Modeled directly after its predecessor’s circuit board, the Klon Centaur, Harby Centauri is built using the highest-quality components to give you that rich, clear Centaur sound without the Centaur price tag.

*Clean knob: achieve the perfect balance between the cleaner signal of the gain stage and the harmonically rich overdrive signal of the gain stage. The clean knob provides you with unparalleled tonal control, allowing you to dial in just the right amount of grit while retaining the clarity of your core sound.

*Original/JB(Phat) switch: Jeff modded his original Klon Centaur to allow more guitar low-frequencies into the circuit. Whether you’re laying down a solid rhythm or letting your leads soar, this switch ensures your sound remains punchy and full-bodied. This mod is subtle, but allows more bass to travel through the circuit and makes the circuit a little less thin sounding.

*Germanium/LED switch: tailor your overdrive texture to match your playing style using the Germanium/LED clipping diode switch. Toggle between the germanium diodes to keep it authentic to the original Klon Centaur/KTR or the added LED diodes for a more gritty, harmonically rich overdriven tone. From smooth and creamy to edgy and aggressive, this switch lets you sculpt your sound with precision.

Harby Pedals

Product Page

Review by The Gear Page

Centauri modified

Introducing a fresh take on a classic pedal that defined an era of music: the unforgettable roar of the Russian made Sovtek Big Muff Pi, now reimagined with modern sensibility. Our new pedal captures the iconic fuzz and distortion that inspired generations of musicians, with an innovative twist that sets it apart.

Review by Pedal of the Day

Demo by calilil

Demo by Pedal of the Day

Pi 7c modified

Das Boss CE-2 Chorus-Pedal von 1979 war für seine satten, warmen analogen Chorus-Töne bekannt und wurde ursprünglich mit dem legendären Panasonic MN3007 Bucket Brigade Device (BBD)-Chip und dem MN3101-Takttreiber gebaut. Das ursprüngliche CE-2 hatte einen deutlichen Lautstärkeabfall beim Einschalten, eine Eigenschaft, die einige Spieler als einschränkend empfanden. Moderne Reproduktionen wie das Boss CE-2W Waza Craft-Pedal haben das Problem des Lautstärkeabfalls behoben und hochwertige Reproduktionen von BBD- und Taktchips verwendet. Bei ihrer Neuauflage kam jedoch eine neue Herausforderung hinzu: eine leichte Erhöhung der Ausgangslautstärke, die zu einer spürbaren Lautstärkesteigerung beim Einschalten des Pedals führte, ohne dass eine Anpassung möglich war.

The 1979 Boss CE-2 chorus pedal was renowned for its lush, warm analog chorus tones, originally built using the legendary Panasonic MN3007 Bucket Brigade Device (BBD) chip and the MN3101 clock driver. The original CE-2 had a notable volume drop when engaged, a characteristic that some players found limiting. Modern reproductions, like the Boss CE-2W Waza Craft pedal, fixed the volume drop issue and used high-quality reproduction BBD and clock chips. However, in their remake a new challenge was introduced: a slight increase in output volume, causing a noticeable volume boost when the pedal is engaged with no way to adjust.

Mizu

A modern recreation of the green Sovtek Big Muff (7B/7C models) distortion, sustainer, fuzz pedal. Harby BMF is built using the highest quality components, including; solid anodized aluminum knobs, Neutrik input/output jacks, Japanese capacitors and resistors.

The pedal features volume, distortion, and tone controls. True bypass foot switch. The pedal operates at 9 volts DC using a standard negative center power supply.

Demo by Sascha Rebbe

Manual

Taking inspiration from Analog Man’s Prince of Tone overdrive, the Harby Noble Tone is based on the same schematic to give you the same organic-sounding tube distortion. Built in the USA with high-quality components. And the best part? No waiting list.