George Zafeiriou

85x50

Tester

The SUPER SYNTH turns your bass into a synthesizer—with seriously cool sounds and no tracking delay! It also doubles as a digital octaver, with both octave up and octave down layers. The parameters of the pedal’s presets can be modified using the Markbass Pedal Controller software. Simply install the software, connect the pedal to your computer using a USB cable, modify the presets as desired, and then load them back onto the pedal. Like all our pedals, this unit features true bypass.

Markbass

Product Page

Super Synth

Die MB Mini-Pedalserie von Markbass wird auf dem gleichen hohen Qualitätsniveau wie unsere Standard-Effektlinie hergestellt, verwendet aber ein ultrakompaktes, leichtes Gehäuse. Kleiner als andere Stompboxen, passen diese unglaublich klingenden Pedale selbst auf die vollsten Pedalboards, und der 9-12V-Strombedarf bedeutet, dass Sie sie mit jedem Standard-Netzteil verwenden können.
Verleihe deinem Pedalboard einen „Boost“ mit dem MB Mini Boost, der auch unseren variablen Preshape-Filter enthält (hebt die Tiefen und Höhen an und senkt die Mitten).

The MB Mini series of pedals from Markbass is made to the same high quality level as our standard effect line, but uses an ultra-compact, lightweight chassis. Smaller than other stompboxes, these incredible-sounding pedals will fit onto even the most crowded pedal boards, and the 9-12V power requirement means you can use them with any standard power supply.
Give your pedalboard a “boost” with the MB Mini Boost—which also features our Variable Preshape Filter (boosts lows and highs, and cuts mids).

Demo by Pepo Vidal

Official Product Video

Review by Talk Bass.com

MB MINI BOOST

Der MARKBASS COMPRESSORE ist ein hochmodernes Komprimierungstool mit einer ECC81 Roehre im Signalweg.
Diese bietet einen satten und warmen Klang voller Obertoene im komprimierten Signal. Deshalb muesste er eigentlich TUBE COMPRESSORE heißen.
Weiterhin verfuegt der MARKBASS COMPRESSORE ueber alle wichtigen Funktionen eines Kompressors, die man mit den Reglern GAIN, THRESHOLD, RATIO, ATTACK, RELEASE und VOLUME einstellen kann.
Auch ein TRUE BYPASS ist vorhanden! Das bedeutet, bei ausgeschaltetem Kompressor geht das Signal direkt von der Eingangsbuchse zur Ausgangsbuchse, ohne die Audioqualitaet zu beeintraechtigen.

The MARKBASS COMPRESSORE is a state-of-the-art compression tool with an ECC81 tube in the signal path.
This provides a rich and warm sound full of harmonics in the compressed signal. That's why it should really be called TUBE COMPRESSORE.
The MARKBASS COMPRESSORE also has all the important functions of a compressor, which can be adjusted using the GAIN, THRESHOLD, RATIO, ATTACK, RELEASE and VOLUME controls.
There is also a TRUE BYPASS! This means that when the compressor is switched off, the signal goes directly from the input socket to the output socket without affecting the audio quality.

Demo by tune4media

Review by OVNI LABS

Review by bonedo

Review by Compressor Pedal Reviews

Manual

Compressore

David Litaba

The Microtubes Infinity shares the footmark of our programmable line, packed with our three legendary Microtubes distortions: B3K, Vintage, and X. Moreover, it allows multiband compression on every mode, blending Impulse responses between distortions while adding extra controls via the Darkglass suite for an endless number of features: An infinity of possibilities.

Darkglass Electronics

Demo by  Pair of Pandas

Demo by Paajanenae

Review by TalkBass.com

Review by Rainer Wind, bonedo.de

Demo by Darkglass Electronics

Microtubes Infinity

Der EHX TriParallel Mixer ist ein leistungsstarker Hub für die Erstellung und Mischung von Effekten mit drei separaten Effektschleifen und flexiblen Bedienelementen für vielfältige Konfigurationen.

Der TriParallel Mixer ist angesichts seines Funktionsumfangs überraschend kompakt und dank seiner intuitiven Bedienelemente und Ein-/Ausgänge einfach zu bedienen.

Verwenden Sie ihn, um zwischen bis zu drei separaten Effektschleifen zu wechseln oder sie zu mischen. Senden Sie den Ausgang einer Gitarre oder eines anderen Instruments an drei separate Verstärker oder geben Sie drei separate Instrumente ein, um zwischen ihnen zu wechseln oder sie auf einen einzigen Ausgang zu mischen. Mischen Sie Effekte parallel, um Klänge zu erzeugen und Optionen zu nutzen, die bei der seriellen Verwendung von Effekten (nacheinander) nicht möglich sind.

The EHX TriParallel Mixer is a powerful effects creation and mixing hub with three separate FX loops and flexible controls allow for multiple configurations.

The Tri Parallel Mixer is surprisingly compact considering the level of functionality it provides, while its intuitive controls and I/O make it easy to operate.

Use it to switch between or mix up to three separate effects loops. Send a guitar or other instrument out to three separate amplifiers, or input three separate instruments to switch between or mix to a single output. Mix effects in parallel to create sounds and allow for options not possible when using effects in series (one after another).

Electro-Harmonix

Demo by Gaving Forbes Music

Review by Guitar Player

Review by Gear News

Tri Parallel Mixer

PedalSafe Type O

QuickMount Type O

Pedal-Montageplatte für FRIEDMAN Overdrive Deluxe & WALRUS Descent Pedale

Pedal Mounting Plates for FRIEDMAN Overdrive Deluxe & WALRUS Descent pedals

Schutzabdeckung & RockBoard-Montageplatte für FRIEDMAN Overdrive Deluxe & WALRUS Descent Pedale

Protective Cover & RockBoard Mounting Plate For FRIEDMAN Overdrive Deluxe & WALRUS Descent pedals

Schutzabdeckung & universelle Montageplatte für FRIEDMAN Overdrive Deluxe & WALRUS Descent Pedale

Protective Cover & Universal Mounting Plate For FRIEDMAN Overdrive Deluxe & WALRUS Descent pedals

Amazingly powerful and ultra-versatile, GT-1000CORE delivers the most complete guitar and bass processing experience available in a single stompbox. The full DSP muscle of the flagship GT-1000 lives inside this mini juggernaut, driving class-leading sound quality, advanced AIRD technology, 24 simultaneous effects blocks, and over 140 unique amp/effect types for unlimited creative expression. GT-1000CORE fits into any pedalboard setup and works equally well as a standalone processor for playing live and in the studio. And with flexible I/O and vast control support, it’s right at home as the core of any rig.

BOSS

Review by The Gear Page

Review by reddit /guitarpedals

Review by guitar pedal X

Demo by  Bernd Kiltz - Gitarrenvideos

GT-1000 CORE

Passive to active and back again with no hassle.
The Radial Tonebone Bassbone is a smart EQ/DI pedal that manages your bass signal with 2 separate channels and a powerful EQ that overrides the preamp's tone settings. The Tonebone allows switching between a traditional passive bass and a modern active bass during a gig without lengthy and awkward adjustments to the preamp, EQ, amp, and instrument level. This EQ and DI Box can also be used with a single bass to provide 2 separate signals finessed by its incredible enhancement capabilities. The integrated boost, variable gain, and effects loop can be used individually or together. A balanced XLR out sends the complete signal direct to the board for PA-only gigs and studio time. Added heft and punch to your tone is like a secret weapon. The Radial Tonebone Bassbone is powered by a 15VDC power supply.

Radial Engineering

Review by bonedo.de

Demo by Premier Guitar 

Demo by Pertybass

Tonebone Bassbone  V1

Designed to be the perfect complement to our distortion circuits, the flexibility and portability of the Harmonic Booster is also the perfect one-stop solution for gigging musicians in search of a precise and harmonically rich clean preamplifier.

Demo by Stuart Clayton

Review by Naris Sebastian Stolz, amazona.de

Demo by BassTheWorld

Harmonic Booster

David Graves

The Cali76 Bass Compressor is a studio-grade compressor pedal inspired by the world-famous Urei® 1176® studio compressor, heard on many of the greatest studio recordings since the 1960s. The Cali76 Bass Compressor uses uncompromising all-analogue circuitry to make these distinctive, ultra-fast FET compression tones available to the modern guitarist.

The latest in a long lineage of Cali76 compressors, the Cali76 Bass Compressor features a full set of studio-style controls, a DRY knob for parallel compression and an improved sidechain that matches the response of our sought-after “large format” Cali76 – the pedal that put Origin Effects on the map back in 2012.

With a 10-LED gain reduction meter, a pedalboard friendly enclosure and massive headroom thanks to internally increased voltage, the Cali76 Bass Compressor marks the culmination of over a decade of experience making the world’s finest compressor pedals.

Origin Effects

Demo by  BassTheWorld.com

Review by reddit /basspedals

Review by Gearnews

Review by AMAZONA

Manual download

Cali76 Bass Compressor (Classic)

With the 200 series, BOSS introduces a new generation of pedals that pack advanced sound and versatility into a streamlined size that saves space on your board. Grab-and-go controls and multi-function switches make operation easy and intuitive, while onboard memories allow you to store multiple setups for instant recall. All 200 series pedals feature premium audio quality with 32-bit internal processing and offer support for external control via footswitches, an expression pedal, or MIDI.

The OD-200 Hybrid Drive brings next-level sound, feel, and flexibility to overdrive and distortion, combining decades of BOSS tone expertise with innovative technologies. Powered by hybrid analog/digital circuitry, this dream pedal delivers any drive tone you can imagine via 12 primary modes, 15 boost types, series/parallel gain paths, and more. There’s even an advanced gate on board, ideal for both eliminating noise and adding tightness to high-gain drive tones.

Demo by Rabea Massaad

Demo by EytschPi42

OD-200 Hybrid Drive

Offering a universe of rich, analog-inspired polyphonic tones in a small footprint, the SY-200 makes it simple to weave BOSS’s expressive guitar and bass synth technology into all of your musical journeys. Building on the fun, instant-gratification experience of the acclaimed SY-1, this blue inspiration machine features an expanded sound set, more tone-shaping possibilities, and 128 memories for storing your sonic creations. Two onboard footswitches provide deep real-time performance control, and you can take things even further with external footswitches, an expression pedal, and MIDI.

Demo by  Six-String Samurai

Review by Sound on Sound

Review by musicradar

SY-200 Synthesizer

Featuring an advanced multi-core processor with a huge library of on-board guitar FX, amp, cab and microphone emulations, smart amp/pedal cloning and IR loading, best-in-class looper, and a full suite of vocal FX (including the industry-standard Antares Auto-Tune), the HeadRush® Prime is the most powerful, versatile, and realistic-sounding floorboard FX processor ever. The high resolution and ultra-responsive 7-inch display enables you to touch, swipe, and drag-and-drop to instantly create and edit your rigs in an unprecedentedly easy-to-use way.

HeadRush

Demo by Chilled Guitar Reviews 

Review by Premier Guitar

Review by delamar

Headrush prime

The MXR Bass Envelope Filter delivers classic analog envelope filter sounds in an easy-to-use and compact pedal designed specifically for bass. Separate Dry and Effect controls let you dial in the perfect mix of effected and direct signals, so you can bring the funk without losing the low end. Its wide range of filter tones can be shaped with the Decay and Q controls, and a simple twist of the Sensitivity knob can tailor the pedal for your attack—as well as adjust for passive or active basses. The Bass Envelope Filter's power supply circuitry is designed to withstand over-voltage or polarity mishaps, and its true-bypass switching preserves your tone in bypass mode. It's all packaged in a durable, lightweight, Phase 90-size aluminum housing for the ultimate in portability and pedalboard space-saving dimensions.

Demo by The Bass Chanel

Demo by Bass Whisperer TV

M82 Bass Envelope Filter

rBass

RB_new Full Analog

Der MXR Bass Chorus Deluxe basiert auf reiner analoger Bucket-Brigade-Technologie, die schimmernde, flüssige Chorus- und rauschende, metallische Flanger-Effekte liefert und dabei den Punch und das Fundament deines Low Ends bewahrt.

Der Bass Chorus Deluxe verfügt über Flanger- und X-Over-Tasten auf der Oberseite mit LED-Statusanzeigen. Im X-Over-Modus wird die Modulation in den tiefen Frequenzen auf 100 Hz abgesenkt - perfekt für das Spielen von Akkorden, Melodien und Fills in den oberen Registern, während die tiefen Frequenzen in der richtigen Stimmung bleiben. Mit den Reglern für Bass und Treble können Sie die Tiefen und Höhen absenken oder anheben und den Klangcharakter des Effekts gestalten. Für einen breiten Stereosound können Sie über einen internen Schalter den TRS (Tip-Ring-Sleeve) Stereo Hardwire Bypass Mode wählen. In diesem Modus können Sie ein TRS-auf-TS-(Tip-Sleeve)-Y-Verteilerkabel verwenden, um das Effektsignal an zwei verschiedene Verstärker zu senden, so dass die Modulation von links nach rechts wandern kann.

The MXR Bass Chorus Deluxe is powered by pure analog bucket-brigade technology, serving up shimmering, liquid chorus and swooshing, metallic flanger effects while preserving the punch and fundamental of your low end.

The Bass Chorus Deluxe features top-mounted Flanger and X-Over buttons with LED status indicators. In X-Over Mode, modulation in low frequencies is decreased at 100Hz—perfect for playing upper register chords, melodies and fills while keeping the low end in tune. With Bass and Treble controls you can cut or boost lows and highs and shape the tonal character of the effect. For a wide stereo sound, select the TRS (tip-ring-sleeve) Stereo Hardwire Bypass Mode via an internal switch. In this mode, you can use a TRS to TS (tip-sleeve) Y-splitter cable to send the effect signal to two different amplifiers, allowing the modulation to move from left to right.

Review by Basschat

Review by Bonedo

Demo by The Bass Channel

M83 Bass Chorus Deluxe

QuickMount Type A

Pedal-Montageplatte für Standard-Einzelpedale

Pedal Mounting Plate For Standard Single Pedals

M288 Bass Octave Deluxe

FLASHBACK is a modern twist on the know-how and legacy of TC Electronic's legendary 2290 Delay, featuring 7 seconds of delay and a cherry-picked selection of the very best delay sounds out there . Seriously, why you're not out buying one right now after reading that is beyond us.

TC Electronic

Demo by Ryan Lutton

Demo by Reverb

Demo by TC Electronics

FLASHBACK DELAY

PedalSafe Type G

QuickMount Type G 

Pedal-Montageplatte für Standard TC Electronic Pedale

Pedal Mounting Plate For Standard TC Electronic Pedals

Schutzabdeckung & RockBoard Montageplatte für Standard TC Electronic Pedale

Protective Cover & RockBoard Mounting Plate For Standard TC Electronic Pedals

Schutzabdeckung & universelle Montageplatte für Standard TC Electronic Pedale

Protective Cover & Universal Mounting Plate For Standard TC Electronic Pedals

When it was introduced in 2010, the original POLYTUNE forever revolutionized the way musicians tune their instruments. Praised by professional and amateur players, guitar tuning instantly became as simple as Strum - Tune - Rock! So how do you make the best-selling polyphonic tuner even better? You take it to the next level by: providing multiple tuning modes, including polyphonic, chromatic, strobe and a variety of altered tunings; adding an onboard BONAFIDE BUFFER to preserve your tone over long cable runs and pedal board signal paths; and upgrading the LED display for even higher tuning accuracy. Say hello to your next tuner – POLYTUNE 3.

Review by Charleston Classical Guitar

Demo by American Musical Supply

Demo by Addicted to Gear

Demo by realbeal

Polytune 3

Giuseppe CAVO

The Bassbone V2 is a bass command center that enables one to seamlessly switch between
any two bass guitars including active, passive (magnetic) and upright (piezo). When the PZB
booster is engaged, the PZB activates a special boost circuit for piezo transducers that at
once increases the sensitivity and impedance to 10 meg-Ohms, this results in a much wider
frequency response. Two channels let you set up each instrument with their own tone and
signal level. Channel-1 features two preset tones that will bring a modern vibe to older
vintage amps. Channel-2 features a powerful passive-interactive EQ that lets you carve out
any tone. When Input-2 is not in use the Bassbone reverts to a 2-channel preamp that lets
you create two completely different tones with one bass. A built-in effects loop lets you to
share pedals with both basses and this is supplemented with a variable power booster for
solos and a mute switch for quiet-on-stage tuning. A built-in Radial DI box delivers the
performance to the PA or recording system.

Review by Bass Gear Mag

Demo by Sweetwater

Demo by Deadbeat Studios

Bassbone v2

Für 5-9 FX-Pedale - **622 x 142 mm / 24.49" x 5.59"** - erhältlich mit Gig Bag oder Flight Case

For 5 - 9 FX pedals - **622 x 142 mm / 24.49" x 5.59"** - available with Gig Bag or Flight Case

nicolas  mouren

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 3 V2 ist eine Patchbay für Sänger und Akustik-Musiker. Über die zwei XLR-Ausgänge kannst du ein Stereo-Signal von dein MOD senden und an den XLR-Eingang lässt sich ein Mikrofon anschließen. Mit drei TRS-Through-Verbindungen lässt sich das MOD 3 V2 außerdem als zentraler Zugang und Ausgang des Boards nutzen um zum Beispiel Effektpedale in den FX-Loop eines Verstärkers einzuschleifen.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 3 x 6,3 mm TRS thru
- 2 x XLR thru (männlich vorne / weiblich hinten)
- 1 x XLR thru (weiblich vorne / männlich hinten)
- 1 x DC 2,1 x 5,5 mm Hohlstecker thru
- 1 x AC IEC thru (männlich vorne / weiblich hinten)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel


The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 3 V2 is a pass-thru box designed for use by vocalists and acoustic players. The 2x XLR outputs allow you to send a stereo signal from your MOD and the 1x XLR input can be used to connect your microphone. You can also use it to run several pedals from your board through the effects loop of your amp, or simply use the MOD as a central access point to your pedalboard.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 3 x 6,3 mm / ¼" TRS thru
- 2 x XLR thru (male front / female back)
- 1 x XLR thru (female front / male back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR Patchbay for Vocalists & Acoustic Players

Sandbox Pedal Board-copy

Dieses High-Fidelity-Stereo-Reverb-Pedal bietet sechs verschiedene Programme in Studioqualität: Spring, Hall, Plate, BFR, Refract und Air. Es basiert auf einer leistungsstarken digitalen Plattform mit einem Analog Devices SHARC-Prozessor, 32-Bit-Fließkomma-Verarbeitung und 24-Bit/48-kHz-Wandlern. Das Gerät verfügt über einen einzigartigen Volume-Swell-Effekt, der auf jedes Programm angewendet werden kann, sowie über Sustain- und Latching-Momentary-Funktionen zur Erzeugung atmosphärischer Klänge. Es bietet eine umfassende Steuerung über MIDI, unterstützt bis zu 128 Presets und verfügt über drei wählbare Bypass-Modi, einschließlich True Bypass und DSP-Trails. Das Plate-Programm ist speziell vom klassischen analogen Plattenhall EMT 140 inspiriert und sorgt für eine sanfte und gleichmäßige Diffusion.

This high-fidelity stereo reverb pedal features six distinct studio-quality programs: Spring, Hall, Plate, BFR, Refract, and Air. It is built on a powerful digital platform using an Analog Devices SHARC processor with 32-bit floating-point processing and 24-bit 48kHz converters. The unit includes a unique volume swell effect applicable to any program, along with sustain and latching momentary functions for creating ambient washes. It offers extensive control via MIDI, supporting up to 128 presets, and features three selectable bypass modes including true bypass and DSP trails. The Plate program is specifically inspired by the classic EMT 140 analog plate reverb for smooth and even diffusion.

Walrus Audio

Review by Guitar.com

Demo by Guitar Bonedo

MAKO R1 Stereo Reverb

M292 Carbon Copy Deluxe

The MXR M306 Poly Blue Octave Pedal is a colossal box of tone. There's a staggering array of effects to explore in a single pedal that'll keep you experimenting all night. With no less than four separate octave divisions available you can send your tone plummeting down the registers for some unctuous bass or soar up through the pitches to reach dizzying high notes. Combine all those octaves together or separately and mix in the fuzz, mono, dry/wet and expression pedal options and you have an almost unlimited palette of sonic creation. Whatever sound is in your head, you can bring it to life it on the MXR Poly Blue.

It simply can't be overstated just how versatile and varied this delightful stomp box is. Offering dual-mode modulation, your effects are boosted with phaser like momentum, be that a thick, undulating slow swirls or a frenzied, frantic dash. Set into the polyphonic mode you have access to textures resembling the famous rotary Leslie effect, while the monophonic switch evokes the swooshes and dips of MXR's celebrated Phase 90 pedal. And for those times you don't want to draw on the considerable power of the M306, it's default off bypass mode will ensure your signal is unaffected no matter where you place this on your pedalboard.

Poly Blue Octave M306 Product Page 

Poly Blue Octave M306 Manual

Demo by abienttrash

M306 POLY BLUE OCTAVE

Der SansAmp Bass Driver DI ist viel mehr als nur eine Direktbox. Er kann große Vintage-Röhrensounds, helle moderne Slap-Sounds, knorrige Verzerrungen und alles dazwischen erzeugen. Drei verschiedene Ausgänge zum Ansteuern von Endstufen, Aufnahmepulten, PA-Mischpulten oder einfach zum Verbessern Ihres aktuellen Rigs. Zu den Reglern gehören Presence für die Definition und den oberen Obertongehalt, Blend, um das Verhältnis von Direktsignal und SansAmp-Schaltung zu kombinieren, und ein aktiver EQ, der mit 12 dB Absenkung oder Anhebung speziell auf den Bass abgestimmt ist.

Da die Popularität von 5- und 6-saitigen Bässen den Status einer Modeerscheinung überschritten hat und zum Mainstream geworden ist, haben wir einen Schalter hinzugefügt, mit dem die Bassfrequenz so eingestellt werden kann, dass sie auch in die tieferen Lagen reicht. Außerdem haben wir einen Regler für die Mitten und einen Schalter zur Einstellung ihrer Frequenz hinzugefügt. Der Kern des SansAmp Bass Driver und alle seine Töne bleiben dem ursprünglichen Design treu.

Much more than just a direct box, the SansAmp Bass Driver DI is capable of dialing up big vintage tube tones, bright modern slap sounds, gnarly distortions, and all in between. Three different outputs to drive power amps, recording desks, PA mixers, or simply enhance your current rig. Controls include Presence for definition and upper harmonic content; Blend to combine the proportion of direct signal and SansAmp circuitry; and active EQ specifically tuned for bass with 12dB of cut or boost.

With the popularity of 5- and 6-string basses going beyond fad status and becoming mainstream, we added a switch to adjust the bass frequency to extend into those lower registers. We also added a mid-range control and a switch to adjust its frequency. The core of the SansAmp Bass Driver and all of its tones remain true to its original design.

Tech 21

Review by bondeo

Demo by Philip Brennan

SansAmp BDDI V2

PedalSafe Type D2

QuickMount Type D

Pedal-Montageplatte für große horizontale Pedale

Pedal Mounting Plate For Large Horizontal Pedals

Schutzabdeckung & RockBoard-Montageplatte für große horizontale Pedale

Protective Cover & RockBoard Mounting Plate for Large Horizontal Pedals

Schutzabdeckung & universelle Montageplatte für große horizontale Pedale

Protective Cover & Universal Mounting Plate For Large Horizontal Pedals

Jonathan James

Als wir im Oktober 1998 den TU-2 vorstellten, wurden wir vom Erfolg überrollt: Ein unverwüstlicher Tuner im beliebten BOSS Bodentreter-Format - das schlug ein wie eine Bombe. Dieses Stimmgerät war schnell auf den Bühnen der ganzen Welt zu finden. Amateure, Profis und Gitarrenhelden haben ihn in ihrem Setup, der TU-2 war jeden Monat das meistverkaufte BOSS Pedal weltweit!

Viele Hersteller haben seitdem einen ähnlichen Tuner gebaut - doch BOSS setzt mit dem TU-3 die Messlatte wieder ein ganzes Stück höher. Mit großartigen neuen Funktionen und gleichbleibender, unverwüstlicher Qualität!

The world’s top-selling stage tuner, the BOSS TU-2, evolves and improves with the debut of the new TU-3. Housed in a tank-tough BOSS stompbox body, the TU-3 features a smooth 21-segment LED meter with a High-Brightness mode that cuts through the harshest outdoor glare. Choose between Chromatic or Guitar/Bass tuning modes, and enjoy visual pinpoint tuning verification with the Accu-Pitch Sign function. The TU-3 incorporates a convenient Note Name Indicator that can display notes of 7-string guitars and 6-string basses, while the Flat-Tuning mode can support up to six half-steps. It’s the new-standard tuner that no guitarist or bass player should be without!

Demo by Gear4music 

Demo by Equipboard

Demo by BOSS 

Review by reddit /Guitar

Review by Musiker-Board

Review by The Gear Check

Manual's All 

TU-3 Chromatic Tuner

PedalSafe Type E1

QuickMount Type E

Pedal-Montageplatte für Standard-Boss-Pedale

Pedal Mounting Plate For Standard Boss Pedals

Schutzabdeckung & RockBoard-Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & RockBoard Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Schutzabdeckung & universelle Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & Universal Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Für 5-10 FX-Pedale, 1 MOD-Slot - **442 x 236 mm / 17.40" x 9.29"** - erhältlich mit Gig Bag oder Flight Case

For 5 - 10 FX pedals, 1 MOD slot - **442 x 236 mm / 17.40" x 9.29"** - available with Gig Bag or Flight Case

Ryan James

This board is built for Shiloh Church based in Bahrain, I wanted something simple yet powerful enough to bring it to the studio for tracking. Choosing the DSM Humboldt Bass Master really helps with routing option, further adding the MOD 1 Patchbay lets me send in 3 signals, clean, dirty and overall effected that will be super helpful in a studio situation.

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 1 V2 ist eine Pass-Through-Box, die speziell für Gitarristen und Bassisten entwickelt wurde. Du kannst das MOD 1 V2 nutzen um mehrere Pedale deines Setups im Front End und im Effekt-Loop des Verstärkers zu postieren (4-Kabel Methode) oder die vier TRS-Anschlüsse als zentralen Zugang und Ausgang des Boards nutzen. Die XLR-Through-Verbindung kann als Signalausgang vom Pedalboard zum Mischpult oder zur PA verwendet werden.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 5 x 6,3 mm TRS thru
- 1 x XLR thru (männlich vorne / weiblich hinten)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 5 x 6,3 mm / ¼" TRS thru
- 1 x XLR thru (male front / female back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR, IEC & Barrel Patchbay

Bass Pedalboard for Shiloh Church

Louis Sommer

The RNDI-M brings the stunning tone & clarity of its award-winning counterparts to an even more compact and pedalboard-friendly format, with the exact same custom Rupert Neve Designs transformers and discrete FET input stage as the best-selling RNDI, RNDI-S and RNDI-8. 

By streamlining its feature set and housing the electronics in a rugged & more compact chassis, the RNDI-M fits neatly into any space and will allow even more musicians and engineers to tap into the uncompromised sonic power & vibrancy of a Rupert Neve Designs DI.

Rupert Neve Designs

RNDI-M

Jeffrey Wang

High-quality, high current buffer/signal splitter for use in multiple scenarios.  It is powered by normal (Boss-style) pedalboard-friendly 9Vdc from any supply (no special adapters needed).  The jacks are oriented specifically to integrate with your other pedals (fits easily on your board).  Uses a genuine Jensen Transformer for the cleanest, clearest signal and the greatest noise rejection.

Output 2 can be used as an active DI for recording and allows for balanced connection via TRS or using a TRS to XLR adapter (available separately)

Pinstripe Pedals

Demo by Kenyon Reed

Demo by Sam Wittek

MBFR

James Morse

The greatest pieces of studio gear are the ones that add something special to the sound of an instrument, going beyond the job they were designed for and enhancing anything that passes through the circuit. One such piece is the UA 610 preamp, which was the inspiration for the DCX Boost. This retro console preamp is famous for adding vintage, analogue colour to a signal, as well as precise control of level and EQ. Push the level harder and you get rich, harmonic saturation of the kind that makes analogue hardware a must-have in any present-day studio.

The DCX Boost reimagines this classic preamp as a tone-shaper and drive pedal for guitar, with a wide range of clean and overdrive tones, EQ frequencies optimised for the instrument, and our Adaptive Circuitry providing a treble response that reacts to playing dynamics. It’s a signal-boosting, tone-enhancing pedal straight from the studio!

DCX BOOST

Cali76 Bass Compressor (Classic) by Origin Effects