Ryan James

This board is built for Shiloh Church based in Bahrain, I wanted something simple yet powerful enough to bring it to the studio for tracking. Choosing the DSM Humboldt Bass Master really helps with routing option, further adding the MOD 1 Patchbay lets me send in 3 signals, clean, dirty and overall effected that will be super helpful in a studio situation.

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 1 V2 ist eine Pass-Through-Box, die speziell für Gitarristen und Bassisten entwickelt wurde. Du kannst das MOD 1 V2 nutzen um mehrere Pedale deines Setups im Front End und im Effekt-Loop des Verstärkers zu postieren (4-Kabel Methode) oder die vier TRS-Anschlüsse als zentralen Zugang und Ausgang des Boards nutzen. Die XLR-Through-Verbindung kann als Signalausgang vom Pedalboard zum Mischpult oder zur PA verwendet werden.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 5 x 6,3 mm TRS thru
- 1 x XLR thru (männlich vorne / weiblich hinten)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 5 x 6,3 mm / ¼" TRS thru
- 1 x XLR thru (male front / female back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR, IEC & Barrel Patchbay

Bass Pedalboard for Shiloh Church

Tester

When it was introduced in 2010, the original POLYTUNE forever revolutionized the way musicians tune their instruments. Praised by professional and amateur players, guitar tuning instantly became as simple as Strum - Tune - Rock! So how do you make the best-selling polyphonic tuner even better? You take it to the next level by: providing multiple tuning modes, including polyphonic, chromatic, strobe and a variety of altered tunings; adding an onboard BONAFIDE BUFFER to preserve your tone over long cable runs and pedal board signal paths; and upgrading the LED display for even higher tuning accuracy. Say hello to your next tuner – POLYTUNE 3.

TC Electronic

Product Page

Review by Charleston Classical Guitar

Review by musicradar

Manual

Demo by American Musical Supply

Demo by Addicted to Gear

Demo by realbeal

Polytune 3

PedalSafe Type G

QuickMount Type G 

Pedal-Montageplatte für Standard TC Electronic Pedale

Pedal Mounting Plate For Standard TC Electronic Pedals

Schutzabdeckung & RockBoard Montageplatte für Standard TC Electronic Pedale

Protective Cover & RockBoard Mounting Plate For Standard TC Electronic Pedals

Schutzabdeckung & universelle Montageplatte für Standard TC Electronic Pedale

Protective Cover & Universal Mounting Plate For Standard TC Electronic Pedals

Louis Sommer

The RNDI-M brings the stunning tone & clarity of its award-winning counterparts to an even more compact and pedalboard-friendly format, with the exact same custom Rupert Neve Designs transformers and discrete FET input stage as the best-selling RNDI, RNDI-S and RNDI-8. 

By streamlining its feature set and housing the electronics in a rugged & more compact chassis, the RNDI-M fits neatly into any space and will allow even more musicians and engineers to tap into the uncompromised sonic power & vibrancy of a Rupert Neve Designs DI.

Rupert Neve Designs

RNDI-M

Jeffrey Wang

High-quality, high current buffer/signal splitter for use in multiple scenarios.  It is powered by normal (Boss-style) pedalboard-friendly 9Vdc from any supply (no special adapters needed).  The jacks are oriented specifically to integrate with your other pedals (fits easily on your board).  Uses a genuine Jensen Transformer for the cleanest, clearest signal and the greatest noise rejection.

Output 2 can be used as an active DI for recording and allows for balanced connection via TRS or using a TRS to XLR adapter (available separately)

Pinstripe Pedals

Demo by Kenyon Reed

Demo by Sam Wittek

MBFR

David Graves

The Cali76 Bass Compressor is a studio-grade compressor pedal inspired by the world-famous Urei® 1176® studio compressor, heard on many of the greatest studio recordings since the 1960s. The Cali76 Bass Compressor uses uncompromising all-analogue circuitry to make these distinctive, ultra-fast FET compression tones available to the modern guitarist.

The latest in a long lineage of Cali76 compressors, the Cali76 Bass Compressor features a full set of studio-style controls, a DRY knob for parallel compression and an improved sidechain that matches the response of our sought-after “large format” Cali76 – the pedal that put Origin Effects on the map back in 2012.

With a 10-LED gain reduction meter, a pedalboard friendly enclosure and massive headroom thanks to internally increased voltage, the Cali76 Bass Compressor marks the culmination of over a decade of experience making the world’s finest compressor pedals.

Origin Effects

Demo by  BassTheWorld.com

Official Product Video

Review by Compressor Pedal Reviews

Review by reddit /basspedals

Review by Gearnews

Review by AMAZONA

Manual download

Cali76 Bass Compressor (Classic)

James Morse

The greatest pieces of studio gear are the ones that add something special to the sound of an instrument, going beyond the job they were designed for and enhancing anything that passes through the circuit. One such piece is the UA 610 preamp, which was the inspiration for the DCX Boost. This retro console preamp is famous for adding vintage, analogue colour to a signal, as well as precise control of level and EQ. Push the level harder and you get rich, harmonic saturation of the kind that makes analogue hardware a must-have in any present-day studio.

The DCX Boost reimagines this classic preamp as a tone-shaper and drive pedal for guitar, with a wide range of clean and overdrive tones, EQ frequencies optimised for the instrument, and our Adaptive Circuitry providing a treble response that reacts to playing dynamics. It’s a signal-boosting, tone-enhancing pedal straight from the studio!

Review by bonedo

Review by Guitar World

Demo by AndyDemos 

Demo by Peach Guitars

Demo by Pete Thorn

DCX BOOST

ch ray

Ein super vielseitiger Vorverstärker mit 3 Modi (Clean, Comp und Hot), einem parallelen Signalmix mit Tiefpassfilteroptionen zur Verbesserung des Bassgefühls

Der Bass Master ist das Vorgängermodell unserer hochgeschätzten Bass Station und bietet verbesserte Vielseitigkeit sowie einen praktischeren und geradlinigeren Ansatz.
Ein super vielseitiger Vorverstärker mit 3 Modi (Clean, Comp und Hot), einem parallelen Signalmix mit Tiefpassfilteroptionen zur Verbesserung des Bassgefühls und der Bassreaktion sowie einem 4-Band-Equalizer machen ihn zu einem extrem vielseitigen und leistungsfähigen Tool, das Töne erzeugt, von denen andere Bassvorverstärker nur träumen können.

A super versatile preamp with 3 modes (Clean, Comp,
and Hot), a parallel signal mix with low pass filter
options for improving the low end feel 

The Bass Master precedes our revered Bass Station,
packing improved versatility, and a more practical and
straight forward approach.
A super versatile preamp with 3 modes (Clean, Comp,
and Hot), a parallel signal mix with low pass filter
options for improving the low end feel and response,
and a 4-band equalizer makes it an extremely versatile
and capable tool, getting tones other bass preamps
would dream of.

DSM & Humboldt

Simplifier Bass Master

Born in the heart of NYC and raised on the road, the Tone Hammer Preamp DI has been an indispensable tool for bassists seeking inspiring tone and versatility. With its warm, rich, and dynamic sound, the Tone Hammer Preamp is an essential preamp/direct box for every bassist. The Tone Hammer features fully sweepable midrange frequencies, in addition to bass and treble controls. With the Tone Hammer’s pristine D.I., players are set for either studio or stage. Enhanced for even greater flexibility, the updated Drive circuit now provides an expanded range, allowing for increased gain and a dedicated control to finely tune your sound. You can go from modern slap sounds to vintage or overdriven, and everything in between. 18-volt operation gives the Tone Hammer plenty of headroom, and we’ve added a Headphone Out and Aux In, making it the perfect practice companion, whether on the road or at home.

Aguilar

Demo by Nate Navarro

Review by algam Benelux

Review by Talk Bass.com

Tone Hammer Preamp v2

Truetone

1 Spot Pro CS6

Für 5-10 FX-Pedale, 1 MOD-Slot - **442 x 236 mm / 17.40" x 9.29"** - erhältlich mit Gig Bag oder Flight Case

For 5 - 10 FX pedals, 1 MOD slot - **442 x 236 mm / 17.40" x 9.29"** - available with Gig Bag or Flight Case

Yosua Putra

GP200-LT Bass Hybrid

Featuring the largest tuning display Peterson Tuners has ever incorporated into one of their pedal tuners, the StroboStomp HD boasts a high-definition, LCD screen that incorporates a variable color LED backlight. The user-selectable colors can be used to personalize the tuner or to increase display viewing quality in different levels of ambient lighting depending on the usage environment. The vibrant screen colors can also be assigned to stock or user presets to significantly reduce menu navigation time and increase on-stage tuning confidence at the gig.

Peterson

Review by Gitarre & Bass

Demo by The Time Preservation Society

Demo by EytschPi42

Demo by TalkingBass

Review by The Gear PAge

Review by TDPRI

Review by reddit /guitarpedals

StroboStomp HD

Teeratai Kaewmanee

The greatest pieces of studio gear studio gear are the ones that add something special to the sound of an instrument, going beyond the job they were designed for and enhancing anything that passes through the circuit. One such piece is the UA 610 preamp, which was the inspiration for the DCX Bass. This retro console preamp is famous for adding vintage, analogue colour to a signal, as well as precise control of level and EQ. Push the level harder and you get rich, harmonic saturation of the kind that makes analogue hardware a must-have in any present-day studio.

The DCX Bass reimagines this classic preamp as a tone-shaper and drive pedal for bass guitar, with a wide range of clean and overdrive tones, EQ frequencies optimised for the instrument, and our Adaptive Circuitry providing a treble response that reacts to playing dynamics. It’s a signal-boosting, tone-enhancing pedal straight from the studio!

Sound Samples w/ Ian Martin Allison

DCX BASS

QuickMount Type B

Pedal-Montageplatte für Standard-Einzelpedale

Pedal Mounting Plate For Standard Single Pedals

Oscar Kezirian

Altoids

Altoids Smalls

Das Wave Audio LI-22 ist ein passiver, zweikanaliger oder Stereo-Line-Isolator. Es wurde entwickelt, um wie eine DI-Box zu funktionieren, behält aber einen Line-Pegel-Ausgang bei, was es ideal für die Anbindung an Amp-Modeler und andere Geräte mit einem heißen Signalausgang macht. Das Gerät bietet einen gleichmäßigen Frequenzgang von 20 Hz bis 20 kHz, wandelt ein unsymmetrisches 1/4-Zoll-Eingangssignal in einen symmetrischen XLR-Ausgang um und verfügt über eine "Sum"-Taste zum Zusammenführen von Stereo-Signalen zu Mono. Es verwendet hochwertige Transformatoren und vergoldete Anschlüsse für eine optimale Audioleistung.

The Wave Audio LI-22 is a passive, two-channel, or stereo line isolator. It is designed to act like a direct box but maintains a line-level output, making it ideal for interfacing with amp modelers and other devices that have a hot signal output. The unit features a uniform frequency response from 20Hz-20kHz, converts an unbalanced 1/4" input signal to a balanced XLR output, and includes a "sum" button for merging stereo signals to mono. It uses high-quality transformers and gold-plated connectors for optimal audio performance.

Wave Audio

Demo by Triple 3 Music TV

LI-22 Passive Line Isolator

Das SCI Pedals Digital Enhancer ist ein Pedal, das zur Verbesserung des Signals bei der Verwendung eines digitalen Multi-Effekt-Prozessors entwickelt wurde. Es verwendet FET-Komponenten, um das Signal zu manipulieren und die Stärke und den Frequenzgang von analogem Equipment nachzuahmen, um den "sandigen" Klang zu eliminieren, der oft mit digitalen Einheiten verbunden ist. Das Pedal ist immer aktiv und verbessert den Klang und das Spielgefühl des Instruments, auch wenn der Regler auf Null steht. Es funktioniert sowohl für Gitarre und Bass als auch mit Plugins.

The SCI Pedals Digital Enhancer is a pedal designed to improve the signal when using a digital multi-effects processor. It uses FET components to manipulate the signal, mimicking the strength and frequency response of analog gear to eliminate the "sandy" sound often associated with digital units. The pedal is always active and enhances the sound and feel of the instrument, even when the knob is set to zero. It works for both guitar and bass, as well as with plugins.

Digital Enhancer

David Litaba

Carrying on the POLYTUNE legacy, POLYTUNE 3 MINI packs an unprecedented amount of tuning power into a tiny footprint without sacrificing essential features, such as always-on mode and our audiophile BONAFIDE BUFFER circuit for uncompromised tones – making it ideal for fully-loaded pedal boards where every inch counts!

Review by AMAZONA 

Review by GUITAR World 

Review by bonedo 

Demo by TC Electronic 

Demo by Guitar World 

Polytune 3 Mini

QuickMount Type L

Pedal-Montageplatte für Standard-Mini-Pedale

Pedal Mounting Plate For Standard Mini Pedals

Der EHX Bass Micro Synthesizer ist ein reiner Bassgitarren-Synthesizer mit vollständig analoger Schaltung. Einstellbare Synthesizer-Parameter erzeugen satte, kraftvolle Klänge aus einer anderen Welt.  

Die Voice-Mix-Sektion ermöglicht die Mischung aus vier verschiedenen Stimmen: Sub-Octave, Guitar, Octave und Square Wave. Besonders die Square Wave sorgt für den charakteristischen, fuzzigen Klang des Bass Micro Synthesizers, der an den kosmischen Sound der 70er Jahre erinnert.  

Mit der Attack-Decay-Steuerung lassen sich gestrichene Effekte oder bedrohliche Lautstärkeschwankungen erzeugen, während die Filter-Sweep-Sektion das gesamte Frequenzspektrum durchläuft – von schnellen, präzisen Schnitten von Hoch nach Tief bis hin zu langsamen, fließenden Anstiegen von Tief nach Hoch.

The EHX Bass Micro Synthesizer is a pure bass guitar synthesizer with all analog circuitry. Adjustable synth parameters deliver fat, sweet tones from another world.

Its voice mix section lets you bring in 4 different voices: Sub Octave, Guitar, Octave, and Square Wave. The Square Wave gives the Bass Micro Snythesizer its signature, fuzzy growl that calls back to the cosmic ’70s .

An Attack Decay control creates bowed effects or ominous volume swells while the Filter Sweep section sweeps through the full frequency spectrum for sound from quick high to low chops and slow low to high blooms.

Electro-Harmonix

Review by Pedals & Effects

Review by Bass Gear Reviews

Demo by Bassic Gear Reviews

Bass Micro Synth

PedalSafe Type O

QuickMount Type O

Pedal-Montageplatte für FRIEDMAN Overdrive Deluxe & WALRUS Descent Pedale

Pedal Mounting Plates for FRIEDMAN Overdrive Deluxe & WALRUS Descent pedals

Schutzabdeckung & RockBoard-Montageplatte für FRIEDMAN Overdrive Deluxe & WALRUS Descent Pedale

Protective Cover & RockBoard Mounting Plate For FRIEDMAN Overdrive Deluxe & WALRUS Descent pedals

Schutzabdeckung & universelle Montageplatte für FRIEDMAN Overdrive Deluxe & WALRUS Descent Pedale

Protective Cover & Universal Mounting Plate For FRIEDMAN Overdrive Deluxe & WALRUS Descent pedals

Das Vitoos DD8-SV2 ist ein vollständig isoliertes Netzteil für Effektpedale. Es verfügt über acht isolierte Ausgänge, von denen sechs auf 9V/500mA festgelegt sind und zwei einstellbare Ausgänge bei 9V, 12V oder 18V mit einer maximalen Stromaufnahme von 500mA pro Ausgang. Das Gerät wurde entwickelt, um eine stabile und rauschfreie Leistung zu bieten, mit einer Foldback Current Limiting Circuit (FCLC) zum Schutz vor Stromausfällen und Überlastungen. Es ist Teil der Serie "Power Your Music" und verfügt über eine fortschrittliche LED-Überwachung.

 The Vitoos DD8-SV2 is a fully isolated power supply for effect pedals. It features eight isolated outputs, with six fixed at 9V/500mA and two adjustable outputs at 9V, 12V, or 18V with a 500mA maximum current draw per output. The unit is designed to provide stable and noise-free performance with a Foldback Current Limiting Circuit (FCLC) for protection against power shortages and overloads. It is part of the "Power Your Music" series and includes advanced LED monitoring.

Vitoos

DD8-SV2

Lee Atkin

Entwickelt in Zusammenarbeit mit Bass-Professor und Klangkenner Ian Martin Allison ist der MXR Bass Synth ein Kraftpaket unter den Pedalen, das donnernde Sub-Oktaven, expressive Hüllkurven und üppige Modulationseffekte mit erstklassigem Tracking und Sustain bietet – dazu alle Funktionen, die Sie benötigen, um jeden einzelnen Aspekt Ihres Klangs zu formen.

Designed with low-end professor and tone connoisseur Ian Martin Allison, the MXR Bass Synth is a powerhouse of a pedal offers thunderous sub-octave, expressive envelope, and lush modulation effects with killer tracking and sustain—plus all the features you need to shape every detail of your tone.

Review by No Treble

Review by Gear News

Bass Synth MB301

Felix Veas

■ Portable midi pedal, small and exquisite.
■ Charging for 2.5 hours,can be used for 12 hours. 
■ The display screen can directly feedback the commands you issued , intuitive and clear.
■ WINDOWS, MAC, IOS, ANDROID and other platforms are all compatible.
■The built-in host interface allows for direct control of the effector
■Advanced customization mode with switchable bank
■Customization of keyboard combination keys

M-VAVE

Review by The Gear Page

Chocolate Plus

Jurger Montes

The Minnow is a high quality, low noise bass preamp DI pedal equipped with our Bullhead EQ section. This single channel Bullhead preamp features shelving EQ’s for the BASS and TREBLE controls and variable band pass EQ’s for the LO MID and HI MID. A selectable mid frequency for both LO MID and HI MID controls provide complete control over the midrange. We’ve also added HI SHIFT to the treble frequency to further tune the cut/boost capability of the treble control. In addition, the Minnow preamp includes a tuner out for silent tuning and a balanced XLR output for use as a DI, great for both live and studio use.

TrickFish

Review by Bass Magazine

Demo by Fat Bass Tone

Minnow

Angelo Paddeu

Valeton GP-200LT is the LITE version of the GP-200. With its compact size and portable design, this burden lifter allows you to pick out your favourite sound and clear out just enough physical space, making it easy to fit into any pedalboard and helping you mix and match with any setup you prefer.

Valeton

Demo by Chilled Guitar Reviews

GP-200LT

Für 7-12 FX-Pedale, 1 MOD-Slot - **598 x 236 mm / 23.54" x 9.29"** - erhältlich mit Gig Bag oder Flight Case

For 7 - 12 FX pedals, 1 MOD slot - **598 x 236 mm / 23.54" x 9.29"** - available with Gig Bag or Flight Case

sejun williams

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 3 V2 ist eine Patchbay für Sänger und Akustik-Musiker. Über die zwei XLR-Ausgänge kannst du ein Stereo-Signal von dein MOD senden und an den XLR-Eingang lässt sich ein Mikrofon anschließen. Mit drei TRS-Through-Verbindungen lässt sich das MOD 3 V2 außerdem als zentraler Zugang und Ausgang des Boards nutzen um zum Beispiel Effektpedale in den FX-Loop eines Verstärkers einzuschleifen.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 3 x 6,3 mm TRS thru
- 2 x XLR thru (männlich vorne / weiblich hinten)
- 1 x XLR thru (weiblich vorne / männlich hinten)
- 1 x DC 2,1 x 5,5 mm Hohlstecker thru
- 1 x AC IEC thru (männlich vorne / weiblich hinten)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel


The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 3 V2 is a pass-thru box designed for use by vocalists and acoustic players. The 2x XLR outputs allow you to send a stereo signal from your MOD and the 1x XLR input can be used to connect your microphone. You can also use it to run several pedals from your board through the effects loop of your amp, or simply use the MOD as a central access point to your pedalboard.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 3 x 6,3 mm / ¼" TRS thru
- 2 x XLR thru (male front / female back)
- 1 x XLR thru (female front / male back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR Patchbay for Vocalists & Acoustic Players

Seattle

Louis Springer

LOOP SWITCHING MADE SIMPLE
The ML5 lets you to use your MIDI controller to control your non-MIDI pedals, giving you simultaneous control of both your digital and analog effects.

Easily select which of your non-MIDI pedals are included or excluded from each of your MIDI presets and recall loop combinations with the touch of a switch.

Morningstar Engineering

Demo by BugBryan

William Heryett

Unknown

Dirty Riffs Pick Tin

Elod Bajrami

Roberto Gonzalez Lozano

2-Channel Line Isolation Box for DSP Guitar rigs or Percussion pads with XLR Polarity Reverse switch and Summing on 1/4″ & XLR outs.

Demo by Worship Gear Collective

DISO+ DLX

W Js

The Cali76 FET Compressor is a studio-grade compressor pedal inspired by the world-famous Urei® 1176® studio compressor, heard on many of the greatest studio recordings since the 1960s. The Cali76 FET Compressor uses uncompromising all-analogue circuitry to make these distinctive, ultra-fast FET compression tones available to the modern guitarist.

Review by OVNI LABS

Review by That Guitar Lover

Demo by Superdanger Studios

Cali76 FET Compressor (Black)

Anfang 1984 veröffentlichte BOSS zwei seltsame neue Geräte unter dem Namen "The Pocket Series". Eines dieser Geräte war der FA-1 FET Preamp, der schnell seinen rechtmäßigen Platz unter den Klanglegenden fand, als The Edge of U2 ihn bei der Aufnahme von "Unforgettable Fire" verwendete und ihn in seine nachfolgenden Touring-Rigs stellte. Der Clover Preamp / Boost ist eine JHS Interpretation des FA-1, jedoch mit einigen zusätzlichen Funktionen, die diese erstaunliche Schaltung noch besser machen. Du wirst bei deinen Gigs  nicht auf diesen glücklichen Tonformer verzichten wollen! Der Clover ist eine End-All-Preamp / Boost für akustische und E-Gitarren und Bässe. Der EQ ist einfach, kraftvoll und lässt keinen schlechten Klang zu. Während der Clover sich als Vorstufe / Boost für Dirt-Pedale auszeichnet, liegt sein Zauber darin, deinen Tube-Amp in den natürlichen Overdrive zu treiben. Mit dem EQ kannst du deinen persönlichen Sweet Spot einstellen, an dem dein Verstärker nachgibt. Schiebe deinen kleinen Low-Watt Amp in natürlichen Overdrive und Distortion oder finde Sounds in stärkeren Amps, die du noch nie gehört hast. Strat- und Tele-Spieler können mit dem Clover mehr Schlagkraft, Tiefe und Dynamik erreichen, wie sie mit Single Coil Pickups normalerweise nicht möglich sind, während Les Pauls und Humbucker Klarheit, Biss und Definition in Hülle und Fülle erlangen! Von Country, Rock, Metal bis hin zu Akustik… Der Clover deckt alles  ab. Finde deinen unvergesslichen Tone mit dem Glück des Klees!

In early 1984 BOSS released two strange new devices under the name "The Pocket Series". One of those devices was the FA-1 FET Preamp and it quickly found its rightful place among the legends of tone when The Edge of U2 used it on the recording of "Unforgettable Fire" as well as placing it in his following touring rigs. The Clover Preamp/Boost is JHS' faithful interpretation of the FA-1 but with several additional features that they believe make this amazing circuit even better. You won't want to be without your lucky tone-shaper at any gig! The Clover is an end all preamplifier / boost circuit for any electric, acoustic, or bass player. The EQ is simple, powerful and doesn't allow a bad sound. While the Clover excels at being a preamp / boost for dirt pedals, the magic is in pushing your tube amplifier into natural overdrive. The EQ lets you hit the exact spot that your amp is naturally prone to give in at. Push your small wattage amp into natural rich overdrive and distortion or find sounds in your larger more powerful wattage amp that you have never heard before. Strat and Tele players can use the Clover to create extra punch, depth and dynamics that single coil pickups can't normally achieve, while Les Paul and humbucker players can find clarity, bite and definition galore! From country, rock, metal and even acoustic… The Clover covers every base. Find your unforgettable tone with the luck of the Clover!

Official Product Page

JHS Clover - Demo by Mike Hermans

JHS Clover - Demo by Living Room Gear Demos

JHS The Clover - Review by Muzikus [CZ], [06-2019]

JHS The Clover - Review by Gitarzysta [PL], [05-2019]

JHS The Clover - Review by Gearphoria [EN], [05-2019]

Clover

PedalSafe Type B1

QuickMount Type B1

Pedal-Montageplatte für FRIEDMAN, KEELEY Halo, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD, Jupiter V2 und Mooer GL 100 Pedale

Pedal Mounting Plate for FRIEDMAN, KEELEY Halo, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD, Jupiter V2 and Mooer GL 100 pedals

Schutzabdeckung & RockBoard-Montageplatte für FRIEDMAN, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD & Jupiter V2 Pedale

Protective Cover & RockBoard Mounting Plate For FRIEDMAN, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD & Jupiter V2 pedals

Schutzabdeckung & universelle Montageplatte für FRIEDMAN, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD & Jupiter V2 Pedale

Protective Cover & Universal Mounting Plate For FRIEDMAN, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD & Jupiter V2 pedals

Franko Teston

TONEX ONE integriert die revolutionäre AI Machine Modeling-Technologie in Pedalboards jeder Größe, sodass Sie auf mehr Arten als je zuvor mit den gefragtesten Sounds der Welt spielen können. Es macht buchstäblich unbegrenzte Töne für jedermann zugänglich.

Das ultrakompakte und leistungsstarke TONEX ONE speichert bis zu 20 hyperrealistisch modellierte Verstärker, Boxen und Pedale aus einer praktisch unbegrenzten Quelle, sodass Sie es überall in Ihrem Rig hinzufügen können. Mit der mitgelieferten TONEX-Software können Sie sogar Modelle Ihrer eigenen erfassten Ausrüstung hochladen. Platzieren Sie mühelos mehrere Einheiten auf Ihrem Board für wirklich unbegrenzte Klangmöglichkeiten.

TONEX ONE puts IK’s revolutionary AI Machine Modeling technology on any size pedalboard, enabling you to perform with the world’s most sought-after tones in more ways than ever before. It truly makes unlimited tone accessible to all.

Ultra-compact and powerful, TONEX ONE stores up to 20 hyper-realistic modeled amps, cabs and stomps from a nearly infinite supply, so you can add it anywhere in your rig. You can even load models of your own gear captured with the included TONEX software. Effortlessly fit multiple units on your board for truly limitless tone possibilities.