jan roger hafsund

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 1 V2 ist eine Pass-Through-Box, die speziell für Gitarristen und Bassisten entwickelt wurde. Du kannst das MOD 1 V2 nutzen um mehrere Pedale deines Setups im Front End und im Effekt-Loop des Verstärkers zu postieren (4-Kabel Methode) oder die vier TRS-Anschlüsse als zentralen Zugang und Ausgang des Boards nutzen. Die XLR-Through-Verbindung kann als Signalausgang vom Pedalboard zum Mischpult oder zur PA verwendet werden.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 5 x 6,3 mm TRS thru
- 1 x XLR thru (männlich vorne / weiblich hinten)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 5 x 6,3 mm / ¼" TRS thru
- 1 x XLR thru (male front / female back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR, IEC & Barrel Patchbay

Rectifier

ch ray

Line 6 HX Stomp ist ein professioneller Gitarrenprozessor, der den Klang von Helix-Verstärkern, -Boxen und -Effekten in einem ultrakompakten Pedal liefert. Egal, ob Sie lieber ein traditionelles Amp-and-Pedal-Setup spielen oder direkt auf die Bühne oder ins Studio gehen, HX Stomp lässt sich nahtlos in eine Vielzahl von Umgebungen und Anwendungen integrieren. Das HX Stomp-Gitarrenpedal verwendet dieselbe DSP- und HX-Modellierungstechnologie wie seine größeren Helix-Brüder und passt dennoch problemlos auf Ihr Pedalboard oder sogar in die Tasche Ihres Gigbags. Es gibt über 300 Ampere, Kabinen und Effekte – einschließlich eines Loopers. HX Stomp enthält dieselben HX-Modelle wie die Produkte der Helix-Familie sowie die Legacy-Effektbibliothek der Line 6 M-Series-Pedale und Stompbox-Modellierer wie den DL4. Verwenden Sie es als "Super-Stompbox", als Backup- oder Travel-Rig, als zusätzlichen Tonexpander in Kombination mit anderen Modellierern, als Audio-Interface - oder sogar als komplettes Gitarren- oder Bass-Rig.

Line 6 have been at the forefront of the digital modelling world for over 20 years now, pushing the boundaries of guitar technology is nothing new for them and their flagship product, the Helix, has taken the guitar world by storm. With the scaled down Helix, the HX, becoming a go to for players, its latest version, the HX Stomp is sure to generate loads of interest!

The HX Stomp is the ultimate streamlined version of this superstar pedal. Constructed as a 3 pedal unit, the HX Stomp features the same processor as the Helix, meaning you get over 300 effects including legacy lines from the M Series, 8 simultaneous amp, cab and effects blocks, TRS dual expression pedal inputs and a stereo effects loop, it's a serious pedal!

It's super comprehensive but really user intuitive. Built with the working player in mind, it has a solid aluminium construction that can take the rigours of the road, perfect on stage or in the studio, the Helix is the future of multi effects.

LINE 6

Product Page

Review by musicradar

Review by bonedo

Review by Gitarre & Bass

Manual

Official Product Video

Demo by Guitar Bonedo

Demo by Bernd Kiltz - Gitarrenvideos

HX Stomp Black

PedalSafe Type L6

QuickMount Type L6

Pedal-Montageplatte für LINE6 HX Stomp Pedale

Pedal Mounting Plate for LINE6 HX Stomp pedals

Schutzabdeckung & RockBoard-Montageplatte für LINE6 HX Stomp Pedale

Protective Cover & RockBoard Mounting Plate For LINE6 HX Stomp pedals

Schutzabdeckung & universelle Montageplatte für LINE6 HX Stomp Pedale

Protective Cover & Universal Mounting Plate For LINE6 HX Stomp pedals

Isen Ritchie

- Multi-Watt™ channel assignable power amp allows you to assign either 2 or all 4 EL-34 power tubes to each channel for power ratings of 50 or 100 watts of class A/B power via independent 50/100 watt power switches
- 4xEL-34, 5x12AX7, 2x5U4
- Fixed Bias
- 2 Independent Channels: Channel 1 = Fat Clean, Tite Clean, Crunch; Channel 2 = Crunch, Tite Gain, Fluid Drive
- Channel Assignable Dual Rectification with Recto Tracking™ (Diode or Tube Tracking)
- Independent gain, treble, mid, bass, presence & master controls per channel
- Bold/Spongy “Variac” switch
- Output Level control (over all channels when activated)
- Footswitchable Solo Level control (over all channels when activated)
- Fully Buffered FX Loop with Send Level Control (over all channels when activated)
- True “Hard” bypass switch that removes FX Loop, Output Level & Solo Level controls from signal path
- Switching jacks on back for channels 1, 2 & solo
- 2 button footswitch (Channel 1/2 & Solo)
Width: 25 1/2"

Mesa Boogie

Stiletto Deuce Stage II

Adzim Ezani

HX® One is a powerful stereo effect pedal in an ultra-compact enclose that easily fits onto any pedalboard. It features intuitive controls, 250+ effects taken from HX family processors, a unique Flux Controller, a jack for connecting an optional expression pedal or two footswitches, adjustable input impedance, MIDI capabilities, and a choice of true or buffered DSP bypass.

Demo by Line 6

HX One

QuickMount Type C

Pedalmontageplatte für große vertikale Pedale

Pedal Mounting Plate For Large Vertical Pedals

Tester

Das Electro Harmonix Oceans 12 ist ein Stereo-Reverb-Pedal, das, wie der Name schon erahnen lässt, mit gleich 12 verschiedenen Reverb-Modi den Spieler beglücken möchte. Damit hat das Oceans 12 im Gegensatz zum seinem ebenfalls von uns getesteten Vorgänger, dem Oceans 11, noch einen Algorithmus mehr an Bord. Viel entscheidender ist aber die Möglichkeit, gleich zwei Reverbs parallel oder in Serie zu schalten, und das in Stereo.

The EHX Oceans 12 is the Oceans 11’s big brother with even more reverbs and functionality. It features two simultaneous, independent, stereo reverb engines, series and parallel control for the dual reverbs, 24 presets and advanced I/O allowing for stereo in/out or mono send/return with pre and post reverb options. The pedal also includes a new Tide Control for stereo image alteration, a Lo-fi Control, an infinite attenuation control and an input jack for external expression and 3-button footswitch control.

A Tails switch provides a choice of whether the reverb effect fades out naturally or stops immediately when the pedal is switched to bypass. In most settings the pedal is also capable of producing infinite reverb which can be played over with a different reverb effect.

The Oceans 12’s reverbs are:
• ROOM – two modes: reverb algorithms modeled after a lively room and a spacious performance hall
• SPRING – two modes: vintage 1962 Fender® 6G15 tube reverb emulation and the spring algorithm from the EHX Holy Grail
• PLATE – two modes: two emulations of the smooth, metal plate reverb often used in high-end recording studios during the 1960s and ‘70s
• REVERSE – two modes: a reverse reverb effect as well as true reversed echoes
• ECHO – three modes: a digital delay with various echo rhythms feeding into a plate reverb
• TREM – three modes: a classic, periodic volume envelope with various shapes applied to both the wet and dry mix of a hall reverb
• MOD – three modes: combinations of chorus and flange reverbs that create rich reverb tails
• DYNA – three dynamic, experimental reverb algorithms: swell, gate and duck
• AUTO-INF – three modes: auto-infinite reverb (w/optional chorus or flange) that “listens” to your playing and crossfades to a new reverb wash upon detection of newly struck notes.
• SHIMMER – two modes: two configurations of a rich octave-shifted reverb wash
• POLYPHONIC – two modes: two configurable bi-directional pitch shifts that add dimensionality to the reverb tail
• RESONANT – two modes: reverb excited by tunable resonators and configurable self-oscillating filters on the reverb tail

2 simultaneous, independent, stereo reverb engines
Series and parallel control for the dual reverbs
24 presets
Stereo in/out or mono send/return with pre and post reverb options
Tide Control for stereo image alteration
Lo-fi Control
Infinite attenuation control
Tap tempo to set your pre-delay time, echo time and more
Input jack for external expression and 3-button footswitch control
Power supply included

Electro-Harmonix

Product Page 

Review by PREMIER Guitar 

Review by AMAZONA 

Review by bonedo  

User Manual

Demo by Premier Guitar 

Oceans 12 Dual Stereo Reverb

PedalSafe Type C

Schutzabdeckung & RockBoard-Montageplatte für große vertikale Pedale

Protective Cover & RockBoard Mounting Plate For Large Vertical Pedals

Schutzabdeckung & universelle Montageplatte für große vertikale Pedale

Protective Cover & Universal Mounting Plate For Large Vertical Pedals

David Litaba

MOD 11 Modulator

PedalSafe Type A1.1

QuickMount Type A

Pedal-Montageplatte für Standard-Einzelpedale

Pedal Mounting Plate For Standard Single Pedals

Schutzabdeckung & RockBoard-Montageplatte für MXR® Standardgröße und Dunlop® Echoplex Delay Pedale

Protective Cover & RockBoard Mounting Plate For MXR® standard size and Dunlop® Echoplex Delay pedals

Schutzabdeckung & universelle Montageplatte für MXR® Standardgröße und Dunlop® Echoplex Delay Pedale

Protective Cover & Universal Mounting Plate For MXR® standard size and Dunlop® Echoplex Delay pedals

Nano Small Stone

Flavio Salcuni

It's active Treble, Bass ,Gain and Volume controls allow for limitless tone shaping. Added Gain switch for even fatter tones!. The RC Booster V2 offers a super transparent 20db+ clean boost and a +- 15db 2 band active EQ without ever compromising the integrity of the original TONE. It provides a solution to sound degradation, caused by long instrument cables and/or long effect chains between guitar and amp, by strengthening the original signal. True bypass for eliminating any signal interference when switched off. Can be used with AC adaptor (optional) or 9V Battery.

Xotic

Review by Humbucker Music

Demo by Peter Honoré

Demo by Buddy Blues

RC Booster V2

RockBoard

Mit dem neuen Kirk Hammett Cry Baby Wah kannst du jetzt den gleichen Killer-Wah-Sound wie Kirk haben. Entwickelt in enger Zusammenarbeit mit der Metal-Gitarren-Ikone selbst, wurde es akribisch abgestimmt und optimiert, um den Wah-Sound zu liefern, der Metal-Soli revolutioniert hat. Dies ist der legendäre Ton, den Kirk auf Tour mit seinem Cry Baby Rack Wah erzeugt. Dieses Pedal ist außergewöhnlich gleichmäßig in der Ansprache, wenn du dich von der Ferse bis zu den Zehen bewegst, mit einem dicken Top-End und vollem Dynamikbereich.

Now you can command the same killer wah tone as Kirk with the new Kirk Hammett Cry Baby Wah. Developed in close collaboration with the metal guitar icon himself, it has been meticulously tuned and tweaked to deliver the wah sound that revolutionized metal solos. This is the legendary tone that Kirk dials in on tour using his Cry Baby Rack Wah. Dunlop's engineers took Kirk's EQ, volume and tone settings—reflecting decades of blazing Cry Baby riffology—and reproduced them with exacting precision. This pedal is exceptionally even in response as you move from heel to toe, with a thick top end and full dynamic range. Dare to step into the footprint of a giant. Own a piece of the legend: the Kirk Hammett Signature Wah from Dunlop.

Dunlop

Review by SweetWater 

Demo by Guitar World 

Demo by SweetWater 

KH95 Crybaby

QuickMount Type M

Pedal-Montageplatte für Dunlop Cry Baby Wah-Pedale

Pedal Mounting Plates For Dunlop Cry Baby Wah Pedals

The EHX Oceans 11 is a compact, affordable pedal packed with advanced functionality and 11 reverb styles ranging from essential to exotic.

Oceans 11

PedalSafe Type A2

Schutzabdeckung & RockBoard-Montageplatte für ELECTRO HARMONIX Nano Series und MXR Effektpedale mit Standardgehäuse (2 In & 2 Out) und für die meisten Effektpedale mit den Gehäusemaßen von ca. 112 x 60 x 30 mm

Protective Cover & RockBoard Mounting Plate For ELECTRO HARMONIX Nano Series and MXR effect pedals with standard enclosure (2 In & 2 Out) as well as for most other effect pedals with enclosure dimensions of about 112 x 60 x 30 mm

Schutzabdeckung & universelle Montageplatte ELECTRO HARMONIX Nano Series und MXR Effektpedale mit Standardgehäuse (2 In & 2 Out) und für die meisten Effektpedale mit den Gehäusemaßen von ca. 112 x 60 x 30 mm

Protective Cover & Universal Mounting Plate For ELECTRO HARMONIX Nano Series and MXR effect pedals with standard enclosure (2 In & 2 Out) as well as for most other effect pedals with enclosure dimensions of about 112 x 60 x 30 mm

Roberto Beretta

Sennheiser

XSW-D

DigiTech

Review by Bonedo 

Demo by Thoman's Guitars & Basses

Bad Monkey

The GRID SLAMMER™ overdrive pedal produces a variable boost in gain over a wide range with a classic, guitar-centric midrange bump that enhances many different playing styles. It’s a true overdrive “specialist” that covers an amazing array of what many top players consider the most expressive and musical ranges of overdrive. From sweet, subtle breakup to a harmonically smoldering overdrive that can both sting and sing, the GRID SLAMMER sets a new bar in legendary overdrive! 

Demo by EytschPi42

Grid Slammer

Featuring seven inspirational Lexicon® reverbs, the DigiTech® Polara will be the new architect of your soundscape, defining space and adding dimension to your playing. The Polara’s flexible reverbs cover a full spectrum, from the intimate warmth of “Room”, to the vast expansiveness of “Hall”, through time with the cosmic power of “Reverse”, and anchored by Lexicon’s revered “Modulated”, “Plate” and “Spring” reverbs. In addition to those classics, the Polara introduces the new “Halo” reverb. The “Halo” reverb with cascading octaves interspersed in the reverb decays will cast a heavenly glow over your tone. With its new, compact size and soft-touch vacuum-style footswitch, the Polara truly represents the latest evolution in DigiTech pedal design. We’ve put years of experience into every detail of its mechanical and sonic blueprint. The Polara offers independent Level, Liveliness, Decay and Type controls; Stereo Inputs and Outputs; a Soft Click Footswitch; and a Reverb Tails On/Off Toggle Switch. It is true bypass, and uses a 9V DC power supply to easily integrate into your existing pedalboard.

Review by bonedo 

Quick Start Guide

POLARA

Das Digitech Obscura Altered Delay Pedal gehört zu der Effektgattung, die als essentieller Bestandteil auf den allermeisten Effektboards zu Hause ist und entsprechend zahlreich auch in den unterschiedlichsten Ausführungen im Markt angeboten wird. Während in den letzten Jahren die Anhänger der Analogtechnik wieder vermehrt ihre geliebten Vintage-Delays mit Originaltechnologie finden konnten, versucht die digitale Fraktion, außer mit hoher Signaltreue, Programmierbarkeit und vielen weiteren mehr oder weniger alltagstauglichen Gimmicks, auch mit der möglichst originalgetreuen Nachbildung der legendären analogen Echoeffekte zu punkten.

The Obscura Altered Delay from DigiTech allows you to turn your delays upside down and inside out. The Obscura’s four delay types can be darkened, degraded and distorted on the fly with the stacked Tone and Degrade controls. Combine these controls with the Obscura’s Repeat/Hold feature and lose yourself in long, trippy, gurgling repeats or backwards-manipulated sonic mayhem. In addition to its Tone and Degrade controls, the Obscura features independent Level, Delay Mode and stacked Time and Repeats controls. Complimenting those versatile controls, the Obscura offers four excellent-sounding Analog, Tape, Lo-Fi, and Reverse types, Tap Tempo mode with Beat Divisions, Stereo Inputs/Outputs, a Delay Tails On/Off Switch and True Bypass circuitry. With its compact size and vacuum-style footswitch, the Obscura furthers DigiTech’s evolution in pedal design. We’ve put years of experience into every detail of its mechanical and sonic blueprint. The Obscura uses a 9V DC power supply to easily integrate into your existing pedalboard.

Review by Guitar 

Review by Guitarre&Bass 

Demo by ProGuitarShopDemos 

Demo by Gear4music

OBSCURA

The pxl-live is the newest member of the joyo pxl series programmable pedal controllers - pxl4, pxl8, pxl-pro. The pxl-live is a very powerful pedal controller. It not only has dual 4 channel outputs like the pxl-pro, and dual (relay)switch outputs for channel switching, it also has MIDI out. Programmable MIDI commands can be sent enabling you to control MIDI enabled devices such as: effect pedals, effects racks, keyboards or amps through the MIDI port. The pxl-live can send MIDI cc and MIDI program change commands at the same time and will allow “Hands free”control of your computer recording software. For musicians who own a lot of musical gear, the pxl-live will be the perfect pedal controller to make life easier. 

JOYO

Review by reddit /guitarpedals

PXL-LIVE Loop Switcher

Für 9-15 FX-Pedale, 1 MOD-Slot - **622 x 330 mm / 24.49" x 12.99"** - erhältlich mit Gig Bag oder Flight Case

For 9 - 15 FX pedals, 1 MOD slot - **622 x 330 mm / 24.49" x 12.99"** - available with Gig Bag or Flight Case

Peter Kummer

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 3 V2 ist eine Patchbay für Sänger und Akustik-Musiker. Über die zwei XLR-Ausgänge kannst du ein Stereo-Signal von dein MOD senden und an den XLR-Eingang lässt sich ein Mikrofon anschließen. Mit drei TRS-Through-Verbindungen lässt sich das MOD 3 V2 außerdem als zentraler Zugang und Ausgang des Boards nutzen um zum Beispiel Effektpedale in den FX-Loop eines Verstärkers einzuschleifen.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 3 x 6,3 mm TRS thru
- 2 x XLR thru (männlich vorne / weiblich hinten)
- 1 x XLR thru (weiblich vorne / männlich hinten)
- 1 x DC 2,1 x 5,5 mm Hohlstecker thru
- 1 x AC IEC thru (männlich vorne / weiblich hinten)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel


The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 3 V2 is a pass-thru box designed for use by vocalists and acoustic players. The 2x XLR outputs allow you to send a stereo signal from your MOD and the 1x XLR input can be used to connect your microphone. You can also use it to run several pedals from your board through the effects loop of your amp, or simply use the MOD as a central access point to your pedalboard.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 3 x 6,3 mm / ¼" TRS thru
- 2 x XLR thru (male front / female back)
- 1 x XLR thru (female front / male back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR Patchbay for Vocalists & Acoustic Players

scott delony

Pushing the boundaries of bass innovation, Anagram is our most powerful and versatile multi-effect unit yet. More than just an effects processor—it’s a revolution. With ultra-low latency, deep customization, and seamless integration into the Darkglass ecosystem, it empowers bassists like never before, from studio precision to stage power.

Designed for effortless creativity, Anagram delivers studio-quality sound, advanced signal chain editing, and the groundbreaking Neural Amp Modeler (NAM) technology—all within a compact footprint that accommodates any pedalboard. Fun to use, inspiring to explore, and limitless in sonic potential, Anagram doesn’t just shape tone—it unlocks new ways of assembling music.

Darkglass Electronics

Demo by Sweetwater

Demo by Leo Gibson

Demo by The Bass Channel

Demo by Nate Navarro 

Anagram

Matt Johnson

Die Helix® Stadium Family von Verstärker- und Effektprozessoren setzt neue Maßstäbe – genau wie der ursprüngliche Helix-Prozessor. Durch den Einsatz leistungsstarker DSPs und der völlig neuen Agoura™-Modellierungsmethodik bieten sie außergewöhnlichen Klang und Ansprache auf Spiel­dynamik, eine ausgefeilte und dennoch intuitive Benutzeroberfläche sowie unerreichte Steuerungsmöglichkeiten. Zudem sind alle Helix/HX®-Presets mit den Helix Stadium-Prozessoren kompatibel. Zur Helix Stadium Family gehören die Helix Stadium XL Floor- und Helix Stadium Floor-Prozessoren, die Expand D10 Digital-I/O-Erweiterungseinheit, das EX2™ Expression-Pedal-/Toe-Switch-Paar und der Helix Stadium Backpack. Lassen Sie Helix Stadium Produkte Ihre musikalische Vision verwirklichen.

Helix® Stadium Family amp and effects processors establish a new benchmark—just as the original Helix processor did. Leveraging powerful DSP and the entirely new Agoura™ modeling methodology, they deliver extraordinary sound and responsiveness to playing dynamics, a sophisticated yet intuitive user interface, and unparalleled control capabilities. Plus, legacy Helix/HX® presets are compatible with Helix Stadium processors. The Helix Stadium Family comprises the Helix Stadium XL Floor and Helix Stadium Floor processors, the Expand D10 digital I/O expansion unit, the EX2™ expression pedal/toe switch, and the Helix Stadium Backpack. Let Helix Stadium products help you realize your musical vision. 

Helix Stadium Floor

TAI  TONG YEE

Welch schönes Thema doch Effekte und Amps sind, nicht wahr? Seit den ersten Bodentretern Mitte des vergangenen Jahrhunderts faszinieren sich fast alle Gitarrist:innen für die Boxes of Goodness. Seit der Einführung der Digitaltechnik in die Effektgerätbranche werden die Kisten heiß diskutiert. Gerade die Modeling-Technik und später das Capturing/Profiling lösen immer wieder große und lange Diskussionen in den Online-Portalen (oder am heimischen Gitarren-Stammtisch) aus.

"Upgrade" is more than a 7-letter word. It embodies the continuation and evolvement beneath
the surface, and embraces revolution and creativity outside the box.
It’s what Ampero II Stomp does. Throughout years of grinding to establish its core technologies
from empirical practice, Hotone team proudly presents this soul partner for your
sophisticated taste in the sound of the music.

HOTONE

Review by Preshan John, audiotechnology.com

Review by Simon S, amazona.de

Demo by Andetons Music Co

Demo by Sonic Drive Studio 

Ampero II Stomp

daniel lee

Der Pentatone Equalizer ist eine eigenständige Version des 5-Band-Equalizer-Teils im Ibanez Pentatone Preamp. Mit einem kontinuierlich veränderbaren Q-Regler für jedes Band, der eine größere Vielfalt an Klangkreationen ermöglicht, bietet er noch präzisere Klanggestaltungsmöglichkeiten. Darüber hinaus sorgt die ±9V Stromversorgungstechnik für eine hohe Headroom. Damit eignet sich der parametrische Equalizer nicht nur für E-Gitarren, sondern auch für Signalquellen mit höherem Pegel wie E-Bässe und Keyboards.

The Pentatone Equalizer is a standalone version of the 5-band equalizer section in the Ibanez Pentatone Preamp. Adding a continuously variable Q control on each band, which allows for a wider variety of sound creation, enables even more detailed sound creation. Furthermore, the ±9V power supply circuitry provides a wide headroom. That makes the parametric equalizer suitable for not only electric guitars but also higher-level output signal equipment such as electric bass guitars and keyboards.

Ibanez

Review by sevenstring.org

Review by The Gear Page

Pentatone PTEQ

QuickMount Type J

Pedal-Montageplatte für mittelgroße Strymon-Pedale

Pedal Mounting Plate For Medium Size Strymon Pedals

David Graves

The Cali76 Bass Compressor is a studio-grade compressor pedal inspired by the world-famous Urei® 1176® studio compressor, heard on many of the greatest studio recordings since the 1960s. The Cali76 Bass Compressor uses uncompromising all-analogue circuitry to make these distinctive, ultra-fast FET compression tones available to the modern guitarist.

The latest in a long lineage of Cali76 compressors, the Cali76 Bass Compressor features a full set of studio-style controls, a DRY knob for parallel compression and an improved sidechain that matches the response of our sought-after “large format” Cali76 – the pedal that put Origin Effects on the map back in 2012.

With a 10-LED gain reduction meter, a pedalboard friendly enclosure and massive headroom thanks to internally increased voltage, the Cali76 Bass Compressor marks the culmination of over a decade of experience making the world’s finest compressor pedals.

Origin Effects

Demo by  BassTheWorld.com

Review by Compressor Pedal Reviews

Review by reddit /basspedals

Review by Gearnews

Review by AMAZONA

Manual download

Cali76 Bass Compressor (Classic)

Franko Teston

TONEX ONE integriert die revolutionäre AI Machine Modeling-Technologie in Pedalboards jeder Größe, sodass Sie auf mehr Arten als je zuvor mit den gefragtesten Sounds der Welt spielen können. Es macht buchstäblich unbegrenzte Töne für jedermann zugänglich.

Das ultrakompakte und leistungsstarke TONEX ONE speichert bis zu 20 hyperrealistisch modellierte Verstärker, Boxen und Pedale aus einer praktisch unbegrenzten Quelle, sodass Sie es überall in Ihrem Rig hinzufügen können. Mit der mitgelieferten TONEX-Software können Sie sogar Modelle Ihrer eigenen erfassten Ausrüstung hochladen. Platzieren Sie mühelos mehrere Einheiten auf Ihrem Board für wirklich unbegrenzte Klangmöglichkeiten.

TONEX ONE puts IK’s revolutionary AI Machine Modeling technology on any size pedalboard, enabling you to perform with the world’s most sought-after tones in more ways than ever before. It truly makes unlimited tone accessible to all.

Ultra-compact and powerful, TONEX ONE stores up to 20 hyper-realistic modeled amps, cabs and stomps from a nearly infinite supply, so you can add it anywhere in your rig. You can even load models of your own gear captured with the included TONEX software. Effortlessly fit multiple units on your board for truly limitless tone possibilities.

IK Multimedia

Review by delamar

Review by Audiofanzine

Demo by Andertons Music Co

Demo by ikmultimedia

ToneX One

Dual Vacuum Tube Preamp, Direct Box, and DC Power Supply

NOBLE AMPLIFIER COMPANY

Demo by Noble Amplifier Company 

Noble Preamp DI

Introducing the B2 FOUR Amp and Effects Emulator, powered with Zoom’s Multi-Layer IR technology and 6 iconic DI models. Now you can craft the perfect low-end tone

ZOOM

Demo by BassTheWorld.com

Bass Bonedo

Review by MusicStoreTV

B2 FOUR

xyra jones

Enter the new Fuel Tank Chameleon, the most versatile power supply T-Rex has ever produced. Built for players with a large number of diverse pedals, Fuel Tank Chameleon offers all the advantages of our other Fuel Tank power supplies, plus an unprecedented 4 separate voltage options.

T-Rex

Review by Adam Perlmutter, premierguitar.com

Review by Thomas Dill, bonedo.de

Demo by A Mediocre Guitarist

Fuel Tank Chameleon

Roger Thompson

Portable MIDI foot controller pedal is small and exquisite, with easy-to-use 4 foot switches.
Wireless MIDI pedal with intelligent APP(CubeSuite) control, easy to operate, convenient to use.
Bulit in 300mAh rechargeable lithium battery, charging for 2.5 hours, can be used for 12 hours.
The display screen can directly feedback the commands you issued, intuitive and clear.
Compatible with Wins, iOS, Android and other platforms.

M-VAVE

Demo by The Pedal Picassos

Demo by Ehrosmith TV

Chocolate

ISO Power Block V6 IEC

Für 5-10 FX-Pedale, 1 MOD-Slot - **442 x 236 mm / 17.40" x 9.29"** - erhältlich mit Gig Bag oder Flight Case

For 5 - 10 FX pedals, 1 MOD slot - **442 x 236 mm / 17.40" x 9.29"** - available with Gig Bag or Flight Case

Nikki Stixx

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 2 V2 wurde als Patchbay speziell für MIDI-basierte Setups, Verstärker und Geräte sowie eine USB-Verbindung zwischen Pedalboard und Computer oder Soundkarte entwickelt. Mit vier TRS-Through-Verbindungen lässt sich das MOD 2 V2 perfekt in True Stereo Setups von Keyboards oder Synthesizern integrieren oder als zentraler Zugang und Ausgang des Boards nutzen. Alternativ lassen sich Effektpedale im Front End und im Effekt-Loop des Verstärkers postieren (4-Kabel Methode).
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 4 x 6,3 mm TRS thru
- 2 x 5-pin DIN MIDI thru
- 1 x USB Type A thru
- 1 x DC 2,1 x 5,5 mm Hohlstecker thru
- 1 x AC IEC thru (männlich vorne / weiblich hinten)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 420 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 2 V2 is a pass-thru box especially designed for MIDI-controlled amplifiers and devices, USB connections to a computer, or a sound card. The 4x TRS thru connections will also work great for true stereo setups with keyboards or synthesizers. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 4 x 6,3 mm / ¼" TRS thru
- 2 x 5-pin DIN MIDI thru
- 1 x USB Type A thru
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 420 g / 0.93 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS, MIDI & USB Patchbay

Mission Control

XSW-D von Sennheiser