Alex Pini

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 1 V2 ist eine Pass-Through-Box, die speziell für Gitarristen und Bassisten entwickelt wurde. Du kannst das MOD 1 V2 nutzen um mehrere Pedale deines Setups im Front End und im Effekt-Loop des Verstärkers zu postieren (4-Kabel Methode) oder die vier TRS-Anschlüsse als zentralen Zugang und Ausgang des Boards nutzen. Die XLR-Through-Verbindung kann als Signalausgang vom Pedalboard zum Mischpult oder zur PA verwendet werden.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 5 x 6,3 mm TRS thru
- 1 x XLR thru (männlich vorne / weiblich hinten)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 5 x 6,3 mm / ¼" TRS thru
- 1 x XLR thru (male front / female back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR, IEC & Barrel Patchbay

My PedalBoard

David Graves

Ausgestattet mit einer bassspezifischen Tuner-Schaltung für präzises Stimmen, selbst bei tiefen Frequenzen  
ULTRA BUFFER-Technologie, optimiert für Bass und umschaltbar auf True Bypass  
Einzigartiges Design mit großem Display in kompakter Größe  
Hohe Sichtbarkeit dank einstellbarer Helligkeit der Meter-LEDs  
Ultrapräzises Stimmen bis auf ±0,1 Cent genau  
Vier verschiedene Anzeigemodi

Equipped with a bass-specific tuner circuit for precise tuning, even at low frequencies
ULTRA BUFFER technology optimized for bass and switchable to true bypass
Unique design with a large display in a compact size
High visibility with meter LEDs which brightness can be adjusted
Ultra-precise tuning down to ±0.1 cents
Four meter display modes

KORG

Product Page

Review by recording.de

Review by bonedo

Manual

Demo by Musiker TV

Pitchblack XS Bass

Tester

Der NS-2 eignet sich hervorragend, um Signal-Rauschen und lästige Brummgeräusche zu eliminieren, wobei der Klangcharakter des originalen Eingangssignals unberührt bleibt. Attack und Hüllkurve des Signals werden in keinster Weise beeinträchtigt, dank eines von BOSS entwickelten, einzigartigen Noise Detection-Schaltkreises, der den Gitarrenklang präzise von sämtlichen Störgeräuschen zu separieren vermag.

The NS-2 Noise Suppressor eliminates unwanted noise and hum without altering an instrument's natural tone. It's the perfect pedal to quiet down any pedalboard or effects setup.

BOSS

Demo by  Charly G.- Sound & Demo

Demo by Riffs, Beards & Gear

Review by Musiker-Board

Review by The Gear Page

Review by reddit /guitarpedals

Review by Pedal Authority

NS-2 Noise Suppressor

PedalSafe Type E1

QuickMount Type E

Pedal-Montageplatte für Standard-Boss-Pedale

Pedal Mounting Plate For Standard Boss Pedals

Schutzabdeckung & RockBoard-Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & RockBoard Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Schutzabdeckung & universelle Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & Universal Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

David Litaba

The Microtubes B1K is a phenomenal tribute to one of our most legendary distortion circuits in a compact and intuitive format. We are proud to introduce our Microtubes B1K distortion pedal, the first of its kind from an all-new lineup.

Darkglass Electronics

Demo by Bass Bonedo

Demo by The Bass Channel

Review by Rainer Wind, bonedo.de

Review by Kevin Johnson, notreble.com

Review by stephan, gearnews.de

Demo by patrick hunter 

Microtubes B1K

The Microtubes Vintage is our tribute to some of the most legendary sounds in rock history. It provides warm tube-like tones with a natural dynamic response that echoes the organic compression of old tube amps and reel-to-reel tape machines.

Demo by  Prymaxe

Demo by  Musicmaker

Review by Steve Cook, premierguitar.com

Demo by amosheller 

Demo by the bass channel 

Vintage Microtubes

Der Keeley Bassist Compressor liefert echte Hi-Fi Kompression und Limiting. Er ist um den exotischen und extremen Hi-Fi THAT Corp. 4320 gebaut. Sieh ihn als sehr leistbaren Kompressor mit Studioqualität im Bodentreterformat! Er nutzt Hochleistungs-Spannungsgesteuerte-Verstärker (VCAs), echte on-board RMS-Detektoren, Ultrahochleistungs-OP-Amps um die beste Soundqualität zu gewährleisten. VCA Compressoren bieten prezise Kontrolle. Deswegen eignen sie sich speziell für E-Bässe. 
Der Keeley Bassist Compressor ist musikalisch und transparent. Wo ältere Kompressoren auf den CA3080 oder LM13700 aufgebaut waren und perfekt für Single Coil Gitarren waren, hat der neue Keeley Bassist Compressor keine Probleme mit aktiven Pre-Amps und Line-Level Ausgangssignalen!
Nicht nur kann er erstaunlich starke Signale verarbeiten, er hat eine unglaubliche Bandbreite von über 20 KHz und ist extrem rauscharm. 
Kein Detail im Bass-Sound geht verloren. Der Keeley Bassist ist eine Investition mit Rack-Qualität in den Sound für das Pedalboard.

The Keeley Bassist Compressor provides true high-fidelity compression and limiting. Be heard and felt using performance compression by Keeley Engineering.

The Bassist Compressor is built around the exotic and extremely high fidelity THAT Corp. 4320.  Think of it as very affordable studio-grade compressor in stomp box format!  It uses high performance Voltage Controlled Amplifiers, on board true-RMS detector, and ultra high performance op-amps to bring you the very best quality. VCA compressors give you precise control.  Therefore they are directly suited to bass guitars. The Keeley Bassist Compressor is both musical and very transparent.  Where our older compressors were based on the CA3080 or the LM13700 and are perfect for single coil guitars, the new Keeley Bassist Compressor has no problems with active pre-amps and line level input signals!  Not only can the Keeley Bassist handle astonishingly large signals, it has an incredible bandwidth of over 20 KHz and incredibly low noise.  No detail in your bass guitar’s tone will be lost.  The Keeley Bassist will be a sound investment in your tone, you now have rack-mount quality at your feet.

Keeley Electronics

Official Product Page

Keeley Bassist Limiting Amplifier - Demo Video - Mike Hermans

Keeley Bassist Limiting Amplifier - Review by Bass Professional [DE], [01-2019]

Keeley Bassist Limiting Amplifier - Review by Muzikus [CZ]

Keeley Bassist Limiting Amplifier - Review by Gitarre & Bass [DE]

Keeley Bassist Limiting Amplifier - Review by Bonedo [DE]

Bassist Compressor

PedalSafe Type A1.1

QuickMount Type A

Pedal-Montageplatte für Standard-Einzelpedale

Pedal Mounting Plate For Standard Single Pedals

Schutzabdeckung & RockBoard-Montageplatte für MXR® Standardgröße und Dunlop® Echoplex Delay Pedale

Protective Cover & RockBoard Mounting Plate For MXR® standard size and Dunlop® Echoplex Delay pedals

Schutzabdeckung & universelle Montageplatte für MXR® Standardgröße und Dunlop® Echoplex Delay Pedale

Protective Cover & Universal Mounting Plate For MXR® standard size and Dunlop® Echoplex Delay pedals

Der MXR Bass Chorus Deluxe basiert auf reiner analoger Bucket-Brigade-Technologie, die schimmernde, flüssige Chorus- und rauschende, metallische Flanger-Effekte liefert und dabei den Punch und das Fundament deines Low Ends bewahrt.

Der Bass Chorus Deluxe verfügt über Flanger- und X-Over-Tasten auf der Oberseite mit LED-Statusanzeigen. Im X-Over-Modus wird die Modulation in den tiefen Frequenzen auf 100 Hz abgesenkt - perfekt für das Spielen von Akkorden, Melodien und Fills in den oberen Registern, während die tiefen Frequenzen in der richtigen Stimmung bleiben. Mit den Reglern für Bass und Treble können Sie die Tiefen und Höhen absenken oder anheben und den Klangcharakter des Effekts gestalten. Für einen breiten Stereosound können Sie über einen internen Schalter den TRS (Tip-Ring-Sleeve) Stereo Hardwire Bypass Mode wählen. In diesem Modus können Sie ein TRS-auf-TS-(Tip-Sleeve)-Y-Verteilerkabel verwenden, um das Effektsignal an zwei verschiedene Verstärker zu senden, so dass die Modulation von links nach rechts wandern kann.

The MXR Bass Chorus Deluxe is powered by pure analog bucket-brigade technology, serving up shimmering, liquid chorus and swooshing, metallic flanger effects while preserving the punch and fundamental of your low end.

The Bass Chorus Deluxe features top-mounted Flanger and X-Over buttons with LED status indicators. In X-Over Mode, modulation in low frequencies is decreased at 100Hz—perfect for playing upper register chords, melodies and fills while keeping the low end in tune. With Bass and Treble controls you can cut or boost lows and highs and shape the tonal character of the effect. For a wide stereo sound, select the TRS (tip-ring-sleeve) Stereo Hardwire Bypass Mode via an internal switch. In this mode, you can use a TRS to TS (tip-sleeve) Y-splitter cable to send the effect signal to two different amplifiers, allowing the modulation to move from left to right.

Review by Premier Guitar

Review by Basschat

Review by Talk Bass.com

Review by Bonedo

Official Product Video

M83 Bass Chorus Deluxe

Tom Page

Der GEC5-Link ist ein Looper/Switcher mit integrierter Link-Funktion zur Erweiterung und Verbindung mehrerer Einheiten. Er bietet fünf sequentielle Loops mit Relais True Bypass Schaltung. Er speichert bis zu 200 Presets auf fünf Spuren und zehn Bänken bei klarer Benutzeroberfläche. Er besitzt ein eingebautes Input-Buffer und unterstützt Master-Bypass per Doppeltipp. Die Link-Ports ermöglichen das Teilen von Einstellungen oder das Ketten von Loops über mehrere Geräte. Die Abmessungen betragen 330 × 50 × 51 mm und machen ihn schlank und pedalbretttauglich.

The GEC5-Link is a loop switcher with native Link capability to cascade and expand control across units. It offers 5 sequential loops with relay true bypass switching. It stores up to 200 presets across 5 lanes and 10 banks with a clear interface. It includes an onboard input buffer and supports master bypass via double-press. Its Link ports allow multiple units to share settings or chain loops. The dimensions are 330 × 50 × 51 mm, making it slim and pedalboard-friendly.

Moen

Official Product Video 2

Official Product Video 1

Gec5-link

Teeratai Kaewmanee

The greatest pieces of studio gear studio gear are the ones that add something special to the sound of an instrument, going beyond the job they were designed for and enhancing anything that passes through the circuit. One such piece is the UA 610 preamp, which was the inspiration for the DCX Bass. This retro console preamp is famous for adding vintage, analogue colour to a signal, as well as precise control of level and EQ. Push the level harder and you get rich, harmonic saturation of the kind that makes analogue hardware a must-have in any present-day studio.

The DCX Bass reimagines this classic preamp as a tone-shaper and drive pedal for bass guitar, with a wide range of clean and overdrive tones, EQ frequencies optimised for the instrument, and our Adaptive Circuitry providing a treble response that reacts to playing dynamics. It’s a signal-boosting, tone-enhancing pedal straight from the studio!

Origin Effects

Review by reddit /basspedals

Review by Gitarre & Bass

Demo by Nate Navarro

Sound Samples w/ Ian Martin Allison

DCX BASS

QuickMount Type B

Voodoo Lab

Pedal Power x8

Für 5-10 FX-Pedale, 1 MOD-Slot - **442 x 236 mm / 17.40" x 9.29"** - erhältlich mit Gig Bag oder Flight Case

For 5 - 10 FX pedals, 1 MOD slot - **442 x 236 mm / 17.40" x 9.29"** - available with Gig Bag or Flight Case

Paulo Damasceno Nepomuceno

These are the drives and preamps that i like or want to have(most of them i don't have lol)

The Sauce PT.3

Oscar Kezirian

Altoids

Altoids Smalls

Elod Bajrami

Michał Wrzos

Designed for bass, a favorite for guitar, this incredibly sub-frequency-preserving unit will hold on to the lowest lows like no fuzz ever heard before. It features a gentle gate for silencing your instrument between notes or phrases, and has an EQ control that smoothly selects between more bass and more treble.

ZVEX

Review by Luca Romeo

Woolly Mammoth Vexter

Basstortion

Mastotron

Mike Matthews, der Gründer von Electro-Harmonix, ist eine schillernde Figur. Die Hippie-Bewegung und die Evolution der E-Gitarre durch Jimi Hendrix diente ihm als Katalysator für die Entwicklung des bis heute populären Big Muff Verzerrers. Nach phänomenalem Wachstum seiner Firma in den goldenen Zeiten des Rock’n´Roll, den 1970er Jahren, folgte Anfang der 1980er die Ernüchterung – und schließlich die Pleite.

Mike Matthews, the founder of Electro-Harmonix, is a colorful figure. The hippie movement and Jimi Hendrix's evolution of the electric guitar served as a catalyst for him to develop the Big Muff distortion unit, which is still popular today. After phenomenal growth of his company in the golden age of rock'n'roll, the 1970s, disillusionment followed in the early 1980s - and finally bankruptcy.

Electro-Harmonix

Review by guitarfella.com

Review by Oliver Poschmann, bonedo.de

Demo by Reverb 

Demo by PMTVUK

Demo by FrostByte

Bass Big Muff Pi

PedalSafe Type C

QuickMount Type C

Pedalmontageplatte für große vertikale Pedale

Pedal Mounting Plate For Large Vertical Pedals

Schutzabdeckung & RockBoard-Montageplatte für große vertikale Pedale

Protective Cover & RockBoard Mounting Plate For Large Vertical Pedals

Schutzabdeckung & universelle Montageplatte für große vertikale Pedale

Protective Cover & Universal Mounting Plate For Large Vertical Pedals

FZ-2 Hyper Fuzz

FZ-3 Fuzz

Denys Kozakov

Boss FZ-1W Fuzz

Liam Shannon

Das Electro Harmonix Hot Wax Overdrive-Pedal ist ein weiterer Beweis für die Tatsache, dass man der New Yorker Effektschmiede eines nicht vorwerfen kann: Untätigkeit. Im Gegenteil steigt die Anzahl der neu auf dem Markt erhältlichen Pedale zumindest gefühlt wöchentlich!

Awesome on guitar and bass, the EHX Hot Wax fuses our Hot Tubes and Crayon pedals into one powerful dual-overdrive. Each section can be engaged independently, for two very different overdrive flavors, or together to create a massive overdriven sound.
The Hot Wax includes a two-knob EQ (BASS and TREBLE) for extensive tonal control, and a BLEND control to mix between your dry and distorted sound. These three controls are active with either or both distortion sections engaged, and bypassed when both overdrive section are turned off.

Demo by The Bass Channel 

Demo by Pedal Experiments

Review by Phil O'Keefe, harmonycentral.com

Review by gearnews.de

Review by Bassel Hallak, bonedo.de

HOT WAX

Fraser Grant

Der BASSRIG Fifteen ist ein rein analoge Amp-Rekreator-Preamp/D.I.-Pedal, basierend auf dem legendären Ampeg B-15 Portaflex-Kombi-Bassverstärker. Er bildet den Klang, das Spielgefühl und den Charakter des Original-B-15 nach mittels eines kompletten ventilähnlichen Signalweges im Miniaturformat. Er verfügt über eine analog simulierte 1×15-Lautsprechersimulation auf dem D.I.-Ausgang sowie eine eigene AMP OUT EQ, um den Klang an jeden Verstärker oder jede Box anzupassen. Der BLEND-Regler erlaubt das Beimischen des sauberen Signals für Klarheit und Artikulation.

The BASSRIG Fifteen is an all-analogue amp recreation preamp and DI pedal, based on the legendary Ampeg B-15 Portaflex amplifier. It recreates the sound, feel and character of the original B-15 studio bass combo using a full valve-style signal path in miniature. It features an all-analogue 1×15 cabinet simulator on the DI output and a dedicated AMP OUT EQ to tailor the sound to any amp or cab. The BLEND control allows you to mix clean signal in for clarity and articulation.

Demo by Andertons

Review by Sound On Sound

Review by Bass Gear Reviews

BassRig Fifteen

HM-2W Heavy Metal (Waza Craft)

Mit Leidenschaft entworfen von den Meisteringenieuren bei BOSS in Japan, bietet der Waza Craft SD-1W Super Overdrive ein erstklassiges Stomp-Erlebnis, das Fans von individuell abgestimmtem Pedal-Ton lieben werden. Der SD-1W wurde mit einem feinen Ohr für raffinierten Sound entwickelt und verfeinert den berühmten BOSS Overdrive mit rein analoger Schaltung. Der Standard-Modus fängt den klassischen SD-1-Sound ein, während der Custom-Modus eine neue Klangvielfalt und mehr Gain bietet.

Passionately designed by the master engineers at BOSS in Japan, the Waza Craft SD-1W Super Overdrive delivers a premium stomp experience that fans of customized pedal tone will love. Crafted with an ear for highly refined sound, the SD-1W hot rods the famous BOSS overdrive with all-discrete analog circuitry. Standard mode captures the classic SD-1 sound while Custom mode offers new tonal range and gain.

Demo by Pete Thorn

Demo by Pro Guitar Shop Demos

Review by TonePedia

Review by Guitar.com

SD-1W Super Overdrive (Waza Craft)

BD-2W Blues Driver (Waza Craft)

Jonathan James

„Knackige Overdrive-Effekte für Bass - Der ODB-3 Bass OverDrive liefert die brusthohe Verzerrung, auf die Hardrock-, Thrash- und Punk-Bassisten gewartet haben. Dieses heiße, kompakte Pedal wurde speziell für Bassanwendungen entwickelt.“ - Boss

"Crunchy Overdrive Effects for Bass-- The ODB-3 Bass OverDrive delivers the chest-resonating distortion that hard rock, thrash, and punk bassists have been waiting for. This hot compact pedal has been designed specifically for bass applications." - Boss

Demo by  Bass Stuff

Demo by  Freddy Despo—The Bass Place

Review by Ultimate Guitar

Review by bassic.de

ODB-3 Bass OverDrive

ch ray

Albino Rhino is an overdrive pedal that brings with it the duality and balances of a nature that borders on the apocalypse: behaving sometimes softly, sometimes wild, our powerful pedal can be used for first, second or even third stage of gain in your set!

It has two modes of operation: the "Tame", where the pedal works as a low-gain with a cleaner and more compressed characteristic, and the "Wild", where its true nature is revealed, starting to act as a mid-gain or as a high-gain distortion pedal, depending on the position of the gain knob, with tones that range from the sound of an amp "breakup" to a fuzzed distortion, being ideal for grunge, stoner, and some metal styles that require more "dirty".

Krozz Devices

Demo by  ajwithjetpacks

Review by Pedais & Efeitos

Albino Rhino

Isen Ritchie

DS-1W Distortion

Der Royalbreaker ist ein Verzerrungspedal, das jeden Möchtegern-Monarchen von Ihrem Pedalboard stoßen soll. Es kombiniert einen intensiven Verzerrungsbereich, der von dicken, aggressiven Tönen bis zu einer kraftvollen, druckvollen Reaktion reicht, und bietet die Flexibilität und Wirkung, die Gitarristen brauchen, um in jeder Umgebung hervorzustechen.

Inspiriert von revolutionären Themen ist der Royalbreaker nicht nur ein Pedal – er ist der Funke einer neuen Ära der Verzerrung auf Ihrem Pedalboard, der Ihre Kreativität dazu antreibt, Barrieren zu durchbrechen und Normen zu trotzen!

The Royalbreaker is a distortion pedal built to dethrone any would-be monarch from your pedalboard. Combining an intense distortion range that spans from thick, aggressive tones to a powerful, punchy response, it offers the flexibility and impact guitarists need to stand out in any setting.

Inspired by themes of revolution, the Royalbreaker isn’t just a pedal—it’s the spark of a new era of distortion on your pedalboard, pushing your creativity to break barriers and defy norms!

Review by delicious audio

Review by guitar pedals X

Demo by Kris Barocsi

Demo by  Ana Julia Braga (aj)

Royalbreaker Distortion

Maxime Rihet

The Royal Jelly is an overdrive/fuzz blender like no other pedal. It can cover any ground from overdrive to fuzz, running two circuits in parallel and giving you the possibility of blending it or having them separately. It also has two presets of the blend, called Queen and King. The presets allow you not only to have two different sounds on the fly, but also make for a very natural transition between them, since instead of switching pedals, you are mixing the levels between your overdrive and fuzz.
It’s also possible to blend in your dry signal, a great feature for bass, drums and synths or any studio use. On the guitar the DRY control is great to create unique clean tones with a fuzzy background.

Beetronics

Demo by Eric Merrow

Royal Jelly

Zur Feier des 40-jährigen Jubiläums der BOSS-Compact-Pedale haben sich BOSS und JHS Pedals zu einer historischen kreativen Zusammenarbeit zweier Branchenführer zusammengeschlossen. Untergebracht im klassischen BOSS-Compact-Design vereint das JB-2 Angry Driver die Sounds des legendären BOSS BD-2 Blues Driver mit dem beliebten Angry Charlie von JHS Pedals. In enger Zusammenarbeit entwickelten die beiden Pedalhersteller eine völlig neue kombinierte Schaltung mit optimiertem Sound und perfekter Abstimmung für den Dual-Mode-Overdrive-Betrieb.

Das JB-2 Angry Driver verfügt über drei Doppelpotis, die eine unabhängige Regelung von Drive, Tone und Level für jede der beiden Overdrive-Schaltungen ermöglichen. Über einen Sechsfach-Drehschalter lassen sich die beiden Overdrives einzeln oder kombiniert in Serien- oder Parallelbetrieb nutzen. Durch die Möglichkeit, den expressiven Low-to-Mid-Gain-Sound des Blues Driver mit der aggressiven Rock-Stimme des Angry Charlie in jeder erdenklichen Kombination zu mischen, bietet das JB-2 Angry Driver eine enorme Bandbreite und Vielseitigkeit in einem einzigen Overdrive-Pedal.

To celebrate the 40th anniversary of BOSS compact pedals, BOSS and JHS Pedals have come together in a historic creative collaboration between the two industry leaders. Housed in the classic BOSS compact design, the JB-2 Angry Driver pairs the tones of the iconic BOSS BD-2 Blues Driver with JHS Pedals’ popular Angry Charlie. Working closely together, the two pedal innovators have developed an all-new combined circuit with refined sound and performance perfectly tuned for dual-mode drive operation.

The JB-2 Angry Driver features three dual-concentric knobs that provide independent drive, tone, and level control for each overdrive type. Via a six-position mode selector, you can use each overdrive independently or combine them in series and parallel configurations. With the ability to blend the Blues Driver’s famously expressive low-to-mid gain tones with the Angry Charlie’s aggressive rock voice in any combination, the JB-2 Angry Driver delivers unmatched range and versatility from a single overdrive pedal.

Demo by Guitarist

Demo by JHS Pedals

JB-2 Angry Driver

Jonny Dibble

The BASSRIG ’64 Black Panel is, quite simply, a complete vintage bass amp in a pedal. Based on Fender®’s Showman® and Bassman® amplifiers, we have used all-analogue circuitry to recreate a complete valve amp-style signal path, along with an all-analogue cabinet simulator, giving you the drive, grit and articulation of these classic amps in one small box.

Demo by BassTheWorld.com

Official Product Video 

BASSRIG  ’64 Black Panel

The Formiga B. Drive can be used for bass, guitar or with any instrument that you may want to clip, distort and drown in harmonics.

With two parallel channels (Clean and Dirty), the final result is a harmonically rich distortion that greatly adds to your instrument tone. There are independent Low-Pass filters for each channel and three clipping options (Silicon, LED, OpAmp) that altogether offer a world of possibilities.

Cachalote Audio

Review by guitar pedal X

Demo by ajwithjetpacks

Formiga B. Drive

The Ushuaia Drive has an original circuit developed by Cachalote, featuring a 100% analog signal chain with only discrete components. This overdrive pedal embodies a bold personality with an amp-like dynamic breakup. It delivers clean and transparent tones, featuring an extremely responsive low-gain, a versatile mid-boost, classic overdrive tones, and can transition all the way to a full-bodied drive, rich in bass with a fuzz-like texture.

Its circuit has two saturation stages. The first one uses a MosFET transistor, and the second one uses a BJT 2n2222a metal-can transistor. The combination of a transistor with more advanced technology with one with classic characteristics provides a dynamic, organic, and articulate tone. The Ushuaia Drive is true-bypass with an internal relay and a soft-touch footswitch. 

Ushuaia Drive

DCX BASS von Origin Effects