GSC-3 is a foot controlled loop switcher, the controller which replaces the amp footswitch and the MIDI foot controller.

Product Page

Review by bonedo

Manual

GSC-3

MWW-1/WW-1 is a classic wah-wah effect enabling the setting of the tones and with new comfortable switching mode. Four switches of the tone parameters will let you match the tone to your needs. MWW-1/WW-1 sounds excellent with clean, crunch and with high overdrive tones as well. MWW-1/WW-1 will sound clean and deep on the clean tones because it doesn’t get distorted even by the signal from the humbucker. On the gain tones MWW-1/WW-1 won’t cause “choking” the tone because of the possibility to reduce the “quality factor of the resonance circuit” and the deepness of the wah-wah functionality. 
Basses’ switch will be helpful to let the guitar sound with a wah-wah with full band (without bass attenuation). VOLUME switch enables to adjust the level of output signal when the wah-wah is active. 

MWW-1/WW-1 posses two switching modes: traditional (with the switch located in front of the pedal) and (automatic mode with the sensor of placing the leg on the pedal). Due to that, the switching OFF and ON of the wah-wah is far more faster and more comfortable what gives new creative capabilities. Photo element instead of potentiometer makes the using of wah-wah more easy and enlarges the effect reliability.

Review by Musiker-Board

MWW-1

The WH-1 is based on the existing WW-1 model. Haynes has added his own vintage-avoured EQ tweaks. It’s a very solid-feeling pedal too: the rocker itself has a brushed metal nish and it looks positively industrial. The purple base has an input jack on one side, and an output jack and 9vDC jack on the other (alongside Warren’s signature) as well as a ‘Q FACTOR’ switch for selecting between high and low Q modes. On the side of the pedal itself is a switch for selecting the On/ Off mode: in the ‘up’ position you need to press the pedal all the way down to engage the effects, but in the ‘down’ position you only need to put your foot on the pedal to turn the wah wah effect on.

Review by mixdownmag

Official Website

WH-1

Smooth Delay SD-1 is a classic delay with applied MAX ANALOG technology. Analog voice circuit (adjustable attenuation of the high and low frequencies) and SMOOTH function enable SD-1 emulate the effect of classic analog and tape echoes. Backlighted foot knobs and TAP TEMPO function enable easy control on the stage. SD-1 can be also controlled via MIDI.

SD-1 is a professional delay type effect with a clickless True Bypass and with possibility to match the effect to the signal level. Input gain signal level regulation avoids distortions and hums, especially at the amp effect loop, where are different signal levels. When the overdriven amp channel is in use connecting SD-1 to amp effect loop brings the best tone. SD-1 can be connected to the serial or parallel effect loop (using KILL DRY function).

Produkte

Bau dein Board

Community

Featured Artists

Services

GSC-4

Technische Daten

Weitere Pedals von G LAB

G LAB

GSC-3

G LAB

MWW-1

G LAB

WH-1

G LAB

SD-1

Produkte

Bau dein Board

Services

Community