Christopher Krumscheid

Under construction. So far it was always on DIY boards (plywood board, even one in a keyboard case)

- Everything that needs to be operated (not just switched, this would be done using the ES-8) during a song is in front (wah, volume, expression, flanger, looper and the switcher of course)

- Volume pedal 1 controls input volume, since I don't feel comfort with controlling the volume with the knob on the guitar (question is how to deal with pedals that like most direct contact to the guitar; ES-8 has the option to put buffers everywhere before or behind a loop, so I hope I will find the perfect setting)

- Volume pedal 2 controls overall volume into the amp (mine is a very clean one, so it does not affect overdrive that much)

- All pedals go into the ES-8. Since it has only 8 loops, I have to group pedals that I will never switch during a song, so I would not have to stomp on them. Modulation is one group (Small Stone, Zero Point, Nuvibe), overdrive is another (Tube Driver, Zendrive; ok, maybe I would sometimes stack them), Delay is a third (Echorec, Belle Epoch)

- Loop 8 of the ES-8 goes to a multi effect (Roland GP-16), that's what the EV-5 is used for

- Polytune 3 gets its signal from ES-8

- Ditto+ at the end of course

- Not sure if I really need the Quad Box. And if so it's 
maybe not necessary to put it on the board

The Sausage Full Of Secrets Board

Manuel K.

Der TC Electronic Ditto+ Looper ist ein kompakter digitaler Looper, der für eine einfache und intuitive Loop-Aufnahme entwickelt wurde. Er ermöglicht das Aufnehmen, Overdubben, Rückgängigmachen und Wiederherstellen von Loops über eine einzelne Fußtaste. Das Pedal verfügt über einen internen Speicher für mehrere Loops sowie über eine USB-Verbindung zum Sichern und Importieren von Audiodateien. Die hochwertige, unkomprimierte Audioverarbeitung erhält den Originalklang ohne Klangverfärbung. Der Ditto+ Looper richtet sich an Gitarristen, die eine unkomplizierte Loop-Lösung ohne komplexe Menüs suchen. Das robuste Metallgehäuse eignet sich ideal für den Einsatz auf dem Pedalboard.

The TC Electronic Ditto+ Looper is a compact digital looper pedal designed for simple and intuitive loop recording. It allows players to record, overdub, undo, and redo loops with a single footswitch interface. The pedal features internal loop storage that can hold multiple loops and enables transferring audio via USB for backup or import. Its high-quality uncompressed audio preserves the original signal without coloration. The Ditto+ Looper is designed for guitarists who want straightforward looping without complex menus. It is housed in a compact metal enclosure suitable for pedalboards.

TC Electronic

Review by Guitar World

Official Product Video

Demo by Andertons

Demo by Aaron Short Music

Product Page

Review by musicradar

Review by Looper Pedal Reviews

Quick Start Guide

Manual

DITTO+ LOOPER

QuickMount Type L

Pedal-Montageplatte für Standard-Mini-Pedale

Pedal Mounting Plate For Standard Mini Pedals

Tester

Boonar™ ist ein Effektpedal, das genau darauf ausgelegt ist, den Sound und das Spielgefühl des legendären Binson Echorec, eines magnetischen Drum-Echos mit mehreren Abgriffen, zu liefern. Es ist alles drin und mehr: von einem dicken, saftigen Röhrenton, herrlichen mehrdimensionalen Echowiederholungen, die mit eindringlichen Hallabklängen verschmolzen sind, einer variablen Verzögerungszeit von bis zu einer vollen Sekunde und einem separaten Umschaltsystem für die Wiedergabeköpfe bis hin zu einem erstaunlichen und unverwechselbaren äußeren Erscheinungsbild, das von einem goldenen Finish und einer grün pulsierenden "Magic-Eye"-Pegelanzeige dominiert wird, alles verpackt in einer unglaublich kompakten Stompbox-Form.

Boonar hat den gleichen analogen Signalweg wie das Original Echorec, aber wir haben hochspannungsbetriebene FETs als Röhrenemulatoren verwendet und die magnetische Speichertrommel durch eine DSP-Einheit ersetzt. Wir haben einen speziellen DSP-Code entwickelt, der alle Eigenschaften des tatsächlichen Binson-Speicher-Systems, das wir virtuelle Magnettrommel genannt haben, originalgetreu nachbildet.

Erleben Sie einen authentischen Binson-Sound und genießen Sie die magischen Echos der Vergangenheit!

Boonar™ is an effects pedal precisely designed to deliver sound and feel of the legendary Binson Echorec, a multi-tap magnetic drum echo unit. Everything is in there and more: from thick, juicy tube tone, glorious multi-dimensional echo repeats melted with haunting reverb decays, variable delay time up to a full second and separate playback heads switching system to an amazing and distinctive external looks dominated by a gold finish and green pulsating "magic-eye" level indicator, all packed in an incredibly compact stompbox form.

Boonar shares the same analog signal path as original Echorec but we used high voltage driven FETs as tube emulators and replaced magnetic memory drum with a DSP unit. We developed a special DSP code that faithfully replicates all the characteristics of the actual Binson memory system that we named a virtual magnetic drum.

Reveal an authentic Binson sound and enjoy in magical echoes of the past!

Dawner Prince

Demo by Dawner Prince Electronics

Boonar MkII

Jonas Kvinge

The design and sound is the same as the original (as supplied to Eric Johnson, David Gilmour, etc) but with improved parts such as Switchcraft all metal jacks, click pots, etc.
Each unit is hand built to my specs and I personally check out each Tube Driver to perfection. Then I engrave my signature on the bottom of the case. This insures authenticity now and in the future!

Butler Audio

Demo by shnobel

Demo by Jono East

Review by guitar pedal X

Review by audiofanzine

Tube Driver

Es war der Oktober im Jahr 1971, als die Mannen von Pink Floyd ihr berühmtes Werk „Live at the Pompeii“ im Amphitheater der gleichnamigen italienischen Stadt aufnahmen. Stets mit dabei war eines der wohl angesagtesten Effektgeräte der damaligen Zeit – das Binson Echorec. Wohl kaum ein anderes Gerät prägte so maßgeblich den Sound von Pink Floyd der frühen Jahre wie dieses Echogerät, dessen Prinzip auf einer rotierenden Magnetscheibe basierte, die mit vier Tonköpfen das Signal aufnahm bzw. abspielte. Dabei machte nicht nur Leadgitarrist Dave Gilmour vom Echorec gebrauch, auch Bassist Roger Waters und Tastenmann Richard Wright nutzen diese Maschine ausgiebig.

The Binson Echorec was so cool we had no choice but to bring it back. And we wanted to bring it back right. We wanted to take all the goodness of that huge Binson Echorec and squeeze it down into a standard sized stompbox without losing anything. In fact, in addition to not losing any of the qualities that made it such a compelling musical device, we wanted to EXTEND its capabilities because the original Binson hinted at possibilities that it couldn’t realize. We’re talking about variable delay time! We thought, “What if we had the same four playback head concept but could stretch the delay time out beyond the 300mS of the original Binson?” Then the rhythmic patterns suggested by the various combinations of those four playback heads could really come to life!

Catalinbread

Review by Amazona 

Demo by The Pedal Zone 

Demo by Catalinbread Effects

ECHOREC

Es ist unklar, wie genau das Flanging entstanden ist. Möglicherweise war es das Ergebnis des Versuchs, die Grenzen der Mehrspuraufnahme auszuloten – vermutlich durch das parallele Abspielen zweier Tonbandmaschinen, die nicht ganz synchron liefen … Vielleicht hat auch einfach jemand im Studio versehentlich die Flanschseite einer Aufwickelspule berührt? Vielleicht war es Les Paul, vielleicht John Lennon und George Martin? Man weiß es nicht genau.

Klar ist jedoch: Die mechanische Studiomethode zur Erzeugung dieses Effekts wurde innerhalb eines Jahrzehnts so verbreitet, dass Unternehmen begannen, den Effekt elektronisch zu simulieren. Diese elektronischen Ansätze waren anfangs innovativ und aufregend, doch in den 80ern wirkten sie abgenutzt und langweilig.

Bei Catalinbread führen wir das darauf zurück, dass diese Geräte den Flanging-Effekt mithilfe eines LFOs erzeugten, der sich in einem vorhersehbaren Tempo auf- und abbewegte – und damit dem Effekt seine Lebendigkeit und Frische nahm. Als wir beschlossen, einen eigenen Flanger zu entwickeln, war uns klar, dass wir ihn so angehen würden, wie es ursprünglich gemacht wurde …


It’s uncertain what exactly the origin of flanging was. It could have been the result of trying to push the boundaries of multitrack recording, probably due to running a couple tape machines in parallel but not quite in sync… Maybe a guy messing around in the studio brushed up against a take-up reel flange accidentally?  Maybe that guy was Les Paul, maybe it was John Lennon and George Martin? It is unclear. But, what is clear is that the mechanical studio method of achieving the effect became, within a decade, commonplace enough for companies to simulate the effect electronically. The electronic approaches were pretty cool and groundbreaking, but by the 80s became tired and worn out. At Catalinbread we attribute this to the fact that these units controlled the flange effect using an LFO that went up and down at a predictable rate taking the life and freshness out of the effect. When we decided to design a flanger, we knew we would approach it the way they originally did it…

Review by reddit /guitarpedals

Review by AMAZONA

Review by The Gear Page

Demo by ProGuitarShopDemos

Zero Point

PedalSafe Type A1.1

QuickMount Type A

Pedal-Montageplatte für Standard-Einzelpedale

Pedal Mounting Plate For Standard Single Pedals

Schutzabdeckung & RockBoard-Montageplatte für MXR® Standardgröße und Dunlop® Echoplex Delay Pedale

Protective Cover & RockBoard Mounting Plate For MXR® standard size and Dunlop® Echoplex Delay pedals

Schutzabdeckung & universelle Montageplatte für MXR® Standardgröße und Dunlop® Echoplex Delay Pedale

Protective Cover & Universal Mounting Plate For MXR® standard size and Dunlop® Echoplex Delay pedals

Das Catalinbread Belle Epoch Delay-Effektpedal orientiert sich am Sound des legendären Maestro Echoplex EP-3, das in den 1970er Jahren zum Arsenal diverser Helden des Rock gehörte, darunter solche Namen wie Brian May, Jimmy Page, Eddie Van Halen, David Gilmour oder Eric Johnson. Sie setzten das Delay oft und gerne ein, neben dem warm klingenden Bandecho-Sound auch wegen seines Preamps, mit dem man einen Amp noch etwas heißer anfahren und zu etwas mehr Zerre überreden konnte.

 The Catalinbread Belle Epoch Tape Echo, has tape echo sounds so authentic you’d swear there was tape inside the pedal! Inspired by the Maestro Echoplex, EP-3 model, perhaps the most famous tape delay ever, the Belle Epoch features everything we love about the EP-3 in a small, maintenance free pedal format. We felt that a “tape echo” pedal was much more than just a standard digital delay with some “filtering” on the repeats. There are a lot of subtle and not-so-subtle traits of the Echoplex that needed to be implemented in order to be authentic. The preamp, the self-oscillation character, the ability to control the “record level” of the signal hitting “tape”, the wow and flutter, the way the repeats decay, the way the circuit interfaces with the amp and other pedals – all these things were important to get right. The original unit was used as a musical instrument unto itself and this is what we captured with the Belle Epoch.

Review by Bonedo 

Demo by Reverb 

Belle Epoch

BOSS freut sich, ein weiteres „Authentic BOSS“ Compact Pedal anbieten zu können: das AC-3. Wie oft stand man schon mit seiner E-Gitarre auf der Bühne oder im Studio und wünschte sich, man hätte eine Akustikgitarre mitgebracht? Für Musiker, die mit leichtem Gepäck unterwegs sind, ist es nicht immer die attraktivste Option, eine zusätzliche Gitarre zum Gig zu schleppen. BOSS AC-3 ist die Rettung! Dieses kompakte Pedal der neuen Generation nutzt die COSM-Modeling-Technologie, um jede E-Gitarre in eine Vielzahl von wunderschönen Akustikgitarren zu verwandeln.

BOSS is pleased to offer another “Authentic BOSS” Compact Pedal; the AC-3. How many times have you been onstage or in the studio with your electric guitar, and wished that you’d brought an acoustic along? For musicians who travel light, hauling an extra guitar to the gig isn’t always the most attractive option. BOSS AC-3 to the rescue! This new-generation compact pedal employs COSM modeling technology to transform any electric guitar into a variety of beautiful acoustic guitars.

BOSS

Demo by Everything Guitar

Demo by Musicmaker

Review by Reddit /guitarpedals

AC-3 Acoustic Simulator

PedalSafe Type E

QuickMount Type E

Pedal-Montageplatte für Standard-Boss-Pedale

Pedal Mounting Plate For Standard Boss Pedals

Schutzabdeckung & RockBoard-Montageplatte für Standard Boss Pedale

Protective Cover & RockBoard Mounting Plate For Standard Boss Pedals

Schutzabdeckung & universelle Montageplatte für Standard Boss Pedale

Protective Cover & Universal Mounting Plate For Standard Boss Pedals

David Litaba

Das Original Crybaby Pedal, das viele zeitlose Rocksounds erzeugte und unter anderem von Größen wie Jimi Hendrix, Eric Clapton, Buddy Guy, David Gilmour benutzt wurde.

When people talk about wah pedals, they're talking about the Crybaby. This is the original—the one that created some of the most timeless sounds in rock. Relied on by Jimi Hendrix, Eric Clapton, Buddy Guy, David Gilmour, and many other greats Features: Heavy die cast construction for years of reliability, 100K ohm Hot Potz potentiometer that allows for that quick, abrupt wah sound. Powered by the Dunlop ECB-003 AC Adapter and/or 9 volt battery.

Dunlop

Official Product Page

Guitar World Demo

Review by bonedo 

Demo by PMTVUK

Demo by SweetWater

GCB95 Cry Baby Standard Wah

QuickMount Type M

Pedal-Montageplatte für Dunlop Cry Baby Wah-Pedale

Pedal Mounting Plates For Dunlop Cry Baby Wah Pedals

Ole Bjerkemo

The Ernie Ball 500k Stereo Volume Pedal features a 500k potentiometer suitable for the audio path of passive or active instruments. Attached to the footplate is a switch that provides the user two distinct operating modes (volume or pan). The stereo 500k pedal is extremely versatile and can be used in stereo or mono applications. Utilizing TRS stereo cables, use the B input and B output. For use as a typical pan pedal, switch the toe tap switch to the pan position and use only the A input. The pedal will pan the signal between the A and B outputs.

Ernie Ball

Demo by  Lucas Betini

Demo by  DeepBlueHarp

Review by Ernie Ball Forum

6165 Stereo Volume/Pan Pedal

Die Fuzz Face Mini-Serie bietet die legendären Fuzz Face-Sounds in kleineren, pedalboardfreundlicheren Gehäusen mit zahlreichen modernen Ausstattungsmerkmalen wie einer hellen Status-LED, einem Netzanschluss und einem praktischen Batteriefach. Das FFM1 Silicon Fuzz Face Mini basiert auf einem Fuzz Face aus dem Jahr 1970 aus unserer eigenen Sammlung, das für seinen hellen und aggressiven Fuzz Face-Sound geschätzt wird, der durch seine abgestimmten BC108-Siliziumtransistoren erzeugt wird.

The Fuzz Face Mini line features legendary Fuzz Face tones in smaller, more pedalboard-friendly housings with several modern appointments such as a bright status LED, an AC power jack and a convenient battery door. The FFM1 Silicon Fuzz Face Mini is spec’d from a 1970 Fuzz Face in our own collection prized for its bright and aggressive Fuzz Face sound delivered by its matched BC108 silicon transistors.

Review by Michael Brown, musicradar.com

Demo by Prymaxe

Demo by germanndude

FFM1 Silicon Fuzz Face Mini

QuickMount Type UH

Universal-Pedal-Montageplatte für horizontale Pedale

Universal Pedal Mounting Plate For Horizontal Pedals

Anders Rapanà

Electro-Harmonix

SOVTEK Small Stone Russian (V3)

Loved by guitarists for decades, it's a Japanese made modulation-type effect unit that made a blazing debut at the Woodstock festival; you already know the one we're talking about. The inimitable sound of this distinctive modulation effect has captivated numerous guitarists and audiences.
Yet, because only a very small number of the original units exist, and because the circuit itself was not accurately understood and its components were difficult to obtain, it was rare to have the opportunity to try out the unit that produced these famous sounds. Such factors elevated the original to a semi-divine status. Numerous clone models were produced by major manufacturers and boutique shops alike, but all of these remain facsimiles that are pale imitations of the original model.
Now, this legendary classic has been reborn under the ideal circumstances of the original engineer's supervision. Starting with original circuits that simulate hard-to-obtain parts, the distinctive modulation sound has been perfectly reproduced. Not content with a simple reproduction, new WAVE sliders have been added, allowing original waveforms to be generated.
This highly sought after pedal with a long history of allure is now unveiled in its new incarnation: the Nuvibe

KORG

Demo by Pedal of the Day

Review by Sound on Sound

Review by Premier Guitar

NuVibe Vibrato Chorus effector

The Dyna Comp Mini Compressor combines the best of classic tone and modern convenience in a housing that's nearly half the size of the original. Thanks to its rare CA3080 "metal can" integrated circuit (IC), this pedal yields quieter operation, greater transparency, and increased dynamic range. An all-new Attack switch toggles between slow and fast attack times.

User Manual 

Demo by yasuMETAL

Product Page 

Review by bonedo

MXR Dyna Comp Mini M291

Product Demo 

M291 Dyna Comp Mini

When it was introduced in 2010, the original POLYTUNE forever revolutionized the way musicians tune their instruments. Praised by professional and amateur players, guitar tuning instantly became as simple as Strum - Tune - Rock! So how do you make the best-selling polyphonic tuner even better? You take it to the next level by: providing multiple tuning modes, including polyphonic, chromatic, strobe and a variety of altered tunings; adding an onboard BONAFIDE BUFFER to preserve your tone over long cable runs and pedal board signal paths; and upgrading the LED display for even higher tuning accuracy. Say hello to your next tuner – POLYTUNE 3.

Review by Charleston Classical Guitar

Demo by American Musical Supply

Demo by Addicted to Gear

Demo by realbeal

Polytune 3

PedalSafe Type G

QuickMount Type G 

Pedal-Montageplatte für Standard TC Electronic Pedale

Pedal Mounting Plate For Standard TC Electronic Pedals

Schutzabdeckung & RockBoard Montageplatte für Standard TC Electronic Pedale

Protective Cover & RockBoard Mounting Plate For Standard TC Electronic Pedals

Schutzabdeckung & universelle Montageplatte für Standard TC Electronic Pedale

Protective Cover & Universal Mounting Plate For Standard TC Electronic Pedals

The BSM OR model is based on the Orange Treble & Bass booster made in the late 60's in England. The OR model includes a tone control which allows an extraoridinary amount of versatility. When set to maximum, the unit produces a very glassy tone. When a middle setting is dialed in, the result is a punchy tone with a mids emphasis. When set to minimum, the unit produces a very bassy tone with a fat bottom end. The long yearned new edition, now issued under the name OR from BSM, includes the same germanium transistors as the original 1960's version.

BSM - Meiser Electronics

OR Treble Booster

Der BOSS ES-8 ist ein 8-fach Effekt-Loop-Switcher. Für Gitarristen mit vielen Einzel-Effektpedalen und einem umfangreichen Pedalboardsystem wird das Leben nun viel leichter. Alleine die Tatsache, dass man seine Effekte mit dem ES-8 sowohl einzeln als auch in Gruppen schalten und auf vielen Speicherplätzen verwalten kann, ist eine wahre Wohltat. Das können andere Loopswitcher auch! Der ES-8 geht jedoch noch viele Schritte weiter. Durch das komplett analog aufgebaute Schaltungsdesign erreicht der Signalfluss eine Qualität, die sich alle Gitarristen wünschen. Zu den 8 Effektloops, von denen einige sogar mit Stereo-Return ausgestattet sind, gesellen sich zusätzlich 3 Control-Switches welche die Umschaltung von externem Equipment, wie z.B. mehrkanalige Verstärker, problemlos ermöglicht. Natürlich ist auch eine umfangreiche MIDI-Schnittstelle vorhanden die ausgefuchste, moderne Setups unterstützt. Der zusätzliche Anschluss von 2 externen Expressionpedalen macht den ES-8 endgültig zur ultimativen Zentrale deines Pedalboards.

The ES-8 Effects Switching System begins life with a sharp and clear mission: to provide pro and high-end users with cool and creative solutions. The new and innovative ES-8 is a system that represents a major leap “out of the box” from the standard individual stomp box utility. It is a whole new way of providing unprecedented capability without sacrificing sound quality. The ES-8 combines far-reaching flexibility with total freedom of expression. All this, in one cool device.

Not just another utility tool, the ES-8 kicks down the door to unlimited possibilities in the universe of musical expression. From this day on, the use of stomp boxes will never be the same. Using BOSS’ advanced technology the ES-8 is designed for spontaneity on the stage. So, go ahead. Jump out of the box. Take the plunge into a whole new world of musical expression. Celebrate the birth of the cool at BOSS with the hot new ES-8 Effects Switching System. It’s a total game changer that will take you to places no musician has ever gone before.

Review by Musiker-Board

Demo by Omilion Audio

ES-8 Effects Switching System

Nick Toye

Kleines und leichtes Expression-Pedal mit Stereokabel
Das Roland EV-5 ist seit Jahren das Standard Expression Pedal für vielfältige Anwendungen. In dem leichten aber stabilen Kunststoffgehäuse befindet sich ein 50 kOhm Poti. Das EV-5 kann auch, abhängig vom Instrument, als Volume-, Realtime Parameter Control- oder Dateneingabe-Pedal genutzt werden.

The EV-5 Expression Pedal is designed for use with keyboards or other Expression-compatible instruments and devices, providing a more dynamic performance. You can set the minimum volume to the level of your choice, thereby determining the maximum effect of the pedal.

Roland

Demo by Daan van der Heijden

EV-5

Das PWT 08 ist ein universeller Pedalboard-Stromversorger mit 2.000 mA Gesamtleistung und 8 Hohlstift-Ausgängen mit negativem Innenkontakt. Davon sind zwei auf 9, 12 oder 18 Volt schaltbar und mit dem beigelegten Y-Kabel für 21, 25, 30 oder maximal 36 Volt Ausgangsspannung kombinierbar. Sie sind voneinander und von den übrigen Ausgängen isoliert. Das PWT 08 ist für eine konstante Spannungsversorgung geregelt und gegen Kurzschluss und Überlast geschützt. Das Gerät ist mit einer LED-Netzanzeige und zweifarbigen LED-Statusanzeigen ausgestattet und wird mit einem Satz DC-Kabeln und Netzadapter geliefert. Das PWT 08 ist die ideale Wahl, wenn Sie nur ein, zwei Stromfresser oder 9-Volt-Pedale einsetzen, die für mehr Dynamik und Übersteuerungsfestigkeit auch mit höheren Spannungen betrieben werden können.

The PWT 08 is a universal pedalboard power supply with 2,000 mA total output and 8 hollow pin outputs with negative internal contact. Two of these can be switched to 9, 12 or 18 volts and can be combined with the included Y-cable for 21, 25, 30 or a maximum of 36 volts output voltage. They are isolated from each other and from the other outputs. The PWT 08 is regulated for a constant voltage supply and protected against short circuits and overloads. The device is equipped with an LED power indicator and two-color LED status indicators and is supplied with a set of DC cables and power adapter. The PWT 08 is the ideal choice if you only use one or two power guzzlers or 9-volt pedals, which can also be operated with higher voltages for more dynamics and overload resistance.

Palmer

PWT08

Alfonso Hermida went back to the Old School thru-hole, film cap, carbon 1/4 watt resistor Zendrive version for 2016.. Holy SMOKES!   Limited Run on these incredible Zens.. They sound phenomenal and we only have a few at this time.. The standard in dynamic, touch-sensitive overdrive pedals. Cut through the mix with the incomparable Zendrive. Inspired by a legendary guitarist, the Zendrive delivers blues, country, jazz and fusion tones associated with some of the finest, most costly amplifiers in the market. Four knobs control the overall volume, gain, tone and voicing of the pedal. At lower settings, the pedal offers extremely light overdrive sounds reminiscent of tube amps set near the “sweet spot.” At higher settings, the Zendrive increases in gain and sustain, producing tasty overdrive and low distortion tones

Lovepedal

Demo by Chris Buck

Demo by Michael Watts

Hermida Zendrive

It was during the 1960s when the original model first appeared. Its origin is so uncertain that even the people who were involved at that time are not sure of the circumstances through which this model went out into the world. What is clear is that in 1969, a legendary guitarist used it in a historic performance, drawing the attention of guitarists all around the world.

Now for more than half a century, it has reigned as a great effect unit. This enigmatic classic in the history of effect devices has been reborn under the ideal conditions of the supervision of the original developer. As on the original model, it provides a switch for selecting either vibrato or chorus, and INTENSITY and SPEED knobs for producing that distinctive effect. The buffer circuit that has such an important impact on the sonic character has been also been newly redesigned by the original designer for the 21st century. And a great bonus: a dedicated expression pedal is also included.

Nuvibe Expression Pedal

Mit der George Lynch Quad Box erweitert Morley seine Palette an Routern und Splitboxen. Der Unterschied zum bekannten George Lynch Tripler ist der, dass man hiermit in der Lage ist, mit zwei verschiedenen Gitarrensignalen zwei Amps anzusteuern. Die beiden Instrumenteneingänge können wahlweise per Fußschalter aktiv geschaltet werden, zwei Outputs versorgen jeweils einen oder bei Bedarf auch beide angeschlossenen Verstärker.

This differs from the known George Lynch Tripler is that it hereby is able to control with two different guitar signals two amplifiers. 
The two instrument inputs can either be activated via footswitch, two outputs, each supplies one or both of the connected amplifiers.

Morley

Demo by dominantmusic1

Quad Box

Der Detour, den ich mir selbst aus Teilen des Anbieters "Das Musikding" gebaut habe, ist ein Schalter, der Ein- und Ausgang vertauscht. Er wird vor ein Wah-Pedal geschaltet um zwischen normaler Verschaltung und der umgekehrten Verschaltung hin- und herschalten zu können. Stöpselt man die Gitarre in den Ausgang eines Wah-Pedals und führt den Eingang zum Amp (oder weiteren Pedalen), ertönt abhängig von der Wahl des Pickups ein schrilles Quietschen, dessen Einsetzen und Frequenz über die Regler einer Stratocaster-Gitarre gesteuert werden kann. Dieser sogenannte Seagull-Effekt (wegen der Ähnlichkeit zum Schrei einer Möwe) wurde von David Gilmour zufällig durch eine versehentliche falsche Verkabelung entdeckt und in einigen Songs von Pink Floyd verwendet, am auffälligsten im Stück Echoes.

The Detour, which I built myself using parts from the supplier "Das Musikding", is a switch that swaps the input and output. It is connected in front of a wah pedal so that you can switch back and forth between normal wiring and the reverse wiring. If you plug the guitar into the output of a wah pedal and route the input to the amp (or other pedals), depending on the choice of pickup, you will hear a shrill squeak, the onset and frequency of which can be controlled using the controls on a Stratocaster guitar. This so-called Seagull effect (because of its similarity to the cry of a seagull) was discovered by David Gilmour accidentally through accidental miswiring and used in several Pink Floyd songs, most notably in the track Echoes.

Detour

MXR knows phasers. The Phase 90's compact size, superior construction, and refined sound put MXR on the map, and it set the standard by which all other phasers are judged. Two years later, MXR released the Phase 45—a mellower version of the effect favored for its ability to easily blend into a band's mix. Now, you can get both iconic circuits in a single pedal while tightening up your pedalboard at the same time. The Phase 95 combines the Phase 45 and Phase 90 circuits in a mini housing with about half the footprint of a standard MXR pedal. The 45/90 switch toggles between the Phase 45 mode's subtle two-stage phasing and the Phase 90 mode's more pronounced four-stage phasing, while the Script switch toggles between two phasing styles. The Phase 95 is set to modern style phasing by default, which relies on feedback to create light harmonic distortion and gives the effect a more accentuated swoosh. Engaging the Script switch removes feedback for a lusher, more subdued sound with higher headroom and greater clarity. The familiar Speed control sets the rate of the effect. The Phase 95 may be small, but it's full of rich phase tones, and it'll take a beating on the road.

Product Manual 

MXR Phase 95

M290 Phase 95

Nicolas Wilfer

The DL4™ MkII includes everything in the original DL4 Delay Modeler, while introducing 15 new MkII delays drawn from our HX® family of amp and effects processors and both 4-Switch and 1-Switch loopers with up to 240 seconds of record time (expandable to several hours using an optional microSD card). There's also an XLR microphone input, MIDI In and Out/Thru connectors, heavy duty footswitches, three bypass options, and a jack for connecting an optional expression pedal or two additional footswitches. The DL4 MkII is also smaller and lighter than the original, making it an even more appealing choice for modern musicians.

LINE 6

Demo by Reverb

Review by Guitar Player

Für 20-30 FX-Pedale, 2 MOD-Slots - **1002 x 424 mm / 39.45" x 16.69"** - erhältlich mit Gig Bag oder Flight Case

For 20 - 30 FX pedals, 2 MOD slots - **1002 x 424 mm / 39.45" x 16.69"** - available with Gig Bag or Flight Case

HERMIDA AUDIO REVERB 3: Ein wunderschöner Tank.
Ein Hybrid-Hall, der das vorverzögerte Schlagen einer mechanischen Federeinheit einfängt, gemischt mit der luftigen Stimme und dem Abklingen einer Vintage-Platte.
Wir alle wissen, dass der Hermida Reverb 2 unglaublich war, und genau hier haben wir angefangen.

Wir haben die Fähigkeiten des Rev. 2 erweitert und auf Wunsch noch mehr Raum, Textur und Luft hinzugefügt. Der Reverb 3 enthält einen benutzerdefinierten, vollständigen 24-Bit-DSP-Hallgenerator, während das trockene Signal dank eines sorgfältig abgestimmten analogen Vorverstärkers und Mischverstärkers alle Nuancen und Dynamiken beibehält.

HERMIDA AUDIO REVERB 3 : A Beautiful tank.
A hybrid reverb that captures the pre-delay’d slap of a mechanical spring unit mixed with the airy voice and decay of a vintage plate.
We all know the Hermida Reverb 2 was incredible, and this is exactly where we started.

Expanding on the capabilities of the Rev. 2 we included even more space, texture and air when desired.  The Reverb 3 includes a custom, full 24-bit DSP reverb generator while the dry signal retains all nuance and dynamics as a result of a carefully tuned analog pre-amp and mix amplifier.

Demo by  Sebastian Falvo Music

Demo by Mike Hermans

Hermida Audio Reverb 3

Rubber Chicken Build Expanding on it’s original capabilities we’ve added: Sensitivity preamp, master volume control, Q adjustment and spectrum leveler makes this chicken bawk MORE!!!!!!!!!  This pedal is an extremely versatile TALK BOX! That covers a wide range of sounds from funky auto-wahs through more vocal/talk-box like tendencies.

Review by Rig-Talk

Demo by Ginda Bestari

Rubber Chicken

Das Lovepedal Eternity ist ein Overdrive-Pedal, das auf die Dynamik des Pickings reagiert und von Künstlern wie Carrie Underwood, Andy Summers von The Police und Guns N' Roses verwendet wurde. Es verfügt über Regler für Level, Drive und „Glass“ (EQ) sowie einen Drei-Wege-Schalter zwischen Standard, Boost und einer Mischung aus beiden Einstellungen.

The Lovepedal Eternity is an overdrive pedal that is sensitive to picking dynamics and has been used by artists such as Carrie Underwood, Andy Summers of The Police, and Guns N' Roses. It features controls for Level, Drive, and "Glass" (EQ), as well as a three-way switch between standard, boost, and a mix of both settings.

Demo by Sean Michael

Demo by roknfnrol

Demo by musictoyznetwork

Review by Ultimate Guitar

Review by Audiofanzine

Eternity Kanji


The Lovepedal Eternity  is one of the most natural sounding overdrives on the market.  The Eternity lives up to it's name in that it will eternally stay on your pedalboard.  The lush midrange and smooth overdrive shine beyond any mass market overdrive, distortion, or boost pedal.  The Lovepedal Eternity can stay on all the time.  Even at maximum gain you can get a  completely clean tone by just backing off the guitar volume.  Every note has it's own separate, ringing tone even at the highest gain settings.  Crank it up, play an open chord and hear each note shine!  The unique "Glass" control is a treble booster that doesn't affect any other frequencies.  This means you don't have to sacrifice low-end or midrange in order to brighten it up.  It also just adds to the diversity of this monsterous little box.  Transparency, dynamics, harmonic response, this stompbox stays on the top of the heap!  If you've tried every overdrive on the market and are still undecided, the Eternity from Love Pedal could be the one you've been looking for!