Breandan Malone

Board I made for my acoustic and hollow body bass gigs

Acoustic/Hollow Body Bass Board

Der Amptweaker DepthFinder ist ein aktives Boost-EQ-Pedal, das die Resonanz- und Präsenzregler eines Röhrenverstärkers simuliert, ohne dass dies im Endverstärker durchgeführt werden muss. Das bedeutet, dass Sie den DepthFinder zusammen mit einem Verstärker verwenden können, der keine Resonanz und Präsenz hat, indem Sie es in FX-Loop einschleifen oder hinter den Overdrive-Pedalen im Signalweg anordnen. Der DepthFinder eignet sich auch hervorragend für Pedalboard-Signale, da dieser niedrige Dämpfungsfaktor ein wichtiger Bestandteil des Gesamttons ist. Er kann einen Solid-State-Verstärker besser klingen lassen und sich eher wie ein Röhrenverstärker anfühlen. Er kann die Bandbreite sogar erweitern, da er die sehr tiefen und sehr hohen Frequenzen verstärkt. Der DepthFinder kann auch mit jedem Pedalboard-Looper-System verwendet werden, so dass er für bestimmte Presets, die lebendiger oder druckvoller klingen sollen, in den Signalweg des Pedalboards aufgenommen werden kann.

The DepthFinder is an active boost-only EQ pedal that simulates the tube amp Resonance and Presence controls, but without having to be done in the power amp. This means you can use it with an amp that doesn’t have Resonance and Presence, by patching it in the effects loop. It also works great for building a pedalboard direct signal, since that low damping factor is a key ingredient to the overall tone. It can easily make a solid state amp sound and feel more like a tube amp, and can actually widen the bandwidth since it boosts at very low and very high frequencies.

Amptweaker

Official Product Page

Manual

Amptweaker  DepthFinder - Official Demo

Amptweaker DepthFinder - Review by Gitarre & Bass [DE], [03-2019]

Review by Guitar World

Review by bonedo

Demo by gearmandude

DepthFinder

The Fishman AFX AcoustiVerb is a reverb pedal designed from the ground up for the acoustic-electric guitarist, melding a tasteful tone with Fishman’s signature sonic architecture. All three of this pedal’s studio-grade reverb patches — Hall, Plate, and Spring — were precisely tweaked by Fishman to provide you with a beautiful array of echoes that perfectly complement your acoustic’s natural tone without washing it out. Plus, a 3-knob design comprised of Level, Tone, and Decay Time offers a straightforward operation that’s easy to quickly tweak onstage. If you’re after beautiful, cascading echo tones without compromising your acoustic’s inherent character

Fishman

Product Page

Review by musicradar

Review by Premier Guitar

Demo by Fabian Holland

Official Product Video

AFX AcoustiVerb

David Litaba

The Stanley Clarke Signature Acoustic Preamp is a 2-channel preamp, built exclusively with premium components. It is engineered and designed by EBS together with the legendary bass player and composer Stanley Clarke.

Demo by Bass Bonedo

Demo by EBSSweden

Stanley Clarke Signature Acoustic Preamp

Carrying on the POLYTUNE legacy, POLYTUNE 3 MINI packs an unprecedented amount of tuning power into a tiny footprint without sacrificing essential features, such as always-on mode and our audiophile BONAFIDE BUFFER circuit for uncompromised tones – making it ideal for fully-loaded pedal boards where every inch counts!

TC Electronic

Review by AMAZONA 

Review by GUITAR World 

Review by bonedo 

Demo by TC Electronic 

Demo by Guitar World 

Polytune 3 Mini

QuickMount Type L

Pedal-Montageplatte für Standard-Mini-Pedale

Pedal Mounting Plate For Standard Mini Pedals

Tester

Electro-Harmonix

Platform Stereo Compressor

PedalSafe Type C

QuickMount Type C

Pedalmontageplatte für große vertikale Pedale

Pedal Mounting Plate For Large Vertical Pedals

Schutzabdeckung & RockBoard-Montageplatte für große vertikale Pedale

Protective Cover & RockBoard Mounting Plate For Large Vertical Pedals

Schutzabdeckung & universelle Montageplatte für große vertikale Pedale

Protective Cover & Universal Mounting Plate For Large Vertical Pedals

Für 4-7 FX-Pedale - **470 x 142 mm / 18.50" x 5.59"** - erhältlich mit Gig Bag oder Flight Case

For 4 - 7 FX pedals - **470 x 142 mm / 18.50" x 5.59"** - available with Gig Bag or Flight Case

Dave Sahanaja

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 1 V2 ist eine Pass-Through-Box, die speziell für Gitarristen und Bassisten entwickelt wurde. Du kannst das MOD 1 V2 nutzen um mehrere Pedale deines Setups im Front End und im Effekt-Loop des Verstärkers zu postieren (4-Kabel Methode) oder die vier TRS-Anschlüsse als zentralen Zugang und Ausgang des Boards nutzen. Die XLR-Through-Verbindung kann als Signalausgang vom Pedalboard zum Mischpult oder zur PA verwendet werden.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 5 x 6,3 mm TRS thru
- 1 x XLR thru (männlich vorne / weiblich hinten)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 5 x 6,3 mm / ¼" TRS thru
- 1 x XLR thru (male front / female back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR, IEC & Barrel Patchbay

Orchestral  Pedal Board

The Ernie Ball Most Valuable Pedal provides a super smooth foot sweep, ideal for precise volume control with no high-frequency loss at any volume. Designed to maximize versatility, this pedal works with both active and passive electronics and is equipped with a minimum volume knob as well as a powerful gain boost, allowing players to increase the audio signal up to +20 decibels. And of course, as you've come to expect, the Ernie Ball MVP boasts a compact, rugged design, consisting of aircraft grade aluminum housing that is virtually indestructible. Requires DC 9V/100mA minimum power supply or 9V battery.

Ernie Ball

Demo by  Mr Z's Music Lessons

Demo by Algam EKO

Review by delicious audio

6182 MVP Mono Volume Pedal, 250k

Der One Control BJF Buffer Split verfügt über mehrere Funktionen, die das Pedal zu einer äußerst vielseitigen Utility-Box für Pedalboards machen. Das Pedal kombiniert die Funktionen der 1 Loop Box und der AB Box mit einem schaltbaren Buffer. Der BJF Buffer Split kann als A/B Switch, True Bypass Loop Switcher, Splitter oder sogar als Input Selector verwendet werden. Die seitlich angebrachten Schalter schützen die Einstellungen vor unerwünschten Änderungen und der schaltbare Buffer verhindert Signalverlust bei langen Signalwegen oder großen Effekt-Setups.

The One Control BJF Buffer Split has multiple functions which makes it an extremely versatile utility box to have on your pedalboard. It combines the functions of the 1 Loop Box and AB Box with a switchable buffer. The BJF Buffer Split can be used as A/B switch, true bypass loop switcher, splitter or even as an input selector. The side-mounted switches protect the settings from unwanted changes and the switchable buffer prevents signal loss at long signal paths or large effect setups.

One Control

Review by Chris Hauke, gitarrebass.de

Minimal Series BJF Buffer Split

Combo

BP1 Compact packt die Essenz unseres BP1 Bass-Preamps in ein kompaktes Stompbox-Format. Der Kernklang und das geringe Rauschlevel bei deutlich kleinerer Stellfläche!


BP1 Compact crams the essence of our BP1 Bass Preamp into a compact stompbox. The core tone and low noise level at a much smaller footprint!

Caveman Audio

Demo by Gregor Fris

Review by Bass Musicians Magazine

Review by Sound On Sound

Quick Start Guide

BP-1 Compact

ch ray

Freeze

PedalSafe Type A1.1

QuickMount Type A

Pedal-Montageplatte für Standard-Einzelpedale

Pedal Mounting Plate For Standard Single Pedals

Schutzabdeckung & RockBoard-Montageplatte für MXR® Standardgröße und Dunlop® Echoplex Delay Pedale

Protective Cover & RockBoard Mounting Plate For MXR® standard size and Dunlop® Echoplex Delay pedals

Schutzabdeckung & universelle Montageplatte für MXR® Standardgröße und Dunlop® Echoplex Delay Pedale

Protective Cover & Universal Mounting Plate For MXR® standard size and Dunlop® Echoplex Delay pedals

Igor Katkov

Der Little Lehle III ist ein universelles Schalt- und Effekt-Looping-Tool, das für ein transparentes Signalrouting entwickelt wurde. Er verfügt über eine Mikrocontroller-gesteuerte True-Bypass-Relais-Schaltung mit aktiver Pop-Unterdrückung, um Schaltgeräusche zu eliminieren. Das Gerät verarbeitet Mono-, Stereo- und symmetrische Signale und kann als Effekt-Looper, A/B-Umschalter für Instrumente oder Verstärker oder als Tuner-Mute fungieren. Es bietet drei Betriebsmodi: Latching, Momentary und einen Mischmodus für kreative Stottereffekte. Das Gehäuse verwendet einen speziellen pilzförmigen Taster, der den Druck über eine Feder überträgt, um die interne Platine vor mechanischer Belastung zu schützen.

The Little Lehle III is a universal switching and effects looping tool designed for transparent signal routing. It features a microcontroller-controlled true bypass relay circuit with active pop suppression to eliminate switching noise. The unit handles mono, stereo, and balanced signals, allowing it to function as an effects looper, an A/B switcher for instruments or amplifiers, or a tuner-mute. It includes three operating modes: latching, momentary, and a mixed mode for creative stutter effects. The enclosure uses a unique mushroom-shaped button that transmits pressure via a spring to protect the internal circuit board from mechanical stress.

LEHLE

Thomann

Review by Thomas Dill

Official manual

Little Lehle III

David Graves

The CompIQ TWAIN MK2 is an advanced tool for analog dynamic audio processing of bass, guitar, and keyboard signals, among other applications. Its extensive features provide exceptional control over compression parameters, enabling users to achieve outstanding sound quality and tonal characteristics. With its Auto Timing settings, the TWAIN is easy to set up and adjust for professional results. At the the flip of a switch, the TWAIN can function either as a dual-band compressor/limiter with a variable crossover point or as two stacked compressors with separate controls for each.

The optional DITOS Transformer-Coupled Balanced Output DI is available as an add-on. Built with Burr-Brown™ technology and advanced line drivers, the DITOS provides complementary signal conditioning and a warm musical voicing to any instrument.

Becos FX

Review by Compressor Pedal Reviews

Review by Sound on Sound

Review by Guitar.com

Demo by the wetter bass

CompIQ TWAIN MK2

Nathan Rapheld

Seit über 75 Jahren vertrauen einige der größten Namen auf der Bühne und im Studio auf Peterson als Maßstab in Sachen Stimmpräzision. Der StroboStomp Mini™ bietet die unübertroffene Stimmgenauigkeit von 0,1 Cent aller authentischen Peterson Strobe Tuner im Format eines Mini-Pedaltuners. Mit einem hochauflösenden LCD-Strobe-Display mit variabler LED-Farbhintergrundbeleuchtung klingen Ihre Instrumente nie besser gestimmt. Ein True-Bypass-Modus ohne Knackgeräusche und ein gepufferter Ausgabemodus geben Ihnen die Kontrolle über Ihren kostbaren Klang ohne Kompromisse. Mit über 80 exklusiven Sweetened Tunings® und Guided Tunings an Bord können Sie Ihren Sound einstellen und stimmen wie die Profis!

For over 75 years, Peterson has been trusted by some of the biggest names on stage and in the studio as the standard in tuning precision. The StroboStomp Mini™ delivers the unmatched 0.1 cent tuning accuracy of all authentic Peterson Strobe Tuners in a mini pedal tuner format. Featuring a high-definition LCD strobe display with variable LED color backlight, your instruments will never sound more in tune. A pop-less true bypass mode and a buffered output mode place you in command of your precious tone without compromise. With over 80 exclusive Sweetened Tunings® and Guided Tunings on-board, you'll be able to dial in your sound and tune like the pros!

Peterson

Review by reddit /guitarpedals

Review by guitar pedal X

Demo by The Time Preservation Society

Strobostomp Mini

QuickMount Type UV

Universal-Pedal-Montageplatte für vertikale Pedale

Universal Pedal Mounting Plate For Vertical Pedals

CIOKS

AC10

Für 5-10 FX-Pedale, 1 MOD-Slot - **442 x 236 mm / 17.40" x 9.29"** - erhältlich mit Gig Bag oder Flight Case

For 5 - 10 FX pedals, 1 MOD slot - **442 x 236 mm / 17.40" x 9.29"** - available with Gig Bag or Flight Case

Jack Thomas

Jack

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 3 V2 ist eine Patchbay für Sänger und Akustik-Musiker. Über die zwei XLR-Ausgänge kannst du ein Stereo-Signal von dein MOD senden und an den XLR-Eingang lässt sich ein Mikrofon anschließen. Mit drei TRS-Through-Verbindungen lässt sich das MOD 3 V2 außerdem als zentraler Zugang und Ausgang des Boards nutzen um zum Beispiel Effektpedale in den FX-Loop eines Verstärkers einzuschleifen.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 3 x 6,3 mm TRS thru
- 2 x XLR thru (männlich vorne / weiblich hinten)
- 1 x XLR thru (weiblich vorne / männlich hinten)
- 1 x DC 2,1 x 5,5 mm Hohlstecker thru
- 1 x AC IEC thru (männlich vorne / weiblich hinten)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel


The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 3 V2 is a pass-thru box designed for use by vocalists and acoustic players. The 2x XLR outputs allow you to send a stereo signal from your MOD and the 1x XLR input can be used to connect your microphone. You can also use it to run several pedals from your board through the effects loop of your amp, or simply use the MOD as a central access point to your pedalboard.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 3 x 6,3 mm / ¼" TRS thru
- 2 x XLR thru (male front / female back)
- 1 x XLR thru (female front / male back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR Patchbay for Vocalists & Acoustic Players

Electrical & Upright Bass Pedal Board Set Up

Das MXR M89 Bass Overdrive ist ein vielseitiges Overdrive-Effektpedal für E-Bass, dessen Metier röhrenartige Sounds sind. Hierbei bestimmt der Drive-Regler die Zerrintensität der analogen Schaltung, vom subtilen Anfetten des Signals bis hin zum saftigen Grind für Rock oder Metal. Während der Tone-Regler das Einstellen der Klangfarbe gestattet, ermöglicht der Dry-Regler des MXR M89 Bass Overdrive das Zumischen des Clean-Signals, sodass Definition und Druck der tiefen Töne erhalten bleiben.

The MXR M89 Bass Overdrive pedal gives you the fat and gritty punch you want plus the control you need to make it work with the rest of your bass rig. Designed specifically to handle the added low frequency of your bass, the M89 Bass Overdrive just gets beefier the harder you hit in and will never get anemic the way a guitar overdrive pedal will. With a broad range of drive at your command, the M89 lets you dial in anything from a touch of grit to full-throttle fuzz. The Clean control lets you blend in as much clean sound as you like, allowing you to preserve your transients and fill out the bottom end. If you want punch, drive, grit, and control, then you'll be glad you grabbed an MXR M89 Bass Overdrive pedal from Sweetwater.

Demo by thebasschannel 

Demo by jimdunloopusa 

Review by bass gearmag 

M89 Bass Overdrive

40 years ago, in a tiny town in Denmark, two brothers planted a sonic seed – and the SCF STEREO CHORUS FLANGER was born!
A chorus pedal so great and so far ahead of its time – that it single-handedly shaped the destiny of TC ELECTRONIC.

In celebration of our 40th anniversary – and to honor this legendary piece of kit – we’ve created a special limited run of the CORONA CHORUS (only 2,000 units), which sees the CORONA take on the sleek, iconic look of the original SCF pedal.

To ensure it doesn’t just look the part, we’ve meticulously recreated the lush, all-enveloping chorus, pitch-mod and flanger tones of the original, now available as TonePrints, ready to beam to your CORONA CHORUS – absolutely free of charge!

Review by

Demo by CS Guitars 

Corona Chorus

The MXR Bass Envelope Filter delivers classic analog envelope filter sounds in an easy-to-use and compact pedal designed specifically for bass. Separate Dry and Effect controls let you dial in the perfect mix of effected and direct signals, so you can bring the funk without losing the low end. Its wide range of filter tones can be shaped with the Decay and Q controls, and a simple twist of the Sensitivity knob can tailor the pedal for your attack—as well as adjust for passive or active basses. The Bass Envelope Filter's power supply circuitry is designed to withstand over-voltage or polarity mishaps, and its true-bypass switching preserves your tone in bypass mode. It's all packaged in a durable, lightweight, Phase 90-size aluminum housing for the ultimate in portability and pedalboard space-saving dimensions.

Review by Talk Bass.com

Demo by The Bass Chanel

Demo by Bass Whisperer TV

M82 Bass Envelope Filter

M288 Bass Octave Deluxe

When it was introduced in 2010, the original POLYTUNE forever revolutionized the way musicians tune their instruments. Praised by professional and amateur players, guitar tuning instantly became as simple as Strum - Tune - Rock! So how do you make the best-selling polyphonic tuner even better? You take it to the next level by: providing multiple tuning modes, including polyphonic, chromatic, strobe and a variety of altered tunings; adding an onboard BONAFIDE BUFFER to preserve your tone over long cable runs and pedal board signal paths; and upgrading the LED display for even higher tuning accuracy. Say hello to your next tuner – POLYTUNE 3.

Review by Charleston Classical Guitar

Demo by American Musical Supply

Demo by Addicted to Gear

Demo by realbeal

Polytune 3

PedalSafe Type G

QuickMount Type G 

Pedal-Montageplatte für Standard TC Electronic Pedale

Pedal Mounting Plate For Standard TC Electronic Pedals

Schutzabdeckung & RockBoard Montageplatte für Standard TC Electronic Pedale

Protective Cover & RockBoard Mounting Plate For Standard TC Electronic Pedals

Schutzabdeckung & universelle Montageplatte für Standard TC Electronic Pedale

Protective Cover & Universal Mounting Plate For Standard TC Electronic Pedals

BOSS

DD-7 Digital Delay

PedalSafe Type E1

QuickMount Type E

Pedal-Montageplatte für Standard-Boss-Pedale

Pedal Mounting Plate For Standard Boss Pedals

Schutzabdeckung & RockBoard-Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & RockBoard Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Schutzabdeckung & universelle Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & Universal Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Kompressor Pedal für E-Bass
CHT "Constant Headroom Technology" für klare und saubere Tonqualität
Regler für Output, Input, Release, Attack und Ratio 
Led Kette mit 10 LED für "Gain reduction" Anzeige
Status-LED
True Bypass
stabiles Metallgehäuse
Betrieb mit 9V-Batterie oder Dunlop ECB-003 AC Adapter (optional)
Made in USA


Take your favorite studio compressor to the stage with the MXR M87 Bass Compressor. A complete array of controls (Attack, Release, Ratio, Input, and Output) makes it easy to fine-tune your sound, from subtle peak limiting to hard squashed compression effects. Its Constant Headroom Technology gives you plenty of headroom and clear performance. This totally transparent compressor allows your full dynamic range to shine through until your signal reaches the compression threshold, which is indicated by the ten, highly visible gain-reduction status LEDs. It´s all packed into a durable, lightweight aluminum-housing pedal that´s the size of a Phase 90.

Review by awkwardsounds

Review by PREMIER Guitar 

Review by Compressor PedalReviews

Official Product Video 

Demo by Bass The World 

M87 Bass Compressor

Truetone

1 Spot Pro CS6

Für 7-12 FX-Pedale, 1 MOD-Slot - **470 x 330 mm / 18.50" x 12.99"** - erhältlich mit Gig Bag oder Flight Case

For 7 - 12 FX pedals, 1 MOD slot - **470 x 330 mm / 18.50" x 12.99"** - available with Gig Bag or Flight Case

Zachary Keen

Use for Musicals with inputs for electric, Fretless, Upright mic, and upright pickup. XLR outputs for electrics and xlr for upright. with a summing amp to combine them to 1 input for using with an amp.

Fretless

Musical Theatre Bass Pedal Board

Mixer Electric

Mixer Upright

Lee Atkin

Der BM‑13 PHASER fängt den üppigen, schwebenden Klang des Moog MF‑103 in einer vollanalogen Stompbox ein.
Mit umschaltbaren 6‑ oder 12‑Stufen‑Phasern erzeugt er alles von dezentem Glitzern bis hin zu tiefen, kosmischen Sweeps.
Drive‑, Sweep‑, Resonance‑, LFO‑Amount‑ und Rate‑Regler erlauben dynamische Klangformung direkt am Pedal.
Stereo‑ und Aux‑Ausgänge sowie CV‑/Expression‑Eingang bieten vielseitige Routing‑ und Steueroptionen.
Robustes Metallgehäuse und True Bypass garantieren zuverlässige Bühnen‑Performance ohne Klangverlust.
Ob Vintage‑Funk oder moderne Klanglandschaften – der BM‑13 entfacht grenzenlose Kreativität.

The BM‑13 PHASER channels the lush, swirling tones of Moog’s legendary MF‑103 in an all‑analog stompbox rebuilt for today.
With switchable 6‑stage or 12‑stage phasing, it covers everything from subtle shimmer to deep, cosmic swooshes.
Drive, Sweep, Resonance, LFO Amount, and Rate controls let you sculpt dynamic, expressive sweeps at your feet.
Add stereo depth with the Aux output, or sync effects via Expression/CV input for hands‑free modulation.
Rugged metal construction and true bypass ensure road‑ready reliability without tone loss.
Whether for vintage funk riffs or modern ambient landscapes, the BM‑13 inspires endless exploration.

Behringer

Review by Guitar Bomb

Review by Gear News

Demo by Adam Husk

BM-13-Phaser

Dave Snippe

Want quick access to FS4 and FS5 on your HX Stomp, but don't want to lose any more pedalboard space? Then this is the solution for you!

Simply attach the Helauxy to your Stomp via the pre-applied double-sided 3M VHB tape adhesive. Our switch was designed to not interfere with any of the other controls on the front of the HX Stomp. You still have full access to all buttons and knobs.

Pedalnetics

Helauxy Duo Mini Pro

OC-3 Super Octave

andronik supersonik

Die StageBug SB-2 ist eine kompakte passive Direktbox, die sich perfekt für aktive Bässe und Keyboards eignet. Sie ist klein genug, um in einem Instrumentenkoffer Platz zu finden, und verfügt über eine Stereo-Mono-Mischfunktion, um Mischpultkanäle einzusparen.

The StageBug SB-2 is a compact passive direct box that is perfect for active basses and keyboards, is small enough to fit inside an instrument case, and features a stereo to mono mix function to save mixer channels.