Marcell Janssen

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 1 V2 ist eine Pass-Through-Box, die speziell für Gitarristen und Bassisten entwickelt wurde. Du kannst das MOD 1 V2 nutzen um mehrere Pedale deines Setups im Front End und im Effekt-Loop des Verstärkers zu postieren (4-Kabel Methode) oder die vier TRS-Anschlüsse als zentralen Zugang und Ausgang des Boards nutzen. Die XLR-Through-Verbindung kann als Signalausgang vom Pedalboard zum Mischpult oder zur PA verwendet werden.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 5 x 6,3 mm TRS thru
- 1 x XLR thru (männlich vorne / weiblich hinten)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 5 x 6,3 mm / ¼" TRS thru
- 1 x XLR thru (male front / female back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR, IEC & Barrel Patchbay

Best Of Both Worlds

Tester

A True Strobe Tuner in a Mini Stompbox Format

Sonic Research

Product Page

Review by Anatomy of Guitar Tone

Manual

Review by The Gear Page

Demo by fiveightandten

Demo by Adam White

St-300 Turbo Tuner Mini

David Litaba

Beim Strymon Cloudburst handelt es sich um ein Stereo-Reverb mit übersichtlicher Bedienung und kompakten Maßen, das auf dem Cloud-Algorithmus des Strymon Big Sky basiert.

A simple and straightforward atmosphere machine spans deep, orchestral ambient reverbs and colorful room sounds.

Strymon

Review by Bonedo 

Review by Amazona 

Demo by Pete Thorn

Demo by Andertons Music 

Cloudburst Ambient Reverb

Adrian Gutierrez

Review by AMAZONA

Review by reddit /guitarpedals

Demo by Antoine Michaud

Demo by Vintage Guitar Workshop

blueSky V1

Mariano del Moral

The Cali76 FET Compressor is a studio-grade compressor pedal inspired by the world-famous Urei® 1176® studio compressor, heard on many of the greatest studio recordings since the 1960s. The Cali76 FET Compressor uses uncompromising all-analogue circuitry to make these distinctive, ultra-fast FET compression tones available to the modern guitarist.

Origin Effects

Official Product Video

Review by Compressor Pedal Reviews

Review by Gearnews

Review by OVNI LABS

Manual download

Cali76 Fet Compressor (Brushed Aluminium)

ch ray

Quad Cortex ist der leistungsstärkste Floor-Modeler der Welt. Mit insgesamt 6 Kernen (4x SHARC+ und 2x ARM Cortex-A5 mit jeweils 500 MHz) eröffnet diese unglaubliche Rechenleistung grenzenlose Möglichkeiten im Bereich des Sounddesigns.

Quad Cortex is the most powerful floor modeler on the planet. With a total of 6 cores (4x SHARC+ and 2x ARM Cortex-A5 running at 500MHz each), this ludicrous amount of processing capacity provides limitless sound design possibilities.

Neural DSP

Review by wired

Review by Fractal Audio Forum

Review by guitarguitar

Quad Cortex 2.0 manual

Demo by EytschPi42

Demo by Neural DSP

Quad Cortex

PedalSafe Type NRL

QuickMount Type NRL 

Pedal-Montageplatte für das NEURAL DSP Quad Cortex Pedale

Pedal Mounting Plate for the NEURAL DSP Quad Cortex pedal

Schutzabdeckung & RockBoard-Montagep für NEURAL DSP Quad Cortex Pedal

Protective Cover & RockBoard Mounting Plate For NEURAL DSP Quad Cortex pedal

Schutzabdeckung & universelle Montageplatte für NEURAL DSP Quad Cortex Pedal

Protective Cover & Universal Mounting Plate For NEURAL DSP Quad Cortex pedal

James Morse

The greatest pieces of studio gear are the ones that add something special to the sound of an instrument, going beyond the job they were designed for and enhancing anything that passes through the circuit. One such piece is the UA 610 preamp, which was the inspiration for the DCX Boost. This retro console preamp is famous for adding vintage, analogue colour to a signal, as well as precise control of level and EQ. Push the level harder and you get rich, harmonic saturation of the kind that makes analogue hardware a must-have in any present-day studio.

The DCX Boost reimagines this classic preamp as a tone-shaper and drive pedal for guitar, with a wide range of clean and overdrive tones, EQ frequencies optimised for the instrument, and our Adaptive Circuitry providing a treble response that reacts to playing dynamics. It’s a signal-boosting, tone-enhancing pedal straight from the studio!

Review by bonedo

Review by Guitar World

Demo by AndyDemos 

Demo by Peach Guitars

DCX BOOST

Die Walrus Audio Julia ist ein komplett analoges Chorus/Vibrato-Pedal, das mit einigen Besonderheiten aufwarten kann. Obwohl es sich bei den beiden um alteingesessene Standard-Effektsounds handelt, versteht es der amerikanische Boutique-Hersteller, mit einigen Extras jenseits der Norm Interesse zu wecken.
So auch bei der Julia, bei der beispielsweise fließend mit einem Blend-Regler zwischen Chorus und Vibrato gewechselt werden kann. Dazu lässt ein Schalter die Wahl, den LFO zu Sinus- oder Dreieck-Wellenformen zu überreden. Was diese Funktionen klanglich bewirken, schauen wir uns im Folgenden an.

Julia analog chorus and vibrato from WalrusAudio.com. Julia offers a unique blend knob to blend your dry signal with chorus or blend between chorus and vibrato.

Walrus Audio

Review by guitar 

Review by bonedo 

Demo by Mike Hermans 

Demo by SweetWater 

Demo by Nobel Music 

JULIA

PedalSafe Type B1

QuickMount Type B1

Pedal-Montageplatte für FRIEDMAN, KEELEY Halo, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD, Jupiter V2 und Mooer GL 100 Pedale

Pedal Mounting Plate for FRIEDMAN, KEELEY Halo, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD, Jupiter V2 and Mooer GL 100 pedals

Schutzabdeckung & RockBoard-Montageplatte für FRIEDMAN, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD & Jupiter V2 Pedale

Protective Cover & RockBoard Mounting Plate For FRIEDMAN, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD & Jupiter V2 pedals

Schutzabdeckung & universelle Montageplatte für FRIEDMAN, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD & Jupiter V2 Pedale

Protective Cover & Universal Mounting Plate For FRIEDMAN, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD & Jupiter V2 pedals

Michael Hodgson

The EP-25K features a 25K Ohm potentiometer that is required by some devices compared to the 10K potentiometer in the Mission EP-1. The two isolated outputs can be used to control two effects simultaneously.

Mission Engineering

Demo by Sean Pierce Johnson

EP-25K Expression pedal

Berry Gibson

El Capistan V1

Gilles Peynet

KingTone

Kingtone Website 

Demo by Buddy Blues

Mini Fuzz v1

ISP Technologies

Deci-Mate

julien Tabarly

The Protein 2 in 1 Overdrive is a collaboration between David Brown and guitarist/producer Adam Sniegowski.  After years on the road and in the studio using backline amps that could be very inconsistent,  Adam came to Dave wanting to create a dual overdrive that would sound great with any backline he encountered. They started with two drives they loved, stacked well together, but had a few inherent issues. Dave set out to fix those issues without losing the soul of the originals.

Browne Amps

Review by ThatGuitarLover

Overdrive Comparison by That Pedal Show 

Demo by Michael W. Westbrook 

 Demo by Alberto Berrero

Demo by Jackson Brooksby

Demo by Ben Neal

Protein Dual Overdrive V3 (Black)

Mit mehr als 20 Jahren an Expertise im Bereich Reverb-Modeling legt Dir UAFX Golden Reverberator ein Trio der besten legendären Reverbs direkt zu Füßen. Der röhrenbetriebene Federhall klassischer Gitarrenverstärker der 60er Jahre. Der dichte und eindringliche Klang von 50er Jahre Studio Plate-Reverbs. Das unendliche algorithmische Wunder der frühen digitalen Reverb-Hardware.

Basierend auf dem leistungsstarken UAFX Dual Engine Processing und einem noch nie dagewesenen Maß an klanglicher Authentizität ist der Golden Reverberator ein kompromissloses Flaggschiff Hallgerät, das Dich jahrzehntelang inspirieren wird.

Harnessing more than 20 years of reverb modeling expertise, UAFX Golden Reverberator puts a trio of iconic reverbs right at your feet. The tube-driven spring reverb of classic ’60s guitar amps. The dense and haunting sound of ’50s studio plate reverbs. The endless algorithmic wonder of early digital reverb hardware.

Built upon powerful UAFX dual-engine processing and unprecedented levels of sonic authenticity, Golden Reverberator is a flagship, no-compromise reverb unit, built to inspire you for decades

Universal Audio

Review by Sam Goffen, samgoffenguitar.com

Review by Thomas Dill, bonedo.de

Demo by Kris Barocsi

Demo by Mattjew Kelly

Golden Reverberator

Demo by StrobeTuner

ST-300 Turbo Tuner

Für 7-12 FX-Pedale, 1 MOD-Slot - **598 x 236 mm / 23.54" x 9.29"** - erhältlich mit Gig Bag oder Flight Case

For 7 - 12 FX pedals, 1 MOD slot - **598 x 236 mm / 23.54" x 9.29"** - available with Gig Bag or Flight Case

Jack Paulin

DEL/VERB/MOD 2.1

GREGORY GUENEAU

Das Universal Audio UAFX Brigade Chorus & Vibrato ist ein kompaktes digitales Pedal, das den legendären Boss CE-1 Chorus Ensemble von 1976 authentisch emuliert. Es bietet warme, analog klingende Modulationseffekte, darunter üppigen Chorus und reichhaltiges Vibrato, sowie die charakteristische Vorverstärkerfärbung des Originals. Das Pedal verfügt über einfache Bedienelemente – Rate, Depth und Level – und bietet Schalter zur Auswahl zwischen Chorus- und Vibrato-Modus, True- oder Buffered-Bypass sowie zur Aktivierung des Vorverstärkers. Entwickelt für Mono-Ein- und -Ausgänge, ist das Brigade mit der renommierten Handwerkskunst von Universal Audio für zuverlässige Leistung gebaut.

Way back in 1976, the first commercially available chorus pedal was released. The massive tank-like piece of hardware is still touted by many guitarists as the finest chorus ever crafted due to its thick, watery, and rippling chorus (and vibrato) tones. The UAFX Brigade is Universal Audio’s ultra-precise sonic tribute to that long-discontinued pedal, sporting an immaculate bucket brigade chorus/vibrato digital emulation that builds off of UA’s modern-classic Astra Modulation Machine algorithms. However, unlike the pedal of Brigade’s inspiration (or even the Astra), this pedal comes equipped with a supremely straightforward setup of three simple knobs and a 2-way switch to swap between chorus and vibrato. Furthermore, the Brigade features spot-on modeling of an analog preamp modeling section to impart your signal with a touch of old-school character and potent vintage-style punch. Capture the chorus tone that started it all with Universal Audio’s UAFX Brigade!

Review by Sound on Sound

Demo by Sweetwater

Demo by Guitar Center

Demo by BUZZBEE TV

Quick Start Guide

Brigade Chorus & Vibrato

Entwickelt aus unserer Flaggschiff-Starlight Echo Station, bringt das Orion Tape Echo die magischen, sanften Delay-Effekte der klassischen 70er-Jahre Maestro Echoplex EP-III Tape-Delays in einem eleganten, kompakten Format.

Emerging from our flagship Starlight Echo Station, Orion Tape Echo gives you the magical hazy delay effects of vintage ’70s Maestro Echoplex EP-III tape delays, in a classy, compact package.

Manual Page

Orion Tape Echo

MXR knows phasers. The Phase 90's compact size, superior construction, and refined sound put MXR on the map, and it set the standard by which all other phasers are judged. Two years later, MXR released the Phase 45—a mellower version of the effect favored for its ability to easily blend into a band's mix. Now, you can get both iconic circuits in a single pedal while tightening up your pedalboard at the same time. The Phase 95 combines the Phase 45 and Phase 90 circuits in a mini housing with about half the footprint of a standard MXR pedal. The 45/90 switch toggles between the Phase 45 mode's subtle two-stage phasing and the Phase 90 mode's more pronounced four-stage phasing, while the Script switch toggles between two phasing styles. The Phase 95 is set to modern style phasing by default, which relies on feedback to create light harmonic distortion and gives the effect a more accentuated swoosh. Engaging the Script switch removes feedback for a lusher, more subdued sound with higher headroom and greater clarity. The familiar Speed control sets the rate of the effect. The Phase 95 may be small, but it's full of rich phase tones, and it'll take a beating on the road.

Product Page 

Product Manual 

MXR Phase 95

M290 Phase 95

Jordan Lund

Taking its cue from Universal Audio’s Astra Modulation machine, the UAFX Flow vintage tremolo pedal delivers a vintage-tinged trio of tube-style tremolo effects. This pedal packages Universal Audio’s world-renowned digital algorithm technology into a compact enclosure, providing guitarists with the instantly gratifying feel of a traditional 3-knob stompbox. Flow offers two classic tube-driven tremolo algorithms, from the funky brown-panel magic of Dharma to the choppy optical tremolo of 65. In addition, Flow also sports a bold square-wave trem built from the ground up by UA that utilizes virtual optical photocell technology. Moreover, as the Flow’s sonic inspiration hails from history’s most sought-after tube amps, this pedal also boasts spot-on emulation of a tube preamp section's rich and character-filled voice. You also get a tap tempo function for effortless rhythmic synchronization. Tap into history’s most legendary tube-based tremolo circuits with Universal Audio’s Flow!

Review by delicious audio

Flow Vintage Tremolo

Del-Verb Ambience Companion basiert auf der preisgekrönten UAFX Dual-Engine Verarbeitung mit atemberaubender klanglicher Authentizität und liefert sofort einsetzbare Emulationen klassischer Reverb- und Delay-Effekte in einem Pedal, das für unmittelbare Inspiration konzipiert wurde.

Built upon award-winning UAFX dual‑engine processing and stunning sonic authenticity, Del‑Verb Ambience Companion packs ready‑to‑wear emulations of classic reverb and delay effects, in a pedal designed for immediate inspiration.

Quick Start Manual

Demo by Jorb

Demo by CoreyCongilio

Demo by Joey Jones 

Official Product Video by Universal Audio 

Del-Verb Ambience Companion

Für 4-7 FX-Pedale - **470 x 142 mm / 18.50" x 5.59"** - erhältlich mit Gig Bag oder Flight Case

For 4 - 7 FX pedals - **470 x 142 mm / 18.50" x 5.59"** - available with Gig Bag or Flight Case

William Scarbow

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 3 V2 ist eine Patchbay für Sänger und Akustik-Musiker. Über die zwei XLR-Ausgänge kannst du ein Stereo-Signal von dein MOD senden und an den XLR-Eingang lässt sich ein Mikrofon anschließen. Mit drei TRS-Through-Verbindungen lässt sich das MOD 3 V2 außerdem als zentraler Zugang und Ausgang des Boards nutzen um zum Beispiel Effektpedale in den FX-Loop eines Verstärkers einzuschleifen.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 3 x 6,3 mm TRS thru
- 2 x XLR thru (männlich vorne / weiblich hinten)
- 1 x XLR thru (weiblich vorne / männlich hinten)
- 1 x DC 2,1 x 5,5 mm Hohlstecker thru
- 1 x AC IEC thru (männlich vorne / weiblich hinten)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel


The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 3 V2 is a pass-thru box designed for use by vocalists and acoustic players. The 2x XLR outputs allow you to send a stereo signal from your MOD and the 1x XLR input can be used to connect your microphone. You can also use it to run several pedals from your board through the effects loop of your amp, or simply use the MOD as a central access point to your pedalboard.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 3 x 6,3 mm / ¼" TRS thru
- 2 x XLR thru (male front / female back)
- 1 x XLR thru (female front / male back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR Patchbay for Vocalists & Acoustic Players

Helix Future-Proof

The Rowin Dumbler effects pedal is a vintage Dumble amp simulator, which provides an unmistakeable, classic overdrive sound. Shape your sound via the gain, tone and master volume dials; these functions provide optimum control for your desired effect. This great value pedal also features a Voice dial, which adds a crisp bite and allows you to adjust the colour of your overdrive sound.

Metal shell

Rowin

Demo by intheblues

Demo by Goos

LEF-315 Dumbler

PedalSafe Type L

QuickMount Type L

Pedal-Montageplatte für Standard-Mini-Pedale

Pedal Mounting Plate For Standard Mini Pedals

Schutzabdeckung & RockBoard-Montageplatte für MXR, PIGTRONIX, XOTIC, XVIVE und viele weitere Pedale mit Mini Gehäusen

Protective Cover & RockBoard Mounting Plate For MXR, PIGTRONIX , XOTIC, XVIVE and many other effect pedals in mini enclosures 

Schutzabdeckung & universelle Montageplatte für MXR, PIGTRONIX, XOTIC, XVIVE und viele weitere Pedale mit Mini Gehäusen

Protective Cover & Universal Mounting Plate For MXR, PIGTRONIX , XOTIC, XVIVE and many other effect pedals in mini enclosures 

Drive, Volume, & Tone Controls: pretty standard fare one most overdrives for letting you dial in the gain, adjust the output volume, and find just the right tonal balance.
HP/LP Switch: The High-Peak function gives you increased distortion and low-end, thickening up your sound for a more “British” flavor. The Low-Peak mode gives you a more accurate rendition of your sound with very little coloration of your tone

Mosky

Demo by Tommy Use

Demo by Pedal Fight

Obsessive Overdrive

Tristan NDinga

Ampero multi-effects processor proved itself to be a game changer for its huge tone, great versatility and tiny size. Since first launched, it quickly become popular among both starters and pro musicians. For the best possible portability, the footswitch amount on Ampero is limited – however for the players who want more flexibility on this unit, that's not enough…So here it comes the Ampero Switch, Ampero's best pal!

The Ampero Switch is an ultra compact momentary footswitch controller designed not only for Ampero, but also for other devices with momentary footswitch controller support. Featuring the same Aluminum casing and appearance theme design, Ampero Switch definitely matches your Ampero's vibe perfectly. Carefully selected footswitches and other components ensure comfortable switching and excellent endurance.

It's quite simple: connect the TRS jack to Ampero's EXP 2/FS jack with the attached TRS cable, then enter Global menu, find EXP 2/FS sub menu, set MODE to Dual FS. After this, you can assign any function you need to the footswitches.

HOTONE

Demo by HotoneAudio

FS-1 Ampero Switch

bob bob

Demo by Steve Reaves Music

Demo by  g@thYET

Mini C4 Compressor

Andrea De Blasio

Sweetwater exclusive.
Multi-effect processor with the helix sound Over 300 effects and models from the Helix, M series and other Line6 products 6 Simultaneously usable amplifiers, boxes and effect blocks - including looper and IR loading Coloured LC display Integrated audio interface 3 Footswitches with colour-coded LED rings MIDI In and Out Expression pedal connection Input: L / Mono and Right Output: L / Mono and Right USB MIDI In and Out / Thru Headphone output FX loop Aux in Dimensions: 17.8 x 12.6 x 6.6 cm Weight: Approximatey 800 g Connection for 9 V DC 3 A power supply Includes power supply

LINE 6

Review by musicradar

Demo by Guitar Bonedo

HX Stomp - Cosmic Gray

PedalSafe Type L6

QuickMount Type L6

Pedal-Montageplatte für LINE6 HX Stomp Pedale

Pedal Mounting Plate for LINE6 HX Stomp pedals

Schutzabdeckung & RockBoard-Montageplatte für LINE6 HX Stomp Pedale

Protective Cover & RockBoard Mounting Plate For LINE6 HX Stomp pedals

Schutzabdeckung & universelle Montageplatte für LINE6 HX Stomp Pedale

Protective Cover & Universal Mounting Plate For LINE6 HX Stomp pedals

Jeff Wingo

Das SONICAKE Expression Pedal Vexpress ist ein passives Lautstärke-/Expressionspedal für alle, denen ein Expression-Pedal in voller Größe zu schwer ist und einfach zu viel Platz auf dem Pedalboard einnimmt.

Wenn du das Pedal als Expression-Pedal verwenden willst, lass die Eingangsbuchse offen und verbinde die Ausgangsbuchse mit einem 1/4"-Stereokabel mit dem Gerät.

SONICAKE Expression Pedal Vexpress is a passive volume/expression pedal for those people who think that a full-size, expression pedal may be a little heavy, and simply took too much space on the pedal board.

Used as an expression pedal, leave the input jack unconnected, and connect the output jack to the device with a stereo 1/4" cable.

Vexpress

Cloudburst Ambient Reverb by Strymon