GSC-4

MWW-1/WW-1 is a classic wah-wah effect enabling the setting of the tones and with new comfortable switching mode. Four switches of the tone parameters will let you match the tone to your needs. MWW-1/WW-1 sounds excellent with clean, crunch and with high overdrive tones as well. MWW-1/WW-1 will sound clean and deep on the clean tones because it doesn’t get distorted even by the signal from the humbucker. On the gain tones MWW-1/WW-1 won’t cause “choking” the tone because of the possibility to reduce the “quality factor of the resonance circuit” and the deepness of the wah-wah functionality. 
Basses’ switch will be helpful to let the guitar sound with a wah-wah with full band (without bass attenuation). VOLUME switch enables to adjust the level of output signal when the wah-wah is active. 

MWW-1/WW-1 posses two switching modes: traditional (with the switch located in front of the pedal) and (automatic mode with the sensor of placing the leg on the pedal). Due to that, the switching OFF and ON of the wah-wah is far more faster and more comfortable what gives new creative capabilities. Photo element instead of potentiometer makes the using of wah-wah more easy and enlarges the effect reliability.

Review by Musiker-Board

Product Page

Manual

MWW-1

WW-1 is a classic wah-wah effect with possibility to set the tones and with a new comfortable switching of the effect mode. Four switches of the tone parameters will let you match the tone to your needs. WW-1 will sound clean and deep on the clean tones because it doesn’t get distorted even by the signal from the humbucker On the tones getting distorted WW-1 won’t cause “choking” of the tone because of the possibility to reduce the “quality factor of the resonance circuit” (Q FACTOR) and the deepness of the wah-wah effect (DEEP). Bass switch (BASS) will be helpful to let the guitar sound with a wah-wah effect with a full band (without low tones cutting). Volume switch (VOLUME) enables to adjust the level of output signal when the wah-wah is active. WW-1 posses two switching modes: traditional (with the switch located in front under the pedal) and automatic mode (with the sensor detecting the leg on the pedal). Due to this solution, the switching OFF and ON of the wah-wah effect is far more faster and more comfortable what gives a new creative capabilities. Photo element instead of the potentiometer makes the using of wah-wah more easy and enlarges the effect reliability.

Review by Ultimate Guitar

Review by audiofanzine

BWW-1

Wowee Wah WW-1

G lab ww-1 manual

Rob Chapman - Wowee Wah Demo

WW-1 Wowee-Wah

Smooth Delay SD-1 is a classic delay with applied MAX ANALOG technology. Analog voice circuit (adjustable attenuation of the high and low frequencies) and SMOOTH function enable SD-1 emulate the effect of classic analog and tape echoes. Backlighted foot knobs and TAP TEMPO function enable easy control on the stage. SD-1 can be also controlled via MIDI.

SD-1 is a professional delay type effect with a clickless True Bypass and with possibility to match the effect to the signal level. Input gain signal level regulation avoids distortions and hums, especially at the amp effect loop, where are different signal levels. When the overdriven amp channel is in use connecting SD-1 to amp effect loop brings the best tone. SD-1 can be connected to the serial or parallel effect loop (using KILL DRY function).

SD-1

SD-1 by G-LAB

Produkte

Bau dein Board

Community

Featured Artists

Services

SD-1

Media

Handbücher

Reviews

Links

Technische Daten

Weitere Pedals von G LAB

G LAB

GSC-4

G LAB

MWW-1

G LAB

BWW-1

G LAB

WW-1 Wowee-Wah

Produkte

Bau dein Board

Services

Community