Lee Atkin

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 1 V2 ist eine Pass-Through-Box, die speziell für Gitarristen und Bassisten entwickelt wurde. Du kannst das MOD 1 V2 nutzen um mehrere Pedale deines Setups im Front End und im Effekt-Loop des Verstärkers zu postieren (4-Kabel Methode) oder die vier TRS-Anschlüsse als zentralen Zugang und Ausgang des Boards nutzen. Die XLR-Through-Verbindung kann als Signalausgang vom Pedalboard zum Mischpult oder zur PA verwendet werden.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 5 x 6,3 mm TRS thru
- 1 x XLR thru (männlich vorne / weiblich hinten)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 5 x 6,3 mm / ¼" TRS thru
- 1 x XLR thru (male front / female back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR, IEC & Barrel Patchbay

Classic Rock Board

Tester

Dunlop

GCB-95 CryBaby Wah

QuickMount Type M

Pedal-Montageplatte für Dunlop Cry Baby Wah-Pedale

Pedal Mounting Plates For Dunlop Cry Baby Wah Pedals

Ziad Zakhia Douaihy

High-quality true bypass strip loop control for your effects pedals.

Compact easy switching solution to keep your tone intact. 
For your simple compact board, TheGigRig QuarterMaster QMX just makes life that little bit easier.

GigRig

Review by WIX 

Review by Musiker-Board

Demo by TheGigRig 

Official Product Video

Product Page

Quartermaster QMX-8

Der Keeley Fuzz Bender ist ein modernes 5-Regler-3-Transistor-Fuzz mit einer Kombination aus High-Gain-Silizium und seidigem, glattem Germanium Fuzz. Was macht Fuzz besser? Aktiver EQ. Mit zwei Gyratoren als aktivem EQ hast du die Möglichkeit massive Fuzz-Töne zu erzeugen, die mit typischen Squarewave Fuzzes nicht möglich sind. Bring deinen Verstärker mit bis zu 20 dB Boost / Cut bei 100 Hz und 10 kHz zum glühen. Der Fuzz Bender wurde um japanisches Vintage Germanium Transistoren herum aufgebaut, um seine monumentalen Fuzz-Töne zu erzeugen. Mit der neuen Bias-Steuerung regelst du das Attack und Decay deiner Noten. Der Bias Regler macht alles von fettem Squarwave Fuzz über Angular Fuzz bis zu glitchendem Velcro-Attack möglich. Die fünf Knöpfe des Fuzz Benders zeugen davon, dass für episches Fuzz schlicht die Größe ausschlaggebend ist.

The Keeley Fuzz Bender is a 5 knob - 3 transistor modern fuzz using a combination of high-gain silicon and silky smooth germanium. What makes fuzz better? Active EQ. Using two gyrators as an active EQ gives you the ability to create massive fuzz tones not possible with typical square-wave boxes. Pummel your amp with over 20dB of boost/cut at 100Hz and 10K Hz. The Fuzz Bender is built around vintage Japanese germanium to create its monumental fuzz tones. With the all new Bias Control, you control the attack and decay of your notes. Anything from Fat Square Waves to Angular Fuzz to glitchy-Velcro attacks are possible with the Bias Control. The Fuzz Bender’s five knobs confirm size matters when creating a new and epic world of fuzz.

Keeley Electronics

Official Product Page

Manual

Keeley Fuzz Bender - Official Demo Video

Keeley Fuzz Bender - Demo / Review Video - SeanPierceJohnson

MXR Octavio & Keeley Fuzz Bender - Review by Musikmaker [NL], [07-2020]

Keeley Fuzz Bender - Review by Gitarist [NL], [08-2020]

Keeley Fuzz Bender - Review by GuitarWorld [EN], [01-2020]

Keeley Fuzz Bender - Review by TopGuitar [PL], [12-2019]

Keeley Fuzz Bender - Review by Muzikus [CZ], [11-2019]

Keeley Fuzz Bender - Review by Gitarre&Bass [DE], [10-2019]

Keeley Fuzz Bender - Review by Gitarzysta [PL], [08-2019]

Fuzz Bender

PedalSafe Type D3

QuickMount Type D

Pedal-Montageplatte für große horizontale Pedale

Pedal Mounting Plate For Large Horizontal Pedals

Schutzabdeckung & RockBoard-Montageplatte für WAMPLER Paisley Deluxe, HotWired & Dual Fusion Pedale

Protective Cover & RockBoard Mounting Plate For WAMPLER Paisley Deluxe, HotWired & Dual Fusion pedals

Schutzabdeckung & universelle Montageplatte für WAMPLER Paisley Deluxe, HotWired & Dual Fusion Pedale

Protective Cover & Universal Mounting Plate For WAMPLER Paisley Deluxe, HotWired & Dual Fusion pedals

Der BE-OD Overdrive/Distortion wird in USA zusammengeschraubt und soll den sahnigen Sound des BE-100 auf Knopfdruck generieren.

The BE-OD overdrive pedal captures the tone of the now legendary Friedman BE-100 amplifier which has graced the stages of world-class musicians the world over. The BE-OD delivers authentic tube-amplifier sound from a compact pedal with the controls needed to shape your tone including volume, gain, tight, bass, treble and presence. These responsive knobs will take you from light, slightly broken up overdrives to straight up gain nirvana. Built in the USA and designed to withstand decades of abuse the BE-OD is a must have pedal for any tone enthusiast.

Friedman

Review by Bonedo 

Demo by SweetWater 

Demo by Pete Thorn 

BE-OD

The Phase 99 combines two Phase 90 circuits in a single housing with Modern/Vintage, Series/Parallel, and Sync switches for ultimate phaser experimentation.

 

This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).

Product Page 

Product Manual 

Product Demo 

Phase 99

Launched in 1976, the CE-1 Chorus Ensemble was not only the world’s first chorus effect pedal, but also the very first BOSS pedal. Three years later, this inventive new sound was squeezed into the blue CE-2 Chorus, and chorus pedals have remained in the compact lineup ever since. Four decades on, the spacious modulated tone of the signature BOSS effect is still loved by musicians everywhere. In 2016, to celebrate the 40th anniversary of BOSS innovation, the original analog chorus sounds are now reborn with the Waza Craft CE-2W. The CE-2W’s Standard mode faithfully recreates the classic CE-2 chorus sound, and adds an expansive new sound field with stereo output, which was unavailable in the mono CE-2. CE-1 mode fully reproduces the stereo chorus and vibrato sounds of the legendary CE-1, with the addition of variable chorus depth not available in the original pedal. To commemorate the birth of BOSS effects, the CE-2W is made exclusively in Japan, just as the original CE-1 and CE-2 were.

BOSS

Review by The Gear Page

Review by Sound on Sound

Review by reddit /guitarpedals

Review by Gigs and Guitars

Demo by Musicmaker

Demo by gearmanndude

CE-2W Chorus (Waza Craft)

PedalSafe Type E1

QuickMount Type E

Pedal-Montageplatte für Standard-Boss-Pedale

Pedal Mounting Plate For Standard Boss Pedals

Schutzabdeckung & RockBoard-Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & RockBoard Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Schutzabdeckung & universelle Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & Universal Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Der TS9 Tube Screamer Reissue belebt das legendäre Overdrive‑Pedal der 1980er neu, das zahllose Gitarrentöne prägte.
Sein charakteristischer Mitten‑Boost und das warme Clipping verleihen sanften Biss, ohne die Klarheit jeder Note zu opfern.
Drei einfache Regler—Drive, Tone und Level—formen den Sound von dezentem Boost bis zu sattem Overdrive.
Buffered Bypass sichert Ihr Signal auf dem Pedalboard, ob aktiv oder ausgeschaltet.
Kompakt und robust in seinem typisch grünen Gehäuse ist es sowohl bei Profis als auch Hobbyisten unverzichtbar.
Ob SRV‑Sparkle oder moderner Crunch—der TS9 liefert den unverwechselbaren Klassiker‑Sound.

The TS9 Tube Screamer reissue faithfully revives the classic 1980s overdrive that defined countless guitar tones.
Its signature mid‑hump and warm clipping add smooth grit while preserving note clarity and amp feel.
Three simple knobs—Drive, Tone, and Level—let you shape everything from a gentle boost to full‑bodied overdrive.
Buffered bypass ensures your signal stays strong on‑ or off‑board, with true pedalboard reliability.
Compact and rugged, its familiar green enclosure has been a staple on pros’ and hobbyists’ rigs alike.
Whether you’re chasing SRV sparkle or modern crunch, the TS9 delivers instantly recognizable tone.

Ibanez

Review by Reddit /guitarpedals

Demo by intheblues

TS9 Tube Screamer

QuickMount Type B1

Pedal-Montageplatte für FRIEDMAN, KEELEY Halo, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD, Jupiter V2 Pedale, Mooer GL 100

Pedal Mounting Plate for FRIEDMAN, KEELEY Halo, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD, Jupiter V2 pedals, Mooer GL 100

The Cali76 Compact Deluxe is an all-analogue recreation of the legendary Urei® 1176® studio compressor, with an unmistakable sound heard on countless classic albums. This studio-grade FET compressor uses Class-A, low-noise circuitry and a dedicated parallel compression control to bring your favourite recorded guitar tones to your pedalboard.

Origin Effects

Review by that guitar lover

Demo by Living Room GD

Demo by Sweetwater

Cali76 Compact Deluxe

JakobSlash

Das GE-7 Equalizer-Pedal bietet sieben EQ-Bänder im Bereich von 100Hz bis 6,4kHz, ideal für Gitarrensounds, mit einer Anhebung/Absenkung von +/- 15dB pro Band. Damit kannst du deinen Sound vollständig kontrollieren und unerwünschte Rückkopplungen eliminieren, insbesondere wenn du ihn nach einem Verzerrungseffekt anschließt.

The GE-7 Equalizer pedal offers seven bands of EQ ranging from 100Hz to 6.4kHz, ideal for guitar sounds, with boost/cut of +/- 15dB per band. This lets you completely control your sound and eliminate unwanted feedback, particularly when connected after a distortion effect.

Official Website

Review by The Gear Check

Review by Audiofanzine

Review by Guitar Gear

Demo by Law of the Riff

Demo by New Music Academy

Demo by Guitar Bonedo

GE-7 Equalizer

David Litaba

Das mittlerweile legendäre Wampler Pantheon ist eine einzigartige Interpretation der klassischen „Blues Breaker“-Stompbox, die alle klanglichen Nuancen des Originals einfängt, aber mit zusätzlicher Flexibilität und Stil. Auf diese Weise fand es seinen Weg auf Tausende von Pedalboards in aller Welt. Das neue Pantheon Deluxe ist ein Dual-Overdrive-Pedal, das diese Entwicklung um einige Schritte weiterführt, indem es ein flexibles Design mit zwei völlig unabhängigen Pantheon-Schaltkreisen bietet, von denen einer als klassischer Blues Breaker und einer mit einem moderneren Boutique-Sound ausgelegt ist. 

The now legendary Wampler Pantheon provided a unique interpretation of the classic “Blues Breaker” style stomp box, by capturing all the tonal nuance of the original, but with added flexibility and style. In doing so, it found its way onto thousands of pedalboards across the world. Enter the new Pantheon Deluxe – a dual overdrive pedal that takes this evolution several steps further by offering a flexible design with two completely independent Pantheon circuits, one voiced as a classic blues breaker and one with a more modern boutique sound. 

Wampler

Demo by EytschPi42

Demo by Tom Quayle

Demo by Jack Fossett

Demo by  Kris Barocsi

Review by gitarrebass.de

Review by bonedo.de

Review by guitarpedalx.com

Review by tdpri.com

PANTHEON DELUXE DUAL OVERDRIVE

The MXR Carbon Copy Analog Delay features a completely analog audio path for the ultimate in rich, warm delay-made possible only by old-school bucket brigade technology. This design boasts an amazing 600ms of delay time with optional modulation via a top-mounted switch and a simple, three-knob layout that controls Delay time, Mix (dry/wet blend), and Regen (delay repeats)-all in a pedal no bigger than a Phase 90. In addition, two internal trim pots offer user-adjustable width and rate control of the modulation for even more tonal options. The Carbon Copy will take you from crisp “bathroom” slap echoes to epic, Gilmour-esque delays with a twist of a knob. True hardwire bypass, single 9-volt operation, and stage-ready blue LEDs round out the package.

Demo by PMTVUK

Demo by Marty Music

M169 Carbon Copy Analog Delay

QuickMount Type A

Pedal-Montageplatte für Standard-Einzelpedale

Pedal Mounting Plate For Standard Single Pedals

RockBoard

ISO Power Block V12 IEC

Für 9-14 FX-Pedale, 2 MOD-Slots - **722 x 236 mm / 28.43" x 9.29"** - erhältlich mit Gig Bag oder Flight Case

For 9 - 14 FX pedals, 2 MOD slots - **722 x 236 mm / 28.43" x 9.29"** - available with Gig Bag or Flight Case

Paulo Marques

'63 Precision Bass

Dishan Abrahams - live pedalboard

The Diabolik fuzz pedal is based on the B:Assmaster circuit and while working with Justin on refining it’s signature sound, we tuned it specifically to allow more low end to pass through both the Clean and Fuzz channels. The result is a pedal that ranges from a subtle harmonic fuzz to extreme, mangled low end squash that’s perfect for bass and guitar alike.

Malekko

Review by Premier Guitar

Review by Talk Bass.com

Demo by Tanner Cundy

Diabolik

Cadran Tulipe

MU-TRON III+® translates the envelope or “volume profile” of every musical passage, …automatically… into an easily-controlled, vowel-like sound, as you play.
Use MU-TRON III+® to create a variety of synthesizer sounds with most electrified instruments: guitar, bass, keyboards, drums, flute, saxophone, brasses, …. even microphone.

The sharper your attack and the more percussive your instrument, the wilder your sound will be.
Besides providing that inverted “snap” (perfect for funky bass), MU-TRON III+®also functions as an automatic “wah” pedal. Full instructions are included, but you decide how far you want to go.

Mu-Tron

Demo by BassTheWorld.com

Demo by James Hood Guitar

Mu-Tron III+

Philippe Kirsch

Our Future Impact v3  has a world class pitch tracking system that performs lightning fast even in the lowest octaves. Hard to imagine, hard to explain, easy to believe by listening. 

With its virtual analog sound engine, our Future Impact v3 makes your instrument sound as big as you could not imagine earlier. From Mini-style aggressive synth basses to acid bleeps, flutes and organs, synth leads, you will have reach for all the characteristic sounds of the electronic music history. You have four oscillators with extensive waveshaping plus two filters two perform a deep sound editing with the PC/Mac editor software supplied.

Built from aluminium, Future Impact v3 will be your lightest accessory on tour. And will last forever. 

pandaMidi

Review by Gearnews

Review by Amazona

Demo by

Future Impact v3

Always thinking of our fat-stringed brethren, we had to make a 3-channel, programmable, rig-in-a-box for bassists who can’t get enough of a great thing. Like the TRI-A.C. for guitar, you get three hot tones right at your toetips. The all-analog circuitry features the same controls as its single channel predecessor: Drive, Bass, Treble, Presence, Blend and Level. Digital only in its programmability, you just tweak the knobs until you find a tone, double-tap on a footswitch, and it’s saved in that channel. It’s that simple. Three of your faves — to go!

Tech 21

Review by bonedo

Demo by  Vincenzogrieco

Demo by  Subbeast Bass Pedals&Effects

SansAmp Programmable Bass Driver DI

OC-3 Super Octave

Mit dem OC-2 Octave-Pedal kannst du deinen Sound durch Hinzufügen von zwei zusätzlichen Tönen aufpeppen - eine und zwei Oktaven unterhalb der ursprünglichen Note. Jeder Ton hat einen separaten Lautstärkeregler und wird mit hervorragender Klarheit wiedergegeben.

The OC-2 Octave pedal lets users fatten up their sound by adding two additional tones--one and two octaves below the original note. Each tone has a separate volume control and plays back with outstanding clarity.

Review by TalkBass

Demo by Middle Aged Gear Junkie

Demo by Nick Granville

OC-2 Octaver

Cali76 TX/TX-L

Based on our coveted Tone Hammer amplifier, the Tone Hammer preamp/DI is our swiss-army knife for your pedalboard. Featuring fully sweepable midrange frequencies in addition to bass and treble controls the Tone Hammer gives you studio-inspired EQ paired with a pristine D.I. for the studio and stage. To give this tone shaping unit the ultimate flexibility we introduce our proprietary Adaptive Gain Shaping circuitry (AGS). AGS allows the player to kick in an additional gain structure allowing you to go from modern tones to vintage, tube-like saturation with the stomp of a button. It’s 18 volt operation gives the Tone Hammer plenty of headroom to reproduce the most dynamic playing styles and it robust design makes this pedal truly road-worthy.

Aguilar

Review by Awkward sound

Demo by  IvanBassist 

Aguilar Tone Hammer

Jonathan James

Demo by 

BOSS TU-3 Chromatic Tuner

Gen x 14 Power Supply

Für 15-25 FX-Pedale, 2 MOD-Slots - **820 x 424 mm / 32.28" x 16.69"** - erhältlich mit Gig Bag oder Flight Case

For 15 - 25 FX pedals, 2 MOD slots - **820 x 424 mm / 32.28" x 16.69"** - available with Gig Bag or Flight Case

Der Latchmo x 2 ist ein kompaktes, passives Schalt-Utility, mit dem Sie jeden standardmäßigen rastenden Fußschalter in einen momentanen Fußschalter verwandeln können. Mit zwei unabhängigen Kanälen in einem kleinen Gehäuse wurde es entwickelt, um Ihnen maximale Flexibilität auf Ihrem Pedalboard zu bieten. Dieses clevere kleine Gerät ist perfekt, um die Tap-Tempo- oder Ramp-Funktionen Ihrer Strymon-, Eventide- oder ähnlicher Pedale zu steuern. Es stellt sicher, dass Ihre Effektpedale die korrekte Schaltfunktion haben, um auf all ihre großartigen Funktionen zugreifen zu können.

The Latchmo x 2 is a compact, passive switching utility that allows you to turn any standard latching footswitch into a momentary footswitch. With two independent channels in one small enclosure, it is designed to give you maximum flexibility on your pedalboard. This clever little device is perfect for controlling the tap tempo or ramp features on your Strymon, Eventide, or similar pedals. It ensures your effects pedals have the correct switching to access all their great features.

LATCHMO x 2

Der MIDI Cinco fasst fünf Mono‑/TRS‑Ein‑ und Ausgänge plus einen 5‑poligen DIN‑MIDI‑Thru in einem kompakten, robusten Gehäuse zusammen.
Vollständig passive, isolierte Buchsen eliminieren Erdschleifen‑Brummen und ermöglichen sauberes Patchen von Gitarre, Amp‑Loop oder Remote‑Switches irgendwo auf dem Board.
Speziell für die Erweiterung von G3/G3S‑Switchern oder den Einsatz mit jedem MIDI‑Setup entwickelt, leitet er Signale puffigungsfrei weiter.
Das leichte Aluminiumgehäuse (125 × 77 × 40 mm) passt auf jedes Pedalboard und verträgt problemlos harte Bühneneinsätze.
Ohne Stromanschluss – einfach TRS‑ und MIDI‑Kabel einstecken und in Sekundenschnelle auf‑ und abbauen.
Ob Audio‑Patchbay oder MIDI‑Verteiler – der Cinco hält dein Setup kompakt und zuverlässig.

The MIDI Cinco consolidates five mono/TRS audio ins and outs with an extra 5‑pin DIN MIDI thru in one rugged, pedalboard‑ready chassis.
Its fully passive, isolated jacks eliminate ground‑loop hum, letting you patch guitars, amps, effects loops or remote switches cleanly anywhere on your board.
Designed to extend G3/G3S switching or sit alongside any MIDI‑equipped rig, it simply passes signals straight through with zero buffering.
Built from lightweight aluminium in a 125 × 77 × 40 mm footprint, it tucks into cramped boards while standing up to road duty.
No power required—just plug in your TRS and MIDI cables and go from quick setup to teardown in seconds.
Whether you need extra audio patching or a convenient MIDI hub, the Cinco streamlines your workflow without fuss.

Midi Cinco

14 isolierte Hochstromausgänge
8x9V@200mA
4x9x@500mA
2x9 oder 12V@1000mA
TheGigRig auf Länge zugeschnittene Gleichstromkabel

Funktioniert als eigenständige Stromversorgung oder als Teil des modularen Stromversorgungssystems von TheGigRig

14 high current isolated outputs
8x9V@200mA
4x9x@500mA
2x9 or 12V@1000mA
TheGigRig cut to length dc cables

Works as a stand alone supply or as part of TheGigRig Modular Power Supply System

Review by the Fretboard

Review by musicradar

Das ursprüngliche Remote Loopy2 ermöglichte es, dein Setup mit zwei zusätzlichen programmierbaren Loops zu erweitern – doch zwei Fragen wurden uns immer wieder gestellt: Kann man es in Stereo nutzen? Und kann man es per MIDI schalten?

Ja, das können wir!

Hier ist das GigRig Remotest Loopy2.

Wir haben den Klassiker überarbeitet und einen parallelen Signalweg hinzugefügt, sodass du jetzt MONO- oder STEREO-Effekte verwenden kannst. Außerdem haben wir MIDI integriert, sodass du die Loops entweder mit einem TRS-Fußschalter oder per PC-/CC-MIDI-Nachrichten aktivieren kannst.

Die beiden True-Bypass-Passivloops sind mit allen Effekten kompatibel – von modernen digitalen bis hin zu klassischen analogen Pedalen und allem dazwischen. Sie können sowohl vor dem Verstärker als auch im Effektweg deines Amps eingesetzt werden.

Zusätzlich haben wir am Ausgang einen schaltbaren, hochwertigen True-Stereo-Puffer integriert, um die Impedanzen konstant zu halten.

Wenn du einfach ein paar zusätzliche programmierbare Loops für dein Board brauchst – mono oder stereo – bist du mit dem Remotest Loopy2 bestens bedient.


The original Remote Loopy2 enabled you to expand your rig by adding two extra programable loops, but there were two questions we were always asked. Can you make it stereo?

Can you switch it with MIDI?

Yes we can!

Introducing TheGigRig Remotest Loopy2

We’ve updated the classic by adding a parallel signal path so now you can use MONO or STEREO effects. We've also added MIDI so you can activate the loops using a TRS remote switch or via PC/CC MIDI messages.

The 2 True Bypass passive effects loops can be used with any effects from modern digital to vintage analog and everything in between. It can be placed in front of the amp or in your amp’s fx loop.

We’ve also added a switchable true stereo, high quality, buffer on the output to keep your impedances consistent.

If you just need a couple of extra programable loops for your board, mono or stereo, the Remotest Loopy2 will get you sorted.


Remotest Loopy2

Quartermaster QMX-8 von GigRig