feind heißt Kapazität, ein Problem das bei zu langen Kabelwegen undn ich zuletzt schlechten Schaltungen auftritt und das Signal High End kostet und es schwach und charakterlos klingen lässt. Ein Trugschluss, der dies noch unterstützt is die Annahme dass True Bypass immer gut ist, denn ganz stimmt dies leider nicht. Der Little Black Buffer kommt genau hier ins Spiel und versorgt dein Rig mit genau der richtigen Eingangsimpedanz, damit du am Ende einen klaren, natürlichen Sound hast, der klingt als hättest du dich direkt in den Amp gestöpselt.

This may be the greatest weapon you didn’t know you needed. For those of us who are a little “pedal happy” there can be some downfall to our tone. When running a pedal board with more than one or two effects, something called “capacitance” happens. This natural problem happens due to the amount of cable or line that your signal has to travel through, not to mention bad switching systems in certain pedals. The result is a very audible amount of high-end loss, weak signal, flabby bass and uncharacteristic pickup behavior in guitars. Another problem is the assumption that all “true bypass” is good. This isn’t true and actually can be worse than imagined. This is where the “Little Black Buffer” steps in providing the perfect input impedance to your rig and giving you the final result of clear, natural tone that sounds like you're plugged straight into your amp.

Little Black Buffer

QuickMount Type UV

Universal-Pedal-Montageplatte für vertikale Pedale

Universal Pedal Mounting Plate For Vertical Pedals

With the TU-3W, BOSS brings Waza Craft mojo to the world’s leading stompbox tuner. At its core, the TU-3W provides rock-solid tuning equivalent to the industry-standard TU-3. In true Waza tradition, the pedal’s benchmark functionality is further enhanced with BOSS skill and craftsmanship. Pure, uncolored signal transfer is essential for a tuner, and the TU-3W features redesigned circuitry with selectable buffered or true-bypass operation and the most transparent audio pass-through possible. Packing high-end performance for discriminating players, the TU-3W delivers a premium pedal experience only available from BOSS.

TU-3W Tuner

Der SP Compressor hat eine hervorragende Klangqualität und bietet eine große Auswahl an Kompressor-Sounds von Vintage über subtil bis hin zu modern.
 
Er ist sehr flexibel und verfügt über einen Dry-Blend-Regler, bis zu +15 dB Boost und einen internen Dip-Schalter zur Attack-Steuerung.

The SP Compressor has superb tone quality featuring a wide variety of compressor tones from vintage, to subtle, to modern and more.

It’s super flexible and features a dry blend knob, up to +15dB of boost and an internal dip switch for attack control.

Demo by ProGuitarShopDemos

Review by Ovnilab

Review by Squid Guitar

SP Compressor

Was haben die Sounds berühmter Gitarristen wie Page, EVH und Johnson gemeinsam? Sie alle nutzten die legendäre Echo-Maschine EP-3 als Vorverstärker. Wir haben diese Magie in einem neuen Xotic Effects-Pedal eingefangen: dem EP Booster. Wir haben die hochwertigsten verfügbaren Bauteile verwendet. Mit einem diskreten FET-Design und einem Ausgang mit niedriger Impedanz liefert der EP Booster bis zu +20 dB unverfälschten Boost mit multidimensionalen, schimmernden Höhen und Tiefen, ohne das Gehör zu ermüden. Über die internen DIP-Schalter können Sie die Boost-Frequenzen und EQ-Einstellungen wählen. Ein einfacher, reiner Boost, der dem magischen EP-3 Tribut zollt und die gefeierten Sounds der berühmtesten Spieler der Welt einfängt. Der EP-Booster – großartiger Sound beginnt hier!

What do the tones of renowned guitarist such as Page, EVH and Johnson have in common? They all used the legendary echo machine EP-3 as a pre-amp. We've captured that magic in a new Xotic Effects pedal, the EP Booster. We've used the highest quality parts available with a discrete FET design and low impedance output, the EP Booster provides up to +20dB of unadulterated boost with multi-dimensional, shimmering highs and lows, and no ear fatigue. The internal DIP switches let you choose the boost frequencies, and EQ settings. A simple pure boost that pays reverence to the magical EP-3 and captures the celebrated tones of the world's most famous players. The EP-Booster,great tone starts here!

Demo by Mike Hermans

Review by MJS Guitar

EP Booster

Für 7-12 FX-Pedale, 1 MOD-Slot - **598 x 236 mm / 23.54" x 9.29"** - erhältlich mit Gig Bag oder Flight Case

For 7 - 12 FX pedals, 1 MOD slot - **598 x 236 mm / 23.54" x 9.29"** - available with Gig Bag or Flight Case

amplified nation wonderland overdrive v2 combo board-copy

ch ray

The BoostBot is an always-on, ultra-compact clean boost with dynamic, real-time level display meter. The boost circuit is a classic op amp design, a clean and loud amplifier that sounds great and provides 20dB of boost. Displaying the signal level is a classic 10 Segment Bar Graph LED. Like all Dr. Scientist pedals the BoostBot can be used with guitar, bass, synths, and many other instruments.

Dr. Scientist

Demo by Feedback Pedals

Demo by Sound Isles

BoostBot

Denys Kozakov

Boss FZ-1W Fuzz

The BOSS TR-2 Tremolo is designed to provide guitarists with classic tremolo effects in an easy-to-use compact pedal. Dedicated "Wave," "Rate," and "Depth" knobs provide a multitude of effect possibilities.

Demo by PMTVUK

Demo by  Guitars, Music and Tech

Review by Musiker-Board

Review by Rig-Talk

Review by The Gear Check

TR-2 Tremolo

Fusion, eine relativ neue Musikrichtung, die Jazz und Rock, besonders den technischen "Shredder"-Stil der 80er Jahre, verbindet, hat Tom Quayle als eine seiner führenden Figuren. Trotz seines tiefen theoretischen Wissens fand Tom lange keinen passenden Effektpedal. Nach einer Zusammenarbeit mit Wampler Pedals im Jahr 2012 wurde das Dual Fusion entwickelt, mit zwei modifizierten Schaltkreisen aus dem Euphoria und Paisley Drive. Es bietet Klarheit, Kontrolle und einen Verstärker-ähnlichen Sound und spricht Gitarristen verschiedener Genres an.

Fusion, a relatively new genre blending jazz and rock, particularly the technical "shredder" style from the 80s, has Tom Quayle as one of its leading figures. Known for his deep theoretical knowledge and unique playing style, Tom struggled to find a pedal that matched his needs. After collaborating with Wampler Pedals in 2012, they developed the Dual Fusion pedal. It features two modified circuits from the Euphoria and Paisley Drive, designed to give Tom clarity, control, and amp-like response when stacked. The Dual Fusion has become a versatile tool for modern fusion guitarists and appeals to players of all genres.

Wampler

Review by guitarplanet.eu

Review by musicradar.com

Review by guitarfella.com

Review by guitarinteractivemagazine.com

Quick Start Guide

Demo by Har Maes

Demo by  Brett Kingman

Demo by  David Wallimann

Dual Fusion

Für 7-12 FX-Pedale, 1 MOD-Slot - **470 x 330 mm / 18.50" x 12.99"** - erhältlich mit Gig Bag oder Flight Case

For 7 - 12 FX pedals, 1 MOD slot - **470 x 330 mm / 18.50" x 12.99"** - available with Gig Bag or Flight Case

Der RockBoard Pedalboard Drawer ist eine simple aber extrem effiziente Lösung zum Organisieren und Verstauen von optionalem Zubehör in einem RockBoard Pedalboard. Der Pedalboard Drawer wurde entwickelt, um Zubehör wie Kabel, Plektren, Wireless Systeme und vieles mehr im MOD Slot des Pedalboards aufzubewahren. Durch den zentralen Zugang auf der Front des Pedalboards bietet der Drawer einen sichereren, sauberen und einfach zugänglichen Platz zur Aufbewahrung direkt am Setup. Durch die intelligente Arretierung der rotierenden Schublade ist eine zusätzliche Sicherung nicht notwendig.

- rotierende Schublade für RockBoard Pedalboards
- intelligenter Drehmechanismus mit sicherer Arretierung
- für Zubehör, Kabel, Wireless Systeme, Plektren, etc.
- passt in die MOD-Slot Aussparung von RockBoard Pedalboards (außer RockBoard DUO 2.0, 2.1, und 2.2)
- Material: Verstärktes Polyamid
- inkl. Montagematerial und Werkzeug
- Maße (B x T x H): 175 x 84,5 x 47 mm
- Gewicht: 150 g
- schwarz
- Hinweis: Nicht kompatibel mit den 19" Rack Panel Single oder Double (1U) - Rack Mount for RockBoard MOD

The RockBoard Pedalboard Drawer is a simple but super effective solution to organize and store optional accessories in your RockBoard pedalboard. The Pedalboard Drawer is designed to store accessories such as cables, picks, wireless systems and more directly in the MOD slot of the pedalboard. With access on the front of the pedalboard, the Drawer provides a safer, cleaner, and convenient place for storage. The Drawer opens and closes using an intelligent swivel locking mechanism.

- rotating mounting drawer for RockBoard pedalboards
- intelligent swivel locking mechanism
- for accessories, cables, wireless systems, etc.
- fits MOD slots in RockBoard pedalboards (except RockBoard DUO 2.0, 2.1, 2.2, and 2.3)
- material: reinforced polyamide
- incl. all mounting screws, counter nuts, and tools
- dimensions (W x D x H): 175 x 84.5 x 47 mm / 6 57/64" x 3 21/64" x 1 27/32"
- weight: 150 g / 0.33 lbs
- black
- Note: Not compatible with 19" Rack Panel Single or Double (1U) - Rack Mount for RockBoard MOD

Rotierende Schublade für RockBoard Pedalboards

Rotating Drawer for RockBoard Pedalboards

nova-bitch XL

Learn more about Dunlop BG95 Buddy Guy Cry Baby Wah wah pedal on PedalPedia - the most comprehensive online resource for effect pedals ▶️ Official specs, manuals, product videos and more