Daniel Burbach

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 1 V2 ist eine Pass-Through-Box, die speziell für Gitarristen und Bassisten entwickelt wurde. Du kannst das MOD 1 V2 nutzen um mehrere Pedale deines Setups im Front End und im Effekt-Loop des Verstärkers zu postieren (4-Kabel Methode) oder die vier TRS-Anschlüsse als zentralen Zugang und Ausgang des Boards nutzen. Die XLR-Through-Verbindung kann als Signalausgang vom Pedalboard zum Mischpult oder zur PA verwendet werden.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 5 x 6,3 mm TRS thru
- 1 x XLR thru (männlich vorne / weiblich hinten)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 5 x 6,3 mm / ¼" TRS thru
- 1 x XLR thru (male front / female back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR, IEC & Barrel Patchbay

Multi-Musical Style Tres 3.1 Board

Hinter der Pedal-Schmiede Amptweaker steckt James Brown. Nein, natürlich nicht der legendäre Soulsänger, sondern ein sehr erfahrener Amp-Entwickler, zu dessen Arbeitgeber auch schon Firmen wie Peavey und Kustom zählten. Die Hauptaufgabe von James Brown bei diesen Firmen war überwiegend die Feinabstimmung von Amps, die er mit eigens dafür entwickelten Pedalen vornahm. Damit war der Grundstein für seine eigene Company Amptweaker bereits früh gelegt.

The Bass TightFuzz is a flexible fuzz, from great germanium clean tones to heavy silicon fuzz, and has a Dry Low blend.

Amptweaker

Official Product Page

Manual

Demo by MrExcane 

Demo by Amptweaker 

Review by bonedo 

Bass Tight Fuzz

New for Winter 2019 (and beyond!!!)  The MBD-2 is the long awaited follow up to our successful MBD-1 MOSFET Bass Distortion.  The heart of the MBD-2 is the same bass loving distortion as the original but with a few enhancements customers have begged for (and up until recently we’ve looked down from our high horse and said, “No”).

Those enhancements include: a smaller enclosure (with top-jacks of course!!!), an external boost switch capable of adding 20dB of gain to transport the internal MOSFETs into valhala, silent bypass switching for quiet stages (what are those???), and of course a sexy new look.  This compact evolution of the MBD-1 can fit on smaller boards so you no longer have to decide between crushing bass distortion and your Altoids tin.

And as always you’ll…

Never Worry About Your Bass Tone Again!

Damnation Audio

Official Website

Review by reddit /basspedals

Review by Talk Bass.com

Review by Guitar Girl Magazine

Demo by The Vessel

Demo by MrExcane

Demo by Hondo Felder Music

Demo by Chicago Music Exchange

MBD V2

Antony Douch

Fusing classic BOSS octave tones with the latest tracking technologies, the BOSS OC-5 sets a new standard in octave pedal performance. Vintage mode provides a spot-on recreation of the legendary mono OC-2 from 1982, while Poly mode offers numerous enhancements for extended-range playing. And with the addition of an octave-up feature, a span of three octaves is now available for creative exploration. From fat, low mono sounds to octave-shifted chords and more, the OC-5 delivers the widest range, finest sound quality, and best playability in any octave stomp to date.

BOSS

Review by reddit /guitarpedals

Review by Six String Sensei

Review by Guitar World

Review by bonedo

Demo by  Pepe Music

Official Product Video

Product Page

OC-5

PedalSafe Type E1

QuickMount Type E

Pedal-Montageplatte für Standard-Boss-Pedale

Pedal Mounting Plate For Standard Boss Pedals

Schutzabdeckung & RockBoard-Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & RockBoard Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Schutzabdeckung & universelle Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & Universal Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Kevin Bendixen

Wir stellen den Jive - Reel Saturator vor, das Pedal, das deinen Sound auf die nächste Stufe heben wird. Inspiriert von der kultigen Akai GX 210D Reel-to-Reel-Bandmaschine aus den 1970er Jahren, liefert der Jive die charakteristische warme und klebrige Sättigung, die entsteht, wenn man die Vorverstärker auf die Spitze treibt.
Aber das Jive ist nicht nur etwas für Vintage-Puristen - es ist frech, düster und vollgepackt mit schreiendem Old-School-Mojo, das Ihre Musik aus der Masse herausstechen lässt. Egal, ob du deinen Lo-Fi-Garage-Sounds den letzten Schliff verpassen oder deinem modernen Synthesizer einen Retro-Look verpassen willst, der Jive - Reel Saturator ist die Antwort auf deine Gebete.
Und mit seinen täuschend einfachen, aber unglaublich vielseitigen Reglern ist der Jive das perfekte Werkzeug, um den perfekten Verzerrungsgrad einzustellen. Zusätzlich zu den Volume- und Gain-Reglern verfügt der Jive über drei Clipping-Dioden-Schalter, mit denen du mit verschiedenen Stufen der Asymmetrie und Symmetrie experimentieren kannst, um deinen ganz eigenen, einzigartigen Sound zu kreieren.
Darüber hinaus ist der Jive - Reel Saturator für einen Spannungsbereich von 9 bis 18 Volt ausgelegt, so dass du noch mehr Spielraum hast, um die knisternden und düsteren Texturen zu erkunden. Egal, ob du nach einem subtilen Hauch von Vintage-Wärme suchst oder die Verzerrung aufdrehen willst, um ein paar Wände einzureißen, der Jive - Reel Saturator ist der Schlüssel zur Entfaltung deines klanglichen Potenzials.

Introducing the Jive - Reel Saturator, the pedal that will take your sound to the next level. Inspired by the iconic Akai GX 210D reel-to-reel tape machine from the 1970s, the Jive is all about delivering that signature warm and gooey saturation that comes from pushing the pre-amps to the max.

But the Jive is not just for the vintage purists - it's bold, gritty, and loaded with screaming old-school mojo that'll make your music stand out from the crowd. Whether you're looking to bring some serious edge to your lo-fi garage tones or give your modern-day synth a throwback feel, the Jive - Reel Saturator is the answer to your prayers.

And with its deceptively simple yet insanely versatile control set, the Jive is the perfect tool to help you dial in that perfect level of distortion. In addition to the Volume and Gain controls, the Jive features three clipping diode toggles that allow you to experiment with different levels of asymmetry and symmetry, so you can create your own unique sound that's all your own.

What's more, the Jive - Reel Saturator is designed to handle everything from 9v to 18v, giving you even more headroom to explore the crackling and gritty textures within. Whether you're after a subtle touch of vintage warmth or want to crank up the distortion to tear down some walls, the Jive - Reel Saturator is the key to unlocking your sonic potential.

JPTR FX

Review by Reddit /guitarpedals

Review by Loopy Demos

Demo by Living Room GD

Jive

ch ray

Line 6 HX Stomp ist ein professioneller Gitarrenprozessor, der den Klang von Helix-Verstärkern, -Boxen und -Effekten in einem ultrakompakten Pedal liefert. Egal, ob Sie lieber ein traditionelles Amp-and-Pedal-Setup spielen oder direkt auf die Bühne oder ins Studio gehen, HX Stomp lässt sich nahtlos in eine Vielzahl von Umgebungen und Anwendungen integrieren. Das HX Stomp-Gitarrenpedal verwendet dieselbe DSP- und HX-Modellierungstechnologie wie seine größeren Helix-Brüder und passt dennoch problemlos auf Ihr Pedalboard oder sogar in die Tasche Ihres Gigbags. Es gibt über 300 Ampere, Kabinen und Effekte – einschließlich eines Loopers. HX Stomp enthält dieselben HX-Modelle wie die Produkte der Helix-Familie sowie die Legacy-Effektbibliothek der Line 6 M-Series-Pedale und Stompbox-Modellierer wie den DL4. Verwenden Sie es als "Super-Stompbox", als Backup- oder Travel-Rig, als zusätzlichen Tonexpander in Kombination mit anderen Modellierern, als Audio-Interface - oder sogar als komplettes Gitarren- oder Bass-Rig.

Line 6 have been at the forefront of the digital modelling world for over 20 years now, pushing the boundaries of guitar technology is nothing new for them and their flagship product, the Helix, has taken the guitar world by storm. With the scaled down Helix, the HX, becoming a go to for players, its latest version, the HX Stomp is sure to generate loads of interest!

The HX Stomp is the ultimate streamlined version of this superstar pedal. Constructed as a 3 pedal unit, the HX Stomp features the same processor as the Helix, meaning you get over 300 effects including legacy lines from the M Series, 8 simultaneous amp, cab and effects blocks, TRS dual expression pedal inputs and a stereo effects loop, it's a serious pedal!

It's super comprehensive but really user intuitive. Built with the working player in mind, it has a solid aluminium construction that can take the rigours of the road, perfect on stage or in the studio, the Helix is the future of multi effects.

LINE 6

Review by musicradar

Review by Gitarre & Bass

Demo by Guitar Bonedo

Demo by Bernd Kiltz - Gitarrenvideos

HX Stomp Black

PedalSafe Type L6

QuickMount Type L6

Pedal-Montageplatte für LINE6 HX Stomp Pedale

Pedal Mounting Plate for LINE6 HX Stomp pedals

Schutzabdeckung & RockBoard-Montageplatte für LINE6 HX Stomp Pedale

Protective Cover & RockBoard Mounting Plate For LINE6 HX Stomp pedals

Schutzabdeckung & universelle Montageplatte für LINE6 HX Stomp Pedale

Protective Cover & Universal Mounting Plate For LINE6 HX Stomp pedals

Adzim Ezani

HX® One is a powerful stereo effect pedal in an ultra-compact enclose that easily fits onto any pedalboard. It features intuitive controls, 250+ effects taken from HX family processors, a unique Flux Controller, a jack for connecting an optional expression pedal or two footswitches, adjustable input impedance, MIDI capabilities, and a choice of true or buffered DSP bypass.

Demo by Line 6

HX One

QuickMount Type C

Pedalmontageplatte für große vertikale Pedale

Pedal Mounting Plate For Large Vertical Pedals

Tavish Stone

The NEW Micro-Tron IV is the newest reincarnation of the classic Mu-Tron III™ envelope filter. The Micro-Tron IV provides all the classic Jerry tone and Bootsy funk, in a pedalboard-friendly size and powered by industry-standard 9V DC. We’ve also added an OUTPUT level control and the ability to footswitch select between UP and DOWN drives. It’s never been easier to cruise down “Shakedown Street” or get to “Higher Ground” – the Micro-Tron IV sounds amazing on guitar, bass, keys, horns, harmonica… you name it!
The new Micro-Tron IV is based upon the award winning Micro-Tron III and improves it with our very own MU Opto-Mod technology. We have also added standard CV input to accept an expression pedal such as the Dunlop DVP4 without modification! Furthermore, you can send envelope Control Voltage to other units such as the Phasor III and Bi-Phase pedals.

Mu-Tron

Demo by Von Scheffler

Demo by The Record Company

Review by Horn FX

Review by The Gear Page

Quick Start Guide

Micro-Tron IV

Der MINI-CHORUS ist derselbe wie unser normaler Chorus, jedoch in einer kleineren, handgestempelten Box. Er hat die gleiche Größe wie unsere kleinen Kompressoren/Entsafter:

Zum gleichen Preis wie der normale Chorus, standardmäßig mit Batterie- und Gleichstromadapteranschluss und der gleichen Platine im Inneren für die gleichen Sounds wie der normale Chorus. Es ist ein tolles, einfaches, kleines Chorus-Pedal mit tollem Klang! Es ist mit einem externen MIX (BLEND)-Regler oder Tiefenschalter für jeweils 25 US-Dollar mehr erhältlich. Die Boxen auf den Mini-Chorus-Pedalen sahen großartig aus, wirklich schöne blaue Strukturfarbe. Im Jahr 2019 jetzt mit Stereo-Option erhältlich (nur seitliche Buchsen, kein Batterieraum). LED am Mini Chorus ist Standard.

The MINI-CHORUS is the same as our normal chorus, but in a smaller, hand stamped box. It is the same size as our small compressors/juicers:

Same price as the normal Chorus, these have both battery and DC adapter jack standard, and the same board inside for the same sounds as the normal Chorus. It's a great, simple, small chorus pedal with awesome tone! It is available with an external MIX (BLEND) knob or depth toggle for $25 more each. The boxes on the mini chorus pedals came out looking great, really nice blue textured color. In 2019, now available with Stereo option (side jacks only, no battery room). LED on the Mini Chorus is standard.

Why does our chorus sound better than the others that are made today? Both the newer MN3207 and our MN3007 are rated for 2.5% maximum Total Harmonic Distortion (THD) at a certain input voltage level. For the MN3007, this level is 0.78V RMS. For the MN3207, it's 0.25V RMS!! This means that our MN3007 that we use can take a much higher input signal level, which means much more dynamic range, and less noise. Think of it as trying to play your stereo at the same clean loud volume through a 78 watt solid state amp or a 25 watt S.S. amp. The 78 watt amp will have less distortion and noise, and sound much better at higher levels.

Analogman

Demo by Hank Van Sickle

Demo by Hollywood Rare Guitars

Review by delicious audio

Review by Anatomy of Guitar Tone

Mini Chorus (Side Connections)

PedalSafe Type B1

QuickMount Type B1

Pedal-Montageplatte für FRIEDMAN, KEELEY Halo, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD, Jupiter V2 Pedale, Mooer GL 100

Pedal Mounting Plate for FRIEDMAN, KEELEY Halo, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD, Jupiter V2 pedals, Mooer GL 100

Schutzabdeckung & RockBoard-Montageplatte für FRIEDMAN, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD & Jupiter V2 Pedale

Protective Cover & RockBoard Mounting Plate For FRIEDMAN, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD & Jupiter V2 pedals

Schutzabdeckung & universelle Montageplatte für FRIEDMAN, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD & Jupiter V2 Pedale

Protective Cover & Universal Mounting Plate For FRIEDMAN, WAMPLER EQ, VelvetFuzz, WALRUS DeepSix, JULIA V2, 385 OD & Jupiter V2 pedals

Tester

Der SansAmp Bass Driver DI ist viel mehr als nur eine Direktbox. Er kann große Vintage-Röhrensounds, helle moderne Slap-Sounds, knorrige Verzerrungen und alles dazwischen erzeugen. Drei verschiedene Ausgänge zum Ansteuern von Endstufen, Aufnahmepulten, PA-Mischpulten oder einfach zum Verbessern Ihres aktuellen Rigs. Zu den Reglern gehören Presence für die Definition und den oberen Obertongehalt, Blend, um das Verhältnis von Direktsignal und SansAmp-Schaltung zu kombinieren, und ein aktiver EQ, der mit 12 dB Absenkung oder Anhebung speziell auf den Bass abgestimmt ist.

Da die Popularität von 5- und 6-saitigen Bässen den Status einer Modeerscheinung überschritten hat und zum Mainstream geworden ist, haben wir einen Schalter hinzugefügt, mit dem die Bassfrequenz so eingestellt werden kann, dass sie auch in die tieferen Lagen reicht. Außerdem haben wir einen Regler für die Mitten und einen Schalter zur Einstellung ihrer Frequenz hinzugefügt. Der Kern des SansAmp Bass Driver und alle seine Töne bleiben dem ursprünglichen Design treu.

Much more than just a direct box, the SansAmp Bass Driver DI is capable of dialing up big vintage tube tones, bright modern slap sounds, gnarly distortions, and all in between. Three different outputs to drive power amps, recording desks, PA mixers, or simply enhance your current rig. Controls include Presence for definition and upper harmonic content; Blend to combine the proportion of direct signal and SansAmp circuitry; and active EQ specifically tuned for bass with 12dB of cut or boost.

With the popularity of 5- and 6-string basses going beyond fad status and becoming mainstream, we added a switch to adjust the bass frequency to extend into those lower registers. We also added a mid-range control and a switch to adjust its frequency. The core of the SansAmp Bass Driver and all of its tones remain true to its original design.

Tech 21

Review by bondeo

Demo by Philip Brennan

SansAmp BDDI V2

PedalSafe Type D2

QuickMount Type D

Pedal-Montageplatte für große horizontale Pedale

Pedal Mounting Plate For Large Horizontal Pedals

Schutzabdeckung & RockBoard-Montageplatte für große horizontale Pedale

Protective Cover & RockBoard Mounting Plate for Large Horizontal Pedals

Schutzabdeckung & universelle Montageplatte für große horizontale Pedale

Protective Cover & Universal Mounting Plate For Large Horizontal Pedals

The Cali76 Compact Bass is an all-analogue recreation of the legendary Urei® 1176® studio compressor, specifically engineered for bass guitar and low frequency instruments. This studio-grade FET compressor uses Class-A, low-noise circuitry and dedicated controls for side-chain filtering and parallel compression, bringing your favourite recorded bass tones to your pedalboard.

With huge low-end clarity with a control set designed with bass guitarists in mind, the Cali76 Compact Bass gives you the transparency and feel of a world-class compressor, with enough precision and dynamic control to honour its studio heritage.

Origin Effects

Demo by BassTheWorld.com

Demo by IvanBassist

Demo by Andertons

Demo by Sweetwater

Cali76 Compact Bass

Featuring the largest tuning display Peterson Tuners has ever incorporated into one of their pedal tuners, the StroboStomp HD boasts a high-definition, LCD screen that incorporates a variable color LED backlight. The user-selectable colors can be used to personalize the tuner or to increase display viewing quality in different levels of ambient lighting depending on the usage environment. The vibrant screen colors can also be assigned to stock or user presets to significantly reduce menu navigation time and increase on-stage tuning confidence at the gig.

Peterson

Demo by The Time Preservation Society

Demo by EytschPi42

Demo by TalkingBass

Review by The Gear PAge

Review by TDPRI

StroboStomp HD

Für 5-10 FX-Pedale, 1 MOD-Slot - **522 x 236 mm / 20.55" x 9.29"** - erhältlich mit Gig Bag oder Flight Case

For 5 - 10 FX pedals, 1 MOD slot - **522 x 236 mm / 20.55" x 9.29"** - available with Gig Bag or Flight Case

Dave Rossel

Dave Rossel Tour Pedalboard

Jim Cartwright

This is an ABY switch which lets you send your input to either the A or B outputs, or to both simultaneously.

This ABY pedal comes with the added benefits of being active and having the B output going via an isolation transformer. With the pedal being active means that there will be no signal loss when the input signal is split to both outputs, and having output B going via an isolation transformer means there will be no ground hum issues.

Bright Onion Pedals

Active ABY

Für den Sub ‘N’ Up Octaver hat sich TC Electronic erneut mit dem legendären Effekt auseinandergesetzt und seinem neuen Schützling gleich drei zusätzliche Oktavlagen spendiert, die sich auch im polyphonen Spiel zum Signal hinzuaddieren lassen. Ursprünglich von Roger Mayer entwickelt und durch niemand geringeren als Jimi Hendrix berühmt gemacht, tauchte der Octaver als Effektgerät über die Jahrzehnte immer wieder im Sortiment verschiedener Hersteller auf.

SUB ‘N’ UP OCTAVER is the new leader of the pitch-pack. Featuring our superb next generation octave-engine and individual blend controls for dry, octave-up and two sub-octaves, SUB ‘N’ UP is set to deliver flawless octave tones whether you’re playing complex chords or groovy single-note lines

TC Electronic

Review by Bonedo 

Demo by Mike Hermans 

Demo by Pro Guitar Shop Demos 

Sub 'N' Up Octaver

The beauty of the RAT2 lies in its versatility.  Used as a primary distortion, it excels at arena rock rhythm tones and soaring leads.  Do you have a powerful amp with too much headroom for the gig?  Let the RAT2 be your dirty channel.  Maybe you already love your amp’s distortion.  Use the RAT2 as a boost for solos and get the extra kick you need.
The RAT2 features the legendary RAT filter control.  Turn it to the right to roll off brittle high-end frequencies.  Having trouble cutting through the mix?  Turn it to the left and allow the natural brightness of your instrument to shine through.

ProCo

Review by the JHS Show

Review by delamar

Review by Guitar Chalk

Demo by intheblues

Demo by PMTVUK

Rat 2

Zoom's MS-70CDR MultiStomp Chorus / Delay / Reverb pedal is the first of its kind. It provides the full power of a rack-mounted multi-effects device in a compact stompbox design. With its 86 custom guitar and bass effects, an easy-to-use interface, onboard chromatic tuner and versatile power options, you'll be astonished at how much this little box offers.

ZOOM

Effects List

MultiStomp MS-70CDR

EarthQuaker Devices

Dunes Mini Mega Ultimate Overdrive

QuickMount Type B

Pedal-Montageplatte für Standard-Einzelpedale

Pedal Mounting Plate For Standard Single Pedals

M288 Bass Octave Deluxe

G McClure

The PBC/6X allows you to connect 6 pedals and have complete flexibility in choosing which pedals are on at any time, as well as the order of those pedals in your signal chain. You can also control any MIDI compatible devices and switch channels on most amps that use 1/4-inch switching jacks.

RJM Music Technology

Demo by Pro Lessons

Mastermind PBC/6X

The EHX Grand Canyon is Electro-Harmonix’s most advanced multifunction delay and looper pedal. It’s equipped with 12 effect types plus a fully featured looper capable of recording and overdubbing the Grand Canyon’s effects.

The pedal provides superior sound quality, up to three seconds of delay time, tap tempo and nine tap divide settings, stereo output, 13 presets, programmable EXP pedal settings, high quality analog bypass with soft switching and more. The Grand Canyon’s 13 modes are:

1. ECHO – pristine 24-bit digital delay with available bit crush/sample rate reduction and low/high pass filtering
2. MOD – Modulated delay, yields rich flanger, chorus, vibrato, warble and more
3. MULTI – Multi-tap delay, set the exact number of echo repeats up to 31. Includes adjustable swell or decay volume envelopes on repeats.
4. REVERSE – Reverse delay, an easy-to-use reverse delay with an intelligent pick detection algorithm for great sounding reverse echoes
5. DMM – Deluxe Memory Man, re-creates the luscious tone of EHX ‘s legendary bucket-brigade delay pedal
6. TAPE – Tape Delay, simulates the organic sound of an analog tape, echo machine including tape distortion, wow and flutter
7. REVERB – Plate reverb plus echo. A reverberant echo where each repeat is followed by a wash of gorgeous plate reverb. Can also be used as a pure reverb without the delay
8. PITCH – EHX’s critically acclaimed polyphonic pitch shifting plus digital delay provides pitch-shifted echoes and cascading echo repeats
9.SHIM – Shimmer generates a rich octave-shifted wash of shimmering soundscapes
10. SAMPLE/HOLD – Sample and hold, senses a note being played and produces echoes indefinitely until another note is detected
11. DRUM – Magnetic drum echo that faithfully emulates a classic Binson Echorec® style delay. Features an assortment of playback head configurations that let you create musical, rhythmic, echo patterns
12. DOUBLE – Thickens up a mono signal or creates a stereo spread. Includes detune and delay time offset of the left and right outputs
13. LOOPER – Looper with up to 16 minutes of recording time. Includes unlimited overdubs, undo/redo, dedicated stop button, loop fade-out, reverse and speed adjust.

Electro-Harmonix

Grand Canyon

Das H9 Max Harmonizer®-Effektpedal ist vollgepackt mit Eventides kultigen Reverb-, Chorus-, Delay-, Modulations-, Pitch-Shifting- und Distortion-Effekten. Mit dem H9 Max können Sie die Klanglandschaft legendärer Alben nachempfinden und neue, noch nie gehörte Sounds kreieren. Sie können die legendären Sounds von Künstlern, Tontechnikern und Produzenten wie Steve Vai, Jimmy Page, Frank Zappa, Eddie Van Halen, Richard Devine, Suzanne Ciani und vielen anderen originalgetreu nachbilden.

Das preisgekrönte Design des H9 zeichnet sich durch eine einfache Benutzeroberfläche mit nur einem Knopf aus, die eine einfache Effektbearbeitung und Preset-Auswahl ermöglicht. Zwei integrierte Fußschalter ermöglichen das Ändern von Presets, Tap-Tempo und Bypass mit den Füßen während einer Live-Performance. Der H9 bietet Sound in Studioqualität, Stereo I/O und volle MIDI-Kompatibilität. Mit der kostenlosen H9 Control App können Sie Setlisten erstellen, Presets bearbeiten und verwalten - kabellos über Bluetooth oder USB. Die App ist für iOS, Android, Mac und PC verfügbar.

The H9 Max Harmonizer® effects pedal is full of Eventide’s iconic reverb, chorus, delay, modulation, pitch-shifting, and distortion effects. With the H9 Max, you can evoke the sonic landscape of legendary albums and open the doors to the creation of new sounds never heard before. Faithfully recreate the iconic sounds used by top artists, engineers, and producers such as Steve Vai, Jimmy Page, Frank Zappa, Eddie Van Halen, Richard Devine, Suzanne Ciani, and many more.

The award-winning design of the H9 features a simple, one-knob user interface that allows easy effect editing and preset selection. Two onboard footswitches let you change presets, tap tempo, and bypass with your feet during live performance. The H9 offers studio-quality sound, stereo I/O, and full MIDI compatibility. With the free H9 Control app, you can create setlists, edit and manage presets wirelessly via Bluetooth or USB. The app is available for iOS, Android, Mac, and PC.

Eventide

Review by Recording

Product Page 

Manual 

Demo by DJcityTV

Demo by Guitar World

Review by Equipboard

H9 Max

Featuring seven inspirational Lexicon® reverbs, the DigiTech® Polara will be the new architect of your soundscape, defining space and adding dimension to your playing. The Polara’s flexible reverbs cover a full spectrum, from the intimate warmth of “Room”, to the vast expansiveness of “Hall”, through time with the cosmic power of “Reverse”, and anchored by Lexicon’s revered “Modulated”, “Plate” and “Spring” reverbs. In addition to those classics, the Polara introduces the new “Halo” reverb. The “Halo” reverb with cascading octaves interspersed in the reverb decays will cast a heavenly glow over your tone. With its new, compact size and soft-touch vacuum-style footswitch, the Polara truly represents the latest evolution in DigiTech pedal design. We’ve put years of experience into every detail of its mechanical and sonic blueprint. The Polara offers independent Level, Liveliness, Decay and Type controls; Stereo Inputs and Outputs; a Soft Click Footswitch; and a Reverb Tails On/Off Toggle Switch. It is true bypass, and uses a 9V DC power supply to easily integrate into your existing pedalboard.

DigiTech

POLARA

QuickMount Type A

David Litaba

Designed in collaboration with Black Arts Toneworks, the Boneshaker is a dirty boost coupled with a powerful 3-band semi-parametric EQ. The Boneshaker can smack the front-end your amp into overdrive, or sculpt the tone of your fuzz to stand out in a mix. If your already dirty amp channel needs a little bit of a goose and you want full control over every frequency, the Boneshaker is just the ticket.

Review by Bonedo

Users Manual 

Demo by Guitar Interactive Magazine

DOD Boneshaker Reissue with Charlie O’Neal

Boneshaker Distortion

The Count to 5 is a unique take on a compact delay/sampler pedal. It has 3 main modes which allow pitch delays, random sampling and layered looping.

Montreal Assembly

Review by DelayDude, amazona.de

Demo by Aaron Rusch

Demo by Scott Monk

Demo by Knobs

Count to 5

Juan Fernandez

The brains and brawn* of the award-winning Helix family comes to a board-friendly 3-switch stomp in the Line 6 HX Stomp. The HX Stomp makes the ultimate standalone travel rig, a fully loaded modeling and effects engine to front-load an amp, and a capable audio interface with re-amping capabilities. Choose up to eight blocks — amps, cabs, and stomps — per preset, and assign switches to suit your particular needs. The HX Stomp is equipped for real-world gigging applications with 126 user presets for guitars, bass, and keys and tons of I/O, which include TRS balanced outs, traditional MIDI switching, an effects return for 4-cable amp integration, and a 2-channel expansion jack for expression pedals or additional external switches. Additionally, this special-edition HX Stomp comes in a galaxy-conquering Stomptrooper White finish.

HX Stomp Stormtrooper White

Jive by JPTR FX