atakan germiyanoğlu

GermiyanBass

David Graves

Ausgestattet mit einer bassspezifischen Tuner-Schaltung für präzises Stimmen, selbst bei tiefen Frequenzen  
ULTRA BUFFER-Technologie, optimiert für Bass und umschaltbar auf True Bypass  
Einzigartiges Design mit großem Display in kompakter Größe  
Hohe Sichtbarkeit dank einstellbarer Helligkeit der Meter-LEDs  
Ultrapräzises Stimmen bis auf ±0,1 Cent genau  
Vier verschiedene Anzeigemodi

Equipped with a bass-specific tuner circuit for precise tuning, even at low frequencies
ULTRA BUFFER technology optimized for bass and switchable to true bypass
Unique design with a large display in a compact size
High visibility with meter LEDs which brightness can be adjusted
Ultra-precise tuning down to ±0.1 cents
Four meter display modes

KORG

Product Page

Review by recording.de

Review by bonedo

Manual

Demo by Musiker TV

Pitchblack XS Bass

Ron Bakalik

The Ground & Pound has been designed to combine the two pedals that Justin Chancellor uses to help achieve his signature distorted tone, the Turbo Rat with the Bass EQ, and it successfully combines them into a single box with a very compact and easy to use control layout.

We’ve also added a blend control, labelled ‘Mix‘,  which has a very musical compression ratio (2:1) on the clean signal. This mixes very well with the distorted sound and just adds to the overall playing experience.

Lusithand

Review by No Treble

ground and pound

ch ray

Quad Cortex ist der leistungsstärkste Floor-Modeler der Welt. Mit insgesamt 6 Kernen (4x SHARC+ und 2x ARM Cortex-A5 mit jeweils 500 MHz) eröffnet diese unglaubliche Rechenleistung grenzenlose Möglichkeiten im Bereich des Sounddesigns.

Quad Cortex is the most powerful floor modeler on the planet. With a total of 6 cores (4x SHARC+ and 2x ARM Cortex-A5 running at 500MHz each), this ludicrous amount of processing capacity provides limitless sound design possibilities.

Neural DSP

Review by wired

Review by The Gear Page

Review by Fractal Audio Forum

Review by guitarguitar

Quad Cortex 2.0 manual

Demo by EytschPi42

Demo by Neural DSP

Quad Cortex

PedalSafe Type NRL

QuickMount Type NRL 

Pedal-Montageplatte für das NEURAL DSP Quad Cortex Pedale

Pedal Mounting Plate for the NEURAL DSP Quad Cortex pedal

Schutzabdeckung & RockBoard-Montagep für NEURAL DSP Quad Cortex Pedal

Protective Cover & RockBoard Mounting Plate For NEURAL DSP Quad Cortex pedal

Schutzabdeckung & universelle Montageplatte für NEURAL DSP Quad Cortex Pedal

Protective Cover & Universal Mounting Plate For NEURAL DSP Quad Cortex pedal

Michael Hodgson

The EP-25K features a 25K Ohm potentiometer that is required by some devices compared to the 10K potentiometer in the Mission EP-1. The two isolated outputs can be used to control two effects simultaneously.

Mission Engineering

Demo by Sean Pierce Johnson

EP-25K Expression pedal

Tim Rilke

The new DSM & Humboldt SIMPLIFIER BASS STATION is everything you ever needed to go direct to the FOH or recording amazing bass tones without sacrificing anything.  It includes a Bass Preamp with gain, level, and a 3 band EQ with semi-parametric mid control. A parallel signal routing with a selectable LPF, dual FX loop (for preamp and parallel signal), and an amazing analog cabinet simulation, based on the acclaimed Omnicabsim ® by DSM Noisemaker.

DSM & Humboldt

Official Product Video

Demo by benjudbass

Demo by Diego Ibarra

Demo by Bass Bonedo

Simplifier Bass Station

Tester

The new GLX-D+ Wireless Guitar Pedal System features the WA305 Premium Guitar Cable, the GLXD1+ Digital Bodypack, and the GLXD6+ Guitar Pedal. Go wireless without compromising your tone or complicating your rig.

Shure

Review by Premier Guitar

Review by Guitar World

Demo by Basscoach Denis Busch

GLXD16+

CIOKS

Crux

Für 7-12 FX-Pedale, 1 MOD-Slot - **598 x 236 mm / 23.54" x 9.29"** - erhältlich mit Gig Bag oder Flight Case

For 7 - 12 FX pedals, 1 MOD slot - **598 x 236 mm / 23.54" x 9.29"** - available with Gig Bag or Flight Case

Alex Pini

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 1 V2 ist eine Pass-Through-Box, die speziell für Gitarristen und Bassisten entwickelt wurde. Du kannst das MOD 1 V2 nutzen um mehrere Pedale deines Setups im Front End und im Effekt-Loop des Verstärkers zu postieren (4-Kabel Methode) oder die vier TRS-Anschlüsse als zentralen Zugang und Ausgang des Boards nutzen. Die XLR-Through-Verbindung kann als Signalausgang vom Pedalboard zum Mischpult oder zur PA verwendet werden.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 5 x 6,3 mm TRS thru
- 1 x XLR thru (männlich vorne / weiblich hinten)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 5 x 6,3 mm / ¼" TRS thru
- 1 x XLR thru (male front / female back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR, IEC & Barrel Patchbay

My PedalBoard

Der NS-2 eignet sich hervorragend, um Signal-Rauschen und lästige Brummgeräusche zu eliminieren, wobei der Klangcharakter des originalen Eingangssignals unberührt bleibt. Attack und Hüllkurve des Signals werden in keinster Weise beeinträchtigt, dank eines von BOSS entwickelten, einzigartigen Noise Detection-Schaltkreises, der den Gitarrenklang präzise von sämtlichen Störgeräuschen zu separieren vermag.

The NS-2 Noise Suppressor eliminates unwanted noise and hum without altering an instrument's natural tone. It's the perfect pedal to quiet down any pedalboard or effects setup.

BOSS

Demo by  Charly G.- Sound & Demo

Demo by Riffs, Beards & Gear

Review by Musiker-Board

Review by reddit /guitarpedals

Review by Pedal Authority

NS-2 Noise Suppressor

PedalSafe Type E1

QuickMount Type E

Pedal-Montageplatte für Standard-Boss-Pedale

Pedal Mounting Plate For Standard Boss Pedals

Schutzabdeckung & RockBoard-Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & RockBoard Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Schutzabdeckung & universelle Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & Universal Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

David Litaba

The Microtubes B1K is a phenomenal tribute to one of our most legendary distortion circuits in a compact and intuitive format. We are proud to introduce our Microtubes B1K distortion pedal, the first of its kind from an all-new lineup.

Darkglass Electronics

Demo by The Bass Channel

Review by Rainer Wind, bonedo.de

Review by Kevin Johnson, notreble.com

Review by stephan, gearnews.de

Demo by patrick hunter 

Microtubes B1K

The Microtubes Vintage is our tribute to some of the most legendary sounds in rock history. It provides warm tube-like tones with a natural dynamic response that echoes the organic compression of old tube amps and reel-to-reel tape machines.

Demo by  Prymaxe

Demo by  Musicmaker

Review by Steve Cook, premierguitar.com

Demo by amosheller 

Demo by the bass channel 

Vintage Microtubes

Der Keeley Bassist Compressor liefert echte Hi-Fi Kompression und Limiting. Er ist um den exotischen und extremen Hi-Fi THAT Corp. 4320 gebaut. Sieh ihn als sehr leistbaren Kompressor mit Studioqualität im Bodentreterformat! Er nutzt Hochleistungs-Spannungsgesteuerte-Verstärker (VCAs), echte on-board RMS-Detektoren, Ultrahochleistungs-OP-Amps um die beste Soundqualität zu gewährleisten. VCA Compressoren bieten prezise Kontrolle. Deswegen eignen sie sich speziell für E-Bässe. 
Der Keeley Bassist Compressor ist musikalisch und transparent. Wo ältere Kompressoren auf den CA3080 oder LM13700 aufgebaut waren und perfekt für Single Coil Gitarren waren, hat der neue Keeley Bassist Compressor keine Probleme mit aktiven Pre-Amps und Line-Level Ausgangssignalen!
Nicht nur kann er erstaunlich starke Signale verarbeiten, er hat eine unglaubliche Bandbreite von über 20 KHz und ist extrem rauscharm. 
Kein Detail im Bass-Sound geht verloren. Der Keeley Bassist ist eine Investition mit Rack-Qualität in den Sound für das Pedalboard.

The Keeley Bassist Compressor provides true high-fidelity compression and limiting. Be heard and felt using performance compression by Keeley Engineering.

The Bassist Compressor is built around the exotic and extremely high fidelity THAT Corp. 4320.  Think of it as very affordable studio-grade compressor in stomp box format!  It uses high performance Voltage Controlled Amplifiers, on board true-RMS detector, and ultra high performance op-amps to bring you the very best quality. VCA compressors give you precise control.  Therefore they are directly suited to bass guitars. The Keeley Bassist Compressor is both musical and very transparent.  Where our older compressors were based on the CA3080 or the LM13700 and are perfect for single coil guitars, the new Keeley Bassist Compressor has no problems with active pre-amps and line level input signals!  Not only can the Keeley Bassist handle astonishingly large signals, it has an incredible bandwidth of over 20 KHz and incredibly low noise.  No detail in your bass guitar’s tone will be lost.  The Keeley Bassist will be a sound investment in your tone, you now have rack-mount quality at your feet.

Keeley Electronics

Official Product Page

Keeley Bassist Limiting Amplifier - Demo Video - Mike Hermans

Keeley Bassist Limiting Amplifier - Review by Bass Professional [DE], [01-2019]

Keeley Bassist Limiting Amplifier - Review by Muzikus [CZ]

Keeley Bassist Limiting Amplifier - Review by Gitarre & Bass [DE]

Keeley Bassist Limiting Amplifier - Review by Bonedo [DE]

Bassist Compressor

PedalSafe Type A1.1

QuickMount Type A

Pedal-Montageplatte für Standard-Einzelpedale

Pedal Mounting Plate For Standard Single Pedals

Schutzabdeckung & RockBoard-Montageplatte für MXR® Standardgröße und Dunlop® Echoplex Delay Pedale

Protective Cover & RockBoard Mounting Plate For MXR® standard size and Dunlop® Echoplex Delay pedals

Schutzabdeckung & universelle Montageplatte für MXR® Standardgröße und Dunlop® Echoplex Delay Pedale

Protective Cover & Universal Mounting Plate For MXR® standard size and Dunlop® Echoplex Delay pedals

Der MXR Bass Chorus Deluxe basiert auf reiner analoger Bucket-Brigade-Technologie, die schimmernde, flüssige Chorus- und rauschende, metallische Flanger-Effekte liefert und dabei den Punch und das Fundament deines Low Ends bewahrt.

Der Bass Chorus Deluxe verfügt über Flanger- und X-Over-Tasten auf der Oberseite mit LED-Statusanzeigen. Im X-Over-Modus wird die Modulation in den tiefen Frequenzen auf 100 Hz abgesenkt - perfekt für das Spielen von Akkorden, Melodien und Fills in den oberen Registern, während die tiefen Frequenzen in der richtigen Stimmung bleiben. Mit den Reglern für Bass und Treble können Sie die Tiefen und Höhen absenken oder anheben und den Klangcharakter des Effekts gestalten. Für einen breiten Stereosound können Sie über einen internen Schalter den TRS (Tip-Ring-Sleeve) Stereo Hardwire Bypass Mode wählen. In diesem Modus können Sie ein TRS-auf-TS-(Tip-Sleeve)-Y-Verteilerkabel verwenden, um das Effektsignal an zwei verschiedene Verstärker zu senden, so dass die Modulation von links nach rechts wandern kann.

The MXR Bass Chorus Deluxe is powered by pure analog bucket-brigade technology, serving up shimmering, liquid chorus and swooshing, metallic flanger effects while preserving the punch and fundamental of your low end.

The Bass Chorus Deluxe features top-mounted Flanger and X-Over buttons with LED status indicators. In X-Over Mode, modulation in low frequencies is decreased at 100Hz—perfect for playing upper register chords, melodies and fills while keeping the low end in tune. With Bass and Treble controls you can cut or boost lows and highs and shape the tonal character of the effect. For a wide stereo sound, select the TRS (tip-ring-sleeve) Stereo Hardwire Bypass Mode via an internal switch. In this mode, you can use a TRS to TS (tip-sleeve) Y-splitter cable to send the effect signal to two different amplifiers, allowing the modulation to move from left to right.

Review by Basschat

Review by Talk Bass.com

Review by Bonedo

M83 Bass Chorus Deluxe

Tom Page

Der GEC5-Link ist ein Looper/Switcher mit integrierter Link-Funktion zur Erweiterung und Verbindung mehrerer Einheiten. Er bietet fünf sequentielle Loops mit Relais True Bypass Schaltung. Er speichert bis zu 200 Presets auf fünf Spuren und zehn Bänken bei klarer Benutzeroberfläche. Er besitzt ein eingebautes Input-Buffer und unterstützt Master-Bypass per Doppeltipp. Die Link-Ports ermöglichen das Teilen von Einstellungen oder das Ketten von Loops über mehrere Geräte. Die Abmessungen betragen 330 × 50 × 51 mm und machen ihn schlank und pedalbretttauglich.

The GEC5-Link is a loop switcher with native Link capability to cascade and expand control across units. It offers 5 sequential loops with relay true bypass switching. It stores up to 200 presets across 5 lanes and 10 banks with a clear interface. It includes an onboard input buffer and supports master bypass via double-press. Its Link ports allow multiple units to share settings or chain loops. The dimensions are 330 × 50 × 51 mm, making it slim and pedalboard-friendly.

Moen

Official Product Video 2

Official Product Video 1

Gec5-link

Teeratai Kaewmanee

The greatest pieces of studio gear studio gear are the ones that add something special to the sound of an instrument, going beyond the job they were designed for and enhancing anything that passes through the circuit. One such piece is the UA 610 preamp, which was the inspiration for the DCX Bass. This retro console preamp is famous for adding vintage, analogue colour to a signal, as well as precise control of level and EQ. Push the level harder and you get rich, harmonic saturation of the kind that makes analogue hardware a must-have in any present-day studio.

The DCX Bass reimagines this classic preamp as a tone-shaper and drive pedal for bass guitar, with a wide range of clean and overdrive tones, EQ frequencies optimised for the instrument, and our Adaptive Circuitry providing a treble response that reacts to playing dynamics. It’s a signal-boosting, tone-enhancing pedal straight from the studio!

Origin Effects

Review by reddit /basspedals

Review by Gitarre & Bass

Demo by Nate Navarro

Sound Samples w/ Ian Martin Allison

DCX BASS

QuickMount Type B

Voodoo Lab

Pedal Power x8

Für 5-10 FX-Pedale, 1 MOD-Slot - **442 x 236 mm / 17.40" x 9.29"** - erhältlich mit Gig Bag oder Flight Case

For 5 - 10 FX pedals, 1 MOD slot - **442 x 236 mm / 17.40" x 9.29"** - available with Gig Bag or Flight Case

Diego Jose De Leon Wug

SR2600

Amp Replacement Full-TwoNotes-copy

Rusty Singleton

ME-90B Bass Multi-Effects Processor

MultiComp Blue Label

Christian Wistl

Bass is the bedrock of your band, and the Two Notes ReVolt Bass's all-analog signal path, complete with a 12AX7 preamp tube — run at a healthy 200V — ensures a stand-out sound in any application. The ReVolt Bass's three channels deliver the full gamut of tones, from high-headroom cleans to old-school dirt to modern drive. You also get an integrated Dry/Wet blend for extra tone-shaping power. An analog speaker simulation ensures a polished, miked-cab sound, both onstage and in the studio. Integrating the ReVolt Bass with the rest of your rig is a cinch, thanks to a 4-cable mode, an FX loop, and MIDI I/O. This bass preamp pedal also includes a collection of ten DynIRs for situations where you need more DI flexibility. Bassists searching for a robust, made-to-move solution for their pedalboards and fly rigs will get tons of mileage out of the Two Notes ReVolt Bass.

Two Notes Audio Engineering

Review by Sound on Sound

Demo by Sweetwater

ReVolt Bass

Das neue Skysurfer-Mini-Reverb-Pedal bietet TC Electronics beliebten und erschwinglichen Effekt in einem wesentlich kleineren Gehäuse. Es ist mit drei Reverb-Algorithmen in Studioqualität ausgestattet.

SKYSURFER MINI REVERB brings you a premium – yet affordable, reverb solution armed with 3 studio-grade algorithms created by TC Electronic and housed in a compact, rugged metal box. Skim effortlessly across a deep-blue, churning ocean; swim in a cavernous grotto; or soar through the ambient spray of the surf.

TC Electronic

Review by Gitarre & Bass 

Demo by Music Bliss Malaysia

Skysurfer Mini Reverb

We have had many requests for a more straight sounding delay pedal that is clearer and more true to the incoming guitar signal. By using new hardware, we not only created a very studio-like sounding delay, but we were able to increase the delay time to a maximum of 3 seconds. It sounds more modern and it doesn´t distort or warble – it merely sends out what you put in, only a little later and in a very pleasing way.
Just like all our other delays, the dry signal is kept analog, so there is no latency or coloring from the converters to the dry signal.

T-Rex

Review by Pedal of the day

Review by Trevor Curwen

Demo by Pedal of the Day

Replay Box

QuickMount Type UH

Universal-Pedal-Montageplatte für horizontale Pedale

Universal Pedal Mounting Plate For Horizontal Pedals

RockBoard

ISO Power Block V6 IEC

Für 4-7 FX-Pedale - **470 x 142 mm / 18.50" x 5.59"** - erhältlich mit Gig Bag oder Flight Case

For 4 - 7 FX pedals - **470 x 142 mm / 18.50" x 5.59"** - available with Gig Bag or Flight Case

Gus  McDonald

Clarence

p bass

Do yer mother fokkin job!

littlemark III

Rean D.

PedalBot

PB Pick Tin Can

EarthQuaker Devices

Blumes, Ruby Citron (Sweetwater Exclusive)

DC-2W Dimension C (Waza Craft)

There are few compressors that are more sought after than our yellow box Diamond. This next-gen compressor maintains the classic circuit architecture while increasing range and functionality. The new EQ section allows you to sculpt your tone in the same box that squashes it (that’s a good thing). Furthermore, the attack switch allows you to go from the signature ultra-snappy Diamond comp style all the way to softer transparent compression.

Diamond Pedals

Review by thegearpage

Demo by BassTheWorld

Demo by Pedalboard of the Day

Diamond Bass Compressor EQ

Der EHX Bass Micro Synthesizer ist ein reiner Bassgitarren-Synthesizer mit vollständig analoger Schaltung. Einstellbare Synthesizer-Parameter erzeugen satte, kraftvolle Klänge aus einer anderen Welt.  

Die Voice-Mix-Sektion ermöglicht die Mischung aus vier verschiedenen Stimmen: Sub-Octave, Guitar, Octave und Square Wave. Besonders die Square Wave sorgt für den charakteristischen, fuzzigen Klang des Bass Micro Synthesizers, der an den kosmischen Sound der 70er Jahre erinnert.  

Mit der Attack-Decay-Steuerung lassen sich gestrichene Effekte oder bedrohliche Lautstärkeschwankungen erzeugen, während die Filter-Sweep-Sektion das gesamte Frequenzspektrum durchläuft – von schnellen, präzisen Schnitten von Hoch nach Tief bis hin zu langsamen, fließenden Anstiegen von Tief nach Hoch.

The EHX Bass Micro Synthesizer is a pure bass guitar synthesizer with all analog circuitry. Adjustable synth parameters deliver fat, sweet tones from another world.

Its voice mix section lets you bring in 4 different voices: Sub Octave, Guitar, Octave, and Square Wave. The Square Wave gives the Bass Micro Snythesizer its signature, fuzzy growl that calls back to the cosmic ’70s .

An Attack Decay control creates bowed effects or ominous volume swells while the Filter Sweep section sweeps through the full frequency spectrum for sound from quick high to low chops and slow low to high blooms.

Electro-Harmonix

Review by Pedals & Effects

Review by Bass Gear Reviews

Demo by Bassic Gear Reviews

Bass Micro Synth

PedalSafe Type O

QuickMount Type O

Pedal-Montageplatte für FRIEDMAN Overdrive Deluxe & WALRUS Descent Pedale

Pedal Mounting Plates for FRIEDMAN Overdrive Deluxe & WALRUS Descent pedals

Schutzabdeckung & RockBoard-Montageplatte für FRIEDMAN Overdrive Deluxe & WALRUS Descent Pedale

Protective Cover & RockBoard Mounting Plate For FRIEDMAN Overdrive Deluxe & WALRUS Descent pedals

Schutzabdeckung & universelle Montageplatte für FRIEDMAN Overdrive Deluxe & WALRUS Descent Pedale

Protective Cover & Universal Mounting Plate For FRIEDMAN Overdrive Deluxe & WALRUS Descent pedals

Pitchblack XS Bass by KORG