Der OctaSwitch MKII ist ein 8-fach Looper/Switcher, bei die Effektpedale in die acht Effekt-Loops auf der Rückseite dieser Einheit (alle mit True-Bypass, widerstandsfrei und mit Gold-Relais, damit alle Pedale, sowohl neue als auch alte, verwendet werden können). Durch An- und Ausstellen der nummerierten Schalter in jeder der acht DIP Bank Switches stellt man ein, welche Effekte man simultan je Bank nutzen möchte. Eine blaue LED für jeden Effekt-Loop und jede Bank. Der Octa-Switch II verfügt jedoch noch über eine Reihe weiterer Features! Der neunte Fußschalter auf der Linken Seite ist ein Bypass-Switch, der es erlaubt alle acht Pedale komplett aus der Signalkette zu nehmen und den unbeeinflussten Klang direkt an den Verstärker zu senden. Es gibt außerdem zwei externe Schaltbuchsen, welche die Verwendung von zwei Verstärkern erlauben und/oder das Umschalten der Kanäle auf diesen Amps. Der OctaSwitch bietet einen Mono Eingang (bei Bedarf gebuffert) und einen Stereo Ausgang.

The OctaSwitch MKII is an 8-loop switcher/looper that allows you to connect effect pedals to its eight effect loops on the back of the unit. All loops feature true bypass, are resistance-free, and use gold-plated relays, making them compatible with both modern and vintage pedals. By toggling the numbered switches in each of the eight DIP bank switches, you can determine which effects are activated simultaneously in each bank. A blue LED indicates the status of each effect loop and bank.

However, the OctaSwitch II offers even more features! The ninth footswitch on the left side is a bypass switch that allows you to completely remove all eight pedals from the signal chain, sending the unprocessed signal directly to the amplifier. Additionally, there are two external switching jacks that enable the use of two amplifiers and/or channel switching on these amps. The OctaSwitch provides a mono input (which can be buffered if needed) and a stereo output.

Review by Marshall Forum

Demo by Brett Kingman

Review by Zzounds

Review by Rig Talk

Manual

Octa-Switch MK2

Ok, so you have eight effects pedals which you use regularly. You use various combinations of these pedals in various songs, but you are not good at tap dancing…or you are just clumsy and have (once or twice) stepped on the ultra tricked out-metalized-distortion pedal for the lead in your one ABBA cover. You have seen the digital effects controllers they use on the big stages, and have secretly yearned for one… even though you may never make the big stage. Enter Thomas Guldmann’s Octa-switch MK3. Your eight effects plug into the eight effects-loops on the back of this unit (all true-bypass, impedance free, gold relays so you can run any of your pedals, new and old without problem), and then by turning on or off the numbered switches in each of eight DIP Bank switches, you determine which effects you wish to use simultaneously in each Bank. There is a blue LED for every effects loop used and for each Bank (so once you are programmed, when you step on Bank 6 you will see the lights of all the effects you have assigned to Bank 6 and the Bank 6 LED). The Octa-switch MK3 has incorporated a couple new features as well! The ninth switch on the left side of the case is a BYPASS Switch….this allows you to completely bypass all eight pedals and enjoy only the unaffected sound of your amplifier. There are also two External Switching jacks which allow you to use two amplifiers and/or switch channels on those amps. Once you have all the Banks programmed, we recommend placing a piece of scotch or electrical tape over each DIP (….just to protect the switch from accidental switching, damage or floods….like beer). There is a buffered (or not….switchable) Mono input and a stereo Output, and the unit is powered by dual 9v batteries, or by a regulated power supply…like the PowerJack or the Pro Power (both by Carl Martin).

Product Page

Demo by ukguitarnoodle

Octa-Siwtch

Nun, braucht die Welt wirklich ein weiteres Chorus-Pedal? Hmmm gutes Argument, oder? Braucht es das wirklich? Nun, ja, wenn es etwas zu bieten hat. Was also bringt der neue Carl Martin Atlantic Chorus auf den Tisch, abgesehen von der hervorragenden Optik mit seinem neuen zweifarbigen Druckgussgehäuse in Ocean Blue eloxiertem Finish, dem kleinen, pedalboardfreundlichen Fußabdruck, der Anschlussbuchse auf der Oberseite und dem erstklassigen Sound (ohne Grund)? Nun, es gibt ein paar Tricks; höchst ungewöhnlich für ein Chorus-Pedal, hat der Atlantic Chorus einen Pegelregler, der das Signal tatsächlich ein wenig anheben kann, um genau im Mix zu sitzen. Aber der eigentliche Clou ist der RATE-Regler, der das Vibrato für extreme Chorus-Modulationen hinzufügt.

Well, does the world really need another Chorus pedal? Hmmm good argument, does it? Does it really? Well yeah, if it has something to bring to the table. So what does the new Carl Martin Atlantic Chorus bring to the table apart from the stellar looks with its new two-toned die-cast enclosure in Ocean Blue anodized finish, small pedal board friendly footprint, connector jack on the top, and top-notch sound (off cause)? Well, there are a few tricks; highly unusual for a chorus pedal, the Atlantic Chorus has a level control, which actually can boost the signal quite a bit to sit right in the mix. But the real game changer is in the RATE control knob which blends in vibrato for some more extreme in-depth chorus modulations.

Official Product Video

Demo by  EytschPi42

Demo by  Martin Klaja's Guitarchannel

Demo by  Alberto Barrero

Review by Amazona

Review by Stoakes Media

Review by Gitarre&Bass

Review by Bonedo

Atlantic Chorus

Der Carl Martin Tuner vereint Einfachheit, Effizienz und Stil. Er ist in einem klassischen schwarzen Druckgussgehäuse untergebracht und bietet sowohl eine Standard- als auch eine Strobe-Anzeige, die beide hell genug sind, um im Stehen abgelesen zu werden. Die Kalibrierung reicht von 437 bis 443 Hz, wobei A440 die Standardeinstellung ist.

Zur Ausstattung gehören ein Mute-Schalter für geräuschlose Abstimmung und True Bypass für einen sauberen Signalweg. Mit einer 9V-Batterie oder einem externen Netzteil betrieben, ist es eine perfekte Ergänzung für Ihr Pedalboard.

The Carl Martin Tuner combines simplicity, efficiency, and style. Housed in a classic black die-cast casing, it offers both standard and strobe readouts, both bright enough to read while standing. Calibration ranges from 437 to 443 Hz, with A440 as the default.

Features include a mute switch for silent tuning and True Bypass for a clean signal path. Powered by a 9V battery or external supply, it's a perfect addition to your pedalboard.

Demo by Guitarworks1000

Demo by  Music Force Official

Review by acoustic guitar forum

Tuner

The CARL MARTIN Noise Terminator is a 9V-battery-powered pedal designed to preserve the original tonal characteristics while removing unwanted noise that occurs when multiple effects are used. 
The CARL MARTIN Noise Terminator surpasses the performance of conventional noise gates by allowing the player to switch between two threshold settings: Soft - with less noisy equipment: Hard - when more radical settings are required. 
The remote jack allows you to connect the Noise Terminator to an external midi switching system, which allows the player to go between the soft and hard settings with ease.

RockBoard Artists

Aktivitäten Übersicht

News

Noise Terminator

Media

Videos

Handbücher

Links

Technische Daten

Weitere Pedals von Carl Martin

Carl Martin

Octa-Switch MK2

Carl Martin

Octa-Siwtch

Carl Martin

Atlantic Chorus

Carl Martin

Tuner

Produkte

Bau dein Board

Services

Community