chris brooks

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 3 V2 ist eine Patchbay für Sänger und Akustik-Musiker. Über die zwei XLR-Ausgänge kannst du ein Stereo-Signal von dein MOD senden und an den XLR-Eingang lässt sich ein Mikrofon anschließen. Mit drei TRS-Through-Verbindungen lässt sich das MOD 3 V2 außerdem als zentraler Zugang und Ausgang des Boards nutzen um zum Beispiel Effektpedale in den FX-Loop eines Verstärkers einzuschleifen.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 3 x 6,3 mm TRS thru
- 2 x XLR thru (männlich vorne / weiblich hinten)
- 1 x XLR thru (weiblich vorne / männlich hinten)
- 1 x DC 2,1 x 5,5 mm Hohlstecker thru
- 1 x AC IEC thru (männlich vorne / weiblich hinten)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel


The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 3 V2 is a pass-thru box designed for use by vocalists and acoustic players. The 2x XLR outputs allow you to send a stereo signal from your MOD and the 1x XLR input can be used to connect your microphone. You can also use it to run several pedals from your board through the effects loop of your amp, or simply use the MOD as a central access point to your pedalboard.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 3 x 6,3 mm / ¼" TRS thru
- 2 x XLR thru (male front / female back)
- 1 x XLR thru (female front / male back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR Patchbay for Vocalists & Acoustic Players

UA Praise and Blues Board

Tester

BOSS

BD-2W Blues Driver (Waza Craft)

PedalSafe Type E1

QuickMount Type E

Pedal-Montageplatte für Standard-Boss-Pedale

Pedal Mounting Plate For Standard Boss Pedals

Schutzabdeckung & RockBoard-Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & RockBoard Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Schutzabdeckung & universelle Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & Universal Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Scott Smith

The miniFUZZ V2 combines the tones and options of both the miniFUZZ Si and the miniFUZZ Ge, giving you the option to switch between the distinctive  tones of silicon or germanium. The miniFUZZ has a plethora of controls  which allow you to dial in authentic vintage silicon or germanium  tones and much more! The side Dip-Switch gives fast and easy access to the amazing new tonal options.  We have added a switchable  buffer to the miniFuzz. If you chose to engage the buffer you will be able to drive long cables and complex pedal setups with no loss of tone or change of tone when engaging  the miniFUZZ. We have added a four setting tone control for tweaking the texture of the fuzz. Leave it off for bright gritty tones or select one of the options for a smoother, silkier tone.  We still have controls for boosting the output or lifting the bass response. Most fuzz pedals can sound poor when using an external DC power-supply but the  miniFUZZ’s built in battery simulator makes sure all DC plug in power sounds as good and as quiet as a battery.

KingTone

Product Page

Review by

Review by delicious audio

Manual

Demo by Buddy Blues

Official Product Video

Mini Fuzz V2 (Black Panel)

Stéphane COMBET

The Duellist features top mounted jacks, 9-18v DC, you can run it at 12 or 18v for more headroom. You can change the channel order A into B or B into A with a simple flick of the switch. Side mounted dip switch allows easy access to powerful tonal options. The new options include an amp-like setting, this gives you an open, tube-amp style tone. The SRV Mod adds attack and dynamics to the classic TS style tones, you’ll probably want to leave this option on once you’ve heard it.. With the Duellist you can also split channel A and B so you can use it with a pedalboard switcher. In ‘Split’ mode, using TRS cables the Duellist functions as two separate pedals with an in and out for each side, this allows you to place the two sides of the Duellist in “different places” on your pedalboard, e.g. you can put other pedals in-between the two sides.

Review by guitar pedal X

Review by Guitar.com

Review by reddit /guitarpedals

Demo by R.J. Ronquillo

Demo by BugBryan

The Duellist Silver

Isaac Goldstein

Das UAFX Dream '65 Reverb Amp Pedal liefert Dir den unverkennbaren amerikanischen Röhrenverstärker, der seit 60 Jahren von Künstlern und Produzenten verwendet wird, von Muddy Waters über die Beatles bis hin zu Mac Demarco.
Aufbauend auf leistungsstarker Dual-Engine-Verarbeitung und erstklassigem UAD-Modeling liefert Dream '65 fette Cleans, sanften Breakup und traumhaften Federhall und Vibrato.

The UAFX Dream '65 Reverb Amplifier pedal gives you the essential American tube amp used by artists and producers for 60 years, from Muddy Waters to The Beatles to Elvis Costello.
Built on powerful dual-engine processing and UAD audio modeling expertise, the Dream '65 effects pedal delivers bold cleans, sweet breakup, and divine spring reverb and vibrato.

Universal Audio

Demo by TomoFujitaMusic

Dream '65 Reverb-Amp

QuickMount Type N

Pedal-Montageplatte für TC Harmony Singer 2, Duplicator & MicMechanic Pedale

Pedal Mounting Plates for TC Harmony Singer 2, Duplicator & MicMechanic pedals

dewey hwang

Das UAFX Ruby ’63 ist das dritte Amp-Modeling-Pedal aus dem Hause Universal Audio und widmet sich der präzisen Nachbildung eines Vox AC30 aus der JMI-Ära der 1960er-Jahre. Drei Kanäle stehen zur Verfügung und natürlich auch eine Nachbildung des typischen Vibrato/Tremolo-Effekts. Dazu gibt es diverse Boost-Funktionen und auf der Lautsprecherseite stehen sechs verschiedene Cabs zur Auswahl.

I know that Universal Audio did a good job of capturing the spirit of an AC30 in the UAFX Ruby ’63 amp emulation, because excitement is the first thing I felt. The Ruby ’63 is lively, explosive, reactive, clear, and, yeah, even pretty chimey. And I was very impressed at how it imparted those qualities to decidedly non-Vox-y black-panel Fender amps, and vintage Fender cabinet emulations in UA’s OX Amp emulator. You know how a lot of pedals claiming to be an amp-in-a-box tend to be vaguely similar in terms of EQ and gain structure, but miss the details? The Ruby ’63 is not that. It’s an exhaustively executed emulation that takes you several miles further down the road to true amp-ness. And it sounds and feels awfully close to the real thing.

Review by PREMIER Guitar 

Review by Gitarre & Bass 

Review by AMAZONA 

Review by bonedo 

Demo by Vintage king 

Demo by SweetWater 

Demo by session 

Ruby '63

Gaun Cochran

Das UAFX Woodrow '55 Instrument Amplifier Pedal liefert Dir die legendären amerikanischen Tweed Röhren Amp Sounds, die von Künstlern und Produzenten seit Jahrzehnten verwendet werden, von den Eagles über Chuck Berry bis zu Neil Young.

The Woodrow ’55 feels more like an amp than a drive pedal, which is how most lesser, analog amp-in-a-box pedals feel at the end of the day. It’s not inexpensive. This is a high-quality pedal with a lot of research and development behind it. But if you thirst for the sonic sensations, thrills, and expressiveness of a tweed Deluxe and are reticent to pay the price in dollars or space, the Woodrow’s ability to span the expanse between a pedal solution that comes up short and the real deal makes the price look, in practical terms, like a real bargain.

Demo by Vintage King 

Demo by Universal Audio 

Woodrow

GREGORY GUENEAU

Enigmatic '82 Overdrive Special Amp gives you the heavenly guitar sounds of Stevie Ray Vaughan, John Mayer, Robben Ford, Joe Bonamassa, and Carlos Santana.*

Perfectly capturing rare ODS amps spanning 30 years, from 1970’s Santa Cruz designs to later iterations built in LA in the '80s and '90s, Enigmatic '82 gives you the sound of the most elusive guitar amps ever made.

Demo by EytschPi42

Review by The Gear Page

Review by The Gear Forum

Review by musicradar

Review by bonedo

Manual Page

Enigmatic '82 Overdrive Special Amp Pedal

UAFX Astra Modulation Machine führt Dich tiefin die Welt der klassischen analogen Modulation und bietet die klanglich authentischsten Bucket-Brigade Chorus/Vibrato, Studio Flanger/Doubler und röhrenbetriebenen Tremolo Effekte, die jemals in einer einzigen Stompbox untergebracht wurden.

Aufgebaut auf unserem leistungsstarken neuen UAFX-Dual-Engine-Processing und einem unübertroffenen Maß an eigenwilligem, analogem Realismus, liefert Astra süchtig machende Vintage-Modulationen, die Dich jahrzehntelang inspirieren werden.

Universal Audio has taken a selection of their finest DSP-powered emulations of classic effects and packed them into thoughtfully designed, ultra-robust guitar pedals that are a tone chaser’s dream come true.

The Universal Astra Modulation Machine puts three legendary modulation effects at your feet — a bucket-brigade chorus, a flanger/doubler, and a vintage amp tremolo — all of which uncannily bottle realistic analog character and vibe. With true bypass switching and an optional buffered bypass, the Astra Modulation Machine keeps your core tone intact, while allowing you to layer on swathes of gorgeous modulation.

Plus, the Astra Modulation ups the ante on all of these effects, offering stereo and dual-mono operation and a preset mode to store your favorite settings and switch between effects during a performance. With its unmatched sonic authenticity, the Universal Audio Astra Modulation Machine pedal is bound to become your new favorite pedal for infusing your playing with warbles, wobbles, and wash!

Review by AMAZONA

Demo by Vintage King

Astra Modulation Machine

Schnall Dich an und begib Dich auf eine klangliche Zeitreise mit der UAFX Starlight Echo Station, mit atemberaubende Emulationen klassischer Bandechos, Bucket Brigade und Digital Delays in einer einzigen, extrem leistungsstarken Stompbox.

Basierend auf futuristischem UAFX Dual Engine Processing und der unnachgiebigen klanglichen Präzision setzt Starlight neue Maßstäbe für Delay-Effekte, die über Jahrzehnte hinaus in die weitesten Bereiche Deiner Vorstellungskraft reisen werden.

Fasten your seatbelts for sonic time travel with UAFX Starlight Echo Station, featuring jaw-dropping emulations of classic tape echo, bucket-brigade, and digital delay units in a single, uber-powerful stompbox. 

Built upon futuristic UAFX dual-engine processing and unflinching sonic accuracy, Starlight sets a new benchmark in delay effects, beautifully crafted to travel the farthest reaches of your imagination for decades to come. 

Review by TAPE OP

Manual Pages

Demo by  Andrew Cheng - Guitarist

Starlight Delay

Mit mehr als 20 Jahren an Expertise im Bereich Reverb-Modeling legt Dir UAFX Golden Reverberator ein Trio der besten legendären Reverbs direkt zu Füßen. Der röhrenbetriebene Federhall klassischer Gitarrenverstärker der 60er Jahre. Der dichte und eindringliche Klang von 50er Jahre Studio Plate-Reverbs. Das unendliche algorithmische Wunder der frühen digitalen Reverb-Hardware.

Basierend auf dem leistungsstarken UAFX Dual Engine Processing und einem noch nie dagewesenen Maß an klanglicher Authentizität ist der Golden Reverberator ein kompromissloses Flaggschiff Hallgerät, das Dich jahrzehntelang inspirieren wird.

Harnessing more than 20 years of reverb modeling expertise, UAFX Golden Reverberator puts a trio of iconic reverbs right at your feet. The tube-driven spring reverb of classic ’60s guitar amps. The dense and haunting sound of ’50s studio plate reverbs. The endless algorithmic wonder of early digital reverb hardware.

Built upon powerful UAFX dual-engine processing and unprecedented levels of sonic authenticity, Golden Reverberator is a flagship, no-compromise reverb unit, built to inspire you for decades

Review by Sam Goffen, samgoffenguitar.com

Review by Thomas Dill, bonedo.de

Demo by Kris Barocsi

Demo by Mattjew Kelly

Golden Reverberator

Für 7-12 FX-Pedale, 1 MOD-Slot - **470 x 330 mm / 18.50" x 12.99"** - erhältlich mit Gig Bag oder Flight Case

For 7 - 12 FX pedals, 1 MOD slot - **470 x 330 mm / 18.50" x 12.99"** - available with Gig Bag or Flight Case

Florent BARRERE

Strat

Die RockBoard® MOD 5 Cab SIM + DI Patchbay bietet wählbare, IR-basierte Stereo-Lautsprecher Simulation, eine aktive DI-Box, sowie eine einfache Lösung, um alle Verbindungen zu und von deinem Effekt Setup zu organisieren. Egal, ob du ein RockBoard® oder ein anderes Pedalboard einer anderen Marke verwendest - die MOD 5 eröffnet völlig neue Möglichkeiten. Mit der Speaker-Cab-Simulation und DI kannst du direkt loslegen und hast DEINEN Sound parat, unabhängig davon, welche Backline an der jeweiligen Venue zur Verfügung steht. Du möchtest deine persönliche Lieblings-Cabinet benutzen? Kein Problem, lade eine Impulse Response des Sounds in die MOD 5 und du hast sie überall dabei. Der Patchbay-Teil dient dazu, Verbindungen von unterhalb deines Pedalboards nach vorne zu leiten, um dir einen zentralen Zugangspunkt zu deinem Setup zu geben und deinen Kabelsalat aufzuräumen. Für geräuschloses Üben auf der Straße bietet der MOD 5 auch einen Kopfhörerverstärker mit einstellbarer Ausgangslautstärke.
- Cabinet Simulation & DI Patchbay
- IR basierte Lautsprecher Simulation
- 6 integrierte IRs wählbar
- Unterstützung von zusätzlichen Custom IRs (max. 1024 pts.)
- integrierte aktive DI Box
- Kopfhöhrer Verstärker
- passend für MOD Slots in RockBoard® Pedalboards
- kompatibel mit einer weiten Reihe anderer Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- wählbarer MONO / STEREO Input
- wählbarer UN- / BALANCED Output
- Ground Lift Schalter
- Regler für Phones Volume
- 3 x 6,3 mm TRS Thru
- XLR DI Out
- 6.3 mm Parallel TRS Output
- 3.5 mm Stereo Kopfhöhrer Ausgang mit einstellbarer Lautstärke
- micro USB Anschluss für Firmware Updates und zum Hochladen von Custom IRs
- Stromversorgung via optionalem 9V DC Netzteil, 2.1 x 5.5 mm Hohlstecker, Polarität (-) innen
- Stromaufnahme 300 mA
- Batteriebetrieb nicht unterstützt
- Abmessungen mit Frontplatte (B x T x H) 175 x 85 x 47 mm 
- Abmessungen ohne Frontplatte (B x T x H) 160 x 85 x 33 mm
- Gewicht 470 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The RockBoard® MOD 5 Cab SIM + DI Patchbay offers customizable, IR-based stereo speaker cabinet simulation, an active DI box, as well as a simple solution to organize all the connections to and from your effects setup. Whether you are using a RockBoard® or any other brand pedalboard - the MOD 5 will open completely new possibilities. The speaker cab simulation & DI let's you go direct, providing YOUR sound, whatever backline is being provided at the venue you're playing. Do you want to use your favorite cab? No problem, load an impulse response of its sound into the MOD 5 and you have it with you, wherever you go. The patchbay part is designed to route connections from underneath your pedalboard to its front, in order to give you a central access point to your setup and tidy up your connections. For silent and on the road practicing, the MOD 5 also provides a headphone amplifier with adjustable output volume.
- cabinet simulation & DI patchbay
- IR-based speaker cabinet simulation
- 6 integrated IRs selectable
- support of additional Custom IRs (max. 1024 pts.)
- integrated active DI box
- headphone amplifier
- fits MOD slots in RockBoard® pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- selectable MONO / STEREO input
- selectable UN / BALANCED output
- ground lift switch
- control for Phones Volume
- 3 x 6.3 mm / ¼" TRS thru
- XLR DI Out
- 6.3 mm / ¼" Parallel TRS output
- 3.5 mm / 1/8" stereo headphone output with adjustable volume
- micro USB connection for firmware updates and loading custom IRs
- power supply via optional 9V DC power adapter, 2.1 x 5.5 mm barrel plug, polarity (-) center
- current draw 300 mA
- battery operation not supported
- dimensions with front plate (W x D x H) 175 x 85 x 47 mm / 6 57/64" x 3 11/32" x 1 27/32" 
- dimensions without front plate (W x D x H) 160 x 85 x 33 mm / 6 19/64" x 3 11/32" x 1 19/64"
- weight 470 g / 1.04 lbs.
- incl. mounting screws, counter nuts, and TX wrench

Cab SIM + DI Patchbay

Mon Pedalboard 4.2

Twin Rever Deluxe

Noam Chabbi

It’s been a lifelong journey to encapsulate our favourite Texan’s ‘Twang’ into a box! Alongside our countless hours of tweaking, we have received an outpouring of requests for this very creation! We listened to you, ourselves, (& Stevie on repeat for 20 years) &  can now proudly present the – Pedal Pawn ® Texan Twang ™.

This custom boost circuit is specifically tuned for an abundance of glassy clean-up, for when you roll back the guitars volume knob on each setting. Rolling up the guitars volume knob produces the Texan Twang ™ we have searched for our whole lives!

Pedal Pawn

Demo by  Alberto Barrero

Texan Twang

Flavio Salcuni

It's active Treble, Bass ,Gain and Volume controls allow for limitless tone shaping. Added Gain switch for even fatter tones!. The RC Booster V2 offers a super transparent 20db+ clean boost and a +- 15db 2 band active EQ without ever compromising the integrity of the original TONE. It provides a solution to sound degradation, caused by long instrument cables and/or long effect chains between guitar and amp, by strengthening the original signal. True bypass for eliminating any signal interference when switched off. Can be used with AC adaptor (optional) or 9V Battery.

Xotic

Review by Humbucker Music

Demo by Peter Honoré

RC Booster V2

ch ray

Say hello to the world’s most compact reorderable audio loop switcher.

A fully analog stereo loop switcher designed to break boundaries. 
Each stereo loop can be broken up into 2x mono loops with an Y-cable and in the looper used as 2x complete independent mono loops (Y-TRS-Cables). As these cannot be displayed in this tool (but often used to double the loops on big boards) we configured in this tool 3 stereo connections as 6x mono loops. 

ML10X is the answer for today's musicians.

Morningstar Engineering

Review by 

Demo by 

ML10X (5 Stereo Loop)

Die revolutionäre WL-Serie von BOSS überzeugt mit großartigem Sound, extrem niedriger Latenz und einer komfortablen Einrichtung – nie war es für Musiker einfacher, kabellos zu spielen. Das WL-60 System richtet sich an Performer, die es auf der Bühne ernst meinen, und kombiniert Plug-and-Play-Betrieb mit einer schnellen, anwendergeführten Steuerung. Der kompakte Empfänger wurde speziell für den Einsatz auf Pedalboards entwickelt und verfügt über ein großes Display sowie Schnellzugriffstaster, um das Frequenzspektrum zu scannen und den optimalen Funkkanal auszuwählen. Der robuste Taschensender ermöglicht im Betrieb mit herkömmlichen Alkali-Batterien eine Laufzeit von bis zu 25 Stunden und ist kompatibel mit nahezu jedem Instrument.

Offering great tone, ultra-low latency, and effortless set up, BOSS’s revolutionary WL series has made it easier than ever for musicians to go wireless. The WL-60 system is a great fit for serious stage performers, bridging plug-and-play simplicity with fast user-guided control. The compact receiver is tailor-made for pedalboards, and features a large visual display and direct-access buttons to quickly scan and select the best wireless channel. Rounding out the system is a rugged bodypack transmitter, which is compatible with nearly any instrument and runs for up to 25 hours on regular alkaline batteries.

Review by PREFORMER Magazine 

Demo by Preformer Magazine 

Demo by BOSS 

WL-60 Wireless System

Patrick Dougherty

Der Morningstar Engineering MC6 Pro ist ein hochentwickelter, voll programmierbarer MIDI-Fußcontroller, der für komplexe Pedalboard- und Studiointegrationen konzipiert wurde. Er verfügt über drei hochauflösende Farb-LCD-Bildschirme, die ein dynamisches visuelles Feedback bieten, einschließlich anpassbarer Farbstreifen und Schriftgrößen zur Identifizierung von Presets. Die umfangreiche Ausstattung umfasst vier Omniports, duale Relais-Schaltanschlüsse sowie USB-C-Device- und Host-Ports für den direkten Anschluss von MIDI-USB-Hardware. Der interne Prozessor ermöglicht ein anspruchsvolles Message-Stacking, wobei jedes der 3.072 verfügbaren Presets bis zu 32 gleichzeitige MIDI-Befehle senden kann. Der Controller ist in einem robusten Gehäuse aus sandgestrahltem Aluminium mit sechs Soft-Touch-Fußschaltern untergebracht.

The Morningstar Engineering MC6 Pro is a highly advanced, fully programmable MIDI foot controller designed for complex pedalboard and studio integration. It features three high-resolution color LCD screens that provide dynamic visual feedback, including customizable color strips and font sizes for preset identification. The unit's extensive I/O includes four Omniports, dual relay switching ports, and both USB-C Device and Host ports for direct connection to MIDI-USB hardware. Its internal processor allows for sophisticated message stacking, with each of its 3,072 available presets capable of sending up to 32 simultaneous MIDI messages. The controller is housed in a durable bead-blasted aluminum enclosure with six soft-touch footswitches.

Morningstar Product Page

Review by Gearspace

Review by Six String Sensei

Demo by SON WU

MC6 Pro

The Session DI really breaks down your signal into the component that matter the most, whether going to the PA or directly into a DAW. Gain, saturation and compression EQ. More importantly, the saturation has been calibrated for the frequencies that matter most for acoustic guitars. On the flip side, the compression EQ narrowly targets the frequency bands that are most problematic with plugged-in acoustics. The gain VU meter helps you dial in the right setting based on the particular characteristics of your onboard pickup. It's as if the designers identified all the problem-spots of using conventional DI boxes in live settings and whittled down tailor-made solutions.

LR Baggs

Review by Bluegrass Unlimited

Demo by Pedal of the Day

Demo by Mastered by Him

Session DI

Ben Wells

Zunächst einmal ist der Singular Sound AEROS Loop Studio zwar nicht der einzige Looper mit Display, jedoch der einzige mit einem farbigen 4,3 Zoll Touch-Display. Der Singular Sound AEROS Loop Studio beruht auf einer SoC-Lösung, auf der eine Linux-Variante läuft.

Transcend boundaries with the Aeros multi-track looper pedal. Create and perform with simultaneous parallel and sequential loops. That's up to 6 song parts (sequential loops) each with up to 6 tracks layered over each other (parallel loops). Plus, experiment with unlimited overdubs for limitless live looping action.

Singular Sound

Review by Bass Gear Magzine 

Review by Amazona 

Demo by loopop

Demo by Singular Sound 

Aeros Loop Studio

Featuring the largest tuning display Peterson Tuners has ever incorporated into one of their pedal tuners, the StroboStomp HD boasts a high-definition, LCD screen that incorporates a variable color LED backlight. The user-selectable colors can be used to personalize the tuner or to increase display viewing quality in different levels of ambient lighting depending on the usage environment. The vibrant screen colors can also be assigned to stock or user presets to significantly reduce menu navigation time and increase on-stage tuning confidence at the gig.

Peterson

Review by Gitarre & Bass

Demo by The Time Preservation Society

Demo by TalkingBass

Review by The Gear PAge

Review by TDPRI

StroboStomp HD

Danielo Olivera

Kontrolliere ein Volumen und FX-Parameter ohne dein Pedalboard mit einem weiteren großen Pedal noch voller zu packen. Platzsparen muss nicht heißen auf Funktionalität zu verzichten – das DVP Volume (X) Pedal macht alles das, was sein großer Bruder das DVP3 kann – bei halber Größe und genauso robust gebaut im leichten Alu-Gehäuse. Wie das DVP3 hat es auch die rutschfeste Pedaloberfläche und den patentierten Low-Friction-Band-Drive, der für einen sanften und gleichmäßigen Regelweg und zuverlässige Performance sorgt. Für maximalen Komfort ist die Leichtgängigkeit des Pedals vollkommen einstellbar.

Der AUX Ausgang vereint Tuner und Expression Funktion in einer Buchse, die per internem Schalter festgelegt werden kann. Über interne Trim-Potis kann das Minimum-Volumen des Pedals eingestellt werden und wenn du willst, kannst du auch die Funktionsrichtung umkehren – ein weiterer interner Schalter macht’s möglich.

Control your volume and FX parameters without crowding your pedalboard. Saving space doesn’t mean skimping on durability or functionality—the DVP4 Mini Volume (X) Pedal does everything that the larger DVP3 does at half the size, and it’s just as solidly built with a lightweight aluminum chassis, aggressive non-slip tread, and our patented Low Friction Band-Drive for a smooth range of motion and consistent, reliable performance. For maximum comfort and precision, the DVP4’s rocker tension is fully adjustable. 

The AUX output combines tuner and expression functionality into one jack that can be toggled with a switch inside the pedal. When using the DVP4 as an expression pedal, you can use an internal pot to set the minimum level of the parameter you’re controlling with the rocker. If you want to reverse the function of the heel-down and toe-down positions, the DVP4 has another internal switch that allows you to do so.

Dunlop

Dunlop Volume (X) Mini Pedal Review Premier Guitar EN

VOLUME (X) MINI (DVP4)

The GTO was created with Nashville session ace Guthrie Trapp to create an incredibly versatile session overdrive

Inspired by a vintage Nobels ODR-1. The GTO has a much tighter bottom, less gain and more cut in the mix. It can go from super mild to a really nice, dynamic OD feel. This pedal has compression but in a great way. You can use it as a clean boost and EQ or you can bring in the dirt.

J. Rockett Audio Designs

Review by Squid Guitar Inc

Demo by Guthrie Trapp

Demo by Rocky Folksy

Sebastian Schulz

THIS PEDAL WILL TRANSFORM YOUR GUITAR RIG

Don't let the Vertex Boost MKII's name fool you — it's much more than a mere boost. Make no mistake, this multifunction guitar pedal can function as a gain booster, with +16dB of ultra-transparent gain that can either drive your amp into saturation or give your solos a squeaky-clean level bump, depending on where you choose to deploy it. Able to accommodate both line- and instrument-level signals, the Boost MKII also includes ultra-linear input/output buffers that are guaranteed to elevate the sound of your entire rig. This stompbox's buffers can propel a typical mid-level rig into pro-level territory with zero tonal coloration. And if your rig is already 99% of the way there, the Boost MKII will deliver that elusive missing 1%. Beyond that, the Boost MKII's insert jack enables you to adjust your volume via an external treadle-style pedal while keeping your guitar's signal completely isolated — it's like plugging straight into your amp. Boasting a compact enclosure that's 33% slimmer than its predecessor, the Vertex Boost MKII belongs on every tone-obsessed guitarist's pedalboard.

Vertex Effects

Review by Guitar Player

Demo by Goodwood Audio

Demo by Vertex Effects 

Demo by Sweetwater

Boost MKII

Die magische Kombination aus Tremolo und Reverb ist das früheste Beispiel für eine perfekte Verbindung von Gitarreneffekten. Erstmals in legendären Verstärkern der 1960er Jahre eingesetzt, hat dieses harmonische Zusammenspiel unzählige Aufnahmen und Live-Performances geprägt – von frühem Surfrock, swampigem Bayou-Blues, Spaghetti-Western und Film-noir-Soundtracks bis hin zu modernem Indie-Rock. Auch heute entdecken Gitarrist:innen die inspirierende Kraft dieses Traumpaars immer wieder neu.

Flint ist ein Studio-Qualitäts-Effektpedal, das genau diese klassische Kombination liefert. Wir haben unsere Lieblings-Tremolo- und Reverb-Schaltungen aus der Vergangenheit intensiv analysiert, ihre klanglichen Feinheiten untersucht und sie in unseren aufwendig entwickelten Algorithmen detailgetreu nachgebildet. Flint ist im Grunde zwei Pedale in einem – Tremolo auf der einen, Reverb auf der anderen Seite.

The magical combination of tremolo and reverb is the earliest example of a perfect guitar effects marriage. First pioneered within historic amplifiers of the 1960s, this harmonious coexistence has made its way onto countless records and performances — from early surf, swampy bayou blues, spaghetti westerns and film noir soundtracks, to modern day indie rock. As music moves forward, guitarists continue rediscovering the inspiration provided by this perfect pair.

Flint is a studio-class effects pedal that delivers this classic combination. We carefully studied our favorite classic tremolo and reverb circuits, examined the sonic complexities and faithfully accounted for every detail in our hand-crafted algorithms. Flint is essentially two pedals in one, with tremolo on one half and reverb on the other.

Strymon

Review by Pedal of the Day

Demo by Made by Miike

Audio Examples

Flint

QuickMount Type J

Pedal-Montageplatte für mittelgroße Strymon-Pedale

Pedal Mounting Plate For Medium Size Strymon Pedals

El Capistan vereint drei verschiedene Bandmaschinentypen in einem Pedal, jeweils mit drei einzigartigen Modi und umfassender Kontrolle über Bandqualität, Maschinenzustand und Klangformung.

Wechseln Sie von der vollen Klangstabilität einer fabrikneuen Echomaschine bis zum stark schwankenden Klang eines renntauglichen Geräts. Genießen Sie den vollen Klang eines neuen Bandes oder die dunklen, rauen und vibrierenden Eigenschaften eines abgenutzten Bandes.

El Capistan provides three different tape machine types in one pedal, each with three unique modes and extensive control over tape quality, machine health and tone shaping.

Go from the full-range sonic stability of a fresh-from-the-factory echo machine, to the heavily fluctuating sound of a road-worn unit in need of service. Enjoy the full bodied sound of fresh tape, or dial in the dark, gnarled and vibey qualities of worn out tape.

Review by Elektronauts

Demo by strymon

El Capistan v2

Das neue Nobels ODR-1X ist die nächste Generation dieses mittlerweile legendären Overdrives und läutet ein neues Kapitel und eine Erweiterung in der Nobels Familie
ein. Auf vielfachen Wunsch wurde ein praktisches Bass-Cut-Poti hinzugefügt sowie die Möglichkeit, zwischen True-Bypass und Buffered-Bypass zu wechseln. Für Hi-Gain-Liebhaber gibt es jetzt auch einen neuen schaltbaren Hi-Gain-Boost.
Damit lässt sich der ODR-1X in ein wahres Hardrock-Monster verwandeln. Mit der Möglichkeit,
sowohl den Gain-Boost als auch On/Off fernzusteuern, zusammen mit der einzigartigen SPECTRUM-Klangregelung, ausklappbaren Mounty-P-Montageplatten und Knöpfen mit fluoreszierenden ‚Glow in the Dark‘-Zeigern, fügt das ODR-1X einem altbewährten Favoriten wertvolle Flexibilität und Nützlichkeit hinzu.

The new Nobels ODR-1X is the next generation of this now legendary overdrive, heralding a new chapter in the Nobels overdrive legacy. Due to popular demand, a convenient external bass cut pot has been added, as well as the option to change between true bypass or buffered bypass. For hi-gain aficionados, a new switchable hi-gain boost is also now available. This is capable of transforming ODR-1X into a true
hard rock monster.
With the ability to control both the gain boost and on/off remotely, along
with the unique SPECTRUM tone control, fold-out Mounty-P mounting plates and knobs with
fluorescent ‘Glow in the Dark’ pointers, the ODR-1X adds worthwhile flexibility and utility to a
time-tested favourite.

Nobels

Demo by Guitar Bonedo

Review by gearnews.de

ODR-1X

The 535Q Cry Baby Multi-Wah features a six-position Range Selector, a Variable Q control, and a switchable boost circuit so you can dial in the ultimate wah tone.

535Q  Cry Baby Multi-Wah Chrome

QuickMount Type M

Pedal-Montageplatte für Dunlop Cry Baby Wah-Pedale

Pedal Mounting Plates For Dunlop Cry Baby Wah Pedals

RockBoard

ISO Power Block V12 IEC

Für 10-20 FX-Pedale, 1 MOD-Slot - **622 x 424 mm / 24.49" x 16.69"** - erhältlich mit Gig Bag oder Flight Case

For 10 - 20 FX pedals, 1 MOD slot - **622 x 424 mm / 24.49" x 16.69"** - available with Gig Bag or Flight Case

Björn Pettersson

Pedalboard 18 pedals, MIDI controlled, either Tonex pedal amps or a real amp (typically Boogie Fillmore) preamp, chain ending in the Return Fx loop in two amps giving stereo. 

Chain: Sentry 4 cable method to (Clyde wah, Atlas, KingTone Fuzz, OCD (output buffer always on), Antique, Tonex One (for OD/Dist/Fuzz pedals), Gladio, Tonex Pedal for various amps without cab), from Sentry output to One Control MIDI dual loop, the loop(s) goes to one or two preamps input and from the Fx loop send back to the Return of the loop, from the OneControl outpput to the Volume pedal, Spark, Astra, Plethora, loop out of Plethora to Halo, back to Plethora slot for Delay/Reverb, Golden Reverbator, Ditto and finally connect the Return in the Fx loop of the two amps. 

Two 1Spot Truetone (CS12 and XP8) feeds the pedals. 

I haven't added the Morningstar yet, and uses a non midi OneControl for manual control of the loop so far. If/when getting the Morningstar I will control the Tonex pedal, Plethora, OneControl MIDI loop, Atlas and Halo to start with, also using the expression pedal feature to the Volume pedal. Then I hope UA will add MIDI over USB some day in the future, hopefully...  

Dreaming a bit, Morningstar would start producing an MC6 Pro combined with a loop controller of 3-4 loops.

I wish Rockboard would increase the height of the board just a few cm to adjust to modern bigger digital units, on the thinnest part not to increase the weight too much, e.g the 4.4. to be  722x350 mm.  Or even making another oversized series, this one as 750x350... :-) I use EBS cables to optimize space.

I also with Rockboard to add inlays to the bags and cases, to put in the bottom of the bag below the pedals, so that it would be possible to put down the bag on the ground while carrying it, without the bottom pedals (the Morningstar, Tonex One, Spark etc) to loosen if the stick out from the board .