charlie day

Thunderbird 

Das RockBoard MOD 4 - All-in-One Wireless System Receiver + Patchbay für Pedalboards bietet eine einfach zu realisierende, kabellose Verbindung zwischen deinem Instrument und deinem Pedalboard. Dabei nutzt es eine digitale Wireless Technologie, die eine beeindruckende Klangqualität, ein einfaches Setup und eine zuverlässige Nutzung für aktive Musiker garantiert. Das Wireless System arbeitet im 2,4 GHz ISM Band und kann so weltweit ohne Beschränkungen genutzt werden. Mit einem nutzbaren Frequenzbereich von 20 Hz - 20 kHz und nur 5 ms Latenz bleiben keine Wünsche offen. Die Patchbay-Sektion wurde entwickelt um Verbindungen und Anschlüsse des Pedalboards von der Unterseite nach außen zu führen, dir einen zentralen Zugangspunkt zu deinem Setup zur Verfügung zu stellen und um deine Kabelwege aufzuräumen und sortieren zu können. Die A, B, C und D TRS Buchsen sind als direkte, durchgängige Verbindungen von der Vorderseite des MOD 4 zu den entsprechenden Buchsen auf der Rückseite verkabelt. Damit kannst du deine Effekt-Kette so einrichten, dass du bei der Vorbereitung auf den Gig lediglich Kabel an der Vorderseite des Boards einstecken musst, anstatt unter dem Board zu hantieren.
- Wireless System Receiver + Patchbay für Pedalboards, inkl. Wireless Transmitter
- 2,4 GHz ISM Band für weltweite Nutzung
- 30 m durchschnittliche Reichweite (ohne Hindernisse)
- 24 bit / 48 kHz unkomprimierte digitale Signalübertragung
- 20 Hz - 20 kHz Frequenzbereich
- 5 ms Latenz
- 103 dB Dynamikbereich
- 85 dBm HF-Empfindlichkeit
- 0.2% Verzerrung (THD)
- 4 wählbare Kanäle
- passend für MOD Slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe anderer Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 4x 6,3 mm Stereo-Klinke Thru (TRS)
- 1x 6,3 mm Mono-Klinke Receiver Audio Ausgang (TS)
- 1x DC 2,1 x 5,5 mm Hohlstecker Thru
- 1x AC IEC Thru
- 1x USB Type A Charge Ausgang
- Stromversorgung via optionalem 9V DC Netzteil, 2.1 x 5.5 mm Hohlstecker, Polarität (-) innen
- Batteriebetrieb nicht unterstützt
- Stromaufnahme 500 mA
- passiver Betrieb möglich (nur Patchbay, ohne Wireless System)
- Abmessungen mit Frontplatte (B x T x H): 175 x 85 x 47 mm
- Abmessungen ohne Frontplatte (B x T x H): 160 x 85 x 33 mm
- Gewicht 500 g
- Wireless Transmitter, zwei Antennen, ein USB Kabel, Montageschrauben und Muttern im Lieferumfang enthalten

The RockBoard MOD 4 - All-in-One Wireless System Receiver + Patchbay for Pedalboards offers an easy-to-use wireless connection between your instrument and your pedalboard, featuring digital wireless technology that delivers incredible audio quality, a simple setup procedure, and reliable use for any gigging musician. The wireless system works in the 2.4 GHz ISM band for unlimited worldwide use and offers a full 20 Hz - 20 kHz frequency range with only 5 ms of latency. The patchbay module is designed to route connections from underneath your pedalboard to its front, giving you a central access point and tidying up your connections. The A, B, C, and D TRS sockets are wiring thru-connections from the front of MOD 4 to the corresponding sockets on the back. This allows you to connect your pedals permanently underneath the board, so you only have to connect cables to and from the front of the board, instead of having to route underneath it when setting it up for a gig.
- wireless system receiver + patchbay for pedalboards, incl. wireless transmitter
- compatible with guitar wireless system
- 2.4 GHz ISM band for worldwide use
- 30 m / 100 ft. approx. range (without obstacles)
- 24-bit / 48 kHz uncompressed digital transmission
- 20 Hz - 20 kHz frequency range
- 5 ms latency
- 103 dB dynamic range
- 85 dBm RF sensitivity
- 0.2% total harmonic distortion
- 4 selectable channels
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- detachable front plate for mounting on top or underneath pedalboards
- 4x 6.3 mm / 1/4" stereo thru (TRS)
- 1x 6.3 mm / 1/4" mono receiver audio output (TS)
- 1x DC 2.1 x 5.5 mm barrel thru
- 1x AC IEC thru
- 1x USB Type A charge output
- power supply via optional 9V DC power adapter, 2.1 x 5.5 mm barrel plug, polarity (-) center
- battery operation not supported
- current draw 500 mA
- passive operation possible (patchbay only, without wireless system)
- dimensions with front plate (W x D x H) 175 x 85 x 47 mm / 6 57/64" x 3 11/32" x 1 27/32" 
- dimensions without front plate (W x D x H) 160 x 85 x 33 mm / 6 19/64" x 3 11/32" x 1 19/64"
- weight 500 g / 1.1 lbs
- incl. wireless transmitter, two antennas, USB charging cable, mounting screws, and counter nuts

2.4 GHz Guitar Wireless Receiver, Transmitter + TRS Patchbay

New Pedal Board

ABM600

Tuwi Yuwi

The Lucydreamer is a Dry / Wet overdrive created with today’s bass masters’ needs and wants in mind.

It packs the following functions / features:

Dry / Wet Mix control

High-gain-stage footswitch which doesn’t affect the dry signal’s level

Internal trimmer to set the high-gain stage’s output level

Its overdrive circuit can track every little nuance of your playing with a wide gain-stage spectrum, ranging from highly dynamic tube-amp-like break-up, all the way to full- bodied high-gain saturation!

Owing its clipping merits to our “secret” chip, the Lucydreamer fluently tackles all the traditional tasks of an overdrive pedal and at the same time invites you to discover new ways of bonding with your bass lines!

Widen your palette of sounds, minimize pedalboard real estate and elevate your tone with the Lucydreamer!

Jam Pedals

Review by reddit /basspedals

Product Page

Manual

Demo by Zachary Rizer

Demo by Patrick Hunter

Demo by Nate Navarro

Demo by BassTheWorld.com

LucyDreamer Bass

PedalSafe Type B3

QuickMount Type B1

Pedal-Montageplatte für FRIEDMAN, KEELEY Halo, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD, Jupiter V2 und Mooer GL 100 Pedale

Pedal Mounting Plate for FRIEDMAN, KEELEY Halo, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD, Jupiter V2 and Mooer GL 100 pedals

Schutzabdeckung & RockBoard-Montageplatte für WALRUS MAKKO D1 Pedale

Protective Cover & RockBoard Mounting Plate For WALRUS MAKKO D1 pedals

Schutzabdeckung & universelle Montageplatte für WALRUS MAKKO D1 Pedale

Protective Cover & Universal Mounting Plate For WALRUS MAKKO D1 pedals

Tester

JAM pedals’ unabashed distortion monster. We pulled out all the stops to make sure the Rattler will get you all the amazing tones of great early 80s ProCo RAT® distortion boxes and put in the time and R&D to make it more responsive to your playing resulting in an open, dynamic, overdriven tube-amp feel!

Its symmetrical clipping circuit and of course the legendary LM308 chip, the featured star of this design, are the main ingredients of a great recipe resulting in the Rattler shining through any rig, whether modern or vintage.

Enjoy fat and creamy distortion courtesy of the devious snake!

Demo by Chris Kollias

Demo by BassTheWorld

Rattler Bass

Christian Wistl

Bass is the bedrock of your band, and the Two Notes ReVolt Bass's all-analog signal path, complete with a 12AX7 preamp tube — run at a healthy 200V — ensures a stand-out sound in any application. The ReVolt Bass's three channels deliver the full gamut of tones, from high-headroom cleans to old-school dirt to modern drive. You also get an integrated Dry/Wet blend for extra tone-shaping power. An analog speaker simulation ensures a polished, miked-cab sound, both onstage and in the studio. Integrating the ReVolt Bass with the rest of your rig is a cinch, thanks to a 4-cable mode, an FX loop, and MIDI I/O. This bass preamp pedal also includes a collection of ten DynIRs for situations where you need more DI flexibility. Bassists searching for a robust, made-to-move solution for their pedalboards and fly rigs will get tons of mileage out of the Two Notes ReVolt Bass.

Two Notes Audio Engineering

Review by Sound on Sound

Review by bonedo

Demo by Sweetwater

Official Product Video

ReVolt Bass

The upgraded version of the Vintage Deluxe features the warm, tube-like tones of the Microtubes Vintage and adds a 4-band active EQ, Low and High mid frequency switch, parallel output and balanced line driver. It delivers the natural dynamic response and organic compression of classic tube amps and tape machines, fitting four decades of legendary tones into a package that will fit in your gig bag.

darkglass 

Demo by Musicmaker

Review by reddit /Bass

Manual Pages

Vintage deluxe V3

Featuring the largest tuning display Peterson Tuners has ever incorporated into one of their pedal tuners, the StroboStomp HD boasts a high-definition, LCD screen that incorporates a variable color LED backlight. The user-selectable colors can be used to personalize the tuner or to increase display viewing quality in different levels of ambient lighting depending on the usage environment. The vibrant screen colors can also be assigned to stock or user presets to significantly reduce menu navigation time and increase on-stage tuning confidence at the gig.

Peterson

Review by Gitarre & Bass

Demo by The Time Preservation Society

Demo by EytschPi42

Demo by TalkingBass

Review by The Gear PAge

Review by TDPRI

Review by reddit /guitarpedals

StroboStomp HD

Danielo Olivera

Kontrolliere ein Volumen und FX-Parameter ohne dein Pedalboard mit einem weiteren großen Pedal noch voller zu packen. Platzsparen muss nicht heißen auf Funktionalität zu verzichten – das DVP Volume (X) Pedal macht alles das, was sein großer Bruder das DVP3 kann – bei halber Größe und genauso robust gebaut im leichten Alu-Gehäuse. Wie das DVP3 hat es auch die rutschfeste Pedaloberfläche und den patentierten Low-Friction-Band-Drive, der für einen sanften und gleichmäßigen Regelweg und zuverlässige Performance sorgt. Für maximalen Komfort ist die Leichtgängigkeit des Pedals vollkommen einstellbar.

Der AUX Ausgang vereint Tuner und Expression Funktion in einer Buchse, die per internem Schalter festgelegt werden kann. Über interne Trim-Potis kann das Minimum-Volumen des Pedals eingestellt werden und wenn du willst, kannst du auch die Funktionsrichtung umkehren – ein weiterer interner Schalter macht’s möglich.

Control your volume and FX parameters without crowding your pedalboard. Saving space doesn’t mean skimping on durability or functionality—the DVP4 Mini Volume (X) Pedal does everything that the larger DVP3 does at half the size, and it’s just as solidly built with a lightweight aluminum chassis, aggressive non-slip tread, and our patented Low Friction Band-Drive for a smooth range of motion and consistent, reliable performance. For maximum comfort and precision, the DVP4’s rocker tension is fully adjustable. 

The AUX output combines tuner and expression functionality into one jack that can be toggled with a switch inside the pedal. When using the DVP4 as an expression pedal, you can use an internal pot to set the minimum level of the parameter you’re controlling with the rocker. If you want to reverse the function of the heel-down and toe-down positions, the DVP4 has another internal switch that allows you to do so.

Dunlop

Dunlop Volume (X) Mini Pedal Review Premier Guitar EN

VOLUME (X) MINI (DVP4)

ch ray

Wenn Sie mehrere Gitarren mit unterschiedlichen Pegeln verwenden, können Sie mit TheGigRig Three2One V2 mühelos zwischen ihnen wechseln und die integrierten Vorverstärker verwenden, um die Pegel auszugleichen. Außerdem können Sie das Signal von der verwendeten Gitarre an den Tuner-Ausgang senden, um es auf der Bühne geräuschlos zu stimmen.

Der GigRig Three2One-Gitarrenwähler verfügt über drei Eingänge. Sie können jetzt problemlos zwischen 1-3 Gitarren oder sogar Line-Pegel-Eingängen wie Keyboards oder Drumcomputern wechseln!

If you use multiple guitars with varying levels, TheGigRig Three2One V2 allows you to switch effortlessly between them and use the built in preamps to balance the levels as well as sending the signal from whatever guitar you're using to the Tuner Out for silent on-stage tuning.

The GigRig Three2One guitar selector features three inputs. You can now switch easily between 1-3 guitars or even line level inputs such as a keyboards or drum machines! 

The GigRig

Review by musicradar

Review by The Gear Page

Three2One V2

Das TC Electronic Sentry nimmt sich als Noisegate-Pedal den Problemen an, von denen vor allem Singlecoil-Spieler sowie Hard- und Heavy-Gitarristen ein Lied singen können. Die Rede ist natürlich von unerwünschten Nebengeräuschen, die gern in Form von Einstreuungen oder stärkerem Rauschen auftreten und uns das Leben schwer machen.

The TC Electronic Sentry is a noisegate pedal that addresses the problems that single-coil players and hard and heavy guitarists in particular can tell you a thing or two about. Of course, we're talking about unwanted noise, which often occurs in the form of interference or stronger noise and makes life difficult for us.

TC Electronic

Review by Bonedo 

Demo by Science of Loud

Sentry Noise Gate

QuickMount Type G 

Pedal-Montageplatte für Standard TC Electronic Pedale

Pedal Mounting Plate For Standard TC Electronic Pedals

Lee-Ping Jiang

And the party does not stop …Ever!!!
Essential to keeping the groove moving is bass. Lots and lots of bass.
Can’t have too much, just not possible.
And from this universal truth the Octatron was born.
Bringing one million years of cosmic funk into a compact pedal capable of creating the eternal groove.
All analog, all the time.
From deep dub to smooth grooves, the Octatron is the magical box for all things bass.

Seamoon FX

Review by Bass Gear Mag

Demo by Premier Guitar

Demo by the wetter bass

Octatron

QuickMount Type A

Pedal-Montageplatte für Standard-Einzelpedale

Pedal Mounting Plate For Standard Single Pedals

Der MXR Bass Chorus Deluxe basiert auf reiner analoger Bucket-Brigade-Technologie, die schimmernde, flüssige Chorus- und rauschende, metallische Flanger-Effekte liefert und dabei den Punch und das Fundament deines Low Ends bewahrt.

Der Bass Chorus Deluxe verfügt über Flanger- und X-Over-Tasten auf der Oberseite mit LED-Statusanzeigen. Im X-Over-Modus wird die Modulation in den tiefen Frequenzen auf 100 Hz abgesenkt - perfekt für das Spielen von Akkorden, Melodien und Fills in den oberen Registern, während die tiefen Frequenzen in der richtigen Stimmung bleiben. Mit den Reglern für Bass und Treble können Sie die Tiefen und Höhen absenken oder anheben und den Klangcharakter des Effekts gestalten. Für einen breiten Stereosound können Sie über einen internen Schalter den TRS (Tip-Ring-Sleeve) Stereo Hardwire Bypass Mode wählen. In diesem Modus können Sie ein TRS-auf-TS-(Tip-Sleeve)-Y-Verteilerkabel verwenden, um das Effektsignal an zwei verschiedene Verstärker zu senden, so dass die Modulation von links nach rechts wandern kann.

The MXR Bass Chorus Deluxe is powered by pure analog bucket-brigade technology, serving up shimmering, liquid chorus and swooshing, metallic flanger effects while preserving the punch and fundamental of your low end.

The Bass Chorus Deluxe features top-mounted Flanger and X-Over buttons with LED status indicators. In X-Over Mode, modulation in low frequencies is decreased at 100Hz—perfect for playing upper register chords, melodies and fills while keeping the low end in tune. With Bass and Treble controls you can cut or boost lows and highs and shape the tonal character of the effect. For a wide stereo sound, select the TRS (tip-ring-sleeve) Stereo Hardwire Bypass Mode via an internal switch. In this mode, you can use a TRS to TS (tip-sleeve) Y-splitter cable to send the effect signal to two different amplifiers, allowing the modulation to move from left to right.

Review by Premier Guitar

Review by Basschat

Review by Talk Bass.com

Review by Bonedo

Demo by The Bass Channel

M83 Bass Chorus Deluxe

Dieses Pedal kombiniert den satten Klang des Harmonic Booster mit der Präzision einer Parallelkompression mit einstellbarem Frequenzbereich und bietet Ihnen unübertroffene Kontrolle. Mit einem 6-Band-EQ, einer Pegelreduzierungsanzeige und der Option, 7 benutzerdefinierte Impulsantworten über USB zu laden, bietet es ultimative Klangflexibilität für Bassisten aller Genres. Pur, kraftvoll und präzise – Ihr sauberer Ton, perfektioniert.

Combining the rich tone of the Harmonic Booster with the precision of an adjustable frequency range parallel compression, this pedal gives you unmatched control. With a 6-band EQ, gain reduction meter, and the option to load 7 custom Impulse Responses via USB, it delivers ultimate tonal flexibility for bass players of any genre. Pure, powerful, and precise—your clean tone, perfected.

Darkglass Electronics

Demo by IvanBassist

Review by No Treble

Review by sinusoidal music

Review by Bass Musician Mag

Review by gearnews.de

Manual Page

Luminal Booster Ultra

RockBoard

ISO Power Block V12 IEC

Für 9-15 FX-Pedale, 1 MOD-Slot - **622 x 330 mm / 24.49" x 12.99"** - erhältlich mit Gig Bag oder Flight Case

For 9 - 15 FX pedals, 1 MOD slot - **622 x 330 mm / 24.49" x 12.99"** - available with Gig Bag or Flight Case

Timothy Brown

This is my current bass guitar rig that I use to play modern worship and 90's alternative rock.  The board is built around the HX Stomp and the BassRig Super Vintage.  This is very much a work in progress and will probably change in the next few months.

Signal Path - Bass Guitar to the Rockboard Mini Mod TRS where the signal is split into two.  Path A goes straight to the Canvas Tuner, Cali 67 bass comp, and the HX Stomp.  Path A also contains an FX loop that goes to the ToneX One and back to the Left FX Return.  The Tonex is running driven version of the DG Vintage Microtubes that is controlled by a L FX Loop block via FS2 to add some extra dirt when called for.  

Path B is my approximation of the EHX Bass Microsynth.  Path B's signal comes from the micro mod and goes to the Seamoon Octaron and the Big Muff pi 2 (Bass) and terminates at the right FX return on the HX stomp.  Path B is instered into the signal chain by the R FX Return (controlled by FS 3).   

Both paths are summed to mono and then sent out to the BassRig Super Vintage which acts as an Ampeg SVT bass amplifier using the 8x10 "fridge" cabinet. 

Snapshot 1 is my clean path using the Cali 76, HX Stomp (no FX returns) to the Bassrig Super vintage.  

Snapshot 2 is my Overdrive option.  The signal chain inside the HX Stomp is split internally so that all FX are on path B, routed through either the King of Tone or the Timmy depending on what I'm looking for that set. The OD blocks are controlled by FS1.  The L FX Return with the Tonex signal is also on path B.  

Snapshot 3 deactivates everything except the R FX return on path B.  The signal is mixed about 60% wet 40% Dry.  This block is allso controlled by FS 3 which allows me to turn the "SynthMicro" off if we need a sudden drop in dynamics without going back to Snapshot 1.  

FX4 on the Pedalnetics Front Aux box cycles through the snapshots, while FS5 advances to the next preset.  All snapshots have been gainstaged and leveled to betweeen -18 dBfs (SS1) and -12 dBfs (SS3) so the sound engineers don't hate me.  

"The Beast"

Workhorse

Wall of Sound 2.0

Franko Teston

TONEX ONE integriert die revolutionäre AI Machine Modeling-Technologie in Pedalboards jeder Größe, sodass Sie auf mehr Arten als je zuvor mit den gefragtesten Sounds der Welt spielen können. Es macht buchstäblich unbegrenzte Töne für jedermann zugänglich.

Das ultrakompakte und leistungsstarke TONEX ONE speichert bis zu 20 hyperrealistisch modellierte Verstärker, Boxen und Pedale aus einer praktisch unbegrenzten Quelle, sodass Sie es überall in Ihrem Rig hinzufügen können. Mit der mitgelieferten TONEX-Software können Sie sogar Modelle Ihrer eigenen erfassten Ausrüstung hochladen. Platzieren Sie mühelos mehrere Einheiten auf Ihrem Board für wirklich unbegrenzte Klangmöglichkeiten.

TONEX ONE puts IK’s revolutionary AI Machine Modeling technology on any size pedalboard, enabling you to perform with the world’s most sought-after tones in more ways than ever before. It truly makes unlimited tone accessible to all.

Ultra-compact and powerful, TONEX ONE stores up to 20 hyper-realistic modeled amps, cabs and stomps from a nearly infinite supply, so you can add it anywhere in your rig. You can even load models of your own gear captured with the included TONEX software. Effortlessly fit multiple units on your board for truly limitless tone possibilities.

IK Multimedia

Review by delamar

Review by Audiofanzine

Demo by Andertons Music Co

Demo by ikmultimedia

Demo by Bernd Kiltz - Gitarrenvideos

ToneX One

PedalSafe Type K3

QuickMount Type K

Pedal-Montageplatte für Mooer Micro Series Pedale und ToneX One

Pedal Mounting Plate For Mooer Micro Series Pedals and ToneX One

Schutzabdeckung & RockBoard-Montageplatte für das IK Multimedia® ToneX One Pedal

Protective Cover & RockBoard Mounting Plate for the IK Multimedia® ToneX One pedal

Schutzabdeckung & universelle Montageplatte für das IK Multimedia® ToneX One Pedal

Protective Cover & Universal Mounting Plate for the IK Multimedia® ToneX One pedal

David Graves

Der Bass Big Muff 2 bietet den charakteristischen Midrange-Grind des Originals mit dem flexiblen EQ und dem nahezu endlosen Sustain, das man von jedem Big Muff erwartet. Die Bass-Version ergänzt die Regler VOL, SUSTAIN und TONE um einen BLEND-Regler und einen BASS BOOST-Schalter. Der BLEND-Regler mischt das trockene und das Fuzz-Signal, um die perfekte Balance der Verzerrung einzustellen, ohne an Klarheit und grundlegenden Tiefen zu verlieren. Betätigen Sie den BASS BOOST-Schalter, um einen noch größeren Effekt zu erzielen, insbesondere wenn Sie den TONE-Regler auf höhere,  höherfrequente Einstellungen stellen. Mit diesen zusätzlichen Reglern kann der Bassist den besten Fuzz-Sound einstellen, ohne dabei auf die Fähigkeit verzichten zu müssen, Wände zum Wackeln und Hallen zum Beben zu bringen.

The Bass Big Muff 2 features the signature midrange grind of the original with the flexible EQ and virtually endless sustain expected in any Big Muff. The Bass version adds a BLEND knob and BASS BOOST switch to the VOL, SUSTAIN, TONE control set. The BLEND knob mixes the dry and fuzz signals to set the perfect balance of distortion without losing clarity and foundational low-end. Flip the BASS BOOST switch to make an even bigger impact, especially while running the TONE knob at higher,  more trebly settings. These added controls let the bass player dial in the best fuzz tone without sacrificing their ability to shake walls and rattle halls.

Electro-Harmonix

Announcement by Premier Guitar

Review by Bass Magazine

Bass Big Muff Pi 2

Nicolas Wilfer

Arguably the most important pedal on your board, the Canvas Tuner ensures that your instrument is ready to sound its best with the perfect meld of versatility and precision. The Canvas Tuner ensures that you have the most accurate brush to paint your sonic picture.

Walrus Audio

Video Manual

Official Product Video 

Canvas Tuner

daniel lee

Der Cali76 Bass Compressor ist ein Kompressor-Pedal in Studioqualität, das vom weltberühmten Urei 1176 Studiokompressor inspiriert ist, der seit den 1960er Jahren auf vielen der größten Studioaufnahmen zu hören ist. Der Cali76 Bass Compressor nutzt eine kompromisslose, vollständig analoge Schaltung, um dem modernen Gitarristen diese unverwechselbaren, ultraschnellen FET-Kompressionsklänge zugänglich zu machen. 

Als neuestes Modell in einer langen Reihe von Cali76-Kompressoren verfügt der Cali76 Bass Compressor über einen vollständigen Satz an Reglern im Studio-Stil, einen DRY-Regler für Parallelkompression und einen verbesserten Sidechain, der der Ansprache unseres begehrten „Large Format“ Cali76 entspricht – dem Pedal, das Origin Effects 2012 bekannt gemacht hat.

Übersetzt mit DeepL.com (kostenlose Version)

The Cali76 Bass Compressor is a studio-grade compressor pedal inspired by the world-famous Urei 1176 studio compressor, heard on many of the greatest studio recordings since the 1960s. The Cali76 Bass Compressor uses uncompromising all-analogue circuitry to make these distinctive, ultra-fast FET compression tones available to the modern guitarist. 

The latest in a long lineage of Cali76 compressors, the Cali76 Bass Compressor features a full set of studio-style controls, a DRY knob for parallel compression and an improved sidechain that matches the response of our sought-after “large format” Cali76 – the pedal that put Origin Effects on the map back in 2012.

Origin Effects

Review by Compressor Pedal Reviews

Cali76 Bass Compressor (Super Vintage Blue)

Sam McAinch

The BASSRIG Super Vintage is, quite simply, a complete vintage bass amp in a pedal. Based on the iconic Ampeg® SVT®, we have used all-analogue circuitry to recreate a complete valve amp-style signal path, along with an all-analogue cabinet simulator, giving you all the warmth, feel and drive of this classic bass rig in one small box.
When the SVT® arrived on the scene in 1969, it rewrote the rulebook for purpose-built bass amplification. Thanks to its enormous power, deep bass, growling overdrive and purposeful control set, this tower of tone has remained the amp of choice for the most discerning bassists on the world’s biggest stages.
With XLR and ¼” outputs, the BASSRIG Super Vintage will fit seamlessly into any signal chain, no matter how simple or complex, and our powerful Amp Out EQ tailors your sound to work with any amp, meaning you never have to compromise on tone.

Demo by Origin Effects with Ian Allison

BassRig Super Vintage

Andrea De Blasio

Sweetwater exclusive.
Multi-effect processor with the helix sound Over 300 effects and models from the Helix, M series and other Line6 products 6 Simultaneously usable amplifiers, boxes and effect blocks - including looper and IR loading Coloured LC display Integrated audio interface 3 Footswitches with colour-coded LED rings MIDI In and Out Expression pedal connection Input: L / Mono and Right Output: L / Mono and Right USB MIDI In and Out / Thru Headphone output FX loop Aux in Dimensions: 17.8 x 12.6 x 6.6 cm Weight: Approximatey 800 g Connection for 9 V DC 3 A power supply Includes power supply

LINE 6

Demo by Guitar Bonedo

HX Stomp - Cosmic Gray

PedalSafe Type L6

QuickMount Type L6

Pedal-Montageplatte für LINE6 HX Stomp Pedale

Pedal Mounting Plate for LINE6 HX Stomp pedals

Schutzabdeckung & RockBoard-Montageplatte für LINE6 HX Stomp Pedale

Protective Cover & RockBoard Mounting Plate For LINE6 HX Stomp pedals

Schutzabdeckung & universelle Montageplatte für LINE6 HX Stomp Pedale

Protective Cover & Universal Mounting Plate For LINE6 HX Stomp pedals

Looking for a thin switch to sit in front of your HX Stomp to give you access to your FS4/FS5 functions? Look no further than our FrontAux! 2 switches aligned center of the existing HX Stomp switches, in a thin narrow-bodied switch, set at an angle for easy access/less accidental hits!

Pedalnetics

HX Stomp FrontAux

Das Mini Mounting MOD TRS ermöglicht einen bequemen Zugang zur Signalversorgung der Pedale auf dem Board. Es passt perfekt in die Befestigungslöcher des RockBoard® LED-Lights und ist eine vielseitig einsetzbare, saubere Montage-Lösung auf allen Pedalboards der RockBoard® Serie. Der zentrale Zugang zur Signalversorgung erfolgt durch eine TRS 6,3 mm Stereoklinkenbuchse. Da es sich bei den Klinkenbuchsen um Durchgangsbuchsen handelt, ist auch in umgekehrter Richtung eine Weiterleitung von Signalen an externe Pedale, wie z.B. Wah, möglich. Auch sind, durch die Verwendung von TRS-Stereo-Buchsen, „Send/Return“-Anwendungen (A- = Tip und B- = Ring) einfach realisierbar.

The Mini Mounting MOD TRS provides convenient access to the signal supply of the pedals on the board. It fits perfectly into the RockBoard® LED Light mounting holes and is a versatile, clean mounting solution on all RockBoard® series pedalboards. Central access to the signal supply is provided by a TRS 6.3 mm stereo jack socket. Since the Mini Mounting MOD TRS uses through-connections between the inner and outer jacks, it is also possible to pass signals in the reverse direction to external pedals, such as Wah. Also, by using TRS stereo jacks, „send/return“ applications (A- = tip and B- = ring) are easy to realize.

Yoshi van Vroonhoven

MiniMod TRS

Canvas Power 5

Canvas Power HP

Für 5-9 FX-Pedale - **622 x 142 mm / 24.49" x 5.59"** - erhältlich mit Gig Bag oder Flight Case

For 5 - 9 FX pedals - **622 x 142 mm / 24.49" x 5.59"** - available with Gig Bag or Flight Case

Where has the Funk gone?

That bygone era of booty shaking, rump bumpin’ good time party music that was always right on time? The sound that always brought you up and never let you down?

Well, fear not!
Seamoon is proud to announce the glorious return of the mighty Seamoon Funk Machine! The effect pedal that launched countless multi-platinum hits.

Equally at home with guitar, bass and horns, the Seamoon Funk Machine provides a chromatic wonderland of envelope filter fun-with a few added surprises.

Review by Horn FX

Funk Machine

All encompassing, enveloping time and space.

The Skye Machine is the embodiment of all things ethereal.

Combining an all-analog circuit with three distinct chorus palettes, the Skye Machine is the first, last and only chorus you will ever need.

From smooth and subtle to warped and transforming, the Skye Machine is the beginning and end of your chorus journey.

Equally adept at handling bass, guitar, and keyboards, let your universal journey through the cosmos begin with the Skye Machine.

Syke Machine

Because bass players need love (and distortion) too!

For too long, bassists have had to suffer with half-baked guitar distortion pedals or one dimensional “modern” bass distortion pedals that offer tone akin to a lead pipe slamming into a steel girder.
But No More!!
Enter-The Seamoon Grind Machine.
Designed to deliver versatility, tone and responsiveness to the most demanding bassists.
Warm up a solid state amp or drive that tube stack to new levels of mayhem.