Sebastian Sese

Effect pedalboard MIDI controllable and with redundancies.

This pedalboard can be accessed by two different guitar players. Since I am left handed and Thomas (usually main vocals) is right handed, i wanted to make sure that everyone has a seperate way of entering the board with the ability to connect any wireless system and a quick way to connect their own guitar quickly to a dedicated input, so a quick change is still possible, without unplugging my or his guitar. So if we have to swap spots (and i am going to be main vocals for a few songs), a midi bank can be loaded via the wirelessly connected MIDI board, that switches my guitar setup to his via the OSC ABY and loads presets that he might need for/disengages effects in the chain and in the fx loop.

The board itself is actually designed to be placed near the amp, not being operated on stage, but rather remotely controlled via MIDI, since i have broken previous effect pedals through neglect and overuse.

The effects loop of the amp is currently only being used by the 1440 that has looped samples saved and can be started, stopped and manipulated via the MIDI board. The rest of the effects are sitting in between the guitars and the input of the amp, which are all midi controllable. Since the Whammy and the HX One are being used used together often, the pedals are being put next to each other against their actual signal path, so you can engage or disengage both pedals quicker, if necessary.

The OSC Siren is sending the output of the guitar on Output B via a cheap wireless transmitter to the MIDI board, which has a tuner on it.

NOTE: The Looperwerk Mini A/B switches are currently stand ins for the Looperwerk Patchbox Solo switches.

MIDI:

The MIDI signal path is being received from the MIDI board wirelessly via WIDI with the WIDI Jack, which is connected to and powered by the Morningstar Engineering MIDI Box . Since it has TRS outputs, you can encounter ground loop issues if you have multiple output routes (pre amp effect chain + amp effects loop in this case) thanks to that, but this can easily be fixed by using a simple, passive MIDI coupler in between the MIDI outs of the MIDI Box and the receiving pedal.

NOTE: The DOREMiDI USB MIDIHUB and the two Kenton MERGE-4s are just stand ins for signal flow options for either wireless or wired operation.

Redundancies:

If a wireless guitar transmitter/receiver is causing issues, you can just connect your guitar with a wire to the Looperwerk Patchbox Solo, which automatically switches the input to the second input jack, where you plug in the cable. So if only one of the wireless setups is causing issues, either Thomas or me can stay on their current setup without replugging anything. If both systems are causing issues, Thomas and me can just plug our guitars into their designated input jacks.

If WIDI is causing issues, you can just unplug the WIDI jack from the MIDI ports on the MOD 2 and connect MIDI cables to the MIDI board and the amp/digital amp.

If MIDI completely fails, the board can be brought on stage and just be used like a normal pedalboard. The MIDI board has a Lehle Mono Volume S as an expression pedal, which can be detached from the MIDI board and can be inserted into the signal chain via the Looperwerk Patchbox Duo Insert.

Neat:

Since i hand picked every pedal to be MIDI controllable, there is no Loop Switcher needed. I am considering adding one, as soon as if i find a pedal, i cant live without that does not have MIDI.

Surprisingly, even with all the electronics, cable runs etc. the noise floor of the board is almost non-existant, if every effect is turned off.

So far, WIDI has not been an issue on stage. I have played this board in the club, open air and in crowded spaces, yet i did not need to hard wire this setup yet.

Throughout the build, i have switched from classic zip ties to cable organizers by CableGenie. The size of their base is a bit smaller than the spacing of the Rockboard rows themselves, so i can use the whole space way better. They are reusable and if you have to reorganize cables, its not a pain anymore. I hope the silicon band that is holding the cables together will stand the test of time.

Dual Lock is a great improvement versus Velcro / Hook & Loop. IT IS NOT PERFECT, but it is better in every way.

Not So Neat:

Even though MIDI is a matured standard, it can still be a pain. Not because of its "limited" functionality (16 Channels/devices max.), but because of its wide yet limited product variety. The fact that the Morningstar Engineering MIDI Box was the ONLY "affordable" option that was relatively small and can be powered with 9V was frustrating. Not to mention the two different TRS MIDI "standards". Thankfully the MIDI Box also solves that problem. It did not solve the ground loop error though, thankfully that was a cheap fix, which is still in testing though.

I do not understand why the Whammy 5's MIDI configuration is the way it is. I dont know who thought it was a good idea not to implement an on/off toggle via Control Changes, especially since this device has to be CC capable because of the expression pedal functionality.

The worst offender here might be strymon in the MIDI category though. There was literally no information available what kind of standard they use and back when i had a strymon pedal on my board and less knowledge, i was forced to buy one of their cables to get it working through MIDI. Really frustrating.

I wish Rockboard would include a power switch on their C14/C13 passthrough ports of their MODs. I fortunately found a short C13 to C14 (angled) cable that includes one and i know that Rockboard sells those, too, but these cables not flexible and the switch itself is HUGE as well. Cable managing this is hell.



Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 2 V2 wurde als Patchbay speziell für MIDI-basierte Setups, Verstärker und Geräte sowie eine USB-Verbindung zwischen Pedalboard und Computer oder Soundkarte entwickelt. Mit vier TRS-Through-Verbindungen lässt sich das MOD 2 V2 perfekt in True Stereo Setups von Keyboards oder Synthesizern integrieren oder als zentraler Zugang und Ausgang des Boards nutzen. Alternativ lassen sich Effektpedale im Front End und im Effekt-Loop des Verstärkers postieren (4-Kabel Methode).
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 4 x 6,3 mm TRS thru
- 2 x 5-pin DIN MIDI thru
- 1 x USB Type A thru
- 1 x DC 2,1 x 5,5 mm Hohlstecker thru
- 1 x AC IEC thru (männlich vorne / weiblich hinten)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 420 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 2 V2 is a pass-thru box especially designed for MIDI-controlled amplifiers and devices, USB connections to a computer, or a sound card. The 4x TRS thru connections will also work great for true stereo setups with keyboards or synthesizers. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 4 x 6,3 mm / ¼" TRS thru
- 2 x 5-pin DIN MIDI thru
- 1 x USB Type A thru
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 420 g / 0.93 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS, MIDI & USB Patchbay

Effects Pedalboard EYESHOTEMILY (v2 - 2026-09)

ch ray

DOREMiDi

Official Product Video

Product Page

Review by Keyboard Forums

Review by reddit /synthesizers

MIDI HUB-8 Box

Aleksander Golis

Der Kenton MIDI Merge-4 ist ein kompaktes MIDI-Utility-Gerät, das bis zu vier MIDI-Eingangssignale zu einem MIDI-Ausgang zusammenführt. Es ermöglicht mehreren MIDI-Controllern oder Sequencern, ein einzelnes Klangmodul oder Gerät zu steuern. Das Gerät führt MIDI-Daten automatisch ohne Konfiguration zusammen. Es wird über ein Standard-Netzteil betrieben und ist für den zuverlässigen Studio- und Live-Einsatz konzipiert. MIDI-Aktivität wird über LED-Statusanzeigen dargestellt. Die Verbindung erfolgt über standardisierte 5-polige DIN-MIDI-Buchsen.

The Kenton MIDI Merge-4 is a compact MIDI utility that merges up to four MIDI input signals into one MIDI output. It allows multiple MIDI controllers or sequencers to control a single sound module or device. The unit automatically merges MIDI data without the need for configuration. It is powered via a standard DC supply and is designed for reliable studio and live use. MIDI activity is indicated by LED status lights. The device operates with standard 5-pin DIN MIDI connections.

Kenton

MIDI Merge-4

Bass EARl

WIDI Master ist Ihr virtuelles MIDI-Kabel.
Jetzt können Sie alle Ihre MIDI-Geräte verbinden – ohne Kabel – sogar ohne Computer – mit MIDI über Bluetooth!
Genießen Sie ultraniedrige 3 ms Latenz und sichere Konnektivität über Adaptive Frequency Hopping.

WIDI unterscheidet sich von allen anderen verfügbaren Bluetooth-MIDI-Technologien durch seine einzigartige SCA-Technologie.

SCA ist eine Sammlung hochwirksamer Algorithmen, die die Leistung optimieren und Störungen minimieren.

Die Latenz wird auf unhörbare 3 ms reduziert, gemessen zwischen 2 WIDI-Geräten.
MIDI überträgt Daten mit einer Standardrate von 31,25 kbps über Kabel. WIDI-Produkte erreichen bis zu 400 kbps.

WIDI Master is your virtual MIDI cable.
Now you can connect all your MIDI devices - without cables - even without computers - with MIDI over Bluetooth!
Enjoy ultra-low 3ms latency and secure connectivity via Adaptive Frequency Hopping.

WIDI distinguishes itself from any other Bluetooth MIDI technology available through its unique SCA technology. 
SCA is a collection of highly effective algorithms that optimize performance and minimize interference.

Latency is reduced to an inaudible 3ms as measured between 2 WIDI devices.
MIDI transmits data at a standard rate of 31.25 kbps via cable. WIDI products go up to 400 kbps.

Demo by Artesia Pro

Review by bonedo

Review by Morningstar Forum

Review by musicradar

Review by AMAZONA

Manual

Widi Master

A part of a CME Wireless midi system. Accepts Midi on 3,5 mm TRS jacks. Can use USB-C for power, but can also get power from the TRS MIDI connection.

Widi Jack

Maximilian Krainz

• Analoger Signalpfad – digitale Steuerung
• High-End-Preamp mit diskreter Class-A-Eingangsstufe
• 120 dB Dynamik dank 30-V-Technologie
• Magnet-Sensor-Technologie ohne mechanischen Verschleiß
• Präzise Lautstärkeregelung durch analogen VCA
• MIDI via USB
• Optimierte Größe und Gewicht

• Analogue signal path – digital control
• High-end preamp with discrete Class-A input stage
• 120 dB dynamic range thanks to 30 V technology
• Magnetic sensor technology, without mechanical wear
• Precise volume control from analogue VCA
• MIDI via USB
• Optimised size and weight

LEHLE

Demo by shnobel

Review by reddit /guiterpedals

Review by Haiko Heinz, bonedo.de

Mono Volume S

Tester

The Mini A/B Box is available in two versions, these differ only in the arrangement of the sockets, both versions can be used in both directions.
To switch between two guitars, the version with output on the left is recommended, to switch between two amps, the version with input on the right is recommended.

The Mini A/B Box works completely passively. Depending on the switching status, the LED lights up red or blue.

Looperwerk

Mini A/B Box

Daniel Balogh

Der RockBoard ISO Power Block 12 IEC ist ein Multi-Netzteil für Effektgeräte und bietet 12 galvanisch getrennte, hochgradig gefilterte Stromanschlüsse und einen 5V USB-Anschluss. Das Multi-Netzteil wurde entwickelt, um bis zu 12 Effektpedale, auch mit unterschiedlichen Betriebsspannungen, gleichzeitig geräuschlos mit Strom zu versorgen. Die fortgeschrittene Filtertechnologie verhindert wirksam hochfrequente Nebengeräusche. Durch die separate Kurzschlusssicherung werden die angeschlossenen Effektpedale im Falle eines Kurzschlusses vor Beschädigungen geschützt. Separate LED zeigen Kurzschlüsse für jeden einzelnen Anschluss an. Kommt es zu einem Kurzschluss wird lediglich der betroffene Ausgang ausgeschaltet, so dass der reibungslose Betrieb der verbliebenen Anschlüsse weiterhin gewährleistet ist.

The RockBoard ISO Power Block 12 IEC is a multi-power supply for effects pedals with 12 isolated transformers and highly filtered power slots and a single 5V USB output. The multi-power supply was designed for powering up to 12 effects pedals simultaneously without any noise. The advanced filtering technology used in the DC power slots prevents high-frequency noise. Built with individual slot short circuit protection, connected effects pedals are protected in case of a power surge. With a designated LED for each power slot indicating the slot is working correctly, you can quickly identify any problems without losing power to the remaining pedals.

RockBoard

Official Product Page

Pedal Board Online Configurator

ISO Power Block V12 IEC

zach hultstrand

The pedal you are holding is the world’s first Augmented Analog fuzz pedal. Inside, cutting-edge
technology allows you to control, in real time, the behavior of its key internal components.
The MOHO draws inspiration from a range of fuzz classics, spanning both vintage and modern
designs. It infuses futuristic tones into the mix, inviting you on a unique sonic adventure that
combines the finesse and ferocity of renowned analog circuits in an unprecedented way

Kernom

Review by Gitarre & Bass

Review by guitar pedal X

Demo by Mike Hermans

MOHO

Stan Vartanyan

Fully MIDI-controllable stereo volume/pan/tremolo with advanced routing options, onboard LFO and phase invert.

Oscillator Devices

Review by The Gear Page

Siren

Christopher Laliberte

THE SMALLEST MIDI BOX WITH THE MOST OUTPUTS
Designed from the ground up, the Morningstar MIDI Box offers you something special – many more outputs in a much smaller package.

Through a single 5-pin MIDI input, you can split your MIDI signal into

8 independent 3.5mm TRS MIDI outputs.

Your input MIDI signal can also continue to flow via the 5-pin MIDI Thru port. 



Morningstar Engineering

MIDI Box

Electro-Harmonix

1440 Stereo Looper

PedalSafe Type C

QuickMount Type C

Pedalmontageplatte für große vertikale Pedale

Pedal Mounting Plate For Large Vertical Pedals

Schutzabdeckung & RockBoard-Montageplatte für große vertikale Pedale

Protective Cover & RockBoard Mounting Plate For Large Vertical Pedals

Schutzabdeckung & universelle Montageplatte für große vertikale Pedale

Protective Cover & Universal Mounting Plate For Large Vertical Pedals

Der DigiTech Whammy bietet Ihnen dieselben haarsträubenden „Dive Bomb“-Effekte, packenden Pitch Bends und blitzschnellen Harmoniewechseln, die Sie suchen, sowie einige neue Überraschungen. Verändern Sie ganze Akkorde mit der neuen Einstellung für die Tonhöhenverschiebung von Akkorden und führen Sie klassische Single-Note-Bends aus.

The DigiTech Whammy brings you the same hair-raising “dive bomb” effects, gripping pitch bends and lightning harmony shifts you are looking for plus a few new twists. Bend entire chords with the new chordal pitch shifting setting, and execute classic single note bends.

DigiTech

Review by HORN FX

Demo by S19NAL C14AIN

Demo by Leduc's Own Music Shop

Sweetwater Exclusive Product Page

Whammy V

Adzim Ezani

HX® One is a powerful stereo effect pedal in an ultra-compact enclose that easily fits onto any pedalboard. It features intuitive controls, 250+ effects taken from HX family processors, a unique Flux Controller, a jack for connecting an optional expression pedal or two footswitches, adjustable input impedance, MIDI capabilities, and a choice of true or buffered DSP bypass.

LINE 6

Demo by Line 6

HX One

Roberto Beretta

Diese Utility-Einheit fungiert als bidirektionale, passive MIDI-ABY-Box, die für das hochgradig flexible Routing von Mono- oder Stereosignalen konzipiert ist. Die Schaltungsarchitektur verfügt über einen vollständig passiven, relaisbasierten True-Bypass-Signalweg, der klangverändernde aktive Puffer vermeidet. Duale TRS-Klinkenkonfigurationen ermöglichen es Musikern, Stereo- oder Monosignale nahtlos zwischen zwei Instrumenten, Verstärkern oder separaten Multi-Effekt-Pedalketten umzuschalten. Die vollständige digitale Befehlsintegration verarbeitet standardmäßige MIDI-Continuous-Controller- und Program-Change-Befehle, um die Schaltzustände zu steuern und bis zu 128 verschiedene Betriebspresets zu speichern. Ein einzelner, mehrfarbig beleuchteter Taster auf der Vorderseite bietet eine Echtzeit-Visuelle-Überwachung der aktuellen Verbindungszustände und ermöglicht gleichzeitig schnelle Konfigurationsanpassungen.

This utility unit operates as a bidirectional, passive MIDI ABY box designed for highly flexible routing of mono or stereo signals. The circuit architecture features a completely passive, relay-based true bypass signal path that avoids tone-altering active buffers. Dual TRS 1/4-inch jack configurations enable musicians to seamlessly switch stereo or mono signals between two instruments, amplifiers, or discrete multi-effects pedal chains. Full digital command integration handles standard MIDI Continuous Controller and Program Change messages to control switching states and store up to 128 distinct operational presets. A single multi-colored, illuminated faceplate button delivers real-time visual tracking of current connection states while facilitating quick configuration adjustments.

Paul Lengert

Patchbox Duo Insert

Für 7-12 FX-Pedale, 1 MOD-Slot - **470 x 330 mm / 18.50" x 12.99"** - erhältlich mit Gig Bag oder Flight Case

For 7 - 12 FX pedals, 1 MOD slot - **470 x 330 mm / 18.50" x 12.99"** - available with Gig Bag or Flight Case

Entworfen, um die umgekehrte Funktion eines herkömmlichen Boosters auszuführen, reduziert dieses passive Effektpedal den Signalpegel eines Instruments auf eine vom Benutzer festgelegte Einstellung, ohne dabei dank einer einstellbaren Höhen-Bleed-Schaltung an Höhenklarheit einzubüßen. Untergebracht in einem langlebigen Metallgehäuse, verfügt es über eine hochohmige Topologie, die darauf ausgelegt ist, jeden einkanaligen Verstärker durch den Druck auf einen Fußschalter in ein mehrkanaliges Setup zu verwandeln, indem von einem übersteuerten Sound auf einen Clean-Sound gewechselt wird. Es ist mit einer True-Bypass-Schaltung ausgestattet und kann zudem als A/B-Schalter dienen, um zwei separate Gitarren mit unterschiedlichen Ausgangspegeln zu verwalten. Strom wird ausschließlich zur Versorgung der Status-LED auf der Vorderseite des Geräts benötigt.

Designed to perform the opposite function of a traditional booster, this passive utility pedal reduces an instrument's signal level to a user-defined setting without sacrificing high-end clarity via an adjustable onboard treble-bleed circuit. Built into a durable metal chassis, it features a high-impedance topology intended to turn any single-channel amplifier into a multi-channel setup by transitioning from an overdriven tone to a clean sound at the stomp of a switch. It incorporates true bypass switching and can double as an A/B switch for managing two separate guitars with differing output levels. Power is required exclusively to illuminate the multi-status indicator LED on the face of the unit.

Volume Switch - Anti Booster

Bei diesem Aux-Tap handelt es sich um zwei Doppelfußtaster in einem Gehäuse.

Das linke Fußtasterpaar wird per Stereokabel (TRS) über den Ausgang auf der linken Seite an den zu steuernden Effekt angeschlossen, das rechte Paar über den rechten Ausgang.
Bei beiden Paaren schaltet der jeweils linke Fußtaster Tip, der rechte Ring.

Es können entweder zwei verschiedene kompatible Effekte gesteuert werden, oder alle vier Fußtaster steuern dasselbe Gerät - Fractal FM3, FC6 und FC12 erlauben den Anschluss von vier externen Fußtastern.

This Aux-Tap is two double footswitches in one enclosure.

The left pair of footswitches is connected to the effect to be controlled via a stereo cable (TRS) via the output on the left side, the right pair via the right output.
For both pairs, the left footswitch switches tip, the right footswitch switches ring.

Either two different compatible effects can be controlled, or all four footswitches can control the same device – Fractal FM3, FC6 and FC12 allow the connection of four external footswitches.

Aux-Tap Quad

Die Looperwerk Patchbox Solo ist eine kompakte, einkanalige Stereo-Patchbox und Routing-Schnittstelle, die als Eingangs- oder Ausgangszentralen für Pedalboards konzipiert ist. Sie verfügt über ein robustes, pulverbeschichtetes Alugehäuse, das mit hochwertigen Neutrik-Buchsen ausgestattet ist, um die Verkabelung zu vereinfachen, integrierte Buchsen zu schützen und Mono- oder Stereosignale zu verarbeiten. Das vielseitige Design ermöglicht den Einsatz in verschiedenen flexiblen Konfigurationen, darunter ein Wireless-Backup-Bypass, eine temporäre Insert-Schleife, ein Amp-Simulator-Umschalter oder ein TRS-auf-Dual-TS-Signalteiler. Ihre vollständig passive Architektur gewährleistet eine transparente Signalintegrität, ohne dass eine externe Stromquelle erforderlich ist.

The Looperwerk Patchbox Solo is a compact, single-channel stereo patchbox and routing interface designed to function as an input or output hub for pedalboards. It features a robust, powder-coated aluminum enclosure equipped with high-quality Neutrik sockets to simplify cabling, protect onboard jacks, and handle mono or stereo signals. The versatile design allows it to serve multiple flexible configurations, including a wireless backup bypass, temporary insert loop, amp simulator switcher, or a TRS-to-dual-TS signal splitter. Its completely passive architecture ensures transparent signal integrity without requiring any external power source.

Bedienungsanleitung

Patchbox Solo

The Looperwerk Mini Expression Pedal is a compact expression pedal designed to control effects without taking up too much space on your pedalboard. It’s available with different potentiometer values and wiring, making it compatible with various effect pedals. 

Mini Expression Pedal

Erfahre mehr über das Mini A/B Box Switcher-Pedal von Looperwerk auf PedalPedia – der umfassendsten Online-Ressource für Effektpedale ▶️ Offizielle Spezifikationen, Handbücher, Produktvideos und mehr