ALEX SKOLNICK

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 1 V2 ist eine Pass-Through-Box, die speziell für Gitarristen und Bassisten entwickelt wurde. Du kannst das MOD 1 V2 nutzen um mehrere Pedale deines Setups im Front End und im Effekt-Loop des Verstärkers zu postieren (4-Kabel Methode) oder die vier TRS-Anschlüsse als zentralen Zugang und Ausgang des Boards nutzen. Die XLR-Through-Verbindung kann als Signalausgang vom Pedalboard zum Mischpult oder zur PA verwendet werden.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 5 x 6,3 mm TRS thru
- 1 x XLR thru (männlich vorne / weiblich hinten)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 5 x 6,3 mm / ¼" TRS thru
- 1 x XLR thru (male front / female back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR, IEC & Barrel Patchbay

Alex Main Pedal Board

Tester

Der Electro-Harmonix POG2 ist ein polyphoner Oktavgenerator für Gitarreneffekte, der es Musikern ermöglicht, reichhaltige, komplexe Klänge zu erzeugen, indem er bis zu fünf Oktavfärbungen gleichzeitig mischt. Das 2009 veröffentlichte Pedal verfügt über einen verbesserten digitalen Algorithmus für präzises Tracking, einen Attack-Regler für sanftes Einblenden von Obertönen und einen 2-poligen resonanten Tiefpassfilter mit wählbaren Q-Modi. Das Pedal bietet acht programmierbare Presets, mit denen Musiker ihre bevorzugten Oktavkonfigurationen und Klangeinstellungen speichern und sofort abrufen können. Mit seinem True-Bypass-Design und seiner Fähigkeit, alles von surrealen 18-saitigen Gitarrenklirren bis hin zu dicken symphonischen Klangwänden zu erzeugen, bietet der POG2 Gitarristen und Bassisten eine umfangreiche Klangpalette für kreative Klangexperimente.

The Electro-Harmonix POG2 is a polyphonic octave generator guitar effects pedal that allows musicians to create rich, complex sounds by blending up to five octave harmonics simultaneously. Released in 2009, it features an enhanced digital algorithm for precise tracking, an Attack control for smooth harmonic fade-ins, and a 2-pole resonant low-pass filter with selectable Q modes. The pedal offers eight programmable presets, enabling musicians to save and instantly recall their favorite octave configurations and sound settings. With its true bypass design and ability to generate everything from surreal 18-string guitar jangles to thick symphonic walls of sound, the POG2 provides guitarists and bassists with an expansive tonal palette for creative sound exploration.

Product Page

Review by Talk Bass.com

Review by reddit/guitarpedals

Review by Musiker-Board

Manual

Demo by Leon Todd

Demo by shnobel

POG2

PedalSafe Type O

QuickMount Type O

Pedal-Montageplatte für FRIEDMAN Overdrive Deluxe & WALRUS Descent Pedale

Pedal Mounting Plates for FRIEDMAN Overdrive Deluxe & WALRUS Descent pedals

Schutzabdeckung & RockBoard-Montageplatte für FRIEDMAN Overdrive Deluxe & WALRUS Descent Pedale

Protective Cover & RockBoard Mounting Plate For FRIEDMAN Overdrive Deluxe & WALRUS Descent pedals

Schutzabdeckung & universelle Montageplatte für FRIEDMAN Overdrive Deluxe & WALRUS Descent Pedale

Protective Cover & Universal Mounting Plate For FRIEDMAN Overdrive Deluxe & WALRUS Descent pedals

Nicolas Wilfer

Micro Synth

A versatile studio quality reverb in a small pedal format and user friendly design, utilizing our proven technique of paralleling analog with digital to get best of both worlds.

Features 3 different reverb algorithms fully customizable via decay and excite controls. A kill dry function is included via a push/pull knob that is great for volume swells without the need of your volume knob/pedal.

Algorithm I: The “exciter”. From a touch of ambience to spacious pad effect, especially on extreme settings.
Algorithm II: Moderate sized reverb. From a spring style reverb up to room and hall
Algorithm III : Large reverb. From hall to ambience

Review by Premier Guitar

Demo by sonicstate

Demo by MrExcane

Review by bonedo

Splash MkIII

ch ray

Entwickelt aus unserer Flaggschiff-Starlight Echo Station, bringt das Orion Tape Echo die magischen, sanften Delay-Effekte der klassischen 70er-Jahre Maestro Echoplex EP-III Tape-Delays in einem eleganten, kompakten Format.

Emerging from our flagship Starlight Echo Station, Orion Tape Echo gives you the magical hazy delay effects of vintage ’70s Maestro Echoplex EP-III tape delays, in a classy, compact package.

Review by Gearnews

Manual Page

Demo by EytschPi42

Official Product Video

Orion Tape Echo

MXR knows phasers. The Phase 90's compact size, superior construction, and refined sound put MXR on the map, and it set the standard by which all other phasers are judged. Two years later, MXR released the Phase 45—a mellower version of the effect favored for its ability to easily blend into a band's mix. Now, you can get both iconic circuits in a single pedal while tightening up your pedalboard at the same time. The Phase 95 combines the Phase 45 and Phase 90 circuits in a mini housing with about half the footprint of a standard MXR pedal. The 45/90 switch toggles between the Phase 45 mode's subtle two-stage phasing and the Phase 90 mode's more pronounced four-stage phasing, while the Script switch toggles between two phasing styles. The Phase 95 is set to modern style phasing by default, which relies on feedback to create light harmonic distortion and gives the effect a more accentuated swoosh. Engaging the Script switch removes feedback for a lusher, more subdued sound with higher headroom and greater clarity. The familiar Speed control sets the rate of the effect. The Phase 95 may be small, but it's full of rich phase tones, and it'll take a beating on the road.

Product Page 

Product Manual 

MXR Phase 95

M290 Phase 95

Creamy tones, detailed response and gain-wide articulation, times two: The Double Dreamer!

Housing our two single overdrive units the Tubedreamer and Lucydreamer under one roof, the Double Dreamer hosts 3 unique key features that offer maximum tone variety, practicality and functionality in the smallest footprint possible while remaining 100% handmade just like all of our designs!

— High-gain-stage footswitch
— 3-way-toggle switch that routes the high-gain-stage footswitch to work with either the Tubedreamer, the Lucydreamer or both

— Internal dip switches that reroute the IN and OUT jacks to work as Send-Returns for each Overdrive side, allowing you to individually engage each side with your switcher, or place them in different points in your signal chain. If you are using a stereo setup you can pair the TD side with one amp and the LD side with another for lush parallel overdrive sounds!

The Tubedreamer (Left Side) is our take on the legendary 808 Tubescreamer with a carefully tuned midrange frequency register delivering a warm and rich overdriven sound through any amp! A pivotal difference between the TD and other Tubescreamers, is that we chose to go with 3 diodes for asymmetrical clipping instead of symmetrical, enhancing the responsiveness of the pedal to fretting and picking nuances. The Tubedreamer employs the JRC4558D chip to deliver its classic sound, just like in the original, sought-after 808’s.

The Lucydreamer (Right Side) is a Dry / Wet overdrive which has less of a mid hump than our Tubedreamer, and allows for more low end to come through. It can track every little nuance of your playing with a wide gain-stage spectrum, ranging from highly dynamic tube- amp-like break-up, all the way to full-bodied high-gain saturation with the assistance of the high-gain-stage footswitch, while effortlessly maintaining chord-voicing clarity! The “secret” chip it bases its sound on, along with its different clipping implementation compared to the TD, allow the Lucydreamer to pair perfectly with the TD adding layers of harmonic content on tap!

Combine the two for new and exciting gain structures and assign the high-gain-stage footswitch to taste, making for up to six different gain-stages accessible in real time!

Alex Skolnick | Lending a Hand with JAM pedals

Double Dreamer Alex Skolnick

The Blue Note Tour gives you a very woodsy blues overdrive feel and can achieve more gain than a typical tube screamer (no this isn’t another TS clone just using this as a reference).

This pedal is all about feel and really works well with any guitar/amp combination. 

Sonically Identical to the Pro Series Blue Note, but without the “Hot Switch” and in a more compact enclosure.

Review by Gitarre & Bass

Review by Guitar.com

Demo by N Stuff Music

Blue Note Tour

Review by GuitarJar

Signal Boost

thuy nguyen

A JAM pedals favorite for a lot of guitar, bass and keyboard players, the WaterFall is serving as a mainstay on boards of such greats as John Scofield, Nels Cline, Steve Lukather, Anthony Jackson and John Mesdeski for many years now, and has established itself as one of the best analog BBD chorus/vibrato pedals in the market.

It features 2 toggle-switches, the first to select between chorus and vibrato modes, and the other to switch to a “wetter” effect resulting in a deeper, more contemporary sounding chorus, or a more intense, deranged vibrato sound! Max out the Depth and Speed controls to get Leslie-speaker type effects!

The WaterFall is an extremely versatile, rich, 3D sounding, tone- machine that has converted even the most rigid of chorus-haters!

Review by Tone Pedia

Demo by Fat Bass Tone

Demo by Chris Kollias

WaterFall Bass

PedalSafe Type B1

QuickMount Type B1

Pedal-Montageplatte für FRIEDMAN, KEELEY Halo, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD, Jupiter V2 Pedale

Pedal Mounting Plate for FRIEDMAN, KEELEY Halo, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD, Jupiter V2 pedals

Schutzabdeckung & RockBoard-Montageplatte für FRIEDMAN, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD & Jupiter V2 Pedale

Protective Cover & RockBoard Mounting Plate For FRIEDMAN, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD & Jupiter V2 pedals

Schutzabdeckung & universelle Montageplatte für FRIEDMAN, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD & Jupiter V2 Pedale

Protective Cover & Universal Mounting Plate For FRIEDMAN, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD & Jupiter V2 pedals

ISO Power Block V12 IEC

Das RockBoard RBO B 4.1 QUAD B Pedalboard bietet Platz für ca. 7 bis 12 Pedale (entsprechend der Größe der Pedale) und wird mit einem ideal abgestimmten Gig Bag geliefert. Die robuste, wasserabweisende RokTex Oberfläche, der verstärkte Boden aus PVC (Polyvinylchlorid) und die 10 mm Polsterung bieten den perfekten Schutz bei leichtem Transport. Die RockBoard Pedalboard Serie wurde komplett designt, um ein Pedalboard zu schaffen, das leicht, verwindungssteif und robust ist und vor allem die Nutzung einer weiten Bandbreite an Pedalen, als auch Stromversorgungen und deren Montagelösungen erlaubt. Sein einzigartiges und geniales Design basiert auf nur einem einzigen kaltgewalztem Aluminiumblech und hat keine einzige Schweißnaht. Dadurch bietet es eine absolut flache Oberfläche, die komplett genutzt werden kann. U-förmige vertikale Streben geben dem Board zusätzliche Stabilität, ohne es merklich schwerer zu machen, dadurch ist das Board komplett verwindungssteif und verbiegt sich nicht unter maximaler Auslastung. Das innovative Slot-Design funktioniert mit gängigen Montage-Lösungen oder, perfekt, mit unserem RockBoard QuickMount System. Außerdem machen die Slots es einfach, Kabel für einen sauberen Aufbau unter der Board-Oberfläche zu verlegen. Nahezu alle gängigen Netzteile lassen sich entweder direkt unter der Board-Oberfläche oder mit unserem optional erhältlichen The Tray oder BasePlates montieren. Alle RockBoard Modelle (außer der DUO Serie) sind mit den RockBoard All-in-One PatchBays kompatibel, die jedes RockBoard sinnvoll erweitern.

Pedalboard für Effektgeräte
für ca. 7 bis 12 Effektpedale (je nach Größe)
verwindungssteife und leichte Aluminium-Konstruktion
Slot Design für einfache Pedal-Montage
rechts-seitige Montagebohrungen für RockBoard LED Light (nicht im Lieferumfang enthalten)
hergestellt aus 1 kalt-gewalztem Aluminium Blech
zusätzliche Versteifung durch U-Förmige Stützstrebe
absolut flache, 10° angewinkelte Boardfläche - keine Schweißnähte
Einschub für RockBoard® Module Patchbays
kompatibel mit RockBoard® The Tray - universelle Power Supply Montage Lösung
robuste schwarz pulver-beschichtete Oberfläche
Breite 470 mm
Tiefe 330 mm
Höhe inkl. Gummifüßen 37 - 71 mm
Gewicht Board 1,5 kg
inklusive Gigbag
Gewicht Gigbag ca. 1,5 kg
Innenmaße Gigbag (B x T x H) 505 x 370 x 130 mm
inklusive selbstklebendem Klett- (50 mm breit) und Flauschband (25 mm breit) sowie Kabelbindern

The RockBoard RBO B 4.1 QUAD B pedalboard offers space for approx. 7 to 12 pedals (depending on the size of the pedals) and comes with a perfectly matched gig bag. The robust, water-repellent RokTex surface, the reinforced PVC (polyvinyl chloride) bottom, and the 10 mm padding offer perfect protection while providing easy transportation. The RockBoard pedalboard series has been designed to create a pedalboard that is lightweight, warp resistant, and robust, and above all, allows the use of a wide range of pedals, as well as power supplies and their mounting solutions. Its unique and ingenious design is based on only a single cold-rolled sheet of aluminum without a single weld. As a result, it offers a flat surface that can be fully utilized. U-shaped vertical braces give the board extra stability without making it noticeably heavier, making the board completely torsion-resistant and preventing bending even under maximum load. The innovative slot design works with common mounting solutions or, perfectly, with our RockBoard QuickMount system. In addition, the slots make it easy to route cables under the board surface for a clean setup. Almost all common power supplies can be mounted either under the board surface directly or by using our optionally available RockBoard The Tray or BasePlates. All RockBoard models (except the DUO series) are compatible with our RockBoard All-In-One PatchBays, which are a useful addition to any RockBoard.

pedalboard for effects pedals
for approx. 7 to 12 effects pedals (depending on size)
sturdy and light aluminum construction
slotted design for easy pedal mounting
mounting holes for RockBoard LED Light (not included) on the right side
made from 1 cold-rolled aluminum sheet
additional U-shaped support brace for added rigidity
10 degrees angled and absolutely plain board surface - no weld seams
slot for RockBoard® MOD patch bays
compatible with RockBoard® The Tray - universal power supply mounting solution
robust black powder-coated surface
width 470 mm / 18 1/2"
depth 330 mm / 12 63/64"
height incl. rubber feet 37 - 71 mm / 1 7/16" - 2 13/16"
weight 1.5 kg / 3.3 lbs.
including gig bag
weight gig bag approx. 1.5 kg / 3.3 lbs.
interior dimensions gig bag (L x W x D) 505 x 370 x 130 mm / 19 7/8" x 14 9/16" x 5 1/8"
including self-adhesive hook (50 mm / 1 15/16" wide) & loop tape (25 mm / 1 wide) and cable ties

RockBoard Artists

Aktivitäten Übersicht

News

Alex Main Pedal Board

electro-harmonix

POG2

electro-harmonix

Micro Synth

Crazy Tube Circuits

Splash MkIII

Universal Audio

Orion Tape Echo

MXR

M290 Phase 95

Jam Pedals

Double Dreamer Alex Skolnick

J. Rockett Audio Designs

Blue Note Tour

Moollon

Signal Boost

Produkte

Bau dein Board

Services

Community