Darin Grebe


SIGNAL CHAIN

Input

Board Patch Guitar IN

TC Polytune

TWA WR3

MXR CAE Buffer

Boss PW-3 Wah
 
Boss PH-2 Phaser

Ibanez FL99 Flanger



MXR GT-OD

MXR Il Diavolo

TC SCF Gold

Wampler Metaverse Delay

Catalinbread Talisman Reverb
 
MXR M108S EQ

MXR CAE Buffer

Board Patch Out to Amp

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 1 V2 ist eine Pass-Through-Box, die speziell für Gitarristen und Bassisten entwickelt wurde. Du kannst das MOD 1 V2 nutzen um mehrere Pedale deines Setups im Front End und im Effekt-Loop des Verstärkers zu postieren (4-Kabel Methode) oder die vier TRS-Anschlüsse als zentralen Zugang und Ausgang des Boards nutzen. Die XLR-Through-Verbindung kann als Signalausgang vom Pedalboard zum Mischpult oder zur PA verwendet werden.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 5 x 6,3 mm TRS thru
- 1 x XLR thru (männlich vorne / weiblich hinten)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 5 x 6,3 mm / ¼" TRS thru
- 1 x XLR thru (male front / female back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR, IEC & Barrel Patchbay

DG One Stop Rock/Funk Tone Shop

Das Homebrew Electronics (HBE) ParaDrive ist ein vielseitiges Dual-Pedal, das einen hochwertigen Overdrive und einen unabhängigen Clean Boost in einem Gerät kombiniert. Die Overdrive-Sektion basiert auf dem beliebten HBE Power Screamer, jedoch mit Verbesserungen. Es verfügt über einen einzigartigen Tone-Regler, der nur die Höhen beeinflusst, wodurch der oft mit Klangkorrekturen verbundene Verlust tiefer Frequenzen vermieden wird. Die Overdrive-Sektion enthält einen 3-Wege-Diodenauswahl-Schalter für klassische, offene Overdrive-Töne bis hin zu straffer, komprimierterem Gain, sowie einen "FD" (Fat Drive)-Schalter zur Erhöhung der Basspräsenz und des Gains. Die separate Boost-Sektion kann unabhängig verwendet werden, um einen Verstärker für Soli anzutreiben, oder mit dem Overdrive für maximale Sättigung und Obertöne gestapelt werden.

The Homebrew Electronics (HBE) ParaDrive is a versatile dual pedal combining a high-quality overdrive and an independent clean boost in a single unit. The overdrive section is based on the popular HBE Power Screamer but with enhancements. It features a unique Tone control that only affects the treble, avoiding the loss of low-end often associated with tone adjustments. The overdrive section includes a 3-way Diode Selector switch for classic, open overdrive tones to tighter, compressed gain, and an "FD" (Fat Drive) switch for increasing low-end presence and gain. The separate Boost section can be used independently to push an amp for solos or stacked with the overdrive for maximum saturation and harmonics.

Homebrew Electronics

Demo by Aditya Bayu

Demo by Pro Guitar Shop

Review by 

ParaDrive

thuy nguyen

The MXR Gran Torino Boost Overdrive harnesses MOSFET technology to amplify and enrich the natural sound of your rig with the the warm, organic sound of classic tube amps—and it comes with a simple-yet-effective set of controls to shape its tone to complement your setup. Setup is easy—just dial in your desired Master volume and Gainlevels, fine-tune it all with the 3-band EQ, and then choose your output mode with the BOOST/OD switch: Boost for cleaner notes and rich sustain, OD for smooth, mellow overdrive. On top of that, this pedal uses a Class A Low Impedance Output Driver to preserve the integrity of your sound and prevent signal loss across long FX chains.

Product Page

Gran Torino Boost Overdrive

Tester

Für die Entwicklung des MXR CSP036 Custom Shop Il Diavolo Overdrive konnte sich die amerikanische Effektschmiede die Unterstützung des italienischen Sound-Gourmets Carlo Sorasio sichern, der mit seinen Pedalen und Amps in Boutique-Kreisen einen hervorragenden Ruf genießt. Dementsprechend besticht der MXR Il Diavlolo Overdrive durch den erstklassigen Sound seiner „Hot Rodded“-Schaltung, die über eine erweiterte Bass- und Mittenwiedergabe verfügt und in Verbindung mit den beiden Gain-Modi ein breites Klangspektrum abdeckt. So bietet der Verzerrer nicht nur einen organischen Boost, sondern auch cremigen Overdrive und bissige Verzerrung.

For the development of the MXR CSP036 Custom Shop Il Diavolo Overdrive, the American effects company was able to secure the support of the Italian sound gourmet Carlo Sorasio, who enjoys an excellent reputation with his pedals and amps in boutique circles. Accordingly, the MXR Il Diavlolo Overdrive impresses with the first-class sound of its "Hot Rodded" circuit, which has extended bass and midrange reproduction and, in conjunction with the two gain modes, covers a wide sound spectrum. Thus, the distortion provides not only an organic boost, but also creamy overdrive and biting distortion.

Manual

Demo by GAK

Review by Reddit /guitarpedals

Demo by ProGuitarShopDemos

Review by Audiofanzine

CSP036 Il Diavolo Overdrive

BOSS

Official Website

PH-2 Super Phaser

PedalSafe Type E1

QuickMount Type E

Pedal-Montageplatte für Standard-Boss-Pedale

Pedal Mounting Plate For Standard Boss Pedals

Schutzabdeckung & RockBoard-Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & RockBoard Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Schutzabdeckung & universelle Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & Universal Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Das komplett analog aufgebaute PW-3 liefert professionelle „Wah-Sounds“ in einem robusten und kleinen Gehäuse, das dem Anwender viel Platz auf dem Pedalboard einspart. Von BOSS neu entwickelt, verhindert das PW-3 im “Rich-Mode” den typischen Verlust der Definition und die abgedämpften Bässe klassischer Wah-Schaltkreise. Sollte es doch lieber traditionell sein, schaltet man auf der Rückseite einfach in den „Vintage-Mode“ um den kernigen „Dirty-Sound“ klassischer Wah-Pedale zu ermöglichen.

Ungleich anderer Pedale die, wenn sie verkleinert werden, an Funktionalität und Spielgefühl verlieren, hat das PW-3 die perfekte Balance zwischen praktischer Anwendung und Spieleigenschaft. Das Aluminium Druckgussgehäuse hinterlässt beim Spielen einen soliden und robusten Eindruck unter dem Fuß. Der lange, sanfte Regelweg des Pedals reagiert absolut zuverlässig und fühlt sich einfach gut an. Bei verkleinerten Pedalen sieht man oft nicht, ob sie nun an-, oder aus geschaltet sind. Das PW-3 löst dieses Problem mit Status LEDs auf beiden Seiten, somit erkennt man sofort was Sache ist. Beim PW-3 ist es möglich die Pedalkraft einzustellen. Mit einem Hex-Schlüssel kann man die Stellschraube nach Belieben anziehen oder lockern.

The completely analog PW-3 delivers professional "wah" sounds in a robust and small housing that saves the user a lot of space on the pedalboard. Newly developed by BOSS, the PW-3 in "Rich Mode" prevents the typical loss of definition and the muffled bass of classic wah circuits. If you prefer it to be traditional, you can simply switch to "vintage mode" on the back to enable the robust "dirty sound" of classic wah pedals.

Unlike other pedals that lose functionality and feel when scaled down, the PW-3 strikes the perfect balance of practicality and playability. The die-cast aluminum chassis feels solid and sturdy underfoot while gaming. The long, gentle control travel of the pedal reacts absolutely reliably and simply feels good. With smaller pedals, you often cannot see whether they are switched on or off. The PW-3 solves this problem with status LEDs on both sides, so you can immediately see what's going on. With the PW-3 it is possible to adjust the pedal force. A hex key can be used to tighten or loosen the set screw as desired.

Demo by Sweetwater

Official Product Video

Review by Guitar Mission

PW-3 Wah Pedal

Andreas  Furtner

Das Wampler Syntax ist ein multifunktionales Fernbedienungspedal, das entwickelt wurde, um Ihr Setup zu vereinfachen und Ihnen vollständige Kontrolle über Ihre MIDI-fähigen Geräte zu geben. Trotz seiner kompakten Größe bietet es eine beeindruckende Palette an Funktionen, von der Auswahl von MIDI-Programmen bis hin zu Tap-Tempo und Amp-Kanalumschaltung. Es ist die perfekte Lösung für Musiker, die die Leistung eines dedizierten MIDI-Controllers wünschen, ohne wertvollen Platz auf dem Pedalboard zu beanspruchen.

The Wampler Syntax is a multifunctional remote control pedal designed to simplify your rig and give you complete control over your MIDI-enabled devices. Despite its compact size, it packs an impressive array of features, from MIDI program selection to tap tempo and amp channel switching. It’s the perfect solution for musicians who want the power of a dedicated MIDI controller without taking up precious pedalboard space.

Wampler

Syntax Dual Multiswitch

David Litaba

Comprising eleven of Brian Wampler’s favorite delays, the Metaverse is a full-featured, small-footprint stomp box that is fully programmable, preset capable, has stereo inputs and outputs, allows full MIDI control, and has an expression input that you can assign to ANY of the parameters.

Just like the Terraform that came before it, the Metaverse is an advanced, feature-packed pedal that allows you to navigate its settings without endless menus on a tiny display. Use the intuitive user interface or a separate MIDI controller to effortlessly traverse Wampler’s Metaverse of rich, expansive delay tones.

Review by bonedo

Review by Sound on Sound

Review by guitar pedal X

Review by That Guitar Lover

Demo by Bernd Kiltz - Gitarrenvideos

Demo by gilmourish

Demo by Home Studio SImplified

METAVERSE

Catalinbread’s Talisman plate reverb is touted as a homage to the plate reverbs of the 70s, famously used on Pink Floyds iconic Dark Side of the Moon album. To clarify, according to Musician on a Mission, plate reverb is “a clever way of imitating the way sound reverberates through a room. Plate reverb units are big, enclosed cases. Hanging inside of the case is a thin metal sheet, aka the “plate.” When a sound is played into a plate reverb unit, vibrations inside of the case create the illusion of reverb“.

Catalinbread

Demo by Reverb 

Demo by Catalinbread Effects

Review by Guitar Fella 

Review by BK Pedal Reviews 

Talisman

PedalSafe Type A1.1

QuickMount Type A

Pedal-Montageplatte für Standard-Einzelpedale

Pedal Mounting Plate For Standard Single Pedals

Schutzabdeckung & RockBoard-Montageplatte für MXR® Standardgröße und Dunlop® Echoplex Delay Pedale

Protective Cover & RockBoard Mounting Plate For MXR® standard size and Dunlop® Echoplex Delay pedals

Schutzabdeckung & universelle Montageplatte für MXR® Standardgröße und Dunlop® Echoplex Delay Pedale

Protective Cover & Universal Mounting Plate For MXR® standard size and Dunlop® Echoplex Delay pedals

Super-funky, erstaunlich vielseitig, völlig wycked – der TWA WR-03 bringt den legendären Klang des Wah Rocker® zurück, damit ihn jeder erleben kann! Selbst wenn Sie noch nie vom Guyatone Wah Rocker® gehört haben, kennen Sie ihn garantiert. Diese winzige Funk-Maschine ist das Geheimwaffe zahlloser Profis und wurde von solchen Größen wie Guthrie Govan, Lenny Kravitz, Stevie Salas, David Torn, Bill Laswell, TM Stevens, Everlast und Powerman 5000 eingesetzt, um nur einige zu nennen. Als Guyatone 2013 die Produktion des WR-3™ einstellte, stiegen Nachfrage und Vintage-Preise in schwindelerregende Höhen. Totally Wycked Audio hat das geliebte “Duck Box” nun für die Massen neu aufgelegt. Der TWA WR-03 Wah Rocker® basiert auf der Originalschaltung des WR-3™ und liefert das quietschende, geschmeidige Funk-Filtering des Originals, ergänzt um mehrere Verbesserungen für erhöhte Funktionalität und Performance. Neben den klassischen Threshold- und Decay-Reglern bietet der WR-03 einen Range-Regler zur Feinabstimmung des Filterbereichs, einen Gain-Regler für Ausgabeverstärkung, einen stufenlos einstellbaren Blend-Regler für einen druckvolleren Bassbereich und mehr Klangvielfalt sowie einen Guitar/Bass-Schalter für den Sound des Guyatone BR-2 Bottom Wah Rocker®. Zudem verwendet das Pedal TWAs firmeneigenes S3™ “Shortest Send Switching” – eine Form des True Bypass mit elektronischen Relais und mechanischem Schalter, für den transparentesten Bypass-Klang. 

Super-Funky, amazingly versatile, totally wycked—the TWA WR-03 brings the legendary sounds of the Wah Rocker® back for everyone to enjoy and employ! Even if you’ve never heard of the Guyatone Wah Rocker®, you’ve definitely heard it. A secret weapon of countless pros, this diminutive funk machine has been used by such luminaries as Guthrie Govan, Lenny Kravitz, Stevie Salas, David Torn, Bill Laswell, TM Stevens, Everlast, and Powerman 5000, just to name a few. When Guyatone ceased production of the WR-3™ in 2013, demand for the Wah Rocker® went through the roof, and so did the prices on the vintage market. In an effort to bring the Funk to the masses, Totally Wycked Audio has resurrected the beloved “Duck Box” in an all-new device. Introducing the TWA WR-03 Wah Rocker®! Based on the original WR-3™ circuit, it nails the squawky, slippery, super-funked-up filtering of the Guyatone version while adding several updates that greatly improve functionality and performance compared to the original. In addition to the standard Threshold and Decay controls, the WR-03 features a Range control for fine-tuning the filter sweep band, a Gain control for output boost, a continuously variable Blend control for beefier bottom-end and tonal variety, and a Guitar/Bass switch to access the Guyatone BR-2 Bottom Wah Rocker® sound. The pedal also employs TWA’s proprietary S3™ “Shortest Send Switching,” a form of True Bypass using electronic relays and a mechanical switch to ensure the most transparent bypass tone available.

Twa - Totally Wicked Audio

Review by Premier Guitar

Demo by Brett Kingman

Demo by Pro Guitar Shop Demos

Wah Rocker WR-3

The MXR Ten Band Graphic EQ gives players
huge amounts of tone shaping and level control
in a bullet-proof enclosure. This pedal has
been upgraded with noise-reduction circuitry,
true bypass switching, a lightweight aluminum
housing, and a second output so you can run two
separate signal chains. With ten carefully chosen
frequencies and both input and output level
controls, the Ten Band EQ will let you tune your
bass or guitar rig to any room in seconds. 

Review by

Demo by PMTVUK

M108S 10 band EQ [silver version]

QuickMount Type D

Pedal-Montageplatte für große horizontale Pedale

Pedal Mounting Plate For Large Horizontal Pedals

When you run your signal from your instrument to your amp though long cables and/or through a large array of effects with varying impedance, there's bound to be some signal degradation. Placing the CAE Buffer in your signal chain addresses this issue.

It's a low-noise buffer in a small, rugged housing; it can add up to +6dB of gain with the front-facing gain slider; it makes up for signal loss that can occur when combining effects with different impedance levels; it fine-tunes signal recovery with Hi and Lo cut switches; it has an extra output for a tuner, separate effects chain or amp, and can be set to receive either a buffered or unbuffered signal; it also features a convenient 9VDC power output jack which provides power for another pedal.

The CAE Buffer is truly a mighty utility with a small footprint—an ideal addition to any effects rig or pedalboard!

Review by The Gear Page

Review by Talk Bass.com

User Manual 

Demo by Psyckadeli TV

MC406 CAE Buffer

Matthew Felgate

Das Ibanez FL99 Classic Flange ist ein dualer analoger Flanger, der von 1997 bis 1999 produziert wurde und den begehrten MN3210-Chip im Inneren verwendet. Es bietet eine breite Palette von Flanging-Effekten, von subtiler Modulation bis hin zu intensiven jet-ähnlichen Schwüngen. Das Pedal verfügt über Regler für Speed, Depth, Manual und Regen, die eine präzise Formung des Flanger-Sounds ermöglichen. Ein Intense-Fußschalter bietet zusätzliche Klangvariationen, während der Filter-Schalter die Wahl zwischen dem Abtasten aller Frequenzen oder dem Fokussieren auf tiefe bis mittlere Töne ermöglicht. Das FL99 ist bekannt für seinen warmen analogen Klang und seine Vielseitigkeit, was es zu einem begehrten Stück unter Flanger-Enthusiasten macht.

The Ibanez FL99 Classic Flange is a rare flanger produced from 1997-1999 by Ibanez featuring the desireable MN3210 chip at the core of its design. The pedal has controls for speed, depth, manual, regeneration, a filter switch (similar to Eric Johnson's sound on 'High Landrons') and an 'intense' footswitch. Unit has true bypass (bypass works when the unit does not have power).

Ibanez

Review by Die Klangwerkbank

Review by The Hrley Benton Club

Manual download

Demo by no.op

Demo by The Pedal Picassos

FL99 Classic Flange

Der legendäre STEREO CHORUS FLANGER war das erste Produkt von TC Electronic. Überhaupt! Unser Gründer, der auch Musiker ist, ärgerte sich in den 70er Jahren über die Qualität der verfügbaren Effektpedale - sie waren einfach zu laut. Also machte er sich als Ingenieur daran, ein Pedal zu entwickeln, das seinen Erwartungen und hohen Ansprüchen gerecht werden würde. So wurde 1976 das SCF geboren, und der Rest ist Geschichte, wie man so schön sagt. Aber hey! Niemand hat gesagt, dass die Geschichte zu Ende ist. Im Gegenteil, wir schreiben diese Geschichte weiter. Tatsächlich hat sich der Kreis geschlossen und wir treten in eine neue Ära der SCF-Geschichten ein. Darf ich vorstellen: SCF GOLD - ein legendäres Pedal! 

The legendary STEREO CHORUS FLANGER was the first TC Electronic product. Ever! Our founder, who is also a musician, was annoyed with the quality of effect pedals available back in the 70s – they were just so noisy. So, being an engineer, he set out to design a pedal that would live up to his expectations and high standards. That was how the SCF was born all the way back in 1976, and the rest is history as they say. But hey! No one said the story was over. On the contrary, we’re adding to that history. In fact, it has come full circle and we’re really entering a new era of the SCF tales. Please meet SCF GOLD – a legendary pedal to be! 

TC Electronic

Review by reddit /guitarpedals

Demo by Chords of Orion

SCF GOLD

QuickMount Type C

Pedalmontageplatte für große vertikale Pedale

Pedal Mounting Plate For Large Vertical Pedals

When it was introduced in 2010, the original POLYTUNE forever revolutionized the way musicians tune their instruments. Praised by professional and amateur players, guitar tuning instantly became as simple as Strum - Tune - Rock! So how do you make the best-selling polyphonic tuner even better? You take it to the next level by: providing multiple tuning modes, including polyphonic, chromatic, strobe and a variety of altered tunings; adding an onboard BONAFIDE BUFFER to preserve your tone over long cable runs and pedal board signal paths; and upgrading the LED display for even higher tuning accuracy. Say hello to your next tuner – POLYTUNE 3.

Review by Charleston Classical Guitar

Review by musicradar

Demo by American Musical Supply

Demo by Addicted to Gear

Demo by realbeal

Polytune 3

PedalSafe Type G

QuickMount Type G 

Pedal-Montageplatte für Standard TC Electronic Pedale

Pedal Mounting Plate For Standard TC Electronic Pedals

Schutzabdeckung & RockBoard Montageplatte für Standard TC Electronic Pedale

Protective Cover & RockBoard Mounting Plate For Standard TC Electronic Pedals

Schutzabdeckung & universelle Montageplatte für Standard TC Electronic Pedale

Protective Cover & Universal Mounting Plate For Standard TC Electronic Pedals

Für 9-15 FX-Pedale, 1 MOD-Slot - **622 x 330 mm / 24.49" x 12.99"** - erhältlich mit Gig Bag oder Flight Case

For 9 - 15 FX pedals, 1 MOD slot - **622 x 330 mm / 24.49" x 12.99"** - available with Gig Bag or Flight Case

Daniel Marshall

5 String $$

New Pedal Board

Electro-Harmonix

BASS MONO SYNTH

PedalSafe Type C

Schutzabdeckung & RockBoard-Montageplatte für große vertikale Pedale

Protective Cover & RockBoard Mounting Plate For Large Vertical Pedals

Schutzabdeckung & universelle Montageplatte für große vertikale Pedale

Protective Cover & Universal Mounting Plate For Large Vertical Pedals

The Analog Chorus uses bucket-brigade circuitry to create classically lush, liquid textures that you just can't get with digital circuitry. Rate, Level, and Depth controls, as well as knobs for cutting High and Low frequencies allow ultimate tone control. Like all MXR pedals, the Analog Chorus comes in a heavy-duty housing with durable jacks and switches for a lifetime on the road. 

Demo by The Gear Cage

M234 Analog Chorus

The MXR Bass Envelope Filter delivers classic analog envelope filter sounds in an easy-to-use and compact pedal designed specifically for bass. Separate Dry and Effect controls let you dial in the perfect mix of effected and direct signals, so you can bring the funk without losing the low end. Its wide range of filter tones can be shaped with the Decay and Q controls, and a simple twist of the Sensitivity knob can tailor the pedal for your attack—as well as adjust for passive or active basses. The Bass Envelope Filter's power supply circuitry is designed to withstand over-voltage or polarity mishaps, and its true-bypass switching preserves your tone in bypass mode. It's all packaged in a durable, lightweight, Phase 90-size aluminum housing for the ultimate in portability and pedalboard space-saving dimensions.

Demo by The Bass Chanel

Demo by Bass Whisperer TV

M82 Bass Envelope Filter

Kompressor Pedal für E-Bass
CHT "Constant Headroom Technology" für klare und saubere Tonqualität
Regler für Output, Input, Release, Attack und Ratio 
Led Kette mit 10 LED für "Gain reduction" Anzeige
Status-LED
True Bypass
stabiles Metallgehäuse
Betrieb mit 9V-Batterie oder Dunlop ECB-003 AC Adapter (optional)
Made in USA


Take your favorite studio compressor to the stage with the MXR M87 Bass Compressor. A complete array of controls (Attack, Release, Ratio, Input, and Output) makes it easy to fine-tune your sound, from subtle peak limiting to hard squashed compression effects. Its Constant Headroom Technology gives you plenty of headroom and clear performance. This totally transparent compressor allows your full dynamic range to shine through until your signal reaches the compression threshold, which is indicated by the ten, highly visible gain-reduction status LEDs. It´s all packed into a durable, lightweight aluminum-housing pedal that´s the size of a Phase 90.

Official Product Page

Review by awkwardsounds

Review by PREMIER Guitar 

Review by Compressor PedalReviews

Official Product Video 

Demo by Bass The World 

M87 Bass Compressor

Mike Matthews, der Gründer von Electro-Harmonix, ist eine schillernde Figur. Die Hippie-Bewegung und die Evolution der E-Gitarre durch Jimi Hendrix diente ihm als Katalysator für die Entwicklung des bis heute populären Big Muff Verzerrers. Nach phänomenalem Wachstum seiner Firma in den goldenen Zeiten des Rock’n´Roll, den 1970er Jahren, folgte Anfang der 1980er die Ernüchterung – und schließlich die Pleite.

Mike Matthews, the founder of Electro-Harmonix, is a colorful figure. The hippie movement and Jimi Hendrix's evolution of the electric guitar served as a catalyst for him to develop the Big Muff distortion unit, which is still popular today. After phenomenal growth of his company in the golden age of rock'n'roll, the 1970s, disillusionment followed in the early 1980s - and finally bankruptcy.

Review by guitarfella.com

Review by Oliver Poschmann, bonedo.de

Demo by FrostByte

Bass Big Muff Pi

Shure

New Pedal

BLX4

The TU-3—the world’s best-selling stage tuner—unites trusted BOSS tuning technology with our iconic compact pedal format. Top performers everywhere rely on this robust stomp for fast and flawless tuning night after night, thanks to its high-visibility meter, simple operation, and road-tested durability. The versatile TU-3 also includes a mute function, tone-saving buffer, and power distribution capabilities, making it an essential utility tool for every player.

Demo by Equipboard

Review by reddit /Guitar

Review by Musiker-Board

Review by The Gear Check

TU-3 Tuner

Für 5-10 FX-Pedale, 1 MOD-Slot - **442 x 236 mm / 17.40" x 9.29"** - erhältlich mit Gig Bag oder Flight Case

For 5 - 10 FX pedals, 1 MOD slot - **442 x 236 mm / 17.40" x 9.29"** - available with Gig Bag or Flight Case

Thomas & Simone RhPf Electronics

Lenny, frontman of M.O.T.H.E.R. from Biel/Bienne, brings a sound that’s gritty, raw, and full of attitude. With punchy riffs and a voice to match, he builds his core tone by pushing his amp hard—no classic drive pedals needed. Instead, both EQs (BOSS GE-7 and MXR Ten Band) are used as powerful boosts, slamming the amp into that unmistakable, edge-of-breakup tube growl.

Central to his setup is the RhPf Electronics Tri-Hormonic Phalanx. Lenny sets the highs and lows for clean, focused boost, while the mids get dialed in for a crunchy, saturated bite. This lets him carve out punch and clarity, while the midrange cuts through with emotion and grit—never muddy, always bold.

Modulation and color come from the Orange Phaser, BOSS Harmonist, Multi Overtone, and Echoplex Delay, with the Hall of Fame 2 adding depth when needed. Power and routing are handled by the Truetone 1Spot Pro and Radial Catapult.

M.O.T.H.E.R.’s songs are all about storytelling with soul—sometimes chaotic, sometimes beautiful, always real. Lenny’s rig is built for that: flexible, dynamic, and ready to deliver every shade of feeling, from heartbreak to pure rock and roll joy.

M.O.T.H.E.R. - Lenny

PS-6 Harmonist

MO-2 Multi Overtone

The Echoplex EP-3 tape echo unit is famous for its deliciously warm, organic modulation and sweet musical voice—a key component to some of the most iconic guitar tones from the '70s onward. The original EP-3 units, however, are expensive, temperamental, and larger than a VCR.

That's where the EP103 Echoplex Delay comes in. It's the size of a Phase 90, and it delivers the EP-3's legendary tones with a simple control interface and a hi-fi all-analog dry path. The Delay control sets the time between repeats—from 65ms to 750ms—the Sustain control sets the number of repeats, and the Volume control sets the output level of your repeats.

Dunlop

Review by Gitarre & Bass

Review by Premierguitar

Demo by Guitarist

EP103 Echoplex Delay

Vincent  Raillard

TC ELECTRONIC ist ein Synonym für einige der bestklingenden Reverbs auf dem Markt - denken Sie an einen Song mit Hall, den Sie in den letzten 20 Jahren gehört haben, und die Wahrscheinlichkeit ist groß, dass er von uns stammt. Wir sprechen hier von Michael Jackson über Dire Straits bis hin zu Lady Gaga und zurück und allem, was dazwischen liegt. Wir haben die ikonischen Hallsounds, die du kennst und liebst, in einem kleinen Paket zusammengefasst, das einfach so wahnsinnig gut klingt, dass du es ausprobieren musst.

The original HALL OF FAME REVERB delivered some of the most-iconic reverb sounds of all time, but HALL OF FAME 2 REVERB extends that legacy of innovation dramatically. Essentially, HALL OF FAME 2 REVERB’s incredible MASH technology adds an expression pedal to a world-class reverb stompbox that not only responds to your touch and saves precious pedalboard space – but blends the celestial world of reverb with the ultimate in personal expression. Add a scintillating new Shimmer effect, and you've got a reverb pedal unlike any other – the awe-inspiring HALL OF FAME 2 REVERB!

The HALL OF FAME 2 REVERB features groundbreaking new technology that brings a wide range of creative expression to the party, controlled solely by how much pressure you apply to the depressed footswitch. Years in the making, and only available in select
TC ELECTRONIC products, this clever innovation elevates the common footswitch well above rather mundane duties, such as “On” and “Off”. More importantly – MASH elevates your performance to the next level.

Product Video 

Demo by TC Electronic 

Demo by Prymaxe 

Demo by Mike Hermans 

Product Page 

Review by MIXDOWN 

Review by AMAZONA 

Hall of Fame 2

Hartwig Rohde

IT LITERALLY HAS ONE JOB

When you have a specific job that needs doing, the solution is obvious: you hire a specialist. And when you want to add a classic phaser effect to your sound, it’s the same deal: you want a pedal that does exactly that, and only that. No muss, no fuss, no superfluous bells and whistles — and, crucially, zero intrusions on that sweet psychedelic swirl.