MWW-1/WW-1 is a classic wah-wah effect enabling the setting of the tones and with new comfortable switching mode. Four switches of the tone parameters will let you match the tone to your needs. MWW-1/WW-1 sounds excellent with clean, crunch and with high overdrive tones as well. MWW-1/WW-1 will sound clean and deep on the clean tones because it doesn’t get distorted even by the signal from the humbucker. On the gain tones MWW-1/WW-1 won’t cause “choking” the tone because of the possibility to reduce the “quality factor of the resonance circuit” and the deepness of the wah-wah functionality. 
Basses’ switch will be helpful to let the guitar sound with a wah-wah with full band (without bass attenuation). VOLUME switch enables to adjust the level of output signal when the wah-wah is active. 

MWW-1/WW-1 posses two switching modes: traditional (with the switch located in front of the pedal) and (automatic mode with the sensor of placing the leg on the pedal). Due to that, the switching OFF and ON of the wah-wah is far more faster and more comfortable what gives new creative capabilities. Photo element instead of potentiometer makes the using of wah-wah more easy and enlarges the effect reliability.

Review by Musiker-Board

Product Page

Manual

Demo by Kuba Pilszek

MWW-1

Smooth Delay SD-1 is a classic delay with applied MAX ANALOG technology. Analog voice circuit (adjustable attenuation of the high and low frequencies) and SMOOTH function enable SD-1 emulate the effect of classic analog and tape echoes. Backlighted foot knobs and TAP TEMPO function enable easy control on the stage. SD-1 can be also controlled via MIDI.

SD-1 is a professional delay type effect with a clickless True Bypass and with possibility to match the effect to the signal level. Input gain signal level regulation avoids distortions and hums, especially at the amp effect loop, where are different signal levels. When the overdriven amp channel is in use connecting SD-1 to amp effect loop brings the best tone. SD-1 can be connected to the serial or parallel effect loop (using KILL DRY function).

Review by audiofanzine

Demo by Fabio Macor

Demo by  Simon Gotthelf Gear Demos

SD-1

The G-Lab BC-1 Boosting Compressor is a classic full analog compressor with an opto component, ensuring high sound quality. It works well as a booster or booster-compressor on crunch and overdriven tones, making your guitar sound better and playing easier. The BC-1 has a ultra-low noise level, eliminating typical “pump” or “breath” effects.

The pedal features a simple design with two sets of dials for compressor adjustment and volume (boost) adjustment for each channel. The foot switch allows for easy switching between channels, making it ideal for subtle compression on one channel and strong compression on the other.

Demo by digimartnet

Demo by griffbrett0205

Review by OVNI LABS

Review by Compressor Pedal Reviews

Official Website

BC-1 Boosting Compressor

The G-Lab GLA-TCH-1 is a classic chorus effect pedal featuring G-Lab’s Max Analog technology, which achieves a clear and deep chorus effect on electric guitar and bass. This dual-effect design houses a 24-bit DSP processor with a discrete analog signal path and control, resulting in a very low-noise, low-distortion sound.

RockBoard Artists

Aktivitäten Übersicht

News

Mac 4.4 Midi

Media

Videos

Reviews

Links

Technische Daten

Weitere Pedals von G-LAB

G-LAB

MWW-1

G-LAB

SD-1

G-LAB

BC-1 Boosting Compressor

G-LAB

TCH-1

Produkte

Bau dein Board

Services

Community