Anthony Camplone

Combustion

Stoner bass pedalboard

AD200 MK 3

thuy nguyen

The Red Muck puts on a few pounds, grows a new set of sharp teeth and is out to seduce even the most demanding Muff connoisseurs!

A Fuzz-Distortion pedal, inspired from the circuits of the ’71 “triangle” and the later “Red Army / Civil War” Muff. Along with our individual touch, the end result boasts a smoother sound, fatter low end, pronounced midrange and added tonal flexibility through the expanded range of the tone knob. The onboard MIX control allows you to discover your sweet- spot of the Dry / Wet signal ratio, while the second footswitch turns it into a 2-gain-stage pedal!

This pedal is equally capable at fuzzing things up just a bit to add some vintage wooly fatness to your bass lines, as it is at shooting those heavy riffs into sizzling yet controlled mayhem!

Jam Pedals

Review by Tone Pedia

Review by Talk Bass.com

Product Page

Manual

Demo by Janek Gwizdala

Demo by Nate Navarro

Demo by BassTheWorld

Red Muck Bass

PedalSafe Type B3

QuickMount Type B1

Pedal-Montageplatte für FRIEDMAN, KEELEY Halo, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD, Jupiter V2 und Mooer GL 100 Pedale

Pedal Mounting Plate for FRIEDMAN, KEELEY Halo, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD, Jupiter V2 and Mooer GL 100 pedals

Schutzabdeckung & RockBoard-Montageplatte für WALRUS MAKKO D1 Pedale

Protective Cover & RockBoard Mounting Plate For WALRUS MAKKO D1 pedals

Schutzabdeckung & universelle Montageplatte für WALRUS MAKKO D1 Pedale

Protective Cover & Universal Mounting Plate For WALRUS MAKKO D1 pedals

Tuwi Yuwi

The Lucydreamer is a Dry / Wet overdrive created with today’s bass masters’ needs and wants in mind.

It packs the following functions / features:

Dry / Wet Mix control

High-gain-stage footswitch which doesn’t affect the dry signal’s level

Internal trimmer to set the high-gain stage’s output level

Its overdrive circuit can track every little nuance of your playing with a wide gain-stage spectrum, ranging from highly dynamic tube-amp-like break-up, all the way to full- bodied high-gain saturation!

Owing its clipping merits to our “secret” chip, the Lucydreamer fluently tackles all the traditional tasks of an overdrive pedal and at the same time invites you to discover new ways of bonding with your bass lines!

Widen your palette of sounds, minimize pedalboard real estate and elevate your tone with the Lucydreamer!

Review by reddit /basspedals

Demo by Zachary Rizer

Demo by Patrick Hunter

Demo by BassTheWorld.com

LucyDreamer Bass

ch ray

The JPTR FX Double Jive is a compact and versatile effects pedal that delivers an incredible range of tones and effects. With two separate channels and a variety of customizable controls, this pedal is perfect for guitarists and bassists who are looking to take their sound to the next level.

Whether you're looking to add some extra crunch to your riffs or want to create a more atmospheric sound, the JPTR FX Double Jive has got you covered. With its intuitive controls and high-quality components, this pedal allows you to dial in the perfect sound for any situation.

JPTR FX

Demo by John Browne

Demo by Obrad Lacarac

Review by Gitarre & Bass

Review by Tim schraubt Bass

Review by Gearspace

Double Jive

Line 6 HX Stomp ist ein professioneller Gitarrenprozessor, der den Klang von Helix-Verstärkern, -Boxen und -Effekten in einem ultrakompakten Pedal liefert. Egal, ob Sie lieber ein traditionelles Amp-and-Pedal-Setup spielen oder direkt auf die Bühne oder ins Studio gehen, HX Stomp lässt sich nahtlos in eine Vielzahl von Umgebungen und Anwendungen integrieren. Das HX Stomp-Gitarrenpedal verwendet dieselbe DSP- und HX-Modellierungstechnologie wie seine größeren Helix-Brüder und passt dennoch problemlos auf Ihr Pedalboard oder sogar in die Tasche Ihres Gigbags. Es gibt über 300 Ampere, Kabinen und Effekte – einschließlich eines Loopers. HX Stomp enthält dieselben HX-Modelle wie die Produkte der Helix-Familie sowie die Legacy-Effektbibliothek der Line 6 M-Series-Pedale und Stompbox-Modellierer wie den DL4. Verwenden Sie es als "Super-Stompbox", als Backup- oder Travel-Rig, als zusätzlichen Tonexpander in Kombination mit anderen Modellierern, als Audio-Interface - oder sogar als komplettes Gitarren- oder Bass-Rig.

Line 6 have been at the forefront of the digital modelling world for over 20 years now, pushing the boundaries of guitar technology is nothing new for them and their flagship product, the Helix, has taken the guitar world by storm. With the scaled down Helix, the HX, becoming a go to for players, its latest version, the HX Stomp is sure to generate loads of interest!

The HX Stomp is the ultimate streamlined version of this superstar pedal. Constructed as a 3 pedal unit, the HX Stomp features the same processor as the Helix, meaning you get over 300 effects including legacy lines from the M Series, 8 simultaneous amp, cab and effects blocks, TRS dual expression pedal inputs and a stereo effects loop, it's a serious pedal!

It's super comprehensive but really user intuitive. Built with the working player in mind, it has a solid aluminium construction that can take the rigours of the road, perfect on stage or in the studio, the Helix is the future of multi effects.

LINE 6

Review by musicradar

Review by bonedo

Official Product Video

Demo by Guitar Bonedo

Demo by Bernd Kiltz - Gitarrenvideos

HX Stomp Black

PedalSafe Type L6

QuickMount Type L6

Pedal-Montageplatte für LINE6 HX Stomp Pedale

Pedal Mounting Plate for LINE6 HX Stomp pedals

Schutzabdeckung & RockBoard-Montageplatte für LINE6 HX Stomp Pedale

Protective Cover & RockBoard Mounting Plate For LINE6 HX Stomp pedals

Schutzabdeckung & universelle Montageplatte für LINE6 HX Stomp Pedale

Protective Cover & Universal Mounting Plate For LINE6 HX Stomp pedals

Tester

Ibanez

Demo by Desert Rock United 

BIGMINI

QuickMount Type K

Pedal-Montageplatte für Mooer Micro Series Pedale und ToneX One

Pedal Mounting Plate For Mooer Micro Series Pedals and ToneX One

Teeratai Kaewmanee

 
BC1 is not like the standard bass compressor pedal. Not by a longshot!
We like the idea of using a compressor as an always-on Master Compressor – at the end of the signal chain. A compressor that tames and gently shapes the overall dynamics, giving you a pristine bass tone that makes you sound better, sit better in the mix and simply makes playing more fun!

BC1 is a 100% analog Master Compressor that makes the output from your strings more even and brings out all of the small nuances in your playing.

Caveman Audio

Quick Start Guide

Demo by Caveman Audio

BC1 Bass Compressor

Combo

BP1 Compact packt die Essenz unseres BP1 Bass-Preamps in ein kompaktes Stompbox-Format. Der Kernklang und das geringe Rauschlevel bei deutlich kleinerer Stellfläche!


BP1 Compact crams the essence of our BP1 Bass Preamp into a compact stompbox. The core tone and low noise level at a much smaller footprint!

Demo by Gregor Fris

Review by Bass Musicians Magazine

Review by Sound On Sound

BP-1 Compact

Für 7-12 FX-Pedale, 1 MOD-Slot - **470 x 330 mm / 18.50" x 12.99"** - erhältlich mit Gig Bag oder Flight Case

For 7 - 12 FX pedals, 1 MOD slot - **470 x 330 mm / 18.50" x 12.99"** - available with Gig Bag or Flight Case

Small Bass Pedalboard

Inspiriert vom 71er „Triangle“ und den späteren „Red Army / Civil War“ Muffs, bietet der Red Muck eine breitere Palette an Sättigung und verschiedene Grade an Kompression und Sustain.
Der Boost-Fußschalter aktiviert einen speziellen Teil des Schaltkreises, der separat abgestimmt ist, um das vordere Ende des Red Muck zu treffen und noch fettere Wände aus Fuzz-Verzerrung zu erzeugen, oder bei niedrigerer Gain-Einstellung als High-Gain-Stage-Fußschalter zu fungieren.

Inspired by the ’71 “triangle” and the later “Red Army / Civil War” Muffs, the Red Muck boasts a wider gamut of saturation and varied degrees of compression and sustain on tap.
The Boost footswitch engages a dedicated section of the circuit, separately tuned to hit the front end of the Red Muck and generate even fatter walls of Fuzz-Distortion or with the Gain set lower, function as a High-Gain-Stage footswitch.

Demo by Pedals & Friends

Demo by JayLeonardJ

Review by Audiofanzine

Review by Delicious Audio

Red Muck mk.2

Für 7-12 FX-Pedale, 1 MOD-Slot - **598 x 236 mm / 23.54" x 9.29"** - erhältlich mit Gig Bag oder Flight Case

For 7 - 12 FX pedals, 1 MOD slot - **598 x 236 mm / 23.54" x 9.29"** - available with Gig Bag or Flight Case

andronik supersonik

cavebitch-2

Suwannaphum Padsapan

REDDI is a fire-engine red tube direct box with an unquestionable quality of sound. This is best foot forward in giving the audio world a truly remarkable product at an affordable price.

The REDDI has been field tested and referred by recording engineers to be the "best tube DI ever made".

With wider bandwidth and just the right amount of gain, the REDDI stands clear and clean above the competition.

Great for Basses, Guitars, Synths and electronic instruments that require a direct box for recording, the REDDI is READY to give you unsurpassed sound for that perfect recording or live performance.

A-Designs

REDDI

BOSS

TU-3S Tuner

The micro-Thumpinator is a bandwidth optimizer designed for bass guitar. It removes the low frequency signals that are outside the range of notes produced by the instrument.

Infrasonic frequencies cannot be reproduced by standard bass cabinets but they often make amplifiers clip, especially when they are set to boost the lower frequencies. The Thumpinator filters the signal content optimising the energy delivered by the amplifier. Low-frequency clip is substantially reduced and the sound is tighter especially at high volume levels.

The micro-Thumpinator accepts instrument and line level signals. It can be used between preamplifier and amplifier, between bass and amplifier or anywhere in the effect chain (line or instrument level). It can also be connected directly to an audio interface.

SFX Sound

Demo by Paul Reich

micro-Thumpinator v2

Andrea De Blasio

Die dänische Company Caveman Audio um Steen Skrydstrup hat es sich zur Aufgabe gemacht, die weltweite Bassistengemeinde mit Boutique-Equipment zu versorgen, welches selbst höchsten Ansprüchen Genüge tut. Die Zeichen stehen gut, kann Mastermind Skrydstrup doch auf eine mehr als 25 Jahre umfassende Erfahrung im Bereich der Herstellung von Custom-Equipment für bekannte Musiker wie Steve Morse, Rammstein, Steve Stevens, The Edge oder The Scorpions zurückblicken. (Alle Bilder zur Verfügung gestellt von Caveman Audio)

BP1 crams the preamp and output stage from our BAS1 Bass Preamp System into a compact stompbox format with zero sonic compromises.
The BP1 adds definition in the Low mid-section to your bass sound. It will make your sound sit in the mix with the right definition and tons of dynamics.
With the built-in transformer balanced, studio-quality DI, you will no longer have to use low-quality DI’s at venues that make your bass sound dull, two-dimensional, and uninspiring.

Review by bonedo 

Review by Sound on Sound

BassTheWorld tests BP1

BP-1 Bass Preamp

Für 5-10 FX-Pedale, 1 MOD-Slot - **442 x 236 mm / 17.40" x 9.29"** - erhältlich mit Gig Bag oder Flight Case

For 5 - 10 FX pedals, 1 MOD slot - **442 x 236 mm / 17.40" x 9.29"** - available with Gig Bag or Flight Case

live and jad freer

Perry Matthew Lisboa

SOL ist die ultimative Lösung, um ein kleines bis mittelgroßes Pedalboard-Setup zum Leben zu erwecken, besonders wenn du stromhungrige Pedale verwenden. SOL ist das kleinste netzbetriebene Schaltnetzteil, das wir bei CIOKS herstellen (hier gibt es keine Wandwarzen). Das schnörkellose Design und die enorme Leistung lässt dir den Rücken frei, um dich auf deinen kreativen Funken zu konzentrieren.

SOL is the ultimate solution for bringing life to a small to medium-sized pedalboard setup, especially if you are using power-hungry pedals. SOL is the smallest mains-powered switch-mode power supply we make at CIOKS (no wall-warts here) and the no-frills design plus massive power will leave you free to focus on your creative spark.

CIOKS

Demo by Paul Bradshaw

Demo by EytschPi42

Review by Reddit /guitarpedals

Review by Bonedo

Peter Hoffmann

Der Sfx Sound micro-Thumpinator v1 ist ein dediziertes Hochpassfilter-Pedal, das für E-Bass entwickelt wurde. Seine Hauptfunktion ist das Entfernen von unerwünschten, unhörbaren Unterschallfrequenzen, die bei Verstärkern zu Clipping führen und den Sound, besonders bei hohen Lautstärken, undifferenziert machen können. Durch das Herausfiltern von Frequenzen unter einer bestimmten Schwelle strafft es den Low-End-Bereich, verbessert die Klarheit und optimiert die vom Verstärker gelieferte Energie. Das Pedal funktioniert mit Instrumenten- und Line-Pegel-Signalen und kann an jeder Stelle in der Signalkette platziert werden.

Bandwidth OptimiThe Sfx Sound micro-Thumpinator v1 is a dedicated high-pass filter pedal designed for bass guitar. Its primary function is to remove unwanted, inaudible subsonic frequencies that can cause amplifiers to clip and sound muddy, particularly at high volumes. By filtering out frequencies below a certain threshold, it tightens the low-end, improves clarity, and optimizes the energy delivered by the amplifier. The pedal works with both instrument and line-level signals and can be placed anywhere in the signal chain.zer: Cutting off fundamental frequencies below 30 Hz

Demo by  NoPlaceForTheDead

Product Page for Version 2

Talkbass Forum

micro-Thumpinator v1

QuickMount Type UV

Universal-Pedal-Montageplatte für vertikale Pedale

Universal Pedal Mounting Plate For Vertical Pedals

Michael Badger

Das DB 316 ist ein Midrange-EQ-Pedal, das auf dem Vorverstärker unserer gefeierten Tone Hammer-Serie basiert und Ihren Midrange-Sound perfektioniert. Das DB 316 ist ideal für Bässe mit Zweiband-Vorverstärkern und passive Instrumente, bei denen es darauf ankommt, den Midrange-Bereich zu treffen. Es ist flexibel und intuitiv. Es kann ein ständig eingeschalteter EQ für jede Situation sein oder ein praktisches Werkzeug zum schnellen Umschalten auf eine zweite EQ-Einstellung, wenn Sie den Spielstil ändern möchten. Mit seinem Mikrogehäuse ist das DB 316 die perfekte Ergänzung für Pedalboards jeder Größe.

The DB 316 is a Midrange EQ pedal based on the preamp of our acclaimed Tone Hammer Series to perfect your midrange tone. Ideal for basses with two-band preamps and passive instruments where nailing the midrange is key, the DB 316 is flexible and intuitive. It can be an always-on EQ for every situation or a convenient tool for quickly switching to a second EQ setting when you want to switch up playing styles. With its micro sized housing the DB 316 is the perfect addition to any size pedalboard.

Aguilar

Review by BASSCHAT

DB 316 Mid-EQ

The BoostBot is an always-on, ultra-compact clean boost with dynamic, real-time level display meter. The boost circuit is a classic op amp design, a clean and loud amplifier that sounds great and provides 20dB of boost. Displaying the signal level is a classic 10 Segment Bar Graph LED. Like all Dr. Scientist pedals the BoostBot can be used with guitar, bass, synths, and many other instruments.

Dr. Scientist

Demo by Feedback Pedals

Demo by Sound Isles

Review by The Gear Page

Review by reddit /guitarpedals

BoostBot

ISA rig

With the TU-3W, BOSS brings Waza Craft mojo to the world’s leading stompbox tuner. At its core, the TU-3W provides rock-solid tuning equivalent to the industry-standard TU-3. In true Waza tradition, the pedal’s benchmark functionality is further enhanced with BOSS skill and craftsmanship. Pure, uncolored signal transfer is essential for a tuner, and the TU-3W features redesigned circuitry with selectable buffered or true-bypass operation and the most transparent audio pass-through possible. Packing high-end performance for discriminating players, the TU-3W delivers a premium pedal experience only available from BOSS.

TU-3W Tuner

PedalSafe Type E1

QuickMount Type E

Pedal-Montageplatte für Standard-Boss-Pedale

Pedal Mounting Plate For Standard Boss Pedals

Schutzabdeckung & RockBoard-Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & RockBoard Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Schutzabdeckung & universelle Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & Universal Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Für 3-5 FX-Pedale - **318 x 142 mm / 12.52" x 5.59"** - erhältlich mit Gig Bag

For 3 - 5 FX pedals - **318 x 142 mm / 12.52" x 5.59"** - including Gig Bag

Der AP1 verfügt über unseren Acoustic Preamp, DI und Tuner Out.
Darüber hinaus haben wir eine schaltbare Boost-Funktion (mit unserer bekannten Hi-Cut-Funktion) für das Solospiel oder wenn Sie eine Gitarre mit geringerer Ausgangsleistung haben.

Das Pedal ist für volle Kompatibilität mit weltweiten Spannungen von 100-240VAC ausgelegt.

Egal, ob Sie Piezo-Tonabnehmer, eingebaute oder externe Mikrofone verwenden, AP1 lässt Ihre Gitarre so klingen, wie sie klingen soll.

Darüber hinaus verfügen der Radio/Wireless-Eingang und alle Ausgänge über speziell angefertigte Audio-Transformatoren.

AP1 utilizes our Acoustic Preamp, DI and Tuner Out.
On top of that, we added a switchable Boost function (with our well-known Hi-Cut feature) for soloing, or if you have a guitar with a lower output.

The pedal is designed for full compatibility with worldwide voltages spanning 100-240VAC.

Whether you use piezo pickups, as well as built-in or external microphones, AP1 will make your guitar sound the way it was meant to.

In addition, the Radio/Wireless input and all outputs feature custom-made audio transformers.

AP-1 Acoustic Preamp

Das AP1 Compact von Caveman Audio ist ein kompakter Preamp und DI-Pedal für akustische Gitarren, der denselben Vorverstärker-Schaltkreis und Transformator wie das große AP1 nutzt. Es bietet einen Hi-Z-Eingang für Piezo-Tonabnehmer oder interne Mikrofone sowie einen transformatorbalancierten XLR-DI-Ausgang, zusätzlich einen Tuner-Ausgang und eine „Mute“-Funktion zum lautlosen Stimmen. Das Pedal ist für Niederspannung ausgelegt und akzeptiert 9–18 V DC. Das Gehäuse besteht aus verzinktem Stahl und ist für Tour und Bühne robust gebaut, mit Fokus auf sauberen, hochwertig klingenden Akustik-Sound ohne störende Geräusche oder Interferenzen. Durch den kompakten Formfaktor passt es gut auf Pedalboards, ohne die Klangqualität des großen Modells zu beeinträchtigen.

The AP1 Compact from Caveman Audio is a compact acoustic-guitar preamp and DI pedal that delivers the same preamp design and custom transformer as the full-size AP1. It offers a Hi-Z input suitable for piezo pickups or internal microphones and outputs a transformer-balanced XLR DI; it also includes a Tuner output and a mute function for silent tuning. The pedal is designed for low-voltage operation and accepts 9–18 V DC power. The enclosure is road-ready, built from zinc-plated steel, with the focus on clean, high-quality acoustic signal with minimal noise or interference. The compact footprint makes it suitable for pedalboards while preserving the tonal characteristics of the full-size preamp.