andronik supersonik

Guitar ulala

Tester

The original DiscumBOBulator was often heralded as being the world’s best autowah/envelope filter pedal. So how do you improve a pedal that’s already flawlessly funky? Well, start out by making the filter-triggering even better and extend the dynamic range and feel. Now triple the headroom signal, so the pedal handles the red hot signals of active bass pickups and line level inputs like a piece of cake. Finally you add an independent 10dB boost that’ll make funky solos take flight instantly, and you have the new improved DiscumBOBulator V2.

Emma Electronic

Demo by Godlyke Inc.

Demo by  Maksim Sorokin

Product Page

Review by Pedal of the Day

Review by Talk Bass.com

Review by musicradar

Manual

DiscumBOBulator v2

Nicolas Wilfer

Die JHS Colour Box V2 ist ein Preamp / DI-Box nach dem Vorbild legendärer Neve Studio-Konsolen. Das Pedal wurde entwickelt um den authentischen Sound eines Instruments (oder Mikrofons) am Direct-In der Mischpulte zu reproduzieren, dabei bietet die Colour Box V2 alle Features der beliebten V1-Version und kommt zusätzlich mit einer Vielzahl an Verbesserungen und neuen Features, die das Pedal zu einem perfekten Allrounder und Always-On Pedal für alle denkbaren Instrumente und sogar für Sänger machen. Zu den neuen Features zählen eine erweiterte EQ-Sektion, ein Hi/Lo Schalter für massiven, cleanen Headroom und die Möglichkeit 48V Phantom-Power an Kondensator-Mikrofone weiterzugeben. Die Gain-Sektion (Rot) bietet Regelmöglichkeiten Master, Pre-Vol und Step. Master kontrolliert das Gesamt-Volume des Pedals, Pre-Vol arbeitet als Gain-Regler zwischen den beiden internen Gain Stages und bietet bei Bedarf eine Verzerrung, die von leichten Break-Up-Sounds bis zu Fuzz reicht. Der Step-Regler verändert das Gain der Preamp Stages in fünf Schritten. Der Hi/Lo Schalter verändert den cleanen Headroom des Pedals, der -20 dB Pad Schalter passt den Input bei Bedarf an Mikrofone mit einem hohen Ausgangspegel an. Die EQ-Sektion (Blau) wurden neben den bekannten Regler für Treble, Middle und Bass (+/- 17 dB Cut / Boost in jedem Band) um drei Shift-Regler erweitert, die den Frequenzbereich der einzelnen Regler anpassen. Die Hi-Pass-Sektion wird über den Kippschalter aktiviert. Um das Pedal so flexibel wie möglich zu halten steht ein kombinierter XLR/TRS Input zur Verfügung.

The JHS Colour Box V2 has all the same functionality of the popular V1 version with many new and improved additions like expanded EQ controls, a Hi/Lo switch for massive clean headroom, and the ability to pass phantom power to your condenser mics. The Gain section in red has three controls: Master, Pre-Vol, and Step. The Master volume controls the overall volume of the unit. The Pre-Vol controls the amount of gain between the two internal gain stages. This acts as a "drive" or "gain" control, adding more grit, distortion, and even fuzz as you increase the gain. The Step control increases the gain of each preamp stage in five stages. Rotating the Step knob from left-to-right will increase the gain by the following: 1st is +18 dB, 2nd is +23 dB, 3rd is +28 dB, 4th is +33 dB, 5th is +39 dB. The JHS Colour Box V2 has a new Hi/Lo switch to control the amount of clean headroom you have available. In the Lo mode, you will easily be able to get ultra clean sounds without breakup. Lo Mode is excellent for tone shaping when distortion is not needed. In the Hi mode, the Colour Box V2 will distort much more readily, giving you a broad spectrum of overdrive, distortion, and fuzz sounds. In addition to the Hi / Lo gain switch, there is a -20 dB pad switch on the right side of the Colour Box V2. This function only works when in XLR input mode and can help tame the volume for high output microphones. The EQ section in blue has three new Shift controls correlating to its standard Treble, Middle and Bass controls. The Shift knobs adjust the range of frequencies that the Treble, Middle, and Bass knobs control. The center frequencies for the Shift knobs are Treble 10kHz, Middle 1kHz, and Bass 120Hz, while the Treble, Middle, and Bass knobs boost or cut with +/- 17 dB of control. If you want to boost high-mid frequencies, turn the Mid Shift knob to 3 o'clock or above and increase the Middle knob above 12 o'clock. If you want to cut upper treble frequencies, turn the Treble Shift knob to 3 o'clock or above and set the Treble knob below 12 o'clock. The Shift knobs give you precision control over the EQ for anything you put through the Colour Box V2. The Hi-Pass section is enabled by the toggle switch below the Hi-Pass knob. Just flip it up to engage the Hi-Pass knob, which spans from 60Hz to 800Hz with a 6dB per octave slope. The Colour Box V2 has a combination XLR and 1/4" input jack to use either an instrument or microphone. Select your input with the input selector switch on the right side of the pedal labeled INST/XLR.

Official Product Page

JHS Colour Box: A 1073 You Can Take Anywhere - JHS Pedals

Colour Box V2 10 Year Anniversary

Effectrode

Demo by Joe Perkins

Demo by Mike Hermans

Review by Anatomy of Guitar Tone

Mercury Tube Fuzz

Ruben Shannon

The Effectrode® ‘LA-1A’ Leveling Amplifier is a high-end, studio-grade vacuum tube compressor in a pedal. Whisper-quiet operation and a wide, wide dynamic range make this tone-tool an unparalleled tone enhancer on stage and in the studio—its natural warmth and clarity are unmatched.

Review by CompressorPedalReviews

Demo by Electric Mojo Guitars

Review by loopersparadise

LA1A Levelling Amplifier

The Fire Bottle™ is an all-tube booster specially designed to enhance the tone of single coil pickups. With up to 30dB of gain on tap, this powerful boost pedal can push the input stage of a tube amp into beautiful breakup and rich overdrive, creating glassy, bolder, larger-than-life Stevie Ray Vaughan Strat® guitar sounds.

Review by Musiker-Board

Demo by gilmourish

Fire Bottle

The Delta-Trem™ authentically recreates the alluring, hypnotic tone and feel of vintage guitar amp tremolo in S-T-E-R-E-O! This is accomplished using vacuum tubes and an archaic, long forgotten electronic component known as a ‘Raysistor’, essentially a tiny filament lamp and photocell housed together in a small metal can. The combination of Raysistor and all-tube circuitry tube creates an exceptionally smooth, rich and musical tremolo effect that blends well with clean and overdriven guitar sounds. The true stereo signal path allows the Delta-Trem to operate as a mono tremolo with a single guitar amp or into two amps, where the sound ping-pongs between them creating a huge, 3-D, spacious tone.

Demo by DMTR Pedal Shop

Delta-Trem

The Blue Bottle™ Inductorized Booster pedal has been custom designed for blues/rock guitarist John Verity to enable him to achieve a fatter, more bluesy B.B. King ‘335’ tones from his Strat-type guitars. It’s the perfect vintage mid-boost—never too aggressive or over-the-top—for low output single coil pickups.

Review by Guitar World

Demo by John Verity

Official Product Video

Blue Bottle

The Replicator D’Luxe is a sum up from all the knowledge, we have built up over the years, making
Tape delays.
it is a 2 head machine. The drive mechanism has been updated with a noiseless belt drive. A tape lock/release mechanism is added, to make the pinch wheel and tape last longer and electronics has been tuned to perfection.

T-Rex

Demo by Martin Klaja's Guitarchannel

Demo by Duskmos

Demo by T-Rex Effects

Review by The Gear Page

Review by GEOFF KING, mixdownmag.com.au

Replicator D'LUXE

Der Heilige Gral unter den Gitarrenhall-Effekten, der Federhall im Fender®-Stil, wurde endlich mit modernen Funktionen neu aufgelegt!
Teste ihn und entdecke, warum die meisten Surf-Gitarristen und die wirklich Hallsüchtigen auf SurfyBear setzen.

The Holy Grail of guitar reverb effects, the Fender®-style spring reverb, has been finally revisited with modern features!
Try it and discover why most surf guitarists and the truly reverb addicted are turning to SurfyBear.

Surfy Industries

Demo by R.J. Ronquillo

Review by TapeOp

Review by bonedo

Surfybear Metal Reverb

With the TU-3W, BOSS brings Waza Craft mojo to the world’s leading stompbox tuner. At its core, the TU-3W provides rock-solid tuning equivalent to the industry-standard TU-3. In true Waza tradition, the pedal’s benchmark functionality is further enhanced with BOSS skill and craftsmanship. Pure, uncolored signal transfer is essential for a tuner, and the TU-3W features redesigned circuitry with selectable buffered or true-bypass operation and the most transparent audio pass-through possible. Packing high-end performance for discriminating players, the TU-3W delivers a premium pedal experience only available from BOSS.

BOSS

TU-3W Tuner

PedalSafe Type E1

QuickMount Type E

Pedal-Montageplatte für Standard-Boss-Pedale

Pedal Mounting Plate For Standard Boss Pedals

Schutzabdeckung & RockBoard-Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & RockBoard Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Schutzabdeckung & universelle Montageplatte für BOSS Compact Serie, RC3 LoopStation & RC5 LoopStation Pedale

Protective Cover & Universal Mounting Plate For BOSS Compact Series, RC3 LoopStation & RC5 LoopStation pedals

Für 10-20 FX-Pedale, 2 MOD-Slots - **828 x 330 mm / 32.60" x 12.99"** - erhältlich mit Gig Bag oder Flight Case

For 10 - 20 FX pedals, 2 MOD slots - **828 x 330 mm / 32.60" x 12.99"** - available with Gig Bag or Flight Case

analog-stereo rhodes

Miguel Angel Antonio Martínez Fuentes

Das DC7 ist ein professionelles Schaltnetzteil mit einem bemerkenswert flachen Profil von nur einem Zoll, das speziell für die Montage unter Pedalboards mit geringer Bodenfreiheit entwickelt wurde. Es bietet sieben isolierte DC-Ausgänge, von denen jeder bis zu 660 mA bei 9 V liefert, wobei pro Ausgang vier wählbare Spannungen zur Verfügung stehen. Das Gerät verfügt über einen 5V-USB-Ausgang für Mobilgeräte und einen 24V-Zusatzanschluss zur Systemerweiterung mit Einheiten wie dem CIOKS 4 oder 8. Eine fortschrittliche mehrstufige Filterung gewährleistet einen extrem rauscharmen Betrieb, ideal für stromhungrige digitale und empfindliche analoge Effekte. Das Netzteil nutzt einen universellen Netzeingang, was den weltweiten Einsatz ohne externe Transformatoren ermöglicht.

The DC7 is a professional-grade switch-mode power supply featuring a remarkably slim one-inch profile designed for low-clearance pedalboard mounting. It provides seven isolated DC outlets, each capable of delivering up to 660mA at 9V, with four selectable voltages available per outlet. The unit includes a 5V USB output for mobile devices and a 24V auxiliary port for expanding the system with additional units like the CIOKS 4 or 8. Advanced multi-stage filtering ensures ultra-low noise operation, making it suitable for high-current digital and sensitive analog effects. The power supply utilizes a universal mains input, allowing for worldwide use without the need for external transformers.

CIOKS

Review by Sound on Sound

Review by Guitar Chalk

DC 7

Jimmy  Cooper

CIOKS 4 Expander is the perfect companion to CIOKS DC7 in case you would like four additional outlets with four selectable voltages on each tap (9, 12, 15 and 18V DC) which can each deliver 660mA at 9V DC. Simply connect CIOKS 4 Expander to your CIOKS DC7 via the courtesy 24V outlet and you are good to go.

But that is definitely not all – what makes CIOKS 4 Expander truly unique is the fact that you can power it with anything from 9V to 24V DC or 9V to 12V AC via the non-polarized DC socket input. Furthermore CIOKS 4 can even be powered by connecting it to a USB powerbank via its 5V USB C input or by using a tablet or laptop power supply with a USB C plug. This flexibility means that you can use CIOKS 4 Expander as a stand-alone unit and power it with almost any adapter including the 1-SPOT or GigRig Generator. You can also use the 24V output on a Strymon Zuma unit to power the CIOKS 4 Expander. It can also convert an unused AC outlet on your existing power supply into 4 isolated DC outlets. 

Demo by EytschPi42

Review by KVR Audio

Horst Balle

Old Blood Noise Endeavors

Dual Moving Filter

David Litaba

Simpel, solide und nützlich. Der JHS Mute Switch ist genau der einfache Stummschalter den du schon immer gebraucht hast. Tritt drauf und alles, was du daran anschließt ist sofort 100 % still!

Simple, solid and very useful. Have you ever needed a simple mute switch with no frills? Just hit the footswitch and anything plugged into the input is made 100% silent.

Demo by Pedal Empire

Mute Switch

QuickMount Type L

Pedal-Montageplatte für Standard-Mini-Pedale

Pedal Mounting Plate For Standard Mini Pedals

Du willst dein Signal splitten und nicht auf passive Geräte, die deinen Tone killen und Signal verlieren zurückgreifen? Hier hast du was du brauchst! Diese kleine Zauberbox nimmt dein Inputsignal und splittet es permanent in zwei gebufferte Ausgangssignale, sodass dein Sound nicht an Klarheit verliert. Schließ deine Gitarre ans eine Ende und schicke es an einen Tuner, Mixer, separaten Amp etc. und den anderen Ausgang an dein Pedalboard, wie immer.

Need to split your signal? Don’t want to settle for a passive device that will kill your tone and cause signal loss? This is what you need! This little box of magic takes your input signal and splits it into two always-on outputs that are buffered so you don’t lose clarity or tone in any way. Plug your guitar in and use one output to send your clean signal somewhere like a tuner, mixer, separate amp, etc... and send the other output through your board like normal.

Buffered Splitter

Peter Hoffmann

Der Sfx Sound micro-Thumpinator v1 ist ein dediziertes Hochpassfilter-Pedal, das für E-Bass entwickelt wurde. Seine Hauptfunktion ist das Entfernen von unerwünschten, unhörbaren Unterschallfrequenzen, die bei Verstärkern zu Clipping führen und den Sound, besonders bei hohen Lautstärken, undifferenziert machen können. Durch das Herausfiltern von Frequenzen unter einer bestimmten Schwelle strafft es den Low-End-Bereich, verbessert die Klarheit und optimiert die vom Verstärker gelieferte Energie. Das Pedal funktioniert mit Instrumenten- und Line-Pegel-Signalen und kann an jeder Stelle in der Signalkette platziert werden.

Bandwidth OptimiThe Sfx Sound micro-Thumpinator v1 is a dedicated high-pass filter pedal designed for bass guitar. Its primary function is to remove unwanted, inaudible subsonic frequencies that can cause amplifiers to clip and sound muddy, particularly at high volumes. By filtering out frequencies below a certain threshold, it tightens the low-end, improves clarity, and optimizes the energy delivered by the amplifier. The pedal works with both instrument and line-level signals and can be placed anywhere in the signal chain.zer: Cutting off fundamental frequencies below 30 Hz

SFX Sound

Demo by  NoPlaceForTheDead

Product Page for Version 2

Talkbass Forum

micro-Thumpinator v1

QuickMount Type UV

Universal-Pedal-Montageplatte für vertikale Pedale

Universal Pedal Mounting Plate For Vertical Pedals

Das leistungsstarke Atomic™ Isolated Power Supply wurde entwickelt, um den hohen Stromanforderungen der Effectrode-Röhrenpedale gerecht zu werden. Es verfügt über eine einzigartige „Soft-Start“-Spannungsfunktion, die das Aufblitzen der Röhrenheizfäden verhindert und die Lebensdauer der Röhren maximiert.
Wird mit einem länderspezifischen IEC-Netzkabel und vier DC-Stromkabeln geliefert.

The mighty Atomic™ Isolated Power Supply is developed to meet the high power requirements of Effectrode tube effects pedals. Includes a unique "soft-start" voltage capability, which eliminates tube heater filament flash and maximise the life of the tubes.\r\nSupplied with country-appropriate IEC power cable and four DC power leads.

Demo by Everything Guitar

Atomic Power Supply

This little green wonder is the world’s smallest tube buffer pedal. Inside is a Sylvania pencil tube operating at 300V, which means the Glass-A™ can effortlessly handle massive signal levels and transients from piezo crystal and high-output active magnetic pickups without distortion for an incredibly open, natural and transparent sound.

Glass-A Triode Buffer

The Tube-Vibe™ is a no compromise, innovative and original re-design of the classic Uni-Vibe pedal. However, instead of transistors, the Tube-Vibe utilises vacuum tubes, photocells and a pulsating filament lamp to generate exceptionally rich, swirling chorus and vibrato effects.

Tube Vibe

DC-2W Dimension C (Waza Craft)

On more subtle settings the Phaseomatic tube phaser pedal creates a beautiful, natural sounding vibrato (frequency modulation) and shimmering phasing effects, utilising exactly the same one- and two-stage “Cathodyne” tube circuitry used to in those incredible vintage Magnatone® amps. However, the Phaseomatic’s all-tube circuitry has two additional Cathodyne phase inverters, which allow it to generate a much richer, deeper vibrato and even intense, deep “tunnel” phasing as well as a host of cosmic and spacious sound effects heard on many 1950′s “B” science fiction movie soundtracks.

Phaseomatic Vacuum Tube Phaser

The real McCoy! The SR-71 Blackbird™ ‘Tube Tone Engine’ is a genuine all-tube preamp in a compact pedal. Designed for great versatility, the  SR-71 adds additional clean/drive/distortion channels to vintage/boutique guitar amps or works as a professional stand-alone direct recording tube preamplifier. The clean channel possesses a beautifully pure, ‘glassy’ character and audio circuitry within the drive channel is tuned to generate a rich, full-bodied and devastatingly smooth overdrive.

Demo by Brett Kingman

Blackbird

The Element is a pedal that takes back the very essence of the analogue reverb,
which is obtained by physically stimulating springs thanks to the guitar signal.
Simply. No artificials. No calculations.
From beautiful mechanics coupled to analog signal processing.

Anasounds

Review by mixdownmag

Review by Premier Guitar

Element

Le Truand, is simply out of competition! This is the one that offers the richest sound!
With endless shpouingwingwigouing! A monstrous cavity and an unusual resonance.
You will have to find a place for him not far from the amp or near the pedalboard
because his size is really big! This is the team’s favorite.
That’s why we decided to propose it despite its size.

Demo by TonePedia

Demo by Peter Honoré

Le Truand Spring Tank

Sebastian Rosenfeldt

A mixer for today's gigging keyboard player

Designed for stage use, the Key-Largo allows you to connect up to three stereo keyboards, effects and volume pedals, and a laptop computer via USB, managing all these signals to send a balanced audio feed to a PA system for a seamless performance on stage. Three stereo analog inputs feature individual volume controls to balance levels, and each can be sent to a shared effects loop to add reverb or delay in an instant using a dedicated footswitch. A USB connection allows laptop computers to be integrated into the setup for control of soft-synths, and a built-in sustain footswitch and connections for a stereo volume pedal provide additional ways to control your performance.

Radial Engineering

Demo by Bonedo Synthesizers

Review by AMAZONA

Key-Largo

The PLASMA Pedal creates heavy distortion by amplifying an audio signal up to 3500 Volts and transforming it into electrical discharges. You are literally playing a bolt of electricity.

Gamechanger Audio

Website

Plasma Pedal

Für 15-25 FX-Pedale, 2 MOD-Slots - **820 x 424 mm / 32.28" x 16.69"** - erhältlich mit Gig Bag oder Flight Case

For 15 - 25 FX pedals, 2 MOD slots - **820 x 424 mm / 32.28" x 16.69"** - available with Gig Bag or Flight Case

Frank Gerards

2-channel signal flow:

1. highpass->preamp->discumbob->ultrawave->preamp-return->output

2.highpass->spectraComp->output

Die überarbeiteten RockBoard® MODs V2 sind einfache all-in-one Patchbays für die RockBoard Pedalboard Series mit einem neuen, überarbeiteten Design und einem kompakten Gehäuse. Passend für alle neuen RockBoards® (außer der DUO-Serie) mit einem MOD-Slot, bieten sie als komfortable Patchbay verschiedene Kabelverbindungen, um eine weite Reihe von Bedürfnissen abzudecken. Mit den RockBoard® MODs kannst du deine Pedale dauerhaft unter dem Board verkabeln und alle Verbindungen zu und von deinem Effektsetup in einem praktischen Modul organisieren. Die RockBoard® MODs bieten einen zentralen Zugangspunkt vom Instrument zum Verstärker sowie eine praktische und einfache Stromversorgung des Boards über einen IEC- und einen 2,1 x 5,5 Barrel-Through-Stromanschluss. Das RockBoard® MOD 1 V2 ist eine Pass-Through-Box, die speziell für Gitarristen und Bassisten entwickelt wurde. Du kannst das MOD 1 V2 nutzen um mehrere Pedale deines Setups im Front End und im Effekt-Loop des Verstärkers zu postieren (4-Kabel Methode) oder die vier TRS-Anschlüsse als zentralen Zugang und Ausgang des Boards nutzen. Die XLR-Through-Verbindung kann als Signalausgang vom Pedalboard zum Mischpult oder zur PA verwendet werden.
- All-in-One Patchbay für Pedalboards
- passend für MOD slots in RockBoard Pedalboards
- kompatibel mit einer weiten Reihe and anderen Pedalboards
- fungiert als zentraler Zugangspunkt zu deinem Effekt Setup
- etabliert klare Kabelwege zum und vom Pedalboard
- abnehmbare Frontplatte für Montage auf oder unter Pedalboards
- 5 x 6,3 mm TRS thru
- 1 x XLR thru (männlich vorne / weiblich hinten)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- alle Anschlüsse gespiegelt auf der Rückseite
- Abmessungen exkl. Frontplatte (B x T x H): 160 x 60 x 33 mm
- Abmessungen der Frontplatte (B x H): 175 x 48 mm
- Gewicht 450 g
- inkl. Montageschrauben, Kontermuttern und TX Schlüssel

The improved RockBoard® MODs V2 are simple all-in-one patchbays for RockBoard pedalboards with a new, refreshed design, and compact housing. Utilizing the MOD slot on all new RockBoards® (except the DUO series), they provide various cable connections to fit a wide variety of needs as a convenient patchbay. With the RockBoard® MODs, you can permanently connect your pedals underneath your board and organize all connections to and from your effects setup in one convenient module. The RockBoard® MODs provide a central access point from your instrument to your amp, as well as your power supply via IEC, and a 2.1 x 5.5 barrel thru power connector. The RockBoard® MOD 1 V2 is a pass-thru box especially designed for guitar and bass players. It can also be used to run several pedals from your board through the effects loop of your amp, or as a central access point to your pedalboard via its 4x TRS thru connections. The XLR thru connection can be used as signal output from your pedalboard to the console or PA.
- all-in-one patchbay for pedalboards 
- fits MOD slots in RockBoard pedalboards
- compatible with a wide variety of other pedalboards
- acts as the central access point to your effects setup
- establishes clean cable paths to and from the pedal board
- detachable front plate for mounting on top or underneath pedalboards
- 5 x 6,3 mm / ¼" TRS thru
- 1 x XLR thru (male front / female back)
- 1 x DC 2,1 x 5,5 mm barrel thru
- 1 x AC IEC thru (male front / female back)
- all connections mirrored on the backside
- dimensions excl. front plate (W x D x H): 160 x 60 x 33 mm / 6 19/64" x 2 23/64" x 1 19/64"
- dimensions of the front plate (W x H): 175 x 48 mm / 6 57/64" x 1 57/64"
- weight 450 g / 0.99 lbs
- incl. mounting screws, counter nuts, and TX wrench

All-in-One TRS & XLR, IEC & Barrel Patchbay

Pedalboard mit Rockboard Dock

Roger Thompson

Portable MIDI foot controller pedal is small and exquisite, with easy-to-use 4 foot switches.
Wireless MIDI pedal with intelligent APP(CubeSuite) control, easy to operate, convenient to use.
Bulit in 300mAh rechargeable lithium battery, charging for 2.5 hours, can be used for 12 hours.
The display screen can directly feedback the commands you issued, intuitive and clear.
Compatible with Wins, iOS, Android and other platforms.

M-VAVE

Demo by The Pedal Picassos

Demo by Ehrosmith TV

Chocolate

Giorgio Garavaglia

Der High Pass Filter ist das perfekte Utility-Pedal zum Aufräumen der tiefen Frequenzen.
Der Hochpassfilter ist ein 12 dB pro Oktave tiefes Frequenzfilter. Der Drehregler steuert die Cutoff-Frequenz und reicht stufenlos von 25 Hz bis 190 Hz.
Die serienmäßige Eingangsimpedanz beträgt 1 MΩ. Wenn du einen akustischen Tonabnehmer hast, der eine spezielle Eingangsimpedanz erfordert, schreibe es in die Anmerkungen während des Check-Out, und wir werden die Anfrage ohne zusätzliche Kosten berücksichtigen. Die Ausgangsimpedanz beträgt 100Ω. Dieses Gerät funktioniert mit aktiven oder passiven Instrumenten, sowie mit anderen Geräten wie Pedalen, Vorverstärkern oder Effektschleifen.

The High Pass Filter is the perfect utility pedal for cleaning up the low end.
The high pass filter is a 12 dB per octave low frequency filter. The knob controls the cutoff frequency and ranges continuously from 25 Hz to 190 Hz.
The stock input impedance is 1MΩ. If you have an acoustic pickup that requires a specialized input impedance, write it in the notes during check-out, and we will accomodate the request at no extra cost. The output impedance is 100Ω. This device will work with active or passive instruments, as well as with other devices such as pedals, preamps, or effects loops.

Broughton Audio

Review by Reddit /guitarpedals

High Pass Filter

What exactly does the Ultrawave Multiband Bass Processor do? Initially, the incoming bass signal is divided into different frequency bands. You can choose between 1, 2, 3, 4, 8 or 10 bands specially chosen for the bass. There are a total of 37 different options for combining different frequencies. In the next step, the different frequencies can be assigned different effects. On board are 44 different distortion/overdrive/fuzz effects, a dual-channel compressor, a multi-band tremolo and a graphic 8-band EQ. Everything is controlled via a Neuro Desktop Editor (Mac and Windows) or the mobile app (iOS and Android). The sounds are loaded onto the pedal via USB and can be called up there as presets and further processed with the controls.

To develop such a complex pedal requires a lot of know-how. The American company Source Audio, founded in 2005, has more than enough of them. Their innovative products have been setting the standards in the field of digital effects for years! It is not without reason that greats like David Gilmour, U2, David Bowie, John Mayer, Aerosmith, Phish, King Crimson, My Morning Jacket, The Cure and Victor Wooten trust the pedals of the Californians.

One reason for the company's success is definitely the willingness to work directly with the musicians. The Ultrawave Multiband Bass Processor was developed together with bassist Nathan Navarro , who is one of the most sought-after musicians in the prog rock scene and is also a big star on YouTube. The world of effects has long been his passion and his distinctive sounds are in demand around the world in the studio and on stage.

Source Audio

Endless possibilities - the new benchmark in the digital sector!

SOURCE AUDIO ULTRA WAVE BASS

How To Use Audio Compression For Bass

Ultrawave Bass

Derrick Robinson

Der On-Stage GSP1000 ist ein vielseitiger, kompakter ABY-Umschalter, der für verschiedene Signalrouting-Anwendungen entwickelt wurde. Er verfügt über eine bidirektionale Schaltung, die Konfigurationen mit zwei Eingängen/einem Ausgang oder einem Eingang/zwei Ausgängen ermöglicht, was ihn ideal für das Wechseln zwischen zwei Instrumenten oder das Umschalten zwischen zwei Verstärkern macht. Das Pedal nutzt eine True-Bypass-Schaltung, um die Signalintegrität im ausgeschalteten Zustand zu gewährleisten, und enthält eine dreifarbige LED-Anzeige zur visuellen Darstellung der Auswahlmöglichkeiten A, B oder A+B (beide). Das in einem robusten Aluminiumgehäuse mit rutschfester Gummibasis untergebrachte Gerät ist auf Langlebigkeit und Platzersparnis auf dem Pedalboard ausgelegt. Da die Umschaltung passiv erfolgt, funktioniert das Pedal auch ohne Stromversorgung, wobei Strom lediglich für die LED-Statusanzeigen benötigt wird.

The On-Stage GSP1000 is a versatile, compact ABY switcher designed for various signal routing applications. It features a bi-directional circuit that allows for two-input/one-output or one-input/two-output configurations, making it ideal for switching between two instruments or toggling between two amplifiers. The pedal utilizes a true-bypass circuit to ensure signal integrity when the effect is disengaged, and it includes a three-color LED indicator to visually represent A, B, or A+B (both) selections. Housed in a heavy-duty aluminum chassis with a non-slip rubber base, it is built for durability on pedalboards where space is at a premium. The passive nature of the switching means it can function without power, though power is required for the LED status indicators.

On-Stage

GSP1000 ABY Switcher

Two Notes Audio Engineering

Le Bass Dual Channel Preamp

Einfacher als mit der One-Knob-Lösung des SpectraComp kann man einen Kompressor wohl kaum bedienen. Insofern erreicht der jüngste Spross aus der TC-Familie schon mal im Handumdrehen die höchste Punktzahl im Bereich der Userfreundlichkeit.

Ultra-Compact Multiband Compression Pedal for Bass with Built-In TonePrint Technology

TC Electronic

Review by Bonedo 

Demo by SweetWater

Demo by Bass The World 

Spectracomp Bass Compressor

Harley Benton

PowerPlant ISO-5 Pro

Für 5-10 FX-Pedale, 1 MOD-Slot - **442 x 236 mm / 17.40" x 9.29"** - erhältlich mit Gig Bag oder Flight Case

For 5 - 10 FX pedals, 1 MOD slot - **442 x 236 mm / 17.40" x 9.29"** - available with Gig Bag or Flight Case

You may have guessed it already, solely based on the looks of the PisdiYAUwot, this beast was made for METAL! The gain stage is raw and brutal yet extremely clear and defined. The EQ options are staggeringly versatile to say the least. The sound? Earthshakingly awesome! Chords, fast runs and triplets stand out with a clear and potent punch. No more mushy wobble, just power!

Review by audiofanzine

Demo by Living Room GD

Demo by MetalRecordingServices.com

PisdiYAUWot

TransMORGrifier takes everything you know and love about old analog stompbox compressors, and adds some nice modern improvements to the tonal equation. Meaning, you can get the squish and the squash without having to sacrifice the natural body of your core tone. From transparent studio-like comp tones to overly compressed vintage chicken-picking tones, and anywhere in between. You’ll find it all in the TransMORGrifier!

Review by OVNI LABS

Demo by The ToneShack

Demo by Pedal Zone

TransMORGifier

The goal with the OnoMATOpoeia was to create a pedal that every player out there would benefit from having on their board. Something that would sweeten up the sound no matter if it was used subtly or shamelessly. The result: a unique and versatile boost/overdrive pedal that can do anything from adding a little push to lift solos or rhythms off the ground, to adding some glorious tube-like grit.
With the addition of a wide-ranging “seesaw” tone control and a saturation knob that changes the gain structure from loose, old-school and slightly fuzzy to tight and modern, this pedal has a tonal trick available for any musical trade out there.

Demo by ChrisPedalDemos

Demo by Teemu Rämö

Review by The Fretboard

OnoMATOpoeia

TransMORGrifier übernimmt alles, was Sie an klassischen Analogen Stompbox-Kompressoren lieben, und fügt einige moderne Verbesserungen in die klangliche Gleichung ein. Das bedeutet: Sie können das „Quetschen“ und „Zerdrücken“ bekommen, ohne den natürlichen Körper Ihres Grundsounds opfern zu müssen. Von transparenten Studio-Kompressionstönen bis hin zu übermäßig komprimierten Vintage-Chicken-Picking-Klangfarben, und alles dazwischen.

TransMORGrifier takes everything you know and love about old analog stompbox compressors, and adds some nice modern improvements to the tonal equation. Meaning, you can get the squish and the squash without having to sacrifice the natural body of your core tone. From transparent studio-like comp tones to overly compressed vintage chicken-picking tones, and anywhere in between. You’ll find it all in the TransMORGrifier!

*Versatile Ratio knob – From subtle studio comp tones to aggressive chicken-picking tones.
*High quality analog compression tones
*Wide frequency spectrum, making it suitable for any instrument. 
*Highly intuitive control set – dial in amazing tones quick and easy 
*Top-mounted I/O
*Handmade in Denmark
*True-Bypass switching

The secret to the TransMORGrifier’s superb tones and versatility is the highly transparent circuit it’s built on and the ratio knob. The ratio knob allows you to go from subtle to over-the-top compression in seconds flat, all while inflicting minimal coloration to your original tone.

So whether you just want to level things out a bit and add some subtle sustain or you wanna go all-in on cowboy hats, telecaster-twang and chicken-picking, the TransMORGrifier’s intuitive control set will take you there with ease.