Anthony Gachomo

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 1 V2 ist eine Pass-Through-Box, die speziell für Gitarristen und Bassisten entwickelt wurde. Du kannst das MOD 1 V2 nutzen um mehrere Pedale deines Setups im Front End und im Effekt-Loop des Verstärkers zu postieren (4-Kabel Methode) oder die vier TRS-Anschlüsse als zentralen Zugang und Ausgang des Boards nutzen. Die XLR-Through-Verbindung kann als Signalausgang vom Pedalboard zum Mischpult oder zur PA verwendet werden.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 5 x 6,3 mm TRS thru
- 1 x XLR thru (männlich vorne / weiblich hinten)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 5 x 6,3 mm / ¼" TRS thru
- 1 x XLR thru (male front / female back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR, IEC & Barrel Patchbay

P&W Rig 1.0

Gas Giant ist ein High-Gain Analog-Fuzz-Pedal mit wählbaren Voicing-Optionen für die Tonregelung und einem integrierten Noise Gate. Inspiriert von den legendären transistorbasierten Fuzz-Pedalen, die Anfang der 1970er-Jahre in New York City gebaut wurden, verwendet der Gas Giant vierfach gematchte Transistorensätze, um sicherzustellen, dass jedes einzelne Pedal perfekt auf den schwer zu findenden "Sweet Spot" klassischer Vintage-Pedale abgestimmt ist.

Neben den Gain- und Volume-Reglern verfügt das Pedal über eine doppelt funktionale Tonregelung, die sowohl den typischen satten Bass, schneidende Höhen und den klassischen Mid-Scoop alter Fuzz-Pedale liefert als auch eine Pigtronix-eigene Midrange-Bump-Einstellung für mehr Präsenz im Mittenbereich. Diese zwei Voicing-Optionen verändern die Frequenzansprache der Tonregelung im gesamten Regelweg erheblich und bieten eine Vielzahl massiver Fuzz-Sounds im kompakten 3-Regler-Format.


Gas Giant is a high-gain analog jumbo fuzz pedal with switchable voicing options for the tone control and a built-in noise gate. Inspired by the iconic transistor-based fuzz pedals built in NYC in the early 1970’s, the Gas Giant uses quad-matched transistor sets to ensure that each and every unit is perfectly dialed in to the “sweet spot” that can be so elusive to find in vintage pedals.

In addition to the Gain and Volume knobs, there is also a dual-function Tone control that delivers the traditional heavy bass, searing top-end and midrange Scoop found in vintage pedals, as well as a signature Pigtronix midrange-forward Bump setting. These two voicing options drastically change the frequency response of the Tone control throughout its entire range, providing a bevy of gargantuan fuzz tones in a compact 3-knob stompbox.

Pigtronix

Demo by R. J. Ronquillo

Official Product Video

Product Page

Review by Guitar Pedal X

Review by Music Radar

Gas Giant

Nicolás Andrés Pérez Pérez

JOYO Audio delivers a compact and convenient way to combine the essential tools of the guitarists pedalboard that do not necessarily make a sound, but enable it to all happen. That is the Power tune that combines both power supply and tuner into one amazing product, saving space and eliminating noise. 
The POWER section features a filtered low noise output with short circuit and over current protection. Six outputs give you the standard 100ma power for most of your standard analogue pedals on your board, whilst two additional outputs can deliver a whopping 500ma, which will cover even the most demanding digital effects units.

JOYO

Manual

Demo by EytschPi42

JF-18R Power Tune

Franko Teston

A pedal tuner that has an on/off buffer switch to boost your instrument's signal to combat instrument cable length resistance. The tuner also has a power jack out to power other pedals.

Review by reddit /basspedals

JF-19 Buffer Tuner

ch ray

FLAMMA has been producing highly versatile yet minimalist pedals for over a decade, and its latest release, the FC04 tuner pedal, is a fine example that the brand isn’t slowing down. It's a high-precision tuning pedal featuring up to ±1 points in pitch accuracy, cased within a lightweight and portable full-metal body pedal. 

The FC04 stands out with its simple design while leveraging its precise tuning capabilities to accommodate most electric and electro-acoustic instruments–not just guitars. This works particularly well for seven-string guitars and different bass guitar variations. The pedal features a ¼” jack input, so if the user used a ¼” to XLR adaptor, any acoustic instrument could be tuned through a microphone.

Flamma

FC04 Tuner

David Graves

The Pigtronix 2NR is a no-nonsense, high-precision chromatic tuner pedal for guitar and bass. It features a large, high-contrast LED screen and ultra-fast pitch detection software that makes tuning quick and easy for musicians of every skill level.

2NR intentionally contains no extraneous features. There are no alternate modes or opportunities for accidental frustration. The pedal exists solely to help musicians tune their instrument to 440 Hz standard concert pitch as quickly and accurately as possible.

When 2NR is activated, the output is muted. When the pedal is not in use, relay-based, true bypass switching ensures that 100% of your tone passes through the pedal without any loss of fidelity. Housed in a robust aluminum chassis, 2NR is built for a lifetime of onstage performance. Pigtronix 2NR runs on standard 9VDC power.

Review by No Treble

2NR Chromatic Tuner Pedal

QuickMount Type A

Pedal-Montageplatte für Standard-Einzelpedale

Pedal Mounting Plate For Standard Single Pedals

Geir Arne Hagby

The LANEY IRONHEART FOUNDRY series LOUDPEDAL is a powerhouse 60-Watt twin channel amplifier in a pedal format. You are now part of our crusade to deliver crushingly powerful amplification. A journey that began in 1967 in The Black Country, in the heart of England.

Laney Amplification

Review by musicradar

Review by Guitar World

Demo by Sweetwater

Demo by Andertons Music

Ironheart Foundry Loudpedal

Zixton Han

Hey there pedalboard wizard! Ready to supercharge your rig? Say hello to the DirectAmp, the ultimate stereo amp and cab simulator that's here to make your tonal dreams a reality! Not just another gadget - it's your ticket to tonal paradise, straight into the PA or through your headphones in glorious stereo! 

Quilter

Demo by Leon Todd

Review by Gearnews

Review by The Gear Page

DirectAmp

Roberto Gonzalez Lozano

2-Channel Line Isolation Box for DSP Guitar rigs or Percussion pads with XLR Polarity Reverse switch and Summing on 1/4″ & XLR outs.

Pinstripe Pedals

Demo by Worship Gear Collective

DISO+ DLX

Matias Jaques

The Torpedo C.A.B. M+ takes Two Notes’ acclaimed cabinet emulation technology and packs it into a pedalboard-friendly enclosure. Thanks to this speaker cabinet emulator pedal, you can bypass your guitar or bass amplifier’s cabinet while preserving every ounce of your tone and spatial dimension. This pedal is loaded right out of the box — you get 32 guitar and bass cabinets, eight power amplifiers, eight microphones, and eight rooms. And if you’ve upgraded to the latest firmware, you also get a high-headroom clean preamp emulation, transforming the C.A.B. M+ into a premium-sounding clean pedal platform, complete with studio-grade effects. 

Two Notes Audio Engineering

Demo by Riffs, Bears & Gear

Demo by Guitar Bonedo

Review by bonedo

Review by Sound on Sound

CAB M+

Mark Boton

Die Nux Amp Academy verfügt über den NUX TSAC-2K (White-box Amp Modeling) Algorithmus um den Sound und das Feeling von Weltklasse-Röhrenverstärkern in einem Effektpedal unterzubringen. Dank riesigem Headroom und Dynamikbereich ergibt sich ein realistisches Amp-Feeling und hervorragende Spielbarkeit. Amp Academy bietet 6 legendäre Verstärkermodelle wie Vintage (Fender Twin Reverb), Classic (Fender Vibro King), Modern (Mesa Boogie Mark I), Brown (Friedman HBE), Red (Mesa Boogie Dual Rectifier) und Iridium (Bogner Uberschall).

WORLD-CLASS STOMP-BOX AMP MODELER.
Nowadays the Amp-less approach is quickly becoming a trend for modern musicians—like guitarists who appreciate a variety of pedals and amps, but don’t have the luxury of a roadie crew to lug all of them around
Amp Academy inherits NUX TSAC-2K (White-box Amp Modeling) algorithm which delivers the sound and feel of world-class tube amplifiers in a super-portable stomp-box enclosure. And, its huge headroom and dynamic range is a pedal friendly platform.

Review by Gearnews 

Demo by John Nathan Cordy

Demo by  AshCreekStudios

Review by gearnews.de

Demo by CSGuitars 

Demo by Mike Hermans 

Amp Academy

Rama Adhiguna

Preamp House is the newly released pedal from JOYO R series, delivering 9 amps’ preamps in one pedal! It has 65Twin / JCM900 / AC30 / LONESTAR / DUAL RECTIFIER / 5150Ⅲ / POWERBALL / TH200 / BE100 and more, each amp features clean channel and distortion channel and can be switched by Footswitches( 18 tones in all)! Due to the 2 channel design, you can switch easily between Fender’s Clean and Marshall’s Distortion! One built-in cabinet simulation facilitates stage performance. FX LOOP interface for external FX pedal, balanced Output. Preamp House is an user-friendly and stable tone solution for musicians who perform and record frequently.

Demo by woodsnstrings

Review by Johannes Krayer, amazona.de

R-15 Preamp House

Leander Kindervatter

Mojo Attack
Portable Dual Channel Floor Amplifier
Hotone's Nano Legacy amps are so in demand that it only made sense for us to combine two of them into one, put it in convenient floor-based stompbox, and let it rule as the core of your professional sound system.

More than simply combining two Nano Legacy amps in one, the Nano Legacy Floor amps feature upgraded sound quality, increased output power (up to 75 watts) and extended onboard functions/effects. Plus, these portable dual-channel amps let you integrate a complete rig that is always ready for touring and recording: just connect to a cabinet/mixer/interface and you're ready to rock!

HOTONE

Review by Gitarre & Bass

Review by delicious audio

Mojo Attack Pedal Amp

DJ WIlson

There’s nothing quite like the subtle ways compression can enhance your tone and overall playing experience. The FC21 aims to provide that classic, optical compression while maintaining a smooth attack and decay. Tuned specifically for a sensitive dynamic range with a built-in EQ and volume knobs that allow customization of the effect. As is standard in the FC lineup, the FC21 features a compact, metal shell with true bypass when not engaged.

Demo by Ryan Lutton

Review by Pedal of the Day

FC21 Optical Compressor

Christopher Payne

The FC10 Noise Gate pedal is a flexible, compact noise gate aimed at squashing annoying hum and feedback while preserving your original, beautiful guitar tone. The FC10 controls are extremely simple featuring a toggle switch that lets users quickly switch between a Hard mode and Soft mode with each mode indicating the level of noise reduction. Also included is the Threshold knob, allowing users to tweak when the noise gate effect kicks in based on the signal input. Now, we know noise gates aren’t the most exciting pedal to add to your rig so that’s why we made the FC10 super compact so you can fit it anywhere and housed it in a durable metal shell so you’ll never need to replace it.

Demo by Pedal of the Day

FC10 Noise Gate

TAI  TONG YEE

Welch schönes Thema doch Effekte und Amps sind, nicht wahr? Seit den ersten Bodentretern Mitte des vergangenen Jahrhunderts faszinieren sich fast alle Gitarrist:innen für die Boxes of Goodness. Seit der Einführung der Digitaltechnik in die Effektgerätbranche werden die Kisten heiß diskutiert. Gerade die Modeling-Technik und später das Capturing/Profiling lösen immer wieder große und lange Diskussionen in den Online-Portalen (oder am heimischen Gitarren-Stammtisch) aus.

"Upgrade" is more than a 7-letter word. It embodies the continuation and evolvement beneath
the surface, and embraces revolution and creativity outside the box.
It’s what Ampero II Stomp does. Throughout years of grinding to establish its core technologies
from empirical practice, Hotone team proudly presents this soul partner for your
sophisticated taste in the sound of the music.

Review by Preshan John, audiotechnology.com

Review by Simon S, amazona.de

Demo by Andetons Music Co

Demo by Sonic Drive Studio 

Demo by Bernd Kiltz - Gitarrenvideos

Ampero II Stomp

David Litaba

Mit dem TC Electronic Plethora X3 setzt die dänische Effektschmiede zum Nachschlag an und bietet neben dem 2020 erschienen Plethora X5 eine kompaktere und minimal reduzierte Form dieses Pedalboards. Die grundlegende Konzeption bleibt dabei bestehen und so wartet die X3-Version ebenfalls mit der Möglichkeit auf, ein eigenes, individuelles Floorboard mit sämtlichen Toneprint-Pedalen zusammenzustellen und damit das Beste aus der Funktionsweise von klassischem Pedalboard und Multieffektpedal zu vereinen.

TonePrint Pedalboard with up to 127 Boards, 3 Pedal Slots, All Your Favorite TC Effects, 75 TonePrint Slots Per Effect, 3 MASH Footswitches and Tape Deck Looper

TC Electronic

Review by GEARNEWS 

Review by AMAZONA 

Review by bonedo 

Demo by SweetWater 

Demo by Andertons 

Plethora X3

NUX B-8 ist ein neu definiertes Drahtlossystem mit automatischer Einrichtung, störungsfreier 2,4-GHz-Rundfunkfrequenz und hochwertiger 24-Bit-48-kHz-Audioübertragung. Die Latenzzeit bei der Signalübertragung beträgt nur 2,5 ms bei bester Leistung. Die Betriebsreichweite beträgt bis zu 50 Meter (160 Fuß). 

Das drahtlose B-8-System eignet sich für alle Arten von E-Gitarren, E-Akustikgitarren, Bässe und verschiedene Instrumente mit elektronischen Tonabnehmern. Unabhängig davon, welches Instrument Sie spielen, können Sie die Bequemlichkeit mit B-8 Wireless genießen.

NUX B-8 is a redefined wireless system with automatic setup, 2.4 GHz interference-free broadcasting frequency, and 24-bit 48 kHz high-quality audio transmitting. The signal transmitting latency is as low as 2.5ms at the best performance. The operation range is up to 50 meters (160-feet). 

B-8 wireless system fits all types of electric guitar, electric-acoustic guitar, bass guitar, and various instruments with electronic pickups. No matter what instrument you play, you can enjoy the convenience with B-8 wireless.

Review by AMAZONA

Review by gearnews

Review by reddit /guitarpedals

Demo by Scott Uhl

Demo by Andrew Siemon

QuickMount Type C

Pedalmontageplatte für große vertikale Pedale

Pedal Mounting Plate For Large Vertical Pedals

Tyson Edwards

Introducing the Lion, a 100% all analog signal path, programmable distortion pedal with onboard presets and full midi control.

The Lion is an op amp based distortion with hard clipping diodes placed after the feedback loop of the op amp. While it is it's own unique circuit, it can be closely compared to similar type circuits like the Boss DS-1, Pro Co Rat, and JHS Angry Charlie, etc. The Lion features an internal 18V charge pump converting a standard 9V power supply to 18V for maximum headroom and responsive touch dynamics.

JET Pedals

Demo by Nobes Music

Manuals Page

Lion Distortion (In black)

Caleb Harding

The Lamb is an op amp based overdrive circuit with soft clipping diodes placed inside the feedback loop of the op amp. While it is it's own unique circuit, it can be closely compared to similar type circuits like the Marshall BluesBreaker, Analog Man King of Tone, and JHS Morning Glory, etc. 

Review by Worship Guitar Skills

Demo by gearfever

Demo by Hey Worship Leader

Demo by Ambient Endeavors

Demo by Home Studio Simplified

LAMB

Jackson Okun

Echolution 3 is a multi-tap stereo modulation delay offering a myriad of sound design options including reverse, jump, pong, modulation tempo sync, variable low pass filter, flexible signal routing and comprehensive MIDI control. Delay times ranging from 100ms to 5 seconds can be dialed in using the Time knob or via Tap Tempo using the left footswitch. A second delay tap can be set to the same length or a fraction of the main delay time to create rhythmic echoes. The ¾ fraction creates a dotted eight note delay, while the Golden fraction uses the sacred geometry of the Golden Ratio (.382) as the multiplier for the second tap. The multi-tap settings can be even further enhanced by the stereo ping pong effect, which causes the different delay taps to switch sides on each repeat. Store up to 4 presets, unlock hidden features with the Universal Remote footswitch, and design yet unheard delay lines. Runs on standard 9VDC.

Demo by Chord of Orion

Echolution 3

Florian LE CORRE

MORPH ACROSS THE SPACETIME SPECTRUM.
Years in the making and the first of its kind, Cosmosis is a stereo, high-fidelity ambient reverb that allows musicians to tailor three original spaces—Theatre, Temple, and Cosmos—as well as manipulate them in real time. In addition to controls for the size of the reverb, wet/dry blend, and filtering, Cosmosis features a unique Morph function that allows musicians to alter their reverb settings in real-time by pressing the left footswitch. The three space algorithms found inside of Cosmosis are all-original and truly unique. Theatre puts the player in a variable room that ranges from cozy to highly reflective using multiple parallel short reverberators. Temple occupies a dramatic, large indoor space by implementing numerous long reflections in both parallel and series. And Cosmos creates an enormous spectrum of heavenly reverb derived from the harmonic content it’s fed. The Morph feature found in Cosmosis provides a simple way for players to trigger a gradual change to various reverb parameters over a specified amount of time set by the accompanying Morph Rate knob. Players can set both “red” and “green” values on their Tone, Blend, and Size knobs, then engage the Morph footswitch to oscillate between the two reverbs at their desired rate. Any combination of knobs can be assigned to morph. Create elegant morphs for subtle movement or sweeping, cinematic morphs for dramatic sound design effects. Save up to four custom reverb presets, including morphing. Cosmosis runs on standard 9VDC power.

Demo by Pigtronix

Review by

Cosmosis

Hiu Fung Hui

The Hotone Tuner Press is not just your average tuner pedal; it's the epitome of versatility. Weighing in at a mere 600g, this pedal isn't just a tuner; it's a volume pedal, an expression pedal, and a buffer pedal all rolled into one. The footswitch provides tactile feedback, allowing you to seamlessly switch between expression and volume control. Elevating the pedal in volume mode activates silent tuning automatically. The HD LCD screen, complemented by the switching indicator, ensures an intuitive, accurate, and rapid user experience. Furthermore, the Hotone Tuner Press inherits the classic design of the popular Ampero Press series, seamlessly blending Hotone aesthetics with portability and practicality. 

Demo by Chris Ma的Dark Horse Lab

Tuner Press

Für 9-15 FX-Pedale, 1 MOD-Slot - **622 x 330 mm / 24.49" x 12.99"** - erhältlich mit Gig Bag oder Flight Case

For 9 - 15 FX pedals, 1 MOD slot - **622 x 330 mm / 24.49" x 12.99"** - available with Gig Bag or Flight Case

James Squire

Wet/Dry board - used at Carols event in 2025. Had issues with the DISO+ (excessive noise and feedback when summing stereo XLR outputs.

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 3 V2 ist eine Patchbay für Sänger und Akustik-Musiker. Über die zwei XLR-Ausgänge kannst du ein Stereo-Signal von dein MOD senden und an den XLR-Eingang lässt sich ein Mikrofon anschließen. Mit drei TRS-Through-Verbindungen lässt sich das MOD 3 V2 außerdem als zentraler Zugang und Ausgang des Boards nutzen um zum Beispiel Effektpedale in den FX-Loop eines Verstärkers einzuschleifen.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 3 x 6,3 mm TRS thru
- 2 x XLR thru (männlich vorne / weiblich hinten)
- 1 x XLR thru (weiblich vorne / männlich hinten)
- 1 x DC 2,1 x 5,5 mm Hohlstecker thru
- 1 x AC IEC thru (männlich vorne / weiblich hinten)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel


The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 3 V2 is a pass-thru box designed for use by vocalists and acoustic players. The 2x XLR outputs allow you to send a stereo signal from your MOD and the 1x XLR input can be used to connect your microphone. You can also use it to run several pedals from your board through the effects loop of your amp, or simply use the MOD as a central access point to your pedalboard.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 3 x 6,3 mm / ¼" TRS thru
- 2 x XLR thru (male front / female back)
- 1 x XLR thru (female front / male back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR Patchbay for Vocalists & Acoustic Players

Carols 2025

You’re on stage in between songs. You just changed your pedal settings and the next song is about to start. How are your levels? Too high? Too low? Maybe you’re not sure until the song starts and you hear yourself. Well, if you just had the Mini-VUMP (Voltage-Unit Meter Pedal), you could hit the Mute switch, strum your guitar, check your levels, and discover you left the Boost pedal on before you embarrass yourself on the next song!

You can also use this device to equalize the loudness of your pedals on your pedalboard! Just turn one pedal on and off and change your gain settings one pedal at a time.

JoyeMusic

Mini-VUMP

Tester

29 Pedals

Review by American Songriter

Demo by Rabea Massaad

EUNA

Alex  Wilkins

When we released our original Compressor back in 2011, it quickly became a favourite among guitar and bass players alike who were searching for something more than the typical oversimplified controls found on most compressor pedals. Although our original Compressor sounded great on bass (and still does!) we set out to do even better. 
On top of the full range of features and controls normally only seen in high end studio equipment, such as input and gain reduction metering, independent attack and release controls, a mix knob for parallel compression, and an external sidechain insert, we’ve now added a fully variable sidechain high pass filter, and a two position ‘tone + colour’ circuit which adds gentle tone sculpting and harmonic distortion, giving your bass some delicious character.  

Empress Effects

Review by bassic

Review by CompressorPedalReviews

Demo by Pertybass

Demo by BassTheWorld.com

Bass Compressor Blue Sparkle

Robert Ossenkopp

More is More. It sounds big, warm, and punchy. It doesn’t have tone controls because it doesn’t need them, the single knob controls the overall output volume. It wasn’t designed to replace anything else, just to give you More. It’s hard to really describe the sound, because it wasn’t designed to have an overwhelming sound, but moreso to compliment the sound you already have. It wasn’t designed to be a great rig by itself, but it was designed to take your great rig and make it More.

sushiboxfx

Review by Talk Bass.com

Demo by  jbybj

More

Nathan Rapheld

Seit über 75 Jahren vertrauen einige der größten Namen auf der Bühne und im Studio auf Peterson als Maßstab in Sachen Stimmpräzision. Der StroboStomp Mini™ bietet die unübertroffene Stimmgenauigkeit von 0,1 Cent aller authentischen Peterson Strobe Tuner im Format eines Mini-Pedaltuners. Mit einem hochauflösenden LCD-Strobe-Display mit variabler LED-Farbhintergrundbeleuchtung klingen Ihre Instrumente nie besser gestimmt. Ein True-Bypass-Modus ohne Knackgeräusche und ein gepufferter Ausgabemodus geben Ihnen die Kontrolle über Ihren kostbaren Klang ohne Kompromisse. Mit über 80 exklusiven Sweetened Tunings® und Guided Tunings an Bord können Sie Ihren Sound einstellen und stimmen wie die Profis!

For over 75 years, Peterson has been trusted by some of the biggest names on stage and in the studio as the standard in tuning precision. The StroboStomp Mini™ delivers the unmatched 0.1 cent tuning accuracy of all authentic Peterson Strobe Tuners in a mini pedal tuner format. Featuring a high-definition LCD strobe display with variable LED color backlight, your instruments will never sound more in tune. A pop-less true bypass mode and a buffered output mode place you in command of your precious tone without compromise. With over 80 exclusive Sweetened Tunings® and Guided Tunings on-board, you'll be able to dial in your sound and tune like the pros!

Peterson

Review by guitar pedal X

Quick Start Guide

Demo by The Time Preservation Society

Strobostomp Mini

Branislav Vukobratovic

Die Cioks DC7 Mehrfach-Stromversorgung für Effektpedale stellt im Vergleich zu anderen Geräten dieser Art jeder Menge Energie bereit. Und das in einem flachen Gehäuse, das sogar unter ein Pedaltrain Nano Board passt. Das stattliche Kraftwerk bietet laut Angaben des dänischen Herstellers bei 9 Volt massive 4620 mA Strom und wäre damit rein rechnerisch in der Lage, ca. 577 Tubescreamer-Pedale (!) in Betrieb zu halten.

If you use effects pedals, whether on stage or in the studio, running them from a high-quality power supply is essential to getting the best performance and lowest noise out of them. The best power supplies have regulated, electrically isolated outputs, and that gives the same electrical separation as when running the pedals from batteries — but without the obvious disadvantages! There are several excellent power supplies available that offer such features, but CIOKS have managed to come up with an incredibly compact solution, seemingly without compromising on quality or flexibility.

CIOKS

Demo by The Pedal Zone 

Demo by CIOKS 

DC 7

Das Empress Effects Bass ParaEq ist ein hochwertiges analoges parametrisches Equalizer- und Boost-Pedal, das speziell für Bassisten entwickelt wurde, die präzise Klangkontrolle suchen. Es verfügt über drei vollständig einstellbare parametrische EQ-Bänder mit variabler Q und ermöglicht eine Anhebung oder Absenkung von ±15 dB. Das Pedal beinhaltet Hochpass-, Tiefpass-, Tiefen- und Höhen-Shelving-Filter, die umfassende Frequenzformungsmöglichkeiten bieten. Ein fußschaltbarer Boost bietet bis zu 30 dB sauberen Gain, und das Pedal arbeitet intern mit 27V für außergewöhnlichen Headroom. Weitere Funktionen sind ein wählbarer 10MΩ Hi-Z-Eingang für Piezo-Tonabnehmer und ein automatisch erkennender symmetrischer Ausgang, was es sowohl für Live- als auch Studioanwendungen geeignet macht.

The Empress Bass ParaEq is the only parametric EQ pedal on the market built from the ground up for bass. It gives players studio-grade tone shaping in a compact pedal format that is purpose-built for low-end instruments, not just adapted from guitar gear.

Following the success of our Bass Compressor—and after hearing from countless players who were already using the ParaEq MKII Deluxe on bass—we knew it was time to give bassists more than a “good enough” EQ. The Bass ParaEq delivers the same transparent, tone-sweetening power that made the Deluxe a favourite, but with frequency ranges, filters, and features tailored specifically for bass.

With a dynamic low shelf, bass-tuned EQ bands, a Hi-Z input for upright players, and an auto-detecting balanced output, it’s built to give bassists the control they’ve always deserved—on stage, in the studio, everywhere.