daan luchtman

Das RockBoard MOD 4 - All-in-One Wireless System Receiver + Patchbay für Pedalboards bietet eine einfach zu realisierende, kabellose Verbindung zwischen deinem Instrument und deinem Pedalboard. Dabei nutzt es eine digitale Wireless Technologie, die eine beeindruckende Klangqualität, ein einfaches Setup und eine zuverlässige Nutzung für aktive Musiker garantiert. Das Wireless System arbeitet im 2,4 GHz ISM Band und kann so weltweit ohne Beschränkungen genutzt werden. Mit einem nutzbaren Frequenzbereich von 20 Hz - 20 kHz und nur 5 ms Latenz bleiben keine Wünsche offen. Die Patchbay-Sektion wurde entwickelt um Verbindungen und Anschlüsse des Pedalboards von der Unterseite nach außen zu führen, dir einen zentralen Zugangspunkt zu deinem Setup zur Verfügung zu stellen und um deine Kabelwege aufzuräumen und sortieren zu können. Die A, B, C und D TRS Buchsen sind als direkte, durchgängige Verbindungen von der Vorderseite des MOD 4 zu den entsprechenden Buchsen auf der Rückseite verkabelt. Damit kannst du deine Effekt-Kette so einrichten, dass du bei der Vorbereitung auf den Gig lediglich Kabel an der Vorderseite des Boards einstecken musst, anstatt unter dem Board zu hantieren.
- Wireless System Receiver + Patchbay für Pedalboards, inkl. Wireless Transmitter
- 2,4 GHz ISM Band für weltweite Nutzung
- 30 m durchschnittliche Reichweite (ohne Hindernisse)
- 24 bit / 48 kHz unkomprimierte digitale Signalübertragung
- 20 Hz - 20 kHz Frequenzbereich
- 5 ms Latenz
- 103 dB Dynamikbereich
- 85 dBm HF-Empfindlichkeit
- 0.2% Verzerrung (THD)
- 4 wählbare Kanäle
- passend für MOD Slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe anderer Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 4x 6,3 mm Stereo-Klinke Thru (TRS)
- 1x 6,3 mm Mono-Klinke Receiver Audio Ausgang (TS)
- 1x DC 2,1 x 5,5 mm Hohlstecker Thru
- 1x AC IEC Thru
- 1x USB Type A Charge Ausgang
- Stromversorgung via optionalem 9V DC Netzteil, 2.1 x 5.5 mm Hohlstecker, Polarität (-) innen
- Batteriebetrieb nicht unterstützt
- Stromaufnahme 500 mA
- passiver Betrieb möglich (nur Patchbay, ohne Wireless System)
- Abmessungen mit Frontplatte (B x T x H): 175 x 85 x 47 mm
- Abmessungen ohne Frontplatte (B x T x H): 160 x 85 x 33 mm
- Gewicht 500 g
- Wireless Transmitter, zwei Antennen, ein USB Kabel, Montageschrauben und Muttern im Lieferumfang enthalten

The RockBoard MOD 4 - All-in-One Wireless System Receiver + Patchbay for Pedalboards offers an easy-to-use wireless connection between your instrument and your pedalboard, featuring digital wireless technology that delivers incredible audio quality, a simple setup procedure, and reliable use for any gigging musician. The wireless system works in the 2.4 GHz ISM band for unlimited worldwide use and offers a full 20 Hz - 20 kHz frequency range with only 5 ms of latency. The patchbay module is designed to route connections from underneath your pedalboard to its front, giving you a central access point and tidying up your connections. The A, B, C, and D TRS sockets are wiring thru-connections from the front of MOD 4 to the corresponding sockets on the back. This allows you to connect your pedals permanently underneath the board, so you only have to connect cables to and from the front of the board, instead of having to route underneath it when setting it up for a gig.
- wireless system receiver + patchbay for pedalboards, incl. wireless transmitter
- compatible with guitar wireless system
- 2.4 GHz ISM band for worldwide use
- 30 m / 100 ft. approx. range (without obstacles)
- 24-bit / 48 kHz uncompressed digital transmission
- 20 Hz - 20 kHz frequency range
- 5 ms latency
- 103 dB dynamic range
- 85 dBm RF sensitivity
- 0.2% total harmonic distortion
- 4 selectable channels
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- detachable front plate for mounting on top or underneath pedalboards
- 4x 6.3 mm / 1/4" stereo thru (TRS)
- 1x 6.3 mm / 1/4" mono receiver audio output (TS)
- 1x DC 2.1 x 5.5 mm barrel thru
- 1x AC IEC thru
- 1x USB Type A charge output
- power supply via optional 9V DC power adapter, 2.1 x 5.5 mm barrel plug, polarity (-) center
- battery operation not supported
- current draw 500 mA
- passive operation possible (patchbay only, without wireless system)
- dimensions with front plate (W x D x H) 175 x 85 x 47 mm / 6 57/64" x 3 11/32" x 1 27/32" 
- dimensions without front plate (W x D x H) 160 x 85 x 33 mm / 6 19/64" x 3 11/32" x 1 19/64"
- weight 500 g / 1.1 lbs
- incl. wireless transmitter, two antennas, USB charging cable, mounting screws, and counter nuts

2.4 GHz Guitar Wireless Receiver, Transmitter + TRS Patchbay

New Pedal Board

DELETED USER

Der Dunlop CBM95 Cry Baby Mini ist ein kompaktes Wah-Pedal, das klassische Cry-Baby-Wah-Sounds in einem verkleinerten Gehäuse bietet. Es verfügt über einen dreistufigen Voicing-Schalter, mit dem sich verschiedene Wah-Frequenzbereiche auswählen lassen, die auf Vintage-Cry-Baby-Schaltungen basieren. Das Pedal verwendet denselben Fasel-Induktor wie traditionelle Cry-Baby-Modelle, um den vertrauten Klangcharakter zu erhalten. Das kleinere Gehäuse ist für Pedalboards mit begrenztem Platz konzipiert und bewahrt dennoch das Spielgefühl und den Regelweg eines Full-Size-Wahs. Das CBM95 besitzt ein robustes Metallgehäuse für den Einsatz auf der Bühne. Es gehört zur modernen Cry Baby Mini Serie von Dunlop.

The Dunlop CBM95 Cry Baby Mini is a compact wah pedal designed to deliver classic Cry Baby wah tones in a reduced footprint enclosure. It features a selectable three-position voicing switch that allows the player to choose between different wah frequency ranges inspired by vintage Cry Baby circuits. The pedal uses the same Fasel inductor found in traditional Cry Baby models to maintain familiar tonal character. Its smaller housing is intended for pedalboards where space is limited while retaining the feel and sweep of a full-size wah. The CBM95 is built with a durable metal chassis for live performance use. It is part of Dunlop’s modern Cry Baby Mini series.

Dunlop

Product Page

Manual

Official Product Video

Review by bonedo

Review by Music Radar

Guide to Cry Baby Wahs by Jim Dunlop

CBM95 Cry Baby Mini Wah

QuickMount Type M

Pedal-Montageplatte für Dunlop Cry Baby Wah-Pedale

Pedal Mounting Plates For Dunlop Cry Baby Wah Pedals

Pietro Modonesi

Pigtronix

Demo by Pigtronix

Star Eater

Aarón Ayala Vásquez

The Volume (X) Mini Pedal controls volume and FX parameters without crowding your pedalboard, featuring a lightweight aluminum chassis, aggressive non-slip tread, and our patented Low Friction Band-Drive for a smooth range of motion and consistent, reliable performance. For maximum comfort and precision, the DVP4's rocker tension is fully adjustable.

Volume mini

Sebastian Hübner

Das RC-500 ist ein unverzichtbarer Partner für Gitarristen, Singer/Songwriter, Multi-Instrumentalisten und alle, die ihre Looping-Performance auf die nächste Stufe heben wollen. Erzeuge Kompositionen in Echtzeit: zur Verfügung stehen dir zwei Loop-Spuren, Eingänge für Mikrofon und Stereo-Instrument, Rhythmen und inspirierende Loop-Effekte in hochwertiger 32 Bit Audioqualität. Speichere Loops auf den internen Speicherplätzen und entdecke die erweiterten Steuerungsmöglichkeiten über externe Controller und MIDI. Das RC-500 ist vollgepackt mit Loop-Station-Funktionen der nächsten Generation und liefert kreativen Musikern sämtliche Werkzeuge, um neue Ideen auszuarbeiten und eindrucksvolle Performances zu kreieren, von denen das Publikum nicht genug bekommen wird.

The RC-500 is an essential partner for guitarists, singer/songwriters, multi-instrumentalists, and anyone who wants to take their looping to the next level. Craft real-time compositions with two loop tracks, mic and stereo instrument inputs, rhythms, and inspiring Loop FX, all backed by premium 32-bit audio quality. Store loops in onboard memories, and explore expanded operation with external controls and MIDI. Filled with next-generation Loop Station features, the RC-500 gives serious creators the tools they need to develop new ideas and deliver impactful performances that will leave audiences wanting more.

BOSS

Demo by PMTVUK 

Demo by Andertons Music Co

Review by Dimitri, amazona.de

Review by Chris Corfield, guitarworld.com

Parameter Guide

RC-500 Loop Station

QuickMount Type J1

Pedal-Montageplatte für BOSS DD-500, MD-500, RC-500 & RV-500 / STRYMON BigSky, Mobius & TimeLine Pedale

Pedal Mounting Plate for BOSS DD-500, MD-500, RC-500 & RV-500 / STRYMON BigSky, Mobius & TimeLine pedals

Tester

Der Mooer Audio Graphic G bietet volle Kontrolle über die wichtigsten Frequenzbereiche der E-Gitarre. Der grafische Equalizer im handlichen Pedalformat bietet maximale klangliche Flexibilität. Darüber hinaus ist der Graphic G dank seines robusten Metallgehäuses und der klassischen True-Bypass-Schaltung absolut roadtauglich.
Frequenz-Zentren: 100Hz, 250Hz, 630Hz, 1,6kHz, 4kHz
±18dB einstellbarer Verstärkungsbereich pro Band

The Mooer Audio Graphic G offers full control over the most important frequency ranges of the electric guitar. The graphic equalizer in a handy pedal format offers maximum tonal flexibility. In addition, the Graphic G is absolutely roadworthy thanks to its robust metal housing and classic true bypass circuit.
Frequency Centers: 100Hz, 250Hz, 630Hz, 1.6kHz, 4kHz
±18dB adjustable gain range per band

MOOER

Official Product Page

Mooer Graphic G - Review by Gitarzysta [PL], [09-2020]

Demo by  Prymaxe

Review by talkbass.com

Demo by Ryan Hoffer

Review by acousticguitarforum.com

Review by thegearpage.net

Demo by musicexpresscanada

Graphic G

PedalSafe Type K1

QuickMount Type K

Pedal-Montageplatte für Mooer Micro Series Pedale und ToneX One

Pedal Mounting Plate For Mooer Micro Series Pedals and ToneX One

Schutzabdeckung & RockBoard-Montageplatte für MOOER Micro Series Effektpedale

Protective Cover & RockBoard Mounting Plate for MOOER Micro Series effect pedals 

Schutzabdeckung & universelle Montageplatte für MOOER Micro Series Effektpedale

Protective Cover & Universal Mounting Plate For MOOER Micro Series effect pedals 

High quality digital reverb pedal , using a 32 bit fixed point DSPchip
Three reverb modes: Studio/ Church/ Plate
Studio: warm & natural indoor reverb, and the decay knob can show different
sizes of indoor reverb effects
Church: church reverb, empty and smooth natural reflex reverberation
Plate:plate reverb, let the steel or gold tinsel vibrate and get the man-made
mixed sound by refering to the vibration frequency
Full metal shell
Very small and compact design

True bypass switch

Video

Demo by  Anthony Brown

Review by Bieke, effectsdatabase.com

Review by Mario Seifarth, musiker-tv.com

Sky Verb

3 Delay Modes: Analog/Real Echo/Tape Echo

Analog: Simulates a warm and smooth echo sound created by classic analog delay equipment.

Real Echo: Simulates a natural echo sound in real environment.

Tape Echo: Simulates the sweet and spacy echo sound from a

Delay Time: 5ms~780ms

vintage tape echo machine.

Full metal shell

Very small and exquisite

True bypass

Muzikus Review

Demo by Craig Medlin

Demo by Prymaxe

Reecho

Francisco Ferreira

VISION is a dual channel modulation pedal, supporting stereo input and output. Both of the two effects have independent SPEED/RATE, CONTROL, and DEPTH/MIX knobs. In the middle of the panel, a 3-position toggle switch is used for choosing the sequence of the two effects’ output. Besides, each channel features 9 effects, you can adjust various tones with the independent Tap Tempo control.

JOYO

Review by Pedal of the Day

Review by Premier Guitar

Demo by Superdanger Studios

R-09 Vision

David Litaba

The Lil’ RAT features the same controls and tone as the full sized RAT, but only 2 inches wide. It’s built like a tank with rear mounted power and audio jacks. At half the size, this pedal conserves valuable pedalboard real estate, and provides full-sized RAT tones, attack and sustain.

The beauty of the Lil' RAT lies in its versatility.  Used as a primary distortion, it excels at arena rock rhythm tones and soaring leads.  Do you have a powerful amp with too much headroom for the gig?  Let the Lil' RAT be your dirty channel.  Maybe you already love your amp’s distortion.  Use the Lil' RAT as a boost for solos and get the extra kick you need.

The Lil' RAT features the legendary RAT filter control.  Turn it to the right to roll off brittle high-end frequencies.  Having trouble cutting through the mix?  Turn it to the left and allow the natural brightness of your instrument to shine through.

Distortion dials in the perfect amount of gain – from mild overdrive to full out fuzzy assault, and the volume control lets you dial it in just perfectly against your bypassed clean tone.

ProCo

Demo by  K Sakuma

Demo by  Rhythm & Beard

Review by reddit /guitarpedals

Review by The Gear Page

Review by musicradar

Lil' RAT

anthony leroux

Die beiden Fußschalter des VLP-200 steuern unabhängig voneinander die Aufnahme und Wiedergabe von LOOP 1 und LOOP 2! Die beiden integrierten Looper-Kollaborationsmodi (SERIAL & FREE) ermöglichen die einfache parallele Wiedergabe von zwei Loops oder den Übergang von Songabschnitten zwischen zwei Loop-Spuren.

The VLP-200's dual footswitches independently control the recording and playback of LOOP 1 and LOOP 2! Its two built-in looper collaboration modes (SERIAL & FREE) allow for easy parallel playback of two loops or transition song sections between two loop tracks.

Valeton

Demo by JohnPaul Music UK

Demo by Pair of Pandas

Demo by  Andertons Music Co

Review by Delicious Audio

Review by Bonedo

VLP-200

Eno Music

EX Squeezer Compressor

Süß, nuanciert und ultra-ausdrucksstark – der BD-2 Blues Driver ist eine bleibende Ikone in den Annalen des Gitarren-Overdrive. Sein einflussreiches analoges BOSS-Schaltungsdesign verhält sich wie ein Röhrenverstärker und bietet eine natürliche, berührungsempfindliche Verstärkung, die mit herkömmlichen Overdrive- und Distortion-Pedalen nicht möglich ist. Fast drei Jahrzehnte später verleiht der artikulierte Klang des BD-2 den Klängen von Spielern aller Musikgenres, von Blues und Rock bis hin zu Country, Jazz und darüber hinaus, weiterhin Kraft.

Sweet, nuanced, and ultra-expressive, the BD-2 Blues Driver stands as an enduring icon in the annals of guitar overdrive. Its influential BOSS analog circuit design behaves like a tube amp, providing natural, touch-responsive gain that’s not possible with standard overdrive and distortion pedals. Nearly three decades on, the BD-2’s articulate voice continues to power the sounds of players in every musical genre, from blues and rock to country, jazz, and beyond.

Demo by Wampler Pedals

Demo by The Pedal Bored

Review by Guitar Pedal Demos

BD-2 Blues Driver

PedalSafe Type E1

QuickMount Type E

Pedal-Montageplatte für Standard-Boss-Pedale

Pedal Mounting Plate For Standard Boss Pedals

Schutzabdeckung & RockBoard-Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & RockBoard Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Schutzabdeckung & universelle Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & Universal Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Szabolcs Oláh

Ibanez TUBE SCREAMER Mini Overdrive-Pedal - Mini-Ausführung für mehr Platz auf dem Pedalboard - 100% Analog, True Bypass

The Ibanez Tube Screamer is one of the most beloved pedals in the world. Its ability to be used as a medium to low gain overdrive as well as being able to run as a clean or low gain boost made this a very popular pedal. This Mini Tubescreamer will fit on even the smallest of pedalboards without losing any quality of the original signal.

Ibanez

Review by GIGS & GUITARS

Review by Tone Pedia 

Demo by Alex Dinky 

Demo by Marty Music 

Demo by Ibanez Guitar 

Tube Screamer Mini

QuickMount Type UV

Universal-Pedal-Montageplatte für vertikale Pedale

Universal Pedal Mounting Plate For Vertical Pedals

Nichts klingt schlimmer als eine verstimmte Gitarre oder ein verstimmter Bass. Mit dem CPT-20 Bodenpedal Tuner hast du die Stimmung jederzeit unter Kontrolle. Das große LCD-Display und die drei LEDs helfen dir, dein Instrument nicht nur präzise, sondern auch extrem schnell zu stimmen. Es deckt einen großen Stimmbereich von A (27,5 Hz) bis C (4168 Hz) mit einer Genauigkeit von +/- 1 Cent ab. Mit seinen kompakten Maßen von 95 x 46 x 49 mm nimmt es keinen wertvollen Platz auf dem Pedalboard weg. Stimm dich also mit dem CPT-20 ein.

Nothing sounds worse than a guitar or bass that’s out of tune. The CPT-20 floor pedal tuner lets you keep your tuning under control at all times. The large LCD and three LEDs help you tune your instrument not just precisely but also extremely quickly. It covers a wide tuning range from A (27.5 Hz) to C (4168 Hz) at a precision of +/- 1 cent. With its compact size of 95 x 46 x 49 mm, it won’t take up much valuable pedal board real estate. So tune up with the CPT-20: you’ll never look back.

Harley Benton

Product Page 

Demo by The Bedroom Rocker

Demo by EytschPi42

Demo by  @user-ys1sg6oo2n

Review by reddit.com/r/Bass

Review by guitarworld.de

Review by amazona.de

Review by musicngear.de

CPT 20 Tuner

PedalSafe Type L

QuickMount Type L

Pedal-Montageplatte für Standard-Mini-Pedale

Pedal Mounting Plate For Standard Mini Pedals

Schutzabdeckung & RockBoard-Montageplatte für MXR, PIGTRONIX, XOTIC, XVIVE und viele weitere Pedale mit Mini Gehäusen

Protective Cover & RockBoard Mounting Plate For MXR, PIGTRONIX , XOTIC, XVIVE and many other effect pedals in mini enclosures 

Schutzabdeckung & universelle Montageplatte für MXR, PIGTRONIX, XOTIC, XVIVE und viele weitere Pedale mit Mini Gehäusen

Protective Cover & Universal Mounting Plate For MXR, PIGTRONIX , XOTIC, XVIVE and many other effect pedals in mini enclosures 

Für 9-14 FX-Pedale, 2 MOD-Slots - **722 x 236 mm / 28.43" x 9.29"** - erhältlich mit Gig Bag oder Flight Case

For 9 - 14 FX pedals, 2 MOD slots - **722 x 236 mm / 28.43" x 9.29"** - available with Gig Bag or Flight Case

Ryan Denmark

This board is battery-powered for silent practice and portability.  It can also be used as a backup pedal in case of other failures.  

Mini Board

Tristan NDinga

Ampero multi-effects processor proved itself to be a game changer for its huge tone, great versatility and tiny size. Since first launched, it quickly become popular among both starters and pro musicians. For the best possible portability, the footswitch amount on Ampero is limited – however for the players who want more flexibility on this unit, that's not enough…So here it comes the Ampero Switch, Ampero's best pal!

The Ampero Switch is an ultra compact momentary footswitch controller designed not only for Ampero, but also for other devices with momentary footswitch controller support. Featuring the same Aluminum casing and appearance theme design, Ampero Switch definitely matches your Ampero's vibe perfectly. Carefully selected footswitches and other components ensure comfortable switching and excellent endurance.

It's quite simple: connect the TRS jack to Ampero's EXP 2/FS jack with the attached TRS cable, then enter Global menu, find EXP 2/FS sub menu, set MODE to Dual FS. After this, you can assign any function you need to the footswitches.

HOTONE

Demo by HotoneAudio

FS-1 Ampero Switch

Lee Atkin

Der Valeton GP-50 ist ein kompakter Multi-Effektprozessor und IR-Loader der neuen Generation. Er basiert auf dem GP-5 und bietet mehr Leistung, Konnektivität und Kontrolle. Das Gerät enthält über 100 Effekte, unterstützt Drittanbieter-IRs und ist über Valetons SnapTone-System mit Neural-Amp-Modellen kompatibel. Es dient außerdem als Audio-Interface, Looper, Drum-Machine und Tuner und kann bis zu neun Effektmodule gleichzeitig betreiben. Mit einem wiederaufladbaren 1450 mAh-Akku, Bluetooth 5.0, MIDI-I/O und USB-Audio bietet der GP-50 volle Leistung im Format eines kompakten Pedals.

The Valeton GP-50 is a next-generation compact multi-effects processor and IR loader. It builds on the GP-5, offering more power, connectivity, and control. The unit includes over 100 effects, support for third-party IRs, and compatibility with Neural Amp Models through Valeton’s SnapTone system. It functions as an audio interface, looper, drum machine, and tuner, and can run up to nine effects modules at once. With a rechargeable 1450 mAh battery, Bluetooth 5.0, MIDI I/O, and USB audio, it delivers full performance in a portable pedal-sized form.

Official Website

Review by Guitar Thrills Magazine

Review by Gear News

Demo by Pedal of the Day

Demo by Riffs & Rig

Demo by Pedalboards Of Doom

GP-50

Márcio Ferreira

Luminite

Für 3-5 FX-Pedale - **318 x 142 mm / 12.52" x 5.59"** - erhältlich mit Gig Bag

For 3 - 5 FX pedals - **318 x 142 mm / 12.52" x 5.59"** - including Gig Bag

Based on the principle of emphasizing the operation suited for live performance, the GP-200 has leveled up both inside and out drastically to fit the role of your ideal stage partner.

GP-200

Valeton  Coral  Amp  is  a  quality  amp  modeling/preamp  pedal  featuring  16  legendary  amplifiers  ready  for  any  music  style.  Plus,  each  amp  type  has  it's  own  dedicated  cab  sim  so  you  can  sound  huge  straight  to  the  PA  or  into  your  DAW.

Demo by Thiago Henrique

Demo by resington

Review by Talk Bass.com

Review by Ultimate Guitar

Coral Amp

The Dapper Dark Mini features a boost module with a mute tuner, a high-gain module with noise reduction, a chorus module for creating a jazz-like tone, and an analog-voiced delay mode with tap tempo. This means you can get a range of sounds from clean and crisp to heavy and distorted, all from one pedal.

Demo by DOREMi Sound & Light

Dapper Dark Mini

Dapper  Amp  Mini  is  a  seriously  potent  effects  strip  that  combines  legendary  high  quality  amp  tone  and  fine  tuned  effects  in  one.  This  mini  strip  has  everything  you  need.

Review by AMAZONA

Demo by RobzFreak

Dapper Amp Mini

VLP-200 von Valeton