Thomas & Simone RhPf Electronics

Lenny, frontman of M.O.T.H.E.R. from Biel/Bienne, brings a sound that’s gritty, raw, and full of attitude. With punchy riffs and a voice to match, he builds his core tone by pushing his amp hard—no classic drive pedals needed. Instead, both EQs (BOSS GE-7 and MXR Ten Band) are used as powerful boosts, slamming the amp into that unmistakable, edge-of-breakup tube growl.

Central to his setup is the RhPf Electronics Tri-Hormonic Phalanx. Lenny sets the highs and lows for clean, focused boost, while the mids get dialed in for a crunchy, saturated bite. This lets him carve out punch and clarity, while the midrange cuts through with emotion and grit—never muddy, always bold.

Modulation and color come from the Orange Phaser, BOSS Harmonist, Multi Overtone, and Echoplex Delay, with the Hall of Fame 2 adding depth when needed. Power and routing are handled by the Truetone 1Spot Pro and Radial Catapult.

M.O.T.H.E.R.’s songs are all about storytelling with soul—sometimes chaotic, sometimes beautiful, always real. Lenny’s rig is built for that: flexible, dynamic, and ready to deliver every shade of feeling, from heartbreak to pure rock and roll joy.

M.O.T.H.E.R. - Lenny

Tester

BOSS

PS-6 Harmonist

PedalSafe Type E1

QuickMount Type E

Pedal-Montageplatte für Standard-Boss-Pedale

Pedal Mounting Plate For Standard Boss Pedals

Schutzabdeckung & RockBoard-Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & RockBoard Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Schutzabdeckung & universelle Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & Universal Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

MO-2 Multi Overtone

The Echoplex EP-3 tape echo unit is famous for its deliciously warm, organic modulation and sweet musical voice—a key component to some of the most iconic guitar tones from the '70s onward. The original EP-3 units, however, are expensive, temperamental, and larger than a VCR.

That's where the EP103 Echoplex Delay comes in. It's the size of a Phase 90, and it delivers the EP-3's legendary tones with a simple control interface and a hi-fi all-analog dry path. The Delay control sets the time between repeats—from 65ms to 750ms—the Sustain control sets the number of repeats, and the Volume control sets the output level of your repeats.

Dunlop

Product Page

Review by Gitarre & Bass

Review by bonedo

Review by Premierguitar

Manual

Demo by Guitarist

Official Product Video

EP103 Echoplex Delay

PedalSafe Type A1.1

QuickMount Type A

Pedal-Montageplatte für Standard-Einzelpedale

Pedal Mounting Plate For Standard Single Pedals

Schutzabdeckung & RockBoard-Montageplatte für MXR® Standardgröße und Dunlop® Echoplex Delay Pedale

Protective Cover & RockBoard Mounting Plate For MXR® standard size and Dunlop® Echoplex Delay pedals

Schutzabdeckung & universelle Montageplatte für MXR® Standardgröße und Dunlop® Echoplex Delay Pedale

Protective Cover & Universal Mounting Plate For MXR® standard size and Dunlop® Echoplex Delay pedals

Vincent  Raillard

TC ELECTRONIC ist ein Synonym für einige der bestklingenden Reverbs auf dem Markt - denken Sie an einen Song mit Hall, den Sie in den letzten 20 Jahren gehört haben, und die Wahrscheinlichkeit ist groß, dass er von uns stammt. Wir sprechen hier von Michael Jackson über Dire Straits bis hin zu Lady Gaga und zurück und allem, was dazwischen liegt. Wir haben die ikonischen Hallsounds, die du kennst und liebst, in einem kleinen Paket zusammengefasst, das einfach so wahnsinnig gut klingt, dass du es ausprobieren musst.

The original HALL OF FAME REVERB delivered some of the most-iconic reverb sounds of all time, but HALL OF FAME 2 REVERB extends that legacy of innovation dramatically. Essentially, HALL OF FAME 2 REVERB’s incredible MASH technology adds an expression pedal to a world-class reverb stompbox that not only responds to your touch and saves precious pedalboard space – but blends the celestial world of reverb with the ultimate in personal expression. Add a scintillating new Shimmer effect, and you've got a reverb pedal unlike any other – the awe-inspiring HALL OF FAME 2 REVERB!

The HALL OF FAME 2 REVERB features groundbreaking new technology that brings a wide range of creative expression to the party, controlled solely by how much pressure you apply to the depressed footswitch. Years in the making, and only available in select
TC ELECTRONIC products, this clever innovation elevates the common footswitch well above rather mundane duties, such as “On” and “Off”. More importantly – MASH elevates your performance to the next level.

TC Electronic

Product Video 

Demo by TC Electronic 

Demo by Prymaxe 

Demo by Mike Hermans 

Product Page 

Review by MIXDOWN 

Review by AMAZONA 

Hall of Fame 2

PedalSafe Type G

QuickMount Type G 

Pedal-Montageplatte für Standard TC Electronic Pedale

Pedal Mounting Plate For Standard TC Electronic Pedals

Schutzabdeckung & RockBoard Montageplatte für Standard TC Electronic Pedale

Protective Cover & RockBoard Mounting Plate For Standard TC Electronic Pedals

Schutzabdeckung & universelle Montageplatte für Standard TC Electronic Pedale

Protective Cover & Universal Mounting Plate For Standard TC Electronic Pedals

Hartwig Rohde

IT LITERALLY HAS ONE JOB

When you have a specific job that needs doing, the solution is obvious: you hire a specialist. And when you want to add a classic phaser effect to your sound, it’s the same deal: you want a pedal that does exactly that, and only that. No muss, no fuss, no superfluous bells and whistles — and, crucially, zero intrusions on that sweet psychedelic swirl.

Orange

Demo by GUITARGUITAR

Review by AMAZONA

Review by Guitar World

Review by Guitar.com

Manual Page

Vintage Phaser

Filippo Rimondi

Truetone

Visual Sound 1 Spot Pro CS12

Luciano Saracino

Das Catapult Mini System funktioniert wie ein typisches analoges Vierkanal-Audio-Snake; es ermöglicht die Übertragung von Mikrofon- oder Line-Pegel-Signalen von einem Ort zum anderen ohne Signalverlust, Rauschen oder Interferenzen und ohne dass eine digitale Audioumwandlung erforderlich ist. Das Besondere am Catapult-System ist, dass es Cat 5-Ethernet-Kabel verwendet, die weithin verfügbar, leicht und kostengünstig sind. Schließen Sie einfach ein abgeschirmtes Cat 5-Kabel zwischen zwei beliebigen Catapult-Modulen an, und die Module nutzen die analogen Leiter im Kabel, um vier symmetrische Audioleitungen an ein beliebiges Ziel zu liefern.

The Catapult Mini System works like a typical four-channel analog audio snake; they allow you to send mic or line-level signals from one location to another without signal loss, noise, or interference, and without any digital audio conversion needed. What makes the Catapult system unique is that it utilizes Cat 5 Ethernet cable, which is widely available, lightweight, and economical. Simply connect a shielded Cat 5 cable between any two Catapult modules and they will use the analog conductors in the cable to deliver four balanced audio lines to any destination.

Radial Engineering

Demo by Scott Uhl

Demo by DaleProAudio

Review by Gearspace

Review by Church Production

Catapult Mini TX

Ein paralleler 3-Band-Enhancer mit unabhängigem Gain- und Level-Setup für Bässe, Mitten und Höhen. Der Tri-Hormonic Phalanx formt jede Frequenz separat – mit Klarheit und Kontrolle. Verleihe deinem Sound Druck im Bass, Präsenz in den Mitten oder Glanz in den Höhen, ohne Überschneidungen. Für transparente Klangformung oder gezielte Sättigung – immer phasenstabil, immer musikalisch.

A parallel 3-band enhancer with independent gain and level controls for lows, mids, and highs. The Tri-Hormonic Phalanx lets you shape each frequency band separately—add grit to the mids, shimmer to the highs, or body to the lows, all without overlap. Whether for clean sculpting or stacked harmonic saturation, it delivers clarity, power, and phase-coherent balance.

RhPf Electronics

3D Viewer and AR tool

Interactive Frequency Response

Interactive Demo

Tri-Hormonic Phalanx

Jarek Harek

KORG PitchBlack Poly polyphone Pedal Tuner - Ankundigung einen revolutionaren Fortschritt in der polyphonen Tuner, die Ihre Optimierungszeit verkurzen wird! Der Korg Pitchblack Poly ist der neue Standard in Gitarre und Bass pedal Tuner, mit dem exklusiven "String Seeker."

KORG PitchBlack Poly Polyphonic Pedal Tuner - Announcing a revolutionary advance in polyphonic tuners that will shorten your tuning time! Korg's pitchblack Poly is the new standard in guitar and bass pedal tuners, featuring the exclusive "String Seeker."

KORG

Demo by Luís Fernando Bassetto

Review by Premier Guitar

Review by The Gear Page

Review by Talk Bass.com

Pitchblack Poly PB03

The MXR Ten Band Graphic EQ gives players
huge amounts of tone shaping and level control
in a bullet-proof enclosure. This pedal has
been upgraded with noise-reduction circuitry,
true bypass switching, a lightweight aluminum
housing, and a second output so you can run two
separate signal chains. With ten carefully chosen
frequencies and both input and output level
controls, the Ten Band EQ will let you tune your
bass or guitar rig to any room in seconds. 

Review by

Demo by PMTVUK

M108S 10 band EQ [silver version]

QuickMount Type D

Pedal-Montageplatte für große horizontale Pedale

Pedal Mounting Plate For Large Horizontal Pedals

JakobSlash

Das GE-7 Equalizer-Pedal bietet sieben EQ-Bänder im Bereich von 100Hz bis 6,4kHz, ideal für Gitarrensounds, mit einer Anhebung/Absenkung von +/- 15dB pro Band. Damit kannst du deinen Sound vollständig kontrollieren und unerwünschte Rückkopplungen eliminieren, insbesondere wenn du ihn nach einem Verzerrungseffekt anschließt.

The GE-7 Equalizer pedal offers seven bands of EQ ranging from 100Hz to 6.4kHz, ideal for guitar sounds, with boost/cut of +/- 15dB per band. This lets you completely control your sound and eliminate unwanted feedback, particularly when connected after a distortion effect.

Official Website

Review by The Gear Check

Review by Audiofanzine

Review by Reddit /guitarpedals

Review by Guitar Gear

Manual's All

Demo by Law of the Riff

Demo by New Music Academy

Demo by Guitar Bonedo

Demo by Musicmaker

GE-7 Equalizer

Für 9-15 FX-Pedale, 1 MOD-Slot - **622 x 330 mm / 24.49" x 12.99"** - erhältlich mit Gig Bag oder Flight Case

For 9 - 15 FX pedals, 1 MOD slot - **622 x 330 mm / 24.49" x 12.99"** - available with Gig Bag or Flight Case

JDecay

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 2 V2 wurde als Patchbay speziell für MIDI-basierte Setups, Verstärker und Geräte sowie eine USB-Verbindung zwischen Pedalboard und Computer oder Soundkarte entwickelt. Mit vier TRS-Through-Verbindungen lässt sich das MOD 2 V2 perfekt in True Stereo Setups von Keyboards oder Synthesizern integrieren oder als zentraler Zugang und Ausgang des Boards nutzen. Alternativ lassen sich Effektpedale im Front End und im Effekt-Loop des Verstärkers postieren (4-Kabel Methode).
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 4 x 6,3 mm TRS thru
- 2 x 5-pin DIN MIDI thru
- 1 x USB Type A thru
- 1 x DC 2,1 x 5,5 mm Hohlstecker thru
- 1 x AC IEC thru (männlich vorne / weiblich hinten)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 420 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 2 V2 is a pass-thru box especially designed for MIDI-controlled amplifiers and devices, USB connections to a computer, or a sound card. The 4x TRS thru connections will also work great for true stereo setups with keyboards or synthesizers. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 4 x 6,3 mm / ¼" TRS thru
- 2 x 5-pin DIN MIDI thru
- 1 x USB Type A thru
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 420 g / 0.93 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS, MIDI & USB Patchbay

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 3 V2 ist eine Patchbay für Sänger und Akustik-Musiker. Über die zwei XLR-Ausgänge kannst du ein Stereo-Signal von dein MOD senden und an den XLR-Eingang lässt sich ein Mikrofon anschließen. Mit drei TRS-Through-Verbindungen lässt sich das MOD 3 V2 außerdem als zentraler Zugang und Ausgang des Boards nutzen um zum Beispiel Effektpedale in den FX-Loop eines Verstärkers einzuschleifen.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 3 x 6,3 mm TRS thru
- 2 x XLR thru (männlich vorne / weiblich hinten)
- 1 x XLR thru (weiblich vorne / männlich hinten)
- 1 x DC 2,1 x 5,5 mm Hohlstecker thru
- 1 x AC IEC thru (männlich vorne / weiblich hinten)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel


The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 3 V2 is a pass-thru box designed for use by vocalists and acoustic players. The 2x XLR outputs allow you to send a stereo signal from your MOD and the 1x XLR input can be used to connect your microphone. You can also use it to run several pedals from your board through the effects loop of your amp, or simply use the MOD as a central access point to your pedalboard.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 3 x 6,3 mm / ¼" TRS thru
- 2 x XLR thru (male front / female back)
- 1 x XLR thru (female front / male back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR Patchbay for Vocalists & Acoustic Players

P:US - Bass

Paul Stracke

Der ML5R ist ein neu sortierbarer Loop-Switcher, der deinen Umgang mit Audioeffekten revolutioniert. Erlebe völlig neue Sounds mit deinen vorhandenen Effekten – allein durch das Ändern ihrer Reihenfolge.

Seine schlanke, intuitive Benutzeroberfläche ermöglicht es dir, die Reihenfolge deiner Effekte jederzeit schnell und einfach zu verändern.

ML5R is a reorderable loop switcher that redefines your approach to audio effects. Experience entirely new sounds from your existing effects - just by switching up their order.

​

Its sleek, intuitive interface enables you to switch the order of your effects quickly, whenever you want.

Morningstar Engineering

ML5R

The EHX Deluxe Bass Big Muff is the flagship of EHX bass fuzz and delivers enhancements to the classic Bass Big Muff Pi that are specifically tailored to the needs of the modern bass player.

The sturdy foundation of the Deluxe Bass Big Muff is the thunderous tone insprired by the classic Black Russian Big Muff of the ’90s. Added to that is a Blend knob to mix back in your original tone and add definition to your low end. A Gate quiets unwanted hiss for a smooth performance.

The ultimate tone-scultor of the pedal is the Crossover section. Here the Fuzz and Dry signals are seperated and run though a High Pass Filter and Low Pass Filter respectively. This creates a tone with fiery top and and a huge, thumping bottom.

This is the most versitile Bass Big Muff ever!

Electro-Harmonix

Demo by Bully Thakidd

Demo by Reverb

Demo by The Bass Channel 

Deluxe Bass Big Muff Pi

PedalSafe Type O

QuickMount Type O

Pedal-Montageplatte für FRIEDMAN Overdrive Deluxe & WALRUS Descent Pedale

Pedal Mounting Plates for FRIEDMAN Overdrive Deluxe & WALRUS Descent pedals

Schutzabdeckung & RockBoard-Montageplatte für FRIEDMAN Overdrive Deluxe & WALRUS Descent Pedale

Protective Cover & RockBoard Mounting Plate For FRIEDMAN Overdrive Deluxe & WALRUS Descent pedals

Schutzabdeckung & universelle Montageplatte für FRIEDMAN Overdrive Deluxe & WALRUS Descent Pedale

Protective Cover & Universal Mounting Plate For FRIEDMAN Overdrive Deluxe & WALRUS Descent pedals

David Litaba

Das EarthQuaker Devices Afterneath V3 klingt ein wenig so, wie es aussieht: Wie ein Sound-Zauberer, der eine riesige Höhle betritt und sich in die Ambient-Reverb-Schlacht wirft. Das Pedal bietet ein extrem breites Spektrum an unterschiedlichen, riesigen, ausladenden und magischen Ambient-Reverbs und deckt von wilden, verschlungenen Hall-Effekten über atmosphärische, kurze, digitale Delays bis zu Staccato-artigen, rhythmischen Wiederholungen mit bizarren Sounds alle denkbaren Effekte ab. Die Regelmöglichkeiten für Length (Länge des Nachhalls), Dampen (Tone), Reflect (Depth, Regeneration) und Mix (Wet/Dry-Mix) sind bekannte Parameter bei Reverb-Pedalen und arbeiten sehr intuitiv. Der Diffuse-Regler kontrolliert die Streuung des Nachhalls und ermöglicht je nach Setting aggressivere Sounds, bei denen das Einsetzen der einzelnen Wiederholungen deutlicher hörbar oder weicher und verwaschener wird. Der Drag-Regler trennt die digitalen Delay-Gruppen voneinander. So rücken den Repeats je nach Setting näher aneinander (Hall-ähnlicher Effekt) oder werden auseinander gezogen, sodass statt eines Halls verstreute Ping-Pong-Effekte zu hören sind.

The EarthQuaker Devices Afterneath V3 sounds a lot like it looks: a sound wizard bursting forth from ethereal cave and ready for the ambient reverb battle. The pedal offers an extremely wide range of different, vast, expansive, and magical ambient reverbs and covers all possible effects from wild and cavernous reverb effects to atmospheric reverberations of short digital delays to scattered, rhythmic delays with bizarre characteristics. The controls for Length (decay length of the reverb), Dampen (tone), Reflect (depth, regeneration) and Mix (wet/dry mix) are well-known parameters for reverb pedals and work very intuitively. The Diffuse knob adjusts the spread of the reverb, turned counterclockwise, the reverb is sharper with more attack, resulting in a stuttering sputter of individual early reflections. Clockwise casts a washy, more ambient-sounding effect. Drag separates the individual digital delay lines, clockwise positions will gather the delay lines close together for a more reverb-like effect. Turn the Drag counterclockwise, and the delay lines will begin to pull apart for a scattered ping-pong delay effect.

EarthQuaker Devices

Official Product Page

EarthQuaker Devices Afterneath V3 - Official Demo Video

EarthQuaker Devices Afterneath V3 - Official Manual Video

EarthQuaker Devices Afterneath V3 - Official Demo Video, Designer Notes with Jamie Stillman

EarthQuaker Devices Afterneath V3 - Demo Video - Dennis Kayzer

EarthQuaker Devices Afterneath V3 - Review by Gitarzysta [PL], [06-2020]

EarthQuaker Devices Afterneath V3 - Review by Gitarre&Bass [DE], [06-2020]

Afterneath V3

QuickMount Type B1

Pedal-Montageplatte für FRIEDMAN, KEELEY Halo, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD, Jupiter V2 und Mooer GL 100 Pedale

Pedal Mounting Plate for FRIEDMAN, KEELEY Halo, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD, Jupiter V2 and Mooer GL 100 pedals

ch ray

Dieses Pedal kombiniert den satten Klang des Harmonic Booster mit der Präzision einer Parallelkompression mit einstellbarem Frequenzbereich und bietet Ihnen unübertroffene Kontrolle. Mit einem 6-Band-EQ, einer Pegelreduzierungsanzeige und der Option, 7 benutzerdefinierte Impulsantworten über USB zu laden, bietet es ultimative Klangflexibilität für Bassisten aller Genres. Pur, kraftvoll und präzise – Ihr sauberer Ton, perfektioniert.

Combining the rich tone of the Harmonic Booster with the precision of an adjustable frequency range parallel compression, this pedal gives you unmatched control. With a 6-band EQ, gain reduction meter, and the option to load 7 custom Impulse Responses via USB, it delivers ultimate tonal flexibility for bass players of any genre. Pure, powerful, and precise—your clean tone, perfected.

Darkglass Electronics

Demo by IvanBassist

Review by No Treble

Review by sinusoidal music

Review by Bass Musician Mag

Review by gearnews.de

Luminal Booster Ultra

When it was introduced in 2010, the original POLYTUNE forever revolutionized the way musicians tune their instruments. Praised by professional and amateur players, guitar tuning instantly became as simple as Strum - Tune - Rock! So how do you make the best-selling polyphonic tuner even better? You take it to the next level by: providing multiple tuning modes, including polyphonic, chromatic, strobe and a variety of altered tunings; adding an onboard BONAFIDE BUFFER to preserve your tone over long cable runs and pedal board signal paths; and upgrading the LED display for even higher tuning accuracy. Say hello to your next tuner – POLYTUNE 3.

Review by Charleston Classical Guitar

Review by musicradar

Demo by American Musical Supply

Demo by Addicted to Gear

Demo by realbeal

Polytune 3

Patrick Windred

The upgraded Microtubes B7K Ultra with Aux in features: (1) Single user loadable cabinet simulation impulse response. (2) Micro-USB B port to connect to PC/Mac to load a different Virtual Cabinet through the Darkglass Suite. (3) 3.5mm headphone output with cabinet simulation. (4) Balanced XLR output with switchable cabinet simulation. (5) A 3.5mm stereo input that allows you to practice with backing tracks from e.g. your smartphone or laptop.

Demo by Darkglass Elelectronics 

B7K Ultra V2 'The Squid' Limited Edition

Das Plutoneium Chi Wah Wah V2 ist ein kompaktes, platzsparendes Wah-Pedal mit einem schalterlosen, optischen Aktivierungsdesign. Es verfügt über eine originale analoge, induktorbasierte resonante Wah-Schaltung, die einen dynamischen Klang liefert. Das Pedal hat drei Regler—Level, Contour und Gain—für eine feine Klangformung. Das V2-Modell ist in einem robusten Gehäuse aus gewalztem Stahl untergebracht und bietet im Vergleich zu seinem Vorgänger mehr Bass und einen gleichmäßigeren Verlauf. Es ist darauf ausgelegt, sehr langlebig und einfach auf einem überfüllten Pedalboard zu verwenden.

The Plutoneium Chi Wah Wah V2 is a compact, space-saving wah pedal with a switchless, optical actuation design. It features an original analog, inductor-based resonant wah circuit, providing a dynamic sound. The pedal has three controls—Level, Contour, and Gain—for fine-tuned sound shaping. Housed in a durable rolled steel chassis, the V2 version offers more low-end and a smoother taper than its predecessor. It is designed to be highly durable and easy to use on a crowded pedalboard.

Plutoneium

Demo by Prymaxe

Demo by Oszyby

Review by The Pedal Lab

Review by Guitar Pedal X

Chi Wah Wah V2

Niko Zarzani

Sennheiser

EM100 G1

Custom Audio Electronics

Demo by  Izwi

Demo by  Kev_k_ life

Review by Ultimate Guitar

Boost / Line Driver

Paul De maio

MC8 Pro

Katherine Copanic

SP Technologies introduces the new DECI-MATE™ Micro Decimator pedal. The DECI-MATE pedal is a full implementation of the world renowned Decimator circuit with new tracking improvements in a small, micro pedal package. When real estate is critical, the DECI-MATE is the answer.