George Zafeiriou

85x50

Tester

The SUPER SYNTH turns your bass into a synthesizer—with seriously cool sounds and no tracking delay! It also doubles as a digital octaver, with both octave up and octave down layers. The parameters of the pedal’s presets can be modified using the Markbass Pedal Controller software. Simply install the software, connect the pedal to your computer using a USB cable, modify the presets as desired, and then load them back onto the pedal. Like all our pedals, this unit features true bypass.

Markbass

Product Page

Super Synth

Die MB Mini-Pedalserie von Markbass wird auf dem gleichen hohen Qualitätsniveau wie unsere Standard-Effektlinie hergestellt, verwendet aber ein ultrakompaktes, leichtes Gehäuse. Kleiner als andere Stompboxen, passen diese unglaublich klingenden Pedale selbst auf die vollsten Pedalboards, und der 9-12V-Strombedarf bedeutet, dass Sie sie mit jedem Standard-Netzteil verwenden können.
Verleihe deinem Pedalboard einen „Boost“ mit dem MB Mini Boost, der auch unseren variablen Preshape-Filter enthält (hebt die Tiefen und Höhen an und senkt die Mitten).

The MB Mini series of pedals from Markbass is made to the same high quality level as our standard effect line, but uses an ultra-compact, lightweight chassis. Smaller than other stompboxes, these incredible-sounding pedals will fit onto even the most crowded pedal boards, and the 9-12V power requirement means you can use them with any standard power supply.
Give your pedalboard a “boost” with the MB Mini Boost—which also features our Variable Preshape Filter (boosts lows and highs, and cuts mids).

Demo by Pepo Vidal

Official Product Video

Review by Talk Bass.com

MB MINI BOOST

Der MARKBASS COMPRESSORE ist ein hochmodernes Komprimierungstool mit einer ECC81 Roehre im Signalweg.
Diese bietet einen satten und warmen Klang voller Obertoene im komprimierten Signal. Deshalb muesste er eigentlich TUBE COMPRESSORE heißen.
Weiterhin verfuegt der MARKBASS COMPRESSORE ueber alle wichtigen Funktionen eines Kompressors, die man mit den Reglern GAIN, THRESHOLD, RATIO, ATTACK, RELEASE und VOLUME einstellen kann.
Auch ein TRUE BYPASS ist vorhanden! Das bedeutet, bei ausgeschaltetem Kompressor geht das Signal direkt von der Eingangsbuchse zur Ausgangsbuchse, ohne die Audioqualitaet zu beeintraechtigen.

The MARKBASS COMPRESSORE is a state-of-the-art compression tool with an ECC81 tube in the signal path.
This provides a rich and warm sound full of harmonics in the compressed signal. That's why it should really be called TUBE COMPRESSORE.
The MARKBASS COMPRESSORE also has all the important functions of a compressor, which can be adjusted using the GAIN, THRESHOLD, RATIO, ATTACK, RELEASE and VOLUME controls.
There is also a TRUE BYPASS! This means that when the compressor is switched off, the signal goes directly from the input socket to the output socket without affecting the audio quality.

Demo by tune4media

Review by OVNI LABS

Review by bonedo

Review by Compressor Pedal Reviews

Manual

Compressore

David Litaba

The Microtubes Infinity shares the footmark of our programmable line, packed with our three legendary Microtubes distortions: B3K, Vintage, and X. Moreover, it allows multiband compression on every mode, blending Impulse responses between distortions while adding extra controls via the Darkglass suite for an endless number of features: An infinity of possibilities.

Darkglass Electronics

Demo by  Pair of Pandas

Demo by Paajanenae

Review by TalkBass.com

Review by Rainer Wind, bonedo.de

Demo by Darkglass Electronics

Microtubes Infinity

Der EHX TriParallel Mixer ist ein leistungsstarker Hub für die Erstellung und Mischung von Effekten mit drei separaten Effektschleifen und flexiblen Bedienelementen für vielfältige Konfigurationen.

Der TriParallel Mixer ist angesichts seines Funktionsumfangs überraschend kompakt und dank seiner intuitiven Bedienelemente und Ein-/Ausgänge einfach zu bedienen.

Verwenden Sie ihn, um zwischen bis zu drei separaten Effektschleifen zu wechseln oder sie zu mischen. Senden Sie den Ausgang einer Gitarre oder eines anderen Instruments an drei separate Verstärker oder geben Sie drei separate Instrumente ein, um zwischen ihnen zu wechseln oder sie auf einen einzigen Ausgang zu mischen. Mischen Sie Effekte parallel, um Klänge zu erzeugen und Optionen zu nutzen, die bei der seriellen Verwendung von Effekten (nacheinander) nicht möglich sind.

The EHX TriParallel Mixer is a powerful effects creation and mixing hub with three separate FX loops and flexible controls allow for multiple configurations.

The Tri Parallel Mixer is surprisingly compact considering the level of functionality it provides, while its intuitive controls and I/O make it easy to operate.

Use it to switch between or mix up to three separate effects loops. Send a guitar or other instrument out to three separate amplifiers, or input three separate instruments to switch between or mix to a single output. Mix effects in parallel to create sounds and allow for options not possible when using effects in series (one after another).

Electro-Harmonix

Demo by Gaving Forbes Music

Review by Guitar Player

Review by Gear News

Tri Parallel Mixer

PedalSafe Type O

QuickMount Type O

Pedal-Montageplatte für FRIEDMAN Overdrive Deluxe & WALRUS Descent Pedale

Pedal Mounting Plates for FRIEDMAN Overdrive Deluxe & WALRUS Descent pedals

Schutzabdeckung & RockBoard-Montageplatte für FRIEDMAN Overdrive Deluxe & WALRUS Descent Pedale

Protective Cover & RockBoard Mounting Plate For FRIEDMAN Overdrive Deluxe & WALRUS Descent pedals

Schutzabdeckung & universelle Montageplatte für FRIEDMAN Overdrive Deluxe & WALRUS Descent Pedale

Protective Cover & Universal Mounting Plate For FRIEDMAN Overdrive Deluxe & WALRUS Descent pedals

Amazingly powerful and ultra-versatile, GT-1000CORE delivers the most complete guitar and bass processing experience available in a single stompbox. The full DSP muscle of the flagship GT-1000 lives inside this mini juggernaut, driving class-leading sound quality, advanced AIRD technology, 24 simultaneous effects blocks, and over 140 unique amp/effect types for unlimited creative expression. GT-1000CORE fits into any pedalboard setup and works equally well as a standalone processor for playing live and in the studio. And with flexible I/O and vast control support, it’s right at home as the core of any rig.

BOSS

Review by The Gear Page

Review by reddit /guitarpedals

Review by guitar pedal X

Demo by  Bernd Kiltz - Gitarrenvideos

GT-1000 CORE

Passive to active and back again with no hassle.
The Radial Tonebone Bassbone is a smart EQ/DI pedal that manages your bass signal with 2 separate channels and a powerful EQ that overrides the preamp's tone settings. The Tonebone allows switching between a traditional passive bass and a modern active bass during a gig without lengthy and awkward adjustments to the preamp, EQ, amp, and instrument level. This EQ and DI Box can also be used with a single bass to provide 2 separate signals finessed by its incredible enhancement capabilities. The integrated boost, variable gain, and effects loop can be used individually or together. A balanced XLR out sends the complete signal direct to the board for PA-only gigs and studio time. Added heft and punch to your tone is like a secret weapon. The Radial Tonebone Bassbone is powered by a 15VDC power supply.

Radial Engineering

Review by bonedo.de

Demo by Premier Guitar 

Demo by Pertybass

Tonebone Bassbone  V1

Designed to be the perfect complement to our distortion circuits, the flexibility and portability of the Harmonic Booster is also the perfect one-stop solution for gigging musicians in search of a precise and harmonically rich clean preamplifier.

Demo by Stuart Clayton

Review by Naris Sebastian Stolz, amazona.de

Demo by BassTheWorld

Harmonic Booster

David Graves

The Cali76 Bass Compressor is a studio-grade compressor pedal inspired by the world-famous Urei® 1176® studio compressor, heard on many of the greatest studio recordings since the 1960s. The Cali76 Bass Compressor uses uncompromising all-analogue circuitry to make these distinctive, ultra-fast FET compression tones available to the modern guitarist.

The latest in a long lineage of Cali76 compressors, the Cali76 Bass Compressor features a full set of studio-style controls, a DRY knob for parallel compression and an improved sidechain that matches the response of our sought-after “large format” Cali76 – the pedal that put Origin Effects on the map back in 2012.

With a 10-LED gain reduction meter, a pedalboard friendly enclosure and massive headroom thanks to internally increased voltage, the Cali76 Bass Compressor marks the culmination of over a decade of experience making the world’s finest compressor pedals.

Origin Effects

Demo by  BassTheWorld.com

Review by reddit /basspedals

Review by Gearnews

Review by AMAZONA

Manual download

Cali76 Bass Compressor (Classic)

With the 200 series, BOSS introduces a new generation of pedals that pack advanced sound and versatility into a streamlined size that saves space on your board. Grab-and-go controls and multi-function switches make operation easy and intuitive, while onboard memories allow you to store multiple setups for instant recall. All 200 series pedals feature premium audio quality with 32-bit internal processing and offer support for external control via footswitches, an expression pedal, or MIDI.

The OD-200 Hybrid Drive brings next-level sound, feel, and flexibility to overdrive and distortion, combining decades of BOSS tone expertise with innovative technologies. Powered by hybrid analog/digital circuitry, this dream pedal delivers any drive tone you can imagine via 12 primary modes, 15 boost types, series/parallel gain paths, and more. There’s even an advanced gate on board, ideal for both eliminating noise and adding tightness to high-gain drive tones.

Demo by Rabea Massaad

Demo by EytschPi42

OD-200 Hybrid Drive

Offering a universe of rich, analog-inspired polyphonic tones in a small footprint, the SY-200 makes it simple to weave BOSS’s expressive guitar and bass synth technology into all of your musical journeys. Building on the fun, instant-gratification experience of the acclaimed SY-1, this blue inspiration machine features an expanded sound set, more tone-shaping possibilities, and 128 memories for storing your sonic creations. Two onboard footswitches provide deep real-time performance control, and you can take things even further with external footswitches, an expression pedal, and MIDI.

Demo by  Six-String Samurai

Review by Sound on Sound

Review by musicradar

SY-200 Synthesizer

Featuring an advanced multi-core processor with a huge library of on-board guitar FX, amp, cab and microphone emulations, smart amp/pedal cloning and IR loading, best-in-class looper, and a full suite of vocal FX (including the industry-standard Antares Auto-Tune), the HeadRush® Prime is the most powerful, versatile, and realistic-sounding floorboard FX processor ever. The high resolution and ultra-responsive 7-inch display enables you to touch, swipe, and drag-and-drop to instantly create and edit your rigs in an unprecedentedly easy-to-use way.

HeadRush

Demo by Chilled Guitar Reviews 

Review by Premier Guitar

Review by delamar

Headrush prime

The MXR Bass Envelope Filter delivers classic analog envelope filter sounds in an easy-to-use and compact pedal designed specifically for bass. Separate Dry and Effect controls let you dial in the perfect mix of effected and direct signals, so you can bring the funk without losing the low end. Its wide range of filter tones can be shaped with the Decay and Q controls, and a simple twist of the Sensitivity knob can tailor the pedal for your attack—as well as adjust for passive or active basses. The Bass Envelope Filter's power supply circuitry is designed to withstand over-voltage or polarity mishaps, and its true-bypass switching preserves your tone in bypass mode. It's all packaged in a durable, lightweight, Phase 90-size aluminum housing for the ultimate in portability and pedalboard space-saving dimensions.

Demo by The Bass Chanel

Demo by Bass Whisperer TV

M82 Bass Envelope Filter

Matthew Voss

110E

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 1 V2 ist eine Pass-Through-Box, die speziell für Gitarristen und Bassisten entwickelt wurde. Du kannst das MOD 1 V2 nutzen um mehrere Pedale deines Setups im Front End und im Effekt-Loop des Verstärkers zu postieren (4-Kabel Methode) oder die vier TRS-Anschlüsse als zentralen Zugang und Ausgang des Boards nutzen. Die XLR-Through-Verbindung kann als Signalausgang vom Pedalboard zum Mischpult oder zur PA verwendet werden.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 5 x 6,3 mm TRS thru
- 1 x XLR thru (männlich vorne / weiblich hinten)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 5 x 6,3 mm / ¼" TRS thru
- 1 x XLR thru (male front / female back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR, IEC & Barrel Patchbay

Acoustic/Electric Rig

NSCC

Brian  Nilton

American Sound reproduces the sound of a Fender 57 Deluxe amp, which performs great from clean, driven, and everywhere in between.

JOYO

Demo by The Pedal Picassos

Demo by Roly Platt

Demo by Andrew Clarke 

Demo by intheblues

Demo by Budget pedal Chap 

Review by Neil Bruce, spencerbruce.com

Review by Anthony Sostre, tonealchemists.com

JF-14 American sound

Keeley Electronics

Omni Reverb

PedalSafe Type A1.1

QuickMount Type A

Pedal-Montageplatte für Standard-Einzelpedale

Pedal Mounting Plate For Standard Single Pedals

Schutzabdeckung & RockBoard-Montageplatte für MXR® Standardgröße und Dunlop® Echoplex Delay Pedale

Protective Cover & RockBoard Mounting Plate For MXR® standard size and Dunlop® Echoplex Delay pedals

Schutzabdeckung & universelle Montageplatte für MXR® Standardgröße und Dunlop® Echoplex Delay Pedale

Protective Cover & Universal Mounting Plate For MXR® standard size and Dunlop® Echoplex Delay pedals

Clayton Myers

Das Walrus Audio Monument Harmonic Tap Tremolo V2 ist ein vielseitiges Tremolo-Effektpedal, das sowohl harmonische Tremolo-Effekte als auch traditionelle Amplitudenmodulation erzeugt. Es verfügt über Tap-Tempo mit mehreren rhythmischen Teilungen, mit denen du die Modulationsrate an dein Spiel anpassen kannst, sowie fünf verschiedene Wellenformen von sanften Sinus- bis zu härteren Mustern. Eine seitliche Buchse kann für Expression-Pedal-Steuerung oder externes Tap-Tempo-Signal verwendet werden und das Pedal bietet True-Bypass mit Moment- und Ramp-Funktionen für kreative Performance-Möglichkeiten. Das kompakte Gehäuse mit oben liegenden Buchsen ist pedalboardfreundlich und liefert satte analoge Tremolo-Klänge, inspiriert von Vintage-Verstärker-Schaltungen.

The Walrus Audio Monument Harmonic Tap Tremolo V2 is a versatile tremolo effects pedal that delivers both harmonic tremolo and traditional amplitude modulation. It features tap tempo with multiple rhythmic divisions that let you lock the modulation rate to your playing, and it offers five different waveform shapes from smooth sine to more aggressive patterns. A side jack can be assigned for expression pedal control or external tap tempo input and the design includes true bypass with momentary/ramp functionality for creative performance options. The pedal’s compact enclosure and top-mounted jacks make it board-friendly while delivering rich analog tremolo tones inspired by vintage amp circuits.

Walrus Audio

Review by Guitar.com

Demo by Living Room GD

Monument Harmonic Tap Tremolo V2

QuickMount Type B1

Pedal-Montageplatte für FRIEDMAN, KEELEY Halo, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD, Jupiter V2 und Mooer GL 100 Pedale

Pedal Mounting Plate for FRIEDMAN, KEELEY Halo, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD, Jupiter V2 and Mooer GL 100 pedals

The Slö Multi Texture Reverb allows players to create lush, modulated, sleepy and ambient soundscapes. Stocked with three different algorithms specifically designed to invoke textures for bringing dreams from your subconscious to reality. Want these sounds but need presets? Check out the Slötvå.

Tech Demo by Walrus Audio

SLÖ

PedalSafe Type B1

Schutzabdeckung & RockBoard-Montageplatte für FRIEDMAN, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD & Jupiter V2 Pedale

Protective Cover & RockBoard Mounting Plate For FRIEDMAN, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD & Jupiter V2 pedals

Schutzabdeckung & universelle Montageplatte für FRIEDMAN, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD & Jupiter V2 Pedale

Protective Cover & Universal Mounting Plate For FRIEDMAN, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD & Jupiter V2 pedals

Vincent  Raillard

TC ELECTRONIC ist ein Synonym für einige der bestklingenden Reverbs auf dem Markt - denken Sie an einen Song mit Hall, den Sie in den letzten 20 Jahren gehört haben, und die Wahrscheinlichkeit ist groß, dass er von uns stammt. Wir sprechen hier von Michael Jackson über Dire Straits bis hin zu Lady Gaga und zurück und allem, was dazwischen liegt. Wir haben die ikonischen Hallsounds, die du kennst und liebst, in einem kleinen Paket zusammengefasst, das einfach so wahnsinnig gut klingt, dass du es ausprobieren musst.

The original HALL OF FAME REVERB delivered some of the most-iconic reverb sounds of all time, but HALL OF FAME 2 REVERB extends that legacy of innovation dramatically. Essentially, HALL OF FAME 2 REVERB’s incredible MASH technology adds an expression pedal to a world-class reverb stompbox that not only responds to your touch and saves precious pedalboard space – but blends the celestial world of reverb with the ultimate in personal expression. Add a scintillating new Shimmer effect, and you've got a reverb pedal unlike any other – the awe-inspiring HALL OF FAME 2 REVERB!

The HALL OF FAME 2 REVERB features groundbreaking new technology that brings a wide range of creative expression to the party, controlled solely by how much pressure you apply to the depressed footswitch. Years in the making, and only available in select
TC ELECTRONIC products, this clever innovation elevates the common footswitch well above rather mundane duties, such as “On” and “Off”. More importantly – MASH elevates your performance to the next level.

TC Electronic

Product Video 

Demo by TC Electronic 

Demo by Prymaxe 

Demo by Mike Hermans 

Product Page 

Review by MIXDOWN 

Review by AMAZONA 

Hall of Fame 2

PedalSafe Type G

QuickMount Type G 

Pedal-Montageplatte für Standard TC Electronic Pedale

Pedal Mounting Plate For Standard TC Electronic Pedals

Schutzabdeckung & RockBoard Montageplatte für Standard TC Electronic Pedale

Protective Cover & RockBoard Mounting Plate For Standard TC Electronic Pedals

Schutzabdeckung & universelle Montageplatte für Standard TC Electronic Pedale

Protective Cover & Universal Mounting Plate For Standard TC Electronic Pedals

Dudy Putra Agung

Das GP-5 von Valeton führt die preisgünstige Multi-FX-Reihe in ihre bisher kompakteste Richtung. Dieses schicke kleine Pedal mit nur einem Fußschalter ist als All-in-One-Effektgerät sowie als „Neural Amp Modelling (NAM)“ oder IR-Loader konzipiert. Wählen Sie Ihre eigenen Effekte aus und passen Sie sie an, wählen Sie ein NAM-Preset oder laden Sie Ihre eigenen Impulsantworten, und schließen Sie es an jedes Rig mit einfacher Konnektivität und drahtloser Bearbeitung an. Mehr klangliche Funktionalität kann man sich von einem Pedal von der Größe eines Schokoriegels nicht wünschen!

Valeton’s GP-5 takes their affordable multi-FX line-up in their most compact direction yet. This nifty little single-footswitch pedal is designed as an all-in-one FX unit, as well as a ‘Neural Amp Modelling (NAM)’ or IR loader. Select & customize your own effects, choose a NAM preset or load in your own impulse responses, and hook it up to any rig with simple connectivity & wireless editing. You couldn’t ask for more tonal functionality out of a pedal the size of a chocolate bar!

Valeton

Official Website

Review by Stompbox Steals

Review by The Gear Forum

Demo by  Andertons Music Co

GP-5

Für 5-10 FX-Pedale, 1 MOD-Slot - **442 x 236 mm / 17.40" x 9.29"** - erhältlich mit Gig Bag oder Flight Case

For 5 - 10 FX pedals, 1 MOD slot - **442 x 236 mm / 17.40" x 9.29"** - available with Gig Bag or Flight Case

AntiPasti Naturale

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 3 V2 ist eine Patchbay für Sänger und Akustik-Musiker. Über die zwei XLR-Ausgänge kannst du ein Stereo-Signal von dein MOD senden und an den XLR-Eingang lässt sich ein Mikrofon anschließen. Mit drei TRS-Through-Verbindungen lässt sich das MOD 3 V2 außerdem als zentraler Zugang und Ausgang des Boards nutzen um zum Beispiel Effektpedale in den FX-Loop eines Verstärkers einzuschleifen.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 3 x 6,3 mm TRS thru
- 2 x XLR thru (männlich vorne / weiblich hinten)
- 1 x XLR thru (weiblich vorne / männlich hinten)
- 1 x DC 2,1 x 5,5 mm Hohlstecker thru
- 1 x AC IEC thru (männlich vorne / weiblich hinten)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel


The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 3 V2 is a pass-thru box designed for use by vocalists and acoustic players. The 2x XLR outputs allow you to send a stereo signal from your MOD and the 1x XLR input can be used to connect your microphone. You can also use it to run several pedals from your board through the effects loop of your amp, or simply use the MOD as a central access point to your pedalboard.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 3 x 6,3 mm / ¼" TRS thru
- 2 x XLR thru (male front / female back)
- 1 x XLR thru (female front / male back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR Patchbay for Vocalists & Acoustic Players

NoAmp Record Stereo Board 3

Monitor

Mono noFX

FX right

FX left

Der One Control Gecko MKIII ist eine kompakte und leichte Lösung um schnell die MIDI-Programme an mehreren Geräten umzuschalten. Viele Effektpedale nutzen eine MIDI-Steuerung und die Möglichkeit schnell und direkt auf verschiedene Presets zugreifen zu können ist inzwischen eine der wichtigsten Anforderungen bei vielen Live-Shows. Der Gecko MKIII bietet Musikern drei wählbare Schalt-Modi (Select, Instant, Direct) für insgesamt 20 Presets. Jedes Preset kann ein Program Change (PC) Signal in jedem der 16 MIDI-Kanäle speichern. Außerdem lässt sich in jedem MIDI-Kanal das Control Change (CC) Signal festlegen, das gesendet wird, wenn man den OK/TAP Fußschalter tritt. Da man das CC Signal für jeden Kanal frei bestimmen kann, lässt sich so das Tap Tempo von bis zu 16 Geräten gleichzeitig kontrollieren.

The One Control Gecko MKIII is a compact, lightweight solution for quickly switching between programs on MIDI devices. With an increasing number of guitar pedals being built with MIDI capabilities, having the ability to access presets in a quick and efficient manner has become an important part of playing live. The Gecko MKIII gives guitarists three modes to access programs (Select, Instant, Direct) and features 20 presets. Each preset can store one PC (program change) message for each of 16 MIDI channels. Also, for each MIDI channel, you can set the CC number to send when pressing the OK/TAP footswitch and use it as tap tempo control. Since you can set individual CC numbers for each channel, you can control tap tempo of up to 16 devices at once.

One Control

Official Product Page

One Control Gecko MKIII - One Control MIDI Controllers - Review Video - JayLeonardJ

Review by Sweetwater Customers

Gecko MkIII

ch ray

Ein super vielseitiger Vorverstärker mit 3 Modi (Clean, Comp und Hot), einem parallelen Signalmix mit Tiefpassfilteroptionen zur Verbesserung des Bassgefühls

Der Bass Master ist das Vorgängermodell unserer hochgeschätzten Bass Station und bietet verbesserte Vielseitigkeit sowie einen praktischeren und geradlinigeren Ansatz.
Ein super vielseitiger Vorverstärker mit 3 Modi (Clean, Comp und Hot), einem parallelen Signalmix mit Tiefpassfilteroptionen zur Verbesserung des Bassgefühls und der Bassreaktion sowie einem 4-Band-Equalizer machen ihn zu einem extrem vielseitigen und leistungsfähigen Tool, das Töne erzeugt, von denen andere Bassvorverstärker nur träumen können.

A super versatile preamp with 3 modes (Clean, Comp,
and Hot), a parallel signal mix with low pass filter
options for improving the low end feel 

The Bass Master precedes our revered Bass Station,
packing improved versatility, and a more practical and
straight forward approach.
A super versatile preamp with 3 modes (Clean, Comp,
and Hot), a parallel signal mix with low pass filter
options for improving the low end feel and response,
and a 4-band equalizer makes it an extremely versatile
and capable tool, getting tones other bass preamps
would dream of.

DSM & Humboldt

Simplifier Bass Master

Travis Dom

The Decimator guitar pedal offers a new approach to noise reduction processing. Most noise suppression systems suffer from one major problem inherent in their design: The system cannot be immediately responsive to very short-term staccato notes. The typical downward expander sound reduction system suffers from a dead zone in the release response characteristic that causes a compromise in tracking both fast decaying notes and long sustained notes. The Decimator pedal's design offers a novel approach to tracking the envelope of the input signal called Time Vector Processing.

Due to this novel approach in controlling the expander, the Decimator system will instantly respond to short staccato notes and, at the same time, will provide a very slow ripple free control of long sustained notes. The Decimator noise suppression system is very transparent delivering high performance.

ISP Technologies

Review by sevenstring.org

Review by 300Guitars

Demo by EnsiGear

Demo by Reverb

Decimator

Horst Balle

An ABY pedal typically receives the signal from a guitar or other instrument and splits it into two outputs. The StereoMaker is fully buffered and packed with features like: soft touch JFET switching, transformer isolated outputs, pseudo stereo effects, 180 degrees phase reverse and ground lift.

In STEREO mode the width and volume controls are enabled to optimize a pseudo stereo sound. The PAD switch makes it possible to attenuate line level signal to instrument level. Also the StereoMaker can be used as a direct box to convert unbalanced to balanced signals becoming a usefultool for keyboard players and recording studios.

Surfy Industries

Demo by Budda Guedes

Stereomaker ABY Switch

Tri Parallel Mixer von Electro-Harmonix