andronik supersonik

Die RockBoard® MOD 5 Cab SIM + DI Patchbay bietet wählbare, IR-basierte Stereo-Lautsprecher Simulation, eine aktive DI-Box, sowie eine einfache Lösung, um alle Verbindungen zu und von deinem Effekt Setup zu organisieren. Egal, ob du ein RockBoard® oder ein anderes Pedalboard einer anderen Marke verwendest - die MOD 5 eröffnet völlig neue Möglichkeiten. Mit der Speaker-Cab-Simulation und DI kannst du direkt loslegen und hast DEINEN Sound parat, unabhängig davon, welche Backline an der jeweiligen Venue zur Verfügung steht. Du möchtest deine persönliche Lieblings-Cabinet benutzen? Kein Problem, lade eine Impulse Response des Sounds in die MOD 5 und du hast sie überall dabei. Der Patchbay-Teil dient dazu, Verbindungen von unterhalb deines Pedalboards nach vorne zu leiten, um dir einen zentralen Zugangspunkt zu deinem Setup zu geben und deinen Kabelsalat aufzuräumen. Für geräuschloses Üben auf der Straße bietet der MOD 5 auch einen Kopfhörerverstärker mit einstellbarer Ausgangslautstärke.
- Cabinet Simulation & DI Patchbay
- IR basierte Lautsprecher Simulation
- 6 integrierte IRs wählbar
- Unterstützung von zusätzlichen Custom IRs (max. 1024 pts.)
- integrierte aktive DI Box
- Kopfhöhrer Verstärker
- passend für MOD Slots in RockBoard® Pedalboards
- kompatibel mit einer weiten Reihe anderer Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- wählbarer MONO / STEREO Input
- wählbarer UN- / BALANCED Output
- Ground Lift Schalter
- Regler für Phones Volume
- 3 x 6,3 mm TRS Thru
- XLR DI Out
- 6.3 mm Parallel TRS Output
- 3.5 mm Stereo Kopfhöhrer Ausgang mit einstellbarer Lautstärke
- micro USB Anschluss für Firmware Updates und zum Hochladen von Custom IRs
- Stromversorgung via optionalem 9V DC Netzteil, 2.1 x 5.5 mm Hohlstecker, Polarität (-) innen
- Stromaufnahme 300 mA
- Batteriebetrieb nicht unterstützt
- Abmessungen mit Frontplatte (B x T x H) 175 x 85 x 47 mm 
- Abmessungen ohne Frontplatte (B x T x H) 160 x 85 x 33 mm
- Gewicht 470 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The RockBoard® MOD 5 Cab SIM + DI Patchbay offers customizable, IR-based stereo speaker cabinet simulation, an active DI box, as well as a simple solution to organize all the connections to and from your effects setup. Whether you are using a RockBoard® or any other brand pedalboard - the MOD 5 will open completely new possibilities. The speaker cab simulation & DI let's you go direct, providing YOUR sound, whatever backline is being provided at the venue you're playing. Do you want to use your favorite cab? No problem, load an impulse response of its sound into the MOD 5 and you have it with you, wherever you go. The patchbay part is designed to route connections from underneath your pedalboard to its front, in order to give you a central access point to your setup and tidy up your connections. For silent and on the road practicing, the MOD 5 also provides a headphone amplifier with adjustable output volume.
- cabinet simulation & DI patchbay
- IR-based speaker cabinet simulation
- 6 integrated IRs selectable
- support of additional Custom IRs (max. 1024 pts.)
- integrated active DI box
- headphone amplifier
- fits MOD slots in RockBoard® pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- selectable MONO / STEREO input
- selectable UN / BALANCED output
- ground lift switch
- control for Phones Volume
- 3 x 6.3 mm / ¼" TRS thru
- XLR DI Out
- 6.3 mm / ¼" Parallel TRS output
- 3.5 mm / 1/8" stereo headphone output with adjustable volume
- micro USB connection for firmware updates and loading custom IRs
- power supply via optional 9V DC power adapter, 2.1 x 5.5 mm barrel plug, polarity (-) center
- current draw 300 mA
- battery operation not supported
- dimensions with front plate (W x D x H) 175 x 85 x 47 mm / 6 57/64" x 3 11/32" x 1 27/32" 
- dimensions without front plate (W x D x H) 160 x 85 x 33 mm / 6 19/64" x 3 11/32" x 1 19/64"
- weight 470 g / 1.04 lbs.
- incl. mounting screws, counter nuts, and TX wrench

Cab SIM + DI Patchbay

Vu Board fat

Tester

The Empress Tremolo2 is an original design built from the ground up to include innovative features without sacrificing tone. The audio signal path is analog, but the tremolo effect is controlled digitally via opto technology.

Tap tempo, selectable waveforms, a choice of 8 rhythms and a full preset system capable of storing up to 8 presets are all at your fingertips. The control port allows control over the Tremolo2 via external tap tempo, expression pedal, control voltage and MIDI, making the tremolo2 more powerful than ever!

Empress Effects

Demo by Knobs

Official Product Video

Product Page

Review by reddit /guitarpedals

Review by musicradar

Manual download

Tremolo2

Als der Echoplex® EP-3 auf den Markt kam, waren die Gitarristen begeistert von der Art und Weise, wie sein Vorverstärker ihren Sound aufpeppte. Schon bald fand der EP-3 seinen Weg auf die Platten der besten Gitarristen - von Jimmy Page bis Eddie Van Halen und Eric Johnson -, und zwar sowohl wegen seiner Tonbearbeitungsfähigkeiten als auch wegen seines Bandecho-Effekts. Jetzt kannst du die legendäre geheime Soße des EP-3 direkt auf dein Pedalboard bringen.

Dunlops EP101 Echoplex Preamp stellt die Magie des EP-3 Frontends nach, mit einem Feldeffekttransistor (FET) genau wie das Original und mit dem exakt gleichen Signalweg. Mit dem Gain-Regler können Sie Ihr Signal um bis zu +11 dB anheben, mit leichtem asymmetrischen Clipping bei höheren Einstellungen für ein wenig organischen Grind.

When the Echoplex® EP-3 came out, guitar players were hooked by the way its preamp sweetened up their sound. Soon, the EP-3 made its way onto the records of top guitar players—from Jimmy Page to Eddie Van Halen and Eric Johnson—as much for its tone conditioning ability as its tape echo effect. Now, you can put the EP-3's legendary secret sauce right on your pedalboard.

Dunlop's EP101 Echoplex Preamp recreates the magic of the EP-3's front end, featuring a Field-effect Transistor (FET) just like the original and following the exact same signal path. The Gain control allows you to boost your signal by up to +11dB, with light asymmetrical clipping at higher settings for a bit of nice organic grit.

Dunlop

Review by mylespaul

Review by TDPRI

Demo by StompboxTV

EP101 Echoplex Preamp

PedalSafe Type A1.1

QuickMount Type A

Pedal-Montageplatte für Standard-Einzelpedale

Pedal Mounting Plate For Standard Single Pedals

Schutzabdeckung & RockBoard-Montageplatte für MXR® Standardgröße und Dunlop® Echoplex Delay Pedale

Protective Cover & RockBoard Mounting Plate For MXR® standard size and Dunlop® Echoplex Delay pedals

Schutzabdeckung & universelle Montageplatte für MXR® Standardgröße und Dunlop® Echoplex Delay Pedale

Protective Cover & Universal Mounting Plate For MXR® standard size and Dunlop® Echoplex Delay pedals

Nicolas Wilfer

Die JHS Colour Box V2 ist ein Preamp / DI-Box nach dem Vorbild legendärer Neve Studio-Konsolen. Das Pedal wurde entwickelt um den authentischen Sound eines Instruments (oder Mikrofons) am Direct-In der Mischpulte zu reproduzieren, dabei bietet die Colour Box V2 alle Features der beliebten V1-Version und kommt zusätzlich mit einer Vielzahl an Verbesserungen und neuen Features, die das Pedal zu einem perfekten Allrounder und Always-On Pedal für alle denkbaren Instrumente und sogar für Sänger machen. Zu den neuen Features zählen eine erweiterte EQ-Sektion, ein Hi/Lo Schalter für massiven, cleanen Headroom und die Möglichkeit 48V Phantom-Power an Kondensator-Mikrofone weiterzugeben. Die Gain-Sektion (Rot) bietet Regelmöglichkeiten Master, Pre-Vol und Step. Master kontrolliert das Gesamt-Volume des Pedals, Pre-Vol arbeitet als Gain-Regler zwischen den beiden internen Gain Stages und bietet bei Bedarf eine Verzerrung, die von leichten Break-Up-Sounds bis zu Fuzz reicht. Der Step-Regler verändert das Gain der Preamp Stages in fünf Schritten. Der Hi/Lo Schalter verändert den cleanen Headroom des Pedals, der -20 dB Pad Schalter passt den Input bei Bedarf an Mikrofone mit einem hohen Ausgangspegel an. Die EQ-Sektion (Blau) wurden neben den bekannten Regler für Treble, Middle und Bass (+/- 17 dB Cut / Boost in jedem Band) um drei Shift-Regler erweitert, die den Frequenzbereich der einzelnen Regler anpassen. Die Hi-Pass-Sektion wird über den Kippschalter aktiviert. Um das Pedal so flexibel wie möglich zu halten steht ein kombinierter XLR/TRS Input zur Verfügung.

The JHS Colour Box V2 has all the same functionality of the popular V1 version with many new and improved additions like expanded EQ controls, a Hi/Lo switch for massive clean headroom, and the ability to pass phantom power to your condenser mics. The Gain section in red has three controls: Master, Pre-Vol, and Step. The Master volume controls the overall volume of the unit. The Pre-Vol controls the amount of gain between the two internal gain stages. This acts as a "drive" or "gain" control, adding more grit, distortion, and even fuzz as you increase the gain. The Step control increases the gain of each preamp stage in five stages. Rotating the Step knob from left-to-right will increase the gain by the following: 1st is +18 dB, 2nd is +23 dB, 3rd is +28 dB, 4th is +33 dB, 5th is +39 dB. The JHS Colour Box V2 has a new Hi/Lo switch to control the amount of clean headroom you have available. In the Lo mode, you will easily be able to get ultra clean sounds without breakup. Lo Mode is excellent for tone shaping when distortion is not needed. In the Hi mode, the Colour Box V2 will distort much more readily, giving you a broad spectrum of overdrive, distortion, and fuzz sounds. In addition to the Hi / Lo gain switch, there is a -20 dB pad switch on the right side of the Colour Box V2. This function only works when in XLR input mode and can help tame the volume for high output microphones. The EQ section in blue has three new Shift controls correlating to its standard Treble, Middle and Bass controls. The Shift knobs adjust the range of frequencies that the Treble, Middle, and Bass knobs control. The center frequencies for the Shift knobs are Treble 10kHz, Middle 1kHz, and Bass 120Hz, while the Treble, Middle, and Bass knobs boost or cut with +/- 17 dB of control. If you want to boost high-mid frequencies, turn the Mid Shift knob to 3 o'clock or above and increase the Middle knob above 12 o'clock. If you want to cut upper treble frequencies, turn the Treble Shift knob to 3 o'clock or above and set the Treble knob below 12 o'clock. The Shift knobs give you precision control over the EQ for anything you put through the Colour Box V2. The Hi-Pass section is enabled by the toggle switch below the Hi-Pass knob. Just flip it up to engage the Hi-Pass knob, which spans from 60Hz to 800Hz with a 6dB per octave slope. The Colour Box V2 has a combination XLR and 1/4" input jack to use either an instrument or microphone. Select your input with the input selector switch on the right side of the pedal labeled INST/XLR.

Official Product Page

Manual

JHS Colour Box: A 1073 You Can Take Anywhere - JHS Pedals

Colour Box V2 10 Year Anniversary

The PLASMA Pedal creates heavy distortion by amplifying an audio signal up to 3500 Volts and transforming it into electrical discharges. You are literally playing a bolt of electricity.

Gamechanger Audio

Website

Plasma Pedal

Steven Yon

Ok, so you have eight effects pedals which you use regularly. You use various combinations of these pedals in various songs, but you are not good at tap dancing…or you are just clumsy and have (once or twice) stepped on the ultra tricked out-metalized-distortion pedal for the lead in your one ABBA cover. You have seen the digital effects controllers they use on the big stages, and have secretly yearned for one… even though you may never make the big stage. Enter Thomas Guldmann’s Octa-switch MK3. Your eight effects plug into the eight effects-loops on the back of this unit (all true-bypass, impedance free, gold relays so you can run any of your pedals, new and old without problem), and then by turning on or off the numbered switches in each of eight DIP Bank switches, you determine which effects you wish to use simultaneously in each Bank. There is a blue LED for every effects loop used and for each Bank (so once you are programmed, when you step on Bank 6 you will see the lights of all the effects you have assigned to Bank 6 and the Bank 6 LED). The Octa-switch MK3 has incorporated a couple new features as well! The ninth switch on the left side of the case is a BYPASS Switch….this allows you to completely bypass all eight pedals and enjoy only the unaffected sound of your amplifier. There are also two External Switching jacks which allow you to use two amplifiers and/or switch channels on those amps. Once you have all the Banks programmed, we recommend placing a piece of scotch or electrical tape over each DIP (….just to protect the switch from accidental switching, damage or floods….like beer). There is a buffered (or not….switchable) Mono input and a stereo Output, and the unit is powered by dual 9v batteries, or by a regulated power supply…like the PowerJack or the Pro Power (both by Carl Martin).

Carl Martin

Review by bonedo

Demo by ukguitarnoddle

Demo by EytschPi42

Octa-Switch MK3

BOSS

TU-3S Tuner

The Replicator D’Luxe is a sum up from all the knowledge, we have built up over the years, making
Tape delays.
it is a 2 head machine. The drive mechanism has been updated with a noiseless belt drive. A tape lock/release mechanism is added, to make the pinch wheel and tape last longer and electronics has been tuned to perfection.

T-Rex

Demo by Martin Klaja's Guitarchannel

Demo by Duskmos

Demo by T-Rex Effects

Review by The Gear Page

Review by GEOFF KING, mixdownmag.com.au

Replicator D'LUXE

Cited as a major influence by wah masters such as Hendrix, Clapton, and Vaughn, Buddy Guy helped establish the effect as part of the blues vocabulary. To honor his contributions we have created the Buddy Guy Cry Baby Wah, featuring the Fasel Inductor for a sweet and singing top end, and two distinct user selectable wah voices—choose "DEEP" for a big and throaty growl, or "BG" for Buddy's own warm and bell-like wah tone. Convenient side-mounted LEDs indicate which mode you are in, while a separate LED indicates effect on/off. Let your guitar sing the blues in style with the Buddy-approved polka dot graphics and custom signature tread.

Review by Simon Bradley, musicradar.com

Demo by Guitar World

BG95 Buddy Guy Crybaby Wah

QuickMount Type M

Pedal-Montageplatte für Dunlop Cry Baby Wah-Pedale

Pedal Mounting Plates For Dunlop Cry Baby Wah Pedals

Was ist also dieses verrückte Pedal? Nun, auf den ersten Blick sieht es aus wie viele andere Carl Martin-Pedale... es gibt einen High Gain-Kanal, der jede Menge Bässe und schöne knackige Höhen hat, einen sehr dynamischen Crunch-Kanal, der die Mitten mit sehr wenig Kompression betont, und natürlich den berühmten 12db Boost-Kanal, den wir alle so gut kennen.

So what is this crazy pedal? Well, at first glance it looks like many other Carl Martin pedals…there is a High Gain channel which has loads of bottom end and nice crisp highs, a very dynamic Crunch channel which emphasises the mids with very little compression, and of course that famous 12db Boost channel that we are all so familiar with.

Demo by Musiker TV

Demo by  Victor Hugo Targino

Demo by  The Tone Lounge

Demo by  Six String Alliance (Six String Alliance)

Review by PremierGuitar

Review by Musicradar

Review by Harmony Central

Review by Bonedo

Greg Hoew's Lick Box

James Squire

Der Echo Fix EF-P5 FET Compressor ist ein erstklassiger, vollständig analoger Dynamikprozessor, der sowohl für den Studio- als auch für den Pedalboard-Einsatz konzipiert ist. Inspiriert von klassischen FET-Kompressoren wie dem 1176, verfügt er über hochwertige Eingangs- und Ausgangstransformatoren für einen reichen, warmen Klang. Das Pedal bietet eine breite Palette von Funktionen, darunter schaltbare Kompressionsverhältnisse (4:1, 8:1, 12:1 und 20:1, einschließlich des "All Buttons In"-Modus), einen Mix-Regler für Parallelkompression, einen Hochpassfilter für frequenzselektive Kompression und einen rückseitigen Schalter für einen +20-dB-Gain-Boost. Es verfügt außerdem über unsymmetrische 1/4"-TS-Buchsen und symmetrische XLR-I/O, wodurch es für eine Vielzahl von professionellen Anwendungen geeignet ist.

 The Echo Fix EF-P5 FET Compressor is a premium, all-analog dynamics processor built for both studio and pedalboard use. Inspired by classic FET compressors like the 1176, it features high-quality input and output transformers for a rich, warm tone. The pedal offers a wide range of features including switchable compression ratios (4:1, 8:1, 12:1, and 20:1, including "all buttons in" mode), a mix control for parallel compression, a high-pass filter for frequency-selective compression, and a rear-panel switch for a +20dB gain boost. It also includes both unbalanced 1/4" TS jacks and balanced XLR I/O, making it suitable for a variety of professional applications.

Echo Fix

Demo by Emily Hopkins (Harp Lady)

Demo by Andy Demos

EF-P5 FET Compressor Pedal

Alexander Göbel

The Echo Fix EF-P3 Chorus Vibrato pedal is an analog BBD Chorus pedal with a rich and extended feature set.

Designed to be the ultimate chorus pedal, each control has been extended in range for sonic flexibility. From subtle pitch glides to fast Leslie-style wobbles, the wide range of controls makes this pedal extremely versatile and creative.

Demo by Ponderer Sounds

Demo by  R.J. Ronquillo

Review by Pedal of the Day

Review by delicious audio

Review by SINESQUARES

EF-P3 Chorus/Vibrato

Tom Gumley

The Echo Fix EF-P2 is a real Spring Reverb pedal that packs a huge sound into a small enclosure. The EF-P2 features a three-spring reverb tank, adjustable Spring Drive, Bass / Treble EQ controls, and Reverb Volume control. With a footswitch for reverb bypass and also a direct signal mute footswitch, the EF-P2 can also be used as an outboard effect in recording studios. The EF-P2 can accept audio signal from synths and other audio devices, not just guitar.

Demo by Demos in the Dark

Demo by R.J. Ronquillo

Review by AMAZONA

EF-P2 Spring Reverb

Für 10-20 FX-Pedale, 1 MOD-Slot - **622 x 424 mm / 24.49" x 16.69"** - erhältlich mit Gig Bag oder Flight Case

For 10 - 20 FX pedals, 1 MOD slot - **622 x 424 mm / 24.49" x 16.69"** - available with Gig Bag or Flight Case

When we released our original Compressor back in 2011, it quickly became a favourite among guitar and bass players alike who were searching for something more than the typical oversimplified controls found on most compressor pedals. Although our original Compressor sounded great on bass (and still does!) we set out to do even better. 
On top of the full range of features and controls normally only seen in high end studio equipment, such as input and gain reduction metering, independent attack and release controls, a mix knob for parallel compression, and an external sidechain insert, we’ve now added a fully variable sidechain high pass filter, and a two position ‘tone + colour’ circuit which adds gentle tone sculpting and harmonic distortion, giving your bass some delicious character.  

Review by bassic

Review by CompressorPedalReviews

Demo by Pertybass

Demo by BassTheWorld.com

Bass Compressor Blue Sparkle

Das Empress ParaEq MKII Deluxe ist ein parametrischer EQ und Boost-Pedal in Studioqualität, das für Gitarre, Bass, Synthesizer und andere Instrumente entwickelt wurde. Es bietet drei vollständig parametrische EQ-Bänder mit einstellbarer Frequenz, Verstärkung und durchstimmbarer Q-Einstellung für präzise Klangformung. Es verfügt über Baxandall-artige High-Shelf- und Low-Shelf-Shelving-Filter sowie umschaltbare 12-dB/Oktave-Hochpass- und Tiefpassfilter für eine fein abgestimmte Klangregelung. Eine Clean-Boost-Sektion ist ebenfalls enthalten und liefert bis zu +30 dB Signalverstärkung, um Verstärker oder lange Signalketten anzusteuern. Der Signalweg bleibt vollständig analog und rauschoptimiert und bietet auch bei intensiver Nutzung einen hohen Headroom und Transparenz. Das Pedal unterstützt je nach Ihren Routing-Anforderungen einen wählbaren True-Bypass- oder Buffered-Bypass-Modus.

The Empress ParaEq MKII Deluxe is a studio-grade parametric EQ and boost pedal designed for guitar, bass, synth or other instruments. It offers three fully parametric EQ bands with adjustable frequency, gain, and sweepable Q settings for precise tone shaping. It adds Baxandall-style high-shelf and low-shelf shelving filters plus switchable 12 dB/octave high-pass and low-pass filters for refined tone control. A clean boost section is included, delivering up to +30 dB of signal boost to drive amps or long signal chains. The signal path remains fully analog and noise-optimized, providing high headroom and transparency even under heavy use. The pedal supports a selectable true-bypass or buffered-bypass mode depending on your routing needs.

Demo by Pete Thorn

Demo by AndyDemos

Review by Bass Gear Magazine

Review by Guitar Chalk

Para Eq MKII Deluxe

Der Empress Effects Buffer ++ ist ein hochwertiges Analog-Routing- und Buffer-Pedal, das entwickelt wurde, um ein unverfälschtes Signal zu bewahren und gleichzeitig flexible Routing-Optionen zu bieten. Es kombiniert transparente Buffer-Schaltungen mit leistungsstarken Utility-Funktionen, einschließlich zwei Eingängen mit unabhängigen Pads und Anzeige, zwei stereofähigen Effekt-Loops, transformatorisch isolierten Ausgängen zur Brummunterdrückung und mehreren internen Routing-Modi für vielseitige Pedalboard-Konfigurationen. Mit dediziertem Tuner-Ausgang, variabler Eingangslastung und schaltbarem Clean-Boost fungiert der Buffer ++ als umfassende Signalzentrale für komplexe Setups.

The Empress Effects Buffer ++ is a high-end analog signal routing and buffering pedal designed to maintain pristine tone while giving players flexible routing options. It combines transparent buffer circuits with powerful utility features including dual inputs with independent pads and metering, two stereo-capable effects loops, transformer-isolated outputs for hum rejection, and multiple internal routing modes for versatile pedalboard configurations. With dedicated tuner output, variable input loading, and footswitchable clean boost, the Buffer ++ serves as a comprehensive signal management hub for complex rigs.

Buffer++

Along with the white-on-black graphics, the pedal offers all the features that made the ParaEq MKII Deluxe our top-selling pedal of 2023, with 3 parametric EQ bands, 4 additional filters, 30dB of footswitchable boost, 27V internal operation for pristine headroom, and your choice of true or buffered bypass.  