호현 양

Sandbox Pedal Board

Tester

Designed as the ultimate tone shaping tool for a player’s pedalboard, the PRISM is a buffer, boost, preamp, EQ and overdrive all in one beautiful and compact stainless steel enclosure!

Jackson Audio

Product Page

Review by Premier Guitar

Review by AMAZONA

Manual

Demo by Jackson Audio Mateus Asato

Demo by Premier Guitar

Official Product Video

Prism

ch ray

Der mxr Micro Amp addiert einen einstellbaren Boost zu dem Gitarrensignal. Er kann verwendet werden um Lead-Passagen anzuheben, um beim Wechsel zwischen zwei Gitarren mit unterschiedlichem Output (Humbucker/Singlecoil) das Signal anzugleichen, oder als permanenter Boost um Signaldegradation in langen Effektketten entgegenzuwirken.

This device adds a preset amount of gain, using a single control. With a guitar, this lets you boost your signal for lead work, adjust between two different guitars with unmatched output (i.e., humbucker to single coils), or it can supply a permanent boost in a long effects chain where signal drop off is a problem. Power: Single 9-volt battery or Dunlop ECB-003 AC Adapter - Controls: Footswitch toggles amp on/bypass (red LED indicates on) Gain knob adjusts total output volume when micro amp Is engaged

Official Product Page

MXR M 133 Micro Amp- Official Demo

MXR M 133 Micro Amp Review Tone Report EN

Review by The Gear Page

Demo by Jack Griffiths

Demo by Takumi Craft

Review by Ultimate Guitar

Review by Musiker-Board

M133 Micro Amp

Badger

Digital Delay/Plate Reverb 2 Effekte in 1 Pedal.

Max. 2000ms Delay Time, Reverb hat große planbare Decay Parameter.

Trail und Tap Tempo Funktion hilft bei einer Live-Show.

Spezielles Design Buffer Bypass Schaltung hält den Sound unverfälscht.

Arbeitet mit 9V Center Negative Regular Pedal Power Supply (nicht enthalten).

Digital Delay/Plate Reverb 2 effects in 1 Pedal.

Max. 2000ms Delay Time, Reverb has large schedulable Decay parameter.

Trail and Tap Tempo function helps during the Live Show.

Special Design Buffer Bypass Circuit Keeps the Sound Pristine.

Working with 9V Center Negative Regular Pedal Power Supply(not included).

Sonicake

Demo by Danny Page

Demo by Budget Pedal Chap

Demo by  intheblues

Review by stompboxsteals.blogspot.com

Review by reddit.com/r/guitarpedals

Review by delicious-audio.com

Levitate

Three spacy, cascading reverb/delay algorithms make for an altogether memorable playing experience in the Matthews Effects Cosmonaut V2 pedal. Both 3-knob rows of this pioneering textural generator give you independent control of your choice of three lush ambiences, which are immediately accessible, without tools or menu diving, via two external slider switches. Effects can be engaged and toggled via two dedicated soft-touch footswitches.

Matthews Effects

Demo by D Man Guitar

The Cosmonaut v2

Review by delicious audio

Review by reddit /guitarpedals

Review by guitar pedal X

Demo by shnobel

Official Website

The Architect v3

The Crazy Tube Circuits Ziggy v2 is a British flavored dual overdrive / distortion designed with discreet MOSFET gain stages to respond like a tube amp with ultra touch sensitivity so that you can control everything from your guitar’s volume knob and pick attack.
  A silent relay true-bypass switching circuit selects between 2 separate overdrive/distortion channels – low and high gain - each with its own controls for ultimate versatility.  Low gain channel is voiced after late 60s Super Bass while high gain channel sounds and responds like a late 70s Master Volume British amp.

Crazy Tube Circuits

Review by TDPRI

Demo by Shawn Tubbs

Demo by intheblues

Ziggy V2

Guillermo Guerrero

14 Jahre lang hat das populäre Boss FV-300 den Standard für Volumen-Pedale definiert. Diese Tradition wurde durch die FV-50-Serie fortgesetzt. Das FV-500H (high-impedance, hochohmiges Volume/Expression-Pedal) und FV-500L (low-impedance, niederohmiges Volume/Expression-Pedal) setzen jetzt noch höhere Maßstäbe. Diese stabilen, stylishen Pedale sind optimal auf die Bedürfnisse der User abgestimmt und absolut road-tauglich. Beide Modelle können als Expression-Pedal zusammen mit entsprechenden Verstärkern, Effektgeräten und Synthesizern genutzt werden.

For 14 years, the famous BOSS FV-300 served as an industry-standard volume pedal. The tradition continued with the FV-50 series, but today the bar has been raised with BOSS’s FV-500H (mono, high-impedance, inst. level) and FV-500L (stereo, low-impedance) pedals. These tank-tough diecast pedals are designed to meet the needs of the most demanding customers. The pedals offer a new stylish design, a road-tough build, and a comfortable, smooth action. Both models also provide an Expression output for use with expression-compatible amps, effects, and even synthesizers.

BOSS

FV-500L

RockBoard

POWER MOD ISO DC 1

Für 5-10 FX-Pedale, 1 MOD-Slot - **442 x 236 mm / 17.40" x 9.29"** - erhältlich mit Gig Bag oder Flight Case

For 5 - 10 FX pedals, 1 MOD slot - **442 x 236 mm / 17.40" x 9.29"** - available with Gig Bag or Flight Case

Simone  Donato

Die RockBoard® MOD 5 Cab SIM + DI Patchbay bietet wählbare, IR-basierte Stereo-Lautsprecher Simulation, eine aktive DI-Box, sowie eine einfache Lösung, um alle Verbindungen zu und von deinem Effekt Setup zu organisieren. Egal, ob du ein RockBoard® oder ein anderes Pedalboard einer anderen Marke verwendest - die MOD 5 eröffnet völlig neue Möglichkeiten. Mit der Speaker-Cab-Simulation und DI kannst du direkt loslegen und hast DEINEN Sound parat, unabhängig davon, welche Backline an der jeweiligen Venue zur Verfügung steht. Du möchtest deine persönliche Lieblings-Cabinet benutzen? Kein Problem, lade eine Impulse Response des Sounds in die MOD 5 und du hast sie überall dabei. Der Patchbay-Teil dient dazu, Verbindungen von unterhalb deines Pedalboards nach vorne zu leiten, um dir einen zentralen Zugangspunkt zu deinem Setup zu geben und deinen Kabelsalat aufzuräumen. Für geräuschloses Üben auf der Straße bietet der MOD 5 auch einen Kopfhörerverstärker mit einstellbarer Ausgangslautstärke.
- Cabinet Simulation & DI Patchbay
- IR basierte Lautsprecher Simulation
- 6 integrierte IRs wählbar
- Unterstützung von zusätzlichen Custom IRs (max. 1024 pts.)
- integrierte aktive DI Box
- Kopfhöhrer Verstärker
- passend für MOD Slots in RockBoard® Pedalboards
- kompatibel mit einer weiten Reihe anderer Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- wählbarer MONO / STEREO Input
- wählbarer UN- / BALANCED Output
- Ground Lift Schalter
- Regler für Phones Volume
- 3 x 6,3 mm TRS Thru
- XLR DI Out
- 6.3 mm Parallel TRS Output
- 3.5 mm Stereo Kopfhöhrer Ausgang mit einstellbarer Lautstärke
- micro USB Anschluss für Firmware Updates und zum Hochladen von Custom IRs
- Stromversorgung via optionalem 9V DC Netzteil, 2.1 x 5.5 mm Hohlstecker, Polarität (-) innen
- Stromaufnahme 300 mA
- Batteriebetrieb nicht unterstützt
- Abmessungen mit Frontplatte (B x T x H) 175 x 85 x 47 mm 
- Abmessungen ohne Frontplatte (B x T x H) 160 x 85 x 33 mm
- Gewicht 470 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The RockBoard® MOD 5 Cab SIM + DI Patchbay offers customizable, IR-based stereo speaker cabinet simulation, an active DI box, as well as a simple solution to organize all the connections to and from your effects setup. Whether you are using a RockBoard® or any other brand pedalboard - the MOD 5 will open completely new possibilities. The speaker cab simulation & DI let's you go direct, providing YOUR sound, whatever backline is being provided at the venue you're playing. Do you want to use your favorite cab? No problem, load an impulse response of its sound into the MOD 5 and you have it with you, wherever you go. The patchbay part is designed to route connections from underneath your pedalboard to its front, in order to give you a central access point to your setup and tidy up your connections. For silent and on the road practicing, the MOD 5 also provides a headphone amplifier with adjustable output volume.
- cabinet simulation & DI patchbay
- IR-based speaker cabinet simulation
- 6 integrated IRs selectable
- support of additional Custom IRs (max. 1024 pts.)
- integrated active DI box
- headphone amplifier
- fits MOD slots in RockBoard® pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- selectable MONO / STEREO input
- selectable UN / BALANCED output
- ground lift switch
- control for Phones Volume
- 3 x 6.3 mm / ¼" TRS thru
- XLR DI Out
- 6.3 mm / ¼" Parallel TRS output
- 3.5 mm / 1/8" stereo headphone output with adjustable volume
- micro USB connection for firmware updates and loading custom IRs
- power supply via optional 9V DC power adapter, 2.1 x 5.5 mm barrel plug, polarity (-) center
- current draw 300 mA
- battery operation not supported
- dimensions with front plate (W x D x H) 175 x 85 x 47 mm / 6 57/64" x 3 11/32" x 1 27/32" 
- dimensions without front plate (W x D x H) 160 x 85 x 33 mm / 6 19/64" x 3 11/32" x 1 19/64"
- weight 470 g / 1.04 lbs.
- incl. mounting screws, counter nuts, and TX wrench

Cab SIM + DI Patchbay

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 1 V2 ist eine Pass-Through-Box, die speziell für Gitarristen und Bassisten entwickelt wurde. Du kannst das MOD 1 V2 nutzen um mehrere Pedale deines Setups im Front End und im Effekt-Loop des Verstärkers zu postieren (4-Kabel Methode) oder die vier TRS-Anschlüsse als zentralen Zugang und Ausgang des Boards nutzen. Die XLR-Through-Verbindung kann als Signalausgang vom Pedalboard zum Mischpult oder zur PA verwendet werden.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 5 x 6,3 mm TRS thru
- 1 x XLR thru (männlich vorne / weiblich hinten)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 5 x 6,3 mm / ¼" TRS thru
- 1 x XLR thru (male front / female back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR, IEC & Barrel Patchbay

Simoboard main amp

MESA EXPRESS 5:25

Nicolas  lopez

Ernie Ball

Volume VP Jr

Der Ego Compressor hat sich zu einem modernen Klassiker entwickelt und ist die erste Wahl für Musiker aller Genres auf der ganzen Welt. Ganz gleich, ob du einen Full-Country-Kompressor, einen Tonfetter, etwas zum Abflachen der Dynamik oder einfach nur eine völlig transparente Anhebung brauchst, der Ego wird dir perfekt passen. 

The Ego Compressor has become a modern classic and has become the first choice for musicians of every genres, all over the world. It doesn’t matter if you need full country squish, a tone fattener, something to level out the dynamics or just a completely transparent boost, the Ego will suit you perfectly. It’s the kind of compressor you don’t realize is on until your tone disappears when it’s turned off.

Wampler

Review by musicradar.com

Review by ovnilab.com

Review by guitartest.de

Review by compressorpedalreviews.com

Quick Start Guide

Demo by Sweetwater

Demo by  The Gear Cage

Ego Compressor

QuickMount Type A

Pedal-Montageplatte für Standard-Einzelpedale

Pedal Mounting Plate For Standard Single Pedals

Das Boss DD-200 ist ein weiteres Digital-Delay des renommierten Herstellers, das der Saitenzunft die Sounds und Funktionen des schon länger erhältlichen DD-500in einem kompakteren Format aufs Pedalboard zaubern soll. Der geschrumpfte Echogenerator aus der neuen 200er Serie, die bisher vier Pedale umfasst, hat schon auf den ersten Blick zahlreiche Funktionen zu bieten, deren Bedienelemente dennoch äußerst übersichtlich angeordnet wurden.

The DD-200 Digital Delay brings together sounds and features inherited from the flagship DD-500 into an even smaller footprint. Twelve different modes offer an inspiring variety of delay colors from modern digital to classic analog, letting you dial up everything from basic echoes to rich ambient pads and everything in-between. There’s also a looper that’s always ready to use, plus a selectable carryover function for seamless transitions between memories.

Review by MusicRadar, musicradar.com

Review by Dimitri, amazona.de

Review by Michael Behm, bonedo.de

DD-200 Digital Delay

Mit der 200-Serie präsentiert BOSS eine neue Pedal-Generation, die mit hochwertigem Sound, außergewöhnlicher Vielseitigkeit und minimalem Platzbedarf auf deinem Pedalboard überzeugt. Dank intuitiver Regler und multifunktionaler Schalter gestaltet sich die Bedienung einfach und intuitiv. Zusätzlichen Komfort bieten die internen Speicherplätze, über die du deine eigenen Setups bei Bedarf unmittelbar abrufen kannst. Die hohe Audioqualität der Pedale der 200-Serie basiert auf einer 32 Bit internen Signalverarbeitung. Zudem kannst du die Pedale optional über externe Umschalter, ein Expression-Pedal oder via MIDI steuern.

Das MD-200 Modulation arbeitet mit den Algorithmen des Flaggschiffs MD-500 und vereint eine Vielzahl von herausragenden Effekten in einem kompakten und komfortablen Pedal. Mit den zwölf Modi stehen dir unterschiedlichste Modulationssounds zur Verfügung – jeder davon mit speziell angepassten Reglern, über die du den jeweiligen Sound von der Pedaloberfläche aus tiefgreifend verändern kannst. Dank der leistungsstarken Insert-Funktion kannst du Drive-Pedale und weitere Effekte komfortabel in den Signalfluss integrieren und wahlweise vor oder nach der internen Modulation schalten.

With the 200 series, BOSS introduces a new generation of pedals that pack advanced sound and versatility into a streamlined size that saves space on your board. Grab-and-go controls and multi-function switches make operation easy and intuitive, while onboard memories allow you to store multiple setups for instant recall. All 200 series pedals feature premium audio quality with 32-bit internal processing and offer support for external control via footswitches, an expression pedal, or MIDI.

Outfitted with algorithms from the flagship MD-500, the MD-200 Modulation delivers an array of world-class effects in one small, convenient pedal. Twelve different modes provide every mod sound you need and more, and each includes customized controls that unlock deep tone shaping right from the panel. And with the powerful insert function, it’s simple to patch in drive pedals and other effects for selectable pre or post processing.

Review by Paolo De Gregorio, delicious-audio.com

Review by Stephan Güte, amazona.de

MD-200 Modulation

Famous for its woody, organic and beautiful sounds of saturation, these legendary British amplifiers, the Super Lead &amp; Super Bass, have been delivering one of the all-time classic sounds for almost 50 years. Players like Jimmy Page, Paul Kossoff and countless other relied on this type of tone for their signature sound. Xotic has recreated this vintage masterpiece in a rugged small enclosure. The SL Drive offers very amp-like response and cleans up nicely with a roll of your guitar’s volume knob. The internal dip switches allow you to choose the sound characteristics of both 1959 models. The “Super Lead” setting offers a brighter tone with more gain, while the “Super Bass” setting has more low end with less highs. This compact design is a powerful tool for the working musicians.

Xotic

Demo by Guitarist

SL Drive

There is one overdrive circuit to this day has been the most talked about, the most sought after, and the most mythical of them all. It’s big, it’s expensive, and it has certainly earned its place at the table. Wampler has painstakingly and faithfully reproduced that magical tone in all its glory in an unbelievably small package, and its name is Tumnus. Tumnus is a versatile addition to any setup, any style. Stack it with another pedal to help push or shape the total amount of gain, use it as a stand alone overdrive, or use it as a slightly dirty boost to push the front end of your amp over the edge. You can even use it as a buffer, because just like the original this pedal is not true bypass. Instead, faithful to the original, this pedal contains a buffered bypass tone legendary in its own right. The Tumnus’ streamlined 3 control knobs (Volume, Gain, and Treble) allow you to quickly dial in your tones no matter what the gig calls for. We aren’t going to sit here and claim it has magical parts, or we sourced out 60 year old diodes that make it perfect, but we are going to say that during our research we looked at everything available and then only used the parts that Brian chose to replicate that amazing tone. Let’s face it, not everyone has room for a four-legged beast on their board. This smaller version slips in and out of a myriad of tight situations. Now you can have the tone. Now you can have history. Now you can have it all without having to sell your prized gear possessions. The Wampler Tumnus, standing up for that amazing tone, but without the outrageous claims often associated with it.

Review by bonedo

Review by The Gear Check 

Demo by Pete Thorn

Demo by Tone Factory

Tumnus

QuickMount Type L

Pedal-Montageplatte für Standard-Mini-Pedale

Pedal Mounting Plate For Standard Mini Pedals

The GRID SLAMMER™ overdrive pedal produces a variable boost in gain over a wide range with a classic, guitar-centric midrange bump that enhances many different playing styles. It’s a true overdrive “specialist” that covers an amazing array of what many top players consider the most expressive and musical ranges of overdrive. From sweet, subtle breakup to a harmonically smoldering overdrive that can both sting and sing, the GRID SLAMMER sets a new bar in legendary overdrive! 

Mesa Boogie

Review by musicradar

Demo by EytschPi42

Grid Slammer

Der legendäre und klassische Original-POG wurde von allen großen Magazinen auf allen Kontinenten für sein makelloses polyphones Tracking und seine musikalische Flexibilität ausgezeichnet. Der EHX Micro POG bietet das gleiche perfekte Tracking und glatte Polyphonie in einem vereinfachten Design. Der Micro POG ist jetzt in einem kleinen Pedalboard-freundlichen Druckguss-Gehäuse untergebracht und wird Sie schon bei der ersten Benutzung umhauen.

Mit dem MICRO POG können Sie Ihr ursprüngliches „trockenes Signal“ mit zwei verschiedenen Oktaven (eine oberhalb und eine unterhalb Ihrer ursprünglichen Note) mischen, um völlig neue, inspirierende Sounds zu erzeugen.

The Legenday and classic original POG won top awards from every major magazine on every continent for its flawless polyphonic tracking and musical flexibility. The EHX Micro POG delivers the same perfect tracking and smooth polyphony in a simplified design. Now in a small pedalboard-friendly diecast chassis, the Micro POG delivers and will blow you away the first time you use it.

With the MICRO POG, you can mix together your original “dry signal” with two different octaves (one above and one below your original note) to create totally new inspiring tones.

Electro-Harmonix

Review by Talk Bass.com

Demo by Nikita Astrakhantsev

Demo by Eric Merrow

Micro POG

PedalSafe Type C

QuickMount Type C

Pedalmontageplatte für große vertikale Pedale

Pedal Mounting Plate For Large Vertical Pedals

Schutzabdeckung & RockBoard-Montageplatte für große vertikale Pedale

Protective Cover & RockBoard Mounting Plate For Large Vertical Pedals

Schutzabdeckung & universelle Montageplatte für große vertikale Pedale

Protective Cover & Universal Mounting Plate For Large Vertical Pedals

Dual Reverb DR-3 is an analog-digital stompbox which adds some deepness and space to your guitar tone. DR-3 makes you feel like playing in the real room with many reverberations. You can switch between two sets (A and B) of the reverb time and intensity. The MAX ANALOG technology and the optical true bypass assure the best sound quality and smooth ON/OFF switching (sustaining previously played tones).

DR-3 is constructed according to mostly used by guitarists parameters. There were chosen in it the adequate ranges of reverb time and intensity.

G-LAB

Review by guitarworld.de

Demo by The Great Refret

Review by Gitarrenbu.de

Demo by Marc Eric

DR-3

GSC-4

KORG

Website 

Pitchblack

Dunlop

GCB-95 Cry Baby Wah

QuickMount Type M

Pedal-Montageplatte für Dunlop Cry Baby Wah-Pedale

Pedal Mounting Plates For Dunlop Cry Baby Wah Pedals

Für 15-25 FX-Pedale, 2 MOD-Slots - **820 x 424 mm / 32.28" x 16.69"** - erhältlich mit Gig Bag oder Flight Case

For 15 - 25 FX pedals, 2 MOD slots - **820 x 424 mm / 32.28" x 16.69"** - available with Gig Bag or Flight Case

Lee Atkin

John Frusciante 2025 Board 

Jonathan James

Demo by 

TU-3 Chromatic Tuner

PedalSafe Type E1

QuickMount Type E

Pedal-Montageplatte für Standard-Boss-Pedale

Pedal Mounting Plate For Standard Boss Pedals

Schutzabdeckung & RockBoard-Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & RockBoard Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Schutzabdeckung & universelle Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & Universal Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Willkommen in der Welt der moogerfooger® Analog-Effektmodule! Ihr Modell CP251 Control Processor ist ein robustes, professionelles Instrument, das gleichermaßen auf der Bühne und im Studio zu Hause ist. Seine hervorragende Funktionalität und klassischen Effekte stammen aus seiner hochmodernen Vollanalog-Schaltung, die unter der persönlichen Leitung von Bob Moog entwickelt und gebaut wurde.
Ihr CP251 ist ein direkter Nachfahre der originalen modularen Moog™-Synthesizer. Er enthält insgesamt acht unabhängige Funktionen zur Erzeugung und Verarbeitung von Steuersignalen. In Verbindung mit anderen moogerfoogers, spannungsgesteuerten analogen Synthesizern, MIDI-zu-CV-Wandlern oder anderen Geräten, die analoge Steuersignale erzeugen oder empfangen, ermöglicht Ihnen der CP251, eine erstaunliche Vielfalt dynamischer Synthesizer-Effekte zu erzeugen.

Welcome to the world of moogerfooger® Analog Effects Modules! Your Model CP251 Control Processor is a rugged, professional-quality instrument, designed to be equally at home on stage or in the studio. Its great functionality and classic effects come from its state-of-the-art all-analog circuitry, designed and built under Bob Moog’s personal direction.
Your CP251 is a direct descendent of the original modular Moog™ synthesizers. It contains a total of eight independent control-signal generating and processing functions. Used with other moogerfoogers, voltage-controlled analog synthesizers, MIDI-to-CV converters, or other devices that produce or accept analog control signals, the CP251 enables you to create an amazing variety of dynamic synthesizer effects.

Moog

Demo by Janek Gwizdala

Review by Vintage Synth

Review by Music Radar

CP-251 Control Processor

Die nächsten Folgen dieser Kolumne basieren auf einer Frage von G&B-Leser Ralph Müller-Domke. Ralph berichtet, dass er seinen MXR Dyna Comp zwar sehr schätzt, aber die Nebengeräusche v. a. im Vergleich zum Dyna-Comp-Bausatz von uk-electronic sehr störend findet.

The Dyna Comp Compressor is one of the most popular compressors of all time. Whether you want to tighten up your signal, add rich sustain, or create the percussive and clicky sound heard on numerous hit records, this pedal is straightforward and easy to use. For these reasons, the Dyna Comp Compressor has been the secret weapon on countless pedalboards for years.

Review by GUITAR WORLD 

Review by Gitarre & Bass 

Demo by jimdunlopusa

Demo by SweetWater

Dyna Comp

Oft kopiert aber nie erreicht, rangiert das schwer zu findende, originale, Phase 90 bei den Sammlern alter Bodentreter ganz weit oben. Das Original - seit der Gründung der Firma Dunlop bis in die späten 70er Jahre erhältlich – definierte den klassischen Phase Shifter Sound und war in allen Musikstilen zu hören, egal ob Hard Rock, Jazz-Fusion oder Funk-Hits. Der nach dem Kultpedal der Firma designte Phaser kommt puritanisch mit einem Regler aus, über den der Phaser-Speed einstellbar ist. Eine rote LED über dem stabilen Fußschalter zeigt den Schaltstatus an. Das massive Spritzgußgehäuse verfügt über jeweils 1/4" Klinke In- und Out-Eingänge. Betrieben wird der Kulttreter mit einer 9V Batterie, die in einem leicht zugänglichen Batteriefach auf der Unterseite Platz findet. Es ist erhältlich in der ursprünglichen orangenen Farbe.

This device has found its way into many of Eddie Van Halen's recordings, adding a shimmery velocity to lead passages or a more dramatic swoosh to muted strumming. Not just for guitars; it works well with bass, keyboards and even vocals. Vary the speed from a subtle, long cycle to a fast, watery warble...and myriad vintage vibrations in between. Power: Single 9 volt battery or Dunlop ECB-003 AC Adapter - Controls: Footswitch toggles effect on/bypass (red LED indicates on) Speed knob varies rate of phase sweep

Review by Guitar Player

Demo by Reverb

M101 Phase 90

M117/M117R Flanger

The Echoplex EP-3 tape echo unit is famous for its deliciously warm, organic modulation and sweet musical voice—a key component to some of the most iconic guitar tones from the '70s onward. The original EP-3 units, however, are expensive, temperamental, and larger than a VCR.

That's where the EP103 Echoplex Delay comes in. It's the size of a Phase 90, and it delivers the EP-3's legendary tones with a simple control interface and a hi-fi all-analog dry path. The Delay control sets the time between repeats—from 65ms to 750ms—the Sustain control sets the number of repeats, and the Volume control sets the output level of your repeats.

Review by Gitarre & Bass

Review by Premierguitar

EP103 Echoplex Delay

PedalSafe Type A1.1

Schutzabdeckung & RockBoard-Montageplatte für MXR® Standardgröße und Dunlop® Echoplex Delay Pedale

Protective Cover & RockBoard Mounting Plate For MXR® standard size and Dunlop® Echoplex Delay pedals

Schutzabdeckung & universelle Montageplatte für MXR® Standardgröße und Dunlop® Echoplex Delay Pedale

Protective Cover & Universal Mounting Plate For MXR® standard size and Dunlop® Echoplex Delay pedals

The MXR Carbon Copy Analog Delay features a completely analog audio path for the ultimate in rich, warm delay-made possible only by old-school bucket brigade technology. This design boasts an amazing 600ms of delay time with optional modulation via a top-mounted switch and a simple, three-knob layout that controls Delay time, Mix (dry/wet blend), and Regen (delay repeats)-all in a pedal no bigger than a Phase 90. In addition, two internal trim pots offer user-adjustable width and rate control of the modulation for even more tonal options. The Carbon Copy will take you from crisp “bathroom” slap echoes to epic, Gilmour-esque delays with a twist of a knob. True hardwire bypass, single 9-volt operation, and stage-ready blue LEDs round out the package.

Demo by PMTVUK

Demo by Marty Music

M169 Carbon Copy Analog Delay

Jan Wirken

CE-1 Chorus Ensemble

Tavish Stone

The NEW Micro-Tron IV is the newest reincarnation of the classic Mu-Tron III™ envelope filter. The Micro-Tron IV provides all the classic Jerry tone and Bootsy funk, in a pedalboard-friendly size and powered by industry-standard 9V DC. We’ve also added an OUTPUT level control and the ability to footswitch select between UP and DOWN drives. It’s never been easier to cruise down “Shakedown Street” or get to “Higher Ground” – the Micro-Tron IV sounds amazing on guitar, bass, keys, horns, harmonica… you name it!
The new Micro-Tron IV is based upon the award winning Micro-Tron III and improves it with our very own MU Opto-Mod technology. We have also added standard CV input to accept an expression pedal such as the Dunlop DVP4 without modification! Furthermore, you can send envelope Control Voltage to other units such as the Phasor III and Bi-Phase pedals.

Mu-Tron

Demo by Von Scheffler

Micro-Tron IV

M133 Micro Amp by MXR