Kuba Furman

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 1 V2 ist eine Pass-Through-Box, die speziell für Gitarristen und Bassisten entwickelt wurde. Du kannst das MOD 1 V2 nutzen um mehrere Pedale deines Setups im Front End und im Effekt-Loop des Verstärkers zu postieren (4-Kabel Methode) oder die vier TRS-Anschlüsse als zentralen Zugang und Ausgang des Boards nutzen. Die XLR-Through-Verbindung kann als Signalausgang vom Pedalboard zum Mischpult oder zur PA verwendet werden.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 5 x 6,3 mm TRS thru
- 1 x XLR thru (männlich vorne / weiblich hinten)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 5 x 6,3 mm / ¼" TRS thru
- 1 x XLR thru (male front / female back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR, IEC & Barrel Patchbay

3 drives bass board

Clock

Digital clock

Max Ruppelt

The Microtubes X Ultra greatly expands on the already immense versatility of the Microtubes X7. Featuring all the great controls that its predecessor has that allows users to select exactly what frequencies they want to compress and saturate for the low and treble respectively, but with four major additions providing an additional layer of flexibility, while maintaining the same compact footprint, making it an extremely complete tool for the modern bassist.

Darkglass Electronics

Manual

Demo by The Bass Channel

Official Product Video

Product Page

Review by Mike Brooks, guitarworld.com

Review by Rainer Wind, bonedo.de

Microtubes X Ultra

Alex  Wilkins

When we released our original Compressor back in 2011, it quickly became a favourite among guitar and bass players alike who were searching for something more than the typical oversimplified controls found on most compressor pedals. Although our original Compressor sounded great on bass (and still does!) we set out to do even better. 
On top of the full range of features and controls normally only seen in high end studio equipment, such as input and gain reduction metering, independent attack and release controls, a mix knob for parallel compression, and an external sidechain insert, we’ve now added a fully variable sidechain high pass filter, and a two position ‘tone + colour’ circuit which adds gentle tone sculpting and harmonic distortion, giving your bass some delicious character.  

Empress Effects

Review by bassic

Review by CompressorPedalReviews

Demo by Pertybass

Demo by BassTheWorld.com

Bass Compressor Blue Sparkle

Tester

Line 6 HX Stomp Red Limited Edition ist ein professioneller Gitarrenprozessor, der den Klang von Helix-Verstärkern, -Boxen und -Effekten in einem ultrakompakten Pedal liefert. Egal, ob Sie lieber ein traditionelles Amp-and-Pedal-Setup spielen oder direkt auf die Bühne oder ins Studio gehen, HX Stomp lässt sich nahtlos in eine Vielzahl von Umgebungen und Anwendungen integrieren. Das HX Stomp-Gitarrenpedal verwendet dieselbe DSP- und HX-Modellierungstechnologie wie seine größeren Helix-Brüder und passt dennoch problemlos auf Ihr Pedalboard oder sogar in die Tasche Ihres Gigbags. Es gibt über 300 Ampere, Kabinen und Effekte – einschließlich eines Loopers. HX Stomp enthält dieselben HX-Modelle wie die Produkte der Helix-Familie sowie die Legacy-Effektbibliothek der Line 6 M-Series-Pedale und Stompbox-Modellierer wie den DL4. Verwenden Sie es als "Super-Stompbox", als Backup- oder Travel-Rig, als zusätzlichen Tonexpander in Kombination mit anderen Modellierern, als Audio-Interface - oder sogar als komplettes Gitarren- oder Bass-Rig.

Limited Edition HX Stomp Red!

Line 6 have been at the forefront of the digital modelling world for over 20 years now, pushing the boundaries of guitar technology is nothing new for them and their flagship product, the Helix, has taken the guitar world by storm. With the scaled down Helix, the HX, becoming a go to for players, its latest version, the HX Stomp is sure to generate loads of interest!

The HX Stomp is the ultimate streamlined version of this superstar pedal. Constructed as a 3 pedal unit, the HX Stomp features the same processor as the Helix, meaning you get over 300 effects including legacy lines from the M Series, 8 simultaneous amp, cab and effects blocks, TRS dual expression pedal inputs and a stereo effects loop, it's a serious pedal!

It's super comprehensive but really user intuitive. Built with the working player in mind, it has a solid aluminium construction that can take the rigours of the road, perfect on stage or in the studio, the Helix is the future of multi effects.

LINE 6

Review by musicradar

Review by bonedo

Demo by Guitar Bonedo

Demo by Bernd Kiltz - Gitarrenvideos

HX Stomp Red Limited Edition

PedalSafe Type L6

QuickMount Type L6

Pedal-Montageplatte für LINE6 HX Stomp Pedale

Pedal Mounting Plate for LINE6 HX Stomp pedals

Schutzabdeckung & RockBoard-Montageplatte für LINE6 HX Stomp Pedale

Protective Cover & RockBoard Mounting Plate For LINE6 HX Stomp pedals

Schutzabdeckung & universelle Montageplatte für LINE6 HX Stomp Pedale

Protective Cover & Universal Mounting Plate For LINE6 HX Stomp pedals

Mit dem OC-2 Octave-Pedal kannst du deinen Sound durch Hinzufügen von zwei zusätzlichen Tönen aufpeppen - eine und zwei Oktaven unterhalb der ursprünglichen Note. Jeder Ton hat einen separaten Lautstärkeregler und wird mit hervorragender Klarheit wiedergegeben.

The OC-2 Octave pedal lets users fatten up their sound by adding two additional tones--one and two octaves below the original note. Each tone has a separate volume control and plays back with outstanding clarity.

BOSS

Review by Reddit /guitarpedals

Review by TalkBass

Demo by Middle Aged Gear Junkie

Demo by Nick Granville

OC-2 Octaver

PedalSafe Type E1

QuickMount Type E

Pedal-Montageplatte für Standard-Boss-Pedale

Pedal Mounting Plate For Standard Boss Pedals

Schutzabdeckung & RockBoard-Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & RockBoard Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Schutzabdeckung & universelle Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & Universal Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Featuring the largest tuning display Peterson Tuners has ever incorporated into one of their pedal tuners, the StroboStomp HD boasts a high-definition, LCD screen that incorporates a variable color LED backlight. The user-selectable colors can be used to personalize the tuner or to increase display viewing quality in different levels of ambient lighting depending on the usage environment. The vibrant screen colors can also be assigned to stock or user presets to significantly reduce menu navigation time and increase on-stage tuning confidence at the gig.

Peterson

Review by Gitarre & Bass

Demo by The Time Preservation Society

Demo by EytschPi42

Demo by TalkingBass

Review by The Gear PAge

Review by TDPRI

Review by reddit /guitarpedals

StroboStomp HD

Terence Vignaud

The EBS MultiComp is the most popular EBS effects unit ever. Thousands of bass players, guitarists, and other musicians all over the world use it on their pedalboards. The compressor hits the sweet spot between allowing for dynamic playing and creating a smooth consistency across the fretboard. It can also be used simply to push the gain and beef up the overall sound when desired.

Demo by EBSSweden

MultiComp

Niclas Wego

Basierend auf dem gleichen Konzept und den Möglichkeiten des Flaggschiffs BOSS ES-8, ist der BOSS ES-5 eine minimal abgespeckte Version, die im deutlich kleineren Gehäuse daher kommt und somit ohne Mühe auch auf kleinere Pedalboards passt. Alle wesentlichen Bedürfnisse von Gitarristen und Bassisten werden auch hier bedient. Die kreativen Möglichkeiten für Pedalboard-Systeme, die der ES-8 ermöglicht, sind jetzt auch für kleinere Anwendungen erschwinglich. Erweitere dein Pedalboard mit dem kleinen ES-5 und du spielst in einer völlig neuen Liga. Von jetzt an wirst Du deine Effektpedale völlig anders einsetzen.

Based on the same concept and features as the flagship ES-8, the ES-5 is pared down to offer more practical and essential use options for typical guitarists and bassists, and is drastically reduced in size to fit ready-made, standard-size boards. The innovation in creativity of pedalboard systems made possible by the ES-8 has become more available and affordable. Expand your board just by one size and incorporate the ES-5, then you are in for a whole new world of musical expression, not just another utility tool. From this day on, the use of stompboxes will never be the same.

Review by Paul White, soundonsound.com

Review by Thomas Dill, bonedo.de

Demo by GUITARGUITAR

ES-5 Effects Switching System

Das MXR M287 Sub Octave Bass Fuzz ist ein wahrer Koloss unter den Bass-Effektgeräten und überzeugt mit einem markerschütternden Sound, der die Wände zum erzittern bringt. Hierbei addiert der Octaver, dessen Schaltung auf der Growl-Sektion des beliebten MCR Bass Octave Deluxe basiert, eine Oktave unterhalb des gespielten Tons für einen mächtigen Low End Punch. Darüber hinaus bietet das integrierte Fuzz nicht nur eine 2-Band Klangregelung für Bässe und Höhen, sondern auch zwei Voices. Während das erste Voicing einen warmen, sanft komprimierenden Sound liefert, überzeugt das zweite mit seiner helleren und aggressiveren Klangentfaltung. Damit der natürliche Charakter des verwendeten Basses und die Definition des Tons nicht verloren gehen, kann außerdem das trockene Signal stufenlos hinzugemischt werden, wobei der separate Mittenregler bei Bedarf für einen gesteigerten Punch sorgt.

The MXR M287 Sub Octave Bass Fuzz is a true colossus among bass effect units and impresses with a bloodcurdling sound that makes the walls tremble. The octaver, whose circuit is based on the growl section of the popular MCR Bass Octave Deluxe, adds an octave below the played tone for a powerful low-end punch. In addition, the integrated fuzz not only offers a 2-band tone control for bass and treble, but also two voices. While the first voicing delivers a warm, gently compressive sound, the second is convincing with its brighter and more aggressive sound development. To ensure that the natural character of the bass used and the definition of the tone are not lost, the dry signal can also be mixed in continuously, with the separate mid-range control providing an increased punch if required.

Demo by Low End University

Demo by Stompbox Breakdown 

Demo by Premier Guitar

Review by Premier Guitar

Review by Bonedo

M287 Sub Octave Bass Fuzz

M288 Bass Octave Deluxe

Der SansAmp Bass Driver DI ist viel mehr als nur eine Direktbox. Er kann große Vintage-Röhrensounds, helle moderne Slap-Sounds, knorrige Verzerrungen und alles dazwischen erzeugen. Drei verschiedene Ausgänge zum Ansteuern von Endstufen, Aufnahmepulten, PA-Mischpulten oder einfach zum Verbessern Ihres aktuellen Rigs. Zu den Reglern gehören Presence für die Definition und den oberen Obertongehalt, Blend, um das Verhältnis von Direktsignal und SansAmp-Schaltung zu kombinieren, und ein aktiver EQ, der mit 12 dB Absenkung oder Anhebung speziell auf den Bass abgestimmt ist.

Da die Popularität von 5- und 6-saitigen Bässen den Status einer Modeerscheinung überschritten hat und zum Mainstream geworden ist, haben wir einen Schalter hinzugefügt, mit dem die Bassfrequenz so eingestellt werden kann, dass sie auch in die tieferen Lagen reicht. Außerdem haben wir einen Regler für die Mitten und einen Schalter zur Einstellung ihrer Frequenz hinzugefügt. Der Kern des SansAmp Bass Driver und alle seine Töne bleiben dem ursprünglichen Design treu.

Much more than just a direct box, the SansAmp Bass Driver DI is capable of dialing up big vintage tube tones, bright modern slap sounds, gnarly distortions, and all in between. Three different outputs to drive power amps, recording desks, PA mixers, or simply enhance your current rig. Controls include Presence for definition and upper harmonic content; Blend to combine the proportion of direct signal and SansAmp circuitry; and active EQ specifically tuned for bass with 12dB of cut or boost.

With the popularity of 5- and 6-string basses going beyond fad status and becoming mainstream, we added a switch to adjust the bass frequency to extend into those lower registers. We also added a mid-range control and a switch to adjust its frequency. The core of the SansAmp Bass Driver and all of its tones remain true to its original design.

Tech 21

Review by bondeo

Demo by Philip Brennan

SansAmp BDDI V2

PedalSafe Type D2

QuickMount Type D

Pedal-Montageplatte für große horizontale Pedale

Pedal Mounting Plate For Large Horizontal Pedals

Schutzabdeckung & RockBoard-Montageplatte für große horizontale Pedale

Protective Cover & RockBoard Mounting Plate for Large Horizontal Pedals

Schutzabdeckung & universelle Montageplatte für große horizontale Pedale

Protective Cover & Universal Mounting Plate For Large Horizontal Pedals

The MXR Bass Envelope Filter delivers classic analog envelope filter sounds in an easy-to-use and compact pedal designed specifically for bass. Separate Dry and Effect controls let you dial in the perfect mix of effected and direct signals, so you can bring the funk without losing the low end. Its wide range of filter tones can be shaped with the Decay and Q controls, and a simple twist of the Sensitivity knob can tailor the pedal for your attack—as well as adjust for passive or active basses. The Bass Envelope Filter's power supply circuitry is designed to withstand over-voltage or polarity mishaps, and its true-bypass switching preserves your tone in bypass mode. It's all packaged in a durable, lightweight, Phase 90-size aluminum housing for the ultimate in portability and pedalboard space-saving dimensions.

Review by Talk Bass.com

Demo by The Bass Chanel

Demo by Bass Whisperer TV

M82 Bass Envelope Filter

Für 9-15 FX-Pedale, 1 MOD-Slot - **622 x 330 mm / 24.49" x 12.99"** - erhältlich mit Gig Bag oder Flight Case

For 9 - 15 FX pedals, 1 MOD slot - **622 x 330 mm / 24.49" x 12.99"** - available with Gig Bag or Flight Case

Oleksandr Lysenko

Bass Pedalboard V3 2024

ISP's Decimator II noise gate guitar pedal ups the ante over the original Decimator design to give you even better noise reduction. The Decimator II sports linearized Time Vector Processing in its expander tracking, giving you incredibly smooth sustained-note decay that's virtually free of release rippling. Connect a Decimator pedal between your guitar and amp's input and another in your effects loop, and you can link the two via 1/8" cable allowing both pedals directly track your input signal. For the ultimate in electric guitar noise reduction, put an ISP Decimator II in your signal chain.

Isp Technologies

Demo by Bernd Stein

Demo by session

Review by Strat-Talk

Review by Gearspace

Decimator II

Giuseppe Luzzi

Das Relay G30 Funksystem für elektrische Instrumente ist zwar kompakt und federleicht, befindet sich aber trotzdem in einem robusten Gehäuse aus Polykarbonat. Das erstaunlich anwenderfreundliche Relay G30 versteht sich vor allem als zuverlässiger Partner – ganz gleich, ob man es auf den Amp stellt oder ins Pedalboard integriert.

The Relay G30 instrument wireless system is compact and lightweight, while at the same time its rugged polycarbonate shell makes it dependably roadworthy. Refreshingly easy to use, the Relay G30 offers reliable performance whether the receiver is placed on your amp top or mounted to your pedalboard.

Relay G30

When it was introduced in 2010, the original POLYTUNE forever revolutionized the way musicians tune their instruments. Praised by professional and amateur players, guitar tuning instantly became as simple as Strum - Tune - Rock! So how do you make the best-selling polyphonic tuner even better? You take it to the next level by: providing multiple tuning modes, including polyphonic, chromatic, strobe and a variety of altered tunings; adding an onboard BONAFIDE BUFFER to preserve your tone over long cable runs and pedal board signal paths; and upgrading the LED display for even higher tuning accuracy. Say hello to your next tuner – POLYTUNE 3.

TC Electronic

Review by Charleston Classical Guitar

Demo by American Musical Supply

Demo by Addicted to Gear

Demo by realbeal

Polytune 3

PedalSafe Type G

QuickMount Type G 

Pedal-Montageplatte für Standard TC Electronic Pedale

Pedal Mounting Plate For Standard TC Electronic Pedals

Schutzabdeckung & RockBoard Montageplatte für Standard TC Electronic Pedale

Protective Cover & RockBoard Mounting Plate For Standard TC Electronic Pedals

Schutzabdeckung & universelle Montageplatte für Standard TC Electronic Pedale

Protective Cover & Universal Mounting Plate For Standard TC Electronic Pedals

Matthis LEMONNIER

The DigiTech® Drop is a dedicated polyphonic drop tune pedal that allows you to drop your tuning from one semitone all the way down to a full octave. Get down-tuned chunk without having to change guitars! The Drop also features a momentary/latching switch. With the switch set to momentary, you can turn the Drop into a true performance pedal. Fast trills and roller-coaster pitch dips are at the tip of your

DigiTech

Demo by Agufish

Demo by Reinaldo Lopez

Review by Guitar Gear Finder

Drop

QuickMount Type B

Pedal-Montageplatte für Standard-Einzelpedale

Pedal Mounting Plate For Standard Single Pedals

Kompressor Pedal für E-Bass
CHT "Constant Headroom Technology" für klare und saubere Tonqualität
Regler für Output, Input, Release, Attack und Ratio 
Led Kette mit 10 LED für "Gain reduction" Anzeige
Status-LED
True Bypass
stabiles Metallgehäuse
Betrieb mit 9V-Batterie oder Dunlop ECB-003 AC Adapter (optional)
Made in USA


Take your favorite studio compressor to the stage with the MXR M87 Bass Compressor. A complete array of controls (Attack, Release, Ratio, Input, and Output) makes it easy to fine-tune your sound, from subtle peak limiting to hard squashed compression effects. Its Constant Headroom Technology gives you plenty of headroom and clear performance. This totally transparent compressor allows your full dynamic range to shine through until your signal reaches the compression threshold, which is indicated by the ten, highly visible gain-reduction status LEDs. It´s all packed into a durable, lightweight aluminum-housing pedal that´s the size of a Phase 90.

Official Product Page

Review by awkwardsounds

Review by PREMIER Guitar 

Review by Compressor PedalReviews

Official Product Video 

Demo by Bass The World 

M87 Bass Compressor

Microtubes B7K v1

Für 7-11 FX-Pedale - **722 x 142 mm / 28.43" x 5.59"** - erhältlich mit Gig Bag oder Flight Case

For 7 - 11 FX pedals - **722 x 142 mm / 28.43" x 5.59"** - available with Gig Bag or Flight Case

1 for all

RB700 II 210

Trotz kompakter Maße hat dieser 4-Kanal Mixer einiges zu bieten! Für Klangqualität bei jeder Lautstärke sorgen seine rauscharmen 4580 Vorverstärker, die auch in unseren größeren Studiomischpulten zum Einsatz kommen. Verwenden Sie den MX400 zum Beispiel als Submixer für Ihr Mischpult: Falls bei bestimmten Anwendungen die Anzahl der regulären Mischpultkanäle nicht ausreicht, können Sie zum Beispiel die Ausgänge von drei Keyboards mit dem MX400 verbinden und diesen an einen Mischpultkanal anschließen. So haben Sie die Möglichkeit, Ihre Keyboards mit dem MX400 zu mischen, ohne gleich mehrere wertvolle Mischpultkanäle zu belegen.

Despite its ultra-compact size, the MICROMIX MX400 4-channel line mixer is really big on features! Providing the highest sonic quality at all output levels vs. the competition, the MX400 features ultra low-noise 4580 operational amplifiers for outstanding audio performance – the same chips as the ones found in its much bigger brethren.
Expanding on the capabilities of standard-size mixers is where the MX400 works its magic, for instance when it is used as a sub-mixer. If you are running short on available channels on your “big” mixer and need to add 3 more keyboards to your mix, just connect them to the MX400, dial-in the mix – and connect MX400’s output to a single input on your main mixer. This is just one example of how the MX400 can add versatility to your current setup – just imagine the possibilities!
The MX400 is the ideal solution for mixing multiple line-level signals on a budget. Sure, it’s as cute as a button – but you’ll want to own one because of what it brings to your performance. And the MX400 is so very affordable. Check one out at your Behringer dealer, or place an online order today!

Behringer

MX400

Manual Page

MT-2 Metal Zone

Antony Douch

Fusing classic BOSS octave tones with the latest tracking technologies, the BOSS OC-5 sets a new standard in octave pedal performance. Vintage mode provides a spot-on recreation of the legendary mono OC-2 from 1982, while Poly mode offers numerous enhancements for extended-range playing. And with the addition of an octave-up feature, a span of three octaves is now available for creative exploration. From fat, low mono sounds to octave-shifted chords and more, the OC-5 delivers the widest range, finest sound quality, and best playability in any octave stomp to date.

Review by Six String Sensei

Review by Guitar World

Demo by  Pepe Music

OC-5

The EHX Cock Fight Plus offers up the award-winning tone of the original Cock Fight in a rugged, lightweight pedal and with a traditional rack and pinion style operating mechanism. It contains two different expressive filters: a traditional wah pedal filter and a formant filter used for vowel sounds. The Cock Fight also features a lively fuzz section that can be added before or after the filter section, or taken out of the signal path completely.

Electro-Harmonix

Demo by PMTVUK

Review by Chris Loeffler, harmonycentral.com

Review by Paul Riario, guitarworld.com

Cock Fight Plus

QuickMount Type M

Pedal-Montageplatte für Dunlop Cry Baby Wah-Pedale

Pedal Mounting Plates For Dunlop Cry Baby Wah Pedals

Für 5-10 FX-Pedale, 1 MOD-Slot - **442 x 236 mm / 17.40" x 9.29"** - erhältlich mit Gig Bag oder Flight Case

For 5 - 10 FX pedals, 1 MOD slot - **442 x 236 mm / 17.40" x 9.29"** - available with Gig Bag or Flight Case

awer qwert

Minimalistic All-In-One Wireless pedalboard for bass guitar. Powered with a powerbank it is only have to be connected to an amp with a cable.

Wireless Bass Pedalboard with Cab-Sim

DITTO LOOPER is the looper you will try once and love for life – and you’ve gotta try it. We’ve built onto all that is good about the best loopers, trimmed all the nonessential, mood-killing tech hoopla, and designed a 5-minute looper that is intuitive, tons of fun, sounds great – and won’t break the bank!

Review by Gustavo Pereira, guitarspace.org

Review by Mudskipper, bassic.de

Demo by Sweetwater

Demo by Aaron Short Music

Ditto Looper

QuickMount Type L

Pedal-Montageplatte für Standard-Mini-Pedale

Pedal Mounting Plate For Standard Mini Pedals

DD-7 Digital Delay

The Hyper Luminal Compressor features the first hybrid design in a compressor pedal: an analog VCA controlled by a digital side-chain allowed us to capture and include the characters of some of the most legendary compressors in history while keeping the signal path completely analog.