Karl K

Acoustic Board

Out to FOH/Mixer

Steven Gonzalez

We know there's only so much room on your pedalboard. Here's a no-nonsense mini pedal that will get you ready to rock in seconds...

FAST & ACCURATE: Experience speedy tuning with A1 precision. Housed in a mini pedal that's designed to fit on any pedalboard, the TinyTune lets you to spend less time tuning and more time playing.

EASY-TO-READ DISPLAY: The color display is large, clear, and has excellent visibility under any lighting. So whether you are playing at home, on a dark stage, or outdoors, this pedal has you covered!

ZERO NOISE: The TinyTune completely mutes the input signal when you're tuning, and directly routes the signal to the output when you're not. No tone coloring, or annoying "pop" and "hum" noises here.

BUILT TO LAST: With rugged aluminum on the outside and quality components on the inside, this pedal will perform night after night, stomp after stomp. So that you can sound your best every single time.

KLIQ

Product Page

Manual

Demo by guitarlancer

TINYTUNE

Arnold Hablewitz

Die Radial Engineering Pro DI ist eine kompakte, passive DI-Box, welche sich sehr gut für Keyboards, Drumcomputer und Digitalpianos eignet. Die eigens dafür entwickelten Audioüberträger entsprechen dem außergewöhnlichen Qualitätsmaßstab, der durch den Industriestandard Radial Engineering JDI etabliert wurde.

The ProDI is a passive direct box designed for use on stage or in home recording studios, with the ability to handle high output instruments without distortion, and a transformer-isolated output to eliminate noise from ground loops

Radial Engineering

Review by Guitar Gear 

Demo by Audio University

Official Product Video

Review by Audiofanzine

ProDI

Tester

The Empress buffer was designed to be the complete I/O interface for the pedal board, while maintaining the highest fidelity to your guitar's signal.
Signal loss due to long, un-buffered cable runs is an issue that has plagued guitar players for decades. The primary goal of the buffer is to eliminate this signal loss, ensuring that your tone is unchanged by your cables.

Empress Effects

Buffer

Thiago Damasco

ZOOM

A1X Four

Für 5-10 FX-Pedale, 1 MOD-Slot - **442 x 236 mm / 17.40" x 9.29"** - erhältlich mit Gig Bag oder Flight Case

For 5 - 10 FX pedals, 1 MOD slot - **442 x 236 mm / 17.40" x 9.29"** - available with Gig Bag or Flight Case

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 1 V2 ist eine Pass-Through-Box, die speziell für Gitarristen und Bassisten entwickelt wurde. Du kannst das MOD 1 V2 nutzen um mehrere Pedale deines Setups im Front End und im Effekt-Loop des Verstärkers zu postieren (4-Kabel Methode) oder die vier TRS-Anschlüsse als zentralen Zugang und Ausgang des Boards nutzen. Die XLR-Through-Verbindung kann als Signalausgang vom Pedalboard zum Mischpult oder zur PA verwendet werden.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 5 x 6,3 mm TRS thru
- 1 x XLR thru (männlich vorne / weiblich hinten)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 5 x 6,3 mm / ¼" TRS thru
- 1 x XLR thru (male front / female back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR, IEC & Barrel Patchbay

New Pedal Board

DA-50

Das TC Electronic Thunderstorm Flanger Pedal bietet einen Vintage Stil Flanger-Effekt, ausgestattet mit einer Bucket-Brigade-Schaltung für einen hervorragenden Klang. Das innovative Design ermöglicht Ihnen eine einfache Bedienung, indem Sie einfach den Regler drehen, bis Sie Ihren perfekten Flanger-Ton gefunden haben

The TC Electronic Thunderstorm Flanger is a fully analog bucket-brigade based flanger pedal effect. It perfectly captures the classic vintage tones from the legendary days at an affordable price. From the guitar sounds that made the ´80s and all the way back to the classic ´60s psychedelic riffs, or just for creating experimental tones – The TC Electronic Thunderstorm Flanger is a lot of fun!

TC Electronic

Review by Talk Bass.com

Review by Bass Musician Magazine 

Demo by EytschPi42

Thunderstorm Flanger

40 years ago, in a tiny town in Denmark, two brothers planted a sonic seed – and the SCF STEREO CHORUS FLANGER was born!
A chorus pedal so great and so far ahead of its time – that it single-handedly shaped the destiny of TC ELECTRONIC.

In celebration of our 40th anniversary – and to honor this legendary piece of kit – we’ve created a special limited run of the CORONA CHORUS (only 2,000 units), which sees the CORONA take on the sleek, iconic look of the original SCF pedal.

To ensure it doesn’t just look the part, we’ve meticulously recreated the lush, all-enveloping chorus, pitch-mod and flanger tones of the original, now available as TonePrints, ready to beam to your CORONA CHORUS – absolutely free of charge!

Review by

Demo by TC Electronic 

Demo by CS Guitars 

Corona Chorus

Der NS-2 eignet sich hervorragend, um Signal-Rauschen und lästige Brummgeräusche zu eliminieren, wobei der Klangcharakter des originalen Eingangssignals unberührt bleibt. Attack und Hüllkurve des Signals werden in keinster Weise beeinträchtigt, dank eines von BOSS entwickelten, einzigartigen Noise Detection-Schaltkreises, der den Gitarrenklang präzise von sämtlichen Störgeräuschen zu separieren vermag.

The NS-2 Noise Suppressor eliminates unwanted noise and hum without altering an instrument's natural tone. It's the perfect pedal to quiet down any pedalboard or effects setup.

BOSS

Demo by  Charly G.- Sound & Demo

Demo by Riffs, Beards & Gear

Review by Musiker-Board

Review by The Gear Page

Review by reddit /guitarpedals

Review by Pedal Authority

NS-2 Noise Suppressor

PedalSafe Type E1

QuickMount Type E

Pedal-Montageplatte für Standard-Boss-Pedale

Pedal Mounting Plate For Standard Boss Pedals

Schutzabdeckung & RockBoard-Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & RockBoard Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Schutzabdeckung & universelle Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & Universal Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Manual Page

MT-2 Metal Zone

There has been a recent surge of orders for the Dirty Tree due to it gaining some attention from some notable individuals. Once again please be patient as I am getting through the hundreds of orders.

Pepers Pedals

Review by delicious audio 

Demo by Robin Flink 

Demo by Louis Torres 

Demo by Riffs, Beards & Gear 

Dirty Tree Boost

FuzzImp

Shroot II

Alcmene® is a great Klon-style Overdrive pedal that will revolutionize your guitar tone! Alcmene® offers you the same genuine features that made the legendary Klon Centaur famous, and it perfectly captures its core characteristics.

Steel Panther

Review by Delicious-Audio 

Demo by All-Pedal

Demo by Kyle Bull 

ALCEMENE

Airis Effects

Airis Effect Website

HM808

Fortin Amplification

Hexdrive

The MXR Uni-Vibe Chorus/Vibrato delivers the same lush, chewy textures that players have used since the late '60s. Updated with modern gigging players in mind, this effect now it comes in a standard MXR housing—a fraction of the size and weight of the original—with true bypass switching.

With its simple three-knob interface, you can dial in the effect to your taste in short order. First, use the VIBE switch to select either Chorus Mode—dry signal mixed with pitch-shifted signal—or Vibrato Mode—only pitch-shifted signal. Then, use the LEVEL control to set the effect volume, the SPEED control to set the sweep rate, and the DEPTH control to set overall intensity.

Put the MXR Uni-Vibe Chorus/Vibrato on your board and expand your tonal palette.

Demo by jumdunlopusa

M68 Uni-Vibe Chorus/Vibrato [small box]

Das BOSS HM-2 Heavy Metal wurde von 1983 bis 1991 produziert und ist bis heute eine Legende unter den Distortion-Pedalen. Alle Regler auf Anschlag – so entsteht der Signature-Sound, der untrennbar mit dem schwedischen Death Metal verbunden ist. Doch auch in "sanfteren" Einstellungen überzeugt das HM-2 auf unzähligen Mainstream- und Shoegaze-Tracks. Seit Jahren erreichen uns Anfragen von eingefleischten HM-2-Fans – nun ist es endlich soweit: nach drei Jahrzehnten wird der legendäre Bodentreter in einer speziellen Waza Craft-Edition neu aufgelegt. Das HM-2W liefert den authentischen analogen Klang des Originals, erweitert um zahlreiche moderne Funktionen und Details für eine nochmals verbesserte Performance.

Produced from 1983 to 1991, the BOSS HM-2 Heavy Metal is a true legend in the history of distortion pedals. Its signature “chainsaw tone” with all knobs maxed is the defining voice of Swedish death metal, and the slightly milder sides of its personality can be heard on tracks from mainstream to shoegaze. After years of requests from hardcore HM-2 fans, the iconic stomp is now reborn three decades later in a special Waza Craft edition. The HM-2W delivers the authentic analog sound of the original in all its glory, coupled with lots of modern refinements for enhanced performance.

Demo by Guitar Bonedo

Demo by Reverb

Official Website

Review by Premier Guitar

Review by Guitar World

HM-2 Heavy Metal

“Floating above your head, delicate and elusive yet dreamy and sweeping. Always in motion until it dissolves and merges with the all immersive atmosphere around it. Just close your eyes and let the KMA Machines’ CIRRUS Delay and Reverb carry you across the open sky, onto its sonic cloudscapes.”

The CIRRUS Spatial-Temporal Modifier was KMA Machines’ first step into the fully digital realm. But we didn’t just want to do a regular and run-of-the-mill type of product. No, what we came up with is a truly special and versatile, dynamically modulated combined Delay and Reverb pedal that will forever change your perception of time and space.

KMA Machines

Review by Sound on Sound

Demo by Rabea Massaad

Demo by The Pedal Zone

Cirrus

The Zuul®+ takes everything that made the original Zuul® legendary and adds multiple new, essential, features. The first thing we wanted to do was expand the ‘Key In’ functionality (that makes the gate active after OD/Boost pedals, reacting to the pure guitar signal), Zuul®+ now boasts a ‘Key Thru’ (complete with ground lift switch), that eliminates the need to split the signal externally. We have also added all new Hold and Release controls that give you everything you need to ensure you have pristine gating response in your rig.

Demo by Professor Killertone

ZUUL+

KORG

Website 

Pitchblack

Tommy BOUCHEROT

Morley

George Lynch Dragon 2 Wah

Der DigiTech Whammy bietet Ihnen dieselben haarsträubenden „Dive Bomb“-Effekte, packenden Pitch Bends und blitzschnellen Harmoniewechseln, die Sie suchen, sowie einige neue Überraschungen. Verändern Sie ganze Akkorde mit der neuen Einstellung für die Tonhöhenverschiebung von Akkorden und führen Sie klassische Single-Note-Bends aus.

The DigiTech Whammy brings you the same hair-raising “dive bomb” effects, gripping pitch bends and lightning harmony shifts you are looking for plus a few new twists. Bend entire chords with the new chordal pitch shifting setting, and execute classic single note bends.

DigiTech

Review by HORN FX

Review by musicradar

Demo by S19NAL C14AIN

Demo by Leduc's Own Music Shop

Sweetwater Exclusive Product Page

Whammy V

Für 10-20 FX-Pedale, 2 MOD-Slots - **828 x 330 mm / 32.60" x 12.99"** - erhältlich mit Gig Bag oder Flight Case

For 10 - 20 FX pedals, 2 MOD slots - **828 x 330 mm / 32.60" x 12.99"** - available with Gig Bag or Flight Case

Geoffrey Duffield

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 3 V2 ist eine Patchbay für Sänger und Akustik-Musiker. Über die zwei XLR-Ausgänge kannst du ein Stereo-Signal von dein MOD senden und an den XLR-Eingang lässt sich ein Mikrofon anschließen. Mit drei TRS-Through-Verbindungen lässt sich das MOD 3 V2 außerdem als zentraler Zugang und Ausgang des Boards nutzen um zum Beispiel Effektpedale in den FX-Loop eines Verstärkers einzuschleifen.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 3 x 6,3 mm TRS thru
- 2 x XLR thru (männlich vorne / weiblich hinten)
- 1 x XLR thru (weiblich vorne / männlich hinten)
- 1 x DC 2,1 x 5,5 mm Hohlstecker thru
- 1 x AC IEC thru (männlich vorne / weiblich hinten)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel


The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 3 V2 is a pass-thru box designed for use by vocalists and acoustic players. The 2x XLR outputs allow you to send a stereo signal from your MOD and the 1x XLR input can be used to connect your microphone. You can also use it to run several pedals from your board through the effects loop of your amp, or simply use the MOD as a central access point to your pedalboard.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 3 x 6,3 mm / ¼" TRS thru
- 2 x XLR thru (male front / female back)
- 1 x XLR thru (female front / male back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR Patchbay for Vocalists & Acoustic Players

Sandbox Pedal Board

Demo by PMTV UK

Review by Sound Crunch

RC-5 Loop Station

Der DD-8 ist das vielseitigste und funktionsreichste Delay-Pedal der BOSS-Compact-Serie. Dieses leistungsstarke Pedal bietet mehr von allem – mehr großartige Sounds, mehr Delay-Zeit, mehr Steuerungsoptionen und mehr Anschlussmöglichkeiten. Und das alles in einem klassischen BOSS-Gehäuse, das sich problemlos in jedes Mono- oder Stereo-Setup einfügt. Elf Modi bieten Delays von klassisch bis exotisch sowie einen Looper mit unbegrenzter Overdub-Funktion und Unterstützung für externe Steuerung. Für maximale Vielseitigkeit auf kleinstem Raum gibt es kein besseres Delay-Pedal als den DD-8.

Introducing the DD-8, the most wide-ranging and feature-rich BOSS compact series delay ever. This loaded pedal delivers more of everything—more great sounds, more delay time, more control options, and more connectivity. And it does it all in a standard BOSS pedal that slides easily into any mono or stereo setup. Eleven modes provide delay colors from basic to exotic, plus a looper with unlimited overdub capability and external control support. For maximum versatility in a minimum amount of space, there’s no better delay stomp than the DD-8.

Review by Equip Board

Review by TonePedia

DD-8 Digital Delay

Electro-Harmonix

Signal Pad

PedalSafe Type A1.1

QuickMount Type A

Pedal-Montageplatte für Standard-Einzelpedale

Pedal Mounting Plate For Standard Single Pedals

Schutzabdeckung & RockBoard-Montageplatte für MXR® Standardgröße und Dunlop® Echoplex Delay Pedale

Protective Cover & RockBoard Mounting Plate For MXR® standard size and Dunlop® Echoplex Delay pedals

Schutzabdeckung & universelle Montageplatte für MXR® Standardgröße und Dunlop® Echoplex Delay Pedale

Protective Cover & Universal Mounting Plate For MXR® standard size and Dunlop® Echoplex Delay pedals

Antony Douch

FS-7

Chris Killick-Moran

There is one main control on this pedal,   BOOST,   which goes from 0dB boost to 27dB boost. We added a CONTOUR switch, so the boost signal can be full range, or with a slight bass cut at around 160Hz. We use a similar technology to that used in class G power amps inside this beast so we can get the massive clean output we wanted.

We included an always on “full range” buffer so if the pedal is used at the end of the pedal board, we can drive long cables back to an amp without loss of tone, or if the pedal is used at the start of the pedal board, it will buffer the guitar so as to maintain high impedance loading on the guitar to avoid loss of tone.

Mozztronics

Demo by  TheSuperFunAwesomeHappyTimePedalShow

BB-1 Big Boost

Gilles Peynet

LS-2

RC-3 Loop Station

Der Pulp N Peel V4 ist das Resultat von über 6 Jahren Basteln, Lernen und Experimentieren. Sein Vorgänger wurde zum Kompressor der Wahl für Player auf der ganzen Welt und hat sich seinen Ruf der Kompressor für Leute die Kompression nicht mögen zu sein eindeutig verdient. In der Version 4 bleibt JHS den Dingen die den Pulp N Peel so einzigartig und herausragend gegenüber der Konkurrenz machen treu und fügt einige neue Features hinzu, um die Fähigkeiten dieses Schaltkreises auf ganz neues Territorium heben. Hierzu zählen ein weicherer Sound mit mehr Sustain, mehr Headroom, ein eingebauter paralleler Overdrive Schaltkreis, ein Tone Regler und ein paralleler DI Ausgang. Die Idee war, einen Kompressor zu schaffen den du nie wieder ausschalten möchtest, der dir kein Attack klaut und einen extrem niedrigen Noise Floor hat und jedem Akkord, jede Melodie und jede einzelne Note mit studioartigem Glanz versieht.

The Pulp N Peel V4 is the result of over six years of tweaking, learning, and experimenting. The Pulp N Peel V3 has become a staple on thousands of players' boards all over the world and has gained a reputation for being the compression pedal for players who don't like compression. In version 4 JHS have stayed true to the things that made the PnP stand out among its competition while adding several new features that expand the circuit’s ability to reach into new territory, new tones and new ways of thinking about a compression pedal. These features include an improved detection circuit for smoother and more sustained tones, more headroom, a built in parallel overdrive-drive circuit, a tone control, and parallel 1/4" and DI outputs. The idea behind the Pulp N Peel is to have a compressor pedal that you never want to turn off, that doesn't rob your attack, that has a very low noise floor, and that adds a professional polish to every chord, lead line, and note that blooms out of your guitar.

Official Product Page

JHS Pulp N Peel V4 - Livingroom Gear Demo

JHS Pedals, VCR (Featuring the Pulp'N'Peel, Milkman, Colour Box 500)- Official Bass Demo

Pulp 'N' Peel V4

PedalSafe Type B1

QuickMount Type B1

Pedal-Montageplatte für FRIEDMAN, KEELEY Halo, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD, Jupiter V2 und Mooer GL 100 Pedale

Pedal Mounting Plate for FRIEDMAN, KEELEY Halo, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD, Jupiter V2 and Mooer GL 100 pedals

Schutzabdeckung & RockBoard-Montageplatte für FRIEDMAN, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD & Jupiter V2 Pedale

Protective Cover & RockBoard Mounting Plate For FRIEDMAN, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD & Jupiter V2 pedals

Schutzabdeckung & universelle Montageplatte für FRIEDMAN, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD & Jupiter V2 Pedale

Protective Cover & Universal Mounting Plate For FRIEDMAN, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD & Jupiter V2 pedals

Featuring the largest tuning display Peterson Tuners has ever incorporated into one of their pedal tuners, the StroboStomp HD boasts a high-definition, LCD screen that incorporates a variable color LED backlight. The user-selectable colors can be used to personalize the tuner or to increase display viewing quality in different levels of ambient lighting depending on the usage environment. The vibrant screen colors can also be assigned to stock or user presets to significantly reduce menu navigation time and increase on-stage tuning confidence at the gig.

Peterson

Review by Gitarre & Bass

Demo by The Time Preservation Society

Demo by TalkingBass

Review by The Gear PAge

Review by TDPRI

StroboStomp HD

Simon Katz

The BC-24V-USA runs internally at 24 volts from a standard 9 volt supply. The increased voltage gives extra headroom and a tighter low end – fantastic if you are looking for a little less saturation and grit, but without losing that unique sound of the Broadcast.
The Broadcast is a transformer-coupled, discrete Class-A germanium circuit, that takes its inspiration from classic recording consoles of the 1960s. The unique way in which the circuit saturates and colours your signal can be used to produce biting clean boosts, subtly coloured and thickened signals with a frayed-at-the-edge quality or – when pushed – an individual sounding overdrive with a fuzzy, fried  texture.

Hudson Electronics

Review by the Fretboard

Demo by Aaron Sternke

Demo by Pedal Empire

Broadcast 24v

Der Gemini Chorus aus der One Series ist ein State-of-the-Art Stereo Chorus. Verpackt in einem kleinen pedalboard-freundlichen Gehäuse birgt es eine unglaubliche Flut an hypnotischen, sanften, Wellen an Chorus. Drei, über Kippschalter abrufbare Modi machen den Gemini bereits werksseitig zu einem enorm vielseitigen Chorus Pedal mit allen Regelmöglichkeiten, die man von derlei Effekten gewohnt ist. Verbunden mit dem Smartphone macht die Source Audio Neuro App jedoch noch eine Vielzahl an weiteren Möglichkeiten zugänglich. Hier hat der gewiefte Nutzer auch Zugriff auf eine ständig wachsende Bibliothek an Modulations Algorithmen. Hierzu gehören nicht nur Chorus Effekte, sondern auch Phaser und Flanger.

The One Series Gemini Chorus is a state-of-the-art stereo Chorus. Cramped into a pedal board friendly housing one finds an incredible flood of hypnotic, smooth waves of choral sounds. Three modes, selectable via toggle switch make the Gemini a very versatile Chorus pedal right out of the box. All the controls one is used to are there. Connected with a smartphone, however, the Neuro App makes a lot more parameters accessible. Here the smart user also gets access to a vast and ever-growing library of modulation algorithms, amongst which there are also Phasers and Flangers.

Source Audio

Source Audio SA 242 Gemini Chorus - Official Demo

Source Audio SA 242 Gemini Chorus - Review by Bonedo

Source Audio SA 242 Gemini Chorus - Review by Gitarre&Bass

Source Audio SA 242 Gemini Chorus - Review by Muzikus

Gemini Chorus

QuickMount Type SR1

Pedal-Montageplatte für SOURCE AUDIO AfterShock, Vertigo, TrueSpring Reverb, Gemini Chorus, C4 Synth & EQ Pedale

Pedal Mounting Plates for SOURCE AUDIO AfterShock, Vertigo, TrueSpring Reverb, Gemini Chorus, C4 Synth & EQ pedals

steve hodgson

Es gibt einige hochgeschätzte Kompressoren in Studios, oft alte Röhrengeräte mit optischem Element, die leicht einzustellen waren und immer gut klangen. Mozztronics wollte das Wesentliche dieser alten Vakuumröhrenkompressoren in einem Transistor‑Schaltkreis einfangen. Der Kompressor eignet sich sowohl für Gitarre als auch Bass und bietet umfangreiche Bedienelemente sowie einen RANGE‑Schalter und einen DYNamics‑Regler für vielseitigen Einsatz.

There are a few revered compressors used in studios. Many of these are the old valve (vacuum tube) units that used an optical element for the compression. These compressors were easy to dial in, and no matter what setting you put the controls at, they never sounded bad. Mozztronics set out to capture the essence of these old vacuum tube compressors in a solid‑state circuit. The compressor is useful for both guitar and bass and includes a full range of controls along with a RANGE switch and DYNamics control for versatility. 