andronik supersonik

justbitch

ch ray

The DynaVerb Limited Spring Edition is a stereo reverb pedal for professional use. With three new reverb effects of Reversed, Gated, and Spring-type, and three Hall and three Room reverbs this versatile pedal is designed for bass players who want to expand their sound options.

The new DynaVerb is created for bass but can enhance any instrument from guitar to keyboard and even vocals with its studio-quality sound in full range.

Review by Premier Guitar

Review by bonedo

Product Page

Manual

Demo by Gregor Fris

Demo by Bruno Tauzin

DynaVerb Limited Spring Edition

Tester

With the TU-3W, BOSS brings Waza Craft mojo to the world’s leading stompbox tuner. At its core, the TU-3W provides rock-solid tuning equivalent to the industry-standard TU-3. In true Waza tradition, the pedal’s benchmark functionality is further enhanced with BOSS skill and craftsmanship. Pure, uncolored signal transfer is essential for a tuner, and the TU-3W features redesigned circuitry with selectable buffered or true-bypass operation and the most transparent audio pass-through possible. Packing high-end performance for discriminating players, the TU-3W delivers a premium pedal experience only available from BOSS.

BOSS

TU-3W Tuner

PedalSafe Type E1

QuickMount Type E

Pedal-Montageplatte für Standard-Boss-Pedale

Pedal Mounting Plate For Standard Boss Pedals

Schutzabdeckung & RockBoard-Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & RockBoard Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Schutzabdeckung & universelle Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & Universal Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

The micro-Thumpinator is a bandwidth optimizer designed for bass guitar. It removes the low frequency signals that are outside the range of notes produced by the instrument.

Infrasonic frequencies cannot be reproduced by standard bass cabinets but they often make amplifiers clip, especially when they are set to boost the lower frequencies. The Thumpinator filters the signal content optimising the energy delivered by the amplifier. Low-frequency clip is substantially reduced and the sound is tighter especially at high volume levels.

The micro-Thumpinator accepts instrument and line level signals. It can be used between preamplifier and amplifier, between bass and amplifier or anywhere in the effect chain (line or instrument level). It can also be connected directly to an audio interface.

SFX Sound

Review by Talk Bass.com

Demo by Paul Reich

Official Product Video

micro-Thumpinator v2

There are few compressors that are more sought after than our yellow box Diamond. This next-gen compressor maintains the classic circuit architecture while increasing range and functionality. The new EQ section allows you to sculpt your tone in the same box that squashes it (that’s a good thing). Furthermore, the attack switch allows you to go from the signature ultra-snappy Diamond comp style all the way to softer transparent compression.

Diamond Pedals

Review by Guitar World

Review by thegearpage

Demo by BassTheWorld

Demo by Pedalboard of the Day

Diamond Bass Compressor EQ

QuickMount Type B

Pedal-Montageplatte für Standard-Einzelpedale

Pedal Mounting Plate For Standard Single Pedals

Lee Atkin

Entwickelt in Zusammenarbeit mit Bass-Professor und Klangkenner Ian Martin Allison ist der MXR Bass Synth ein Kraftpaket unter den Pedalen, das donnernde Sub-Oktaven, expressive Hüllkurven und üppige Modulationseffekte mit erstklassigem Tracking und Sustain bietet – dazu alle Funktionen, die Sie benötigen, um jeden einzelnen Aspekt Ihres Klangs zu formen.

Designed with low-end professor and tone connoisseur Ian Martin Allison, the MXR Bass Synth is a powerhouse of a pedal offers thunderous sub-octave, expressive envelope, and lush modulation effects with killer tracking and sustain—plus all the features you need to shape every detail of your tone.

Demo by Nate Navarro

Review by No Treble

Review by Gear News

Bass Synth MB301

M81 Bass Preamp

Für 4-7 FX-Pedale - **470 x 142 mm / 18.50" x 5.59"** - erhältlich mit Gig Bag oder Flight Case

For 4 - 7 FX pedals - **470 x 142 mm / 18.50" x 5.59"** - available with Gig Bag or Flight Case

Vasco Gutiérrez

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 3 V2 ist eine Patchbay für Sänger und Akustik-Musiker. Über die zwei XLR-Ausgänge kannst du ein Stereo-Signal von dein MOD senden und an den XLR-Eingang lässt sich ein Mikrofon anschließen. Mit drei TRS-Through-Verbindungen lässt sich das MOD 3 V2 außerdem als zentraler Zugang und Ausgang des Boards nutzen um zum Beispiel Effektpedale in den FX-Loop eines Verstärkers einzuschleifen.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 3 x 6,3 mm TRS thru
- 2 x XLR thru (männlich vorne / weiblich hinten)
- 1 x XLR thru (weiblich vorne / männlich hinten)
- 1 x DC 2,1 x 5,5 mm Hohlstecker thru
- 1 x AC IEC thru (männlich vorne / weiblich hinten)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel


The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 3 V2 is a pass-thru box designed for use by vocalists and acoustic players. The 2x XLR outputs allow you to send a stereo signal from your MOD and the 1x XLR input can be used to connect your microphone. You can also use it to run several pedals from your board through the effects loop of your amp, or simply use the MOD as a central access point to your pedalboard.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 3 x 6,3 mm / ¼" TRS thru
- 2 x XLR thru (male front / female back)
- 1 x XLR thru (female front / male back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR Patchbay for Vocalists & Acoustic Players

Der RockBoard Pedalboard Drawer ist eine simple aber extrem effiziente Lösung zum Organisieren und Verstauen von optionalem Zubehör in einem RockBoard Pedalboard. Der Pedalboard Drawer wurde entwickelt, um Zubehör wie Kabel, Plektren, Wireless Systeme und vieles mehr im MOD Slot des Pedalboards aufzubewahren. Durch den zentralen Zugang auf der Front des Pedalboards bietet der Drawer einen sichereren, sauberen und einfach zugänglichen Platz zur Aufbewahrung direkt am Setup. Durch die intelligente Arretierung der rotierenden Schublade ist eine zusätzliche Sicherung nicht notwendig.

- rotierende Schublade für RockBoard Pedalboards
- intelligenter Drehmechanismus mit sicherer Arretierung
- für Zubehör, Kabel, Wireless Systeme, Plektren, etc.
- passt in die MOD-Slot Aussparung von RockBoard Pedalboards (außer RockBoard DUO 2.0, 2.1, und 2.2)
- Material: Verstärktes Polyamid
- inkl. Montagematerial und Werkzeug
- Maße (B x T x H): 175 x 84,5 x 47 mm
- Gewicht: 150 g
- schwarz
- Hinweis: Nicht kompatibel mit den 19" Rack Panel Single oder Double (1U) - Rack Mount for RockBoard MOD

The RockBoard Pedalboard Drawer is a simple but super effective solution to organize and store optional accessories in your RockBoard pedalboard. The Pedalboard Drawer is designed to store accessories such as cables, picks, wireless systems and more directly in the MOD slot of the pedalboard. With access on the front of the pedalboard, the Drawer provides a safer, cleaner, and convenient place for storage. The Drawer opens and closes using an intelligent swivel locking mechanism.

- rotating mounting drawer for RockBoard pedalboards
- intelligent swivel locking mechanism
- for accessories, cables, wireless systems, etc.
- fits MOD slots in RockBoard pedalboards (except RockBoard DUO 2.0, 2.1, 2.2, and 2.3)
- material: reinforced polyamide
- incl. all mounting screws, counter nuts, and tools
- dimensions (W x D x H): 175 x 84.5 x 47 mm / 6 57/64" x 3 21/64" x 1 27/32"
- weight: 150 g / 0.33 lbs
- black
- Note: Not compatible with 19" Rack Panel Single or Double (1U) - Rack Mount for RockBoard MOD

Rotating Drawer for RockBoard Pedalboards

Sandbox Pedal Board

Björn Patrik Pfeiffer

Zweifach-Fußschalter für Verstärker und Effektgeräte

The TT-2 is compatible with a large range of digital amps, effects units, MIDI controllers and stomp boxes that support external foot switches. The TT-2 features a resilient metal chassis, and two momentary foot switches with a small click action for tactile feedback.

The TT-2 is switchable between TRS and TS mode. TRS mode supports two switches on a single cable compatible with devices such as the Line 6 HX Stomp, DL4 Mk2, Eventide H9, Fractal Audio MFC, and RJM Mastermind. In this mode you can connect both switches to the device with just a single TRS cable, removing the need for Y cables or adapters.

Mission Engineering

TT-2 Footswitch

Mit dem AfterShock Bass Distortion wird es richtig schmutzig. Für sich alleine und direkt aus der Schachtel hat es bereits drei massive Bass Distortion Engines mit enormer tonaler Bandbreite. Das Spektrum reicht hier von Low-End Crunch über natürlichen subtilen röhren-artigen Overdrive bis zu In-Your-Face germanium-style Fuzz. Angeschlossen ans Smartphone hat man mit der Source Audio Neuro App Zugriff auf weitere Parameter und eine Bibliothek aus über 40 Overdrive, Distortion und Fuzz Algorithmen. MIDI-Kompatibilität via separat erhältlichem Source Audio Neuro Hub und Stereo In- und Outputs runden das Paket ab und machen diesen Bass Drive zu einem der flexibelsten am Markt.

With the AfterShock Bass Distortion it gets really dirty. By itself and directly out of the box, it comes with three massive bass distortion engines of enormous tonal range. Their spectrum spans from low-end crunch to subtle tube-like overdrive to in-your-face germanium style Fuzz. Plugged to a smartphone one gets access to a myriad of further parameters and a library of over 40 overdrive, distortion and Fuzz algorithms via the Neuro App. MIDI compatibility via the separately available Source Audio Neuro Hub as well as stereo in- and outputs make this one of the most flexible bass drives on the market.

Source Audio

Official Product Page

Source Audio SA 246 One Series AfterShock Bass Distortion - Official Demo Video

Aftershock Bass Distortion (SA246)

PedalSafe Type SR1

QuickMount Type SR1

Pedal-Montageplatte für SOURCE AUDIO AfterShock, Vertigo, TrueSpring Reverb, Gemini Chorus, C4 Synth & EQ Pedale

Pedal Mounting Plates for SOURCE AUDIO AfterShock, Vertigo, TrueSpring Reverb, Gemini Chorus, C4 Synth & EQ pedals

Schutzabdeckung & RockBoard-Montageplatte für SOURCE AUDIO AfterShock, Vertigo, TrueSpring Reverb, Gemini Chorus, C4 Synth & EQ Pedale

Protective Cover & RockBoard Mounting Plate For SOURCE AUDIO AfterShock, Vertigo, TrueSpring Reverb, Gemini Chorus, C4 Synth & EQ pedals

Schutzabdeckung & universelle Montageplatte für SOURCE AUDIO AfterShock, Vertigo, TrueSpring Reverb, Gemini Chorus, C4 Synth & EQ Pedale

Protective Cover & Universal Mounting Plate For SOURCE AUDIO AfterShock, Vertigo, TrueSpring Reverb, Gemini Chorus, C4 Synth & EQ pedals

Teeratai Kaewmanee

The AG Preamp pedal inherits the renowned AG amplifier’s tight, fast response and extensive tonal flexibility, making it an essential component for discerning bassists. With its powerful 4-band EQ, the AG Preamp lets you sculpt your tone with finesse, adapting to any musical genre or playing style. From warm and punchy to bright and articulate, the pedal delivers unrivaled control and responsiveness. Foot-switchable broadband “deep” and “bright” controls further enhance your sound, providing added depth and presence for a rich and natural sonic impact.

Operating at 18 volts, the AG Preamp pedal ensures generous headroom and pristine signal integrity. You can confidently push your sound to the limits without sacrificing clarity or encountering unwanted distortion. The pedal maintains a clean, transparent tone that stays true to the player’s style.

The AG Preamp pedal also offers essential connectivity options. It features a built-in headphone output and auxiliary input, enabling silent practicing and jamming along with favorite tracks, as well as a DI output with pre/post and ground lift controls, making it an ideal solution for live performances and studio or at-home recording sessions.

Aguilar

Demo by Bass Bonedo

Review by Talk  Bass.com

AG Preamp

Die StageBug SB-2 ist eine kompakte passive Direktbox, die sich perfekt für aktive Bässe und Keyboards eignet. Sie ist klein genug, um in einem Instrumentenkoffer Platz zu finden, und verfügt über eine Stereo-Mono-Mischfunktion, um Mischpultkanäle einzusparen.

The StageBug SB-2 is a compact passive direct box that is perfect for active basses and keyboards, is small enough to fit inside an instrument case, and features a stereo to mono mix function to save mixer channels.

Radial Engineering

Demo by Want 2 Check

Demo by Chris Lang Music

Review by TalkBass

Quick Start Guide

Stagebug SB-2

When it was introduced in 2010, the original POLYTUNE forever revolutionized the way musicians tune their instruments. Praised by professional and amateur players, guitar tuning instantly became as simple as Strum - Tune - Rock! So how do you make the best-selling polyphonic tuner even better? You take it to the next level by: providing multiple tuning modes, including polyphonic, chromatic, strobe and a variety of altered tunings; adding an onboard BONAFIDE BUFFER to preserve your tone over long cable runs and pedal board signal paths; and upgrading the LED display for even higher tuning accuracy. Say hello to your next tuner – POLYTUNE 3.

TC Electronic

Review by Charleston Classical Guitar

Review by musicradar

Demo by American Musical Supply

Demo by Addicted to Gear

Demo by realbeal

Polytune 3

PedalSafe Type G

QuickMount Type G 

Pedal-Montageplatte für Standard TC Electronic Pedale

Pedal Mounting Plate For Standard TC Electronic Pedals

Schutzabdeckung & RockBoard Montageplatte für Standard TC Electronic Pedale

Protective Cover & RockBoard Mounting Plate For Standard TC Electronic Pedals

Schutzabdeckung & universelle Montageplatte für Standard TC Electronic Pedale

Protective Cover & Universal Mounting Plate For Standard TC Electronic Pedals

eghapon yasitt

Der Momentary Footswitch ist ein ultrakompakter Momentary-Fußschalter-Controller, der nicht nur für die Verwendung mit der SONICAKE Matribox II, sondern auch mit anderen Geräten entwickelt wurde, die Momentary-Fußschalter-Controller unterstützen. Kompakte Größe mit Vollmetallgehäuse, leicht und langlebig.

The Momentary Footswitch is an ultra-compact momentary footswitch controller designed not only for use with the SONICAKE Matribox II, but also with other devices that support momentary footswitch controllers. Compact size with full metal shell, lightweight and durable. 

Sonicake

Sonicake QFS-10

Die Firma Roland gibt es bereits seit 1972. Sie stellt unter verschiedenen Markennamen eine Vielzahl an Instrumenten, Verstärkern, E-Drums, Synthesizer etc. her. Für Gitarristen und Bassisten ist dabei vor allem der Name Boss interessant. Unter dieser Marke kümmert sich Roland seit Jahrzehnten mit hochwertigen Effekten um unsere Bedürfnisse. Die Homepage der Company listet allein sieben spezielle Basseffekte auf. Wer gleich eine ganze Vielzahl an unterschiedlichen Effekten sucht, diese gerne auch nach Herzenslust miteinander kombiniert und dabei nicht lauter einzelne Bodentreter mitschleppen möchte, greift zu einem Multieffekt. Auch in diesem Bereich hat Boss gleich drei Geräte zur Auswahl. Der jüngste Spross ist das GT-1B, welches eine Lücke schließen soll, die so manchen Bassisten bislang vor einem Multieffekt hat zurückschrecken lassen – das Problem der einfachen Bedienung! Aufgrund der Funktionsvielfalt gleichen Multieffekte nämlich schnell mal einem Computer und man muss sich nicht selten durch Tastenkombinationen und diverse Untermenüs graben, um Zugriff auf den gewünschten Parameter zu erhalten. Aus diesem Grund brachte Boss schon vor einigen Jahren das ME-50B auf den Markt, was komplett über Drehregler zu bedienen ist. Das Konzept ging zwar auf, allerdings bleibt dennoch eine gewisse Vielfalt bzw. Bandbreite auf der Strecke. Das Boss GT-1B soll nun beide Welten vereinen: Digitale Funktions- bzw. Soundvielfalt und einfache, intuitive Bedienung.

The GT-1B gives bass players a massive range of pro tone-shaping power in a small and robust package. Backed by BOSS’s premium sound engine, you have full access to a huge selection of bass-optimized amps and effects for stage and studio playing. The streamlined interface lets you dial in sounds fast, while the onboard control switch and expression pedal enable you to adjust multiple effects in real time. And by connecting to BOSS TONE CENTRAL, you can download new patches, editing software, and more. Compact, rugged, and battery powered, the GT-1B is the ultimate mobile tone companion for every bassist.

Review by Christian Spohn, amazona.de

Review by Thomas Meinlschmidt, bonedo.de

Demo by Premier Guitar 

Demo by Andertons Music Co

GT-1B Guitar Effects Processor

DC BRICK M237

Für 9-14 FX-Pedale, 2 MOD-Slots - **722 x 236 mm / 28.43" x 9.29"** - erhältlich mit Gig Bag oder Flight Case

For 9 - 14 FX pedals, 2 MOD slots - **722 x 236 mm / 28.43" x 9.29"** - available with Gig Bag or Flight Case

Hugo Carvalho

Feanor_Dream

BG250

Volt1(L)

Volt1(R)

The new GLX-D+ Wireless Guitar Pedal System features the WA305 Premium Guitar Cable, the GLXD1+ Digital Bodypack, and the GLXD6+ Guitar Pedal. Go wireless without compromising your tone or complicating your rig.

Shure

Demo by Basscoach Denis Busch

GLXD16+

Evan Fiegener

Der Darkglass MIDI-Fußschalter lässt sich einfach über die Darkglass Suite konfigurieren und bietet anpassbare MIDI-Befehle auf Knopfdruck. Der MIDI-Fußschalter lässt sich schnell mit gebrauchsfertigen Vorlagen für Darkglass-Produkte einrichten. Es ist auch ein komplexeres benutzerdefiniertes MIDI-Setup mit Befehlen auf der Haupt- und Unterebene, dem gleichzeitigen Senden mehrerer Nachrichten und mehr verfügbar, was es zu einer leistungsstarken Befehlszentrale macht, die sich nahtlos in Ihr Setup integriert.

Der MIDI-Fußschalter kann flexibel über 9V DC oder USB mit Strom versorgt werden. Darüber hinaus sind die Darkglass-Verstärker in der Lage, das Gerät über denselben 1/4-Zoll-Stecker oder einen 7-PIN-MIDI-Anschluss mit Strom zu versorgen, der für die Daten verwendet wird, sodass der vollständige Betrieb mit nur einem Kabel möglich ist.

Easily configurable through the Darkglass Suite, the Darkglass MIDI Footswitch offers customizable MIDI commands at the tips of your toes. The MIDI footswitch is quick to set up with ready-to-use templates for Darkglass products. A more complex custom MIDI setup is also available with commands on the main and sub operational layers, simultaneous sending of several messages and more, making it a powerful command center that integrates seamlessly with your setup.

The MIDI footswitch can be powered flexibly through either a 9V DC or USB. In addition, the Darkglass amplifiers are capable of powering it through the same 1/4″ plug or a 7-PIN MIDI connector used for the data, offering the full operation using only one cable.

Darkglass Electronics

Review by Lars Lehmann, bonedo.de

Demo by Patrick Hunter

MIDI Footswitch

Patrick Dougherty

The Canvas stereo is a Direct Box/Line Isolator designed to remove any resistance between you and your audience by giving a pristine sonic foundation to build your masterpiece upon. From houses of worship to the dive bar downtown, Canvas Stereo is built to be the performance tool that goes wherever you are making your music.

Walrus Audio

Review by HAPPY MAG

Demo by Mark Johnston

Canvas Stereo Dual Line Isolator / D.I.

Nicolas Wilfer

Nucleo Reverb ist nicht einfach nur ein Reverb-Pedal – es ist ein kreatives Instrument, das Inspiration und Entdeckungslust wecken soll.
Mit seinem intuitiven Design und der leistungsstarken M7 Cortex Engine eröffnet es ein riesiges Klangspektrum: von subtilen Ambient-Texturen bis hin zu weitläufigen, filmreifen Soundscapes.
Jedes Detail wurde entwickelt, um unendliche Klangwelten, üppige Atmosphären und lebendig wirkende, sich entwickelnde Soundlandschaften zu erschaffen – spürbar unter den Fingern.
Dieses Projekt ist das Ergebnis jahrelanger Leidenschaft und unserer engen Zusammenarbeit mit Paul Davids. Entstanden ist ein Reverb, das sich traut, weit über das Gewöhnliche hinauszugehen.

Nucleo Reverb is not just a reverb pedal – it’s a creative instrument designed to spark inspiration and exploration. It merges intuitive design with a powerful M7 Cortex Engine capable of delivering a wide spectrum of tones, from subtle ambient layers to expansive, cinematic soundscapes.
Every detail was crafted to unlock infinite textures, lush atmospheres, and evolving soundscapes that feel alive beneath your fingertips.
This project is the culmination of years of dedication and our deep collaboration with Paul Davids, resulting in a reverb that dares to go far beyond the ordinary.

Cornerstone Music Gear 

Demo by Paul Davids

NUCLEO

Conventional external expression pedals often control only parameters of an effects unit, requiring the use of switches on the effects unit to change its status. 
Ampero II Press solves this problem perfectly with its built-in single footswitch. And the optimized footswitch structure   provides the excellent tactile feedback. 

Designed with a passive circuit, it's reliable and convenient.
Whether on stage or in the studio, Ampero II Press is ready to add extraordinary expressiveness to your performance.

HOTONE

Demo by Mad Steex

Ampero II Press

scott delony

Pushing the boundaries of bass innovation, Anagram is our most powerful and versatile multi-effect unit yet. More than just an effects processor—it’s a revolution. With ultra-low latency, deep customization, and seamless integration into the Darkglass ecosystem, it empowers bassists like never before, from studio precision to stage power.

Designed for effortless creativity, Anagram delivers studio-quality sound, advanced signal chain editing, and the groundbreaking Neural Amp Modeler (NAM) technology—all within a compact footprint that accommodates any pedalboard. Fun to use, inspiring to explore, and limitless in sonic potential, Anagram doesn’t just shape tone—it unlocks new ways of assembling music.

Demo by Sweetwater

Demo by Leo Gibson

Demo by The Bass Channel

Demo by Nate Navarro 

Anagram

Canvas Power HP

Für 7-12 FX-Pedale, 1 MOD-Slot - **470 x 330 mm / 18.50" x 12.99"** - erhältlich mit Gig Bag oder Flight Case

For 7 - 12 FX pedals, 1 MOD slot - **470 x 330 mm / 18.50" x 12.99"** - available with Gig Bag or Flight Case

Massimo Bernardinello

P-01

The Doom

Jonathon Hunter Hill

The Intelligent Footswitch is an intuitive yet versatile accessory for our amplifiers. One tap will engage and disengage the Microtubes Engine, while holding for 3 seconds will Mute the amplifier. It is connected to the head via a standard 1/4″ cable and it’s powered by a microcontroller that sends commands to the head using a proprietary communication protocol.

Review by Sweetwater Customer

Intelligent Footswitch

David Litaba

Electro-Harmonix

SINGLE EXPRESSION PEDAL

QuickMount Type M

Pedal-Montageplatte für Dunlop Cry Baby Wah-Pedale

Pedal Mounting Plates For Dunlop Cry Baby Wah Pedals

The Tri-Mod Wah is an evolutionary outgrowth of the original Hot Hand® Wah Filters system in a compact and accessible format. There are 11 Wah effects that range from Classic Wah through Low, Band Pass and Multipeak variations, that can all be further modified using either a Hot Hand motion controller, LFO (Low Frequency Oscillator) or Envelope Follower.

All Soundblox effects pedals are compatible with the Hot Hand Motion Controller — available separately in wireless or wired configurations — or an extensive range of on-board controls. Soundblox pedals provide a wide variety of original sounding effects in a sleekly designed, rugged package that is easy to use and highly flexible. Features• 11 Wah sounds, including Classic Wah, 2 Low Pass filters, 2 Band Pass filters and 6 Multipeak filters.

Review: Source Audio Soundblox Tri-Mod Effects

Users Manual

Soundblox Tri-Mod Wah pedal ...Ultra-smooth auto wah and filter sounds

Soundblox Tri - Mod Wah

Kompressor Pedal für E-Bass
CHT "Constant Headroom Technology" für klare und saubere Tonqualität
Regler für Output, Input, Release, Attack und Ratio 
Led Kette mit 10 LED für "Gain reduction" Anzeige
Status-LED
True Bypass
stabiles Metallgehäuse
Betrieb mit 9V-Batterie oder Dunlop ECB-003 AC Adapter (optional)
Made in USA


Take your favorite studio compressor to the stage with the MXR M87 Bass Compressor. A complete array of controls (Attack, Release, Ratio, Input, and Output) makes it easy to fine-tune your sound, from subtle peak limiting to hard squashed compression effects. Its Constant Headroom Technology gives you plenty of headroom and clear performance. This totally transparent compressor allows your full dynamic range to shine through until your signal reaches the compression threshold, which is indicated by the ten, highly visible gain-reduction status LEDs. It´s all packed into a durable, lightweight aluminum-housing pedal that´s the size of a Phase 90.

Review by awkwardsounds

Review by PREMIER Guitar 

Review by Compressor PedalReviews

Official Product Video 

Demo by Bass The World 

M87 Bass Compressor

The greatest pieces of studio gear studio gear are the ones that add something special to the sound of an instrument, going beyond the job they were designed for and enhancing anything that passes through the circuit. One such piece is the UA 610 preamp, which was the inspiration for the DCX Bass. This retro console preamp is famous for adding vintage, analogue colour to a signal, as well as precise control of level and EQ. Push the level harder and you get rich, harmonic saturation of the kind that makes analogue hardware a must-have in any present-day studio.

The DCX Bass reimagines this classic preamp as a tone-shaper and drive pedal for bass guitar, with a wide range of clean and overdrive tones, EQ frequencies optimised for the instrument, and our Adaptive Circuitry providing a treble response that reacts to playing dynamics. It’s a signal-boosting, tone-enhancing pedal straight from the studio!

Origin Effects

Review by reddit /basspedals

Review by Gitarre & Bass

Sound Samples w/ Ian Martin Allison

DCX BASS

The Duality is a unique fuzz pedal that contains two discrete fuzz circuits—a gated saw-tooth wave and a raunchy high-gain sound—which can be mixed together to yield a vast selection of distinct sonic textures