Lee Atkin

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 1 V2 ist eine Pass-Through-Box, die speziell für Gitarristen und Bassisten entwickelt wurde. Du kannst das MOD 1 V2 nutzen um mehrere Pedale deines Setups im Front End und im Effekt-Loop des Verstärkers zu postieren (4-Kabel Methode) oder die vier TRS-Anschlüsse als zentralen Zugang und Ausgang des Boards nutzen. Die XLR-Through-Verbindung kann als Signalausgang vom Pedalboard zum Mischpult oder zur PA verwendet werden.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 5 x 6,3 mm TRS thru
- 1 x XLR thru (männlich vorne / weiblich hinten)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 5 x 6,3 mm / ¼" TRS thru
- 1 x XLR thru (male front / female back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR, IEC & Barrel Patchbay

Sandbox Pedal Board

Tester

The BOSS TR-2 Tremolo is designed to provide guitarists with classic tremolo effects in an easy-to-use compact pedal. Dedicated "Wave," "Rate," and "Depth" knobs provide a multitude of effect possibilities.

BOSS

Demo by PMTVUK

Demo by  Guitars, Music and Tech

Product Page

Review by Musiker-Board

Review by Rig-Talk

Review by The Gear Check

Manual

TR-2 Tremolo

PedalSafe Type E1

QuickMount Type E

Pedal-Montageplatte für Standard-Boss-Pedale

Pedal Mounting Plate For Standard Boss Pedals

Schutzabdeckung & RockBoard-Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & RockBoard Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Schutzabdeckung & universelle Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & Universal Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Filippo Rimondi

Aria

ACH-1 Stereo Chorus

Tom Page

EVH und BOSS präsentieren das SDE-3000EVH Dual Digital Delay, eine authentische Nachbildung des Stereo-Delays, das den Live-Sound von Eddie Van Halen und seinem gewaltigen 3-Cabinet-Setup entscheidend geprägt hat. Das leistungsstarke SDE-3000EVH basiert auf dem Roland SDE-3000 Vintage-Rack-Delay und kombiniert zwei SDE-3000 in einem Bodentreter-Pedal, erweitert um vielfältige Anschlüsse für den Aufbau eines Wet/Dry/Wet-Rigs – wie bei Eddie. Darüber hinaus erhältst du acht Presets von EVH, die direkt aus seinen Delay-Units stammen. Auf diese Weise kannst du den raumgreifenden Delay-Sound des Meisters auch in deinem Setup nutzen.

EVH and BOSS join forces to bring you the SDE-3000EVH Dual Digital Delay, an authentic recreation of the stereo delays at the heart of Eddie Van Halen’s massive three-cabinet live stage guitar sound. Based on the vintage Roland SDE-3000 rackmount delay, this powerhouse processor puts two fully featured SDE-3000s in one floor-based pedal, coupled with extensive connectivity to build a wet/dry/wet rig just like Eddie’s. You also get eight presets curated by EVH with the exact settings from his actual delay units, allowing you to experience the master’s expansive spatial delay tone in your own setup.

Review by DelayDude, amazona.de

Review by Chris Gill, guitarworld.com

Demo by Simon Hosford

Demo by BOSSchannel

SDE 3000 EVH

ch ray

Musical compression and clean boost!
Our Double Classic Comp pedal has a natural sound and is very musical – much like high-end rack mounted compressors found in professional studios. Adjust the Ratio setting from moderate to heavy compression, create a very effective clean boost, or boost your amp from subtle to full overdrive [with just a few turns of the control knobs]. Using the same compressor circuit from our Joe Walsh Double Classic pedal, this pedal is acclaimed by players far and wide.

Analog Alien

Double Classic Comp

zach hultstrand

The pedal you are holding is the world’s first Augmented Analog fuzz pedal. Inside, cutting-edge
technology allows you to control, in real time, the behavior of its key internal components.
The MOHO draws inspiration from a range of fuzz classics, spanning both vintage and modern
designs. It infuses futuristic tones into the mix, inviting you on a unique sonic adventure that
combines the finesse and ferocity of renowned analog circuits in an unprecedented way

Kernom

Review by Gitarre & Bass

Review by guitar pedal X

Demo by Mike Hermans

Official Product Video

MOHO

Oscar Kezirian

In Zusammenarbeit mit Analog Man selbst entwickelt, ist Brothers AM eine Hommage an den legendären King of Tone Overdrive.

Er basiert auf der begehrten Schaltung, bietet dir erweiterte Kontrolle und ein paar spannende Extras – ohne das zu verändern, was ihn ursprünglich so besonders gemacht hat.

Ein Schub sonniger Sättigung, der einfach immer genau richtig klingt.

Made in collaboration with Analog Man himself, Brothers AM is a tribute to the legendary King of Tone overdrive.

It builds on that iconic circuit, adding deeper control and a few tasty extras—without losing the magic that made it a classic.

Think: a stack of sunny saturation that always lands in the sweet spot.

Chase Bliss

Demo by Sean Pierce Johnson

Review by Guitar Bomb

Review by Gear News

Brothers AM

Für 7-12 FX-Pedale, 1 MOD-Slot - **470 x 330 mm / 18.50" x 12.99"** - erhältlich mit Gig Bag oder Flight Case

For 7 - 12 FX pedals, 1 MOD slot - **470 x 330 mm / 18.50" x 12.99"** - available with Gig Bag or Flight Case

Michael Hodgson

The EP-25K features a 25K Ohm potentiometer that is required by some devices compared to the 10K potentiometer in the Mission EP-1. The two isolated outputs can be used to control two effects simultaneously.

The EP-25K is available in black, white and metal colors.

Mission Engineering

EP-25K Expression pedal - white

The DEEP OGGIN was designed as a collaboration with DAN COGGINS (Former LOVETONE Pedal designer) as his first modulation pedal design since his Lovetone pedal days. This fully Analog Chorus/Vibrato was designed from the ground up to provide the most incredible 3 dimensional chorus sounds with a level of versatility to meet the needs of all guitarists. Faced with hundreds of digital choruses on the market, Thorpy and Dan decided to go fully analog and deliver that vintage chorus that can only come from an analog circuit. The DEEP OGGIN is voiced to provide a variety of chorus styles from deep and wet through to more subtle and shimmery sounds.

ThorpyFX

Review by reddit /guitarpedals

Review by musicradar

Review by Guitar.com

Demo by Chris Buck

Demo by Eytschpi42

Deep Oggin

Der Thorn Steam - Flex Comp ist ein äußerst vielseitiges Kompressor-Pedal, das Gitarristen eine präzise Kontrolle über ihre Dynamik ermöglicht. Mit umfangreichen Kontrollmöglichkeiten wie Threshold, Amount, Attack, Release, Detail und Output können Sie mit diesem Pedal Ihren Ton präzise formen, egal ob Sie subtile Kompression oder eine ausgeprägte Dynamikkontrolle erreichen wollen.
Der Auto/Manual-Schalter sorgt für noch mehr Vielseitigkeit, denn er gibt Ihnen die Möglichkeit, die Attack und Release Zeiten automatisch anpassen zu lassen oder diese manuell zu verändern, um eine noch individuellere Reaktion zu erzielen.
Egal, ob Sie eine subtile Kompression oder einen ausgeprägten Effekt wollen, der Thorn Steam - Flex Comp ist ein unverzichtbares Werkzeug für Gitarristen, die ihren Sound mit dynamischer Präzision verbessern wollen.


Pedal compressors generally fall into two categories: transparent, studio-style compression and the squishy compression effect commonly associated with country music. 
The STEAM compressor effectively combines both styles while introducing some innovative features. Designed to deliver Classic Analog Tones with Refined Modern Control, it includes controls for Threshold, Amount, Attack, Release, Detail, and Output, along with a Manual/Auto mode switch. In Auto mode, the compressor dynamically adjusts to your playing by modifying the Attack and Release settings accordingly. Simply set the pedal to your preferred compression settings and let Auto mode handle the rest. 
With its intuitive controls and versatile features, the STEAM compressor is the ideal tool for musicians seeking to enhance their dynamic control and add punch to their playing.



Thorn Soundlabs

Official Product Page

This is what our pedals ACTUALLY sound like (Full Demo) | THORN SOUNDLABS

Most Flexible Pedals Yet? | Thorn Soundlabs Pedals - New at Thomann!

How to Dial in Compression with Thorn Soundlabs STEAM® Flex Comp - Demo Video - Leon Todd

 Thorn Soundlabs: STEAM® Guitar Flex-Comp - Demo Video - Brett Kingman

Meet Thorn Soundlabs! | Bad Cash Overdrive and Steam Compressor - Demo Video - Jay Leonard J

Thorn Soundlabs Steam® Flexible Compressor - Demo Video - Mike Hermans

Should THIS be your next compressor? Thorn Soundlabs Steam® Compressor - Demo Video - Pedalboards Of Doom

Am I really abandoning digital? Here's a €1500 analog pedalboard - Thorn Soundlabs - Demo Video - Gaetano lo Surdo

Jak używać kompresora do gitary (Thorn Steam - Flex Compressor) - Demo Video -  Bartosz Bazok Zelek

How to Use a Compressor for Guitar, featuring the Thorn Steam® Flux Compressor - Demo Video - Dome

Thorn Soundlabs Steam® Flex Compressor - Demo Video - Ossy Pfeiffer

Thorn Soundlabs Steam® Flex Compressor - Review by darkstars.de

Steam

Der Thorn The FreaQ - Double Stage Booster ist ein hochgradig flexibler Booster, entwickelt, um Ihrer Gitarre zusätzlichen Punch und Sound-Kontrolle zu verleihen. Mit seinen intuitiven Kontrolloptionen - Damping, Gain, Boost und Freq - können Sie mit diesem Pedal alles von subtilen Boosts bis hin zu kraftvollen Live-Sounds einstellen. Mit dem Freq-Regler können Sie einen bestimmten Frequenzbereich zur Anhebung oder Absenkung anwählen und so noch mehr klangliche Vielseitigkeit erreichen.
Der Thorn The FreaQ- Double Stage Booster ist ein unverzichtbares Werkzeug für Gitarristen, die ihren Sound auf ein neues Niveau heben wollen, egal ob sie die Lautstärke erhöhen, den Ton klarer machen oder den Frequenzgang feiner anpassen wollen.


The Thorn The FreaQ – Double Stage Booster is a highly flexible booster pedal designed to provide an extra punch and tonal control for your guitar. With its intuitive controls—Damping, Gain, Boost, and Freq—this pedal allows you to dial in everything from subtle boosts to powerful, stage-ready tones. The Freq control lets you fine-tune a targeted frequency range of additional boost or cut, offering even more tonal versatility.
The Thorn The FreaQ – Double Stage Booster is a must-have tool for guitarists who want to push their sound to new levels, whether boosting volume, adding tonal clarity, or fine-tuning the frequency response.



This is what our pedals ACTUALLY sound like (Full Demo) | THORN SOUNDLABS 

 Most Flexible Pedals Yet? | Thorn Soundlabs Pedals - New at Thomann!

 Thorn Soundlabs The Freaq - Demo Video - Mike Hermans

 This Pedal Made Me Stop Scooping My Mids - Thorn Freaq Pedal - Demo Video - Jamie Slays

 The Boost I Needed - Thorn Soundlabs FreaQ - Review Video - Leigh Fuge

Pedals That Are More Flexible Than The Player 😮 | Thorn Soundlabs Magma & FreaQ - Demo Video - Kris Barocsi

Thorn The Freaq Double Stage Booster Guitar Gear Test - by Darkstars

 Is The FreaQ Pedal Really That Cool? - Review Video - The Distortion Principle

Thorn The FreaQ - This Boost Cuts Through The Mix - Demo Video - The Studio Rats

Thorn The FreaQ Double Stage Booster & Bad Cash Flex Drive,  review - Gitarre & Bass

The FreaQ

FRV-1 Fender Reverb

Alejandro Garcia Iglesias

Developed on an incredibly powerful DSP (which is often used in modular synthesizers industry more than the effects pedals one), RICORDA provides a multitude of parameters for sculpting and shaping the reverberant space. From controlling the density and size of the grains to modulating their feedback and stereo spread, the possibilities for sonic exploration are virtually limitless. With each adjustment, the reverberant environment evolves by revealing new dimensions and sonic possibilities, also thanks to the freeze/loop feature and the “hidden” secondary mode as well.

AC Noises

Demo by collector//emitter

Review by delicious audio

Manual download

Ricorda

RockBoard

ISO Power Block V10

chris brooks

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 2 V2 wurde als Patchbay speziell für MIDI-basierte Setups, Verstärker und Geräte sowie eine USB-Verbindung zwischen Pedalboard und Computer oder Soundkarte entwickelt. Mit vier TRS-Through-Verbindungen lässt sich das MOD 2 V2 perfekt in True Stereo Setups von Keyboards oder Synthesizern integrieren oder als zentraler Zugang und Ausgang des Boards nutzen. Alternativ lassen sich Effektpedale im Front End und im Effekt-Loop des Verstärkers postieren (4-Kabel Methode).
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 4 x 6,3 mm TRS thru
- 2 x 5-pin DIN MIDI thru
- 1 x USB Type A thru
- 1 x DC 2,1 x 5,5 mm Hohlstecker thru
- 1 x AC IEC thru (männlich vorne / weiblich hinten)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 420 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 2 V2 is a pass-thru box especially designed for MIDI-controlled amplifiers and devices, USB connections to a computer, or a sound card. The 4x TRS thru connections will also work great for true stereo setups with keyboards or synthesizers. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 4 x 6,3 mm / ¼" TRS thru
- 2 x 5-pin DIN MIDI thru
- 1 x USB Type A thru
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 420 g / 0.93 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS, MIDI & USB Patchbay

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 3 V2 ist eine Patchbay für Sänger und Akustik-Musiker. Über die zwei XLR-Ausgänge kannst du ein Stereo-Signal von dein MOD senden und an den XLR-Eingang lässt sich ein Mikrofon anschließen. Mit drei TRS-Through-Verbindungen lässt sich das MOD 3 V2 außerdem als zentraler Zugang und Ausgang des Boards nutzen um zum Beispiel Effektpedale in den FX-Loop eines Verstärkers einzuschleifen.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 3 x 6,3 mm TRS thru
- 2 x XLR thru (männlich vorne / weiblich hinten)
- 1 x XLR thru (weiblich vorne / männlich hinten)
- 1 x DC 2,1 x 5,5 mm Hohlstecker thru
- 1 x AC IEC thru (männlich vorne / weiblich hinten)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel


The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 3 V2 is a pass-thru box designed for use by vocalists and acoustic players. The 2x XLR outputs allow you to send a stereo signal from your MOD and the 1x XLR input can be used to connect your microphone. You can also use it to run several pedals from your board through the effects loop of your amp, or simply use the MOD as a central access point to your pedalboard.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 3 x 6,3 mm / ¼" TRS thru
- 2 x XLR thru (male front / female back)
- 1 x XLR thru (female front / male back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR Patchbay for Vocalists & Acoustic Players

MOther ship

Josh Yang

The DAILY DRIVER® Overdrive features an original and unique drive circuit that gives you a rich sound full of harmonics and an amp like response, it features low and high eq controls along with a three position high cut toggle switch that lets you dial in the perfect overdrive sounds no matter what amp you are plugging into

The gain ranges from a clean mild  to a medium gain overdrive sound with the most drive harmonics at maximum gain. 

Shnobel Tone

Demo by Buddy Blues

Review by The Gear Page

daily driver

Isen Ritchie

Unleash your dark side with the limited run H90 Dark Harmonizer®. This exclusive edition brings Eventide’s most powerful effects pedal in a bold new look. With only a limited number available, this H90 won’t last long.

Whether you want high-quality bread-and-butter effects or experimental sounds unheard, the H90 has everything you need to inspire your creativity with an intuitive UI designed with players in mind, 66 effect algorithms, and hundreds of Program combinations curated for a variety of instruments and genres. With its comprehensive I/O and flexible routing options, the H90 is designed to be the heart of your rig.

Eventide

Demo by Emily Hopkins

Review by TAPE OP

Review by AMAZONA

Manual Page

H90 Dark Harmonizer

Adzim Ezani

HX® One is a powerful stereo effect pedal in an ultra-compact enclose that easily fits onto any pedalboard. It features intuitive controls, 250+ effects taken from HX family processors, a unique Flux Controller, a jack for connecting an optional expression pedal or two footswitches, adjustable input impedance, MIDI capabilities, and a choice of true or buffered DSP bypass.

LINE 6

Demo by Line 6

HX One

QuickMount Type C

Pedalmontageplatte für große vertikale Pedale

Pedal Mounting Plate For Large Vertical Pedals

Teddy McBride

Der weltbeste Octave-Effekt ist jetzt noch besser! Der POG3 ist das leistungsstärkste Pedal in der renommierten Reihe polyphoner Octave-Generatoren von Electro-Harmonix und inspiriert weiterhin Musiker aller Stilrichtungen.  

Im Kern bietet der POG3 blitzschnelles Tracking und perfekte Polyphonie über vier Oktaven – mit noch geschmeidigerem Klang und besserer Performance als je zuvor. Von 12-saitigem Jangle bis hin zu sechsstimmigen Drawbar-Orgel-Sounds eröffnet der POG3 endlose Möglichkeiten der Klanggestaltung.  

Das Pedal wurde mit zahlreichen Updates ausgestattet, die seine klanglichen Anpassungsmöglichkeiten weiter erweitern – für eine noch beeindruckendere Performance auf der Bühne und im Studio.

The world’s best octave effect just got better! The POG3 is the most powerful pedal in Electro-Harmonix’s revered line of polyphonic octave generators that continues to inspire and captivate musicians of all styles. At its core, the POG3 delivers lightning-fast tracking and perfect polyphony over 4 octaves with smoother tone and performance than ever before. From 12-string jangle to 6-voice drawbar organ sounds, the POG3 delivers an endless possibility of tone creation. The pedal has received many updates that further expand its tone shaping possibilities to enhance your performance on stage and in the studio.

Electro-Harmonix

Review by Guitar Pedal X

Review by Guitar World

Demo by Pete Thorn

Demo by 

POG 3

Peter  Widmer

TONEX Pedal is the ultimate amp and distortion stompbox pedal, using IK’s breakthrough AI Machine Modeling  technology (AIMM™). Play on stage with hundreds of included TONE MODEL rigs, your own generated ones,
or an unlimited number from a community of users. Or use the same exact TONE MODELs in the studio with
TONEX plug-in, TONEX for Mac/PC and TONEX amp and pedal inside AmpliTube 5.

IK Multimedia

Review by bonedo

Demo by Reverb

Demo by Mike Hermans 

Demo by Home StudioSimplified

TONEX (black)

Als wir uns entschieden, ein Stereo-Delay-Effektpedal in Studioqualität zu entwickeln, wussten wir, dass wir weit über das bisher Erreichte hinausgehen mussten – in Sachen Klangqualität, klanglicher Flexibilität, Hardware-Design und Verarbeitungsleistung. Wir verbrachten Monate in den Sounddesign-Laboren von Strymon und träumten von den geräumigsten, üppigsten, kreativsten und anpassbarsten Delay-Effekten, die man je gehört hat. Es war eine monumentale Aufgabe – ein unermüdliches Studium von Delays und ihren Nuancen und ein kontinuierliches Streben nach innovativen und musikalisch inspirierenden Klängen. Durch die Verwendung eines unglaublich leistungsstarken SHARC DSP wird jedes bisschen Verarbeitungsleistung genutzt.

TimeLine bietet Ihnen zwölf einzigartige Delay-Maschinen, jede mit umfassender Kontrolle über Klangcharakter und -gefühl. Gehen Sie von knackigen und klaren digitalen Delays in Studioqualität bis hin zu den gesättigten und schwankenden Klängen von Band-Delay-Maschinen. Erhalten Sie warme und unscharfe Wiederholungen im analogen Stil bis hin zu schimmernden, funkelnden und kristallinen Eis-Delays.

Optimieren Sie nach Herzenslust und speichern Sie bis zu 200 Voreinstellungen Ihrer Lieblingssounds. Krönen Sie das Ganze mit einer vollständigen MIDI-Implementierung und einem routingfähigen 30-Sekunden-Stereo-Looper und schon sind Sie auf dem Weg zum Delay-Glück.

When we decided to create a studio-class stereo delay effects pedal, we knew we must go well beyond what has been done in the past—in sound quality, sonic flexibility, hardware design, and processing power. We spent months locked up in the Strymon sound design labs dreaming up the most spacious, lush, creative, and tweakable delay effects ever heard. It was a monumental task—a relentless study of delays and their nuances, and a continuous pursuit of innovative and musically inspirational sounds. Utilizing a ridiculously powerful SHARC DSP, every drop of processing power is harnessed.

TimeLine provides you with twelve unique delay machines, each with extensive control over sonic character and feel. Go from crisp and clear, studio-quality digital delays all the way to the saturated and fluctuating sounds of tape delay machines. Get warm and fuzzy analog style repeats all the way to shimmery, sparkling, and crystalline ice delays.

Tweak to your hearts content and save up to 200 presets of your favorite sounds. Top it all off with full MIDI implementation and a routable, 30-second stereo looper and you’re on your way to delay bliss.

Strymon

Demo by shnobel

Review by Amazona 

Timeline

chris wilson

You always wanted to have the perfect, organic drive tone. Jump into the Kernom world and take your creativity to the next level with the RIDGE.
No matter if you are looking for an overdrive to play blues or heavy guitar riffs, the MOOD knob on the RIDGE is an intuitive and unique way to access all clipping flavors : symmetrical, asymmetrical, soft or hard clipping, and everything in between. 

Demo by Tone Factory

Demo by Andertons

Ridge

Say hello to the world’s most compact reorderable audio loop switcher.

A fully analog stereo loop switcher designed to break boundaries. 
Each stereo loop can be broken up into 2x mono loops with an Y-cable and in the looper used as 2x complete independent mono loops (Y-TRS-Cables). As these cannot be displayed in this tool (but often used to double the loops on big boards) we configured in this tool 3 stereo connections as 6x mono loops. 

ML10X is the answer for today's musicians.

Morningstar Engineering

Review by 

ML10X (5 Stereo Loop)

Greg Dunn

The new pinnacle of what a reverb pedal can be has arrived.
In BigSky MX, raw computational power meets innovative design and consummate sonic craftsmanship to give you positively sublime reverbs with stunning new levels of richness and complexity.
These are sounds to inspire new creative works and endless hours of playing.

BigSky MX features a staggering amount of computing power — it uses a high performance tri-core 800 MHz ARM processor — all dedicated to producing truly breathtaking reverbs. Our new reverb algorithms were meticulously created by hand, and then a state-of-the-art gradient descent optimization algorithm was used to dial out any undesirable ringing or artifacts. 

Review by Synth Anatomy

BigSky MX

Joaquin Berrolo

Line 6 have been at the forefront of the digital modelling world for over 20 years now, pushing the boundaries of guitar technology is nothing new for them and their flagship product, the Helix, has taken the guitar world by storm. With the scaled down Helix, the HX, becoming a go to for players, its latest version, the HX Stomp is sure to generate loads of interest!

The HX Stomp is the ultimate streamlined version of this superstar pedal. Constructed as a 3 pedal unit, the HX Stomp features the same processor as the Helix, meaning you get over 300 effects including legacy lines from the M Series, 8 simultaneous amp, cab and effects blocks, TRS dual expression pedal inputs and a stereo effects loop, it's a serious pedal!

Demo by Guitar Bonedo

HX Stomp Blue Limited Edition

PedalSafe Type L6

QuickMount Type L6

Pedal-Montageplatte für LINE6 HX Stomp Pedale

Pedal Mounting Plate for LINE6 HX Stomp pedals

Schutzabdeckung & RockBoard-Montageplatte für LINE6 HX Stomp Pedale

Protective Cover & RockBoard Mounting Plate For LINE6 HX Stomp pedals

Schutzabdeckung & universelle Montageplatte für LINE6 HX Stomp Pedale

Protective Cover & Universal Mounting Plate For LINE6 HX Stomp pedals

Patrick Dougherty

Der Morningstar Engineering MC6 Pro ist ein hochentwickelter, voll programmierbarer MIDI-Fußcontroller, der für komplexe Pedalboard- und Studiointegrationen konzipiert wurde. Er verfügt über drei hochauflösende Farb-LCD-Bildschirme, die ein dynamisches visuelles Feedback bieten, einschließlich anpassbarer Farbstreifen und Schriftgrößen zur Identifizierung von Presets. Die umfangreiche Ausstattung umfasst vier Omniports, duale Relais-Schaltanschlüsse sowie USB-C-Device- und Host-Ports für den direkten Anschluss von MIDI-USB-Hardware. Der interne Prozessor ermöglicht ein anspruchsvolles Message-Stacking, wobei jedes der 3.072 verfügbaren Presets bis zu 32 gleichzeitige MIDI-Befehle senden kann. Der Controller ist in einem robusten Gehäuse aus sandgestrahltem Aluminium mit sechs Soft-Touch-Fußschaltern untergebracht.

The Morningstar Engineering MC6 Pro is a highly advanced, fully programmable MIDI foot controller designed for complex pedalboard and studio integration. It features three high-resolution color LCD screens that provide dynamic visual feedback, including customizable color strips and font sizes for preset identification. The unit's extensive I/O includes four Omniports, dual relay switching ports, and both USB-C Device and Host ports for direct connection to MIDI-USB hardware. Its internal processor allows for sophisticated message stacking, with each of its 3,072 available presets capable of sending up to 32 simultaneous MIDI messages. The controller is housed in a durable bead-blasted aluminum enclosure with six soft-touch footswitches.

Morningstar Product Page

Review by Gearspace

Review by Six String Sensei

Demo by SON WU

MC6 Pro

Thomas Kollakowski

Tone Master Pro ist unsere erste Multi-Effekt-Workstation für Gitarristen. In ihr stecken der Sound und die hohe Qualität der Tone Master Serie. Die Arbeitsoberfläche erfordert kein Computer-Gefrickel, sondern ist intuitiv bedienbar und verfügt über umfangreiche I/O-Berbeitungsmöglichkeiten. Damit ist die Tone Master Pro der am besten klingende, leistungsstärkste und userfreundlichste Gitarrenprozessor im Markt.

In the world of guitarists, we often encounter opinions that label amp modelers as "too artificial" or "cheating." However, it's essential to acknowledge that, for certain players, utilizing one is simply the right decision. The undeniable ease of operation, extensive options that modelers offer, and their sheer compact size compared to other gear are only some of the compelling reasons to embrace them. Fender's latest release, the Tone Master Pro, not only encompasses these advantages but elevates them to a new level.
From searing overdriven to smooth and creamy tones, with the Tone Master Pro, finding what you’re looking for is really as simple as pushing some buttons, learning the interface, and getting weird. From the moment we plugged in, the Tone Master Pro was shockingly simple to use and redefined what we thought was possible from a multi-effects guitar workstation. The array of over a hundred world-class amps and effects offered us an incredible user experience, but it wasn’t just the sound; the full-color touchscreen and wildly easy to use interface made tweaking settings and creating presets a genuinely inspiring experience. And we need to mention the design – it’s a stage-friendly, lightweight gem that looks just as good as it works. Navigating through the settings felt like playing with a physical amp, only this time, the possibilities were limitless.