Du willst dein Signal splitten und nicht auf passive Geräte, die deinen Tone killen und Signal verlieren zurückgreifen? Hier hast du was du brauchst! Diese kleine Zauberbox nimmt dein Inputsignal und splittet es permanent in zwei gebufferte Ausgangssignale, sodass dein Sound nicht an Klarheit verliert. Schließ deine Gitarre ans eine Ende und schicke es an einen Tuner, Mixer, separaten Amp etc. und den anderen Ausgang an dein Pedalboard, wie immer.

Need to split your signal? Don’t want to settle for a passive device that will kill your tone and cause signal loss? This is what you need! This little box of magic takes your input signal and splits it into two always-on outputs that are buffered so you don’t lose clarity or tone in any way. Plug your guitar in and use one output to send your clean signal somewhere like a tuner, mixer, separate amp, etc... and send the other output through your board like normal.

Official Product Page

Manual

Buffered Splitter

In 1962 the worlds first manufactured guitar pedal was introduced in the Maestro Fuzz-Tone. Three years later in 1965, it made its way across the pond from the USA to the hands of a British engineer named Gary Hurst in London. The legend has it that he was asked by a London session player to modify the circuit for more bass and better sustain. After some tweaking, the Tonebender was born. The Tonebender MKI was a three transistor circuit as was the following MKII that came later in 1966. Decades after the Tonebenders heyday of the 1960s, a collector named Dennis Johannsen realized that his 60's era Tonebeder had only two transistors, not three. This discovery caused a puzzling situation because all Tonebender circuits through MKIV are a three transistor design. Through further investigation, it came to light in an interview with Gary Hurst that he did make a very small batch of two transistor Tonebenders in February and March of 1966. Dennis Johannsen named his discovery the MK1.5, and it is one of the rarest pedals ever produced, a collectors dream. The Arbiter Fuzz face that came in late 1966 is an almost direct clone as well as various other two-transistor fuzz circuits of the era. The MK1.5 is a true legend of guitar that almost went unnoticed to history. The sound of this fuzz is very aggressive, full of low end, and sustain. You may also notice a slight velcro-ish type decay as notes decay off in extreme settings. As with most classic fuzz pedals, it loves a dirty amp or overdrive afterward in the signal path. Staying true to the original, I used high-grade carbon composition resistors, oversized capacitors, and two germanium transistors that I hand-matched to the circuit. 

Each small batch of Benders will use different transistors as it is challenging to find reliable sources of these devices in large quantities. The circuit uses vintage positive ground voltage, so do not daisy chain your power with other pedals. Inside the pedal is a battery snap or use any isolated power supply with a normal polarity power cable like your other pedals as I have wired it internally to work that way. The Bender is identical to the original except that I adjusted the taper of the pots to feel more intuitive. I also added a single power supply filter capacitor to help with noise and adjusted one resistor value for more volume. The switching is true-bypass. Each pedal in this batch is built-in identical form, but because of parts tolerances and the slight variance in the transistors, they will all be a bit different while still being the same. Be sure to always have this pedal first in your signal chain; the guitar must be plugged into its input due to the impedance it requires on its input, no exceptions. 

Product Page

Product Review 

Product Demo 

1966 Series Bender

The JHS Firefly Fuzz is a four-knob fuzzbox modeled after a vintage Germanium-based Tonebender MKIII. This pedal is designed to deliver a substantial and versatile fuzz tone, suitable for a wide range of musical styles.

Official Website

Review by Pedal of the Day

Review by musicradar

Review by reddit /guitarpedals

Demo by Curtis Kent

Demo by Lance Seymour

FireFly

Der JHS Kilt V2 verfügt nach wie vor über den fantastischen Schaltkreis der Vorgängerversion, allerdings mit super wenig Nebengeräuschen, verbesserter Slew Rate für sanfteren, strukturierteren Overdrive mit einem Charakter, der sich noch besser anfühlt als der des originalen Expandora Overdrives auf dem die Schaltung basiert. Der Cut/Flat Kippschalter gibt dir die Option das Low End zu Cutten, für einen beefigeren Sound als ihn der Expandora bietet. G1 und G2 Kippschalter lassen dir verschiedene Zerr-Sounds, von leichtem, transparenten Drive bis hin zur Wand aus Fuzz und Distortion und allem dazwischen. Außerdem verfügt die V2 über die Möglichkeit den G2 Toggle per Red Remote Fußschalter zu aktivieren, sodass du On-the-Fly auf heftigen Overdrive oder Fuzz umschalten kannst!

The JHS Kilt V2 still has the fantastic circuit of the version one, but with super low noise, improved slew rate for a smoother structure and a character that just feels better than the original Expandora. The Cut/Flat toggle switch gives the option to cut the low end frequencies or to have a more beefier sound than the original Expandora and the G1 and G2 toggles let you select various forms of distortion, from light transparent drive all the way to a wall of fuzz/distortion and everything found in-between. Also, the V2 has the ability to switch the G2 toggle with the Red Remote footswitch giving you the opportunity to flip into heavy overdrive or fuzz with a footswitch on the fly!

JHS The Kilt V2 - Demo Video by Mike Hermans

JHS The Kilt V2 - Demo by Livingroom Gear Demos

JHS The Kilt V2 - Demo Video by Chicago Music Exchange

JHS The Kilt V2 - Demo Video by Reverb.com

JHS The Kilt V2 - Demo Video by RJ Ronquillo

Kilt V2

Der NOTADÜMBLË ist ein DIY-Gitarrenpedal-Kit mit zwei Kanälen von JHS Pedals, mit dem Sie mithilfe eines einfachen Schalters zwischen Overdrive- und Clean-Boost-Modus wechseln können. Es verfügt über Regler für Input, Output, Drive, EQ und Volume sowie ein internes Trimpot zur Feinabstimmung der Präsenz. Das Kit ist für eine einfache Montage konzipiert und erfordert kein Löten.

The NOTADÜMBLË is a DIY dual-channel guitar pedal kit from JHS Pedals that lets you switch between overdrive and clean boost modes using a simple slider. It features controls for input, output, drive, EQ, and volume, plus an internal trimpot for fine-tuning presence. Designed for easy assembly, the kit requires no soldering. 

RockBoard Artists

Aktivitäten Übersicht

News

NotADumble

Beschreibung

Media

Videos

Handbücher

Reviews

Links

Technische Daten

Weitere Pedals von JHS

JHS

Buffered Splitter

JHS

1966 Series Bender

JHS

FireFly

JHS

Kilt V2

Produkte

Bau dein Board

Services

Community