atakan germiyanoğlu

GermiyanBass

David Graves

Ausgestattet mit einer bassspezifischen Tuner-Schaltung für präzises Stimmen, selbst bei tiefen Frequenzen  
ULTRA BUFFER-Technologie, optimiert für Bass und umschaltbar auf True Bypass  
Einzigartiges Design mit großem Display in kompakter Größe  
Hohe Sichtbarkeit dank einstellbarer Helligkeit der Meter-LEDs  
Ultrapräzises Stimmen bis auf ±0,1 Cent genau  
Vier verschiedene Anzeigemodi

Equipped with a bass-specific tuner circuit for precise tuning, even at low frequencies
ULTRA BUFFER technology optimized for bass and switchable to true bypass
Unique design with a large display in a compact size
High visibility with meter LEDs which brightness can be adjusted
Ultra-precise tuning down to ±0.1 cents
Four meter display modes

KORG

Product Page

Review by recording.de

Review by bonedo

Manual

Demo by Musiker TV

Pitchblack XS Bass

Ron Bakalik

The Ground & Pound has been designed to combine the two pedals that Justin Chancellor uses to help achieve his signature distorted tone, the Turbo Rat with the Bass EQ, and it successfully combines them into a single box with a very compact and easy to use control layout.

We’ve also added a blend control, labelled ‘Mix‘,  which has a very musical compression ratio (2:1) on the clean signal. This mixes very well with the distorted sound and just adds to the overall playing experience.

Lusithand

Review by No Treble

ground and pound

ch ray

Quad Cortex is the most powerful floor modeler on the planet. With a total of 6 cores (4x SHARC+ and 2x ARM Cortex-A5 running at 500MHz each), this ludicrous amount of processing capacity provides limitless sound design possibilities.

Neural Dsp Technologies

Review by wired

Review by The Gear Page

Review by Fractal Audio Forum

Review by guitarguitar

Quad Cortex 2.0 manual

Demo by EytschPi42

Demo by Neural DSP

Quad Cortex

Michael Hodgson

The EP-25K features a 25K Ohm potentiometer that is required by some devices compared to the 10K potentiometer in the Mission EP-1. The two isolated outputs can be used to control two effects simultaneously.

Mission Engineering

Demo by Sean Pierce Johnson

EP-25K Expression pedal

Tim Rilke

The new DSM & Humboldt SIMPLIFIER BASS STATION is everything you ever needed to go direct to the FOH or recording amazing bass tones without sacrificing anything.  It includes a Bass Preamp with gain, level, and a 3 band EQ with semi-parametric mid control. A parallel signal routing with a selectable LPF, dual FX loop (for preamp and parallel signal), and an amazing analog cabinet simulation, based on the acclaimed Omnicabsim ® by DSM Noisemaker.

DSM & Humboldt

Official Product Video

Demo by benjudbass

Demo by Diego Ibarra

Demo by Bass Bonedo

Simplifier Bass Station

Tester

The new GLX-D+ Wireless Guitar Pedal System features the WA305 Premium Guitar Cable, the GLXD1+ Digital Bodypack, and the GLXD6+ Guitar Pedal. Go wireless without compromising your tone or complicating your rig.

Shure

Review by Premier Guitar

Review by Guitar World

Demo by Basscoach Denis Busch

GLXD16+

CIOKS

Crux

DC 7

Für 7-12 FX-Pedale, 1 MOD-Slot - **598 x 236 mm / 23.54" x 9.29"** - erhältlich mit Gig Bag oder Flight Case

For 7 - 12 FX pedals, 1 MOD slot - **598 x 236 mm / 23.54" x 9.29"** - available with Gig Bag or Flight Case

Roberto Gonzalez Lozano

ATTITUDE PEDAL BOARD

The new Bass Mid Control is the active mid-controller for bass players. A small but powerful pedal that provides frequency control adjustments between 120Hz ~ 3kHz. When using 2-band EQ or passive bass, the Frequency control provides excellent manipulation of the mid frequencies, while the Boost/Cut gives you boosting or cutting capabilities of up to + / - 12dB. This compact pedal can also be powered by a 9V battery or for additional headroom use an 18V power adapter. This pedal will provide you the flexibility to play any musical style.

E.W.S

Demo by Hablandoen Grave 

THE EBS OCTABASS BLUE LABEL PUSHES THE BOUNDARIES FOR WHAT HAS BEEN SEEN AS POSSIBLE WITH AN ANALOG OCTAVE EFFECT. THE QUALITY AND CHARACTER OF THE OCTAVE TONE, AS WELL AS THE PRECISION AND SPEED OF THE TRACKING, ARE OUTSTANDING.   
The EBS OctaBass was the first effect unit ever made by EBS. It is famous for fast and accurate tracking and a fat, natural sound. When you play your instrument, it "tracks" the note you play and produce a sound one octave below to mix in with the note you play.  The 'Blue Label' model has a couple of new features that enhance the tracking range and improves the control of the sound.

Demo by BassTheWorld

OctaBass Blue Label

Dunlop

CBM105Q Crybaby Mini Bass Wah

Jonny Dibble

The BASSRIG ’64 Black Panel is, quite simply, a complete vintage bass amp in a pedal. Based on Fender®’s Showman® and Bassman® amplifiers, we have used all-analogue circuitry to recreate a complete valve amp-style signal path, along with an all-analogue cabinet simulator, giving you the drive, grit and articulation of these classic amps in one small box.

Origin Effects

Demo by Andertons

Demo by The Bass Channel

Demo by BassTheWorld.com

Official Product Video 

BASSRIG  ’64 Black Panel

daniel lee

The Cali76 Bass Compressor is a studio-grade compressor pedal inspired by the world-famous Urei® 1176® studio compressor, heard on many of the greatest studio recordings since the 1960s. The Cali76 Bass Compressor uses uncompromising all-analogue circuitry to make these distinctive, ultra-fast FET compression tones available to the modern guitarist. 

The latest in a long lineage of Cali76 compressors, the Cali76 Bass Compressor features a full set of studio-style controls, a DRY knob for parallel compression and an improved sidechain that matches the response of our sought-after “large format” Cali76 – the pedal that put Origin Effects on the map back in 2012.

Demo by IvanBassist

Review by Compressor Pedal Reviews

Review by reddit /basspedals

Cali76 Bass Compressor (Super Vintage Blue)

The Cali76 Bass Compressor is a studio-grade compressor pedal inspired by the world-famous Urei® 1176® studio compressor, heard on many of the greatest studio recordings since the 1960s. The Cali76 Bass Compressor uses uncompromising all-analogue circuitry to make these distinctive, ultra-fast FET compression tones available to the modern guitarist.

The latest in a long lineage of Cali76 compressors, the Cali76 Bass Compressor features a full set of studio-style controls, a DRY knob for parallel compression and an improved sidechain that matches the response of our sought-after “large format” Cali76 – the pedal that put Origin Effects on the map back in 2012.

With a 10-LED gain reduction meter, a pedalboard friendly enclosure and massive headroom thanks to internally increased voltage, the Cali76 Bass Compressor marks the culmination of over a decade of experience making the world’s finest compressor pedals.

Demo by  BassTheWorld.com

Review by Gearnews

Review by AMAZONA

Manual download

Cali76 Bass Compressor (64 Black Panel)

“This pedal is a distillate of several important principles in the signal chain for bass. Compression, distortion, tone-shaping and blending all together.” - Billy Sheehan

EBS Billy Sheehan Ultimate Signature Drive

Guitar Interactive Magazine review 

Billy Sheehan Ultimate Signature Drive Users Manual

Billy Sheehan review on his EBS Signature pedal 

Billy Sheehan Ultimate Signature Drive

Sam McAinch

The BASSRIG Super Vintage is, quite simply, a complete vintage bass amp in a pedal. Based on the iconic Ampeg® SVT®, we have used all-analogue circuitry to recreate a complete valve amp-style signal path, along with an all-analogue cabinet simulator, giving you all the warmth, feel and drive of this classic bass rig in one small box.
When the SVT® arrived on the scene in 1969, it rewrote the rulebook for purpose-built bass amplification. Thanks to its enormous power, deep bass, growling overdrive and purposeful control set, this tower of tone has remained the amp of choice for the most discerning bassists on the world’s biggest stages.
With XLR and ¼” outputs, the BASSRIG Super Vintage will fit seamlessly into any signal chain, no matter how simple or complex, and our powerful Amp Out EQ tailors your sound to work with any amp, meaning you never have to compromise on tone.

Demo by Origin Effects with Ian Allison

BassRig Super Vintage

Für 7-12 FX-Pedale, 1 MOD-Slot - **470 x 330 mm / 18.50" x 12.99"** - erhältlich mit Gig Bag oder Flight Case

For 7 - 12 FX pedals, 1 MOD slot - **470 x 330 mm / 18.50" x 12.99"** - available with Gig Bag or Flight Case

Wizavd Poolsup

BTB7MS 

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 3 V2 ist eine Patchbay für Sänger und Akustik-Musiker. Über die zwei XLR-Ausgänge kannst du ein Stereo-Signal von dein MOD senden und an den XLR-Eingang lässt sich ein Mikrofon anschließen. Mit drei TRS-Through-Verbindungen lässt sich das MOD 3 V2 außerdem als zentraler Zugang und Ausgang des Boards nutzen um zum Beispiel Effektpedale in den FX-Loop eines Verstärkers einzuschleifen.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 3 x 6,3 mm TRS thru
- 2 x XLR thru (männlich vorne / weiblich hinten)
- 1 x XLR thru (weiblich vorne / männlich hinten)
- 1 x DC 2,1 x 5,5 mm Hohlstecker thru
- 1 x AC IEC thru (männlich vorne / weiblich hinten)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel


The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 3 V2 is a pass-thru box designed for use by vocalists and acoustic players. The 2x XLR outputs allow you to send a stereo signal from your MOD and the 1x XLR input can be used to connect your microphone. You can also use it to run several pedals from your board through the effects loop of your amp, or simply use the MOD as a central access point to your pedalboard.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 3 x 6,3 mm / ¼" TRS thru
- 2 x XLR thru (male front / female back)
- 1 x XLR thru (female front / male back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR Patchbay for Vocalists & Acoustic Players

Wizavd 1

Alex  Wilkins

When we released our original Compressor back in 2011, it quickly became a favourite among guitar and bass players alike who were searching for something more than the typical oversimplified controls found on most compressor pedals. Although our original Compressor sounded great on bass (and still does!) we set out to do even better. 
On top of the full range of features and controls normally only seen in high end studio equipment, such as input and gain reduction metering, independent attack and release controls, a mix knob for parallel compression, and an external sidechain insert, we’ve now added a fully variable sidechain high pass filter, and a two position ‘tone + colour’ circuit which adds gentle tone sculpting and harmonic distortion, giving your bass some delicious character.  

Empress Effects

Review by bassic

Review by CompressorPedalReviews

Demo by Pertybass

Bass Compressor Blue Sparkle

Diedrich Rivera

Der Canvas Mono ist ein Direct Box/Line Isolator, der jeden Widerstand zwischen Ihnen und Ihrem Publikum beseitigt und eine makellose Klanggrundlage schafft, auf der Sie Ihr Meisterwerk aufbauen können. Von Gotteshäusern bis zur Kneipe in der Innenstadt ist Canvas Mono als Performance-Tool konzipiert, das Sie überall hin mitnehmen können, wo Sie Ihre Musik machen.

The Canvas Mono is a Direct Box/Line Isolator designed to remove any resistance between you and your audience by giving a pristine sonic foundation to build your masterpiece upon. From houses of worship to the dive bar downtown, Canvas Mono is built to be the performance tool that goes wherever you are making your music.

Walrus Audio

Demo by

Canvas Line Isolator / D.I.

QuickMount Type B

Pedal-Montageplatte für Standard-Einzelpedale

Pedal Mounting Plate For Standard Single Pedals

Isp Technologies

Deci-Mate

Mit dem Opus Two Notes bringt der französische Hersteller eine Kombination aus DI-Box, IR-Loader und Modeling-Amp auf den Markt. Das Opus basiert auf dem C.A.B. M aus gleichem Hause und kann als digitale Speakersimulation (IR-Loader) zwischen Amp und Box verwendet werden. Dank eines neu entwickelten Pre- und Power-Amp-Modelings namens TSM („Tube Stage Modeling“) ist zusätzlich möglich, das Opus im Standalone-Modus als (MIDI-fähigen) Pedalboard-Amp zu betreiben. Hierzu liefert Two Notes eine eigens entwickelte Sammlung von über 600 Impulsantworten (DynIRs), von denen 32 bereits auf dem Opus vorinstalliert sind und mit einer Auswahl an Effekten (Reverb, Enhancer und EQ) kombiniert werden können.

Two Notes has unveiled the “next milestone evolution” of its highly acclaimed Torpedo CAB IR loader, the Opus – a “masterpiece” of a product that expands its predecessor's feature set with pre and power-amp simulation.

Prior to the arrival of the Opus, Two Notes’ CAB – and, later, CAB M+ – were considered some of the industry’s leading cabinet simulation units, offering at first exclusively DynIR Virtual Cabs from Victory, Celestion, Engl and more (with an assortment of mic types and room emulation), and then later a sole clean preamp for added versatility.

To that end, the Opus goes above and beyond just cab sims, and brings to the table fully fledged Tube-Stage Modeling pre- and power-amp sims, MIDI integration and USB-C connectivity.

Two Notes Audio Engineering

Official Product Page

Ensemble Queen Top Guitar Review - PL

Ensemble Queen - Bass Chorus Review Muzikus CZ

Mooer Ensemble Queen - Review

Demo by Andertons 

Demo by Pete Thorn 

Review by GUITAR WORLD 

Review by bonedo 

Opus

Le Bass Dual Channel Preamp

Mit der 200-Serie präsentiert BOSS eine neue, kompakte Pedal-Generation, die mit hochwertigem Sound, außergewöhnlicher Vielseitigkeit und minimalem Platzbedarf auf deinem Pedalboard überzeugt. Dank intuitiver Regler und multifunktionaler Schalter gestaltet sich die Bedienung einfach und intuitiv. Zusätzlichen Komfort bieten die internen Speicherplätze, über die du deine eigenen Setups bei Bedarf unmittelbar abrufen kannst. Die hohe Audioqualität der Pedale der 200-Serie basiert auf einer 32 Bit AD/DA-Wandlung, 32 Bit internen Signalverarbeitung und 96 kHz Samplingrate. Weiterhin kannst du die Pedale optional über externe Umschalter, ein Expression-Pedal oder via MIDI steuern.

With the 200 series, BOSS introduces a new generation of pedals that pack advanced sound and versatility into a streamlined size that saves space on your board. Grab-and-go controls and multi-function switches make operation easy and intuitive, while onboard memories allow you to store multiple setups for instant recall. All 200 series pedals feature premium audio quality with 32-bit internal processing and offer support for external control via footswitches, an expression pedal, or MIDI.

BOSS

Review by Joe Charupakorn, premierguitar.com

Review by Dimitri, amazona.de

Review by Michael Behm, bonedo.de

Demo by Rabea Massaad

EQ-200 Graphic Equalizer

"When you see an aging building or a rusted bridge, you are seeing nature and man working together"

OAMP is an output driver designed to replace a conventional output buffer or gain pedal at the end of your chain. If you’re familiar with EUNA, it’s a similar concept but with a few key differences. High headroom, clean gain, great drive capability. They key features are labeled below. There are subtle tonal variations in the gain settings. Maximum clean output level is 20dB. 29dB of gain available. OAMP makes enough gain to drive your amp into breakup without adding it’s own distortion, or you can use it to trim hot signals from your pedalboard. The insert loop is active when OAMP is OFF, so you can easily swap from clean drive to a dirt pedal, alternative preamp or anything you want really. With nothing plugged into the insert OAMP is True-Bypass when switched off.

29 Pedals

Review by American Songwriter

Review by Guitar.com

Demo by collector//emitter

Demo by MAS Distro

OAMP

Dave Burnett

The J48 is a high performance active direct box for live concert touring and professional recording studio applications, with the ability to handle extreme transients without distortion while delivering the natural sound of your instrument.

Radial Engineering

Demo by Radial Engineering

J48 Stereo

Review by American Songriter

Review by reddit /guitarpedals

EUNA

Matthis LEMONNIER

The DigiTech® Drop is a dedicated polyphonic drop tune pedal that allows you to drop your tuning from one semitone all the way down to a full octave. Get down-tuned chunk without having to change guitars! The Drop also features a momentary/latching switch. With the switch set to momentary, you can turn the Drop into a true performance pedal. Fast trills and roller-coaster pitch dips are at the tip of your

DigiTech

Demo by Agufish

Demo by Reinaldo Lopez

Review by Guitar Gear Finder

Drop

Vitoos

AD5S LINK

Board Wizavd 1

Patrick Brogan

2 Working Modes: Hard/Soft
Hard: Provide hard effect of noise reduction.
Soft:  Provide soft effect of noise reduction
Full metal shell
Very small and exquisite
True bypass

MOOER

Demo by Justin Blair

Review by Stephan Güte, amazona.de

Noise Killer

PedalSafe Type K1

QuickMount Type K

Pedal-Montageplatte für Mooer Micro Series Pedale und ToneX One

Pedal Mounting Plate For Mooer Micro Series Pedals and ToneX One

Schutzabdeckung & RockBoard-Montageplatte für MOOER Micro Series Effektpedale

Protective Cover & RockBoard Mounting Plate for MOOER Micro Series effect pedals 

Schutzabdeckung & universelle Montageplatte für MOOER Micro Series Effektpedale

Protective Cover & Universal Mounting Plate For MOOER Micro Series effect pedals 

Kompressor Pedal für E-Bass
CHT "Constant Headroom Technology" für klare und saubere Tonqualität
Regler für Output, Input, Release, Attack und Ratio 
Led Kette mit 10 LED für "Gain reduction" Anzeige
Status-LED
True Bypass
stabiles Metallgehäuse
Betrieb mit 9V-Batterie oder Dunlop ECB-003 AC Adapter (optional)
Made in USA


Take your favorite studio compressor to the stage with the MXR M87 Bass Compressor. A complete array of controls (Attack, Release, Ratio, Input, and Output) makes it easy to fine-tune your sound, from subtle peak limiting to hard squashed compression effects. Its Constant Headroom Technology gives you plenty of headroom and clear performance. This totally transparent compressor allows your full dynamic range to shine through until your signal reaches the compression threshold, which is indicated by the ten, highly visible gain-reduction status LEDs. It´s all packed into a durable, lightweight aluminum-housing pedal that´s the size of a Phase 90.

Review by awkwardsounds

Review by PREMIER Guitar 

Review by Compressor PedalReviews

Demo by Bass The World 

M87 Bass Compressor

Matias Jaques

The Torpedo C.A.B. M+ takes Two Notes’ acclaimed cabinet emulation technology and packs it into a pedalboard-friendly enclosure. Thanks to this speaker cabinet emulator pedal, you can bypass your guitar or bass amplifier’s cabinet while preserving every ounce of your tone and spatial dimension. This pedal is loaded right out of the box — you get 32 guitar and bass cabinets, eight power amplifiers, eight microphones, and eight rooms. And if you’ve upgraded to the latest firmware, you also get a high-headroom clean preamp emulation, transforming the C.A.B. M+ into a premium-sounding clean pedal platform, complete with studio-grade effects. 

Demo by Riffs, Bears & Gear

Demo by Guitar Bonedo

Review by Sound on Sound

CAB M+

Voodoo Lab

Pedal Power 2 Plus

Chris Bones

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 1 V2 ist eine Pass-Through-Box, die speziell für Gitarristen und Bassisten entwickelt wurde. Du kannst das MOD 1 V2 nutzen um mehrere Pedale deines Setups im Front End und im Effekt-Loop des Verstärkers zu postieren (4-Kabel Methode) oder die vier TRS-Anschlüsse als zentralen Zugang und Ausgang des Boards nutzen. Die XLR-Through-Verbindung kann als Signalausgang vom Pedalboard zum Mischpult oder zur PA verwendet werden.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 5 x 6,3 mm TRS thru
- 1 x XLR thru (männlich vorne / weiblich hinten)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 5 x 6,3 mm / ¼" TRS thru
- 1 x XLR thru (male front / female back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR, IEC & Barrel Patchbay

Chris Bones / Twisted Rose

1987XX

Seit Mitte der sechziger Jahre wird der Großvater unter den Wah-Wah Pedalen in nahezu unveränderter Weise gebaut. Ein Cry Baby hat fast jeder Gitarrist schon einmal unter seinen Füßen gehabt.

The Cry Baby Classic Wah is a modern take on a classic sound. Dunlop's engineers re-tuned the Cry Baby Standard Wah circuit to have a lower frequency center and a more subtle effect while adding the legendary Fasel® Inductor to create the gorgeous tone, voice, and sweep of early Cry Baby pedals. For tonal purists, the Cry Baby Classic Wah also features true bypass switching.

GCB-95F Crybaby Classic

GLXD16+ von Shure