NIck Costa

A smaller option to my large pedal board. 
Omits a few non-essential pedals: Harmonist, Tap. 
WAH is offboard.
Polytune switched to Polytune mini.

 can be toggle between wet/dry/wet, stereo, or mono using an ABY switch installed under the board. 

The loop switcher controls 2nd row pedals: POG. AC, TS9, OCD, 1981, and the Strymon pedals using MIDI.

PATCHBAY MOD 1: 
1) Guitar Input
2) Amplifier out.
3) Wet Fx out left  
4) Wet Fx out right (or use for stereo out)
5) expression pedal input TRS 

Recording: Outputs 3 & 4 (Wet L and Wet R) into PC. Output 2 (amp) into miked amp or amp sim, into PC.

LIve: 3&4 direct to mixer for full wet/dry/wet, or set to stereo for two amps or mono for one amp (mono sum switch on Iridium). 

Pedal board also has a LED strip installed underneath (cool blue) and a Rockboard LED light on the left. 

Powered by a Zuma with 2 Ojai RC 30s (19 outputs used). 12v output used for LED strip, 18V output used for OCD.

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 1 V2 ist eine Pass-Through-Box, die speziell für Gitarristen und Bassisten entwickelt wurde. Du kannst das MOD 1 V2 nutzen um mehrere Pedale deines Setups im Front End und im Effekt-Loop des Verstärkers zu postieren (4-Kabel Methode) oder die vier TRS-Anschlüsse als zentralen Zugang und Ausgang des Boards nutzen. Die XLR-Through-Verbindung kann als Signalausgang vom Pedalboard zum Mischpult oder zur PA verwendet werden.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 5 x 6,3 mm TRS thru
- 1 x XLR thru (männlich vorne / weiblich hinten)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 5 x 6,3 mm / ¼" TRS thru
- 1 x XLR thru (male front / female back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR, IEC & Barrel Patchbay

Nick Costa & The Stray Crows - Medium Board

Tester

Was haben die Sounds berühmter Gitarristen wie Page, EVH und Johnson gemeinsam? Sie alle nutzten die legendäre Echo-Maschine EP-3 als Vorverstärker. Wir haben diese Magie in einem neuen Xotic Effects-Pedal eingefangen: dem EP Booster. Wir haben die hochwertigsten verfügbaren Bauteile verwendet. Mit einem diskreten FET-Design und einem Ausgang mit niedriger Impedanz liefert der EP Booster bis zu +20 dB unverfälschten Boost mit multidimensionalen, schimmernden Höhen und Tiefen, ohne das Gehör zu ermüden. Über die internen DIP-Schalter können Sie die Boost-Frequenzen und EQ-Einstellungen wählen. Ein einfacher, reiner Boost, der dem magischen EP-3 Tribut zollt und die gefeierten Sounds der berühmtesten Spieler der Welt einfängt. Der EP-Booster – großartiger Sound beginnt hier!

What do the tones of renowned guitarist such as Page, EVH and Johnson have in common? They all used the legendary echo machine EP-3 as a pre-amp. We've captured that magic in a new Xotic Effects pedal, the EP Booster. We've used the highest quality parts available with a discrete FET design and low impedance output, the EP Booster provides up to +20dB of unadulterated boost with multi-dimensional, shimmering highs and lows, and no ear fatigue. The internal DIP switches let you choose the boost frequencies, and EQ settings. A simple pure boost that pays reverence to the magical EP-3 and captures the celebrated tones of the world's most famous players. The EP-Booster,great tone starts here!

Xotic

Product Page

Demo by Mike Hermans

Official Product Video

EP Booster

Isen Ritchie

The Y-Not MIDI enabled A/B/Y switch is designed to be an all-in-one solution for switching one audio signal to two outputs.

Use the Y-Not to switch between two amps (for example, a clean amp and a dirty amp), or use it to switch between the inputs of a two input amp. The Y-Not is able to do this cleanly and transparently, without any of the problems associated with traditional A/B boxes.

The new Y-Not version 2.0 includes some very useful new features. One is programmable phase inversion on the B output. This allows you to run two channel switching amps simultaneously and adjust the phase on the fly so that every combination of channels is in phase. This was previously only available as a mod, but is now a standard feature.

Also new for version 2.0 is a “TRS In” switch that, when engaged, allows you to use a piezo-equipped guitar or other 1/4-inch TRS audio source. The tip of the TRS jack will be sent to the A output, and the ring of the TRS jack will be sent to the B output. This allows you to have automated switching between magnetic and piezo signals from your guitar, sending each signal to its own amp.

RJM Music Technology

Manual

Y-Not

David Litaba

The Volume (X) Pedal controls volume and FX parameters, featuring fully adjustable rocker tension and and a Low Friction Band-Drive for ultimate durability—all in a pedalboard-friendly housing.

Dunlop

Demo by W-Distribution

Review by Jim Dunlop 

Review by VAR GUITAR

Review by musicradar

VOLUME (X) PEDAL DVP3

QuickMount Type M

Pedal-Montageplatte für Dunlop Cry Baby Wah-Pedale

Pedal Mounting Plates For Dunlop Cry Baby Wah Pedals

ch ray

 Introduced by VOX in 1967, the Wah-Wah pedal stemmed from the Midrange Boost feature of a VOX amp design and was initially marketed as a way to emulate Clyde McCoy’s trumpet mute technique. However, an unintended but music-changing use with electric guitar turned the Wah pedal into a vital tool for renowned artists such as Jimi Hendrix and Eric Clapton, driving the creation of now-legendary performances and songs. From the 1960s to today, the Wah pedal has become an essential tool for guitarists.

The new Real McCoy wah pedal perfectly emulates the original wah down to the component level. VOX engineers have worked hard to unravel the mysteries of the vintage McCoy wah model, resulting in a pedal that meticulously replicates the exact tonal characteristics.

The Real McCoy is voiced for the iconic nasal tone of the original wah model, with an accentuated midrange that imparts a warm and melodic character to your guitar.

Demo by BUZZBEE TV

Demo by kisugita_DIY

Real McCoy Wah VXVRM1

Carrying on the POLYTUNE legacy, POLYTUNE 3 MINI packs an unprecedented amount of tuning power into a tiny footprint without sacrificing essential features, such as always-on mode and our audiophile BONAFIDE BUFFER circuit for uncompromised tones – making it ideal for fully-loaded pedal boards where every inch counts!

TC Electronic

Review by AMAZONA 

Review by GUITAR World 

Review by bonedo 

Demo by TC Electronic 

Demo by Guitar World 

Polytune 3 Mini

QuickMount Type L

Pedal-Montageplatte für Standard-Mini-Pedale

Pedal Mounting Plate For Standard Mini Pedals

thuy nguyen

A uniquely designed steel enclosure made with quality components throughout. My goal was to spare no expense. I realize that sometimes in the world of guitar gear, there isn’t always one answer in choosing the best components and designs, so I just picked my favorites. This includes Switchcraft 11 open frame jacks, and a super quiet soft touch switching system via an internal relay.

I have been working on this project for the better part of three years, as a collaboration and with engineering by Jon Ashley of Bondi Effects. I feel that the pedal is unique in design and sonically unlike anything I have ever heard, especially in the lower gain and boost settings. There is a subtlety that feels more like a vintage pedal than a modification of a classic. There are two circuits present in the pedal, one distortion and one preamp boost, running at 18v via an internal voltage regulator. I made this pedal with the idea to create a distinction for my own sound, and what I found is that it is an extremely useful tool for capturing a lot of different types of sounds. I am most proud of the lower gain side, as I feel it is the most unique section of the pedal, but I must also include that the gain section is extremely sweet sounding throughout, especially for heavy and complex chords. There is a midrange punch that I love and a warmth and thickness that reminds me a bit of a ribbon mic. When the development of this pedal turned into something new and unique, it became the catalyst to starting 1981 Inventions, so I decided to make this the first official release.

1981 Inventions

DRV - White

Kick your playing into high gear with SPARK MINI BOOSTER, a stompbox-wonder for the initiated that features a completely clean boost with some serious tone enhancement under the hood once you really start cranking things.

With a full 20 dB of boost, SPARK MINI BOOSTER is a great clean booster. But that’s not all it does – keep turning that knob and it’ll start working its magic driving gear into peak performance! No matter what your style or set-up, this musical miracle will maximize your potential – but let your core tone shine through completely unaltered.

PrimeTime is a radical new feature that is exciting guitarists around the globe. Put simply, SPARK MINI BOOSTER instantly understands whether you want the pedal to be on permanently when you hit the footswitch, or just when you hold the footswitch down. Which totally rocks for both ‘always-on’ and ‘emphasizing passages’ situations.

By adding a discrete, fully analog circuit, SPARK MINI BOOSTER adds a purely magical sense of life and excitement to your gear and tone. Each part of the circuit is carefully selected, from transistor to capacitor and from resistor to diode. What does that mean? Sweet, pure tone in all of its glory in an unparalleled clarity with zero coloration. Whether you want to make things sing or roar, this circuit ensures to maximize your tone.

Review by bonedo

Review by Daniel Rettberg

Demo by Reverb

Spark Mini Booster

QuickMount Type UV

Universal-Pedal-Montageplatte für vertikale Pedale

Universal Pedal Mounting Plate For Vertical Pedals

Franko Teston

Der DPC-5 ist ein kompakter MIDI-Controller und Loop-Switcher. Er wurde entwickelt, um eine Mischung aus MIDI- und Nicht-MIDI-Pedalen in Ihrem Rig zu steuern und ermöglicht Ihnen die Erstellung von Presets, die Sie bei Bedarf sofort aktivieren können. Mit einem einzigen Tap auf dem DPC-5 können Sie bis zu fünf Nicht-MIDI-Pedale ein- oder ausschalten, das Tap-Tempo an ein Delay oder ein anderes Gerät senden, den Kanal Ihres Verstärkers ändern und Programme auf bis zu vier MIDI-Geräten umschalten. Das ist eine Menge Leistung auf kleinstem Raum!

The DPC-5 is a compact MIDI controller and loop switcher. It’s designed to control a mix of MIDI and non-MIDI pedals in your rig, allowing you to craft presets that you can engage instantly when you need them. A single tap on your DPC-5 can turn up to five non-MIDI pedals on or off, send tap tempo to a delay or other device, change the channel on your amplifier, and switch programs on up to four MIDI devices. That’s a lot of power in a small footprint!

Disaster Area Designs

Review by reddit /guitarpedals

Review by The Gear Page

Demo by Jmp Music Studio

Demo by Hype Consumer

DPC-5 Gen 3

ome might say we’re driven. When our engineers lock themselves in our sound design labs for months on end, you might say we’re obsessed. We have been dedicating ourselves to forging a collection of the most organic, luscious, expressive, and versatile modulation effects ever heard.

It was an enormous mission—we painstakingly studied the nuances of the legendary modulations of celebrated tremolo effects, phaser pedals, chorus units, and more from the last five decades. We didn’t stop at faithfully capturing these warm and lush vintage sounds—we expanded their vocabulary with extended versatility and sonic possibilities never before heard.

Strymon

Review by permierguitar

Quick Start Guide 

Demo by stymon

Mobius

QuickMount Type J1

Pedal-Montageplatte für BOSS DD-500, MD-500, RC-500 & RV-500 / STRYMON BigSky, Mobius & TimeLine Pedale

Pedal Mounting Plate for BOSS DD-500, MD-500, RC-500 & RV-500 / STRYMON BigSky, Mobius & TimeLine pedals

Der legendäre und klassische Original-POG wurde von allen großen Magazinen auf allen Kontinenten für sein makelloses polyphones Tracking und seine musikalische Flexibilität ausgezeichnet. Der EHX Micro POG bietet das gleiche perfekte Tracking und glatte Polyphonie in einem vereinfachten Design. Der Micro POG ist jetzt in einem kleinen Pedalboard-freundlichen Druckguss-Gehäuse untergebracht und wird Sie schon bei der ersten Benutzung umhauen.

Mit dem MICRO POG können Sie Ihr ursprüngliches „trockenes Signal“ mit zwei verschiedenen Oktaven (eine oberhalb und eine unterhalb Ihrer ursprünglichen Note) mischen, um völlig neue, inspirierende Sounds zu erzeugen.

The Legenday and classic original POG won top awards from every major magazine on every continent for its flawless polyphonic tracking and musical flexibility. The EHX Micro POG delivers the same perfect tracking and smooth polyphony in a simplified design. Now in a small pedalboard-friendly diecast chassis, the Micro POG delivers and will blow you away the first time you use it.

With the MICRO POG, you can mix together your original “dry signal” with two different octaves (one above and one below your original note) to create totally new inspiring tones.

Electro-Harmonix

Review by Talk Bass.com

Demo by Nikita Astrakhantsev

Demo by Eric Merrow

Micro POG

PedalSafe Type C

QuickMount Type C

Pedalmontageplatte für große vertikale Pedale

Pedal Mounting Plate For Large Vertical Pedals

Schutzabdeckung & RockBoard-Montageplatte für große vertikale Pedale

Protective Cover & RockBoard Mounting Plate For Large Vertical Pedals

Schutzabdeckung & universelle Montageplatte für große vertikale Pedale

Protective Cover & Universal Mounting Plate For Large Vertical Pedals

Nothing reveals the true nature of your guitar and your playing like a world-class tube amp driving a perfectly matched speaker cabinet in a great sounding room. Now there is a pedal that truly delivers that sound and feel, with simple controls for effortlessly dialing in the perfect amp tone when going direct.

Discover inspiring tube amp responsiveness, unprecedented impulse response speaker cabinet realism, and controllable natural sounding room ambience.

Review by GuitarWorld

Demo by Guitar Bonedo

Iridium

QuickMount Type J

Pedal-Montageplatte für mittelgroße Strymon-Pedale

Pedal Mounting Plate For Medium Size Strymon Pedals

Simon Lo

Plug into BigSky and instantly lift your sound into the stratosphere. The world below you fades into the distance, and you’re elevated into a glow of lush, glorious, radiant reverbs.

To create a reverb experience as natural, beautiful, and immersive as BigSky required tremendous feats of sound engineering and artistic imagination. Using the fundamentals of acoustical science as our beacon, we carefully studied and scientifically analyzed reverb technology from the past fifty years. We faithfully captured the essence of these classic sounds, and forged ahead to dream up our vision of reverbs from the future.

Review by Jan Steiger, amazona.de

Review by Best Guitar Effects 

Big Sky

Keeley Kompressoren sind wohl die beliebtesten Boutique Kompressoren am Markt. Mit weit über 50.000 gebauten Kompressoren ist die Keeley Werkstatt wohl ein Experte auf den Gebieten Kompression, Limiting und Sustain. Keeley weiß ganz genau was es braucht um ein Instrument klingen zu lassen, als wäre es professionell aufgenommen worden. Sie wissen wie sie deine Gitarre im Mix ganz nach vorn stellen und sie wissen genau, was das Spielen zur wahren Freude macht. Keeley Compression macht’s möglich! Der Keeley Compressor Plus ist der nächste Schritt nach vorne in Keeleys Reihe an 2- und 4- Knob Kompressoren. Die neuen Features sind einfach und geradeaus. Es gibt einen einfachen Release Schalter, der speziell auf Single Coils und Humbucker getunt ist. Kein rätseln mehr, ob Attack und Release richtig eingestellt sind. Deine Humbucker haben all das Attack und den Punch den sie haben sollen! Das Keeley Team hat außerdem einen fantastisch klingenden Tone Regler kreiert, der die sensiblen Obertöne, die bei komprimierten Signalen oft verloren gehen, betont. Außerdem verfügt der Compressor Plus über einen Blend Regler, der das Kompressor Signal auf bis zu 50 % im Mix absenken, und so die Dynamikspitzen in deinem Spiel und somit deine Phrasierung erhalten kann, während du zudem das nötige Sustain bekommst. Der Keeley Compressor Plus bietet denselben fabelhaften Push an süßen Frequenzen, den du von älteren Kompressoren kennst, nun mit der nötigen Flexibilität für jedes Instrument.

The Keeley Compressor is the most popular boutique compressor in the world.  With well over 50,000 compressors built in the Keeley shop we have an expert understanding of compression, limiting, and sustain.  Keeley know what it takes to make an instrument sound like it’s been professionally recorded.  They know how to make your guitar jump from the mix. They know how to make it fun and easy to play.  Keeley Compression is how.  The Keeley Compressor Plus is the next true advancement in their 2 and 4 knob compressor line.  The new features are simple and straight forward.  Now there is a simple Release Switch that is tuned for single coils or humbuckers.  No more wondering if you have the attack or release set right.  Your humbuckers will have all the attack and punch that they should.  The Keeley team designed a gorgeous sounding Tone Control that emphasizes the most sensitive harmonics that can be lost in compression.  The Compressor Plus now sports a Blend Control that retains the peaks in your playing and more importantly the proper phasing of your guitar signal.  The Keeley Compressor Plus offers the same gorgeous push of frequencies and sweetening of tone that the old comps gave you, now with the flexibility to handle any instrument.

Keeley Electronics

Keeley Compressor Plus - Demo Video - Livingroom Gear Demos

Keeley Compressor Plus - Demo Video - ProGuitarShop Demos

Compressor Plus

PedalSafe Type A1.1

QuickMount Type A

Pedal-Montageplatte für Standard-Einzelpedale

Pedal Mounting Plate For Standard Single Pedals

Schutzabdeckung & RockBoard-Montageplatte für MXR® Standardgröße und Dunlop® Echoplex Delay Pedale

Protective Cover & RockBoard Mounting Plate For MXR® standard size and Dunlop® Echoplex Delay pedals

Schutzabdeckung & universelle Montageplatte für MXR® Standardgröße und Dunlop® Echoplex Delay Pedale

Protective Cover & Universal Mounting Plate For MXR® standard size and Dunlop® Echoplex Delay pedals

Der TS9 Tube Screamer Reissue belebt das legendäre Overdrive‑Pedal der 1980er neu, das zahllose Gitarrentöne prägte.
Sein charakteristischer Mitten‑Boost und das warme Clipping verleihen sanften Biss, ohne die Klarheit jeder Note zu opfern.
Drei einfache Regler—Drive, Tone und Level—formen den Sound von dezentem Boost bis zu sattem Overdrive.
Buffered Bypass sichert Ihr Signal auf dem Pedalboard, ob aktiv oder ausgeschaltet.
Kompakt und robust in seinem typisch grünen Gehäuse ist es sowohl bei Profis als auch Hobbyisten unverzichtbar.
Ob SRV‑Sparkle oder moderner Crunch—der TS9 liefert den unverwechselbaren Klassiker‑Sound.

The TS9 Tube Screamer reissue faithfully revives the classic 1980s overdrive that defined countless guitar tones.
Its signature mid‑hump and warm clipping add smooth grit while preserving note clarity and amp feel.
Three simple knobs—Drive, Tone, and Level—let you shape everything from a gentle boost to full‑bodied overdrive.
Buffered bypass ensures your signal stays strong on‑ or off‑board, with true pedalboard reliability.
Compact and rugged, its familiar green enclosure has been a staple on pros’ and hobbyists’ rigs alike.
Whether you’re chasing SRV sparkle or modern crunch, the TS9 delivers instantly recognizable tone.

Ibanez

Review by Reddit /guitarpedals

Demo by intheblues

TS9 Tube Screamer

QuickMount Type F

Pedal-Montageplatte für Standard Ibanez TS / Maxon Pedale

Pedal Mounting Plate For Standard Ibanez TS / Maxon Pedals

The OCD was the first pedal to use Mosfets as clipping devices. Another first was their configuration as "hard clippers connected to v-ref" instead of to ground, as was the norm. These things contribute greatly as to why the OCD has such touch-sensitivity...why they react so well when the strings are hit hard or soft, and why they sound & feel different than all other pedals out there, 90% of which are just slight tweaks of the Tube Screamer. 

Fulltone

Demo by That Pedal Show

The Story of Fulltone OCD

PedalSafe Type FT1

QuickMount Type FT1

Pedal-Montageplatte für FULLTONE OCD & 69 MK2 Pedale

Pedal Mounting Plate for FULLTONE OCD & 69 MK2 pedals

Schutzabdeckung & RockBoard-Montageplatte für FULLTONE OCD & 69 MK2 Pedale

Protective Cover & RockBoard Mounting Plate For FULLTONE OCD & 69 MK2 pedals

Schutzabdeckung & universelle Montageplatte für FULLTONE OCD & 69 MK2 Pedale

Protective Cover & Universal Mounting Plate For FULLTONE OCD & 69 MK2 pedals

A warm silky boost with just the right amount of bite.
True bypass for eliminating any signal interference when switched off. Can be used with AC adaptor (optional) or 9V Battery.

Review by Squid Guitar Inc.

Review by guitartest.de

Demo by Living Room GD

Demo by Prymaxe

AC Booster

Als wir uns entschieden, ein Stereo-Delay-Effektpedal in Studioqualität zu entwickeln, wussten wir, dass wir weit über das bisher Erreichte hinausgehen mussten – in Sachen Klangqualität, klanglicher Flexibilität, Hardware-Design und Verarbeitungsleistung. Wir verbrachten Monate in den Sounddesign-Laboren von Strymon und träumten von den geräumigsten, üppigsten, kreativsten und anpassbarsten Delay-Effekten, die man je gehört hat. Es war eine monumentale Aufgabe – ein unermüdliches Studium von Delays und ihren Nuancen und ein kontinuierliches Streben nach innovativen und musikalisch inspirierenden Klängen. Durch die Verwendung eines unglaublich leistungsstarken SHARC DSP wird jedes bisschen Verarbeitungsleistung genutzt.

TimeLine bietet Ihnen zwölf einzigartige Delay-Maschinen, jede mit umfassender Kontrolle über Klangcharakter und -gefühl. Gehen Sie von knackigen und klaren digitalen Delays in Studioqualität bis hin zu den gesättigten und schwankenden Klängen von Band-Delay-Maschinen. Erhalten Sie warme und unscharfe Wiederholungen im analogen Stil bis hin zu schimmernden, funkelnden und kristallinen Eis-Delays.

Optimieren Sie nach Herzenslust und speichern Sie bis zu 200 Voreinstellungen Ihrer Lieblingssounds. Krönen Sie das Ganze mit einer vollständigen MIDI-Implementierung und einem routingfähigen 30-Sekunden-Stereo-Looper und schon sind Sie auf dem Weg zum Delay-Glück.

When we decided to create a studio-class stereo delay effects pedal, we knew we must go well beyond what has been done in the past—in sound quality, sonic flexibility, hardware design, and processing power. We spent months locked up in the Strymon sound design labs dreaming up the most spacious, lush, creative, and tweakable delay effects ever heard. It was a monumental task—a relentless study of delays and their nuances, and a continuous pursuit of innovative and musically inspirational sounds. Utilizing a ridiculously powerful SHARC DSP, every drop of processing power is harnessed.

TimeLine provides you with twelve unique delay machines, each with extensive control over sonic character and feel. Go from crisp and clear, studio-quality digital delays all the way to the saturated and fluctuating sounds of tape delay machines. Get warm and fuzzy analog style repeats all the way to shimmery, sparkling, and crystalline ice delays.

Tweak to your hearts content and save up to 200 presets of your favorite sounds. Top it all off with full MIDI implementation and a routable, 30-second stereo looper and you’re on your way to delay bliss.

Demo by shnobel

Demo by Mike Hermans 

Review by delicious audio

Review by Amazona 

Timeline

Ojai r30

Zuma

Für 9-15 FX-Pedale, 1 MOD-Slot - **622 x 330 mm / 24.49" x 12.99"** - erhältlich mit Gig Bag oder Flight Case

For 9 - 15 FX pedals, 1 MOD slot - **622 x 330 mm / 24.49" x 12.99"** - available with Gig Bag or Flight Case

This pedal board can be toggle between wet/dry/wet, stereo, or mono using an ABY switch installed under the board. 

The loop switcher controls 2nd row pedals: POG. AC, TS9, OCD, 1981, and the Strymon pedals using MIDI.

PATCHBAY MOD 1: 
1) Guitar Input
2) Amplifier out.
3) Wet Fx out left  
4) Wet Fx out right (or use for stereo out)
5) expression pedal input TRS 

Recording: Outputs 3 & 4 (Wet L and Wet R) into PC. Output 2 (amp) into miked amp or amp sim, into PC.

LIve: 3&4 direct to mixer for full wet/dry/wet, or set to stereo for two amps or mono for one amp (mono sum switch on Iridium). 

Pedal board also has a LED strip installed underneath (cool blue) and a Rockboard LED light on the left. 

Powered by a Zuma with 2 Ojai RC 30s (19 outputs used). 12v output used for LED strip, 18V output used for OCD.


Nick Costa & The Stray Crows - Large Board

Filippo Rimondi

Der MXR Tap Tempo-Schalter verfügt über eine einstellbare Tip/Ring-Konfiguration, sodass Sie die Verzögerungszeit einer Vielzahl von Delay-Pedaltypen steuern können. Dieser kleine Fußschalter ist robust gebaut und für ein langes Leben auf Tour geeignet.

The MXR Tap Tempo switch features adjustable tip/ring configuration so you can control the delay time of a wide variety of delay pedal types. This pint-sized footswitch is ruggedly built for a lifetime on the road.

MXR M199 TapTempo Switch

Paulo Damasceno Nepomuceno

Tuning used to be a necessary evil. The last barrier before you could get truly rocking. But now, tuning is ready to get blasted into the 21st century with PolyTune, the stomp-box sized tuning miracle from TC Electronic!

With PolyTune, you simply strum all strings on your guitar or bass at once, and it will immediately tell you which strings need tuning! It really is as simple as strum - tune - rock, and this quantum leap forward allows you to get in tune fast, and back to doing what you love: playing!

Review by Sound on Sound

Demo by ams.guitar

Polytune

QuickMount Type G 

Pedal-Montageplatte für Standard TC Electronic Pedale

Pedal Mounting Plate For Standard TC Electronic Pedals

BOSS

PS-6 Harmonist

PedalSafe Type E1

QuickMount Type E

Pedal-Montageplatte für Standard-Boss-Pedale

Pedal Mounting Plate For Standard Boss Pedals

Schutzabdeckung & RockBoard-Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & RockBoard Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Schutzabdeckung & universelle Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & Universal Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Für 10-20 FX-Pedale, 1 MOD-Slot - **622 x 424 mm / 24.49" x 16.69"** - erhältlich mit Gig Bag oder Flight Case

For 10 - 20 FX pedals, 1 MOD slot - **622 x 424 mm / 24.49" x 16.69"** - available with Gig Bag or Flight Case

This pedal board does it all - recording and live, stereo or mono, amp or sim. It has looping capabilities as well as volume/expression pedal.  

Use loop switcher for COMP, AC, TS9, OCD, TREM. Midi cable for Timeline/BigSky. 

Use A/B switch to switch between expression and volume pedal.

MOD 1: 
1) Guitar Input
2) left out (or mono for amps - select 'mono' on iridium)
3) right out
4) expression pedal or;
5) volume pedal input



Large Board - Wet/Dry/Wet

Ej Santos

Pro Jet

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 3 V2 ist eine Patchbay für Sänger und Akustik-Musiker. Über die zwei XLR-Ausgänge kannst du ein Stereo-Signal von dein MOD senden und an den XLR-Eingang lässt sich ein Mikrofon anschließen. Mit drei TRS-Through-Verbindungen lässt sich das MOD 3 V2 außerdem als zentraler Zugang und Ausgang des Boards nutzen um zum Beispiel Effektpedale in den FX-Loop eines Verstärkers einzuschleifen.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 3 x 6,3 mm TRS thru
- 2 x XLR thru (männlich vorne / weiblich hinten)
- 1 x XLR thru (weiblich vorne / männlich hinten)
- 1 x DC 2,1 x 5,5 mm Hohlstecker thru
- 1 x AC IEC thru (männlich vorne / weiblich hinten)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel


The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 3 V2 is a pass-thru box designed for use by vocalists and acoustic players. The 2x XLR outputs allow you to send a stereo signal from your MOD and the 1x XLR input can be used to connect your microphone. You can also use it to run several pedals from your board through the effects loop of your amp, or simply use the MOD as a central access point to your pedalboard.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 3 x 6,3 mm / ¼" TRS thru
- 2 x XLR thru (male front / female back)
- 1 x XLR thru (female front / male back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR Patchbay for Vocalists & Acoustic Players

Ej's Church Board

HT-Club 40

Designed for use anywhere you need a dual foot switch, with two foot switches and a 1/4" stereo jack.
Compact size with full metal shell, lightweight and durable.
Please note that the channels cannot be changed.